* [GIT PULL 0/3] msm changes for 3.11
@ 2013-06-14 17:56 David Brown
2013-06-14 17:56 ` [GIT PULL 1/3] msm cleanups " David Brown
` (3 more replies)
0 siblings, 4 replies; 15+ messages in thread
From: David Brown @ 2013-06-14 17:56 UTC (permalink / raw)
To: arm
Cc: Arnd Bergmann, Olof Johansson, Nicolas Pitre, Thomas Gleixner,
Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel
The following three pull requests are for the MSM tree for 3.11. In
addition to cleanups and fixes, there is starting to be some work
toward getting full clock support in the MSM tree.
^ permalink raw reply [flat|nested] 15+ messages in thread* [GIT PULL 1/3] msm cleanups for 3.11 2013-06-14 17:56 [GIT PULL 0/3] msm changes for 3.11 David Brown @ 2013-06-14 17:56 ` David Brown 2013-06-15 1:21 ` Olof Johansson 2013-06-14 17:56 ` [GIT PULL 2/3] msm fixes " David Brown ` (2 subsequent siblings) 3 siblings, 1 reply; 15+ messages in thread From: David Brown @ 2013-06-14 17:56 UTC (permalink / raw) To: arm Cc: Arnd Bergmann, Olof Johansson, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-cleanup-for-3.11 for you to fetch changes up to 1aa3d1a3c7d235c47e30c7c8c6b5ef02fb1536b3: mfd: ssbi: Use devm_* and simplify code (2013-06-12 14:50:12 -0700) ---------------------------------------------------------------- Cleanups for MSM for 3.11 These are a handful of cleanups to the MSM tree. The gpio cleanups get us closer to having proper pinmux and gpio support. ---------------------------------------------------------------- Maxime Ripard (1): ARM: msm: Remove init_irq declaration in machine description Rohit Vaswani (4): msm: Remove unused file core.h msm: iomap: Remove unused bases and mappings ARM: msm: Remove gpiomux-v2 and re-organize MSM_GPIOMUX configs gpio: msm: Add device tree and irqdomain support for gpio-msm-v2 Stephen Boyd (1): mfd: ssbi: Use devm_* and simplify code .../devicetree/bindings/gpio/gpio-msm.txt | 26 +++ arch/arm/boot/dts/msm8660-surf.dts | 11 ++ arch/arm/boot/dts/msm8960-cdp.dts | 11 ++ arch/arm/mach-msm/Kconfig | 13 +- arch/arm/mach-msm/Makefile | 6 +- arch/arm/mach-msm/board-dt-8660.c | 2 - arch/arm/mach-msm/board-dt-8960.c | 2 - arch/arm/mach-msm/core.h | 2 - arch/arm/mach-msm/gpiomux-8x60.c | 19 -- arch/arm/mach-msm/gpiomux-v2.c | 25 --- arch/arm/mach-msm/gpiomux-v2.h | 61 ------- arch/arm/mach-msm/gpiomux.c | 15 ++ arch/arm/mach-msm/gpiomux.h | 5 - arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 7 - arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 6 - arch/arm/mach-msm/include/mach/msm_iomap.h | 2 - arch/arm/mach-msm/io.c | 4 - drivers/gpio/Kconfig | 2 +- drivers/gpio/gpio-msm-v2.c | 195 ++++++++++++--------- drivers/ssbi/ssbi.c | 69 ++------ 20 files changed, 197 insertions(+), 286 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-msm.txt delete mode 100644 arch/arm/mach-msm/core.h delete mode 100644 arch/arm/mach-msm/gpiomux-8x60.c delete mode 100644 arch/arm/mach-msm/gpiomux-v2.c delete mode 100644 arch/arm/mach-msm/gpiomux-v2.h ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL 1/3] msm cleanups for 3.11 2013-06-14 17:56 ` [GIT PULL 1/3] msm cleanups " David Brown @ 2013-06-15 1:21 ` Olof Johansson 0 siblings, 0 replies; 15+ messages in thread From: Olof Johansson @ 2013-06-15 1:21 UTC (permalink / raw) To: David Brown Cc: arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On Fri, Jun 14, 2013 at 10:56:53AM -0700, David Brown wrote: > The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: > > Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-cleanup-for-3.11 > > for you to fetch changes up to 1aa3d1a3c7d235c47e30c7c8c6b5ef02fb1536b3: > > mfd: ssbi: Use devm_* and simplify code (2013-06-12 14:50:12 -0700) > > ---------------------------------------------------------------- > Cleanups for MSM for 3.11 > > These are a handful of cleanups to the MSM tree. The gpio cleanups > get us closer to having proper pinmux and gpio support. Pulled, thanks. -Olof ^ permalink raw reply [flat|nested] 15+ messages in thread
