* [PATCH V3] ARM: dts: add minimal DT support for DevKit8000
@ 2013-02-16 7:19 Anil Kumar
2013-02-20 11:58 ` Manish Badarkhe
0 siblings, 1 reply; 3+ messages in thread
From: Anil Kumar @ 2013-02-16 7:19 UTC (permalink / raw)
To: devicetree-discuss, linux-omap, linux-kernel, linux-arm-kernel
Cc: linux, b-cousson, tony, grant.likely, thomas, anilk4.v
DevKit8000 is a beagle board clone from Timll, sold by
armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
JTAG interface.
This patch adds the basic DT support for devkit8000. At this time, Information
of twl4030 (PMIC), MMC1, I2C1 and leds are added.
Signed-off-by: Anil Kumar <anilk4.v@gmail.com>
Tested-by: Thomas Weber <thomas@tomweber.eu>
---
-This patch is based on top of kernel 3.8-rc5.
-Tested on Devkit8000.
For V3:
- Remove pin mux as done at device boot time by default.
For V2:
- Change model name as "TimLL OMAP3 Devkit8000"
- Change compatible as "timll,omap3-devkit8000"
- Doing i2c1 pinmux default with pinctrl-single driver instead of i2c1
driver probe time.
:100644 100644 5ebb44f... 22ebc76... M arch/arm/boot/dts/Makefile
:000000 100644 0000000... 6338993... A arch/arm/boot/dts/omap3-devkit8000.dts
:100644 100644 53cb380b.. ccecb76... M arch/arm/mach-omap2/board-generic.c
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-devkit8000.dts | 103 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/board-generic.c | 1 +
3 files changed, 105 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5ebb44f..22ebc76 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
+ omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
new file mode 100644
index 0000000..6338993
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -0,0 +1,103 @@
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000";
+ compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "devkit8000::led1";
+ gpios = <&gpio6 26 0>; /* 186 -> LED1 */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "devkit8000::led2";
+ gpios = <&gpio6 3 0>; /* 163 -> LED2 */
+ default-state = "on";
+ linux,default-trigger = "none";
+ };
+
+ usr {
+ label = "devkit8000::led3";
+ gpios = <&gpio6 4 0>; /* 164 -> LED3 */
+ default-state = "on";
+ linux,default-trigger = "usr";
+ };
+
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&wdt2 {
+ status = "disabled";
+};
+
+&mcbsp1 {
+ status = "disabled";
+};
+
+&mcbsp2 {
+ status = "disabled";
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&mcbsp4 {
+ status = "disabled";
+};
+
+&mcbsp5 {
+ status = "disabled";
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380..ccecb76 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -110,6 +110,7 @@ MACHINE_END
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
+ "timll,omap3-devkit8000",
NULL,
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V3] ARM: dts: add minimal DT support for DevKit8000
2013-02-16 7:19 [PATCH V3] ARM: dts: add minimal DT support for DevKit8000 Anil Kumar
@ 2013-02-20 11:58 ` Manish Badarkhe
2013-02-20 13:00 ` Anil Kumar
0 siblings, 1 reply; 3+ messages in thread
From: Manish Badarkhe @ 2013-02-20 11:58 UTC (permalink / raw)
To: Anil Kumar
Cc: devicetree-discuss, linux-omap, linux-kernel, linux-arm-kernel,
linux, b-cousson, tony, grant.likely, thomas
On Sat, Feb 16, 2013 at 12:49 PM, Anil Kumar <anilk4.v@gmail.com> wrote:
> DevKit8000 is a beagle board clone from Timll, sold by
> armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
> S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
> JTAG interface.
>
> This patch adds the basic DT support for devkit8000. At this time,
> Information
> of twl4030 (PMIC), MMC1, I2C1 and leds are added.
>
> Signed-off-by: Anil Kumar <anilk4.v@gmail.com>
> Tested-by: Thomas Weber <thomas@tomweber.eu>
> ---
> -This patch is based on top of kernel 3.8-rc5.
>
> -Tested on Devkit8000.
>
> For V3:
> - Remove pin mux as done at device boot time by default.
>
> For V2:
> - Change model name as "TimLL OMAP3 Devkit8000"
> - Change compatible as "timll,omap3-devkit8000"
> - Doing i2c1 pinmux default with pinctrl-single driver instead of i2c1
> driver probe time.
>
> :100644 100644 5ebb44f... 22ebc76... M arch/arm/boot/dts/Makefile
> :000000 100644 0000000... 6338993... A
> arch/arm/boot/dts/omap3-devkit8000.dts
> :100644 100644 53cb380b.. ccecb76... M
> arch/arm/mach-omap2/board-generic.c
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/omap3-devkit8000.dts | 103
> ++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/board-generic.c | 1 +
> 3 files changed, 105 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5ebb44f..22ebc76 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
> imx28-tx28.dtb
> dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
> omap3-beagle.dtb \
> + omap3-devkit8000.dtb \
> omap3-beagle-xm.dtb \
> omap3-evm.dtb \
> omap3-tobi.dtb \
> diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts
> b/arch/arm/boot/dts/omap3-devkit8000.dts
> new file mode 100644
> index 0000000..6338993
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
> @@ -0,0 +1,103 @@
> +/*
> + * Author: Anil Kumar <anilk4.v@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +/ {
> + model = "TimLL OMAP3 Devkit8000";
> + compatible = "timll,omap3-devkit8000", "ti,omap3";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x10000000>; /* 256 MB */
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + heartbeat {
> + label = "devkit8000::led1";
> + gpios = <&gpio6 26 0>; /* 186 -> LED1 */
> + default-state = "on";
> + linux,default-trigger = "heartbeat";
> + };
> +
> + mmc {
> + label = "devkit8000::led2";
> + gpios = <&gpio6 3 0>; /* 163 -> LED2 */
> + default-state = "on";
> + linux,default-trigger = "none";
> + };
> +
> + usr {
> + label = "devkit8000::led3";
> + gpios = <&gpio6 4 0>; /* 164 -> LED3 */
> + default-state = "on";
> + linux,default-trigger = "usr";
> + };
> +
No need of extra line over here.
Thanks
Manish Badarkhe
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH V3] ARM: dts: add minimal DT support for DevKit8000
2013-02-20 11:58 ` Manish Badarkhe
@ 2013-02-20 13:00 ` Anil Kumar
0 siblings, 0 replies; 3+ messages in thread
From: Anil Kumar @ 2013-02-20 13:00 UTC (permalink / raw)
To: Manish Badarkhe
Cc: devicetree-discuss, linux-omap, linux-kernel, linux-arm-kernel,
linux, b-cousson, Tony Lindgren, Grant Likely, thomas
Hi Manish,
On Wed, Feb 20, 2013 at 5:28 PM, Manish Badarkhe
<badarkhe.manish@gmail.com> wrote:
> On Sat, Feb 16, 2013 at 12:49 PM, Anil Kumar <anilk4.v@gmail.com> wrote:
>> DevKit8000 is a beagle board clone from Timll, sold by
>> armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
>> S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
>> JTAG interface.
>>
>> This patch adds the basic DT support for devkit8000. At this time,
>> Information
>> of twl4030 (PMIC), MMC1, I2C1 and leds are added.
>>
>> Signed-off-by: Anil Kumar <anilk4.v@gmail.com>
>> Tested-by: Thomas Weber <thomas@tomweber.eu>
>> ---
>> -This patch is based on top of kernel 3.8-rc5.
>>
>> -Tested on Devkit8000.
>>
>> For V3:
>> - Remove pin mux as done at device boot time by default.
>>
>> For V2:
>> - Change model name as "TimLL OMAP3 Devkit8000"
>> - Change compatible as "timll,omap3-devkit8000"
>> - Doing i2c1 pinmux default with pinctrl-single driver instead of i2c1
>> driver probe time.
>>
>> :100644 100644 5ebb44f... 22ebc76... M arch/arm/boot/dts/Makefile
>> :000000 100644 0000000... 6338993... A
>> arch/arm/boot/dts/omap3-devkit8000.dts
>> :100644 100644 53cb380b.. ccecb76... M
>> arch/arm/mach-omap2/board-generic.c
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/omap3-devkit8000.dts | 103
>> ++++++++++++++++++++++++++++++++
>> arch/arm/mach-omap2/board-generic.c | 1 +
>> 3 files changed, 105 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 5ebb44f..22ebc76 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
>> imx28-tx28.dtb
>> dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>> omap3-beagle.dtb \
>> + omap3-devkit8000.dtb \
>> omap3-beagle-xm.dtb \
>> omap3-evm.dtb \
>> omap3-tobi.dtb \
>> diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts
>> b/arch/arm/boot/dts/omap3-devkit8000.dts
>> new file mode 100644
>> index 0000000..6338993
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
>> @@ -0,0 +1,103 @@
>> +/*
>> + * Author: Anil Kumar <anilk4.v@gmail.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +/dts-v1/;
>> +
>> +/include/ "omap3.dtsi"
>> +/ {
>> + model = "TimLL OMAP3 Devkit8000";
>> + compatible = "timll,omap3-devkit8000", "ti,omap3";
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x80000000 0x10000000>; /* 256 MB */
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> +
>> + heartbeat {
>> + label = "devkit8000::led1";
>> + gpios = <&gpio6 26 0>; /* 186 -> LED1 */
>> + default-state = "on";
>> + linux,default-trigger = "heartbeat";
>> + };
>> +
>> + mmc {
>> + label = "devkit8000::led2";
>> + gpios = <&gpio6 3 0>; /* 163 -> LED2 */
>> + default-state = "on";
>> + linux,default-trigger = "none";
>> + };
>> +
>> + usr {
>> + label = "devkit8000::led3";
>> + gpios = <&gpio6 4 0>; /* 164 -> LED3 */
>> + default-state = "on";
>> + linux,default-trigger = "usr";
>> + };
>> +
>
> No need of extra line over here.
ok,
Thanks,
Anil
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-02-20 13:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-16 7:19 [PATCH V3] ARM: dts: add minimal DT support for DevKit8000 Anil Kumar
2013-02-20 11:58 ` Manish Badarkhe
2013-02-20 13:00 ` Anil Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).