* [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable
@ 2013-01-27 4:07 Mark Brown
2013-01-27 4:07 ` [PATCH 02/10] mfd: wm5102: Mark only extant DSP registers volatile Mark Brown
` (9 more replies)
0 siblings, 10 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
We can cache some of them but this is simpler for now.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 088872a..4a01192 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -1825,7 +1825,13 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_3:
return true;
default:
- return false;
+ if ((reg >= 0x100000 && reg < 0x106000) ||
+ (reg >= 0x180000 && reg < 0x180800) ||
+ (reg >= 0x190000 && reg < 0x194800) ||
+ (reg >= 0x1a8000 && reg < 0x1a9800))
+ return true;
+ else
+ return false;
}
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 02/10] mfd: wm5102: Mark only extant DSP registers volatile
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-01-27 4:07 ` [PATCH 03/10] mfd: arizona: Register MICVDD supply first to ensure no retries Mark Brown
` (8 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
Since regmap sometimes uses volatile as a proxy for readable simply
having a blanket condition can mark too many registers as readable.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 4a01192..0317d11 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -1837,9 +1837,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
{
- if (reg > 0xffff)
- return true;
-
switch (reg) {
case ARIZONA_SOFTWARE_RESET:
case ARIZONA_DEVICE_REVISION:
@@ -1884,7 +1881,13 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_DETECT_3:
return true;
default:
- return false;
+ if ((reg >= 0x100000 && reg < 0x106000) ||
+ (reg >= 0x180000 && reg < 0x180800) ||
+ (reg >= 0x190000 && reg < 0x194800) ||
+ (reg >= 0x1a8000 && reg < 0x1a9800))
+ return true;
+ else
+ return false;
}
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 03/10] mfd: arizona: Register MICVDD supply first to ensure no retries
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
2013-01-27 4:07 ` [PATCH 02/10] mfd: wm5102: Mark only extant DSP registers volatile Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-01-27 4:07 ` [PATCH 04/10] mfd: arizona: Disable control interface reporting for WM5102 and WM5110 Mark Brown
` (7 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
Not strictly required as probe deferral will take care of everything but
it makes boot a little smoother.
Reported-by: Ryo Tsutsui <Ryo.Tsutsui@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index bc8a3ed..a8b8a7b 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -270,19 +270,19 @@ static struct mfd_cell early_devs[] = {
};
static struct mfd_cell wm5102_devs[] = {
+ { .name = "arizona-micsupp" },
{ .name = "arizona-extcon" },
{ .name = "arizona-gpio" },
{ .name = "arizona-haptics" },
- { .name = "arizona-micsupp" },
{ .name = "arizona-pwm" },
{ .name = "wm5102-codec" },
};
static struct mfd_cell wm5110_devs[] = {
+ { .name = "arizona-micsupp" },
{ .name = "arizona-extcon" },
{ .name = "arizona-gpio" },
{ .name = "arizona-haptics" },
- { .name = "arizona-micsupp" },
{ .name = "arizona-pwm" },
{ .name = "wm5110-codec" },
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 04/10] mfd: arizona: Disable control interface reporting for WM5102 and WM5110
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
2013-01-27 4:07 ` [PATCH 02/10] mfd: wm5102: Mark only extant DSP registers volatile Mark Brown
2013-01-27 4:07 ` [PATCH 03/10] mfd: arizona: Register MICVDD supply first to ensure no retries Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-01-27 4:07 ` [PATCH 05/10] mfd: arizona: Check errors from regcache_sync() Mark Brown
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
Rather than disabling the error reporting only for earlier revisions
unconditionally disable it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-irq.c | 18 ++----------------
1 file changed, 2 insertions(+), 16 deletions(-)
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 74713bf..2bec5f0 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -176,14 +176,7 @@ int arizona_irq_init(struct arizona *arizona)
aod = &wm5102_aod;
irq = &wm5102_irq;
- switch (arizona->rev) {
- case 0:
- case 1:
- ctrlif_error = false;
- break;
- default:
- break;
- }
+ ctrlif_error = false;
break;
#endif
#ifdef CONFIG_MFD_WM5110
@@ -191,14 +184,7 @@ int arizona_irq_init(struct arizona *arizona)
aod = &wm5110_aod;
irq = &wm5110_irq;
- switch (arizona->rev) {
- case 0:
- case 1:
- ctrlif_error = false;
- break;
- default:
- break;
- }
+ ctrlif_error = false;
break;
#endif
default:
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 05/10] mfd: arizona: Check errors from regcache_sync()
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (2 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 04/10] mfd: arizona: Disable control interface reporting for WM5102 and WM5110 Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-01-27 4:07 ` [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels Mark Brown
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
If the control bus is unrelabile we may hit errors during regcache_sync(),
especially given that it tends to be one the most dense bursts of I/O in
many systems.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index a8b8a7b..1ab02a7 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -239,7 +239,12 @@ static int arizona_runtime_resume(struct device *dev)
return ret;
}
- regcache_sync(arizona->regmap);
+ ret = regcache_sync(arizona->regmap);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to restore register cache\n");
+ regulator_disable(arizona->dcvdd);
+ return ret;
+ }
return 0;
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (3 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 05/10] mfd: arizona: Check errors from regcache_sync() Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-01-27 9:44 ` Mark Brown
2013-01-27 4:07 ` [PATCH 07/10] mfd: wm5102: Add registers for microphone detection level configuration Mark Brown
` (4 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
The microphone detection levels for Arizona parts can be customised.
