[PATCH v3 0/3] clk: s2mps11: Add support for S2MPS14 clocks

[PATCH v3 0/3] clk: s2mps11: Add support for S2MPS14 clocks

[Krzysztof Kozlowski]

Hi,

This is third version of patchset adding support for the S2MPS14
device to the s2mps11 clock driver.


The patchset *depends on*:
==========================
1. Work done by Tushar Behera:
   [PATCH V2 0/2] Add support for clocks in S5M8767
   http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27264
2. Support for S2MPS14 in main sec-core MFD driver (already in linux-next
   and Lee's tree).

Changes since v2:
=================
1. Patch 2/3: Remove MFD cells of_compatible which aren't used by child
   drivers and are not documented.
2. Added Tomasz's Review-by.

Changes since v1:
=================
1. Patch 1/3: Update driver description in Kconfig.
2. Patch 2/3: Add of_compatible to all MFD cells.
3. Add Yadwinder's Review-by.

Best regards,
Krzysztof


Krzysztof Kozlowski (3):
  clk: s2mps11: Add support for S2MPS14 clocks
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks

 Documentation/devicetree/bindings/mfd/s2mps11.txt |   24 +++++---
 drivers/clk/Kconfig                               |    8 +--
 drivers/clk/clk-s2mps11.c                         |   61 ++++++++++++++++-----
 drivers/mfd/sec-core.c                            |    3 +
 4 files changed, 68 insertions(+), 28 deletions(-)

-- 
1.7.9.5

[PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Krzysztof Kozlowski]

This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
s2mps11 clock driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 drivers/clk/Kconfig       |    8 +++---
 drivers/clk/clk-s2mps11.c |   61 ++++++++++++++++++++++++++++++++++-----------
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 6f56d3a4f010..8f9ce8ba036d 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -65,12 +65,12 @@ config COMMON_CLK_SI570
 	  clock generators.
 
 config COMMON_CLK_S2MPS11
-	tristate "Clock driver for S2MPS11/S5M8767 MFD"
+	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE
 	---help---
-	  This driver supports S2MPS11/S5M8767 crystal oscillator clock. These
-	  multi-function devices have 3 fixed-rate oscillators, clocked at
-	  32KHz each.
+	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
+	  clock. These multi-function devices have two (S2MPS14) or three
+	  (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
 
 config CLK_TWL6040
 	tristate "External McPDM functional clock from twl6040"
diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index 508875535e1e..8dafb552274f 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -1,7 +1,7 @@
 /*
  * clk-s2mps11.c - Clock driver for S2MPS11.
  *
- * Copyright (C) 2013 Samsung Electornics
+ * Copyright (C) 2013,2014 Samsung Electornics
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -13,10 +13,6 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -27,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/mfd/samsung/core.h>
 
@@ -125,7 +122,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
 	},
 };
 
-static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
+static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
+	[S2MPS11_CLK_AP] = {
+		.name = "s2mps14_ap",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+	[S2MPS11_CLK_BT] = {
+		.name = "s2mps14_bt",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+};
+
+static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
+		struct clk_init_data *clks_init)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *clk_np;
@@ -145,9 +156,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
 	if (!clk_table)
 		return ERR_PTR(-ENOMEM);
 
-	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
+		if (!clks_init[i].name)
+			continue; /* Skip clocks not present in some devices */
 		of_property_read_string_index(clk_np, "clock-output-names", i,
-				&s2mps11_clks_init[i].name);
+				&clks_init[i].name);
+	}
 
 	return clk_np;
 }
@@ -158,6 +172,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
 	struct device_node *clk_np = NULL;
 	unsigned int s2mps11_reg;
+	struct clk_init_data *clks_init;
 	int i, ret = 0;
 	u32 val;
 
@@ -168,25 +183,33 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 
 	s2mps11_clk = s2mps11_clks;
 
-	clk_np = s2mps11_clk_parse_dt(pdev);
-	if (IS_ERR(clk_np))
-		return PTR_ERR(clk_np);
-
 	switch (platform_get_device_id(pdev)->driver_data) {
 	case S2MPS11X:
 		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
+		clks_init = s2mps11_clks_init;
+		break;
+	case S2MPS14X:
+		s2mps11_reg = S2MPS14_REG_RTCCTRL;
+		clks_init = s2mps14_clks_init;
 		break;
 	case S5M8767X:
 		s2mps11_reg = S5M8767_REG_CTRL1;
+		clks_init = s2mps11_clks_init;
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid device type\n");
 		return -EINVAL;
 	};
 
