* [PATCH 0/4] Implement device tree support for ab8500 BM Devices
@ 2012-10-31 15:40 Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V
` (4 more replies)
0 siblings, 5 replies; 13+ messages in thread
From: Rajanikanth H.V @ 2012-10-31 15:40 UTC (permalink / raw)
To: rob.herring, lee.jones, francescolavra.fl
Cc: arnd, anton.vorontsov, linus.walleij, linux-arm-kernel,
linux-kernel, linaro-dev, patches, STEricsson_nomadik_linux,
rajanikanth.hv
From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
This patch-set adds device tree binding for ab8500 battery-managed
devices. Removes the redundant platform structure maintained
across bm devices and implements common DT probe routine across all the
modules.
Test status:
a) Tested across 'legacy platform data' and DT binding support
a.1) ab8500_charger driver fails to get regulator in the
legacy platform mode.
b) Interrupt numbers assigned differs between legacy and FDT mode.
(a) Legacy platform_data Mode:
root@ME:/ cat /proc/interrupts
CPU0 CPU1
483: 0 0 ab8500 ab8500-ponkey-dbf
484: 0 0 ab8500 ab8500-ponkey-dbr
485: 0 0 ab8500 BATT_OVV
494: 0 1 ab8500
495: 0 0 ab8500 ab8500-rtc
501: 0 13 ab8500 NCONV_ACCU
503: 7 22 ab8500 CCEOC
504: 0 1 ab8500 CC_INT_CALIB
505: 0 0 ab8500 LOW_BAT_F
516: 0 34 ab8500 ab8500-gpadc
556: 0 0 ab8500 usb-link-status
(b) FDT Mode:
root@ME:/ cat /proc/interrupts
CPU0 CPU1
6: 0 0 ab8500 ab8500-ponkey-dbf
7: 0 0 ab8500 ab8500-ponkey-dbr
8: 0 0 ab8500 BATT_OVV
162: 0 7 ab8500 ab8500-gpadc
163: 0 1 ab8500
164: 0 0 ab8500 ab8500-rtc
484: 0 0 ab8500 usb-link-status
499: 0 4 ab8500 NCONV_ACCU
500: 0 0 ab8500 LOW_BAT_F
502: 0 1 ab8500 CC_INT_CALIB
503: 0 6 ab8500 CCEOC
c) Event handlers across bm-modules have been verified only
during 'battery discharge process' as 'battery charging process'
depends on ab8500-usb code
Rajanikanth H.V (4):
mfd: ab8500: add devicetree support for fuelgauge
mfd: ab8500: add devicetree support for btemp
mfd: ab8500: add devicetree support for charger
mfd: ab8500: add devicetree support for chargalg
Documentation/devicetree/bindings/mfd/ab8500.txt | 27 +-
.../bindings/power_supply/ab8500/btemp.txt | 16 +
.../bindings/power_supply/ab8500/chargalg.txt | 16 +
.../bindings/power_supply/ab8500/charger.txt | 25 +
.../devicetree/bindings/power_supply/ab8500/fg.txt | 58 +++
arch/arm/boot/dts/dbx5x0.dtsi | 28 +-
drivers/mfd/ab8500-core.c | 20 +
drivers/power/Kconfig | 6 -
drivers/power/Makefile | 2 +-
drivers/power/ab8500_bmdata.c | 518 ++++++++++++++++++++
drivers/power/ab8500_btemp.c | 76 +--
drivers/power/ab8500_charger.c | 83 ++--
drivers/power/ab8500_fg.c | 81 +--
drivers/power/abx500_chargalg.c | 56 ++-
include/linux/mfd/abx500.h | 34 +-
15 files changed, 881 insertions(+), 165 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
create mode 100644 drivers/power/ab8500_bmdata.c
--
1.7.10.4
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge
2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V
@ 2012-10-31 15:40 ` Rajanikanth H.V
2012-11-01 15:15 ` Francesco Lavra
2012-10-31 15:40 ` [PATCH 2/4] mfd: ab8500: add devicetree support for btemp Rajanikanth H.V
` (3 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Rajanikanth H.V @ 2012-10-31 15:40 UTC (permalink / raw)
To: rob.herring, lee.jones, francescolavra.fl
Cc: arnd, anton.vorontsov, linus.walleij, linux-arm-kernel,
linux-kernel, linaro-dev, patches, STEricsson_nomadik_linux,
rajanikanth.hv
From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
Note: of_probe() routine for battery managed devices is made
common across all bm drivers.
- test status:
- interrupt numbers assigned differs between legacy and FDT mode.
Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
---
Documentation/devicetree/bindings/mfd/ab8500.txt | 7 +-
.../devicetree/bindings/power_supply/ab8500/fg.txt | 58 +++
arch/arm/boot/dts/dbx5x0.dtsi | 12 +-
drivers/mfd/ab8500-core.c | 5 +
drivers/power/Makefile | 2 +-
drivers/power/ab8500_bmdata.c | 518 ++++++++++++++++++++
drivers/power/ab8500_btemp.c | 16 +-
drivers/power/ab8500_charger.c | 16 +-
drivers/power/ab8500_fg.c | 81 +--
drivers/power/abx500_chargalg.c | 8 +-
include/linux/mfd/abx500.h | 36 +-
11 files changed, 664 insertions(+), 95 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
create mode 100644 drivers/power/ab8500_bmdata.c
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index ce83c8d..6ca8d81 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -24,7 +24,12 @@ ab8500-bm : : : Battery Manager
ab8500-btemp : : : Battery Temperature
ab8500-charger : : : Battery Charger
ab8500-codec : : : Audio Codec
-ab8500-fg : : : Fuel Gauge
+ab8500-fg : : vddadc : Fuel Gauge
+ : NCONV_ACCU : : Accumulate N Sample Conversion
+ : BATT_OVV : : Battery Over Voltage
+ : LOW_BAT_F : : LOW threshold battery voltage
+ : CC_INT_CALIB : : Coulomb Counter Internal Calibration
+ : CCEOC : : Coulomb Counter End of Conversion
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
ab8500-gpio : : : GPIO Controller
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
new file mode 100644
index 0000000..ccafcb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
@@ -0,0 +1,58 @@
+=== AB8500 Fuel Gauge Driver ===
+
+AB8500 is a mixed signal multimedia and power management
+device comprising: power and energy-management-module,
+wall-charger, usb-charger, audio codec, general purpose adc,
+tvout, clock management and sim card interface.
+
+Fuelgauge support is part of energy-management-modules, other
+components of this module are:
+main-charger, usb-combo-charger and battery-temperature-monitoring.
+
+The properties below describes the node for fuelgauge driver.
+
+Required Properties:
+- compatible = This shall be: "stericsson,ab8500-fg"
+- battery = Shall be battery specific information
+ Example:
+ ab8500_fg {
+ compatible = "stericsson,ab8500-fg";
+ battery = <&ab8500_battery>;
+ };
+
+dependent node:
+ ab8500_battery: ab8500_battery {
+ };
+ This node will provide information on 'thermistor interface' and
+ 'battery technology type' used.
+
+Properties of this node are:
+thermistor-on-batctrl:
+ A boolean value indicating thermistor interface to battery
+
+ Note:
+ 'btemp' and 'batctrl' are the pins interfaced for battery temperature
+ measurement, 'btemp' signal is used when NTC(negative temperature
+ coefficient) resister is interfaced external to battery whereas
+ 'batctrl' pin is used when NTC resister is internal to battery.
+
+ Example:
+ ab8500_battery: ab8500_battery {
+ thermistor-on-batctrl;
+ };
+ indicates: NTC resister is internal to battery, 'batctrl' is used
+ for thermal measurement.
+
+ The absence of property 'thermal-on-batctrl' indicates
+ NTC resister is external to battery and 'btemp' signal is used
+ for thermal measurement.
