[PATCH 0/5] Add STiH407 SoC and reference board support

[PATCH 0/5] Add STiH407 SoC and reference board support

[Maxime COQUELIN]

This series adds basic support to the STMicroelectronics STiH407 SoC and its
B2120 reference board. The STiH407 is a dual-core ARM Cortex-A9 CPU aimed at
STB market.

Giuseppe Cavallaro (2):
  ARM: STi: add pinctrl support for the STiH407 SoC
  pinctrl: st: Enhance the controller to manage unavailable registers

Maxime Coquelin (3):
  ARM: STi: Add STiH407 SoC support
  ARM: dts: Add STiH407 SoC support
  ARM: dts: STiH407: Add B2120 board support

 Documentation/arm/sti/stih407-overview.txt    |  18 +
 Documentation/devicetree/bindings/arm/sti.txt |  15 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/stih407-b2120.dts           |  78 ++++
 arch/arm/boot/dts/stih407-clock.dtsi          |  41 ++
 arch/arm/boot/dts/stih407-pinctrl.dtsi        | 618 ++++++++++++++++++++++++++
 arch/arm/boot/dts/stih407.dtsi                | 250 +++++++++++
 arch/arm/mach-sti/Kconfig                     |   9 +
 arch/arm/mach-sti/board-dt.c                  |   1 +
 drivers/pinctrl/pinctrl-st.c                  | 123 +++--
 10 files changed, 1110 insertions(+), 46 deletions(-)
 create mode 100644 Documentation/arm/sti/stih407-overview.txt
 create mode 100644 Documentation/devicetree/bindings/arm/sti.txt
 create mode 100644 arch/arm/boot/dts/stih407-b2120.dts
 create mode 100644 arch/arm/boot/dts/stih407-clock.dtsi
 create mode 100644 arch/arm/boot/dts/stih407-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/stih407.dtsi

-- 
1.9.0

[PATCH 1/5] ARM: STi: Add STiH407 SoC support

[Maxime COQUELIN]

This patch adds support to STiH407 SoC.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
 Documentation/arm/sti/stih407-overview.txt    | 18 ++++++++++++++++++
 Documentation/devicetree/bindings/arm/sti.txt | 15 +++++++++++++++
 arch/arm/mach-sti/Kconfig                     |  9 +++++++++
 arch/arm/mach-sti/board-dt.c                  |  1 +
 4 files changed, 43 insertions(+)
 create mode 100644 Documentation/arm/sti/stih407-overview.txt
 create mode 100644 Documentation/devicetree/bindings/arm/sti.txt

diff --git a/Documentation/arm/sti/stih407-overview.txt b/Documentation/arm/sti/stih407-overview.txt
new file mode 100644
index 0000000..3343f32
--- /dev/null
+++ b/Documentation/arm/sti/stih407-overview.txt
@@ -0,0 +1,18 @@
+			STiH407 Overview
+			================
+
+Introduction
+------------
+
+    The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
+    and server/connected client application for satellite, cable, terrestrial
+    and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
+    - SATA2, USB 3.0, PCIe, Gbit Ethernet
+
+  Document Author
+  ---------------
+
+  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt
new file mode 100644
index 0000000..92f16c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sti.txt
@@ -0,0 +1,15 @@
+ST STi Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the ST STiH415 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih415";
+
+Boards with the ST STiH416 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih416";
+
+Boards with the ST STiH407 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih407";
+
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d71654b..e596373 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -43,4 +43,13 @@ config SOC_STIH416
 	  and other digital audio/video applications using Flattened Device
 	  Trees.
 
