From: Amit Daniel Kachhap <amit.daniel@samsung.com>
To: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>
Cc: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>
Subject: [PATCH V7 11/30] thermal: exynos: Support thermal tripping
Date: Mon, 24 Jun 2013 16:20:32 +0530 [thread overview]
Message-ID: <1372071051-3167-12-git-send-email-amit.daniel@samsung.com> (raw)
In-Reply-To: <1372071051-3167-1-git-send-email-amit.daniel@samsung.com>
TMU urgently sends active-high signal (thermal trip) to PMU, and thermal
tripping by hardware logic. Thermal tripping means that PMU cuts off the
whole power of SoC by controlling external voltage regulator.
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 45 +++++++++++++++++++++++++---
drivers/thermal/samsung/exynos_tmu_data.c | 2 +
drivers/thermal/samsung/exynos_tmu_data.h | 2 +
3 files changed, 44 insertions(+), 5 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 6fd776f..33f494e 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -117,7 +117,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info;
+ unsigned int status, trim_info = 0, con;
unsigned int rising_threshold = 0, falling_threshold = 0;
int ret = 0, threshold_code, i, trigger_levs = 0;
@@ -144,10 +144,26 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
(data->temp_error2 != 0))
data->temp_error1 = pdata->efuse_value;
- /* Count trigger levels to be enabled */
- for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
- if (pdata->trigger_levels[i])
+ if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
+ dev_err(&pdev->dev, "Invalid max trigger level\n");
+ goto out;
+ }
+
+ for (i = 0; i < pdata->max_trigger_level; i++) {
+ if (!pdata->trigger_levels[i])
+ continue;
+
+ if ((pdata->trigger_type[i] == HW_TRIP) &&
+ (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
+ dev_err(&pdev->dev, "Invalid hw trigger level\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Count trigger levels except the HW trip*/
+ if (!(pdata->trigger_type[i] == HW_TRIP))
trigger_levs++;
+ }
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
@@ -165,7 +181,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
} else if (data->soc == SOC_ARCH_EXYNOS) {
/* Write temperature code for rising and falling threshold */
- for (i = 0; i < trigger_levs; i++) {
+ for (i = 0;
+ i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
if (threshold_code < 0) {
@@ -191,6 +208,24 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
writel((reg->inten_rise_mask << reg->inten_rise_shift) |
(reg->inten_fall_mask << reg->inten_fall_shift),
data->base + reg->tmu_intclear);
+
+ /* if last threshold limit is also present */
+ i = pdata->max_trigger_level - 1;
+ if (pdata->trigger_levels[i] &&
+ (pdata->trigger_type[i] == HW_TRIP)) {
+ threshold_code = temp_to_code(data,
+ pdata->trigger_levels[i]);
+ if (threshold_code < 0) {
+ ret = threshold_code;
+ goto out;
+ }
+ rising_threshold |= threshold_code << 8 * i;
+ writel(rising_threshold,
+ data->base + reg->threshold_th0);
+ con = readl(data->base + reg->tmu_ctrl);
+ con |= (1 << reg->therm_trip_en_shift);
+ writel(con, data->base + reg->tmu_ctrl);
+ }
}
out:
clk_disable(data->clk);
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 896aa2a..6cac393 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -123,6 +123,7 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
.trigger_levels[0] = 85,
.trigger_levels[1] = 103,
.trigger_levels[2] = 110,
+ .trigger_levels[3] = 120,
.trigger_enable[0] = true,
.trigger_enable[1] = true,
.trigger_enable[2] = true,
@@ -130,6 +131,7 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
.trigger_type[0] = THROTTLE_ACTIVE,
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
+ .trigger_type[3] = HW_TRIP,
.max_trigger_level = 4,
.gain = 8,
.reference_voltage = 16,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index 0e2244f..4acf070 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -91,6 +91,8 @@
#define EXYNOS_EMUL_DATA_MASK 0xFF
#define EXYNOS_EMUL_ENABLE 0x1
+#define EXYNOS_MAX_TRIGGER_PER_REG 4
+
#if defined(CONFIG_CPU_EXYNOS4210)
extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
--
1.7.1
next prev parent reply other threads:[~2013-06-24 10:51 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-24 10:50 [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 02/30] thermal: exynos: Use ARCH_HAS_BANDGAP config to know the supported soc's Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 03/30] thermal: exynos: Remove un-necessary CPU_THERMAL dependency Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-24 15:00 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-24 15:33 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-24 10:50 ` Amit Daniel Kachhap [this message]
2013-06-24 10:50 ` [PATCH V7 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-24 15:41 ` Eduardo Valentin
2013-06-25 8:33 ` amit daniel kachhap
2013-06-25 11:39 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:36 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-24 15:50 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 20/30] thermal: exynos: use device resource management infrastructure Amit Daniel Kachhap
2013-06-25 11:41 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 21/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 22/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-24 19:43 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 23/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-24 16:37 ` Eduardo Valentin
2013-06-26 1:24 ` Jungseok Lee
2013-08-07 9:53 ` Naveen Krishna Ch
2013-06-24 10:50 ` [PATCH V7 24/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 25/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-24 19:39 ` Eduardo Valentin
2013-06-25 9:12 ` amit daniel kachhap
2013-06-25 11:46 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:38 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 26/30] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 27/30] ARM: dts: thermal: exynos: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-24 17:05 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 28/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 30/30] arm: exynos: enable ARCH_HAS_BANDGAP Amit Daniel Kachhap
2013-06-24 17:11 ` Eduardo Valentin
2013-06-24 17:13 ` [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Kukjin Kim
2013-06-24 19:51 ` Eduardo Valentin
2013-06-25 11:53 ` amit daniel kachhap
2013-06-28 5:19 ` amit daniel kachhap
2013-06-28 5:30 ` Zhang, Rui
2013-07-08 23:13 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372071051-3167-12-git-send-email-amit.daniel@samsung.com \
--to=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=eduardo.valentin@ti.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).