+
+battery-type:
+ This shall be the battery manufacturing technology type,
+ allowed types are:
+ "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+ Example:
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ }
+
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 748ba7a..68317f5 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -352,7 +352,17 @@
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
- ab8500-usb {
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ thermistor-on-batctrl;
+ };
+
+ ab8500_fg {
+ compatible = "stericsson,ab8500-fg";
+ battery = <&ab8500_battery>;
+ };
+
+ ab8500_usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 0x4
96 0x4
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 1667c77..7c3017b 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1051,8 +1051,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
},
{
.name = "ab8500-fg",
+ .of_compatible = "stericsson,ab8500-fg",
.num_resources = ARRAY_SIZE(ab8500_fg_resources),
.resources = ab8500_fg_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
{
.name = "ab8500-chargalg",
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index ee58afb..2c58d4e 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
new file mode 100644
index 0000000..fa6ea52
--- /dev/null
+++ b/drivers/power/ab8500_bmdata.c
@@ -0,0 +1,518 @@
+#include <linux/export.h>
+#include <linux/power_supply.h>
+#include <linux/of.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+
+/*
+ * These are the defined batteries that uses a NTC and ID resistor placed
+ * inside of the battery pack.
+ * Note that the res_to_temp table must be strictly sorted by falling resistance
+ * values to work.
+ */
+static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
+ {-5, 53407},
+ { 0, 48594},
+ { 5, 43804},
+ {10, 39188},
+ {15, 34870},
+ {20, 30933},
+ {25, 27422},
+ {30, 24347},
+ {35, 21694},
+ {40, 19431},
+ {45, 17517},
+ {50, 15908},
+ {55, 14561},
+ {60, 13437},
+ {65, 12500},
+};
+static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
+ {-5, 165418},
+ { 0, 159024},
+ { 5, 151921},
+ {10, 144300},
+ {15, 136424},
+ {20, 128565},
+ {25, 120978},
+ {30, 113875},
+ {35, 107397},
+ {40, 101629},
+ {45, 96592},
+ {50, 92253},
+ {55, 88569},
+ {60, 85461},
+ {65, 82869},
+};
+static struct abx500_v_to_cap cap_tbl_A_thermistor[] = {
+ {4171, 100},
+ {4114, 95},
+ {4009, 83},
+ {3947, 74},
+ {3907, 67},
+ {3863, 59},
+ {3830, 56},
+ {3813, 53},
+ {3791, 46},
+ {3771, 33},
+ {3754, 25},
+ {3735, 20},
+ {3717, 17},
+ {3681, 13},
+ {3664, 8},
+ {3651, 6},
+ {3635, 5},
+ {3560, 3},
+ {3408, 1},
+ {3247, 0},
+};
+static struct abx500_v_to_cap cap_tbl_B_thermistor[] = {
+ {4161, 100},
+ {4124, 98},
+ {4044, 90},
+ {4003, 85},
+ {3966, 80},
+ {3933, 75},
+ {3888, 67},
+ {3849, 60},
+ {3813, 55},
+ {3787, 47},
+ {3772, 30},
+ {3751, 25},
+ {3718, 20},
+ {3681, 16},
+ {3660, 14},
+ {3589, 10},
+ {3546, 7},
+ {3495, 4},
+ {3404, 2},
+ {3250, 0},
+};
+
+static struct abx500_v_to_cap cap_tbl[] = {
+ {4186, 100},
+ {4163, 99},
+ {4114, 95},
+ {4068, 90},
+ {3990, 80},
+ {3926, 70},
+ {3898, 65},
+ {3866, 60},
+ {3833, 55},
+ {3812, 50},
+ {3787, 40},
+ {3768, 30},
+ {3747, 25},
+ {3730, 20},
+ {3705, 15},
+ {3699, 14},
+ {3684, 12},
+ {3672, 9},
+ {3657, 7},
+ {3638, 6},
+ {3556, 4},
+ {3424, 2},
+ {3317, 1},
+ {3094, 0},
+};
+
+/*
+ * Note that the res_to_temp table must be strictly sorted by falling
+ * resistance values to work.
+ */
+static struct abx500_res_to_temp temp_tbl[] = {
+ {-5, 214834},
+ { 0, 162943},
+ { 5, 124820},
+ {10, 96520},
+ {15, 75306},
+ {20, 59254},
+ {25, 47000},
+ {30, 37566},
+ {35, 30245},
+ {40, 24520},
+ {45, 20010},
+ {50, 16432},
+ {55, 13576},
+ {60, 11280},
+ {65, 9425},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
+ { 40, 120},
+ { 30, 135},
+ { 20, 165},
+ { 10, 230},
+ { 00, 325},
+ {-10, 445},
+ {-20, 595},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
+ { 60, 300},
+ { 30, 300},
+ { 20, 300},
+ { 10, 300},
+ { 00, 300},
+ {-10, 300},
+ {-20, 300},
+};
+
+/* battery resistance table for LI ION 9100 battery */
+struct batres_vs_temp temp_to_batres_tbl_9100[] = {
+ { 60, 180},
+ { 30, 180},
+ { 20, 180},
+ { 10, 180},
+ { 00, 180},
+ {-10, 180},
+ {-20, 180},
+};
+
+struct abx500_battery_type bat_type_thermistor[] = {
+[BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 53407,
+ .resis_low = 12500,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
+ .r_to_t_tbl = temp_tbl_A_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
+ .v_to_cap_tbl = cap_tbl_A_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 165418,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
+ .r_to_t_tbl = temp_tbl_B_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
+ .v_to_cap_tbl = cap_tbl_B_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+};
+
+struct abx500_battery_type bat_type_ext_thermistor[] = {
+[BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+/*
+ * These are the batteries that doesn't have an internal NTC resistor to measure
+ * its temperature. The temperature in this case is measure with a NTC placed
+ * near the battery but on the PCB.
+ */
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+};
+
+static const struct abx500_bm_capacity_levels cap_levels = {
+ .critical = 2,
+ .low = 10,
+ .normal = 70,
+ .high = 95,
+ .full = 100,
+};
+
+static const struct abx500_fg_parameters fg = {
+ .recovery_sleep_timer = 10,
+ .recovery_total_time = 100,
+ .init_timer = 1,
+ .init_discard_time = 5,
+ .init_total_time = 40,
+ .high_curr_time = 60,
+ .accu_charging = 30,
+ .accu_high_curr = 30,
+ .high_curr_threshold = 50,
+ .lowbat_threshold = 3100,
+ .battok_falling_th_sel0 = 2860,
+ .battok_raising_th_sel1 = 2860,
+ .user_cap_limit = 15,
+ .maint_thres = 97,
+};
+
+static const struct abx500_maxim_parameters maxi_params = {
+ .ena_maxi = true,
+ .chg_curr = 910,
+ .wait_cycles = 10,
+ .charger_curr_step = 100,
+};
+
+static const struct abx500_bm_charger_parameters chg = {
+ .usb_volt_max = 5500,
+ .usb_curr_max = 1500,
+ .ac_volt_max = 7500,
+ .ac_curr_max = 1500,
+};
+
+struct abx500_bm_data ab8500_bm_data = {
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = 3,
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 34,
+ .maxi = &maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
+};
+
+int __devinit
+bmdevs_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data **battery)
+{
+ struct abx500_battery_type *btype;
+ struct device_node *np_bat_supply;
+ struct abx500_bm_data *bat;
+ const char *btech;
+ char bat_tech[8];
+ int i, thermistor;
+
+ *battery = &ab8500_bm_data;
+
+ /* get phandle to 'battery-info' node */
+ np_bat_supply = of_parse_phandle(np, "battery", 0);
+ if (!np_bat_supply) {
+ dev_err(dev, "missing property battery\n");
+ return -EINVAL;
+ }
+ if (of_property_read_bool(np_bat_supply,
+ "thermistor-on-batctrl"))
+ thermistor = NTC_INTERNAL;
+ else
+ thermistor = NTC_EXTERNAL;
+
+ bat = *battery;
+ if (thermistor == NTC_EXTERNAL) {
+ bat->n_btypes = 4;
+ bat->bat_type = bat_type_ext_thermistor;
+ bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
+ }
+ btech = of_get_property(np_bat_supply,
+ "stericsson,battery-type", NULL);
+ if (!btech) {
+ dev_warn(dev, "missing property battery-name/type\n");
+ strcpy(bat_tech, "UNKNOWN");
+ } else {
+ strcpy(bat_tech, btech);
+ }
+
+ if (strncmp(bat_tech, "LION", 4) == 0) {
+ bat->no_maintenance = true;
+ bat->chg_unknown_bat = true;
+ bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+ bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
+ bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130;
+ bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
+ bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
+ }
+ /* select the battery resolution table */
+ for (i = 0; i < bat->n_btypes; ++i) {
+ btype = (bat->bat_type + i);
+ if (thermistor == NTC_EXTERNAL) {
+ btype->batres_tbl =
+ temp_to_batres_tbl_ext_thermistor;
+ } else if (strncmp(bat_tech, "LION", 4) == 0) {
+ btype->batres_tbl =
+ temp_to_batres_tbl_9100;
+ } else {
+ btype->batres_tbl =
+ temp_to_batres_tbl_thermistor;
+ }
+ }
+ of_node_put(np_bat_supply);
+ return 0;
+}
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index bba3cca..803870e 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -93,7 +93,7 @@ struct ab8500_btemp {
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_btemp_platform_data *pdata;
+ struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
@@ -962,10 +962,10 @@ static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
{
+ struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
- struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
- struct ab8500_btemp *di;
if (!plat_data) {
dev_err(&pdev->dev, "No platform data\n");
@@ -982,21 +982,13 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
/* get btemp specific platform data */
- di->pdata = plat_data->btemp;
+ di->pdata = plat_data;
if (!di->pdata) {
dev_err(di->dev, "no btemp platform data supplied\n");
ret = -EINVAL;
goto free_device_info;
}
- /* get battery specific platform data */
- di->bat = plat_data->battery;
- if (!di->bat) {
- dev_err(di->dev, "no battery platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index d4f0c98..78a730c 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -220,7 +220,7 @@ struct ab8500_charger {
bool autopower;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_charger_platform_data *pdata;
+ struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
@@ -2533,9 +2533,9 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
static int __devinit ab8500_charger_probe(struct platform_device *pdev)
{
- int irq, i, charger_status, ret = 0;
- struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
struct ab8500_charger *di;
+ int irq, i, charger_status, ret = 0;
if (!plat_data) {
dev_err(&pdev->dev, "No platform data\n");
@@ -2555,21 +2555,13 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
spin_lock_init(&di->usb_state.usb_lock);
/* get charger specific platform data */
- di->pdata = plat_data->charger;
+ di->pdata = plat_data;
if (!di->pdata) {
dev_err(di->dev, "no charger platform data supplied\n");
ret = -EINVAL;
goto free_device_info;
}
- /* get battery specific platform data */
- di->bat = plat_data->battery;
- if (!di->bat) {
- dev_err(di->dev, "no battery platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
di->autopower = false;
/* AC supply */
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index bf02225..3207154 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -22,15 +22,16 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/kobject.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500.h>
#include <linux/slab.h>
-#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/delay.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
-#include <linux/mfd/abx500.h>
#include <linux/time.h>
+#include <linux/of.h>
#include <linux/completion.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
#define MILLI_TO_MICRO 1000
#define FG_LSB_IN_MA 1627
@@ -172,7 +173,6 @@ struct inst_curr_result_list {
* @avg_cap: Average capacity filter
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @pdata: Pointer to the abx500_fg platform data
* @bat: Pointer to the abx500_bm platform data
* @fg_psy: Structure that holds the FG specific battery properties
* @fg_wq: Work queue for running the FG algorithm
@@ -212,7 +212,6 @@ struct ab8500_fg {
struct ab8500_fg_avg_cap avg_cap;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_fg_platform_data *pdata;
struct abx500_bm_data *bat;
struct power_supply fg_psy;
struct workqueue_struct *fg_wq;
@@ -2429,7 +2428,6 @@ static int __devexit ab8500_fg_remove(struct platform_device *pdev)
flush_scheduled_work();
power_supply_unregister(&di->fg_psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return ret;
}
@@ -2442,21 +2440,39 @@ static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
{"CCEOC", ab8500_fg_cc_data_end_handler},
};
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_usb",
+};
+
static int __devinit ab8500_fg_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct ab8500_fg *di;
int i, irq;
int ret = 0;
- struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
- struct ab8500_fg *di;
-
- if (!plat_data) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
- }
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di)
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__);
return -ENOMEM;
+ }
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_fg\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ }
mutex_init(&di->cc_lock);
@@ -2465,29 +2481,13 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- /* get fg specific platform data */
- di->pdata = plat_data->fg;
- if (!di->pdata) {
- dev_err(di->dev, "no fg platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
- /* get battery specific platform data */
- di->bat = plat_data->battery;
- if (!di->bat) {
- dev_err(di->dev, "no battery platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
di->fg_psy.name = "ab8500_fg";
di->fg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
di->fg_psy.properties = ab8500_fg_props;
di->fg_psy.num_properties = ARRAY_SIZE(ab8500_fg_props);
di->fg_psy.get_property = ab8500_fg_get_property;
- di->fg_psy.supplied_to = di->pdata->supplied_to;
- di->fg_psy.num_supplicants = di->pdata->num_supplicants;
+ di->fg_psy.supplied_to = supply_interface;
+ di->fg_psy.num_supplicants = ARRAY_SIZE(supply_interface),
di->fg_psy.external_power_changed = ab8500_fg_external_power_changed;
di->bat_cap.max_mah_design = MILLI_TO_MICRO *
@@ -2506,7 +2506,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq");
if (di->fg_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for running the fg algorithm instantly */
@@ -2605,12 +2605,14 @@ free_irq:
}
free_inst_curr_wq:
destroy_workqueue(di->fg_wq);
-free_device_info:
- kfree(di);
-
return ret;
}
+static const struct of_device_id ab8500_fg_match[] = {
+ { .compatible = "stericsson,ab8500-fg", },
+ { },
+};
+
static struct platform_driver ab8500_fg_driver = {
.probe = ab8500_fg_probe,
.remove = __devexit_p(ab8500_fg_remove),
@@ -2619,6 +2621,7 @@ static struct platform_driver ab8500_fg_driver = {
.driver = {
.name = "ab8500-fg",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_fg_match,
},
};
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 804b88c..88b5cc1 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -231,7 +231,7 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_chargalg_platform_data *pdata;
+ struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
@@ -1802,7 +1802,7 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
{
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bmdevs_plat_data *plat_data;
int ret = 0;
struct abx500_chargalg *di =
@@ -1812,10 +1812,8 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
/* get device struct */
di->dev = &pdev->dev;
-
plat_data = pdev->dev.platform_data;
- di->pdata = plat_data->chargalg;
- di->bat = plat_data->battery;
+ di->pdata = plat_data;
/* chargalg supply */
di->chargalg_psy.name = "abx500_chargalg";
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 1318ca6..bbf3ad6 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -382,39 +382,27 @@ struct abx500_bm_data {
int gnd_lift_resistance;
const struct abx500_maxim_parameters *maxi;
const struct abx500_bm_capacity_levels *cap_levels;
- const struct abx500_battery_type *bat_type;
+ struct abx500_battery_type *bat_type;
const struct abx500_bm_charger_parameters *chg_params;
const struct abx500_fg_parameters *fg_params;
};
-struct abx500_chargalg_platform_data {
- char **supplied_to;
- size_t num_supplicants;
-};
-
-struct abx500_charger_platform_data {
- char **supplied_to;
- size_t num_supplicants;
- bool autopower_cfg;
-};
+extern struct abx500_bm_data ab8500_bm_data;
-struct abx500_btemp_platform_data {
- char **supplied_to;
- size_t num_supplicants;
+struct abx500_bmdevs_plat_data {
+ char **supplied_to;
+ size_t num_supplicants;
+ bool autopower_cfg;
};
-struct abx500_fg_platform_data {
- char **supplied_to;
- size_t num_supplicants;
+enum {
+ NTC_EXTERNAL = 0,
+ NTC_INTERNAL,
};
-struct abx500_bm_plat_data {
- struct abx500_bm_data *battery;
- struct abx500_charger_platform_data *charger;
- struct abx500_btemp_platform_data *btemp;
- struct abx500_fg_platform_data *fg;
- struct abx500_chargalg_platform_data *chargalg;
-};
+int bmdevs_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data **battery);
int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
u8 value);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/4] mfd: ab8500: add devicetree support for btemp
2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V
@ 2012-10-31 15:40 ` Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 3/4] mfd: ab8500: add devicetree support for charger Rajanikanth H.V
` (2 subsequent siblings)
4 siblings, 0 replies; 13+ messages in thread
From: Rajanikanth H.V @ 2012-10-31 15:40 UTC (permalink / raw)
To: rob.herring, lee.jones, francescolavra.fl
Cc: arnd, anton.vorontsov, linus.walleij, linux-arm-kernel,
linux-kernel, linaro-dev, patches, STEricsson_nomadik_linux,