+	clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
+	if (IS_ERR(clk_np))
+		return PTR_ERR(clk_np);
+
 	for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
+		if (!clks_init[i].name)
+			continue; /* Skip clocks not present in some devices */
 		s2mps11_clk->iodev = iodev;
-		s2mps11_clk->hw.init = &s2mps11_clks_init[i];
+		s2mps11_clk->hw.init = &clks_init[i];
 		s2mps11_clk->mask = 1 << i;
 		s2mps11_clk->reg = s2mps11_reg;
 
@@ -220,8 +243,12 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	}
 
 	if (clk_table) {
-		for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+		for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
+			/* Skip clocks not present on S2MPS14 */
+			if (!clks_init[i].name)
+				continue;
 			clk_table[i] = s2mps11_clks[i].clk;
+		}
 
 		clk_data.clks = clk_table;
 		clk_data.clk_num = S2MPS11_CLKS_NUM;
@@ -250,14 +277,18 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
 	struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
+		if (!s2mps11_clks[i].lookup)
+			continue; /* Skip clocks not present in some devices */
 		clkdev_drop(s2mps11_clks[i].lookup);
+	}
 
 	return 0;
 }
 
 static const struct platform_device_id s2mps11_clk_id[] = {
 	{ "s2mps11-clk", S2MPS11X},
+	{ "s2mps14-clk", S2MPS14X},
 	{ "s5m8767-clk", S5M8767X},
 	{ },
 };
-- 
1.7.9.5

[PATCH v3 2/3] mfd: sec-core: Add of_compatible strings for clock MFD cells

[Krzysztof Kozlowski]

Add of_compatible strings for S5M8767 and S2MPS14 clock MFD cells.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/mfd/sec-core.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index d163c66edebb..716606479235 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -59,6 +59,7 @@ static const struct mfd_cell s5m8767_devs[] = {
 		.name = "s5m-rtc",
 	}, {
 		.name = "s5m8767-clk",
+		.of_compatible = "samsung,s5m8767-clk",
 	}
 };
 
@@ -67,6 +68,7 @@ static const struct mfd_cell s2mps11_devs[] = {
 		.name = "s2mps11-pmic",
 	}, {
 		.name = "s2mps11-clk",
+		.of_compatible = "samsung,s2mps11-clk",
 	}
 };
 
@@ -77,6 +79,7 @@ static const struct mfd_cell s2mps14_devs[] = {
 		.name = "s2mps14-rtc",
 	}, {
 		.name = "s2mps14-clk",
+		.of_compatible = "samsung,s2mps14-clk",
 	}
 };
 
-- 
1.7.9.5

[PATCH v3 3/3] Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks

[Krzysztof Kozlowski]

Add bindings documentation for clocks on S5M8767 and S2MPS14 devices.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt |   24 +++++++++++++--------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 15ee89c3cc7b..67ea05ca8050 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -16,20 +16,25 @@ Optional properties:
 - interrupts: Interrupt specifiers for interrupt sources.
 
 Optional nodes:
-- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
-  register these as clocks with common clock framework instantiate a sub-node
-  named "clocks". It uses the common clock binding documented in :
+- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
+  outputs, so to register these as clocks with common clock framework
+  instantiate a sub-node named "clocks". It uses the common clock binding
+  documented in :
   [Documentation/devicetree/bindings/clock/clock-bindings.txt]
+  The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
   - #clock-cells: should be 1.
 
   - The following is the list of clocks generated by the controller. Each clock
     is assigned an identifier and client nodes use this identifier to specify
     the clock which they consume.
-    Clock               ID
-    ----------------------
-    32KhzAP		0
-    32KhzCP		1
-    32KhzBT		2
+    Clock               ID           Devices
+    ----------------------------------------------------------
+    32KhzAP		0            S2MPS11, S2MPS14, S5M8767
+    32KhzCP		1            S2MPS11, S5M8767
+    32KhzBT		2            S2MPS11, S2MPS14, S5M8767
+
+  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
+		"samsung,s5m8767-clk"
 
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -71,7 +76,8 @@ Example:
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
 
-		s2m_osc: clocks{
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
 			#clock-cells = 1;
 			clock-output-names = "xx", "yy", "zz";
 		};
-- 
1.7.9.5

Re: [PATCH v3 2/3] mfd: sec-core: Add of_compatible strings for clock MFD cells

[Tomasz Figa]

Hi Krzysztof,

On 17.03.2014 10:19, Krzysztof Kozlowski wrote:
> Add of_compatible strings for S5M8767 and S2MPS14 clock MFD cells.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>   drivers/mfd/sec-core.c |    3 +++
>   1 file changed, 3 insertions(+)

Reviewed-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz

Re: [PATCH v3 2/3] mfd: sec-core: Add of_compatible strings for clock MFD cells

[Lee Jones]

> Add of_compatible strings for S5M8767 and S2MPS14 clock MFD cells.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/mfd/sec-core.c |    3 +++
>  1 file changed, 3 insertions(+)