* [GIT PULL 2/3] msm fixes for 3.11 2013-06-14 17:56 [GIT PULL 0/3] msm changes for 3.11 David Brown 2013-06-14 17:56 ` [GIT PULL 1/3] msm cleanups " David Brown @ 2013-06-14 17:56 ` David Brown 2013-06-14 17:56 ` David Brown 2013-06-14 19:52 ` [GIT PULL 3/3] msm clock " David Brown 3 siblings, 0 replies; 15+ messages in thread From: David Brown @ 2013-06-14 17:56 UTC (permalink / raw) To: arm Cc: Arnd Bergmann, Olof Johansson, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-fix-for-3.11 for you to fetch changes up to 7ba655fc965b073292349fa49fb9d16d701185bc: gpio: msm-v1: Remove errant __devinit to fix compile (2013-06-12 14:49:06 -0700) ---------------------------------------------------------------- Some minor fixes for MSM for 3.11 I don't expect these to be necessary for stable, since the fixes are to recently added code. The strncpy fix is only in debug code that isn't normally compiled or used (and is being removed in upcoming patches). ---------------------------------------------------------------- Chen Gang (1): arch: arm: mach-msm: using strlcpy instead of strncpy Stephen Boyd (3): ARM: dts: msm: Fix bad register addresses mfd: ssbi: Add MODULE_DEVICE_TABLE gpio: msm-v1: Remove errant __devinit to fix compile arch/arm/boot/dts/msm8660-surf.dts | 4 ++-- arch/arm/boot/dts/msm8960-cdp.dts | 2 +- arch/arm/mach-msm/clock-debug.c | 2 +- drivers/gpio/gpio-msm-v1.c | 2 +- drivers/ssbi/ssbi.c | 1 + 5 files changed, 6 insertions(+), 5 deletions(-) ^ permalink raw reply [flat|nested] 15+ messages in thread
* [GIT PULL 2/3] msm fixes for 3.11 2013-06-14 17:56 [GIT PULL 0/3] msm changes for 3.11 David Brown 2013-06-14 17:56 ` [GIT PULL 1/3] msm cleanups " David Brown 2013-06-14 17:56 ` [GIT PULL 2/3] msm fixes " David Brown @ 2013-06-14 17:56 ` David Brown 2013-06-15 1:26 ` Olof Johansson 2013-06-14 19:52 ` [GIT PULL 3/3] msm clock " David Brown 3 siblings, 1 reply; 15+ messages in thread From: David Brown @ 2013-06-14 17:56 UTC (permalink / raw) To: arm Cc: Arnd Bergmann, Olof Johansson, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-fix-for-3.11 for you to fetch changes up to 7ba655fc965b073292349fa49fb9d16d701185bc: gpio: msm-v1: Remove errant __devinit to fix compile (2013-06-12 14:49:06 -0700) ---------------------------------------------------------------- Some minor fixes for MSM for 3.11 I don't expect these to be necessary for stable, since the fixes are to recently added code. The strncpy fix is only in debug code that isn't normally compiled or used (and is being removed in upcoming patches). ---------------------------------------------------------------- Chen Gang (1): arch: arm: mach-msm: using strlcpy instead of strncpy Stephen Boyd (3): ARM: dts: msm: Fix bad register addresses mfd: ssbi: Add MODULE_DEVICE_TABLE gpio: msm-v1: Remove errant __devinit to fix compile arch/arm/boot/dts/msm8660-surf.dts | 4 ++-- arch/arm/boot/dts/msm8960-cdp.dts | 2 +- arch/arm/mach-msm/clock-debug.c | 2 +- drivers/gpio/gpio-msm-v1.c | 2 +- drivers/ssbi/ssbi.c | 1 + 5 files changed, 6 insertions(+), 5 deletions(-) ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL 2/3] msm fixes for 3.11 2013-06-14 17:56 ` David Brown @ 2013-06-15 1:26 ` Olof Johansson 2013-06-17 20:26 ` David Brown 0 siblings, 1 reply; 15+ messages in thread From: Olof Johansson @ 2013-06-15 1:26 UTC (permalink / raw) To: David Brown Cc: arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On Fri, Jun 14, 2013 at 10:56:55AM -0700, David Brown wrote: > The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: > > Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-fix-for-3.11 > > for you to fetch changes up to 7ba655fc965b073292349fa49fb9d16d701185bc: > > gpio: msm-v1: Remove errant __devinit to fix compile (2013-06-12 14:49:06 -0700) > > ---------------------------------------------------------------- > Some minor fixes for MSM for 3.11 > > I don't expect these to be necessary for stable, since the fixes are > to recently added code. The strncpy fix is only in debug code that > isn't normally compiled or used (and is being removed in upcoming > patches). > > ---------------------------------------------------------------- > Chen Gang (1): > arch: arm: mach-msm: using strlcpy instead of strncpy > > Stephen Boyd (3): > ARM: dts: msm: Fix bad register addresses Hmm. I see that the msm-hsuart device nodes completely lack reg entries. That's considerably more important to fix than the cosmetic unit address that's not even needed unless two nodes happen to have the same name. I ended up pulling this in underneath of the cleanup branch to resolve the add/change conflicts there. -Olof ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL 2/3] msm fixes for 3.11 2013-06-15 1:26 ` Olof Johansson @ 2013-06-17 20:26 ` David Brown 2013-06-17 20:31 ` Olof Johansson 0 siblings, 1 reply; 15+ messages in thread From: David Brown @ 2013-06-17 20:26 UTC (permalink / raw) To: Olof Johansson Cc: arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On Fri, Jun 14, 2013 at 06:26:17PM -0700, Olof Johansson wrote: >> Stephen Boyd (3): >> ARM: dts: msm: Fix bad register addresses > >Hmm. I see that the msm-hsuart device nodes completely lack reg entries. That's >considerably more important to fix than the cosmetic unit address that's not >even needed unless two nodes happen to have the same name. I'm not seeing the missing reg entries in anyone's tree. However, it appears that both of us resolved the merge conflict differently, and both did it incorrectly. How would you like this to be fixed? Should I just send you a patch based off of the current soc tree? Thanks, David -- sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL 2/3] msm fixes for 3.11 2013-06-17 20:26 ` David Brown @ 2013-06-17 20:31 ` Olof Johansson 0 siblings, 0 replies; 15+ messages in thread From: Olof Johansson @ 2013-06-17 20:31 UTC (permalink / raw) To: David Brown Cc: arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On Mon, Jun 17, 2013 at 1:26 PM, David Brown <davidb@codeaurora.org> wrote: > On Fri, Jun 14, 2013 at 06:26:17PM -0700, Olof Johansson wrote: > >>> Stephen Boyd (3): >>> ARM: dts: msm: Fix bad register addresses >> >> >> Hmm. I see that the msm-hsuart device nodes completely lack reg entries. >> That's >> considerably more important to fix than the cosmetic unit address that's >> not >> even needed unless two nodes happen to have the same name. > > > I'm not seeing the missing reg entries in anyone's tree. Me neither. Hm. I wonder what I was looking at when I said that. Nevermind. > However, it appears that both of us resolved the merge conflict > differently, and both did it incorrectly. > > How would you like this to be fixed? Should I just send you a patch > based off of the current soc tree? Yes, just send a patch, not a pull request. -Olof ^ permalink raw reply [flat|nested] 15+ messages in thread