rajanikanth.hv
From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
This patch adds device tree support for
battery-temperature-monitor driver
Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
---
Documentation/devicetree/bindings/mfd/ab8500.txt | 6 ++
.../bindings/power_supply/ab8500/btemp.txt | 16 +++++
arch/arm/boot/dts/dbx5x0.dtsi | 5 ++
drivers/mfd/ab8500-core.c | 5 ++
drivers/power/Kconfig | 6 --
drivers/power/ab8500_bmdata.c | 4 +-
drivers/power/ab8500_btemp.c | 66 ++++++++++++--------
7 files changed, 73 insertions(+), 35 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 6ca8d81..f2ee0e7 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -30,6 +30,12 @@ ab8500-fg : : vddadc : Fuel Gauge
: LOW_BAT_F : : LOW threshold battery voltage
: CC_INT_CALIB : : Coulomb Counter Internal Calibration
: CCEOC : : Coulomb Counter End of Conversion
+ab8500-btemp : : vtvout : Battery Temperature
+ : BAT_CTRL_INDB : : Battery Removal Indicator
+ : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
+ : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
+ : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
+ : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
ab8500-gpio : : : GPIO Controller
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
new file mode 100644
index 0000000..0ba1bcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
@@ -0,0 +1,16 @@
+=== AB8500 Battery Temperature Monitor Driver ===
+
+The properties below describes the node for btemp driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-btemp"
+- battery = Shall be battery specific information
+
+ Example:
+ ab8500_btemp {
+ compatible = "stericsson,ab8500-btemp";
+ battery = <&ab8500_battery>;
+ };
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 68317f5..79fdee4 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -362,6 +362,11 @@
battery = <&ab8500_battery>;
};
+ ab8500_btemp {
+ compatible = "stericsson,ab8500-btemp";
+ battery = <&ab8500_battery>;
+ };
+
ab8500_usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 0x4
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 7c3017b..94d45be 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1046,8 +1046,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
},
{
.name = "ab8500-btemp",
+ .of_compatible = "stericsson,ab8500-btemp",
.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
.resources = ab8500_btemp_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
{
.name = "ab8500-fg",
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index c1892f3..1434871 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -304,12 +304,6 @@ config AB8500_BM
help
Say Y to include support for AB8500 battery management.
-config AB8500_BATTERY_THERM_ON_BATCTRL
- bool "Thermistor connected on BATCTRL ADC"
- depends on AB8500_BM
- help
- Say Y to enable battery temperature measurements using
- thermistor connected on BATCTRL ADC.
endif # POWER_SUPPLY
source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index fa6ea52..1e3a0e3 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -29,7 +29,7 @@ static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
{65, 12500},
};
static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
- {-5, 165418},
+ {-5, 200000},
{ 0, 159024},
{ 5, 151921},
{10, 144300},
@@ -237,7 +237,7 @@ struct abx500_battery_type bat_type_thermistor[] = {
},
{
.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 165418,
+ .resis_high = 200000,
.resis_low = 82869,
.battery_resistance = 300,
.charge_full_design = 900,
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 803870e..a6633b4 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -20,11 +20,13 @@
#include <linux/power_supply.h>
#include <linux/completion.h>
#include <linux/workqueue.h>
-#include <linux/mfd/abx500/ab8500.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/abx500/ab8500-gpadc.h>
-#include <linux/jiffies.h>
#define VTVOUT_V 1800
@@ -76,7 +78,6 @@ struct ab8500_btemp_ranges {
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
- * @pdata: Pointer to the abx500_btemp platform data
* @bat: Pointer to the abx500_bm platform data
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
@@ -93,7 +94,6 @@ struct ab8500_btemp {
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
@@ -955,48 +955,57 @@ static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
flush_scheduled_work();
power_supply_unregister(&di->btemp_psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_fg",
+};
+
static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
{
- struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
- if (!plat_data) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
- }
-
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di)
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
return -ENOMEM;
+ }
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ }
/* get parent data */
di->dev = &pdev->dev;
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- /* get btemp specific platform data */
- di->pdata = plat_data;
- if (!di->pdata) {
- dev_err(di->dev, "no btemp platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
di->btemp_psy.properties = ab8500_btemp_props;
di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props);
di->btemp_psy.get_property = ab8500_btemp_get_property;
- di->btemp_psy.supplied_to = di->pdata->supplied_to;
- di->btemp_psy.num_supplicants = di->pdata->num_supplicants;
+ di->btemp_psy.supplied_to = supply_interface;
+ di->btemp_psy.num_supplicants = ARRAY_SIZE(supply_interface);
di->btemp_psy.external_power_changed =
ab8500_btemp_external_power_changed;
@@ -1006,7 +1015,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
create_singlethread_workqueue("ab8500_btemp_wq");
if (di->btemp_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for measuring temperature periodically */
@@ -1084,12 +1093,14 @@ free_irq:
}
free_btemp_wq:
destroy_workqueue(di->btemp_wq);
-free_device_info:
- kfree(di);
-
return ret;
}
+static const struct of_device_id ab8500_btemp_match[] = {
+ { .compatible = "stericsson,ab8500-btemp", },
+ { },
+};
+
static struct platform_driver ab8500_btemp_driver = {
.probe = ab8500_btemp_probe,
.remove = __devexit_p(ab8500_btemp_remove),
@@ -1098,6 +1109,7 @@ static struct platform_driver ab8500_btemp_driver = {
.driver = {
.name = "ab8500-btemp",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_btemp_match,
},
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/4] mfd: ab8500: add devicetree support for charger
2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 2/4] mfd: ab8500: add devicetree support for btemp Rajanikanth H.V
@ 2012-10-31 15:40 ` Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg Rajanikanth H.V
2012-11-19 3:46 ` [PATCH 0/4] Implement device tree support for ab8500 BM Devices Anton Vorontsov
4 siblings, 0 replies; 13+ messages in thread
From: Rajanikanth H.V @ 2012-10-31 15:40 UTC (permalink / raw)
To: rob.herring, lee.jones, francescolavra.fl
Cc: arnd, anton.vorontsov, linus.walleij, linux-arm-kernel,
linux-kernel, linaro-dev, patches, STEricsson_nomadik_linux,
rajanikanth.hv
From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
This patch adds device tree support for ab8500-charger
driver
Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
---
Documentation/devicetree/bindings/mfd/ab8500.txt | 14 ++++
.../bindings/power_supply/ab8500/charger.txt | 25 +++++++
arch/arm/boot/dts/dbx5x0.dtsi | 6 ++
drivers/mfd/ab8500-core.c | 5 ++
drivers/power/ab8500_charger.c | 73 ++++++++++++--------
5 files changed, 95 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index f2ee0e7..13b707b 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -36,6 +36,20 @@ ab8500-btemp : : vtvout : Battery Temperature
: BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
: BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
: BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+ab8500-charger : : vddadc : Charger interface
+ : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
+ : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
+ : MAIN_EXT_CH_NOT_OK : : main charger not OK
+ : MAIN_CH_TH_PROT_R : : Die temp is above main charger
+ : MAIN_CH_TH_PROT_F : : Die temp is below main charger
+ : VBUS_DET_F : : VBUS falling detected
+ : VBUS_DET_R : : VBUS rising detected
+ : USB_LINK_STATUS : : USB link status has changed
+ : USB_CH_TH_PROT_R : : Die temp is above usb charger
+ : USB_CH_TH_PROT_F : : Die temp is below usb charger
+ : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
+ : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
+ : CH_WD_EXP : : Charger watchdog detected
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
ab8500-gpio : : : GPIO Controller
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
new file mode 100644
index 0000000..6bdbb08
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
@@ -0,0 +1,25 @@
+=== AB8500 Charger Driver ===
+
+Required Properties:
+- compatible = Shall be "stericsson,ab8500-charger"
+- battery = Shall be battery specific information
+ Example:
+ ab8500_charger {
+ compatible = "stericsson,ab8500-charger";
+ battery = <&ab8500_battery>;
+ };
+
+- vddadc-supply: Supply for USB and Main charger
+ Example:
+ ab8500-charger {
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ }
+- autopower_cfg:
+ Boolean value depicting the presence of 'automatic poweron after powerloss'
+ Example:
+ ab8500-charger {
+ autopower_cfg;
+ };
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 79fdee4..b1ecb5d 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -367,6 +367,12 @@
battery = <&ab8500_battery>;
};
+ ab8500_charger {
+ compatible = "stericsson,ab8500-charger";
+ battery = <&ab8500_battery>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
ab8500_usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 0x4
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 94d45be..c7a120b 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1041,8 +1041,13 @@ static struct mfd_cell __devinitdata abx500_common_devs[] = {
static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
{
.name = "ab8500-charger",
+ .of_compatible = "stericsson,ab8500-charger",
.num_resources = ARRAY_SIZE(ab8500_charger_resources),
.resources = ab8500_charger_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
{
.name = "ab8500-btemp",
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 78a730c..a140564 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -23,6 +23,8 @@
#include <linux/err.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
@@ -181,9 +183,9 @@ struct ab8500_charger_usb_state {
* @vbat Battery voltage
* @old_vbat Previously measured battery voltage
* @autopower Indicate if we should have automatic pwron after pwrloss
+ * @autopower_cfg platform specific power config support for "pwron after pwrloss"
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @pdata: Pointer to the abx500_charger platform data
* @bat: Pointer to the abx500_bm platform data
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
@@ -218,9 +220,9 @@ struct ab8500_charger {
int vbat;
int old_vbat;
bool autopower;
+ bool autopower_cfg;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
@@ -322,7 +324,7 @@ static void ab8500_power_loss_handling(struct ab8500_charger *di)
static void ab8500_power_supply_changed(struct ab8500_charger *di,
struct power_supply *psy)
{
- if (di->pdata->autopower_cfg) {
+ if (di->autopower_cfg) {
if (!di->usb.charger_connected &&
!di->ac.charger_connected &&
di->autopower) {
@@ -2526,25 +2528,45 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
power_supply_unregister(&di->usb_chg.psy);
power_supply_unregister(&di->ac_chg.psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_fg",
+ "ab8500_btemp",
+};
+
static int __devinit ab8500_charger_probe(struct platform_device *pdev)
{
- struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct ab8500_charger *di;
int irq, i, charger_status, ret = 0;
- if (!plat_data) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
- }
-
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di)
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
return -ENOMEM;
+ }
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_charger\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ di->autopower_cfg = false;
+ }
/* get parent data */
di->dev = &pdev->dev;
@@ -2554,14 +2576,6 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
/* initialize lock */
spin_lock_init(&di->usb_state.usb_lock);
- /* get charger specific platform data */
- di->pdata = plat_data;
- if (!di->pdata) {
- dev_err(di->dev, "no charger platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
di->autopower = false;
/* AC supply */
@@ -2571,8 +2585,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
di->ac_chg.psy.properties = ab8500_charger_ac_props;
di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props);
di->ac_chg.psy.get_property = ab8500_charger_ac_get_property;
- di->ac_chg.psy.supplied_to = di->pdata->supplied_to;
- di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants;
+ di->ac_chg.psy.supplied_to = supply_interface;
+ di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->ac_chg.ops.enable = &ab8500_charger_ac_en;
di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
@@ -2589,8 +2603,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
di->usb_chg.psy.properties = ab8500_charger_usb_props;
di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props);
di->usb_chg.psy.get_property = ab8500_charger_usb_get_property;
- di->usb_chg.psy.supplied_to = di->pdata->supplied_to;
- di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants;
+ di->usb_chg.psy.supplied_to = supply_interface;
+ di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->usb_chg.ops.enable = &ab8500_charger_usb_en;
di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
@@ -2606,7 +2620,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
create_singlethread_workqueue("ab8500_charger_wq");
if (di->charger_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for HW failure check */
@@ -2748,12 +2762,14 @@ free_regulator:
regulator_put(di->regu);
free_charger_wq:
destroy_workqueue(di->charger_wq);
-free_device_info:
- kfree(di);
-
return ret;
}
+static const struct of_device_id ab8500_charger_match[] = {
+ { .compatible = "stericsson,ab8500-charger", },
+ { },
+};
+
static struct platform_driver ab8500_charger_driver = {
.probe = ab8500_charger_probe,
.remove = __devexit_p(ab8500_charger_remove),
@@ -2762,6 +2778,7 @@ static struct platform_driver ab8500_charger_driver = {
.driver = {
.name = "ab8500-charger",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_charger_match,
},
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg
2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V
` (2 preceding siblings ...)
2012-10-31 15:40 ` [PATCH 3/4] mfd: ab8500: add devicetree support for charger Rajanikanth H.V
@ 2012-10-31 15:40 ` Rajanikanth H.V
2012-11-19 3:46 ` [PATCH 0/4] Implement device tree support for ab8500 BM Devices Anton Vorontsov
4 siblings, 0 replies; 13+ messages in thread
From: Rajanikanth H.V @ 2012-10-31 15:40 UTC (permalink / raw)
To: rob.herring, lee.jones, francescolavra.fl
Cc: arnd, anton.vorontsov, linus.walleij, linux-arm-kernel,
linux-kernel, linaro-dev, patches, STEricsson_nomadik_linux,
rajanikanth.hv
From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
This patch adds device tree support for charging algorithm
driver
Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
---
.../bindings/power_supply/ab8500/chargalg.txt | 16 ++++++
arch/arm/boot/dts/dbx5x0.dtsi | 5 ++
drivers/mfd/ab8500-core.c | 5 ++
drivers/power/abx500_chargalg.c | 54 ++++++++++++++------
include/linux/mfd/abx500.h | 6 ---
5 files changed, 64 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
new file mode 100644
index 0000000..ef53283
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
@@ -0,0 +1,16 @@
+=== AB8500 Charging Algorithm Driver ===
+
+The properties below describes the node for chargalg driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-chargalg"
+- battery = Shall be battery specific information
+
+Example:
+ab8500_chargalg {
+ compatible = "stericsson,ab8500-chargalg";
+ battery = <&ab8500_battery>;
+};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index b1ecb5d..a678afa 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -373,6 +373,11 @@
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
+ ab8500_chargalg {
+ compatible = "stericsson,ab8500-chargalg";
+ battery = <&ab8500_battery>;
+ };
+
ab8500_usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 0x4
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index c7a120b..5ec70f2 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1071,8 +1071,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
},
{
.name = "ab8500-chargalg",
+ .of_compatible = "stericsson,ab8500-chargalg",
.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
.resources = ab8500_chargalg_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
};
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 88b5cc1..c603556 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -21,6 +21,8 @@