Allow this to be done via platform data, the values chosen will depend
on the system design and determined in discussion with Wolfson.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 8 ++++++++
include/linux/mfd/arizona/pdata.h | 5 +++++
include/linux/mfd/arizona/registers.h | 4 ++++
3 files changed, 17 insertions(+)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 1ab02a7..5f0de90 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -458,6 +458,14 @@ int arizona_dev_init(struct arizona *arizona)
arizona->pdata.gpio_defaults[i]);
}
+ for (i = 0; i < ARRAY_SIZE(arizona->pdata.micd_level); i++) {
+ if (!arizona->pdata.micd_level[i])
+ continue;
+
+ regmap_write(arizona->regmap, ARIZONA_MIC_DETECT_LEVEL_1 + i,
+ arizona->pdata.micd_level[i]);
+ }
+
pm_runtime_set_autosuspend_delay(arizona->dev, 100);
pm_runtime_use_autosuspend(arizona->dev);
pm_runtime_enable(arizona->dev);
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 8b1d1da..73822bd 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -67,6 +67,8 @@
#define ARIZONA_MAX_PDM_SPK 2
+#define ARIZONA_NUM_MICD_LEVEL 4
+
struct regulator_init_data;
struct arizona_micd_config {
@@ -99,6 +101,9 @@ struct arizona_pdata {
/** GPIO for mic detection polarity */
int micd_pol_gpio;
+ /** Mic detect level parameters */
+ int micd_level[ARIZONA_NUM_MICD_LEVEL];
+
/** Headset polarity configurations */
struct arizona_micd_config *micd_configs;
int num_micd_configs;
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 1f6fe31..fb3a1b8 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -122,6 +122,10 @@
#define ARIZONA_MIC_DETECT_1 0x2A3
#define ARIZONA_MIC_DETECT_2 0x2A4
#define ARIZONA_MIC_DETECT_3 0x2A5
+#define ARIZONA_MIC_DETECT_LEVEL_1 0x2A6
+#define ARIZONA_MIC_DETECT_LEVEL_2 0x2A7
+#define ARIZONA_MIC_DETECT_LEVEL_3 0x2A8
+#define ARIZONA_MIC_DETECT_LEVEL_4 0x2A9
#define ARIZONA_MIC_NOISE_MIX_CONTROL_1 0x2C3
#define ARIZONA_ISOLATION_CONTROL 0x2CB
#define ARIZONA_JACK_DETECT_ANALOGUE 0x2D3
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 07/10] mfd: wm5102: Add registers for microphone detection level configuration
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (4 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-02-03 17:00 ` Samuel Ortiz
2013-01-27 4:07 ` [PATCH 08/10] mfd: wm5102: Refresh register defaults Mark Brown
` (3 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 0317d11..167e6c4 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -315,6 +315,10 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
{ 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */
{ 0x000002A5, 0x0000 }, /* R677 - Mic Detect 3 */
+ { 0x000002A6, 0x3737 }, /* R678 - Mic Detect Level 1 */
+ { 0x000002A7, 0x372C }, /* R679 - Mic Detect Level 2 */
+ { 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */
+ { 0x000002A9, 0x300A }, /* R681 - Mic Detect Level 4 */
{ 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */
{ 0x000002CB, 0x0000 }, /* R715 - Isolation control */
{ 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */
@@ -1109,6 +1113,10 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_DETECT_1:
case ARIZONA_MIC_DETECT_2:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_MIC_DETECT_LEVEL_1:
+ case ARIZONA_MIC_DETECT_LEVEL_2:
+ case ARIZONA_MIC_DETECT_LEVEL_3:
+ case ARIZONA_MIC_DETECT_LEVEL_4:
case ARIZONA_MIC_NOISE_MIX_CONTROL_1:
case ARIZONA_ISOLATION_CONTROL:
case ARIZONA_JACK_DETECT_ANALOGUE:
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 08/10] mfd: wm5102: Refresh register defaults
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (5 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 07/10] mfd: wm5102: Add registers for microphone detection level configuration Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-02-03 17:00 ` Samuel Ortiz
