From: Kishon Vijay Abraham I <kishon@ti.com>
To: <rogerq@ti.com>, <kishon@ti.com>, <balbi@ti.com>
Cc: <bcousson@baylibre.com>, <tony@atomide.com>,
<rob.herring@calxeda.com>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <linux@arm.linux.org.uk>,
<grant.likely@linaro.org>, <s.nawrocki@samsung.com>,
<galak@codeaurora.org>, <swarren@wwwdotorg.org>,
<ian.campbell@citrix.com>, <rob@landley.net>,
<george.cherian@ti.com>, <gregkh@linuxfoundation.org>,
<linux-doc@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
Date: Mon, 2 Sep 2013 21:13:06 +0530 [thread overview]
Message-ID: <1378136591-7463-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1378136591-7463-1-git-send-email-kishon@ti.com>
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().
However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
drivers/usb/dwc3/Kconfig | 1 +
drivers/usb/dwc3/core.c | 49 ++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 ++++
4 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index e807635..471366d 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -6,11 +6,13 @@ Required properties:
- compatible: must be "snps,dwc3"
- reg : Address and length of the register set for the device
- interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
- usb-phy : array of phandle for the PHY device. The first element
in the array is expected to be a handle to the USB2/HS PHY and
the second element is expected to be a handle to the USB3/SS PHY
-
-Optional properties:
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
- tx-fifo-resize: determines if the FIFO *has* to be reallocated.
This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index cfc16dd..ad7ce83 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -3,6 +3,7 @@ config USB_DWC3
depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
depends on EXTCON
select USB_PHY
+ select GENERIC_PHY
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 428c29e..485d365 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
+
+ if (dwc->usb2_generic_phy)
+ phy_init(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_init(dwc->usb3_generic_phy);
+
mdelay(100);
/* Clear USB3 PHY reset */
@@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
{
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
+
+ if (dwc->usb2_generic_phy)
+ phy_power_off(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_power_off(dwc->usb3_generic_phy);
}
#define DWC3_ALIGN_MASK (16 - 1)
@@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
}
+ if (of_property_read_bool(node, "phys") || pdata->has_phy) {
+ dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+ if (IS_ERR(dwc->usb2_generic_phy)) {
+ dev_err(dev, "no usb2 phy configured yet");
+ return PTR_ERR(dwc->usb2_generic_phy);
+ }
+
+ dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+ if (IS_ERR(dwc->usb3_generic_phy)) {
+ dev_err(dev, "no usb3 phy configured yet");
+ return PTR_ERR(dwc->usb3_generic_phy);
+ }
+ } else {
+ dwc->usb2_generic_phy = NULL;
+ dwc->usb3_generic_phy = NULL;
+ }
+
/* default to superspeed if no maximum_speed passed */
if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
dwc->maximum_speed = USB_SPEED_SUPER;
@@ -450,6 +478,11 @@ static int dwc3_probe(struct platform_device *pdev)
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
+ if (dwc->usb2_generic_phy)
+ phy_power_on(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_power_on(dwc->usb3_generic_phy);
+
spin_lock_init(&dwc->lock);
platform_set_drvdata(pdev, dwc);
@@ -576,6 +609,11 @@ static int dwc3_remove(struct platform_device *pdev)
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ if (dwc->usb2_generic_phy)
+ phy_power_off(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_power_off(dwc->usb3_generic_phy);
+
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -673,6 +711,11 @@ static int dwc3_suspend(struct device *dev)
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
+ if (dwc->usb2_generic_phy)
+ phy_exit(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_exit(dwc->usb3_generic_phy);
+
return 0;
}
@@ -683,6 +726,12 @@ static int dwc3_resume(struct device *dev)
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
+
+ if (dwc->usb2_generic_phy)
+ phy_init(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_init(dwc->usb3_generic_phy);
+
msleep(100);
spin_lock_irqsave(&dwc->lock, flags);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f8af8d4..01ec7d7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,6 +31,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
+
/* Global constants */
#define DWC3_EP0_BOUNCE_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
@@ -613,6 +615,8 @@ struct dwc3_scratchpad_array {
* @dr_mode: requested mode of operation
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
* @dcfg: saved contents of DCFG register
* @gctl: saved contents of GCTL register
* @is_selfpowered: true when we are selfpowered
@@ -665,6 +669,9 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
+ struct phy *usb2_generic_phy;
+ struct phy *usb3_generic_phy;
+
void __iomem *regs;
size_t regs_size;
--
1.7.10.4
next prev parent reply other threads:[~2013-09-02 15:44 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-02 15:43 [PATCH 0/7] Make dwc3 use Generic PHY Framework and misc cleanup Kishon Vijay Abraham I
2013-09-02 15:43 ` [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY Kishon Vijay Abraham I
2013-09-12 10:36 ` Roger Quadros
2013-09-12 10:47 ` Vivek Gautam
2013-09-12 11:04 ` Roger Quadros
2013-09-12 11:26 ` Vivek Gautam
2013-09-12 13:11 ` Roger Quadros
2013-09-16 8:40 ` Vivek Gautam
2013-09-17 15:45 ` Felipe Balbi
2013-09-02 15:43 ` Kishon Vijay Abraham I [this message]
2013-09-12 9:27 ` [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework Vivek Gautam
2013-09-12 10:10 ` Kishon Vijay Abraham I
2013-09-12 10:27 ` Vivek Gautam
2013-10-10 10:28 ` Kishon Vijay Abraham I
2013-09-12 13:19 ` Roger Quadros
2013-09-16 2:52 ` Kishon Vijay Abraham I
2013-09-16 7:25 ` Roger Quadros
2013-10-11 15:09 ` Roger Quadros
2013-10-14 9:26 ` Kishon Vijay Abraham I
2013-10-14 10:21 ` Roger Quadros
2013-10-15 5:31 ` Kishon Vijay Abraham I
2013-10-15 7:57 ` Roger Quadros
2013-10-15 12:00 ` Felipe Balbi
2013-10-15 11:58 ` Felipe Balbi
2013-10-15 11:57 ` Felipe Balbi
2013-10-15 12:10 ` Roger Quadros
2013-10-15 13:19 ` Felipe Balbi
2013-10-15 13:48 ` Roger Quadros
2013-10-15 13:56 ` Felipe Balbi
2013-10-15 14:03 ` Roger Quadros
2013-10-15 14:12 ` Felipe Balbi
2013-09-02 15:43 ` [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to " Kishon Vijay Abraham I
2013-09-12 11:19 ` Roger Quadros
2013-09-16 3:01 ` Kishon Vijay Abraham I
2013-09-16 7:37 ` Roger Quadros
2013-10-11 15:02 ` Roger Quadros
2013-10-14 9:19 ` Kishon Vijay Abraham I
2013-10-14 9:31 ` Roger Quadros
2013-09-02 15:43 ` [PATCH 4/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/omap-phy.txt Kishon Vijay Abraham I
2013-09-12 13:23 ` Roger Quadros
2013-09-16 3:04 ` Kishon Vijay Abraham I
2013-09-02 15:43 ` [PATCH 5/7] phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/ Kishon Vijay Abraham I
2013-09-02 15:43 ` [PATCH 6/7] arm/dts: added dt properties to adapt to the new phy framwork Kishon Vijay Abraham I
2013-09-12 13:28 ` Roger Quadros
2013-09-02 15:43 ` [PATCH 7/7] drivers: phy: renamed struct omap_control_usb to struct omap_control_phy Kishon Vijay Abraham I
2013-09-12 13:42 ` Roger Quadros
2013-09-16 3:06 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378136591-7463-3-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=george.cherian@ti.com \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=ian.campbell@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=rogerq@ti.com \
--cc=s.nawrocki@samsung.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).