* [GIT PULL 3/3] msm clock for 3.11 2013-06-14 17:56 [GIT PULL 0/3] msm changes for 3.11 David Brown ` (2 preceding siblings ...) 2013-06-14 17:56 ` David Brown @ 2013-06-14 19:52 ` David Brown 2013-06-15 1:35 ` Olof Johansson 2013-06-24 21:00 ` [GIT PULL v2] " David Brown 3 siblings, 2 replies; 15+ messages in thread From: David Brown @ 2013-06-14 19:52 UTC (permalink / raw) To: arm Cc: Arnd Bergmann, Olof Johansson, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-clock-for-3.11 for you to fetch changes up to f54c1c11053d8aaf318a096b8b332fd41a394a66: ARM: msm: Migrate to common clock framework (2013-06-12 14:43:31 -0700) ---------------------------------------------------------------- MSM clock updates for 3.11. Per Stephen Boyd's coverletter: This patchset moves the existing MSM clock code and affected drivers to the common clock framework. A prerequisite of moving to the common clock framework is to use clk_prepare() and clk_enable() so the first few patches migrate drivers to that call (clk_prepare() is a no-op on MSM right now). It also removes some custom clock APIs that MSM provides and finally moves the proc_comm clock code to the common struct clk. This patch series will be used as the foundation of the MSM 8660/8960 clock code that I plan to send out after this series. ---------------------------------------------------------------- Stephen Boyd (12): msm_serial: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors usb: otg: msm: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare msm: iommu: Convert to clk_prepare/unprepare msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() ARM: msm: Remove custom clk_set_flags() API ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove clock-7x30.h include file ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Migrate to common clock framework arch/arm/Kconfig | 2 +- arch/arm/mach-msm/Makefile | 10 +- arch/arm/mach-msm/board-halibut.c | 2 +- arch/arm/mach-msm/board-msm7x30.c | 2 +- arch/arm/mach-msm/board-qsd8x50.c | 2 +- arch/arm/mach-msm/board-trout-panel.c | 19 ++-- arch/arm/mach-msm/board-trout.c | 3 +- arch/arm/mach-msm/clock-7x30.h | 155 ------------------------------ arch/arm/mach-msm/clock-debug.c | 130 -------------------------- arch/arm/mach-msm/clock-pcom.c | 149 ++++++++++++++++++----------- arch/arm/mach-msm/clock-pcom.h | 31 +++--- arch/arm/mach-msm/clock.c | 166 +-------------------------------- arch/arm/mach-msm/clock.h | 51 +++------- arch/arm/mach-msm/devices-msm7x00.c | 12 ++- arch/arm/mach-msm/devices-msm7x30.c | 14 ++- arch/arm/mach-msm/devices-qsd8x50.c | 11 ++- arch/arm/mach-msm/devices.h | 15 +-- arch/arm/mach-msm/dma.c | 5 +- arch/arm/mach-msm/include/mach/board.h | 5 - arch/arm/mach-msm/include/mach/clk.h | 9 -- drivers/iommu/msm_iommu_dev.c | 20 ++-- drivers/mmc/host/msm_sdcc.c | 14 ++- drivers/tty/serial/msm_serial.c | 35 +++---- drivers/usb/phy/phy-msm-usb.c | 38 ++++---- 24 files changed, 241 insertions(+), 659 deletions(-) delete mode 100644 arch/arm/mach-msm/clock-7x30.h delete mode 100644 arch/arm/mach-msm/clock-debug.c -- sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL 3/3] msm clock for 3.11 2013-06-14 19:52 ` [GIT PULL 3/3] msm clock " David Brown @ 2013-06-15 1:35 ` Olof Johansson 2013-06-17 17:18 ` Stephen Boyd 2013-06-24 21:00 ` [GIT PULL v2] " David Brown 1 sibling, 1 reply; 15+ messages in thread From: Olof Johansson @ 2013-06-15 1:35 UTC (permalink / raw) To: David Brown Cc: arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On Fri, Jun 14, 2013 at 12:52:55PM -0700, David Brown wrote: > The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: > > Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-clock-for-3.11 > > for you to fetch changes up to f54c1c11053d8aaf318a096b8b332fd41a394a66: > > ARM: msm: Migrate to common clock framework (2013-06-12 14:43:31 -0700) > > ---------------------------------------------------------------- > MSM clock updates for 3.11. > > Per Stephen Boyd's coverletter: > > This patchset moves the existing MSM clock code and affected drivers > to the common clock framework. A prerequisite of moving to the common > clock framework is to use clk_prepare() and clk_enable() so the first > few patches migrate drivers to that call (clk_prepare() is