2013-01-27 4:07 ` [PATCH 09/10] mfd: wm5102: Update rev B patch for latest evaluation Mark Brown
` (2 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
The WM5102 register defaults are not up to date with the current register
map, synchronise them with those for current devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 95 +++++++++++++++----------------------------
1 file changed, 33 insertions(+), 62 deletions(-)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 167e6c4..edee1da 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -224,11 +224,9 @@ const struct regmap_irq_chip wm5102_irq = {
static const struct reg_default wm5102_reg_default[] = {
{ 0x00000008, 0x0019 }, /* R8 - Ctrl IF SPI CFG 1 */
{ 0x00000009, 0x0001 }, /* R9 - Ctrl IF I2C1 CFG 1 */
- { 0x0000000D, 0x0000 }, /* R13 - Ctrl IF Status 1 */
{ 0x00000016, 0x0000 }, /* R22 - Write Sequencer Ctrl 0 */
{ 0x00000017, 0x0000 }, /* R23 - Write Sequencer Ctrl 1 */
{ 0x00000018, 0x0000 }, /* R24 - Write Sequencer Ctrl 2 */
- { 0x0000001A, 0x0000 }, /* R26 - Write Sequencer PROM */
{ 0x00000020, 0x0000 }, /* R32 - Tone Generator 1 */
{ 0x00000021, 0x1000 }, /* R33 - Tone Generator 2 */
{ 0x00000022, 0x0000 }, /* R34 - Tone Generator 3 */
@@ -243,12 +241,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */
{ 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */
{ 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */
- { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */
- { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */
- { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */
- { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */
- { 0x0000006C, 0x01FF }, /* R108 - Always On Triggers Sequence Select 5 */
- { 0x0000006D, 0x01FF }, /* R109 - Always On Triggers Sequence Select 6 */
+ { 0x00000066, 0x01FF }, /* R102 - Always On Triggers Sequence Select 1 */
+ { 0x00000067, 0x01FF }, /* R103 - Always On Triggers Sequence Select 2 */
+ { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */
+ { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
+ { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
+ { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
+ { 0x0000006E, 0x01FF }, /* R110 - Trigger Sequence Select 32 */
+ { 0x0000006F, 0x01FF }, /* R111 - Trigger Sequence Select 33 */
{ 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
@@ -258,13 +258,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000095, 0x0000 }, /* R149 - Haptics phase 2 duration */
{ 0x00000096, 0x0000 }, /* R150 - Haptics phase 3 intensity */
{ 0x00000097, 0x0000 }, /* R151 - Haptics phase 3 duration */
- { 0x00000100, 0x0001 }, /* R256 - Clock 32k 1 */
+ { 0x00000100, 0x0002 }, /* R256 - Clock 32k 1 */
{ 0x00000101, 0x0304 }, /* R257 - System Clock 1 */
{ 0x00000102, 0x0011 }, /* R258 - Sample rate 1 */
{ 0x00000103, 0x0011 }, /* R259 - Sample rate 2 */
{ 0x00000104, 0x0011 }, /* R260 - Sample rate 3 */
{ 0x00000112, 0x0305 }, /* R274 - Async clock 1 */
{ 0x00000113, 0x0011 }, /* R275 - Async sample rate 1 */
+ { 0x00000114, 0x0011 }, /* R276 - Async sample rate 2 */
{ 0x00000149, 0x0000 }, /* R329 - Output system clock */
{ 0x0000014A, 0x0000 }, /* R330 - Output async clock */
{ 0x00000152, 0x0000 }, /* R338 - Rate Estimator 1 */
@@ -273,13 +274,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */
{ 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */
{ 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */
- { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */
+ { 0x00000171, 0x0002 }, /* R369 - FLL1 Control 1 */
{ 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */
{ 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */
{ 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