+config SOC_STIH407
+	bool "STiH407 STMicroelectronics Consumer Electronics family"
+	default y
+	help
+	  This enables support for STMicroelectronics Digital Consumer
+	  Electronics family StiH407 parts, primarily targeted at set-top-box
+	  and other digital audio/video applications using Flattened Device
+	  Trees.
+
 endif
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 1217fb5..df731f2 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -36,6 +36,7 @@ static void __init stih41x_machine_init(void)
 static const char *stih41x_dt_match[] __initdata = {
 	"st,stih415",
 	"st,stih416",
+	"st,stih407",
 	NULL
 };
 
-- 
1.9.0

[PATCH 2/5] ARM: STi: add pinctrl support for the STiH407 SoC

[Maxime COQUELIN]

From: Giuseppe Cavallaro <peppe.cavallaro@st.com>

This patch adds the initial support for pinctrl based on H407 SoC.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
 drivers/pinctrl/pinctrl-st.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index 320c273..f95eecf 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -1264,6 +1264,10 @@ static struct of_device_id st_pctl_of_match[] = {
 	{ .compatible = "st,stih416-rear-pinctrl", .data = &stih416_data},
 	{ .compatible = "st,stih416-fvdp-fe-pinctrl", .data = &stih416_data},
 	{ .compatible = "st,stih416-fvdp-lite-pinctrl", .data = &stih416_data},
+	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih416_data},
+	{ .compatible = "st,stih407-front-pinctrl", .data = &stih416_data},
+	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih416_data},
+	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih416_data},
 	{ /* sentinel */ }
 };
 
-- 
1.9.0

[PATCH 3/5] pinctrl: st: Enhance the controller to manage unavailable registers

[Maxime COQUELIN]

From: Giuseppe Cavallaro <peppe.cavallaro@st.com>

This patch adds a new logic inside the st pinctrl to manage
an unsupported scenario: some sysconfig are not available!

This is the case of STiH407 where, although documented, the
following registers from SYSCFG_FLASH have been removed from the SoC.

SYSTEM_CONFIG3040
   Output Enable pad control for all PIO Alternate Functions
and
SYSTEM_ CONFIG3050
   Pull Up pad control for all PIO Alternate Functions

Without managing this condition an imprecise external abort
will be detect.

To do this the patch also reviews the st_parse_syscfgs
and other routines to manipulate the registers only if
actually available.
In any case, for example the st_parse_syscfgs detected
an error condition but no action was made in the
st_pctl_probe_dt.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
 drivers/pinctrl/pinctrl-st.c | 121 +++++++++++++++++++++++++++----------------
 1 file changed, 75 insertions(+), 46 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index f95eecf..888ee60 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -336,6 +336,19 @@ static const struct st_pctl_data  stih416_data = {
 	.alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
 };
 
+static const struct st_pctl_data  stih407_flashdata = {
+	.rt_style	= st_retime_style_none,
+	.input_delays	= stih416_delays,
+	.ninput_delays	= 14,
+	.output_delays	= stih416_delays,
+	.noutput_delays = 14,
+	.alt = 0,
+	.oe = -1, /* Not Available */
+	.pu = -1, /* Not Available */
+	.od = 60,
+	.rt = 100,
+};
+
 /* Low level functions.. */
 static inline int st_gpio_bank(int gpio)
 {
@@ -356,25 +369,27 @@ static void st_pinconf_set_config(struct st_pio_control *pc,
 	unsigned int oe_value, pu_value, od_value;
 	unsigned long mask = BIT(pin);
 
-	regmap_field_read(output_enable, &oe_value);
-	regmap_field_read(pull_up, &pu_value);
-	regmap_field_read(open_drain, &od_value);
-
-	/* Clear old values */
-	oe_value &= ~mask;
-	pu_value &= ~mask;
-	od_value &= ~mask;
-
-	if (config & ST_PINCONF_OE)
-		oe_value |= mask;
-	if (config & ST_PINCONF_PU)
-		pu_value |= mask;
-	if (config & ST_PINCONF_OD)
-		od_value |= mask;
-
-	regmap_field_write(output_enable, oe_value);
-	regmap_field_write(pull_up, pu_value);
-	regmap_field_write(open_drain, od_value);
+	if (output_enable) {
+		regmap_field_read(output_enable, &oe_value);
+		oe_value &= ~mask;
+		if (config & ST_PINCONF_OE)
+			oe_value |= mask;
+		regmap_field_write(output_enable, oe_value);
+	}
+	if (pull_up) {
+		regmap_field_read(pull_up, &pu_value);
+		pu_value &= ~mask;
+		if (config & ST_PINCONF_PU)
+			pu_value |= mask;
+		regmap_field_write(pull_up, pu_value);
+	}
+	if (open_drain) {
+		regmap_field_read(open_drain, &od_value);
+		od_value &= ~mask;
+		if (config & ST_PINCONF_OD)
+			od_value |= mask;
+		regmap_field_write(open_drain, od_value);
+	}
 }
 
 static void st_pctl_set_function(struct st_pio_control *pc,
@@ -385,6 +400,9 @@ static void st_pctl_set_function(struct st_pio_control *pc,
 	int pin = st_gpio_pin(pin_id);
 	int offset = pin * 4;
 
+	if (!alt)
+		return;
+
 	regmap_field_read(alt, &val);
 	val &= ~(0xf << offset);
 	val |= function << offset;
@@ -517,22 +535,28 @@ static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info,
 	regmap_field_write(rt_d->rt[pin], retime_config);
 }
 
-static void st_pinconf_get_direction(struct st_pio_control *pc,
-	int pin, unsigned long *config)
+static void st_pinconf_get_direction(struct st_pio_control *pc, int pin,
+				     unsigned long *config)
 {
 	unsigned int oe_value, pu_value, od_value;
 
-	regmap_field_read(pc->oe, &oe_value);
-	regmap_field_read(pc->pu, &pu_value);
-	regmap_field_read(pc->od, &od_value);
+	if (pc->oe) {
+		regmap_field_read(pc->oe, &oe_value);
+		if (oe_value & BIT(pin))
+			ST_PINCONF_PACK_OE(*config);
+	}
 
-	if (oe_value & BIT(pin))
-		ST_PINCONF_PACK_OE(*config);
-	if (pu_value & BIT(pin))
-		ST_PINCONF_PACK_PU(*config);
-	if (od_value & BIT(pin))
-		ST_PINCONF_PACK_OD(*config);
+	if (pc->pu) {
+		regmap_field_read(pc->pu, &pu_value);
+		if (pu_value & BIT(pin))
+			ST_PINCONF_PACK_PU(*config);
+	}
 
+	if (pc->od) {
+		regmap_field_read(pc->od, &od_value);
+		if (od_value & BIT(pin))
+			ST_PINCONF_PACK_OD(*config);
+	}
 }
 
 static int st_pinconf_get_retime_packed(struct st_pinctrl *info,
@@ -1051,8 +1075,21 @@ static int st_pctl_dt_setup_retime(struct st_pinctrl *info,
 	return -EINVAL;
 }
 
-static int st_parse_syscfgs(struct st_pinctrl *info,
-		int bank, struct device_node *np)
+
+static struct regmap_field *st_pc_get_value(struct device *dev,
+					    struct regmap *regmap, int bank,
+					    int data, int lsb, int msb)
+{
+	struct reg_field reg = REG_FIELD((data + bank) * 4, lsb, msb);
+
+	if (data < 0)
+		return NULL;
+
+	return devm_regmap_field_alloc(dev, regmap, reg);
+}
+
+static void st_parse_syscfgs(struct st_pinctrl *info, int bank,
+			     struct device_node *np)
 {
 	const struct st_pctl_data *data = info->data;
 	/**
@@ -1062,29 +1099,21 @@ static int st_parse_syscfgs(struct st_pinctrl *info,
 	 */
 	int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK;
 	int msb = lsb + ST_GPIO_PINS_PER_BANK - 1;
-	struct reg_field alt_reg = REG_FIELD((data->alt + bank) * 4, 0, 31);
-	struct reg_field oe_reg = REG_FIELD((data->oe + bank/4) * 4, lsb, msb);
-	struct reg_field pu_reg = REG_FIELD((data->pu + bank/4) * 4, lsb, msb);
-	struct reg_field od_reg = REG_FIELD((data->od + bank/4) * 4, lsb, msb);
 	struct st_pio_control *pc = &info->banks[bank].pc;
 	struct device *dev = info->dev;
 	struct regmap *regmap  = info->regmap;
 
