* [PATCH v2 0/2] Adapt phy-omap-usb2 for AM437x platform
@ 2013-10-15 6:53 George Cherian
2013-10-15 6:53 ` [PATCH v2 1/2] phy: omap-usb2: Arrange the include in alphabetical order George Cherian
2013-10-15 6:53 ` [PATCH v2 2/2] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x George Cherian
0 siblings, 2 replies; 4+ messages in thread
From: George Cherian @ 2013-10-15 6:53 UTC (permalink / raw)
To: linux-kernel, linux-doc, devicetree, linux-usb
Cc: tony, balbi, kishon, rob, ijc+devicetree, swarren, mark.rutland,
pawel.moll, rob.herring, gregkh, George Cherian
This series adapts the phy-omap-usb2 generic phy driver for AM437x.
While at that arrange the include files alphabetically (PATCH 1)
V2 of 2nd Patch which fixes the following from v1
- List comaptible entries in Documentaion
- Add usb_phy_data instead of checking compatible each time.
George Cherian (2):
phy: omap-usb2: Arrange the include in alphabetical order
phy: omap-usb2: Adapt phy-omap-usb2 for AM437x
Documentation/devicetree/bindings/usb/usb-phy.txt | 4 +-
drivers/phy/phy-omap-usb2.c | 72 +++++++++++++++--------
include/linux/usb/omap_usb.h | 10 ++++
3 files changed, 62 insertions(+), 24 deletions(-)
--
1.8.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] phy: omap-usb2: Arrange the include in alphabetical order
2013-10-15 6:53 [PATCH v2 0/2] Adapt phy-omap-usb2 for AM437x platform George Cherian
@ 2013-10-15 6:53 ` George Cherian
2013-10-15 6:53 ` [PATCH v2 2/2] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x George Cherian
1 sibling, 0 replies; 4+ messages in thread
From: George Cherian @ 2013-10-15 6:53 UTC (permalink / raw)
To: linux-kernel, linux-doc, devicetree, linux-usb
Cc: tony, balbi, kishon, rob, ijc+devicetree, swarren, mark.rutland,
pawel.moll, rob.herring, gregkh, George Cherian
This patch arranges the includes in alphabetical order
Signed-off-by: George Cherian <george.cherian@ti.com>
---
drivers/phy/phy-omap-usb2.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index bfc5c33..3e5f08c 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -16,20 +16,20 @@
*
*/
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/io.h>
#include <linux/usb/omap_usb.h>
-#include <linux/usb/phy_companion.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
-#include <linux/phy/phy.h>
-#include <linux/of_platform.h>
+#include <linux/usb/phy_companion.h>
/**
* omap_usb2_set_comparator - links the comparator present in the sytem with
--
1.8.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x
2013-10-15 6:53 [PATCH v2 0/2] Adapt phy-omap-usb2 for AM437x platform George Cherian
2013-10-15 6:53 ` [PATCH v2 1/2] phy: omap-usb2: Arrange the include in alphabetical order George Cherian
@ 2013-10-15 6:53 ` George Cherian
2013-10-15 11:51 ` Felipe Balbi
1 sibling, 1 reply; 4+ messages in thread
From: George Cherian @ 2013-10-15 6:53 UTC (permalink / raw)
To: linux-kernel, linux-doc, devicetree, linux-usb
Cc: tony, balbi, kishon, rob, ijc+devicetree, swarren, mark.rutland,
pawel.moll, rob.herring, gregkh, George Cherian
This patch adds a compatible for AM437x "ti,am43xx-usb2" to
reuse the same phy-omap-usb2 driver.
Also updated the documentation to add the new compatible.
Signed-off-by: George Cherian <george.cherian@ti.com>
---
Documentation/devicetree/bindings/usb/usb-phy.txt | 4 +-
drivers/phy/phy-omap-usb2.c | 54 +++++++++++++++++------
include/linux/usb/omap_usb.h | 10 +++++
3 files changed, 53 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
index c0245c8..309ab27 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
@@ -3,7 +3,9 @@ USB PHY
OMAP USB2 PHY
Required properties:
- - compatible: Should be "ti,omap-usb2"
+ - compatible: Should be either of
+ * "ti,omap-usb2" for OMAP4,OMAP5,DRA7
+ * "ti,am437x-usb2" for AM437x
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 3e5f08c..7c0bc6c 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -144,6 +144,35 @@ static struct phy_ops ops = {
.owner = THIS_MODULE,
};
+#ifdef CONFIG_OF
+static const struct usb_phy_data omap_usb2_data = {
+ .label = "omap_usb2",
+ .set_host = omap_usb_set_host,
+ .set_peripheral = omap_usb_set_peripheral,
+ .set_vbus = omap_usb_set_vbus,
+ .start_srp = omap_usb_start_srp,
+};
+
+static const struct usb_phy_data am437x_usb2_data = {
+ .label = "am437x_usb2",
+ .set_host = omap_usb_set_host,
+ .set_peripheral = omap_usb_set_peripheral,
+};
+
+static const struct of_device_id omap_usb2_id_table[] = {
+ {
+ .compatible = "ti,omap-usb2",
+ .data = &omap_usb2_data,
+ },
+ {
+ .compatible = "ti,am437x-usb2",
+ .data = &am437x_usb2_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
+#endif
+
static int omap_usb2_probe(struct platform_device *pdev)
{
struct omap_usb *phy;
@@ -153,9 +182,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
struct device_node *control_node;
struct platform_device *control_pdev;
+ const struct of_device_id *of_id;
+ struct usb_phy_data *phy_data;
+
+ of_id = of_match_device(of_match_ptr(omap_usb2_id_table), &pdev->dev);
- if (!node)
+ if (!of_id)
return -EINVAL;
+ phy_data = (struct usb_phy_data *)of_id->data;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy) {
@@ -172,7 +206,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
phy->dev = &pdev->dev;
phy->phy.dev = phy->dev;
- phy->phy.label = "omap-usb2";
+ phy->phy.label = phy_data->label;
phy->phy.set_suspend = omap_usb2_suspend;
phy->phy.otg = otg;
phy->phy.type = USB_PHY_TYPE_USB2;
@@ -199,10 +233,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
phy->is_suspended = 1;
omap_control_usb_phy_power(phy->control_dev, 0);
- otg->set_host = omap_usb_set_host;
- otg->set_peripheral = omap_usb_set_peripheral;
- otg->set_vbus = omap_usb_set_vbus;
- otg->start_srp = omap_usb_start_srp;
+ otg->set_host = phy_data->set_host;
+ otg->set_peripheral = phy_data->set_peripheral;
+ otg->set_vbus = phy_data->set_vbus;
+ otg->start_srp = phy_data->start_srp;
otg->phy = &phy->phy;
platform_set_drvdata(pdev, phy);
@@ -297,14 +331,6 @@ static const struct dev_pm_ops omap_usb2_pm_ops = {
#define DEV_PM_OPS NULL
#endif
-#ifdef CONFIG_OF
-static const struct of_device_id omap_usb2_id_table[] = {
- { .compatible = "ti,omap-usb2" },
- {}
-};
-MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
-#endif
-
static struct platform_driver omap_usb2_driver = {
.probe = omap_usb2_probe,
.remove = omap_usb2_remove,
diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
index 6ae2936..0c6b71c 100644
--- a/include/linux/usb/omap_usb.h
+++ b/include/linux/usb/omap_usb.h
@@ -42,6 +42,16 @@ struct omap_usb {
u8 is_suspended:1;
};
+struct usb_phy_data {
+ const char *label;
+ int (*set_host)(struct usb_otg *otg, struct usb_bus *host);
+ int (*set_peripheral)(struct usb_otg *otg,
+ struct usb_gadget *gadget);
+ int (*set_vbus)(struct usb_otg *otg, bool enabled);
+ int (*start_srp)(struct usb_otg *otg);
+ int (*start_hnp)(struct usb_otg *otg);
+};
+
#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
--
1.8.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x
2013-10-15 6:53 ` [PATCH v2 2/2] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x George Cherian
@ 2013-10-15 11:51 ` Felipe Balbi
0 siblings, 0 replies; 4+ messages in thread
From: Felipe Balbi @ 2013-10-15 11:51 UTC (permalink / raw)
To: George Cherian
Cc: linux-kernel, linux-doc, devicetree, linux-usb, tony, balbi,
kishon, rob, ijc+devicetree, swarren, mark.rutland, pawel.moll,
rob.herring, gregkh
[-- Attachment #1: Type: text/plain, Size: 3406 bytes --]
Hi,
On Tue, Oct 15, 2013 at 12:23:45PM +0530, George Cherian wrote:
> This patch adds a compatible for AM437x "ti,am43xx-usb2" to
> reuse the same phy-omap-usb2 driver.
it does more than just adding a new compatible flag.
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index 3e5f08c..7c0bc6c 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -144,6 +144,35 @@ static struct phy_ops ops = {
> .owner = THIS_MODULE,
> };
>
> +#ifdef CONFIG_OF
> +static const struct usb_phy_data omap_usb2_data = {
> + .label = "omap_usb2",
> + .set_host = omap_usb_set_host,
> + .set_peripheral = omap_usb_set_peripheral,
> + .set_vbus = omap_usb_set_vbus,
> + .start_srp = omap_usb_start_srp,
> +};
> +
> +static const struct usb_phy_data am437x_usb2_data = {
> + .label = "am437x_usb2",
> + .set_host = omap_usb_set_host,
> + .set_peripheral = omap_usb_set_peripheral,
> +};
> +
> +static const struct of_device_id omap_usb2_id_table[] = {
> + {
> + .compatible = "ti,omap-usb2",
> + .data = &omap_usb2_data,
> + },
> + {
> + .compatible = "ti,am437x-usb2",
> + .data = &am437x_usb2_data,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
> +#endif
> +
> static int omap_usb2_probe(struct platform_device *pdev)
> {
> struct omap_usb *phy;
> @@ -153,9 +182,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
> struct device_node *node = pdev->dev.of_node;
> struct device_node *control_node;
> struct platform_device *control_pdev;
> + const struct of_device_id *of_id;
> + struct usb_phy_data *phy_data;
> +
> + of_id = of_match_device(of_match_ptr(omap_usb2_id_table), &pdev->dev);
>
> - if (!node)
> + if (!of_id)
> return -EINVAL;
> + phy_data = (struct usb_phy_data *)of_id->data;
>
> phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> if (!phy) {
> @@ -172,7 +206,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
> phy->dev = &pdev->dev;
>
> phy->phy.dev = phy->dev;
> - phy->phy.label = "omap-usb2";
> + phy->phy.label = phy_data->label;
label can be set based on compatible flag:
if (of_device_is_compatible(node, "ti,omap-usb2"))
phy->phy.label = "omap-usb2";
else /* if (of_device_is_compatible(node, "ti,am437x-usb2")) */ /* default to newest */
phy->phy.label = "am437x-usb2"; /* keep name consistency */
> phy->phy.set_suspend = omap_usb2_suspend;
> phy->phy.otg = otg;
> phy->phy.type = USB_PHY_TYPE_USB2;
> @@ -199,10 +233,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
> phy->is_suspended = 1;
> omap_control_usb_phy_power(phy->control_dev, 0);
>
> - otg->set_host = omap_usb_set_host;
> - otg->set_peripheral = omap_usb_set_peripheral;
> - otg->set_vbus = omap_usb_set_vbus;
> - otg->start_srp = omap_usb_start_srp;
> + otg->set_host = phy_data->set_host;
> + otg->set_peripheral = phy_data->set_peripheral;
> + otg->set_vbus = phy_data->set_vbus;
> + otg->start_srp = phy_data->start_srp;
this doesn't look right. I would rather have feature flags so that you
could:
if (test_bit(&phy_data->flags, OMAP_USB2_HAS_SRP))
otg->start_srp = omap_usb_start_srp;
and so on. Note that you might need to add __maybe_unused annotations to
those functions otherwise you'll get unused warnings.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-15 11:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-15 6:53 [PATCH v2 0/2] Adapt phy-omap-usb2 for AM437x platform George Cherian
2013-10-15 6:53 ` [PATCH v2 1/2] phy: omap-usb2: Arrange the include in alphabetical order George Cherian
2013-10-15 6:53 ` [PATCH v2 2/2] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x George Cherian
2013-10-15 11:51 ` Felipe Balbi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).