a no-op on > MSM right now). It also removes some custom clock APIs that MSM > provides and finally moves the proc_comm clock code to the common > struct clk. > > This patch series will be used as the foundation of the MSM 8660/8960 > clock code that I plan to send out after this series. > > ---------------------------------------------------------------- > Stephen Boyd (12): > msm_serial: Convert to clk_prepare/unprepare > msm_serial: Use devm_clk_get() and properly return errors > usb: otg: msm: Convert to clk_prepare/unprepare > msm_sdcc: Convert to clk_prepare/unprepare > msm: iommu: Convert to clk_prepare/unprepare > msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() > ARM: msm: Remove custom clk_set_flags() API > ARM: msm: Remove custom clk_set_{max,min}_rate() API > ARM: msm: Remove clock-7x30.h include file > ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver > ARM: msm: Make proc_comm clock control into a platform driver > ARM: msm: Migrate to common clock framework I don't see a single ack from any of the driver subsystem maintainers for serial, usb or iommu. Some of them have been acked though, for example Felipe acked the USB one on the mailing list. I also didn't see Greg cc:d on the serial patches, which would explain why there was no ack for them. Care to repost/collect/rebuild this branch, please? It's a great cleanup and I'd be happy to take it even if it ends up coming in after -rc6. -Olof ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL 3/3] msm clock for 3.11 2013-06-15 1:35 ` Olof Johansson @ 2013-06-17 17:18 ` Stephen Boyd 2013-06-17 17:35 ` Olof Johansson 0 siblings, 1 reply; 15+ messages in thread From: Stephen Boyd @ 2013-06-17 17:18 UTC (permalink / raw) To: Olof Johansson Cc: David Brown, arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On 06/14/13 18:35, Olof Johansson wrote: > On Fri, Jun 14, 2013 at 12:52:55PM -0700, David Brown wrote: >> The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: >> >> Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) >> >> are available in the git repository at: >> >> git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-clock-for-3.11 >> >> for you to fetch changes up to f54c1c11053d8aaf318a096b8b332fd41a394a66: >> >> ARM: msm: Migrate to common clock framework (2013-06-12 14:43:31 -0700) >> >> ---------------------------------------------------------------- >> MSM clock updates for 3.11. >> >> Per Stephen Boyd's coverletter: >> >> This patchset moves the existing MSM clock code and affected drivers >> to the common clock framework. A prerequisite of moving to the common >> clock framework is to use clk_prepare() and clk_enable() so the first >> few patches migrate drivers to that call (clk_prepare() is a no-op on >> MSM right now). It also removes some custom clock APIs that MSM >> provides and finally moves the proc_comm clock code to the common >> struct clk. >> >> This patch series will be used as the foundation of the MSM 8660/8960 >> clock code that I plan to send out after this series. >> >> ---------------------------------------------------------------- >> Stephen Boyd (12): >> msm_serial: Convert to clk_prepare/unprepare >> msm_serial: Use devm_clk_get() and properly return errors >> usb: otg: msm: Convert to clk_prepare/unprepare >> msm_sdcc: Convert to clk_prepare/unprepare >> msm: iommu: Convert to clk_prepare/unprepare >> msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() >> ARM: msm: Remove custom clk_set_flags() API >> ARM: msm: Remove custom clk_set_{max,min}_rate() API >> ARM: msm: Remove clock-7x30.h include file >> ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver >> ARM: msm: Make proc_comm clock control into a platform driver >> ARM: msm: Migrate to common clock framework > I don't see