Applied with Tomasz' Reviewed-by.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 3/3] Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks

[Lee Jones]

> Add bindings documentation for clocks on S5M8767 and S2MPS14 devices.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Tomasz Figa <t.figa@samsung.com>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> ---
>  Documentation/devicetree/bindings/mfd/s2mps11.txt |   24 +++++++++++++--------
>  1 file changed, 15 insertions(+), 9 deletions(-)

Applied, thanks.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Mike Turquette]

Quoting Krzysztof Kozlowski (2014-03-17 02:19:16)
> This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> s2mps11 clock driver.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>

This does not apply cleanly to to clk tree trip, nor does it compile
after manually merging due to changes introducing
linux/mfd/samsung/s2mps14.h.

The changes look OK to me so maybe Lee can take it with my Ack?

Acked-by: Mike Turquette <mturquette@linaro.org>

Regards,
Mike

> ---
>  drivers/clk/Kconfig       |    8 +++---
>  drivers/clk/clk-s2mps11.c |   61 ++++++++++++++++++++++++++++++++++-----------
>  2 files changed, 50 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 6f56d3a4f010..8f9ce8ba036d 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -65,12 +65,12 @@ config COMMON_CLK_SI570
>           clock generators.
>  
>  config COMMON_CLK_S2MPS11
> -       tristate "Clock driver for S2MPS11/S5M8767 MFD"
> +       tristate "Clock driver for S2MPS1X/S5M8767 MFD"
>         depends on MFD_SEC_CORE
>         ---help---
> -         This driver supports S2MPS11/S5M8767 crystal oscillator clock. These
> -         multi-function devices have 3 fixed-rate oscillators, clocked at
> -         32KHz each.
> +         This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
> +         clock. These multi-function devices have two (S2MPS14) or three
> +         (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
>  
>  config CLK_TWL6040
>         tristate "External McPDM functional clock from twl6040"
> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
> index 508875535e1e..8dafb552274f 100644
> --- a/drivers/clk/clk-s2mps11.c
> +++ b/drivers/clk/clk-s2mps11.c
> @@ -1,7 +1,7 @@
>  /*
>   * clk-s2mps11.c - Clock driver for S2MPS11.
>   *
> - * Copyright (C) 2013 Samsung Electornics
> + * Copyright (C) 2013,2014 Samsung Electornics
>   *
>   * This program is free software; you can redistribute  it and/or modify it
>   * under  the terms of  the GNU General  Public License as published by the
> @@ -13,10 +13,6 @@
>   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>   * GNU General Public License for more details.
>   *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> - *
>   */
>  
>  #include <linux/module.h>
> @@ -27,6 +23,7 @@
>  #include <linux/clk-provider.h>
>  #include <linux/platform_device.h>
>  #include <linux/mfd/samsung/s2mps11.h>
> +#include <linux/mfd/samsung/s2mps14.h>
>  #include <linux/mfd/samsung/s5m8767.h>
>  #include <linux/mfd/samsung/core.h>
>  
> @@ -125,7 +122,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
>         },
>  };
>  
> -static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
> +static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
> +       [S2MPS11_CLK_AP] = {
> +               .name = "s2mps14_ap",
> +               .ops = &s2mps11_clk_ops,
> +               .flags = CLK_IS_ROOT,
> +       },
> +       [S2MPS11_CLK_BT] = {
> +               .name = "s2mps14_bt",
> +               .ops = &s2mps11_clk_ops,
> +               .flags = CLK_IS_ROOT,
> +       },
> +};
> +
> +static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
> +               struct clk_init_data *clks_init)
>  {
>         struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