#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/mfd/abx500/ab8500-bm.h>
@@ -205,7 +207,6 @@ enum maxim_ret {
* @chg_info: information about connected charger types
* @batt_data: data of the battery
* @susp_status: current charger suspension status
- * @pdata: pointer to the abx500_chargalg platform data
* @bat: pointer to the abx500_bm platform data
* @chargalg_psy: structure that holds the battery properties exposed by
* the charging algorithm
@@ -231,7 +232,6 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
@@ -1795,25 +1795,44 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
flush_scheduled_work();
power_supply_unregister(&di->chargalg_psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
+static char *supply_interface[] = {
+ "ab8500_fg",
+};
+
static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
{
- struct abx500_bmdevs_plat_data *plat_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_chargalg *di;
int ret = 0;
- struct abx500_chargalg *di =
- kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
- if (!di)
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
return -ENOMEM;
+ }
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ }
/* get device struct */
di->dev = &pdev->dev;
- plat_data = pdev->dev.platform_data;
- di->pdata = plat_data;
/* chargalg supply */
di->chargalg_psy.name = "abx500_chargalg";
@@ -1821,8 +1840,8 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
di->chargalg_psy.properties = abx500_chargalg_props;
di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
di->chargalg_psy.get_property = abx500_chargalg_get_property;
- di->chargalg_psy.supplied_to = di->pdata->supplied_to;
- di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
+ di->chargalg_psy.supplied_to = supply_interface;
+ di->chargalg_psy.num_supplicants = ARRAY_SIZE(supply_interface),
di->chargalg_psy.external_power_changed =
abx500_chargalg_external_power_changed;
@@ -1842,7 +1861,7 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
create_singlethread_workqueue("abx500_chargalg_wq");
if (di->chargalg_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for chargalg */
@@ -1883,20 +1902,23 @@ free_psy:
power_supply_unregister(&di->chargalg_psy);
free_chargalg_wq:
destroy_workqueue(di->chargalg_wq);
-free_device_info:
- kfree(di);
-
return ret;
}
+static const struct of_device_id ab8500_chargalg_match[] = {
+ { .compatible = "stericsson,ab8500-chargalg", },
+ { },
+};
+
static struct platform_driver abx500_chargalg_driver = {
.probe = abx500_chargalg_probe,
.remove = __devexit_p(abx500_chargalg_remove),
.suspend = abx500_chargalg_suspend,
.resume = abx500_chargalg_resume,
.driver = {
- .name = "abx500-chargalg",
+ .name = "ab8500-chargalg",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_chargalg_match,
},
};
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index bbf3ad6..a14c1a6 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -389,12 +389,6 @@ struct abx500_bm_data {
extern struct abx500_bm_data ab8500_bm_data;
-struct abx500_bmdevs_plat_data {
- char **supplied_to;
- size_t num_supplicants;
- bool autopower_cfg;
-};
-
enum {
NTC_EXTERNAL = 0,
NTC_INTERNAL,
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge
2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V
@ 2012-11-01 15:15 ` Francesco Lavra
2012-11-07 18:45 ` Rajanikanth H V
0 siblings, 1 reply; 13+ messages in thread
From: Francesco Lavra @ 2012-11-01 15:15 UTC (permalink / raw)
To: Rajanikanth H.V
Cc: rob.herring, lee.jones, arnd, anton.vorontsov, linus.walleij,
linux-arm-kernel, linux-kernel, linaro-dev, patches,
STEricsson_nomadik_linux, rajanikanth.hv
On 10/31/2012 04:40 PM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
>
> - This patch adds device tree support for fuelgauge driver
> - optimize bm devices platform_data usage and of_probe(...)
> Note: of_probe() routine for battery managed devices is made
> common across all bm drivers.
> - test status:
> - interrupt numbers assigned differs between legacy and FDT mode.
>
> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
[...]
> +int __devinit
> +bmdevs_of_probe(struct device *dev,
> + struct device_node *np,
> + struct abx500_bm_data **battery)
> +{
> + struct abx500_battery_type *btype;
> + struct device_node *np_bat_supply;
> + struct abx500_bm_data *bat;
> + const char *btech;
> + char bat_tech[8];
> + int i, thermistor;
> +
> + *battery = &ab8500_bm_data;
> +
> + /* get phandle to 'battery-info' node */
> + np_bat_supply = of_parse_phandle(np, "battery", 0);
> + if (!np_bat_supply) {
> + dev_err(dev, "missing property battery\n");
> + return -EINVAL;
> + }
> + if (of_property_read_bool(np_bat_supply,
> + "thermistor-on-batctrl"))
> + thermistor = NTC_INTERNAL;
> + else
> + thermistor = NTC_EXTERNAL;
> +
> + bat = *battery;
> + if (thermistor == NTC_EXTERNAL) {
> + bat->n_btypes = 4;
> + bat->bat_type = bat_type_ext_thermistor;
> + bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
> + }
> + btech = of_get_property(np_bat_supply,
> + "stericsson,battery-type", NULL);
> + if (!btech) {
> + dev_warn(dev, "missing property battery-name/type\n");
> + strcpy(bat_tech, "UNKNOWN");
> + } else {
> + strcpy(bat_tech, btech);
> + }
I don't get the point of declaring the char array and copying the string
in it, when you could simply use just the pointer returned by
of_get_property().
Anyway, if the string property is longer than 8 characters, you are
writing past the size of the destination array.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge
2012-11-01 15:15 ` Francesco Lavra
@ 2012-11-07 18:45 ` Rajanikanth H V
2012-11-10 16:53 ` Francesco Lavra
0 siblings, 1 reply; 13+ messages in thread
From: Rajanikanth H V @ 2012-11-07 18:45 UTC (permalink / raw)
To: Francesco Lavra
Cc: Rajanikanth H.V, rob.herring, lee.jones, arnd, anton.vorontsov,
linus.walleij, linux-arm-kernel, linux-kernel, linaro-dev,
patches, STEricsson_nomadik_linux, rajanikanth.hv
On Thu, 1 Nov 2012, Francesco Lavra wrote:
[...]
>> + btech = of_get_property(np_bat_supply,
>> + "stericsson,battery-type", NULL);
>> + if (!btech) {
>> + dev_warn(dev, "missing property battery-name/type\n");
>> + strcpy(bat_tech, "UNKNOWN");
>> + } else {
>> + strcpy(bat_tech, btech);
>> + }
>
> I don't get the point of declaring the char array and copying the string
> in it, when you could simply use just the pointer returned by
> of_get_property().
I am considering a corner case where in 'battery-type' property is not
present and battery is connected.In this case i promote battery to
UNKNOWN from null.
FYI: Further, btemp driver will identify the connected battery based on
resistance value and decide to use.
Ref: ab8500_btemp_id(...) ab8500_btemp.c
> Anyway, if the string property is longer than 8 characters, you are
> writing past the size of the destination array.
i believe it is safe as power_supply.h comprises defines having battery
technology type in 4 characters length which is normally the case and
7 chars length being "UNKNOWN" seldom referred
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge
2012-11-07 18:45 ` Rajanikanth H V
@ 2012-11-10 16:53 ` Francesco Lavra
2012-11-15 11:34 ` Rajanikanth HV
0 siblings, 1 reply; 13+ messages in thread
From: Francesco Lavra @ 2012-11-10 16:53 UTC (permalink / raw)
To: Rajanikanth H V
Cc: rob.herring, lee.jones, arnd, anton.vorontsov, linus.walleij,
linux-arm-kernel, linux-kernel, linaro-dev, patches,
STEricsson_nomadik_linux, rajanikanth.hv
On 11/07/2012 07:45 PM, Rajanikanth H V wrote:
> On Thu, 1 Nov 2012, Francesco Lavra wrote:
> [...]
>>> + btech = of_get_property(np_bat_supply,
>>> + "stericsson,battery-type", NULL);
>>> + if (!btech) {
>>> + dev_warn(dev, "missing property battery-name/type\n");
>>> + strcpy(bat_tech, "UNKNOWN");
>>> + } else {
>>> + strcpy(bat_tech, btech);
>>> + }
>>
>> I don't get the point of declaring the char array and copying the string
>> in it, when you could simply use just the pointer returned by
>> of_get_property().
>
> I am considering a corner case where in 'battery-type' property is not
> present and battery is connected.In this case i promote battery to
> UNKNOWN from null.
You could achieve the same result without using the char array, with
this assignment:
btech = "UNKNOWN";
> FYI: Further, btemp driver will identify the connected battery based on
> resistance value and decide to use.
> Ref: ab8500_btemp_id(...) ab8500_btemp.c
>
>> Anyway, if the string property is longer than 8 characters, you are
>> writing past the size of the destination array.