{ 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */
{ 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
{ 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */
+ { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */
{ 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
{ 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
{ 0x00000183, 0x0000 }, /* R387 - FLL1 Synchroniser 3 */
@@ -295,6 +297,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */
{ 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
{ 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
+ { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */
{ 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
{ 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
{ 0x000001A3, 0x0000 }, /* R419 - FLL2 Synchroniser 3 */
@@ -310,8 +313,13 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
+ { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */
+ { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
+ { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
+ { 0x0000029F, 0x0000 }, /* R671 - Headphone Detect Test */
+ { 0x000002A2, 0x0000 }, /* R674 - Micd Clamp control */
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
{ 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */
{ 0x000002A5, 0x0000 }, /* R677 - Mic Detect 3 */
@@ -346,53 +354,44 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000400, 0x0000 }, /* R1024 - Output Enables 1 */
{ 0x00000408, 0x0000 }, /* R1032 - Output Rate 1 */
{ 0x00000409, 0x0022 }, /* R1033 - Output Volume Ramp */
- { 0x00000410, 0x0080 }, /* R1040 - Output Path Config 1L */
+ { 0x00000410, 0x4080 }, /* R1040 - Output Path Config 1L */
{ 0x00000411, 0x0180 }, /* R1041 - DAC Digital Volume 1L */
- { 0x00000412, 0x0080 }, /* R1042 - DAC Volume Limit 1L */
+ { 0x00000412, 0x0081 }, /* R1042 - DAC Volume Limit 1L */
{ 0x00000413, 0x0001 }, /* R1043 - Noise Gate Select 1L */
{ 0x00000414, 0x0080 }, /* R1044 - Output Path Config 1R */
{ 0x00000415, 0x0180 }, /* R1045 - DAC Digital Volume 1R */
- { 0x00000416, 0x0080 }, /* R1046 - DAC Volume Limit 1R */
+ { 0x00000416, 0x0081 }, /* R1046 - DAC Volume Limit 1R */
{ 0x00000417, 0x0002 }, /* R1047 - Noise Gate Select 1R */
- { 0x00000418, 0x0080 }, /* R1048 - Output Path Config 2L */
+ { 0x00000418, 0x4080 }, /* R1048 - Output Path Config 2L */
{ 0x00000419, 0x0180 }, /* R1049 - DAC Digital Volume 2L */
- { 0x0000041A, 0x0080 }, /* R1050 - DAC Volume Limit 2L */
+ { 0x0000041A, 0x0081 }, /* R1050 - DAC Volume Limit 2L */
{ 0x0000041B, 0x0004 }, /* R1051 - Noise Gate Select 2L */
{ 0x0000041C, 0x0080 }, /* R1052 - Output Path Config 2R */
{ 0x0000041D, 0x0180 }, /* R1053 - DAC Digital Volume 2R */
- { 0x0000041E, 0x0080 }, /* R1054 - DAC Volume Limit 2R */
+ { 0x0000041E, 0x0081 }, /* R1054 - DAC Volume Limit 2R */
{ 0x0000041F, 0x0008 }, /* R1055 - Noise Gate Select 2R */
- { 0x00000420, 0x0080 }, /* R1056 - Output Path Config 3L */
+ { 0x00000420, 0x4080 }, /* R1056 - Output Path Config 3L */
{ 0x00000421, 0x0180 }, /* R1057 - DAC Digital Volume 3L */
- { 0x00000422, 0x0080 }, /* R1058 - DAC Volume Limit 3L */
+ { 0x00000422, 0x0081 }, /* R1058 - DAC Volume Limit 3L */
{ 0x00000423, 0x0010 }, /* R1059 - Noise Gate Select 3L */
- { 0x00000424, 0x0080 }, /* R1060 - Output Path Config 3R */
- { 0x00000425, 0x0180 }, /* R1061 - DAC Digital Volume 3R */
- { 0x00000426, 0x0080 }, /* R1062 - DAC Volume Limit 3R */
- { 0x00000428, 0x0000 }, /* R1064 - Output Path Config 4L */
+ { 0x00000428, 0xC000 }, /* R1064 - Output Path Config 4L */
{ 0x00000429, 0x0180 }, /* R1065 - DAC Digital Volume 4L */
- { 0x0000042A, 0x0080 }, /* R1066 - Out Volume 4L */
+ { 0x0000042A, 0x0081 }, /* R1066 - Out Volume 4L */
{ 0x0000042B, 0x0040 }, /* R1067 - Noise Gate Select 4L */