>         struct device_node *clk_np;
> @@ -145,9 +156,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
>         if (!clk_table)
>                 return ERR_PTR(-ENOMEM);
>  
> -       for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> +       for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> +               if (!clks_init[i].name)
> +                       continue; /* Skip clocks not present in some devices */
>                 of_property_read_string_index(clk_np, "clock-output-names", i,
> -                               &s2mps11_clks_init[i].name);
> +                               &clks_init[i].name);
> +       }
>  
>         return clk_np;
>  }
> @@ -158,6 +172,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>         struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
>         struct device_node *clk_np = NULL;
>         unsigned int s2mps11_reg;
> +       struct clk_init_data *clks_init;
>         int i, ret = 0;
>         u32 val;
>  
> @@ -168,25 +183,33 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>  
>         s2mps11_clk = s2mps11_clks;
>  
> -       clk_np = s2mps11_clk_parse_dt(pdev);
> -       if (IS_ERR(clk_np))
> -               return PTR_ERR(clk_np);
> -
>         switch (platform_get_device_id(pdev)->driver_data) {
>         case S2MPS11X:
>                 s2mps11_reg = S2MPS11_REG_RTC_CTRL;
> +               clks_init = s2mps11_clks_init;
> +               break;
> +       case S2MPS14X:
> +               s2mps11_reg = S2MPS14_REG_RTCCTRL;
> +               clks_init = s2mps14_clks_init;
>                 break;
>         case S5M8767X:
>                 s2mps11_reg = S5M8767_REG_CTRL1;
> +               clks_init = s2mps11_clks_init;
>                 break;
>         default:
>                 dev_err(&pdev->dev, "Invalid device type\n");
>                 return -EINVAL;
>         };
>  
> +       clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
> +       if (IS_ERR(clk_np))
> +               return PTR_ERR(clk_np);
> +
>         for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
> +               if (!clks_init[i].name)
> +                       continue; /* Skip clocks not present in some devices */
>                 s2mps11_clk->iodev = iodev;
> -               s2mps11_clk->hw.init = &s2mps11_clks_init[i];
> +               s2mps11_clk->hw.init = &clks_init[i];
>                 s2mps11_clk->mask = 1 << i;
>                 s2mps11_clk->reg = s2mps11_reg;
>  
> @@ -220,8 +243,12 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>         }
>  
>         if (clk_table) {
> -               for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> +               for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> +                       /* Skip clocks not present on S2MPS14 */
> +                       if (!clks_init[i].name)
> +                               continue;
>                         clk_table[i] = s2mps11_clks[i].clk;
> +               }
>  
>                 clk_data.clks = clk_table;
>                 clk_data.clk_num = S2MPS11_CLKS_NUM;
> @@ -250,14 +277,18 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
>         struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev);
>         int i;
>  
> -       for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> +       for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> +               if (!s2mps11_clks[i].lookup)
> +                       continue; /* Skip clocks not present in some devices */
>                 clkdev_drop(s2mps11_clks[i].lookup);
> +       }
>  
>         return 0;
>  }
>  
>  static const struct platform_device_id s2mps11_clk_id[] = {
>         { "s2mps11-clk", S2MPS11X},
> +       { "s2mps14-clk", S2MPS14X},
>         { "s5m8767-clk", S5M8767X},
>         { },
>  };
> -- 
> 1.7.9.5
> 