>
> i believe it is safe as power_supply.h comprises defines having battery
> technology type in 4 characters length which is normally the case and
> 7 chars length being "UNKNOWN" seldom referred
You should be able to handle whatever the device tree contains, and if
it contains unexpected data this is not a good excuse for locking up the
system.
--
Francesco
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge
2012-11-10 16:53 ` Francesco Lavra
@ 2012-11-15 11:34 ` Rajanikanth HV
0 siblings, 0 replies; 13+ messages in thread
From: Rajanikanth HV @ 2012-11-15 11:34 UTC (permalink / raw)
To: Francesco Lavra
Cc: Rajanikanth H V, rob.herring, lee.jones, arnd, anton.vorontsov,
Linus WALLEIJ, linux-arm-kernel, linux-kernel, linaro-dev,
patches, STEricsson_nomadik_linux
On Saturday 10 November 2012 10:23 PM, Francesco Lavra wrote:
>>> I don't get the point of declaring the char array and copying the string
>>> in it, when you could simply use just the pointer returned by
>>> of_get_property().
>>
>> I am considering a corner case where in 'battery-type' property is not
>> present and battery is connected.In this case i promote battery to
>> UNKNOWN from null.
>
> You could achieve the same result without using the char array, with
> this assignment:
>
> btech = "UNKNOWN";
>
>> FYI: Further, btemp driver will identify the connected battery based on
>> resistance value and decide to use.
>> Ref: ab8500_btemp_id(...) ab8500_btemp.c
>>
>>> Anyway, if the string property is longer than 8 characters, you are
>>> writing past the size of the destination array.
>>
>> i believe it is safe as power_supply.h comprises defines having battery
>> technology type in 4 characters length which is normally the case and
>> 7 chars length being "UNKNOWN" seldom referred
>
> You should be able to handle whatever the device tree contains, and if
> it contains unexpected data this is not a good excuse for locking up the
> system.
agreed, if we were to go by what device tree contains then explicit
assignment for battery type as "UNKNOWN" is not required, hence only 2
use case persist as :
a) property name with one of the said value be present
(as per documentation)
b) property name not present
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/4] Implement device tree support for ab8500 BM Devices
2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V
` (3 preceding siblings ...)
2012-10-31 15:40 ` [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg Rajanikanth H.V
@ 2012-11-19 3:46 ` Anton Vorontsov
2012-11-19 3:58 ` Rajanikanth HV
4 siblings, 1 reply; 13+ messages in thread
From: Anton Vorontsov @ 2012-11-19 3:46 UTC (permalink / raw)
To: Rajanikanth H.V
Cc: rob.herring, lee.jones, francescolavra.fl, arnd, linus.walleij,
linux-arm-kernel, linux-kernel, linaro-dev, patches,
STEricsson_nomadik_linux, rajanikanth.hv, Samuel Ortiz
On Wed, Oct 31, 2012 at 03:40:29PM +0000, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
>
> This patch-set adds device tree binding for ab8500 battery-managed
> devices. Removes the redundant platform structure maintained
> across bm devices and implements common DT probe routine across all the
> modules.
Thanks for the patches, Rajanikanth.
The mfd changes seemed very minor, so I impudently applied the patches to
the battery tree. :)
(But I'm bouncing the patches to Samuel and Mark anyway, jfyi.)
p.s.
FWIW, I fixed these warnings.
CHECK drivers/power/ab8500_bmdata.c
drivers/power/ab8500_bmdata.c:146:23: warning: symbol 'temp_to_batres_tbl_thermistor' was not declared. Should it be static?
drivers/power/ab8500_bmdata.c:160:23: warning: symbol 'temp_to_batres_tbl_ext_thermistor' was not declared. Should it be static?
drivers/power/ab8500_bmdata.c:171:23: warning: symbol 'temp_to_batres_tbl_9100' was not declared. Should it be static?
drivers/power/ab8500_bmdata.c:181:28: warning: symbol 'bat_type_thermistor' was not declared. Should it be static?
drivers/power/ab8500_bmdata.c:267:28: warning: symbol 'bat_type_ext_thermistor' was not declared. Should it be static?
Plus fixed a few stylistic issues.
Thanks,
Anton.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/4] Implement device tree support for ab8500 BM Devices
2012-11-19 3:46 ` [PATCH 0/4] Implement device tree support for ab8500 BM Devices Anton Vorontsov
@ 2012-11-19 3:58 ` Rajanikanth HV
2012-11-19 4:57 ` Anton Vorontsov
0 siblings, 1 reply; 13+ messages in thread
From: Rajanikanth HV @ 2012-11-19 3:58 UTC (permalink / raw)
To: Anton Vorontsov
Cc: rob.herring, Lee Jones, Francesco Lavra, Arnd Bergmann,
Linus WALLEIJ, linux-arm-kernel, linux-kernel,
linaro-dev@lists.linaro.org Devel, Patch Tracking,
STEricsson_nomadik_linux, Rajanikanth H.V, Samuel Ortiz
> On 19 November 2012 09:16, Anton Vorontsov <anton.vorontsov@linaro.org> wrote:
> (But I'm bouncing the patches to Samuel and Mark anyway, jfyi.)
>
> p.s.
>
> FWIW, I fixed these warnings.
>
> CHECK drivers/power/ab8500_bmdata.c
> drivers/power/ab8500_bmdata.c:146:23: warning: symbol 'temp_to_batres_tbl_thermistor' was not declared. Should it be static?
> drivers/power/ab8500_bmdata.c:160:23: warning: symbol 'temp_to_batres_tbl_ext_thermistor' was not declared. Should it be static?
> drivers/power/ab8500_bmdata.c:171:23: warning: symbol 'temp_to_batres_tbl_9100' was not declared. Should it be static?
> drivers/power/ab8500_bmdata.c:181:28: warning: symbol 'bat_type_thermistor' was not declared. Should it be static?
> drivers/power/ab8500_bmdata.c:267:28: warning: symbol 'bat_type_ext_thermistor' was not declared. Should it be static?
>
> Plus fixed a few stylistic issues.
thanks anton for validating my patch, you seems to have older version
of patch set,
i am rebasing new version of patch set to 3.7-rc5, will communicate asap.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/4] Implement device tree support for ab8500 BM Devices
2012-11-19 3:58 ` Rajanikanth HV
@ 2012-11-19 4:57 ` Anton Vorontsov
0 siblings, 0 replies; 13+ messages in thread
From: Anton Vorontsov @ 2012-11-19 4:57 UTC (permalink / raw)
To: Rajanikanth HV
Cc: rob.herring, Lee Jones, Francesco Lavra, Arnd Bergmann,
Linus WALLEIJ, linux-arm-kernel, linux-kernel,
linaro-dev@lists.linaro.org Devel, Patch Tracking,
STEricsson_nomadik_linux, Rajanikanth H.V, Samuel Ortiz
On Mon, Nov 19, 2012 at 09:28:59AM +0530, Rajanikanth HV wrote:
> > FWIW, I fixed these warnings.
> >
> > CHECK drivers/power/ab8500_bmdata.c
> > drivers/power/ab8500_bmdata.c:146:23: warning: symbol 'temp_to_batres_tbl_thermistor' was not declared. Should it be static?
> > drivers/power/ab8500_bmdata.c:160:23: warning: symbol 'temp_to_batres_tbl_ext_thermistor' was not declared. Should it be static?
> > drivers/power/ab8500_bmdata.c:171:23: warning: symbol 'temp_to_batres_tbl_9100' was not declared. Should it be static?
> > drivers/power/ab8500_bmdata.c:181:28: warning: symbol 'bat_type_thermistor' was not declared. Should it be static?
> > drivers/power/ab8500_bmdata.c:267:28: warning: symbol 'bat_type_ext_thermistor' was not declared. Should it be static?
> >
> > Plus fixed a few stylistic issues.
>
> thanks anton for validating my patch, you seems to have older version
> of patch set,
> i am rebasing new version of patch set to 3.7-rc5, will communicate asap.