- { 0x0000042C, 0x0000 }, /* R1068 - Output Path Config 4R */
{ 0x0000042D, 0x0180 }, /* R1069 - DAC Digital Volume 4R */
- { 0x0000042E, 0x0080 }, /* R1070 - Out Volume 4R */
+ { 0x0000042E, 0x0081 }, /* R1070 - Out Volume 4R */
{ 0x0000042F, 0x0080 }, /* R1071 - Noise Gate Select 4R */
{ 0x00000430, 0x0000 }, /* R1072 - Output Path Config 5L */
{ 0x00000431, 0x0180 }, /* R1073 - DAC Digital Volume 5L */
- { 0x00000432, 0x0080 }, /* R1074 - DAC Volume Limit 5L */
+ { 0x00000432, 0x0081 }, /* R1074 - DAC Volume Limit 5L */
{ 0x00000433, 0x0100 }, /* R1075 - Noise Gate Select 5L */
- { 0x00000434, 0x0000 }, /* R1076 - Output Path Config 5R */
{ 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */
- { 0x00000436, 0x0080 }, /* R1078 - DAC Volume Limit 5R */
- { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */
+ { 0x00000436, 0x0081 }, /* R1078 - DAC Volume Limit 5R */
+ { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */
{ 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */
{ 0x00000458, 0x0001 }, /* R1112 - Noise Gate Control */
{ 0x00000490, 0x0069 }, /* R1168 - PDM SPK1 CTRL 1 */
{ 0x00000491, 0x0000 }, /* R1169 - PDM SPK1 CTRL 2 */
- { 0x000004DC, 0x0000 }, /* R1244 - DAC comp 1 */
- { 0x000004DD, 0x0000 }, /* R1245 - DAC comp 2 */
- { 0x000004DE, 0x0000 }, /* R1246 - DAC comp 3 */
- { 0x000004DF, 0x0000 }, /* R1247 - DAC comp 4 */
{ 0x00000500, 0x000C }, /* R1280 - AIF1 BCLK Ctrl */
{ 0x00000501, 0x0008 }, /* R1281 - AIF1 Tx Pin Ctrl */
{ 0x00000502, 0x0000 }, /* R1282 - AIF1 Rx Pin Ctrl */
@@ -420,7 +419,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000518, 0x0007 }, /* R1304 - AIF1 Frame Ctrl 18 */
{ 0x00000519, 0x0000 }, /* R1305 - AIF1 Tx Enables */
{ 0x0000051A, 0x0000 }, /* R1306 - AIF1 Rx Enables */
- { 0x0000051B, 0x0000 }, /* R1307 - AIF1 Force Write */
{ 0x00000540, 0x000C }, /* R1344 - AIF2 BCLK Ctrl */
{ 0x00000541, 0x0008 }, /* R1345 - AIF2 Tx Pin Ctrl */
{ 0x00000542, 0x0000 }, /* R1346 - AIF2 Rx Pin Ctrl */
@@ -436,7 +434,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */
{ 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */
{ 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */
- { 0x0000055B, 0x0000 }, /* R1371 - AIF2 Force Write */
{ 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */
{ 0x00000581, 0x0008 }, /* R1409 - AIF3 Tx Pin Ctrl */
{ 0x00000582, 0x0000 }, /* R1410 - AIF3 Rx Pin Ctrl */
@@ -452,7 +449,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000592, 0x0001 }, /* R1426 - AIF3 Frame Ctrl 12 */
{ 0x00000599, 0x0000 }, /* R1433 - AIF3 Tx Enables */
{ 0x0000059A, 0x0000 }, /* R1434 - AIF3 Rx Enables */
- { 0x0000059B, 0x0000 }, /* R1435 - AIF3 Force Write */
{ 0x000005E3, 0x0004 }, /* R1507 - SLIMbus Framer Ref Gear */
{ 0x000005E5, 0x0000 }, /* R1509 - SLIMbus Rates 1 */
{ 0x000005E6, 0x0000 }, /* R1510 - SLIMbus Rates 2 */
@@ -776,22 +772,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x000008CD, 0x0080 }, /* R2253 - DRC1RMIX Input 3 Volume */
{ 0x000008CE, 0x0000 }, /* R2254 - DRC1RMIX Input 4 Source */
{ 0x000008CF, 0x0080 }, /* R2255 - DRC1RMIX Input 4 Volume */
- { 0x000008D0, 0x0000 }, /* R2256 - DRC2LMIX Input 1 Source */
- { 0x000008D1, 0x0080 }, /* R2257 - DRC2LMIX Input 1 Volume */
- { 0x000008D2, 0x0000 }, /* R2258 - DRC2LMIX Input 2 Source */
- { 0x000008D3, 0x0080 }, /* R2259 - DRC2LMIX Input 2 Volume */
- { 0x000008D4, 0x0000 }, /* R2260 - DRC2LMIX Input 3 Source */
- { 0x000008D5, 0x0080 }, /* R2261 - DRC2LMIX Input 3 Volume */
- { 0x000008D6, 0x0000 }, /* R2262 - DRC2LMIX Input 4 Source */
- { 0x000008D7, 0x0080 }, /* R2263 - DRC2LMIX Input 4 Volume */
- { 0x000008D8, 0x0000 }, /* R2264 - DRC2RMIX Input 1 Source */
- { 0x000008D9, 0x0080 }, /* R2265 - DRC2RMIX Input 1 Volume */
- { 0x000008DA, 0x0000 }, /* R2266 - DRC2RMIX Input 2 Source */