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Mike Turquette]

Quoting Krzysztof Kozlowski (2014-03-17 02:19:16)
> This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> s2mps11 clock driver.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>

Taken into clk-next.

Regards,
Mike

> ---
>  drivers/clk/Kconfig       |    8 +++---
>  drivers/clk/clk-s2mps11.c |   61 ++++++++++++++++++++++++++++++++++-----------
>  2 files changed, 50 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 6f56d3a4f010..8f9ce8ba036d 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -65,12 +65,12 @@ config COMMON_CLK_SI570
>           clock generators.
>  
>  config COMMON_CLK_S2MPS11
> -       tristate "Clock driver for S2MPS11/S5M8767 MFD"
> +       tristate "Clock driver for S2MPS1X/S5M8767 MFD"
>         depends on MFD_SEC_CORE
>         ---help---
> -         This driver supports S2MPS11/S5M8767 crystal oscillator clock. These
> -         multi-function devices have 3 fixed-rate oscillators, clocked at
> -         32KHz each.
> +         This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
> +         clock. These multi-function devices have two (S2MPS14) or three
> +         (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
>  
>  config CLK_TWL6040
>         tristate "External McPDM functional clock from twl6040"
> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
> index 508875535e1e..8dafb552274f 100644
> --- a/drivers/clk/clk-s2mps11.c
> +++ b/drivers/clk/clk-s2mps11.c
> @@ -1,7 +1,7 @@
>  /*
>   * clk-s2mps11.c - Clock driver for S2MPS11.
>   *
> - * Copyright (C) 2013 Samsung Electornics
> + * Copyright (C) 2013,2014 Samsung Electornics
>   *
>   * This program is free software; you can redistribute  it and/or modify it
>   * under  the terms of  the GNU General  Public License as published by the
> @@ -13,10 +13,6 @@
>   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>   * GNU General Public License for more details.
>   *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> - *
>   */
>  
>  #include <linux/module.h>
> @@ -27,6 +23,7 @@
>  #include <linux/clk-provider.h>
>  #include <linux/platform_device.h>
>  #include <linux/mfd/samsung/s2mps11.h>
> +#include <linux/mfd/samsung/s2mps14.h>
>  #include <linux/mfd/samsung/s5m8767.h>
>  #include <linux/mfd/samsung/core.h>
>  
> @@ -125,7 +122,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
>         },
>  };
>  
> -static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
> +static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
> +       [S2MPS11_CLK_AP] = {
> +               .name = "s2mps14_ap",
> +               .ops = &s2mps11_clk_ops,
> +               .flags = CLK_IS_ROOT,
> +       },
> +       [S2MPS11_CLK_BT] = {
> +               .name = "s2mps14_bt",
> +               .ops = &s2mps11_clk_ops,
> +               .flags = CLK_IS_ROOT,
> +       },
> +};
> +
> +static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
> +               struct clk_init_data *clks_init)
>  {
>         struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
>         struct device_node *clk_np;
> @@ -145,9 +156,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
>         if (!clk_table)
>                 return ERR_PTR(-ENOMEM);
>  
> -       for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> +       for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> +               if (!clks_init[i].name)
> +                       continue; /* Skip clocks not present in some devices */
>                 of_property_read_string_index(clk_np, "clock-output-names", i,
> -                               &s2mps11_clks_init[i].name);
> +                               &clks_init[i].name);
> +       }
>  
>         return clk_np;
>  }
> @@ -158,6 +172,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>         struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
>         struct device_node *clk_np = NULL;
>         unsigned int s2mps11_reg;
> +       struct clk_init_data *clks_init;
>         int i, ret = 0;
>         u32 val;
>  
> @@ -168,25 +183,33 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>  
>         s2mps11_clk = s2mps11_clks;
>  
> -       clk_np = s2mps11_clk_parse_dt(pdev);
> -       if (IS_ERR(clk_np))
> -               return PTR_ERR(clk_np);
> -
>         switch (platform_get_device_id(pdev)->driver_data) {
>         case S2MPS11X:
>                 s2mps11_reg = S2MPS11_REG_RTC_CTRL;
> +               clks_init = s2mps11_clks_init;
> +               break;
> +       case S2MPS14X:
> +               s2mps11_reg = S2MPS14_REG_RTCCTRL;
> +               clks_init = s2mps14_clks_init;
>                 break;
>         case S5M8767X:
>                 s2mps11_reg = S5M8767_REG_CTRL1;
> +               clks_init = s2mps11_clks_init;
>                 break;
>         default:
>                 dev_err(&pdev->dev, "Invalid device type\n");
>                 return -EINVAL;
>         };
>  
> +       clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
> +       if (IS_ERR(clk_np))
> +               return PTR_ERR(clk_np);
> +
>         for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
> +               if (!clks_init[i].name)
> +                       continue; /* Skip clocks not present in some devices */
>                 s2mps11_clk->iodev = iodev;
> -               s2mps11_clk->hw.init = &s2mps11_clks_init[i];
> +               s2mps11_clk->hw.init = &clks_init[i];
>                 s2mps11_clk->mask = 1 << i;
>                 s2mps11_clk->reg = s2mps11_reg;
>  
> @@ -220,8 +243,12 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>         }
>  
>         if (clk_table) {
> -               for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> +               for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> +                       /* Skip clocks not present on S2MPS14 */
> +                       if (!clks_init[i].name)
> +                               continue;
>                         clk_table[i] = s2mps11_clks[i].clk;
> +               }
>  
>                 clk_data.clks = clk_table;
>                 clk_data.clk_num = S2MPS11_CLKS_NUM;
> @@ -250,14 +277,18 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
>         struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev);
>         int i;
>  
> -       for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> +       for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> +               if (!s2mps11_clks[i].lookup)
> +                       continue; /* Skip clocks not present in some devices */
>                 clkdev_drop(s2mps11_clks[i].lookup);
> +       }
>  
>         return 0;
>  }
>  
>  static const struct platform_device_id s2mps11_clk_id[] = {
>         { "s2mps11-clk", S2MPS11X},
> +       { "s2mps14-clk", S2MPS14X},
>         { "s5m8767-clk", S5M8767X},
>         { },
>  };
> -- 
> 1.7.9.5
> 

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Mike Turquette]

On Tue, Mar 18, 2014 at 6:09 PM, Mike Turquette <mturquette@linaro.org> wrote:
> Quoting Krzysztof Kozlowski (2014-03-17 02:19:16)
>> This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
>> s2mps11 clock driver.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
>> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>
> Taken into clk-next.

Oops. Please disregard. My auto patch application script sent his by
accident. I have not applied this patches, as indicated in my previous
mail were I gave out an Ack.