-	pc->alt = devm_regmap_field_alloc(dev, regmap, alt_reg);
-	pc->oe = devm_regmap_field_alloc(dev, regmap, oe_reg);
-	pc->pu = devm_regmap_field_alloc(dev, regmap, pu_reg);
-	pc->od = devm_regmap_field_alloc(dev, regmap, od_reg);
-
-	if (IS_ERR(pc->alt) || IS_ERR(pc->oe) ||
-			IS_ERR(pc->pu) || IS_ERR(pc->od))
-		return -EINVAL;
+	pc->alt = st_pc_get_value(dev, regmap, bank, data->alt, 0, 31);
+	pc->oe = st_pc_get_value(dev, regmap, bank/4, data->oe, lsb, msb);
+	pc->pu = st_pc_get_value(dev, regmap, bank/4, data->pu, lsb, msb);
+	pc->od = st_pc_get_value(dev, regmap, bank/4, data->od, lsb, msb);
 
 	/* retime avaiable for all pins by default */
 	pc->rt_pin_mask = 0xff;
 	of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask);
 	st_pctl_dt_setup_retime(info, bank, pc);
 
-	return 0;
+	return;
 }
 
 /*
@@ -1267,7 +1296,7 @@ static struct of_device_id st_pctl_of_match[] = {
 	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih416_data},
 	{ .compatible = "st,stih407-front-pinctrl", .data = &stih416_data},
 	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih416_data},
-	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih416_data},
+	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
 	{ /* sentinel */ }
 };
 
-- 
1.9.0

[PATCH 4/5] ARM: dts: Add STiH407 SoC support

[Maxime COQUELIN]

The STiH407 is advanced multi-HD AVC processor with 3D graphics acceleration
and 1.5-GHz ARM Cortex-A9 SMP CPU.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi   |  41 +++
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 618 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stih407.dtsi         | 250 +++++++++++++
 3 files changed, 909 insertions(+)
 create mode 100644 arch/arm/boot/dts/stih407-clock.dtsi
 create mode 100644 arch/arm/boot/dts/stih407-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/stih407.dtsi

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
new file mode 100644
index 0000000..f50ac6f
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-devel@stlinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	clocks {
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		CLK_SYSIN: CLK_SYSIN {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: arm_periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <600000000>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		CLK_EXT2F_A9: clockgenC0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "CLK_S_ICN_REG_0";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
new file mode 100644
index 0000000..2d8543e
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,618 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &PIO0;
+		gpio1 = &PIO1;
+		gpio2 = &PIO2;
+		gpio3 = &PIO3;
+		gpio4 = &PIO4;
+		gpio5 = &PIO5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &PIO10;
+		gpio7 = &PIO11;
+		gpio8 = &PIO12;
+		gpio9 = &PIO13;
+		gpio10 = &PIO14;
+		gpio11 = &PIO15;
+		gpio12 = &PIO16;
+		gpio13 = &PIO17;
+		gpio14 = &PIO18;
+		gpio15 = &PIO19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &PIO20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &PIO30;
+		gpio18 = &PIO31;
+		gpio19 = &PIO32;
+		gpio20 = &PIO33;
+		gpio21 = &PIO34;
+		gpio22 = &PIO35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &PIO40;
+		gpio24 = &PIO41;
+		gpio25 = &PIO42;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			PIO0: gpio@09610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			PIO1: gpio@09611000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			PIO2: gpio@09612000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			PIO3: gpio@09613000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			PIO4: gpio@09614000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			PIO5: gpio@09615000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&PIO4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&PIO3 4 ALT1 OUT>;
+						rx = <&PIO3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&PIO2 6 ALT3 OUT>;
+						rx = <&PIO2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&PIO4 6 ALT1 BIDIR>;
+						scl = <&PIO4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&PIO5 1 ALT1 BIDIR>;
+						scl = <&PIO5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&PIO4 0 ALT6 IN>;
+						keyin1 = <&PIO4 5 ALT4 IN>;
+						keyin2 = <&PIO0 4 ALT2 IN>;
+						keyin3 = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO4 6 ALT4 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				  Almost all the boards based on STiH407 SoC have an embedded
+				  switch where the mdio/mdc have been used for managing the SMI
+				  iface via I2C. For this reason these lines can be allocated
+				  by using dedicated configuration (in case of there will be a
+				  standard PHY transceiver on-board).
+				*/
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&PIO0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&PIO0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&PIO0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&PIO0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&PIO2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&PIO2 2 ALT1 IN NICLK 500 CLK_A>;
+						clk125 = <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&PIO2 3 ALT4 OUT NICLK 1750 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&PIO0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&PIO3 0 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-out = <&PIO4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&PIO4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&PIO4 7 ALT3 OUT>;
+					};
+				};
+			};
+
+		};
+
+		pin-controller-front0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			PIO10: PIO@09200000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			PIO11: PIO@09201000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			PIO12: PIO@09202000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			PIO13: PIO@09203000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			PIO14: PIO@09204000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			PIO15: PIO@09205000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			PIO16: PIO@09206000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			PIO17: PIO@09207000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			PIO18: PIO@09208000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			PIO19: PIO@09209000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx = <&PIO17 0 ALT1 OUT>;
+						rx = <&PIO17 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&PIO16 0 ALT1 OUT>;
+						rx = <&PIO16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&PIO15 0 ALT1 OUT>;
+						rx = <&PIO15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&PIO19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&PIO19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&PIO19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&PIO19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&PIO19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&PIO19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&PIO16 6 ALT6 OUT>;
+						sd_pwren = <&PIO16 7 ALT6 OUT>;
+						sd_cd = <&PIO19 0 ALT6 IN>;
+						sd_wp = <&PIO19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&PIO10 6 ALT2 BIDIR>;
+						scl = <&PIO10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&PIO11 1 ALT2 BIDIR>;
+						scl = <&PIO11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&PIO15 6 ALT2 BIDIR>;
+						scl = <&PIO15 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-default {
+					st,pins {
+						sda = <&PIO18 6 ALT1 BIDIR>;
+						scl = <&PIO18 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-default {
+					st,pins {
+						mtsr = <&PIO12 6 ALT2 BIDIR>;
+						mrst = <&PIO12 7 ALT2 BIDIR>;
+						scl = <&PIO12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			PIO20: PIO@09210000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			PIO30: gpio@09220000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			PIO31: gpio@09221000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			PIO32: gpio@09222000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			PIO33: gpio@09223000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			PIO34: gpio@09224000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			PIO35: gpio@09225000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&PIO30 1 ALT1 BIDIR>;
+						scl = <&PIO30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&PIO34 4 ALT1 BIDIR>;
+						scl = <&PIO34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&PIO35 4 ALT1 IN>;
+						usb-pwr-enable = <&PIO35 5 ALT1 OUT>;
+						usb-vbus-valid = <&PIO35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-out = <&PIO31 1 ALT1 OUT>;
+					};
+				};
+			};
+
+		};
+
+		pin-controller-flash {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			PIO40: gpio@09230000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			PIO41: gpio@09231000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			PIO42: gpio@09232000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&PIO40 6 ALT1 BIDIR>;
+						emmc_cmd = <&PIO40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&PIO41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&PIO41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&PIO41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&PIO41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&PIO41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&PIO41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&PIO41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&PIO41 7 ALT1 BIDIR_PU>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
new file mode 100644
index 0000000..2a0566b
--- /dev/null
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-pinctrl.dtsi"
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@08761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@08760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@08760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		syscfg_sbc:sbc-syscfg@9620000{
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front:front-syscfg@9280000{
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear:rear-syscfg@9290000{
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash:flash-syscfg@92a0000{
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg:fvdp-lite-syscfg@9600000{
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core:core-syscfg@92b0000{
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+		};
+
+		syscfg_lpm:lpm-syscfg@94b5100{
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		serial@9830000{
+			compatible = "st,asc";
+			status = "disabled";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial0>;
+			clocks = <&CLK_EXT2F_A9>;
+		};
+
+		serial@9831000{
+			compatible = "st,asc";
+			status = "disabled";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&CLK_EXT2F_A9>;
+		};
+
+		serial@9832000{
+			compatible = "st,asc";
+			status = "disabled";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&CLK_EXT2F_A9>;
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			status = "disabled";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&CLK_SYSIN>;
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			status = "disabled";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&CLK_SYSIN>;
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_SYSIN>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			status = "disabled";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CLK_SYSIN>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+		};
+	};
+};
-- 
1.9.0

[PATCH 5/5] ARM: dts: STiH407: Add B2120 board support

[Maxime COQUELIN]

B2120 HDK is the reference board for STiH407 SoC.
It has the following characteristics:
 - 1GB DDR3
 - 8GB eMMC / SD-Card slot
 - 32MB NOR Flash
 - 1 x Gbit Ethernet
 - 1 x USB 3.0 port
 - 1 x Mini-PCIe
 - 1 x SATA
 - 1 x HDMI output
 - 1 x HDMI input
 - 1 x SPDIF

This patch only introduces basic functionnalities, such as I2C and UART.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
 arch/arm/boot/dts/Makefile          |  3 +-
 arch/arm/boot/dts/stih407-b2120.dts | 78 +++++++++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stih407-b2120.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0320303..d182b79 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -278,7 +278,8 @@ dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
 dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
 	stih416-b2000.dtb \
 	stih415-b2020.dtb \
-	stih416-b2020.dtb
+	stih416-b2020.dtb \
+	stih407-b2120.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
new file mode 100644
index 0000000..9c97da4
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih407.dtsi"
+/ {
+	model = "STiH407 B2120";
+	compatible = "st,stih407", "st,stih407-b2120";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells = <2>;
+				label = "Front Panel LED";
+				gpios = <&PIO4 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			green {
+				#gpio-cells = <2>;
+				gpios = <&PIO1 3 0>;
+				default-state = "off";
+			};
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+	};
+};
-- 
1.9.0

Re: [PATCH 3/5] pinctrl: st: Enhance the controller to manage unavailable registers

[Linus Walleij]

On Fri, Feb 28, 2014 at 8:17 PM, Maxime COQUELIN <maxime.coquelin@st.com> wrote:

> From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
>
> This patch adds a new logic inside the st pinctrl to manage
> an unsupported scenario: some sysconfig are not available!
>
> This is the case of STiH407 where, although documented, the
> following registers from SYSCFG_FLASH have been removed from the SoC.
>
> SYSTEM_CONFIG3040
>    Output Enable pad control for all PIO Alternate Functions
> and
> SYSTEM_ CONFIG3050
>    Pull Up pad control for all PIO Alternate Functions
>
> Without managing this condition an imprecise external abort
> will be detect.
>
> To do this the patch also reviews the st_parse_syscfgs
> and other routines to manipulate the registers only if
> actually available.
> In any case, for example the st_parse_syscfgs detected
> an error condition but no action was made in the
> st_pctl_probe_dt.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>

Hm this does not apply to my tree at all. It appears this is not
a stand-alone, patch, so it depends on some other patch to
pinctrl-sti?

Yours,
Linus Walleij

Re: [PATCH 0/5] Add STiH407 SoC and reference board support

[Linus Walleij]

On Fri, Feb 28, 2014 at 8:17 PM, Maxime COQUELIN <maxime.coquelin@st.com> wrote:

> This series adds basic support to the STMicroelectronics STiH407 SoC and its
> B2120 reference board. The STiH407 is a dual-core ARM Cortex-A9 CPU aimed at
> STB market.
>
> Giuseppe Cavallaro (2):
>   ARM: STi: add pinctrl support for the STiH407 SoC
>   pinctrl: st: Enhance the controller to manage unavailable registers
>
> Maxime Coquelin (3):
>   ARM: STi: Add STiH407 SoC support
>   ARM: dts: Add STiH407 SoC support
>   ARM: dts: STiH407: Add B2120 board support

So I'd like to take the pinctrl patch through my tree and the rest through
ARM SoC but it seems it does not apply :-/

Yours,
Linus Walleij

Re: [PATCH 0/5] Add STiH407 SoC and reference board support

[Maxime Coquelin]

Hi Linus

On 03/07/2014 04:11 AM, Linus Walleij wrote:
> On Fri, Feb 28, 2014 at 8:17 PM, Maxime COQUELIN <maxime.coquelin@st.com> wrote:
>
>> This series adds basic support to the STMicroelectronics STiH407 SoC and its
>> B2120 reference board. The STiH407 is a dual-core ARM Cortex-A9 CPU aimed at
>> STB market.
>>
>> Giuseppe Cavallaro (2):
>>    ARM: STi: add pinctrl support for the STiH407 SoC
>>    pinctrl: st: Enhance the controller to manage unavailable registers
>>
>> Maxime Coquelin (3):
>>    ARM: STi: Add STiH407 SoC support
>>    ARM: dts: Add STiH407 SoC support
>>    ARM: dts: STiH407: Add B2120 board support
>
> So I'd like to take the pinctrl patch through my tree and the rest through
> ARM SoC but it seems it does not apply :-/

Sorry, the series was based on v3.14-rc4.

I split the series in two:
	- pinctrl patches based on the linux-pinctrl/devel branch
	- ARM patches on arm_soc

Regards,
Maxime

>
> Yours,
> Linus Walleij
>

Re: [PATCH 3/5] pinctrl: st: Enhance the controller to manage unavailable registers

[Maxime Coquelin]

On 03/07/2014 04:10 AM, Linus Walleij wrote:
> On Fri, Feb 28, 2014 at 8:17 PM, Maxime COQUELIN <maxime.coquelin@st.com> wrote:
>
>> From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
>>
>> This patch adds a new logic inside the st pinctrl to manage
>> an unsupported scenario: some sysconfig are not available!
>>
>> This is the case of STiH407 where, although documented, the
>> following registers from SYSCFG_FLASH have been removed from the SoC.
>>
>> SYSTEM_CONFIG3040
>>     Output Enable pad control for all PIO Alternate Functions
>> and
>> SYSTEM_ CONFIG3050
>>     Pull Up pad control for all PIO Alternate Functions
>>
>> Without managing this condition an imprecise external abort
>> will be detect.
>>
>> To do this the patch also reviews the st_parse_syscfgs
>> and other routines to manipulate the registers only if
>> actually available.
>> In any case, for example the st_parse_syscfgs detected
>> an error condition but no action was made in the
>> st_pctl_probe_dt.
>>
>> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
>> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
>
> Hm this does not apply to my tree at all. It appears this is not
> a stand-alone, patch, so it depends on some other patch to
> pinctrl-sti?

Yes, it depends on patch 2 of the series (which is based on v3.14-rc4).
This is my mistake, the title of patch 2 is wrong:
ARM: STi: add pinctrl support for the STiH407 SoC

Should be:

pinctrl: st: add pinctrl support for the STiH407 SoC

I will resend the pinctrl patches rebased on your tree.

Thanks,
Maxime

>
> Yours,
> Linus Walleij
>