- { 0x000008DB, 0x0080 }, /* R2267 - DRC2RMIX Input 2 Volume */
- { 0x000008DC, 0x0000 }, /* R2268 - DRC2RMIX Input 3 Source */
- { 0x000008DD, 0x0080 }, /* R2269 - DRC2RMIX Input 3 Volume */
- { 0x000008DE, 0x0000 }, /* R2270 - DRC2RMIX Input 4 Source */
- { 0x000008DF, 0x0080 }, /* R2271 - DRC2RMIX Input 4 Volume */
{ 0x00000900, 0x0000 }, /* R2304 - HPLP1MIX Input 1 Source */
{ 0x00000901, 0x0080 }, /* R2305 - HPLP1MIX Input 1 Volume */
{ 0x00000902, 0x0000 }, /* R2306 - HPLP1MIX Input 2 Source */
@@ -883,7 +863,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000D1B, 0xFFFF }, /* R3355 - IRQ2 Status 4 Mask */
{ 0x00000D1C, 0xFFFF }, /* R3356 - IRQ2 Status 5 Mask */
{ 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */
- { 0x00000D41, 0x0000 }, /* R3393 - ADSP2 IRQ0 */
+ { 0x00000D50, 0x0000 }, /* R3408 - AOD wkup and trig */
{ 0x00000D53, 0xFFFF }, /* R3411 - AOD IRQ Mask IRQ1 */
{ 0x00000D54, 0xFFFF }, /* R3412 - AOD IRQ Mask IRQ2 */
{ 0x00000D56, 0x0000 }, /* R3414 - Jack detect debounce */
@@ -978,11 +958,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000E82, 0x0018 }, /* R3714 - DRC1 ctrl3 */
{ 0x00000E83, 0x0000 }, /* R3715 - DRC1 ctrl4 */
{ 0x00000E84, 0x0000 }, /* R3716 - DRC1 ctrl5 */
- { 0x00000E89, 0x0018 }, /* R3721 - DRC2 ctrl1 */
- { 0x00000E8A, 0x0933 }, /* R3722 - DRC2 ctrl2 */
- { 0x00000E8B, 0x0018 }, /* R3723 - DRC2 ctrl3 */
- { 0x00000E8C, 0x0000 }, /* R3724 - DRC2 ctrl4 */
- { 0x00000E8D, 0x0000 }, /* R3725 - DRC2 ctrl5 */
{ 0x00000EC0, 0x0000 }, /* R3776 - HPLPF1_1 */
{ 0x00000EC1, 0x0000 }, /* R3777 - HPLPF1_2 */
{ 0x00000EC4, 0x0000 }, /* R3780 - HPLPF2_1 */
@@ -993,16 +968,12 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */
{ 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */
{ 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */
- { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */
{ 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */
{ 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */
{ 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */
{ 0x00000EF3, 0x0000 }, /* R3827 - ISRC 2 CTRL 1 */
{ 0x00000EF4, 0x0000 }, /* R3828 - ISRC 2 CTRL 2 */
{ 0x00000EF5, 0x0000 }, /* R3829 - ISRC 2 CTRL 3 */
- { 0x00000EF6, 0x0000 }, /* R3830 - ISRC 3 CTRL 1 */
- { 0x00000EF7, 0x0000 }, /* R3831 - ISRC 3 CTRL 2 */
- { 0x00000EF8, 0x0000 }, /* R3832 - ISRC 3 CTRL 3 */
{ 0x00001100, 0x0010 }, /* R4352 - DSP1 Control 1 */
{ 0x00001101, 0x0000 }, /* R4353 - DSP1 Clocking 1 */
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 09/10] mfd: wm5102: Update rev B patch for latest evaluation
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (6 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 08/10] mfd: wm5102: Refresh register defaults Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-01-27 4:07 ` [PATCH 10/10] mfd: arizona: Disable interrupts during resume Mark Brown
2013-02-03 17:00 ` [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Samuel Ortiz
9 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
The latest evaluation of the revision B silicon suggests some changes to
the tuning applied for optimal performance.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index edee1da..a687901 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -59,12 +59,14 @@ static const struct reg_default wm5102_reva_patch[] = {
static const struct reg_default wm5102_revb_patch[] = {
{ 0x80, 0x0003 },
{ 0x081, 0xE022 },
- { 0x410, 0x6080 },
- { 0x418, 0x6080 },
- { 0x420, 0x6080 },
+ { 0x410, 0x4080 },
+ { 0x418, 0x4080 },
+ { 0x420, 0x4080 },
{ 0x428, 0xC000 },
- { 0x441, 0x8014 },
+ { 0x4B0, 0x0066 },
{ 0x458, 0x000b },
+ { 0x212, 0x0000 },
+ { 0x171, 0x0000 },
{ 0x80, 0x0000 },
};
@@ -274,7 +276,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */
{ 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */
{ 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */
- { 0x00000171, 0x0002 }, /* R369 - FLL1 Control 1 */
+ { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */
{ 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */
{ 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */
{ 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 10/10] mfd: arizona: Disable interrupts during resume
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (7 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 09/10] mfd: wm5102: Update rev B patch for latest evaluation Mark Brown
@ 2013-01-27 4:07 ` Mark Brown
2013-02-03 17:00 ` [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Samuel Ortiz
9 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-01-27 4:07 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches, Mark Brown
Runtime power management does not function during system suspend but the
Arizona devices need to use runtime power management to power up the device
in order to handle interrupts. Try to avoid interrupts firing during
resume by disabling the primary IRQ before interrupts are reenabled on
resume and only reenabling it again during main resume.
The goal is to avoid issues in the situation where an interrupt is asserted
during resume (eg, due to it being the wake source) and the interrupt
handling gets scheduled prior to the device being able to handle runtime
PM.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 5f0de90..0bb79c8 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -263,10 +263,36 @@ static int arizona_runtime_suspend(struct device *dev)
}
#endif
+#ifdef CONFIG_PM_SLEEP
+static int arizona_resume_noirq(struct device *dev)
+{
+ struct arizona *arizona = dev_get_drvdata(dev);
+
+ dev_dbg(arizona->dev, "Early resume, disabling IRQ\n");
+ disable_irq(arizona->irq);
+
+ return 0;
+}
+
+static int arizona_resume(struct device *dev)
+{
+ struct arizona *arizona = dev_get_drvdata(dev);
+
+ dev_dbg(arizona->dev, "Late resume, reenabling IRQ\n");
+ enable_irq(arizona->irq);
+
+ return 0;
+}
+#endif
+
const struct dev_pm_ops arizona_pm_ops = {
SET_RUNTIME_PM_OPS(arizona_runtime_suspend,
arizona_runtime_resume,
NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, arizona_resume)
+#ifdef CONFIG_PM_SLEEP
+ .resume_noirq = arizona_resume_noirq,
+#endif
};
EXPORT_SYMBOL_GPL(arizona_pm_ops);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels
2013-01-27 4:07 ` [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels Mark Brown
@ 2013-01-27 9:44 ` Mark Brown
2013-01-27 23:56 ` Samuel Ortiz
0 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-01-27 9:44 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, patches
[-- Attachment #1: Type: text/plain, Size: 486 bytes --]
On Sun, Jan 27, 2013 at 12:07:28PM +0800, Mark Brown wrote:
> The microphone detection levels for Arizona parts can be customised.
> Allow this to be done via platform data, the values chosen will depend
> on the system design and determined in discussion with Wolfson.
Hrm, actually - since this isn't applied and I have a more flexible
version to follow shortly (integrated into extcon rather than MFD) can
you please not apply this? I had forgotten it was still waiting for
merge.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels
2013-01-27 9:44 ` Mark Brown
@ 2013-01-27 23:56 ` Samuel Ortiz
0 siblings, 0 replies; 15+ messages in thread
From: Samuel Ortiz @ 2013-01-27 23:56 UTC (permalink / raw)
To: Mark Brown; +Cc: linux-kernel, patches
Hi Mark,
On Sun, Jan 27, 2013 at 05:44:34PM +0800, Mark Brown wrote:
> On Sun, Jan 27, 2013 at 12:07:28PM +0800, Mark Brown wrote:
> > The microphone detection levels for Arizona parts can be customised.
> > Allow this to be done via platform data, the values chosen will depend
> > on the system design and determined in discussion with Wolfson.
>
> Hrm, actually - since this isn't applied and I have a more flexible
> version to follow shortly (integrated into extcon rather than MFD) can
> you please not apply this?
Sure, I'll skip it when I'll start my for-next patch merge (this week).
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
` (8 preceding siblings ...)
2013-01-27 4:07 ` [PATCH 10/10] mfd: arizona: Disable interrupts during resume Mark Brown
@ 2013-02-03 17:00 ` Samuel Ortiz
9 siblings, 0 replies; 15+ messages in thread
From: Samuel Ortiz @ 2013-02-03 17:00 UTC (permalink / raw)
To: Mark Brown; +Cc: linux-kernel, patches
Hi Mark,
On Sun, Jan 27, 2013 at 12:07:23PM +0800, Mark Brown wrote:
> We can cache some of them but this is simpler for now.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/wm5102-tables.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
Applied, thanks.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 08/10] mfd: wm5102: Refresh register defaults
2013-01-27 4:07 ` [PATCH 08/10] mfd: wm5102: Refresh register defaults Mark Brown
@ 2013-02-03 17:00 ` Samuel Ortiz
0 siblings, 0 replies; 15+ messages in thread
From: Samuel Ortiz @ 2013-02-03 17:00 UTC (permalink / raw)
To: Mark Brown; +Cc: linux-kernel, patches
Hi Mark,
On Sun, Jan 27, 2013 at 12:07:30PM +0800, Mark Brown wrote:
> The WM5102 register defaults are not up to date with the current register
> map, synchronise them with those for current devices.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/wm5102-tables.c | 95 +++++++++++++++----------------------------
> 1 file changed, 33 insertions(+), 62 deletions(-)
Applied to my for-next branch, thanks.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 07/10] mfd: wm5102: Add registers for microphone detection level configuration
2013-01-27 4:07 ` [PATCH 07/10] mfd: wm5102: Add registers for microphone detection level configuration Mark Brown
@ 2013-02-03 17:00 ` Samuel Ortiz
0 siblings, 0 replies; 15+ messages in thread
From: Samuel Ortiz @ 2013-02-03 17:00 UTC (permalink / raw)
To: Mark Brown; +Cc: linux-kernel, patches
Hi Mark,
On Sun, Jan 27, 2013 at 12:07:29PM +0800, Mark Brown wrote:
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/wm5102-tables.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
This one has build dependencies on the previous one, so I'll either let you
carry it.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-02-03 17:00 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-27 4:07 [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Mark Brown
2013-01-27 4:07 ` [PATCH 02/10] mfd: wm5102: Mark only extant DSP registers volatile Mark Brown
2013-01-27 4:07 ` [PATCH 03/10] mfd: arizona: Register MICVDD supply first to ensure no retries Mark Brown
2013-01-27 4:07 ` [PATCH 04/10] mfd: arizona: Disable control interface reporting for WM5102 and WM5110 Mark Brown
2013-01-27 4:07 ` [PATCH 05/10] mfd: arizona: Check errors from regcache_sync() Mark Brown
2013-01-27 4:07 ` [PATCH 06/10] mfd: arizona: Allow customisation of microphone detection levels Mark Brown
2013-01-27 9:44 ` Mark Brown
2013-01-27 23:56 ` Samuel Ortiz
2013-01-27 4:07 ` [PATCH 07/10] mfd: wm5102: Add registers for microphone detection level configuration Mark Brown
2013-02-03 17:00 ` Samuel Ortiz
2013-01-27 4:07 ` [PATCH 08/10] mfd: wm5102: Refresh register defaults Mark Brown
2013-02-03 17:00 ` Samuel Ortiz
2013-01-27 4:07 ` [PATCH 09/10] mfd: wm5102: Update rev B patch for latest evaluation Mark Brown
2013-01-27 4:07 ` [PATCH 10/10] mfd: arizona: Disable interrupts during resume Mark Brown
2013-02-03 17:00 ` [PATCH 01/10] mfd: wm5102: Mark DSP memory regions as volatile and readable Samuel Ortiz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).