[PATCH v2 0/2] ARM: Exynos5250: Enabling samsung usb phy

[PATCH v2 0/2] ARM: Exynos5250: Enabling samsung usb phy

[Vivek Gautam]

Changes from v1:
 - Putting separate device nodes for usb 2.0 phy and usb 3.0 phy
   based on separate driver for samsung usb 3.0 phy and
   samsung usb 2.0 phy:
   [PATCH v3 0/2] Adding USB 3.0 DRD-phy support for exynos5250
   [PATCH v8 0/4] Adding usb2.0 host-phy support for exynos5250
 - Aligning as per the patch:
   usb: phy: samsung: Add support to set pmu isolation
 - Replaced phy-handle approach for PHY CONTROL registers
   to child nodes.
 - Removing AUX data entry from exynos5250 dt file.

Vivek Gautam (2):
  ARM: Exynos5250: Enabling samsung-usbphy driver
  ARM: Exynos5250: Enabling samsung-usb3-phy driver

 arch/arm/boot/dts/exynos5250.dtsi |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)

-- 
1.7.6.5

[PATCH v2 1/2] ARM: Exynos5250: Enabling samsung-usbphy driver

[Vivek Gautam]

Adding usbphy node for Exynos5250 along with the
necessary device data to be parsed.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 30485de..610e338 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -275,6 +275,21 @@
 		#size-cells = <0>;
 	};
 
+	usbphy@12130000 {
+		compatible = "samsung,exynos5250-usbphy";
+		reg = <0x12130000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbphy-sys {
+			      /* USB device and host PHY_CONTROL registers */
+			reg = <0x10040704 0x8>,
+			      /* USB2.0 PHY configuration register */
+			      <0x10050230 0x4>;
+		};
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
1.7.6.5

[PATCH v2 2/2] ARM: Exynos5250: Enabling samsung-usb3-phy driver

[Vivek Gautam]

Adding usb3.0 phy node for Exynos5250 along with the
necessary device data to be parsed.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 610e338..018a70d 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -275,6 +275,19 @@
 		#size-cells = <0>;
 	};
 
+	usbphy@12100000 {
+		compatible = "samsung,exynos5250-usb3-phy";
+		reg = <0x12100000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbphy-sys {
+			      /* USB device and host PHY_CONTROL registers */
+			reg = <0x10040704 0x8>;
+		};
+	};
+
 	usbphy@12130000 {
 		compatible = "samsung,exynos5250-usbphy";
 		reg = <0x12130000 0x100>;
-- 
1.7.6.5

Re: [PATCH v2 0/2] ARM: Exynos5250: Enabling samsung usb phy

[Vivek Gautam]

On Tue, Jan 22, 2013 at 9:01 PM, Vivek Gautam <gautam.vivek@samsung.com> wrote:
> Changes from v1:
>  - Putting separate device nodes for usb 2.0 phy and usb 3.0 phy
>    based on separate driver for samsung usb 3.0 phy and
>    samsung usb 2.0 phy:
>    [PATCH v3 0/2] Adding USB 3.0 DRD-phy support for exynos5250
>    [PATCH v8 0/4] Adding usb2.0 host-phy support for exynos5250
>  - Aligning as per the patch:
>    usb: phy: samsung: Add support to set pmu isolation
>  - Replaced phy-handle approach for PHY CONTROL registers
>    to child nodes.
>  - Removing AUX data entry from exynos5250 dt file.
>
> Vivek Gautam (2):
>   ARM: Exynos5250: Enabling samsung-usbphy driver
>   ARM: Exynos5250: Enabling samsung-usb3-phy driver
>

any comments on this patch-series please ?

>  arch/arm/boot/dts/exynos5250.dtsi |   28 ++++++++++++++++++++++++++++
>  1 files changed, 28 insertions(+), 0 deletions(-)
>
> --
> 1.7.6.5
>



-- 
Thanks & Regards
Vivek

RE: [PATCH v2 1/2] ARM: Exynos5250: Enabling samsung-usbphy driver

[Kukjin Kim]

Vivek Gautam wrote:
> 
> Adding usbphy node for Exynos5250 along with the
> necessary device data to be parsed.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
>  1 files changed, 15 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index 30485de..610e338 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -275,6 +275,21 @@
>  		#size-cells = <0>;
>  	};
> 
> +	usbphy@12130000 {

Please put above node by order of address.

> +		compatible = "samsung,exynos5250-usbphy";
> +		reg = <0x12130000 0x100>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		usbphy-sys {
> +			      /* USB device and host PHY_CONTROL registers
*/

Please add the binding documentation instead of comment here.

> +			reg = <0x10040704 0x8>,
> +			      /* USB2.0 PHY configuration register */
> +			      <0x10050230 0x4>;
> +		};
> +	};
> +
>  	amba {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> --
> 1.7.6.5

RE: [PATCH v2 2/2] ARM: Exynos5250: Enabling samsung-usb3-phy driver

[Kukjin Kim]

Vivek Gautam wrote:
> 
> Adding usb3.0 phy node for Exynos5250 along with the
> necessary device data to be parsed.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250.dtsi |   13 +++++++++++++
>  1 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index 610e338..018a70d 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -275,6 +275,19 @@
>  		#size-cells = <0>;
>  	};
> 
> +	usbphy@12100000 {
> +		compatible = "samsung,exynos5250-usb3-phy";
> +		reg = <0x12100000 0x100>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		usbphy-sys {
> +			      /* USB device and host PHY_CONTROL registers
*/
> +			reg = <0x10040704 0x8>;
> +		};
> +	};
> +
>  	usbphy@12130000 {
>  		compatible = "samsung,exynos5250-usbphy";
>  		reg = <0x12130000 0x100>;
> --
> 1.7.6.5

Same as previous comments.

Thanks.

- Kukjin

Re: [PATCH v2 1/2] ARM: Exynos5250: Enabling samsung-usbphy driver

[Vivek Gautam]

Hi Kukjin,


On Wed, Jan 30, 2013 at 10:36 AM, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Vivek Gautam wrote:
>>
>> Adding usbphy node for Exynos5250 along with the
>> necessary device data to be parsed.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
>>  1 files changed, 15 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>> b/arch/arm/boot/dts/exynos5250.dtsi
>> index 30485de..610e338 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -275,6 +275,21 @@
>>               #size-cells = <0>;
>>       };
>>
>> +     usbphy@12130000 {
>
> Please put above node by order of address.
>

Sure will do that. Actually thought the listing was as per IPs.

>> +             compatible = "samsung,exynos5250-usbphy";
>> +             reg = <0x12130000 0x100>;
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges;
>> +
>> +             usbphy-sys {
>> +                           /* USB device and host PHY_CONTROL registers
> */
>
> Please add the binding documentation instead of comment here.
>

Bindings documentation already added at
"Documentation/devicetree/bindings/usb/samsung-usbphy.txt"
merged in 'usb-next'.

>> +                     reg = <0x10040704 0x8>,
>> +                           /* USB2.0 PHY configuration register */
>> +                           <0x10050230 0x4>;
>> +             };
>> +     };
>> +
>>       amba {
>>               #address-cells = <1>;
>>               #size-cells = <1>;
>> --
>> 1.7.6.5
>




-- 
Thanks & Regards
Vivek