a single ack from any of the driver subsystem maintainers for > serial, usb or iommu. Some of them have been acked though, for example Felipe > acked the USB one on the mailing list. > > I also didn't see Greg cc:d on the serial patches, which would explain why > there was no ack for them. > > Care to repost/collect/rebuild this branch, please? It's a great cleanup and > I'd be happy to take it even if it ends up coming in after -rc6. MAINTAINERS shows the MSM maintainers for the serial and mmc drivers so I sent them to David. The iommu driver didn't seem to have any maintainers entry so I just sent it off to David as well. It wasn't clear to me that we needed to Cc higher level maintainers at all. Perhaps we should clarify this in SubmittingPatches? ---8<----- diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 6e97e73..e87084f 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -152,6 +152,10 @@ if your change applies to a specific subsystem of the kernel, with an assigned maintainer. If so, e-mail that person. The script scripts/get_maintainer.pl can be very useful at this step. +If there is a specific maintainer and a more general maintainer it's +suggested that you email the more specific maintainer and Cc the more +general maintainer and acquire their ack. + If no maintainer is listed, or the maintainer does not respond, send your patch to the primary Linux kernel developer's mailing list, linux-kernel@vger.kernel.org. Most kernel developers monitor this -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [GIT PULL 3/3] msm clock for 3.11 2013-06-17 17:18 ` Stephen Boyd @ 2013-06-17 17:35 ` Olof Johansson 0 siblings, 0 replies; 15+ messages in thread From: Olof Johansson @ 2013-06-17 17:35 UTC (permalink / raw) To: Stephen Boyd Cc: David Brown, arm, Arnd Bergmann, Nicolas Pitre, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel On Mon, Jun 17, 2013 at 10:18 AM, Stephen Boyd <sboyd@codeaurora.org> wrote: > On 06/14/13 18:35, Olof Johansson wrote: >> On Fri, Jun 14, 2013 at 12:52:55PM -0700, David Brown wrote: >>> The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: >>> >>> Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) >>> >>> are available in the git repository at: >>> >>> git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-clock-for-3.11 >>> >>> for you to fetch changes up to f54c1c11053d8aaf318a096b8b332fd41a394a66: >>> >>> ARM: msm: Migrate to common clock framework (2013-06-12 14:43:31 -0700) >>> >>> ---------------------------------------------------------------- >>> MSM clock updates for 3.11. >>> >>> Per Stephen Boyd's coverletter: >>> >>> This patchset moves the existing MSM clock code and affected drivers >>> to the common clock framework. A prerequisite of moving to the common >>> clock framework is to use clk_prepare() and clk_enable() so the first >>> few patches migrate drivers to that call (clk_prepare() is a no-op on >>> MSM right now). It also removes some custom clock APIs that MSM >>> provides and finally moves the proc_comm clock code to the common >>> struct clk. >>> >>> This patch series will be used as the foundation of the MSM 8660/8960 >>> clock code that I plan to send out after this series. >>> >>> ---------------------------------------------------------------- >>> Stephen Boyd (12): >>> msm_serial: Convert to clk_prepare/unprepare >>> msm_serial: Use devm_clk_get() and properly return errors >>> usb: otg: msm: Convert to clk_prepare/unprepare >>> msm_sdcc: Convert to clk_prepare/unprepare >>> msm: iommu: Convert to clk_prepare/unprepare >>> msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() >>> ARM: msm: Remove custom clk_set_flags() API >>> ARM: msm: Remove custom clk_set_{max,min}_rate() API >>> ARM: msm: Remove clock-7x30.h include file >>> ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver >>> ARM: msm: Make proc_comm clock control into a platform driver >>> ARM: msm: Migrate to common clock framework >> I don't see a single ack from any of the driver subsystem maintainers for >> serial, usb or iommu. Some of them have been acked though, for example Felipe >> acked the USB one on the mailing list. >> >> I also didn't see Greg cc:d on the serial patches, which would explain why >> there was no ack for them. >> >> Care to repost/collect/rebuild this branch, please? It's a great cleanup and >> I'd be happy to take it even if it ends up coming in after -rc6. > > MAINTAINERS shows the MSM maintainers for the serial and mmc drivers so > I sent them to David. The iommu driver didn't seem to have any > maintainers entry so I just sent it off to David as well. > > It wasn't clear to me that we needed to Cc higher level maintainers at > all. Perhaps we should clarify this in SubmittingPatches? get_maintainer is pretty clear on it, pointing out all maintainers up the chain. This is normally not a problem when the maintainer sends code on up the subsystem tree (i.e. to Greg in the case of serial patches). What made me want an ack in this case is because the serial patches came in for the arm-soc tree. -Olof ^ permalink raw reply [flat|nested] 15+ messages in thread
* [GIT PULL v2] msm clock for 3.11 2013-06-14 19:52 ` [GIT PULL 3/3] msm clock " David Brown 2013-06-15 1:35 ` Olof Johansson @ 2013-06-24 21:00 ` David Brown 2013-06-24 21:02 ` Chris Ball 2013-06-28 0:06 ` Olof Johansson 1 sibling, 2 replies; 15+ messages in thread From: David Brown @ 2013-06-24 21:00 UTC (permalink / raw) To: arm Cc: Arnd Bergmann, Olof Johansson, Nicolas Pitre, Chris Ball, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel, Stephen Boyd This pull request differs from the previous one for the clock code by: - Gathered additional Acked-by lines. - A small #include fixup found by Stephen Boyd The only Ack not received was from Chris Ball, who is CC'd on this request. The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-clock-for-3.11b for you to fetch changes up to 8cc7f5338e729b79194e6c22e3c794faaef974b8: ARM: msm: Migrate to common clock framework (2013-06-24 13:08:05 -0700) ---------------------------------------------------------------- MSM clock updates for 3.11. Per Stephen Boyd's coverletter: Resending to collect higher level maintainer acks per Olof's request. The plan is to push this patchset through MSM to the arm-soc tree. This patchset moves the existing MSM clock code and affected drivers to the common clock framework. A prerequisite of moving to the common clock framework is to use clk_prepare() and clk_enable() so the first few patches migrate drivers to that call (clk_prepare() is a no-op on MSM right now). It also removes some custom clock APIs that MSM provides and finally moves the proc_comm clock code to the common struct clk. This patch series will be used as the foundation of the MSM 8660/8960 clock code that I plan to send out after this series. ---------------------------------------------------------------- Stephen Boyd (12): msm_serial: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors usb: otg: msm: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare msm: iommu: Convert to clk_prepare/unprepare msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() ARM: msm: Remove custom clk_set_flags() API ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove clock-7x30.h include file ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Migrate to common clock framework arch/arm/Kconfig | 2 +- arch/arm/mach-msm/Makefile | 10 +- arch/arm/mach-msm/board-halibut.c | 2 +- arch/arm/mach-msm/board-msm7x30.c | 2 +- arch/arm/mach-msm/board-qsd8x50.c | 2 +- arch/arm/mach-msm/board-trout-panel.c | 19 ++-- arch/arm/mach-msm/board-trout.c | 3 +- arch/arm/mach-msm/clock-7x30.h | 155 ------------------------------ arch/arm/mach-msm/clock-debug.c | 130 -------------------------- arch/arm/mach-msm/clock-pcom.c | 149 ++++++++++++++++++----------- arch/arm/mach-msm/clock-pcom.h | 31 +++--- arch/arm/mach-msm/clock.c | 166 +-------------------------------- arch/arm/mach-msm/clock.h | 51 +++------- arch/arm/mach-msm/devices-msm7x00.c | 12 ++- arch/arm/mach-msm/devices-msm7x30.c | 15 ++- arch/arm/mach-msm/devices-qsd8x50.c | 12 ++- arch/arm/mach-msm/devices.h | 15 +-- arch/arm/mach-msm/dma.c | 5 +- arch/arm/mach-msm/include/mach/board.h | 5 - arch/arm/mach-msm/include/mach/clk.h | 9 -- drivers/iommu/msm_iommu_dev.c | 20 ++-- drivers/mmc/host/msm_sdcc.c | 14 ++- drivers/tty/serial/msm_serial.c | 35 +++---- drivers/usb/phy/phy-msm-usb.c | 38 ++++---- 24 files changed, 243 insertions(+), 659 deletions(-) delete mode 100644 arch/arm/mach-msm/clock-7x30.h delete mode 100644 arch/arm/mach-msm/clock-debug.c ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL v2] msm clock for 3.11 2013-06-24 21:00 ` [GIT PULL v2] " David Brown @ 2013-06-24 21:02 ` Chris Ball 2013-06-28 0:06 ` Olof Johansson 1 sibling, 0 replies; 15+ messages in thread From: Chris Ball @ 2013-06-24 21:02 UTC (permalink / raw) To: David Brown Cc: arm, Arnd Bergmann, Olof Johansson, Nicolas Pitre, Chris Ball, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel, Stephen Boyd Hi, On Mon, Jun 24 2013, David Brown wrote: > This pull request differs from the previous one for the clock code by: > > - Gathered additional Acked-by lines. > - A small #include fixup found by Stephen Boyd > > The only Ack not received was from Chris Ball, who is CC'd on this > request. Sorry about that. For msm_sdcc.c: Acked-by: Chris Ball <cjb@laptop.org> - Chris. -- Chris Ball <chris@printf.net> <http://printf.net/> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [GIT PULL v2] msm clock for 3.11 2013-06-24 21:00 ` [GIT PULL v2] " David Brown 2013-06-24 21:02 ` Chris Ball @ 2013-06-28 0:06 ` Olof Johansson 1 sibling, 0 replies; 15+ messages in thread From: Olof Johansson @ 2013-06-28 0:06 UTC (permalink / raw) To: David Brown Cc: arm, Arnd Bergmann, Nicolas Pitre, Chris Ball, Thomas Gleixner, Russell King, linux-arm-msm, linux-arm-kernel, linux-kernel, Stephen Boyd On Mon, Jun 24, 2013 at 02:00:28PM -0700, David Brown wrote: > This pull request differs from the previous one for the clock code by: > > - Gathered additional Acked-by lines. > - A small #include fixup found by Stephen Boyd > > The only Ack not received was from Chris Ball, who is CC'd on this > request. > > The following changes since commit f722406faae2d073cc1d01063d1123c35425939e: > > Linux 3.10-rc1 (2013-05-11 17:14:08 -0700) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git tags/msm-clock-for-3.11b Thanks, pulled into next/late. This conflicts with a fixes-non-critical fix to removed code, trivially resolved. -Olof ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-06-28 0:06 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-06-14 17:56 [GIT PULL 0/3] msm changes for 3.11 David Brown 2013-06-14 17:56 ` [GIT PULL 1/3] msm cleanups " David Brown 2013-06-15 1:21 ` Olof Johansson 2013-06-14 17:56 ` [GIT PULL 2/3] msm fixes " David Brown 2013-06-14 17:56 ` David Brown 2013-06-15 1:26 ` Olof Johansson 2013-06-17 20:26 ` David Brown 2013-06-17 20:31 ` Olof Johansson 2013-06-14 19:52 ` [GIT PULL 3/3] msm clock " David Brown 2013-06-15 1:35 ` Olof Johansson 2013-06-17 17:18 ` Stephen Boyd 2013-06-17 17:35 ` Olof Johansson 2013-06-24 21:00 ` [GIT PULL v2] " David Brown 2013-06-24 21:02 ` Chris Ball 2013-06-28 0:06 ` Olof Johansson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).