From: Amit Daniel Kachhap <amit.daniel@samsung.com>
To: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>
Cc: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>
Subject: [PATCH V7 26/30] thermal: exynos: Support for TMU regulator defined at device tree
Date: Mon, 24 Jun 2013 16:20:47 +0530 [thread overview]
Message-ID: <1372071051-3167-27-git-send-email-amit.daniel@samsung.com> (raw)
In-Reply-To: <1372071051-3167-1-git-send-email-amit.daniel@samsung.com>
TMU probe function now checks for a device tree defined regulator.
For compatibility reasons it is allowed to probe driver even without
this regulator defined.
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 23 +++++++++++++++++++++++
1 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 34b999b..80d1786 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -29,6 +29,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
@@ -48,6 +49,7 @@
* @clk: pointer to the clock structure.
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
+ * @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
*/
struct exynos_tmu_data {
@@ -61,6 +63,7 @@ struct exynos_tmu_data {
struct mutex lock;
struct clk *clk;
u8 temp_error1, temp_error2;
+ struct regulator *regulator;
struct thermal_sensor_conf *reg_conf;
};
@@ -511,10 +514,27 @@ static int exynos_map_dt_data(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata;
struct resource res;
+ int ret;
if (!data)
return -ENODEV;
+ /*
+ * Try enabling the regulator if found
+ * TODO: Add regulator as an SOC feature, so that regulator enable
+ * is a compulsory call.
+ */
+ data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
+ if (!IS_ERR(data->regulator)) {
+ ret = regulator_enable(data->regulator);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable vtmu\n");
+ return ret;
+ }
+ } else {
+ dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
+ }
+
data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
if (data->id < 0)
data->id = 0;
@@ -682,6 +702,9 @@ static int exynos_tmu_remove(struct platform_device *pdev)
clk_unprepare(data->clk);
+ if (!IS_ERR(data->regulator))
+ regulator_disable(data->regulator);
+
return 0;
}
--
1.7.1
next prev parent reply other threads:[~2013-06-24 10:53 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-24 10:50 [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 02/30] thermal: exynos: Use ARCH_HAS_BANDGAP config to know the supported soc's Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 03/30] thermal: exynos: Remove un-necessary CPU_THERMAL dependency Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-24 15:00 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-24 15:33 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 11/30] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-24 15:41 ` Eduardo Valentin
2013-06-25 8:33 ` amit daniel kachhap
2013-06-25 11:39 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:36 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-24 15:50 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 20/30] thermal: exynos: use device resource management infrastructure Amit Daniel Kachhap
2013-06-25 11:41 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 21/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 22/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-24 19:43 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 23/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-24 16:37 ` Eduardo Valentin
2013-06-26 1:24 ` Jungseok Lee
2013-08-07 9:53 ` Naveen Krishna Ch
2013-06-24 10:50 ` [PATCH V7 24/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 25/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-24 19:39 ` Eduardo Valentin
2013-06-25 9:12 ` amit daniel kachhap
2013-06-25 11:46 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:38 ` Eduardo Valentin
2013-06-24 10:50 ` Amit Daniel Kachhap [this message]
2013-06-24 10:50 ` [PATCH V7 27/30] ARM: dts: thermal: exynos: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-24 17:05 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 28/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 30/30] arm: exynos: enable ARCH_HAS_BANDGAP Amit Daniel Kachhap
2013-06-24 17:11 ` Eduardo Valentin
2013-06-24 17:13 ` [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Kukjin Kim
2013-06-24 19:51 ` Eduardo Valentin
2013-06-25 11:53 ` amit daniel kachhap
2013-06-28 5:19 ` amit daniel kachhap
2013-06-28 5:30 ` Zhang, Rui
2013-07-08 23:13 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372071051-3167-27-git-send-email-amit.daniel@samsung.com \
--to=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=eduardo.valentin@ti.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).