Regards,
Mike

>
> Regards,
> Mike
>
>> ---
>>  drivers/clk/Kconfig       |    8 +++---
>>  drivers/clk/clk-s2mps11.c |   61 ++++++++++++++++++++++++++++++++++-----------
>>  2 files changed, 50 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 6f56d3a4f010..8f9ce8ba036d 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -65,12 +65,12 @@ config COMMON_CLK_SI570
>>           clock generators.
>>
>>  config COMMON_CLK_S2MPS11
>> -       tristate "Clock driver for S2MPS11/S5M8767 MFD"
>> +       tristate "Clock driver for S2MPS1X/S5M8767 MFD"
>>         depends on MFD_SEC_CORE
>>         ---help---
>> -         This driver supports S2MPS11/S5M8767 crystal oscillator clock. These
>> -         multi-function devices have 3 fixed-rate oscillators, clocked at
>> -         32KHz each.
>> +         This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
>> +         clock. These multi-function devices have two (S2MPS14) or three
>> +         (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
>>
>>  config CLK_TWL6040
>>         tristate "External McPDM functional clock from twl6040"
>> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
>> index 508875535e1e..8dafb552274f 100644
>> --- a/drivers/clk/clk-s2mps11.c
>> +++ b/drivers/clk/clk-s2mps11.c
>> @@ -1,7 +1,7 @@
>>  /*
>>   * clk-s2mps11.c - Clock driver for S2MPS11.
>>   *
>> - * Copyright (C) 2013 Samsung Electornics
>> + * Copyright (C) 2013,2014 Samsung Electornics
>>   *
>>   * This program is free software; you can redistribute  it and/or modify it
>>   * under  the terms of  the GNU General  Public License as published by the
>> @@ -13,10 +13,6 @@
>>   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>   * GNU General Public License for more details.
>>   *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
>> - *
>>   */
>>
>>  #include <linux/module.h>
>> @@ -27,6 +23,7 @@
>>  #include <linux/clk-provider.h>
>>  #include <linux/platform_device.h>
>>  #include <linux/mfd/samsung/s2mps11.h>
>> +#include <linux/mfd/samsung/s2mps14.h>
>>  #include <linux/mfd/samsung/s5m8767.h>
>>  #include <linux/mfd/samsung/core.h>
>>
>> @@ -125,7 +122,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
>>         },
>>  };
>>
>> -static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
>> +static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
>> +       [S2MPS11_CLK_AP] = {
>> +               .name = "s2mps14_ap",
>> +               .ops = &s2mps11_clk_ops,
>> +               .flags = CLK_IS_ROOT,
>> +       },
>> +       [S2MPS11_CLK_BT] = {
>> +               .name = "s2mps14_bt",
>> +               .ops = &s2mps11_clk_ops,
>> +               .flags = CLK_IS_ROOT,
>> +       },
>> +};
>> +
>> +static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
>> +               struct clk_init_data *clks_init)
>>  {
>>         struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
>>         struct device_node *clk_np;
>> @@ -145,9 +156,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
>>         if (!clk_table)
>>                 return ERR_PTR(-ENOMEM);
>>
>> -       for (i = 0; i < S2MPS11_CLKS_NUM; i++)
>> +       for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
>> +               if (!clks_init[i].name)
>> +                       continue; /* Skip clocks not present in some devices */
>>                 of_property_read_string_index(clk_np, "clock-output-names", i,
>> -                               &s2mps11_clks_init[i].name);
>> +                               &clks_init[i].name);
>> +       }
>>
>>         return clk_np;
>>  }
>> @@ -158,6 +172,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>>         struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
>>         struct device_node *clk_np = NULL;
>>         unsigned int s2mps11_reg;
>> +       struct clk_init_data *clks_init;
>>         int i, ret = 0;
>>         u32 val;
>>
>> @@ -168,25 +183,33 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>>
>>         s2mps11_clk = s2mps11_clks;
>>
>> -       clk_np = s2mps11_clk_parse_dt(pdev);
>> -       if (IS_ERR(clk_np))
>> -               return PTR_ERR(clk_np);
>> -
>>         switch (platform_get_device_id(pdev)->driver_data) {
>>         case S2MPS11X:
>>                 s2mps11_reg = S2MPS11_REG_RTC_CTRL;
>> +               clks_init = s2mps11_clks_init;
>> +               break;
>> +       case S2MPS14X:
>> +               s2mps11_reg = S2MPS14_REG_RTCCTRL;
>> +               clks_init = s2mps14_clks_init;
>>                 break;
>>         case S5M8767X:
>>                 s2mps11_reg = S5M8767_REG_CTRL1;
>> +               clks_init = s2mps11_clks_init;
>>                 break;
>>         default:
>>                 dev_err(&pdev->dev, "Invalid device type\n");
>>                 return -EINVAL;
>>         };
>>
>> +       clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
>> +       if (IS_ERR(clk_np))
>> +               return PTR_ERR(clk_np);
>> +
>>         for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
>> +               if (!clks_init[i].name)
>> +                       continue; /* Skip clocks not present in some devices */
>>                 s2mps11_clk->iodev = iodev;
>> -               s2mps11_clk->hw.init = &s2mps11_clks_init[i];
>> +               s2mps11_clk->hw.init = &clks_init[i];
>>                 s2mps11_clk->mask = 1 << i;
>>                 s2mps11_clk->reg = s2mps11_reg;
>>
>> @@ -220,8 +243,12 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>>         }
>>
>>         if (clk_table) {
>> -               for (i = 0; i < S2MPS11_CLKS_NUM; i++)
>> +               for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
>> +                       /* Skip clocks not present on S2MPS14 */
>> +                       if (!clks_init[i].name)
>> +                               continue;
>>                         clk_table[i] = s2mps11_clks[i].clk;
>> +               }
>>
>>                 clk_data.clks = clk_table;
>>                 clk_data.clk_num = S2MPS11_CLKS_NUM;
>> @@ -250,14 +277,18 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
>>         struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev);
>>         int i;
>>
>> -       for (i = 0; i < S2MPS11_CLKS_NUM; i++)
>> +       for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
>> +               if (!s2mps11_clks[i].lookup)
>> +                       continue; /* Skip clocks not present in some devices */
>>                 clkdev_drop(s2mps11_clks[i].lookup);
>> +       }
>>
>>         return 0;
>>  }
>>
>>  static const struct platform_device_id s2mps11_clk_id[] = {
>>         { "s2mps11-clk", S2MPS11X},
>> +       { "s2mps14-clk", S2MPS14X},
>>         { "s5m8767-clk", S5M8767X},
>>         { },
>>  };
>> --
>> 1.7.9.5
>>