Can you please rebase the new work on top of current battery tree (i.e. on
top of the patches that you've sent)? Or that would be too much burden?
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/4] Implement device tree support for ab8500 BM Devices
@ 2012-11-22 18:43 Rajanikanth H.V
0 siblings, 0 replies; 13+ messages in thread
From: Rajanikanth H.V @ 2012-11-22 18:43 UTC (permalink / raw)
To: rob.herring, robherring2, francescolavra.fl, anton.vorontsov
Cc: lee.jones, arnd, linus.walleij, linux-arm-kernel, linux-kernel,
linaro-dev, patches, STEricsson_nomadik_linux, rajanikanth.hv,
Rajanikanth H.V
From: "Rajanikanth H.V" <rajanikanth.hv@linaro.org>
This patch-set adds device tree binding for ab8500 battery-managed
devices. Removes the redundant platform structure maintained
across bm devices and implements common DT probe routine across all the
modules.
Test status:
a) Tested across 'legacy platform data' and DT binding support
a.1) ab8500_charger driver fails to get regulator in the
legacy platform mode.
b) Interrupt numbers assigned differs between legacy and FDT mode.
(a) Legacy platform_data Mode:
root@ME:/ cat /proc/interrupts
CPU0 CPU1
483: 0 0 ab8500 ab8500-ponkey-dbf
484: 0 0 ab8500 ab8500-ponkey-dbr
485: 0 0 ab8500 BATT_OVV
494: 0 1 ab8500
495: 0 0 ab8500 ab8500-rtc
501: 0 13 ab8500 NCONV_ACCU
503: 7 22 ab8500 CCEOC
504: 0 1 ab8500 CC_INT_CALIB
505: 0 0 ab8500 LOW_BAT_F
516: 0 34 ab8500 ab8500-gpadc
556: 0 0 ab8500 usb-link-status
(b) FDT Mode:
root@ME:/ cat /proc/interrupts
CPU0 CPU1
6: 0 0 ab8500 ab8500-ponkey-dbf
7: 0 0 ab8500 ab8500-ponkey-dbr
8: 0 0 ab8500 BATT_OVV
162: 0 7 ab8500 ab8500-gpadc
163: 0 1 ab8500
164: 0 0 ab8500 ab8500-rtc
484: 0 0 ab8500 usb-link-status
499: 0 4 ab8500 NCONV_ACCU
500: 0 0 ab8500 LOW_BAT_F
502: 0 1 ab8500 CC_INT_CALIB
503: 0 6 ab8500 CCEOC
c) Event handlers across bm-modules have been verified only
during 'battery discharge process' as 'battery charging process'
depends on ab8500-usb code
d) observed nested IRQ issue, log below:
root@ME:/ ------------[ cut here ]------------
WARNING: at /home/rhv00000/linaro_work/linux/kernel/irq/manage.c:635 irq_nested_primary_handler+0x20/0x28()
Primary handler called for nested irq 193
Modules linked in:
[<c0014884>] (unwind_backtrace+0x0/0xf8) from [<c001cbb4>] (warn_slowpath_common+0x4c/0x64)
[<c001cbb4>] (warn_slowpath_common+0x4c/0x64) from [<c001cc60>] (warn_slowpath_fmt+0x30/0x40)
[<c001cc60>] (warn_slowpath_fmt+0x30/0x40) from [<c0060f00>] (irq_nested_primary_handler+0x20/0x28)
[<c0060f00>] (irq_nested_primary_handler+0x20/0x28) from [<c0060b80>] (handle_irq_event_percpu+0x50/0x194)
[<c0060b80>] (handle_irq_event_percpu+0x50/0x194) from [<c0060d00>] (handle_irq_event+0x3c/0x5c)
[<c0060d00>] (handle_irq_event+0x3c/0x5c) from [<c0063034>] (handle_simple_irq+0x8c/0xc4)
[<c0063034>] (handle_simple_irq+0x8c/0xc4) from [<c0062d84>] (resend_irqs+0x40/0x68)
[<c0062d84>] (resend_irqs+0x40/0x68) from [<c00236d8>] (tasklet_action+0x84/0x120)
[<c00236d8>] (tasklet_action+0x84/0x120) from [<c0023ae4>] (__do_softirq+0xd8/0x198)
[<c0023ae4>] (__do_softirq+0xd8/0x198) from [<c0023ed4>] (irq_exit+0x90/0x98)
[<c0023ed4>] (irq_exit+0x90/0x98) from [<c000f2cc>] (handle_IRQ+0x50/0xb0)
[<c000f2cc>] (handle_IRQ+0x50/0xb0) from [<c00084f0>] (gic_handle_irq+0x28/0x5c)
[<c00084f0>] (gic_handle_irq+0x28/0x5c) from [<c000df80>] (__irq_svc+0x40/0x70)
Exception stack(0xebc5dea8 to 0xebc5def0)
dea0: c0f45340 ebc4cf00 00000000 1f321f32 eb196600 ebc4cf00
dec0: c05a3340 00000002 ebc4c600 00000000 eb1b2c00 ebc5df0c 00000000 ebc5def0
dee0: c0040c7c c02ca5ec 60000013 ffffffff
[<c000df80>] (__irq_svc+0x40/0x70) from [<c02ca5ec>] (_raw_spin_unlock_irq+0x28/0x50)
[<c02ca5ec>] (_raw_spin_unlock_irq+0x28/0x50) from [<c0040c7c>] (finish_task_switch+0x28/0xf0)
[<c0040c7c>] (finish_task_switch+0x28/0xf0) from [<c02c93f0>] (__schedule+0x254/0x548)
[<c02c93f0>] (__schedule+0x254/0x548) from [<c0040088>] (smpboot_thread_fn+0x11c/0x250)
[<c0040088>] (smpboot_thread_fn+0x11c/0x250) from [<c0037fc8>] (kthread+0xa4/0xb0)
[<c0037fc8>] (kthread+0xa4/0xb0) from [<c000e418>] (ret_from_fork+0x14/0x3c)
---[ end trace 1b75b31a2719ed1e ]---
Rajanikanth H.V (4):
mfd: ab8500: add devicetree support for fuelgauge
mfd: ab8500: add devicetree support for btemp
mfd: ab8500: add devicetree support for charger
mfd: ab8500: add devicetree support for chargalg
Documentation/devicetree/bindings/mfd/ab8500.txt | 27 +-
.../bindings/power_supply/ab8500/btemp.txt | 16 +
.../bindings/power_supply/ab8500/chargalg.txt | 16 +
.../bindings/power_supply/ab8500/charger.txt | 25 +
.../devicetree/bindings/power_supply/ab8500/fg.txt | 58 +++
arch/arm/boot/dts/dbx5x0.dtsi | 26 +
drivers/mfd/ab8500-core.c | 20 +
drivers/power/Kconfig | 6 -
drivers/power/Makefile | 2 +-
drivers/power/ab8500_bmdata.c | 514 ++++++++++++++++++++
drivers/power/ab8500_btemp.c | 75 +--
drivers/power/ab8500_charger.c | 83 ++--
drivers/power/ab8500_fg.c | 81 +--
drivers/power/abx500_chargalg.c | 57 ++-
include/linux/mfd/abx500.h | 34 +-
15 files changed, 879 insertions(+), 161 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
create mode 100644 drivers/power/ab8500_bmdata.c
--
1.7.10.4
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-11-22 21:13 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V
2012-11-01 15:15 ` Francesco Lavra
2012-11-07 18:45 ` Rajanikanth H V
2012-11-10 16:53 ` Francesco Lavra
2012-11-15 11:34 ` Rajanikanth HV
2012-10-31 15:40 ` [PATCH 2/4] mfd: ab8500: add devicetree support for btemp Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 3/4] mfd: ab8500: add devicetree support for charger Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg Rajanikanth H.V
2012-11-19 3:46 ` [PATCH 0/4] Implement device tree support for ab8500 BM Devices Anton Vorontsov
2012-11-19 3:58 ` Rajanikanth HV
2012-11-19 4:57 ` Anton Vorontsov
2012-11-22 18:43 Rajanikanth H.V
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).