linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chase Southwood <chase.southwood@yahoo.com>
To: gregkh@linuxfoundation.org
Cc: abbotti@mev.co.uk, hsweeten@visionengravers.com,
	devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	Chase Southwood <chase.southwood@yahoo.com>,
	Chase Southwood <chase.southwoo@yahoo.com>
Subject: [PATCH 1/2] Staging: comedi: addi-data: fix lines that are over 80 characters
Date: Fri, 28 Feb 2014 01:31:20 -0600	[thread overview]
Message-ID: <1393572680-9521-1-git-send-email-chase.southwood@yahoo.com> (raw)

hwdrv_apci1564.c had numerous lines over the column limit.  This patch
splits all such lines to bring them in compliance with coding style.

Signed-off-by: Chase Southwood <chase.southwoo@yahoo.com>
---
 .../comedi/drivers/addi-data/hwdrv_apci1564.c      | 50 ++++++++++++++++------
 1 file changed, 36 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 2b47fa1..77030c5 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -324,11 +324,15 @@ static int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
 			inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
 			APCI1564_TCW_PROG);
 		ul_Command1 = ul_Command1 & 0xFFFFF9FEUL;
-		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* Stop The Timer */
+		/* Stop The Timer */
+		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER +
+			APCI1564_TCW_PROG);
 
 		devpriv->b_TimerSelectMode = ADDIDATA_TIMER;
 		if (data[1] == 1) {
-			outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
+			/* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
+			outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER +
+				APCI1564_TCW_PROG);
 			outl(0x0,
 				devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 				APCI1564_DIGITAL_IP_IRQ);
@@ -352,7 +356,9 @@ static int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
 				devpriv->iobase + APCI1564_COUNTER4 +
 				APCI1564_TCW_IRQ);
 		} else {
-			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* disable Timer interrupt */
+			/* disable Timer interrupt */
+			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER +
+				APCI1564_TCW_PROG);
 		}
 
 		/*  Loading Timebase */
@@ -370,7 +376,9 @@ static int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
 			APCI1564_TCW_PROG);
 		ul_Command1 =
 			(ul_Command1 & 0xFFF719E2UL) | 2UL << 13UL | 0x10UL;
-		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG);	/* mode 2 */
+		/* mode 2 */
+		outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER +
+			APCI1564_TCW_PROG);
 	} else if (data[0] == ADDIDATA_COUNTER) {
 		devpriv->b_TimerSelectMode = ADDIDATA_COUNTER;
 		devpriv->b_ModeSelectRegister = data[5];
@@ -380,7 +388,9 @@ static int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
 			inl(devpriv->iobase + ((data[5] - 1) * 0x20) +
 			APCI1564_TCW_PROG);
 		ul_Command1 = ul_Command1 & 0xFFFFF9FEUL;
-		outl(ul_Command1, devpriv->iobase + ((data[5] - 1) * 0x20) + APCI1564_TCW_PROG);	/* Stop The Timer */
+		/* Stop The Timer */
+		outl(ul_Command1, devpriv->iobase + ((data[5] - 1) * 0x20) +
+			APCI1564_TCW_PROG);
 
 		/* Set the reload value */
 		outl(data[3],
@@ -457,7 +467,9 @@ static int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device *d
 	if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) {
 		switch (data[1]) {
 		case 0:	/* stop the watchdog */
-			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + APCI1564_TCW_PROG);	/* disable the watchdog */
+			/* disable the watchdog */
+			outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG +
+				APCI1564_TCW_PROG);
 			break;
 		case 1:	/* start the watchdog */
 			outl(0x0001,
@@ -678,13 +690,18 @@ static void v_APCI1564_Interrupt(int irq, void *d)
 			inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
 			APCI1564_DIGITAL_IP_INTERRUPT_STATUS);
 		ui_InterruptStatus_1564 = ui_InterruptStatus_1564 & 0X000FFFF0;
-		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
-		outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + APCI1564_DIGITAL_IP_IRQ);	/* enable the interrupt */
+		/*  send signal to the sample */
+		send_sig(SIGIO, devpriv->tsk_Current, 0);
+		/* enable the interrupt */
+		outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
+			APCI1564_DIGITAL_IP_IRQ);
 		return;
 	}
 
 	if (ui_DO == 1) {
-		/*  Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt. */
+		/*  Check for Digital Output interrupt Type	*/
+		/*  1: Vcc interrupt						*/
+		/*  2: CC interrupt							*/
 		ui_Type =
 			inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
 			APCI1564_DIGITAL_OP_INTERRUPT_STATUS) & 0x3;
@@ -829,14 +846,19 @@ static int i_APCI1564_Reset(struct comedi_device *dev)
 {
 	struct addi_private *devpriv = dev->private;
 
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ);	/* disable the interrupts */
-	inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS);	/* Reset the interrupt status register */
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1);	/* Disable the and/or interrupt */
+	/* disable the interrupts */
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ);
+	/* Reset the interrupt status register */
+	inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS);
+	/* Disable the and/or interrupt */
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1);
 	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE2);
 	devpriv->b_DigitalOutputRegister = 0;
 	ui_Type = 0;
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP);	/* Resets the output channels */
-	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_INTERRUPT);	/* Disables the interrupt. */
+	/* Resets the output channels */
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP);
+	/* Disables the interrupt. */
+	outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_INTERRUPT);
 	outl(0x0,
 		devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG +
 		APCI1564_TCW_RELOAD_VALUE);
-- 
1.8.5.3


             reply	other threads:[~2014-02-28  7:31 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-28  7:31 Chase Southwood [this message]
2014-02-28  7:32 ` [PATCH 2/2] Staging: comedi: addi-data: remove unnecessary variable initializations in hwdrv_apci1564.c Chase Southwood
2014-02-28  7:52 ` [PATCH 1/2] Staging: comedi: addi-data: fix lines that are over 80 characters Dan Carpenter
2014-02-28  7:56   ` Dan Carpenter
2014-02-28  8:03     ` Chase Southwood
2014-02-28  9:15 ` [PATCH 1/2 v2] Staging: comedi: " Chase Southwood
2014-02-28  9:42   ` Dan Carpenter
2014-02-28  9:53     ` Chase Southwood
2014-02-28 22:32   ` Greg KH
2014-03-01  5:32     ` Chase Southwood
2014-02-28  9:16 ` [PATCH 2/2 v2] Staging: comedi: addi-data: remove unnecessary variable initializations in hwdrv_apci1564.c Chase Southwood
2014-03-01 10:28 ` [PATCH 1/2] Staging: comedi: introduce outl_1564_* and inl_1564_* helper functions " Chase Southwood
2014-03-01 12:44   ` Dan Carpenter
2014-03-01 12:50     ` Dan Carpenter
2014-03-02  0:12     ` Chase Southwood
2014-03-02  0:26       ` Chase Southwood
2014-03-03  2:52   ` [PATCH v2 1/2] Staging: comedi: introduce {outl,inl}_amcc() and {outl,inl}_iobase() " Chase Southwood
2014-03-03  9:27     ` Dan Carpenter
2014-03-05  0:39       ` Greg KH
2014-03-05  5:35         ` Chase Southwood
2014-03-03  2:52   ` [PATCH v2 2/2] Staging: comedi: use inl() and outl() helper functions Chase Southwood
2014-03-03  9:40     ` Dan Carpenter
2014-03-03 19:17   ` [PATCH 1/2] Staging: comedi: introduce outl_1564_* and inl_1564_* helper functions in hwdrv_apci1564.c Hartley Sweeten
2014-03-01 10:28 ` [PATCH 2/2] Staging: comedi: use " Chase Southwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393572680-9521-1-git-send-email-chase.southwood@yahoo.com \
    --to=chase.southwood@yahoo.com \
    --cc=abbotti@mev.co.uk \
    --cc=chase.southwoo@yahoo.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hsweeten@visionengravers.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).