linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrzej Hajda <a.hajda@samsung.com>
To: Andrey Smirnov <andrew.smirnov@gmail.com>,
	dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Andrey Gusakov <andrey.gusakov@cogentembedded.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Cory Tusar <cory.tusar@zii.aero>, Chris Healy <cphealy@gmail.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 09/15] drm/bridge: tc358767: Use reported AUX transfer size
Date: Fri, 7 Jun 2019 08:10:44 +0200	[thread overview]
Message-ID: <136db777-5d62-642b-a359-b06ade4518b8@samsung.com> (raw)
In-Reply-To: <20190607044550.13361-10-andrew.smirnov@gmail.com>

On 07.06.2019 06:45, Andrey Smirnov wrote:
> Don't assume that requested data transfer size is the same as amount
> of data that was transferred. Change the code to get that information
> from DP0_AUXSTATUS instead.
>
> Since the check for AUX_BUSY in tc_aux_get_status() is pointless (it
> will always called after tc_aux_wait_busy()) and there's only one user
> of it, inline its code into tc_aux_transfer() instead of trying to
> accommodate the change above.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

 --
Regards
Andrzej
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Cory Tusar <cory.tusar@zii.aero>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/gpu/drm/bridge/tc358767.c | 40 ++++++++++---------------------
>  1 file changed, 12 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 8b53dc8908d3..7d0fbb12195b 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -152,10 +152,10 @@
>  #define DP0_AUXWDATA(i)		(0x066c + (i) * 4)
>  #define DP0_AUXRDATA(i)		(0x067c + (i) * 4)
>  #define DP0_AUXSTATUS		0x068c
> -#define AUX_STATUS_MASK			0xf0
> -#define AUX_STATUS_SHIFT		4
> -#define AUX_TIMEOUT			BIT(1)
> -#define AUX_BUSY			BIT(0)
> +#define AUX_BYTES		GENMASK(15, 8)
> +#define AUX_STATUS		GENMASK(7, 4)
> +#define AUX_TIMEOUT		BIT(1)
> +#define AUX_BUSY		BIT(0)
>  #define DP0_AUXI2CADR		0x0698
>  
>  /* Link Training */
> @@ -298,29 +298,6 @@ static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
>  			       1000, 1000 * timeout_ms);
>  }
>  
> -static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
> -{
> -	int ret;
> -	u32 value;
> -
> -	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &value);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (value & AUX_BUSY) {
> -		dev_err(tc->dev, "aux busy!\n");
> -		return -EBUSY;
> -	}
> -
> -	if (value & AUX_TIMEOUT) {
> -		dev_err(tc->dev, "aux access timeout!\n");
> -		return -ETIMEDOUT;
> -	}
> -
> -	*reply = (value & AUX_STATUS_MASK) >> AUX_STATUS_SHIFT;
> -	return 0;
> -}
> -
>  static int tc_aux_write_data(struct tc_data *tc, const void *data,
>  			     size_t size)
>  {
> @@ -356,6 +333,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
>  	struct tc_data *tc = aux_to_tc(aux);
>  	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
>  	u8 request = msg->request & ~DP_AUX_I2C_MOT;
> +	u32 auxstatus;
>  	int ret;
>  
>  	if (size == 0)
> @@ -393,10 +371,16 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
>  	if (ret)
>  		return ret;
>  
> -	ret = tc_aux_get_status(tc, &msg->reply);
> +	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &auxstatus);
>  	if (ret)
>  		return ret;
>  
> +	if (auxstatus & AUX_TIMEOUT)
> +		return -ETIMEDOUT;
> +
> +	size = FIELD_GET(AUX_BYTES, auxstatus);
> +	msg->reply = FIELD_GET(AUX_STATUS, auxstatus);
> +
>  	switch (request) {
>  	case DP_AUX_NATIVE_READ:
>  	case DP_AUX_I2C_READ:



  reply	other threads:[~2019-06-07  6:10 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-07  4:45 [PATCH v4 00/15] tc358767 driver improvements Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 01/15] drm/bridge: tc358767: Simplify tc_poll_timeout() Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 02/15] drm/bridge: tc358767: Simplify polling in tc_main_link_setup() Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 03/15] drm/bridge: tc358767: Simplify polling in tc_link_training() Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 04/15] drm/bridge: tc358767: Simplify tc_set_video_mode() Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 05/15] drm/bridge: tc358767: Drop custom tc_write()/tc_read() accessors Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 06/15] drm/bridge: tc358767: Simplify AUX data read Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 07/15] drm/bridge: tc358767: Simplify AUX data write Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 08/15] drm/bridge: tc358767: Increase AUX transfer length limit Andrey Smirnov
2019-06-07  4:45 ` [PATCH v4 09/15] drm/bridge: tc358767: Use reported AUX transfer size Andrey Smirnov
2019-06-07  6:10   ` Andrzej Hajda [this message]
2019-06-07  4:45 ` [PATCH v4 10/15] drm/bridge: tc358767: Add support for address-only I2C transfers Andrey Smirnov
2019-06-07  6:13   ` Andrzej Hajda
2019-06-07  4:45 ` [PATCH v4 11/15] drm/bridge: tc358767: Introduce tc_set_syspllparam() Andrey Smirnov
2019-06-07  6:15   ` Andrzej Hajda
2019-06-07  4:45 ` [PATCH v4 12/15] drm/bridge: tc358767: Introduce tc_pllupdate_pllen() Andrey Smirnov
2019-06-07  6:20   ` Andrzej Hajda
2019-06-07  4:45 ` [PATCH v4 13/15] drm/bridge: tc358767: Simplify tc_aux_wait_busy() Andrey Smirnov
2019-06-07  6:21   ` Andrzej Hajda
2019-06-07  4:45 ` [PATCH v4 14/15] drm/bridge: tc358767: Drop unnecessary 8 byte buffer Andrey Smirnov
2019-06-07  6:41   ` Andrzej Hajda
2019-06-07  4:45 ` [PATCH v4 15/15] drm/bridge: tc358767: Replace magic number in tc_main_link_enable() Andrey Smirnov
2019-06-07  6:42   ` Andrzej Hajda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=136db777-5d62-642b-a359-b06ade4518b8@samsung.com \
    --to=a.hajda@samsung.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=andrey.gusakov@cogentembedded.com \
    --cc=cory.tusar@zii.aero \
    --cc=cphealy@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).