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Krzysztof Kozlowski]

On Tue, 2014-03-18 at 17:16 -0700, Mike Turquette wrote:
> Quoting Krzysztof Kozlowski (2014-03-17 02:19:16)
> > This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> > s2mps11 clock driver.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> > Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> 
> This does not apply cleanly to to clk tree trip, nor does it compile
> after manually merging due to changes introducing
> linux/mfd/samsung/s2mps14.h.
> 
> The changes look OK to me so maybe Lee can take it with my Ack?
> 
> Acked-by: Mike Turquette <mturquette@linaro.org>
> 

Hi,

Thanks for the Ack. The patch depends on Tushar Behera's patches:
 - [PATCH V2 0/2] Add support for clocks in S5M8767
   http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27264
which are waiting for some time. Both patchsets should be pulled
together.

Best regards,
Krzysztof

Re: [PATCH v3 2/3] mfd: sec-core: Add of_compatible strings for clock MFD cells

[Krzysztof Kozlowski]

On Tue, 2014-03-18 at 20:31 +0000, Lee Jones wrote:
> > Add of_compatible strings for S5M8767 and S2MPS14 clock MFD cells.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > ---
> >  drivers/mfd/sec-core.c |    3 +++
> >  1 file changed, 3 insertions(+)
> 
> Applied with Tomasz' Reviewed-by.

Thanks! One minor thing - I see that Tomasz' Review-by got lost when the
patch was applied to your tree:
https://git.kernel.org/cgit/linux/kernel/git/lee/mfd.git/commit/?h=for-mfd-next&id=09f8c0a07044bb8ac5085fcbcf82468173a1666d.

Best regards,
Krzysztof

Re: [PATCH v3 2/3] mfd: sec-core: Add of_compatible strings for clock MFD cells

[Lee Jones]

> > > Add of_compatible strings for S5M8767 and S2MPS14 clock MFD cells.
> > > 
> > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > ---
> > >  drivers/mfd/sec-core.c |    3 +++
> > >  1 file changed, 3 insertions(+)
> > 
> > Applied with Tomasz' Reviewed-by.
> 
> Thanks! One minor thing - I see that Tomasz' Review-by got lost when the
> patch was applied to your tree:
> https://git.kernel.org/cgit/linux/kernel/git/lee/mfd.git/commit/?h=for-mfd-next&id=09f8c0a07044bb8ac5085fcbcf82468173a1666d.

Thanks for the prod, but I do have it applied locally. I'll push the
branch later today.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Krzysztof Kozlowski]

On Wed, 2014-03-19 at 12:11 -0700, Mike Turquette wrote:
> Quoting Krzysztof Kozlowski (2014-03-19 00:50:08)
> > On Tue, 2014-03-18 at 17:16 -0700, Mike Turquette wrote:
> > > Quoting Krzysztof Kozlowski (2014-03-17 02:19:16)
> > > > This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> > > > s2mps11 clock driver.
> > > > 
> > > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > > Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> > > > Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> > > 
> > > This does not apply cleanly to to clk tree trip, nor does it compile
> > > after manually merging due to changes introducing
> > > linux/mfd/samsung/s2mps14.h.
> > > 
> > > The changes look OK to me so maybe Lee can take it with my Ack?
> > > 
> > > Acked-by: Mike Turquette <mturquette@linaro.org>
> > > 
> > 
> > Hi,
> > 
> > Thanks for the Ack. The patch depends on Tushar Behera's patches:
> >  - [PATCH V2 0/2] Add support for clocks in S5M8767
> >    http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27264
> > which are waiting for some time. Both patchsets should be pulled
> > together.
> 
> I took those patches in yesterday. So we have three options:

Great! Thanks.

