[PATCHv2 0/6] dmaengine: introduce is_slave_xfer helper

[PATCHv2 0/6] dmaengine: introduce is_slave_xfer helper

[Andy Shevchenko]

There is a common practice to distinguish slave type transfers by checking
direction of the channel. This series introduces the check helper and its usage
across the drivers.

Since v1:
 - append commit messages to the all patches
 - update description for the patches against dw_dmac and at_hdmac
 - apply all current Reviewed-by and Acked-by tags

Andy Shevchenko (6):
  dmaengine: introduce is_slave_xfer function
  dma: at_hdmac: check direction properly for cyclic transfers
  dma: dw_dmac: check direction properly in dw_dma_cyclic_prep
  dma: ep93xx_dma: reuse is_slave_xfer helper
  dma: ipu_idmac: reuse is_slave_xfer helper
  dma: ste_dma40: reuse is_slave_xfer helper

 drivers/dma/at_hdmac.c      |   10 +++++-----
 drivers/dma/dw_dmac.c       |    5 +++--
 drivers/dma/ep93xx_dma.c    |    3 +--
 drivers/dma/ipu/ipu_idmac.c |    2 +-
 drivers/dma/ste_dma40.c     |    2 +-
 include/linux/dmaengine.h   |    5 +++++
 6 files changed, 16 insertions(+), 11 deletions(-)

-- 
1.7.10.4

[PATCHv2 1/6] dmaengine: introduce is_slave_xfer function

[Andy Shevchenko]

This function helps to distinguish the slave type of transfer by checking the
direction parameter.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
 include/linux/dmaengine.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 6402b18..3e1a9026 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -618,6 +618,11 @@ static inline int dmaengine_slave_config(struct dma_chan *chan,
 			(unsigned long)config);
 }
 
+static inline bool is_slave_xfer(enum dma_transfer_direction direction)
+{
+	return (direction == DMA_MEM_TO_DEV) || (direction == DMA_DEV_TO_MEM);
+}
+
 static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
 	struct dma_chan *chan, dma_addr_t buf, size_t len,
 	enum dma_transfer_direction dir, unsigned long flags)
-- 
1.7.10.4

[PATCHv2 2/6] dma: at_hdmac: check direction properly for cyclic transfers

[Andy Shevchenko]

dma_transfer_direction is a normal enum. It means we can't usually use the
values as bit fields. Let's adjust this check and move it above the usage of
the direction parameter, due to the nature of the following usage of it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/dma/at_hdmac.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 13a02f4..997ae54 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -778,7 +778,7 @@ err:
  */
 static int
 atc_dma_cyclic_check_values(unsigned int reg_width, dma_addr_t buf_addr,
-		size_t period_len, enum dma_transfer_direction direction)
+		size_t period_len)
 {
 	if (period_len > (ATC_BTSIZE_MAX << reg_width))
 		goto err_out;
@@ -786,8 +786,6 @@ atc_dma_cyclic_check_values(unsigned int reg_width, dma_addr_t buf_addr,
 		goto err_out;
 	if (unlikely(buf_addr & ((1 << reg_width) - 1)))
 		goto err_out;
-	if (unlikely(!(direction & (DMA_DEV_TO_MEM | DMA_MEM_TO_DEV))))
-		goto err_out;
 
 	return 0;
 
@@ -886,14 +884,16 @@ atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		return NULL;
 	}
 
+	if (unlikely(!is_slave_xfer(direction)))
+		goto err_out;
+
 	if (sconfig->direction == DMA_MEM_TO_DEV)
 		reg_width = convert_buswidth(sconfig->dst_addr_width);
 	else
 		reg_width = convert_buswidth(sconfig->src_addr_width);
 
 	/* Check for too big/unaligned periods and unaligned DMA buffer */
-	if (atc_dma_cyclic_check_values(reg_width, buf_addr,
-					period_len, direction))
+	if (atc_dma_cyclic_check_values(reg_width, buf_addr, period_len))
 		goto err_out;
 
 	/* build cyclic linked list */
-- 
1.7.10.4

[PATCHv2 3/6] dma: dw_dmac: check direction properly in dw_dma_cyclic_prep

[Andy Shevchenko]

dma_transfer_direction is a normal enum. It means we can't usually use the
values as bit fields. Let's adjust this check and move it above the usage of
the direction parameter, due to the nature of the following usage of it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/dma/dw_dmac.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index a4a5c80..5e2c4dc 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1336,6 +1336,9 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
 
 	retval = ERR_PTR(-EINVAL);
 
+	if (unlikely(!is_slave_xfer(direction)))
+		goto out_err;
+
 	if (direction == DMA_MEM_TO_DEV)
 		reg_width = __ffs(sconfig->dst_addr_width);
 	else
@@ -1350,8 +1353,6 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
 		goto out_err;
 	if (unlikely(buf_addr & ((1 << reg_width) - 1)))
 		goto out_err;
-	if (unlikely(!(direction & (DMA_MEM_TO_DEV | DMA_DEV_TO_MEM))))
-		goto out_err;
 
 	retval = ERR_PTR(-ENOMEM);
 
-- 
1.7.10.4

[PATCHv2 4/6] dma: ep93xx_dma: reuse is_slave_xfer helper

[Andy Shevchenko]

The is_slave_xfer helps to check if the transfer type is slave.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/dma/ep93xx_dma.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index bcfde40..a2f1d9f 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -903,8 +903,7 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan)
 			switch (data->port) {
 			case EP93XX_DMA_SSP:
 			case EP93XX_DMA_IDE:
-				if (data->direction != DMA_MEM_TO_DEV &&
-				    data->direction != DMA_DEV_TO_MEM)
+				if (!is_slave_xfer(data->direction))
 					return -EINVAL;
 				break;
 			default:
-- 
1.7.10.4

[PATCHv2 5/6] dma: ipu_idmac: reuse is_slave_xfer helper

[Andy Shevchenko]

The is_slave_xfer helps to check if the transfer type is slave.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
 drivers/dma/ipu/ipu_idmac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 6585537..c8d0254 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1347,7 +1347,7 @@ static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan
 	    chan->chan_id != IDMAC_IC_7)
 		return NULL;
 
-	if (direction != DMA_DEV_TO_MEM && direction != DMA_MEM_TO_DEV) {
+	if (!is_slave_xfer(direction)) {
 		dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction);
 		return NULL;
 	}
-- 
1.7.10.4

[PATCHv2 6/6] dma: ste_dma40: reuse is_slave_xfer helper

[Andy Shevchenko]

The is_slave_xfer helps to check if the transfer type is slave.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/dma/ste_dma40.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 23c5573..9f4fdf4 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2337,7 +2337,7 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan,
 							 unsigned long dma_flags,
 							 void *context)
 {
-	if (direction != DMA_DEV_TO_MEM && direction != DMA_MEM_TO_DEV)
+	if (!is_slave_xfer(direction))
 		return NULL;
 
 	return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
-- 
1.7.10.4

Re: [PATCHv2 1/6] dmaengine: introduce is_slave_xfer function

[Linus Walleij]

On Fri, Nov 16, 2012 at 4:52 PM, Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> This function helps to distinguish the slave type of transfer by checking the
> direction parameter.

Looks like a good idea.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCHv2 6/6] dma: ste_dma40: reuse is_slave_xfer helper

[Linus Walleij]

On Fri, Nov 16, 2012 at 4:52 PM, Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> The is_slave_xfer helps to check if the transfer type is slave.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij