From: Marc Carino <marc.ceeeee@gmail.com>
To: Christian Daudt <bcm@fixthebug.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Matt Porter <matt.porter@linaro.org>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Marc Carino <marc.ceeeee@gmail.com>
Subject: [PATCH v3 7/7] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
Date: Tue, 14 Jan 2014 15:48:53 -0800 [thread overview]
Message-ID: <1389743333-16741-8-git-send-email-marc.ceeeee@gmail.com> (raw)
In-Reply-To: <1389743333-16741-1-git-send-email-marc.ceeeee@gmail.com>
Add a sample DTS which will allow bootup of a board populated
with the BCM7445 chip.
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/brcmstb-7445.dts | 104 ++++++++++++++++++++++++++++++++++++
1 files changed, 104 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/brcmstb-7445.dts
diff --git a/arch/arm/boot/dts/brcmstb-7445.dts b/arch/arm/boot/dts/brcmstb-7445.dts
new file mode 100644
index 0000000..cbe73b4
--- /dev/null
+++ b/arch/arm/boot/dts/brcmstb-7445.dts
@@ -0,0 +1,104 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ model = "Broadcom STB (7445)";
+ compatible = "brcm,brcmstb-7445";
+ interrupt-parent = <&gic>;
+
+ chosen {};
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x40000000 0x40000000 0x80000000 0x40000000>;
+ };
+
+ cpupll: cpupll@0 {
+ #clock-cells = <0x0>;
+ compatible = "fixed-clock";
+ clock-frequency = <1500000000>;
+ };
+
+ cpuclk: cpu-clk-div@0 {
+ #clock-cells = <0x0>;
+ compatible = "brcm,brcmstb-cpu-clk-div";
+ reg = <0xf03e257c 0x4>;
+ clocks = <&cpupll>;
+ div-table = <0x0 0x1 0x11 0x2 0x12 0x4 0x13 0x8 0x14 0x10>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "brcm,brahma15";
+ operating-points = <0x16e360 0x0
+ 0x0b71b0 0x0
+ 0x05b8d8 0x0
+ 0x02dc6c 0x0
+ 0x016e36 0x0>;
+ clocks = <&cpuclk>;
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,brahma15";
+ device_type = "cpu";
+ reg = <1>;
+ clock-frequency = <1500000000>;
+ };
+
+ cpu@2 {
+ compatible = "brcm,brahma15";
+ device_type = "cpu";
+ reg = <2>;
+ clock-frequency = <1500000000>;
+ };
+
+ cpu@3 {
+ compatible = "brcm,brahma15";
+ device_type = "cpu";
+ reg = <3>;
+ clock-frequency = <1500000000>;
+ };
+ };
+
+ gic: interrupt-controller@ffd00000 {
+ compatible = "brcm,brahma15-gic", "arm,cortex-a15-gic";
+ reg = <0xffd01000 0x1000
+ 0xffd02000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08
+ 1 14 0xf08
+ 1 11 0xf08
+ 1 10 0xf08>;
+ };
+
+ serial@f0406b00 {
+ compatible = "ns16550a";
+ reg = <0xf0406b00 0x20>;
+ reg-shift = <0x2>;
+ reg-io-width = <0x4>;
+ interrupts = <0x0 0x4b 0x4>;
+ clock-frequency = <0x4d3f640>;
+ };
+
+ gen-ctrl {
+ compatible = "brcm,brcmstb-gen-ctrl-v1";
+ reg = <0xf0404304 0x4
+ 0xf0404308 0x4
+ 0xf03e2578 0x4
+ 0xf03e2488 0x10
+ 0xf0452000 0x20>;
+ };
+};
--
1.7.1
next prev parent reply other threads:[~2014-01-14 23:51 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-14 23:48 [PATCH v3 0/7] ARM: brcmstb: Add Broadcom STB SoC support Marc Carino
2014-01-14 23:48 ` [PATCH v3 1/7] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs Marc Carino
2014-01-14 23:48 ` [PATCH v3 2/7] ARM: brcmstb: add debug UART for earlyprintk support Marc Carino
2014-01-14 23:48 ` [PATCH v3 3/7] ARM: do CPU-specific init for Broadcom Brahma15 cores Marc Carino
2014-01-15 17:19 ` Will Deacon
2014-01-14 23:48 ` [PATCH v3 4/7] ARM: brcmstb: add CPU binding for Broadcom Brahma15 Marc Carino
2014-01-15 16:58 ` Mark Rutland
2014-01-14 23:48 ` [PATCH v3 5/7] ARM: brcmstb: add misc. DT bindings for brcm,brcmstb-* Marc Carino
2014-01-15 17:11 ` Mark Rutland
2014-01-15 17:15 ` Arnd Bergmann
2014-01-15 17:55 ` Florian Fainelli
2014-01-14 23:48 ` [PATCH v3 6/7] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 Marc Carino
2014-01-15 17:20 ` Mark Rutland
2014-01-14 23:48 ` Marc Carino [this message]
2014-01-15 13:10 ` [PATCH v3 7/7] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 Arnd Bergmann
2014-01-15 18:22 ` Marc
2014-01-16 1:03 ` Marc C
2014-01-16 11:19 ` Arnd Bergmann
2014-01-16 13:37 ` Michal Simek
2014-01-16 13:47 ` Mark Brown
2014-01-17 17:04 ` Arnd Bergmann
2014-01-23 8:58 ` Michal Simek
2014-01-23 12:25 ` Mark Brown
2014-01-15 17:40 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389743333-16741-8-git-send-email-marc.ceeeee@gmail.com \
--to=marc.ceeeee@gmail.com \
--cc=arnd@arndb.de \
--cc=bcm@fixthebug.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=matt.porter@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).