> 
> 1) MFD tree can pull a stable commit from the clk tree. I'm happy to
> make a topic branch for this. Then these patches can be applied.
> 
> 2) clk tree can pull a stable commit from the mfd tree if the mfd folks
> can provide one.
> 
> 3) Wait until after the merge window to apply this one to the clk tree.
> I don't currently plan to send 2 PRs during the merge window, so this
> could either go in 3.16 or maybe into 3.15 if a split PR is sent.

Dear Lee,

How do you wish to proceed? The patchset depends on changes in sec-core
MFD driver.

Best regards,
Krzysztof

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Lee Jones]

> > > > > This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> > > > > s2mps11 clock driver.
> > > > > 
> > > > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > > > Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> > > > > Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> > > > 
> > > > This does not apply cleanly to to clk tree trip, nor does it compile
> > > > after manually merging due to changes introducing
> > > > linux/mfd/samsung/s2mps14.h.
> > > > 
> > > > The changes look OK to me so maybe Lee can take it with my Ack?
> > > > 
> > > > Acked-by: Mike Turquette <mturquette@linaro.org>
> > > > 
> > > 
> > > Hi,
> > > 
> > > Thanks for the Ack. The patch depends on Tushar Behera's patches:
> > >  - [PATCH V2 0/2] Add support for clocks in S5M8767
> > >    http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27264
> > > which are waiting for some time. Both patchsets should be pulled
> > > together.
> > 
> > I took those patches in yesterday. So we have three options:
> 
> Great! Thanks.
> 
> > 
> > 1) MFD tree can pull a stable commit from the clk tree. I'm happy to
> > make a topic branch for this. Then these patches can be applied.
> > 
> > 2) clk tree can pull a stable commit from the mfd tree if the mfd folks
> > can provide one.
> > 
> > 3) Wait until after the merge window to apply this one to the clk tree.
> > I don't currently plan to send 2 PRs during the merge window, so this
> > could either go in 3.16 or maybe into 3.15 if a split PR is sent.
> 
> Dear Lee,
> 
> How do you wish to proceed? The patchset depends on changes in sec-core
> MFD driver.

The MFD tree is betting pretty complicated with sec-core stuff at the
minuite. Can I vote for option 3?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 1/3] clk: s2mps11: Add support for S2MPS14 clocks

[Mike Turquette]

Quoting Lee Jones (2014-03-20 06:42:19)
> > > > > > This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> > > > > > s2mps11 clock driver.
> > > > > > 
> > > > > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > > > > Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> > > > > > Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> > > > > 
> > > > > This does not apply cleanly to to clk tree trip, nor does it compile
> > > > > after manually merging due to changes introducing
> > > > > linux/mfd/samsung/s2mps14.h.
> > > > > 
> > > > > The changes look OK to me so maybe Lee can take it with my Ack?
> > > > > 
> > > > > Acked-by: Mike Turquette <mturquette@linaro.org>
> > > > > 
> > > > 
> > > > Hi,
> > > > 
> > > > Thanks for the Ack. The patch depends on Tushar Behera's patches:
> > > >  - [PATCH V2 0/2] Add support for clocks in S5M8767
> > > >    http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27264
> > > > which are waiting for some time. Both patchsets should be pulled
> > > > together.
> > > 
> > > I took those patches in yesterday. So we have three options:
> > 
> > Great! Thanks.
> > 
> > > 
> > > 1) MFD tree can pull a stable commit from the clk tree. I'm happy to
> > > make a topic branch for this. Then these patches can be applied.
> > > 
> > > 2) clk tree can pull a stable commit from the mfd tree if the mfd folks
> > > can provide one.
> > > 
> > > 3) Wait until after the merge window to apply this one to the clk tree.
> > > I don't currently plan to send 2 PRs during the merge window, so this
> > > could either go in 3.16 or maybe into 3.15 if a split PR is sent.
> > 
> > Dear Lee,
> > 
> > How do you wish to proceed? The patchset depends on changes in sec-core
> > MFD driver.
> 
> The MFD tree is betting pretty complicated with sec-core stuff at the
> minuite. Can I vote for option 3?

Sure. clock tree feels the same way. ;-)

Regards,
Mike

> 
> -- 
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog