[PATCH v2 0/6] arm64: Add audit support

[PATCH v2 0/6] arm64: Add audit support

[AKASHI Takahiro]

This patchset adds system call audit support on arm64.
Both 32-bit (AUIDT_ARCH_ARM[EB]) and 64-bit tasks (AUDIT_ARCH_AARCH64[EB])
are supported, but presuming 32-LE on 64-LE or 32-BE on 64-BE.

There are some prerequisites for this patch to work correctly:
* "generic compat system call audit support" patch
* "correct a type mismatch in audit_syscall_exit()" patch
   (already accepted and queued in 3.14)
* "Modify a set of system calls in audit class" patch
* userspace audit tool (v2.3.2 + my patch for arm64)

All those were already or will be soon posted separately.
Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".


AKASHI Takahiro (6):
  audit: Enable arm64 support
  arm64: Add regs_return_value() in syscall.h
  arm64: Add audit support
  arm64: audit: Add 32-bit (compat) syscall support
  arm64: audit: Add makefile rule to create unistd_32.h for compat
    syscalls
  arm64: audit: Add audit hook in ptrace/syscall_trace

 arch/arm64/Makefile                  |    4 ++++
 arch/arm64/include/asm/audit.h       |   20 ++++++++++++++++++++
 arch/arm64/include/asm/ptrace.h      |    5 +++++
 arch/arm64/include/asm/syscall.h     |   22 ++++++++++++++++++++++
 arch/arm64/include/asm/thread_info.h |    1 +
 arch/arm64/kernel/entry.S            |    3 +++
 arch/arm64/kernel/ptrace.c           |   12 ++++++++++++
 arch/arm64/kernel/syscalls/Makefile  |   20 ++++++++++++++++++++
 include/uapi/linux/audit.h           |    2 ++
 init/Kconfig                         |    2 +-
 10 files changed, 90 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/include/asm/audit.h
 create mode 100644 arch/arm64/kernel/syscalls/Makefile

-- 
1.7.9.5

[PATCH v2 1/6] audit: Enable arm64 support

[AKASHI Takahiro]

This patch adds AUDIT_ARCH_* identifiers for arm64(AArch64), and
makes CONFIG_AUDITSYSCALL selectable.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 include/uapi/linux/audit.h |    2 ++
 init/Kconfig               |    2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 44b05a0..e39635b 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -327,6 +327,8 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
diff --git a/init/Kconfig b/init/Kconfig
index 79383d3..3aae602 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -284,7 +284,7 @@ config AUDIT
 
 config AUDITSYSCALL
 	bool "Enable system-call auditing support"
-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
+	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
 	default y if SECURITY_SELINUX
 	help
 	  Enable low-overhead system-call auditing infrastructure that
-- 
1.7.9.5

Re: [PATCH v2 1/6] audit: Enable arm64 support

[Catalin Marinas]

On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
> --- a/include/uapi/linux/audit.h
> +++ b/include/uapi/linux/audit.h
> @@ -327,6 +327,8 @@ enum {
>  /* distinguish syscall tables */
>  #define __AUDIT_ARCH_64BIT 0x80000000
>  #define __AUDIT_ARCH_LE	   0x40000000
> +#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> +#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
>  #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>  #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
>  #define AUDIT_ARCH_ARMEB	(EM_ARM)
> diff --git a/init/Kconfig b/init/Kconfig
> index 79383d3..3aae602 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -284,7 +284,7 @@ config AUDIT
>  
>  config AUDITSYSCALL
>  	bool "Enable system-call auditing support"
> -	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
> +	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)

The usual comment for such changes: could you please clean this up and
just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?

-- 
Catalin

Re: [PATCH v2 1/6] audit: Enable arm64 support

[AKASHI Takahiro]

[To audit maintainers]

On 01/23/2014 11:18 PM, Catalin Marinas wrote:
> On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
>> --- a/include/uapi/linux/audit.h
>> +++ b/include/uapi/linux/audit.h
>> @@ -327,6 +327,8 @@ enum {
>>   /* distinguish syscall tables */
>>   #define __AUDIT_ARCH_64BIT 0x80000000
>>   #define __AUDIT_ARCH_LE	   0x40000000
>> +#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>> +#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
>>   #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>>   #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
>>   #define AUDIT_ARCH_ARMEB	(EM_ARM)
>> diff --git a/init/Kconfig b/init/Kconfig
>> index 79383d3..3aae602 100644
>> --- a/init/Kconfig
>> +++ b/init/Kconfig
>> @@ -284,7 +284,7 @@ config AUDIT
>>
>>   config AUDITSYSCALL
>>   	bool "Enable system-call auditing support"
>> -	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
>> +	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
>
> The usual comment for such changes: could you please clean this up and
> just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?

Do you agree to this change?

If so, I can create a patch, but have some concerns:
1) I can't verify it on other architectures than (arm &) arm64.
2) Some architectures (microblaze, mips, openrisc) are not listed here, but
    their ptrace.c have a call to audit_syscall_entry/exit().
    (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)
So I'm afraid that the change might break someone's assumption.

Thanks,
-Takahiro AKASHI

Re: [PATCH v2 1/6] audit: Enable arm64 support

[Catalin Marinas]

On Mon, Jan 27, 2014 at 05:12:33AM +0000, AKASHI Takahiro wrote:
> [To audit maintainers]
> 
> On 01/23/2014 11:18 PM, Catalin Marinas wrote:
> > On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
> >> --- a/include/uapi/linux/audit.h
> >> +++ b/include/uapi/linux/audit.h
> >> @@ -327,6 +327,8 @@ enum {
> >>   /* distinguish syscall tables */
> >>   #define __AUDIT_ARCH_64BIT 0x80000000
> >>   #define __AUDIT_ARCH_LE	   0x40000000
> >> +#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> >> +#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
> >>   #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> >>   #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
> >>   #define AUDIT_ARCH_ARMEB	(EM_ARM)
> >> diff --git a/init/Kconfig b/init/Kconfig
> >> index 79383d3..3aae602 100644
> >> --- a/init/Kconfig
> >> +++ b/init/Kconfig
> >> @@ -284,7 +284,7 @@ config AUDIT
> >>
> >>   config AUDITSYSCALL
> >>   	bool "Enable system-call auditing support"
> >> -	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
> >> +	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
> >
> > The usual comment for such changes: could you please clean this up and
> > just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?
> 
> Do you agree to this change?
> 
> If so, I can create a patch, but have some concerns:
> 1) I can't verify it on other architectures than (arm &) arm64.

You could try to build. It's really a trivial change, could get away
with code inspection (and some automatic building when it gets to
linux-next).

In init/Kconfig:

config HAVE_ARCH_AUDITSYSCALL
	bool

and:

-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
+	depends on HAVE_ARCH_AUDITSYSCALL

In the corresponding arch/*/Kconfig:

	select HAVE_ARCH_AUDITSYSCALL

> 2) Some architectures (microblaze, mips, openrisc) are not listed here, but

For those, you don't need to select HAVE_ARCH_AUDITSYSCALL.

>     their ptrace.c have a call to audit_syscall_entry/exit().
>     (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)


They are not NULL but empty inline functions, so they don't have any
effect.

> So I'm afraid that the change might break someone's assumption.

I'm pretty sure it won't ;).

-- 
Catalin

Re: [PATCH v2 1/6] audit: Enable arm64 support

[Richard Guy Briggs]

On 14/01/27, AKASHI Takahiro wrote:
> [To audit maintainers]
> 
> On 01/23/2014 11:18 PM, Catalin Marinas wrote:
> >On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
> >>--- a/include/uapi/linux/audit.h
> >>+++ b/include/uapi/linux/audit.h
> >>@@ -327,6 +327,8 @@ enum {
> >>  /* distinguish syscall tables */
> >>  #define __AUDIT_ARCH_64BIT 0x80000000
> >>  #define __AUDIT_ARCH_LE	   0x40000000
> >>+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> >>+#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
> >>  #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> >>  #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
> >>  #define AUDIT_ARCH_ARMEB	(EM_ARM)
> >>diff --git a/init/Kconfig b/init/Kconfig
> >>index 79383d3..3aae602 100644
> >>--- a/init/Kconfig
> >>+++ b/init/Kconfig
> >>@@ -284,7 +284,7 @@ config AUDIT
> >>
> >>  config AUDITSYSCALL
> >>  	bool "Enable system-call auditing support"
> >>-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
> >>+	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
> >
> >The usual comment for such changes: could you please clean this up and
> >just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?
> 
> Do you agree to this change?
> 
> If so, I can create a patch, but have some concerns:
> 1) I can't verify it on other architectures than (arm &) arm64.
> 2) Some architectures (microblaze, mips, openrisc) are not listed here, but
>    their ptrace.c have a call to audit_syscall_entry/exit().
>    (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)

I can try: ppc s390 x86_64 ppc64 i686 s390x

> So I'm afraid that the change might break someone's assumption.
> 
> Thanks,
> -Takahiro AKASHI

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v2 1/6] audit: Enable arm64 support

[Richard Guy Briggs]

On 14/01/29, Richard Guy Briggs wrote:
> On 14/01/27, AKASHI Takahiro wrote:
> > [To audit maintainers]
> > 
> > On 01/23/2014 11:18 PM, Catalin Marinas wrote:
> > >On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
> > >>--- a/include/uapi/linux/audit.h
> > >>+++ b/include/uapi/linux/audit.h
> > >>@@ -327,6 +327,8 @@ enum {
> > >>  /* distinguish syscall tables */
> > >>  #define __AUDIT_ARCH_64BIT 0x80000000
> > >>  #define __AUDIT_ARCH_LE	   0x40000000
> > >>+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> > >>+#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
> > >>  #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> > >>  #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
> > >>  #define AUDIT_ARCH_ARMEB	(EM_ARM)
> > >>diff --git a/init/Kconfig b/init/Kconfig
> > >>index 79383d3..3aae602 100644
> > >>--- a/init/Kconfig
> > >>+++ b/init/Kconfig
> > >>@@ -284,7 +284,7 @@ config AUDIT
> > >>
> > >>  config AUDITSYSCALL
> > >>  	bool "Enable system-call auditing support"
> > >>-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
> > >>+	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
> > >
> > >The usual comment for such changes: could you please clean this up and
> > >just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?
> > 
> > Do you agree to this change?
> > 
> > If so, I can create a patch, but have some concerns:
> > 1) I can't verify it on other architectures than (arm &) arm64.
> > 2) Some architectures (microblaze, mips, openrisc) are not listed here, but
> >    their ptrace.c have a call to audit_syscall_entry/exit().
> >    (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)
> 
> I can try: ppc s390 x86_64 ppc64 i686 s390x

These arches above all pass compile and basic tests with the following patches applied:

	audit: correct a type mismatch in audit_syscall_exit() pending (already upstream)

	audit: Modify a set of system calls in audit class definitions (already upstream)

	[PATCH v3] audit: Add generic compat syscall support

	[PATCH v2] audit: Enable arm64 support
	[PATCH v2] arm64: Add regs_return_value() in syscall.h
	[PATCH v2] arm64: Add audit support
	[PATCH v2] arm64: audit: Add 32-bit (compat) syscall support
	[PATCH v2] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls
	[PATCH v2] arm64: audit: Add audit hook in ptrace/syscall_trace

> > So I'm afraid that the change might break someone's assumption.
> > 
> > Thanks,
> > -Takahiro AKASHI
> 
> - RGB

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v2 1/6] audit: Enable arm64 support

[AKASHI Takahiro]

Richard,

On 01/30/2014 07:36 AM, Richard Guy Briggs wrote:
> On 14/01/29, Richard Guy Briggs wrote:
>> On 14/01/27, AKASHI Takahiro wrote:
>>> [To audit maintainers]
>>>
>>> On 01/23/2014 11:18 PM, Catalin Marinas wrote:
>>>> On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
>>>>> --- a/include/uapi/linux/audit.h
>>>>> +++ b/include/uapi/linux/audit.h
>>>>> @@ -327,6 +327,8 @@ enum {
>>>>>   /* distinguish syscall tables */
>>>>>   #define __AUDIT_ARCH_64BIT 0x80000000
>>>>>   #define __AUDIT_ARCH_LE	   0x40000000
>>>>> +#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>>>>> +#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
>>>>>   #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>>>>>   #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
>>>>>   #define AUDIT_ARCH_ARMEB	(EM_ARM)
>>>>> diff --git a/init/Kconfig b/init/Kconfig
>>>>> index 79383d3..3aae602 100644
>>>>> --- a/init/Kconfig
>>>>> +++ b/init/Kconfig
>>>>> @@ -284,7 +284,7 @@ config AUDIT
>>>>>
>>>>>   config AUDITSYSCALL
>>>>>   	bool "Enable system-call auditing support"
>>>>> -	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
>>>>> +	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
>>>>
>>>> The usual comment for such changes: could you please clean this up and
>>>> just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?
>>>
>>> Do you agree to this change?
>>>
>>> If so, I can create a patch, but have some concerns:
>>> 1) I can't verify it on other architectures than (arm &) arm64.
>>> 2) Some architectures (microblaze, mips, openrisc) are not listed here, but
>>>     their ptrace.c have a call to audit_syscall_entry/exit().
>>>     (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)
>>
>> I can try: ppc s390 x86_64 ppc64 i686 s390x
>
> These arches above all pass compile and basic tests with the following patches applied:
>
> 	audit: correct a type mismatch in audit_syscall_exit() pending (already upstream)
>
> 	audit: Modify a set of system calls in audit class definitions (already upstream)
>
> 	[PATCH v3] audit: Add generic compat syscall support
>
> 	[PATCH v2] audit: Enable arm64 support
> 	[PATCH v2] arm64: Add regs_return_value() in syscall.h
> 	[PATCH v2] arm64: Add audit support
> 	[PATCH v2] arm64: audit: Add 32-bit (compat) syscall support
> 	[PATCH v2] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls
> 	[PATCH v2] arm64: audit: Add audit hook in ptrace/syscall_trace

I think that you missed Catalin's suggestion.
Please use the patch I will post after this message and try it again, please?

Thanks,
-Takahiro AKASHI



>>> So I'm afraid that the change might break someone's assumption.
>>>
>>> Thanks,
>>> -Takahiro AKASHI
>>
>> - RGB
>
> - RGB
>
> --
> Richard Guy Briggs <rbriggs@redhat.com>
> Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
> Remote, Ottawa, Canada
> Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545
>

Re: [PATCH v2 1/6] audit: Enable arm64 support

[Richard Guy Briggs]

On 14/02/03, AKASHI Takahiro wrote:
> Richard,

Takahiro,

> On 01/30/2014 07:36 AM, Richard Guy Briggs wrote:
> >On 14/01/29, Richard Guy Briggs wrote:
> >>On 14/01/27, AKASHI Takahiro wrote:
> >>>[To audit maintainers]
> >>>
> >>>On 01/23/2014 11:18 PM, Catalin Marinas wrote:
> >>>>On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
> >>>>>--- a/include/uapi/linux/audit.h
> >>>>>+++ b/include/uapi/linux/audit.h
> >>>>>@@ -327,6 +327,8 @@ enum {
> >>>>>  /* distinguish syscall tables */
> >>>>>  #define __AUDIT_ARCH_64BIT 0x80000000
> >>>>>  #define __AUDIT_ARCH_LE	   0x40000000
> >>>>>+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> >>>>>+#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
> >>>>>  #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> >>>>>  #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
> >>>>>  #define AUDIT_ARCH_ARMEB	(EM_ARM)
> >>>>>diff --git a/init/Kconfig b/init/Kconfig
> >>>>>index 79383d3..3aae602 100644
> >>>>>--- a/init/Kconfig
> >>>>>+++ b/init/Kconfig
> >>>>>@@ -284,7 +284,7 @@ config AUDIT
> >>>>>
> >>>>>  config AUDITSYSCALL
> >>>>>  	bool "Enable system-call auditing support"
> >>>>>-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
> >>>>>+	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
> >>>>
> >>>>The usual comment for such changes: could you please clean this up and
> >>>>just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?
> >>>
> >>>Do you agree to this change?
> >>>
> >>>If so, I can create a patch, but have some concerns:
> >>>1) I can't verify it on other architectures than (arm &) arm64.
> >>>2) Some architectures (microblaze, mips, openrisc) are not listed here, but
> >>>    their ptrace.c have a call to audit_syscall_entry/exit().
> >>>    (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)
> >>
> >>I can try: ppc s390 x86_64 ppc64 i686 s390x
> >
> >These arches above all pass compile and basic tests with the following patches applied:
> >
> >	audit: correct a type mismatch in audit_syscall_exit() pending (already upstream)
> >
> >	audit: Modify a set of system calls in audit class definitions (already upstream)
> >
> >	[PATCH v3] audit: Add generic compat syscall support
> >
> >	[PATCH v2] audit: Enable arm64 support
> >	[PATCH v2] arm64: Add regs_return_value() in syscall.h
> >	[PATCH v2] arm64: Add audit support
> >	[PATCH v2] arm64: audit: Add 32-bit (compat) syscall support
> >	[PATCH v2] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls
> >	[PATCH v2] arm64: audit: Add audit hook in ptrace/syscall_trace
> 
> I think that you missed Catalin's suggestion.

I didn't miss his suggestions.  I think they are a good way to go, but I
wanted to make a test at referrable point in time to validate the work
to that point and to avoid introducing errors by mis-interpreting ideas
that were not yet fully-formed patches.

> Please use the patch I will post after this message and try it again, please?

I was certainly intending to do so.

> Thanks,
> -Takahiro AKASHI
> 
> >>>So I'm afraid that the change might break someone's assumption.
> >>>
> >>>Thanks,
> >>>-Takahiro AKASHI
> >>
> >>- RGB
> >
> >- RGB
> >
> >--
> >Richard Guy Briggs <rbriggs@redhat.com>
> >Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
> >Remote, Ottawa, Canada
> >Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545
> >

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v2 1/6] audit: Enable arm64 support

[Richard Guy Briggs]

On 14/02/03, Richard Guy Briggs wrote:
> On 14/02/03, AKASHI Takahiro wrote:
> > Richard,
> 
> Takahiro,

Takahiro,

> > On 01/30/2014 07:36 AM, Richard Guy Briggs wrote:
> > >On 14/01/29, Richard Guy Briggs wrote:
> > >>On 14/01/27, AKASHI Takahiro wrote:
> > >>>[To audit maintainers]
> > >>>
> > >>>On 01/23/2014 11:18 PM, Catalin Marinas wrote:
> > >>>>On Fri, Jan 17, 2014 at 08:13:14AM +0000, AKASHI Takahiro wrote:
> > >>>>>--- a/include/uapi/linux/audit.h
> > >>>>>+++ b/include/uapi/linux/audit.h
> > >>>>>@@ -327,6 +327,8 @@ enum {
> > >>>>>  /* distinguish syscall tables */
> > >>>>>  #define __AUDIT_ARCH_64BIT 0x80000000
> > >>>>>  #define __AUDIT_ARCH_LE	   0x40000000
> > >>>>>+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> > >>>>>+#define AUDIT_ARCH_AARCH64EB	(EM_AARCH64|__AUDIT_ARCH_64BIT)
> > >>>>>  #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
> > >>>>>  #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
> > >>>>>  #define AUDIT_ARCH_ARMEB	(EM_ARM)
> > >>>>>diff --git a/init/Kconfig b/init/Kconfig
> > >>>>>index 79383d3..3aae602 100644
> > >>>>>--- a/init/Kconfig
> > >>>>>+++ b/init/Kconfig
> > >>>>>@@ -284,7 +284,7 @@ config AUDIT
> > >>>>>
> > >>>>>  config AUDITSYSCALL
> > >>>>>  	bool "Enable system-call auditing support"
> > >>>>>-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
> > >>>>>+	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ARM64)
> > >>>>
> > >>>>The usual comment for such changes: could you please clean this up and
> > >>>>just use something like "depends on HAVE_ARCH_AUDITSYSCALL"?
> > >>>
> > >>>Do you agree to this change?
> > >>>
> > >>>If so, I can create a patch, but have some concerns:
> > >>>1) I can't verify it on other architectures than (arm &) arm64.
> > >>>2) Some architectures (microblaze, mips, openrisc) are not listed here, but
> > >>>    their ptrace.c have a call to audit_syscall_entry/exit().
> > >>>    (audit_syscall_entry/exit are null if !AUDITSYSCALL, though)
> > >>
> > >>I can try: ppc s390 x86_64 ppc64 i686 s390x
> > >
> > >These arches above all pass compile and basic tests with the following patches applied:
> > >
> > >	audit: correct a type mismatch in audit_syscall_exit() pending (already upstream)
> > >
> > >	audit: Modify a set of system calls in audit class definitions (already upstream)
> > >
> > >	[PATCH v3] audit: Add generic compat syscall support
> > >
> > >	[PATCH v2] audit: Enable arm64 support
> > >	[PATCH v2] arm64: Add regs_return_value() in syscall.h
> > >	[PATCH v2] arm64: Add audit support
> > >	[PATCH v2] arm64: audit: Add 32-bit (compat) syscall support
> > >	[PATCH v2] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls
> > >	[PATCH v2] arm64: audit: Add audit hook in ptrace/syscall_trace
> > 
> > I think that you missed Catalin's suggestion.
> 
> I didn't miss his suggestions.  I think they are a good way to go, but I
> wanted to make a test at referrable point in time to validate the work
> to that point and to avoid introducing errors by mis-interpreting ideas
> that were not yet fully-formed patches.
> 
> > Please use the patch I will post after this message and try it again, please?
> 
> I was certainly intending to do so.

I have tested the new sets from Catalin and you and everything passes ok.

> > Thanks,
> > -Takahiro AKASHI
> > 
> > >>>So I'm afraid that the change might break someone's assumption.
> > >>>
> > >>>Thanks,
> > >>>-Takahiro AKASHI
> > >>
> > >>- RGB
> > >
> > >- RGB
> 
> - RGB

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

[PATCH] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

[AKASHI Takahiro]

Currently AUDITSYSCALL has a long list of architecture depencency:
       depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
		SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
for simplicity.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm/Kconfig       |    1 +
 arch/ia64/Kconfig      |    1 +
 arch/parisc/Kconfig    |    1 +
 arch/powerpc/Kconfig   |    1 +
 arch/s390/Kconfig      |    1 +
 arch/sh/Kconfig        |    1 +
 arch/sparc/Kconfig     |    1 +
 arch/um/Kconfig.common |    1 +
 arch/x86/Kconfig       |    1 +
 init/Kconfig           |    5 ++++-
 10 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7e..cf69f89 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -23,6 +23,7 @@ config ARM
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 4e4119b..9143d91 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -43,6 +43,7 @@ config IA64
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAVE_ARCH_AUDITSYSCALL
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b5f1858..0821e83 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -28,6 +28,7 @@ config PARISC
 	select CLONE_BACKWARDS
 	select TTY # Needed for pdc_cons.c
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_ARCH_AUDITSYSCALL
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b44b52c..96627d6 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -139,6 +139,7 @@ config PPC
 	select OLD_SIGACTION if PPC32
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_ARCH_AUDITSYSCALL
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1e1a03d..b3b9853 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -103,6 +103,7 @@ config S390
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9b0979f..675fb7c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -42,6 +42,7 @@ config SUPERH
 	select MODULES_USE_ELF_RELA
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION
+	select HAVE_ARCH_AUDITSYSCALL
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index d4f7a6a..7f7ad7e 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -76,6 +76,7 @@ config SPARC64
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select HAVE_C_RECORDMCOUNT
 	select NO_BOOTMEM
+	select HAVE_ARCH_AUDITSYSCALL
 
 config ARCH_DEFCONFIG
 	string
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 21ca44c..6915d28 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -1,6 +1,7 @@
 config UML
 	bool
 	default y
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_UID16
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e903c71..6ef682f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -124,6 +124,7 @@ config X86
 	select RTC_LIB
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
+	select HAVE_ARCH_AUDITSYSCALL
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/init/Kconfig b/init/Kconfig
index 79383d3..9fe22d2 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -282,9 +282,12 @@ config AUDIT
 	  logging of avc messages output).  Does not do system-call
 	  auditing without CONFIG_AUDITSYSCALL.
 
+config HAVE_ARCH_AUDITSYSCALL
+	bool
+
 config AUDITSYSCALL
 	bool "Enable system-call auditing support"
-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
+	depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
 	default y if SECURITY_SELINUX
 	help
 	  Enable low-overhead system-call auditing infrastructure that
-- 
1.7.9.5

[PATCH v2 0/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

[AKASHI Takahiro]

Currently AUDITSYSCALL has a long list of architecture depencency:
       depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
                SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
for simplicity.

Changes v1 -> v2:
* rebased to 3.14-rcX, and so added a change on ALPHA

AKASHI Takahiro (1):
  audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

 arch/alpha/Kconfig     |    1 +
 arch/arm/Kconfig       |    1 +
 arch/ia64/Kconfig      |    1 +
 arch/parisc/Kconfig    |    1 +
 arch/powerpc/Kconfig   |    1 +
 arch/s390/Kconfig      |    1 +
 arch/sh/Kconfig        |    1 +
 arch/sparc/Kconfig     |    1 +
 arch/um/Kconfig.common |    1 +
 arch/x86/Kconfig       |    1 +
 init/Kconfig           |    5 ++++-
 11 files changed, 14 insertions(+), 1 deletion(-)

-- 
1.7.9.5

[PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

[AKASHI Takahiro]

Currently AUDITSYSCALL has a long list of architecture depencency:
       depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
		SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
for simplicity.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/alpha/Kconfig     |    1 +
 arch/arm/Kconfig       |    1 +
 arch/ia64/Kconfig      |    1 +
 arch/parisc/Kconfig    |    1 +
 arch/powerpc/Kconfig   |    1 +
 arch/s390/Kconfig      |    1 +
 arch/sh/Kconfig        |    1 +
 arch/sparc/Kconfig     |    1 +
 arch/um/Kconfig.common |    1 +
 arch/x86/Kconfig       |    1 +
 init/Kconfig           |    5 ++++-
 11 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index f6c6b34..b7ff9a3 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -22,6 +22,7 @@ config ALPHA
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e254198..ca79340 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -24,6 +24,7 @@ config ARM
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 0c8e553..5409bf4 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -44,6 +44,7 @@ config IA64
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAVE_ARCH_AUDITSYSCALL
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index bb2a8ec..1faefed 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -28,6 +28,7 @@ config PARISC
 	select CLONE_BACKWARDS
 	select TTY # Needed for pdc_cons.c
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_ARCH_AUDITSYSCALL
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 957bf34..7b3b8fe 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -141,6 +141,7 @@ config PPC
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select ARCH_USE_CMPXCHG_LOCKREF if PPC64
+	select HAVE_ARCH_AUDITSYSCALL
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 65a0775..1b58568 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -103,6 +103,7 @@ config S390
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6357710..4addd87 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -42,6 +42,7 @@ config SUPERH
 	select MODULES_USE_ELF_RELA
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION
+	select HAVE_ARCH_AUDITSYSCALL
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index c51efdc..9c74d6b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -77,6 +77,7 @@ config SPARC64
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select HAVE_C_RECORDMCOUNT
 	select NO_BOOTMEM
+	select HAVE_ARCH_AUDITSYSCALL
 
 config ARCH_DEFCONFIG
 	string
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 21ca44c..6915d28 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -1,6 +1,7 @@
 config UML
 	bool
 	default y
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_UID16
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0af5250..2938365 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -127,6 +127,7 @@ config X86
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
 	select HAVE_CC_STACKPROTECTOR
+	select HAVE_ARCH_AUDITSYSCALL
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/init/Kconfig b/init/Kconfig
index 009a797..d4ec53d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -282,9 +282,12 @@ config AUDIT
 	  logging of avc messages output).  Does not do system-call
 	  auditing without CONFIG_AUDITSYSCALL.
 
+config HAVE_ARCH_AUDITSYSCALL
+	bool
+
 config AUDITSYSCALL
 	bool "Enable system-call auditing support"
-	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
+	depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
 	default y if SECURITY_SELINUX
 	help
 	  Enable low-overhead system-call auditing infrastructure that
-- 
1.7.9.5

Re: [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

[Richard Guy Briggs]

On 14/02/25, AKASHI Takahiro wrote:
> Currently AUDITSYSCALL has a long list of architecture depencency:
>        depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
> 		SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
> The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
> for simplicity.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Acked-by: Richard Guy Briggs <rgb@redhat.com>

> ---
>  arch/alpha/Kconfig     |    1 +
>  arch/arm/Kconfig       |    1 +
>  arch/ia64/Kconfig      |    1 +
>  arch/parisc/Kconfig    |    1 +
>  arch/powerpc/Kconfig   |    1 +
>  arch/s390/Kconfig      |    1 +
>  arch/sh/Kconfig        |    1 +
>  arch/sparc/Kconfig     |    1 +
>  arch/um/Kconfig.common |    1 +
>  arch/x86/Kconfig       |    1 +
>  init/Kconfig           |    5 ++++-
>  11 files changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
> index f6c6b34..b7ff9a3 100644
> --- a/arch/alpha/Kconfig
> +++ b/arch/alpha/Kconfig
> @@ -22,6 +22,7 @@ config ALPHA
>  	select GENERIC_SMP_IDLE_THREAD
>  	select GENERIC_STRNCPY_FROM_USER
>  	select GENERIC_STRNLEN_USER
> +	select HAVE_ARCH_AUDITSYSCALL
>  	select HAVE_MOD_ARCH_SPECIFIC
>  	select MODULES_USE_ELF_RELA
>  	select ODD_RT_SIGACTION
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index e254198..ca79340 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -24,6 +24,7 @@ config ARM
>  	select GENERIC_STRNCPY_FROM_USER
>  	select GENERIC_STRNLEN_USER
>  	select HARDIRQS_SW_RESEND
> +	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
>  	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
>  	select HAVE_ARCH_KGDB
>  	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> index 0c8e553..5409bf4 100644
> --- a/arch/ia64/Kconfig
> +++ b/arch/ia64/Kconfig
> @@ -44,6 +44,7 @@ config IA64
>  	select HAVE_MOD_ARCH_SPECIFIC
>  	select MODULES_USE_ELF_RELA
>  	select ARCH_USE_CMPXCHG_LOCKREF
> +	select HAVE_ARCH_AUDITSYSCALL
>  	default y
>  	help
>  	  The Itanium Processor Family is Intel's 64-bit successor to
> diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
> index bb2a8ec..1faefed 100644
> --- a/arch/parisc/Kconfig
> +++ b/arch/parisc/Kconfig
> @@ -28,6 +28,7 @@ config PARISC
>  	select CLONE_BACKWARDS
>  	select TTY # Needed for pdc_cons.c
>  	select HAVE_DEBUG_STACKOVERFLOW
> +	select HAVE_ARCH_AUDITSYSCALL
>  
>  	help
>  	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 957bf34..7b3b8fe 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -141,6 +141,7 @@ config PPC
>  	select HAVE_DEBUG_STACKOVERFLOW
>  	select HAVE_IRQ_EXIT_ON_IRQ_STACK
>  	select ARCH_USE_CMPXCHG_LOCKREF if PPC64
> +	select HAVE_ARCH_AUDITSYSCALL
>  
>  config GENERIC_CSUM
>  	def_bool CPU_LITTLE_ENDIAN
> diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
> index 65a0775..1b58568 100644
> --- a/arch/s390/Kconfig
> +++ b/arch/s390/Kconfig
> @@ -103,6 +103,7 @@ config S390
>  	select GENERIC_SMP_IDLE_THREAD
>  	select GENERIC_TIME_VSYSCALL
>  	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
> +	select HAVE_ARCH_AUDITSYSCALL
>  	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
>  	select HAVE_ARCH_SECCOMP_FILTER
>  	select HAVE_ARCH_TRACEHOOK
> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
> index 6357710..4addd87 100644
> --- a/arch/sh/Kconfig
> +++ b/arch/sh/Kconfig
> @@ -42,6 +42,7 @@ config SUPERH
>  	select MODULES_USE_ELF_RELA
>  	select OLD_SIGSUSPEND
>  	select OLD_SIGACTION
> +	select HAVE_ARCH_AUDITSYSCALL
>  	help
>  	  The SuperH is a RISC processor targeted for use in embedded systems
>  	  and consumer electronics; it was also used in the Sega Dreamcast
> diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
> index c51efdc..9c74d6b 100644
> --- a/arch/sparc/Kconfig
> +++ b/arch/sparc/Kconfig
> @@ -77,6 +77,7 @@ config SPARC64
>  	select ARCH_HAVE_NMI_SAFE_CMPXCHG
>  	select HAVE_C_RECORDMCOUNT
>  	select NO_BOOTMEM
> +	select HAVE_ARCH_AUDITSYSCALL
>  
>  config ARCH_DEFCONFIG
>  	string
> diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
> index 21ca44c..6915d28 100644
> --- a/arch/um/Kconfig.common
> +++ b/arch/um/Kconfig.common
> @@ -1,6 +1,7 @@
>  config UML
>  	bool
>  	default y
> +	select HAVE_ARCH_AUDITSYSCALL
>  	select HAVE_UID16
>  	select GENERIC_IRQ_SHOW
>  	select GENERIC_CPU_DEVICES
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 0af5250..2938365 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -127,6 +127,7 @@ config X86
>  	select HAVE_DEBUG_STACKOVERFLOW
>  	select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
>  	select HAVE_CC_STACKPROTECTOR
> +	select HAVE_ARCH_AUDITSYSCALL
>  
>  config INSTRUCTION_DECODER
>  	def_bool y
> diff --git a/init/Kconfig b/init/Kconfig
> index 009a797..d4ec53d 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -282,9 +282,12 @@ config AUDIT
>  	  logging of avc messages output).  Does not do system-call
>  	  auditing without CONFIG_AUDITSYSCALL.
>  
> +config HAVE_ARCH_AUDITSYSCALL
> +	bool
> +
>  config AUDITSYSCALL
>  	bool "Enable system-call auditing support"
> -	depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
> +	depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
>  	default y if SECURITY_SELINUX
>  	help
>  	  Enable low-overhead system-call auditing infrastructure that
> -- 
> 1.7.9.5
> 

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

[Matt Turner]

On Tue, Feb 25, 2014 at 1:16 AM, AKASHI Takahiro
<takahiro.akashi@linaro.org> wrote:
> Currently AUDITSYSCALL has a long list of architecture depencency:
>        depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
>                 SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
> The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
> for simplicity.
>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/alpha/Kconfig     |    1 +
>  arch/arm/Kconfig       |    1 +
>  arch/ia64/Kconfig      |    1 +
>  arch/parisc/Kconfig    |    1 +
>  arch/powerpc/Kconfig   |    1 +
>  arch/s390/Kconfig      |    1 +
>  arch/sh/Kconfig        |    1 +
>  arch/sparc/Kconfig     |    1 +
>  arch/um/Kconfig.common |    1 +
>  arch/x86/Kconfig       |    1 +
>  init/Kconfig           |    5 ++++-
>  11 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
> index f6c6b34..b7ff9a3 100644
> --- a/arch/alpha/Kconfig
> +++ b/arch/alpha/Kconfig
> @@ -22,6 +22,7 @@ config ALPHA
>         select GENERIC_SMP_IDLE_THREAD
>         select GENERIC_STRNCPY_FROM_USER
>         select GENERIC_STRNLEN_USER
> +       select HAVE_ARCH_AUDITSYSCALL
>         select HAVE_MOD_ARCH_SPECIFIC
>         select MODULES_USE_ELF_RELA
>         select ODD_RT_SIGACTION

Thanks.

Acked-by: Matt Turner <mattst88@gmail.com>

Re: [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL

[Michael Ellerman]

On Tue, 2014-02-25 at 18:16 +0900, AKASHI Takahiro wrote:
> Currently AUDITSYSCALL has a long list of architecture depencency:
>        depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
> 		SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
> The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
> for simplicity.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 957bf34..7b3b8fe 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -141,6 +141,7 @@ config PPC
>  	select HAVE_DEBUG_STACKOVERFLOW
>  	select HAVE_IRQ_EXIT_ON_IRQ_STACK
>  	select ARCH_USE_CMPXCHG_LOCKREF if PPC64
> +	select HAVE_ARCH_AUDITSYSCALL
>  
>  config GENERIC_CSUM
>  	def_bool CPU_LITTLE_ENDIAN

Looks good for powerpc.

Acked-by: Michael Ellerman <mpe@ellerman.id.au>

cheers

[PATCH v2 2/6] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro is used mainly for audit to record system call's results, but
may also be used in test_kprobes.c.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

[PATCH v2 3/6] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit can be enabled with CONFIG_AUDIT_GENERIC.
Most of audit features are implemented in generic way. This patch
adds a small piece of architecture dependent code.
syscall_get_arch(), which is used in seccomp, should just return
AUDIT_ARCH_*.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/syscall.h |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 70ba9d4..3361fec 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <linux/audit.h>
 #include <linux/err.h>
+#include <linux/sched.h>
 
 
 static inline int syscall_get_nr(struct task_struct *task,
@@ -104,4 +106,14 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+#ifdef __AARCH64EB__
+	return AUDIT_ARCH_AARCH64EB;
+#else
+	return AUDIT_ARCH_AARCH64;
+#endif
+}
+
 #endif	/* __ASM_SYSCALL_H */
-- 
1.7.9.5

[PATCH v2 4/6] arm64: audit: Add 32-bit (compat) syscall support

[AKASHI Takahiro]

Generic audit code also support compat system calls now.
This patch adds a small piece of architecture dependent code.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/audit.h   |   20 ++++++++++++++++++++
 arch/arm64/include/asm/syscall.h |   10 ++++++++++
 2 files changed, 30 insertions(+)
 create mode 100644 arch/arm64/include/asm/audit.h

diff --git a/arch/arm64/include/asm/audit.h b/arch/arm64/include/asm/audit.h
new file mode 100644
index 0000000..70eef50
--- /dev/null
+++ b/arch/arm64/include/asm/audit.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm64/include/asm/audit.h
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_AUDIT_H
+#define __ASM_AUDIT_H
+
+#include <linux/audit.h>
+
+#define audit_is_compat(arch) \
+		((arch == AUDIT_ARCH_ARM) || (arch == AUDIT_ARCH_ARMEB))
+
+#endif /* __ASM_AUDIT_H */
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 3361fec..d7660e9 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -19,6 +19,7 @@
 #include <linux/audit.h>
 #include <linux/err.h>
 #include <linux/sched.h>
+#include <asm/compat.h>
 
 
 static inline int syscall_get_nr(struct task_struct *task,
@@ -109,6 +110,15 @@ static inline void syscall_set_arguments(struct task_struct *task,
 static inline int syscall_get_arch(struct task_struct *task,
 				   struct pt_regs *regs)
 {
+#ifdef CONFIG_COMPAT
+	if (is_compat_thread(task_thread_info(task)))
+#ifdef __AARCH64EB__
+		return AUDIT_ARCH_ARMEB; /* only BE on BE */
+#else
+		return AUDIT_ARCH_ARM;
+#endif
+#endif
+
 #ifdef __AARCH64EB__
 	return AUDIT_ARCH_AARCH64EB;
 #else
-- 
1.7.9.5

Re: [PATCH v2 4/6] arm64: audit: Add 32-bit (compat) syscall support

[Will Deacon]

Hi Akashi,

On Fri, Jan 17, 2014 at 08:13:17AM +0000, AKASHI Takahiro wrote:
> Generic audit code also support compat system calls now.
> This patch adds a small piece of architecture dependent code.

[...]

>  static inline int syscall_get_nr(struct task_struct *task,
> @@ -109,6 +110,15 @@ static inline void syscall_set_arguments(struct task_struct *task,
>  static inline int syscall_get_arch(struct task_struct *task,
>  				   struct pt_regs *regs)
>  {
> +#ifdef CONFIG_COMPAT
> +	if (is_compat_thread(task_thread_info(task)))

You can call is_compat_thread even when !CONFIG_COMPAT, so you don't need
that #ifdef.

> +#ifdef __AARCH64EB__
> +		return AUDIT_ARCH_ARMEB; /* only BE on BE */

Well, actually, we only support userspace to be the same endianness as the
kernel, so you that comment is slightly misleading. You could probably avoid
these repeated ifdefs by defining things like ARM64_AUDIT_ARCH and
ARM64_COMPAT_AUDIT_ARCH once depending on endianness.

Will

Re: [PATCH v2 4/6] arm64: audit: Add 32-bit (compat) syscall support

[AKASHI Takahiro]

On 01/18/2014 01:46 AM, Will Deacon wrote:
> Hi Akashi,
>
> On Fri, Jan 17, 2014 at 08:13:17AM +0000, AKASHI Takahiro wrote:
>> Generic audit code also support compat system calls now.
>> This patch adds a small piece of architecture dependent code.
>
> [...]
>
>>   static inline int syscall_get_nr(struct task_struct *task,
>> @@ -109,6 +110,15 @@ static inline void syscall_set_arguments(struct task_struct *task,
>>   static inline int syscall_get_arch(struct task_struct *task,
>>   				   struct pt_regs *regs)
>>   {
>> +#ifdef CONFIG_COMPAT
>> +	if (is_compat_thread(task_thread_info(task)))
>
> You can call is_compat_thread even when !CONFIG_COMPAT, so you don't need
> that #ifdef.

Right. I will remove it.

>> +#ifdef __AARCH64EB__
>> +		return AUDIT_ARCH_ARMEB; /* only BE on BE */
>
> Well, actually, we only support userspace to be the same endianness as the
> kernel, so you that comment is slightly misleading. You could probably avoid
> these repeated ifdefs by defining things like ARM64_AUDIT_ARCH and
> ARM64_COMPAT_AUDIT_ARCH once depending on endianness.

As in the discussions about "audit(userspace)", if we don't have to care
about endianness, I will remove this #ifdef instead.

Thanks,
-Takahiro AKASHI

> Will
>

[PATCH v2 5/6] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls

[AKASHI Takahiro]

generic compat sycall audit (lib/compat_audit.c) requires unistd_32.h
for __NR_xyx compat syscall numbers. This is a different file from unistd32.h
on arm64 and so it must be generated from unistd32.h.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/Makefile                 |    4 ++++
 arch/arm64/kernel/syscalls/Makefile |   20 ++++++++++++++++++++
 2 files changed, 24 insertions(+)
 create mode 100644 arch/arm64/kernel/syscalls/Makefile

diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 2fceb71..6d24f92 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -72,6 +72,10 @@ PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
 
+# Compat syscall header generation
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/arm64/kernel/syscalls $@
+
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm64/kernel/syscalls/Makefile b/arch/arm64/kernel/syscalls/Makefile
new file mode 100644
index 0000000..7661113
--- /dev/null
+++ b/arch/arm64/kernel/syscalls/Makefile
@@ -0,0 +1,20 @@
+out := $(obj)/../../include/generated/asm
+
+# Create output directory if not already present
+_dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)')
+
+syshdr-$(CONFIG_COMPAT)		+= unistd_32.h
+
+targets	+= $(syshdr-y)
+
+quiet_cmd_syshdr = SYSHDR $@
+	cmd_syshdr = cat $< | sed -r \
+	-e 's/compat_//' \
+	-e 's/_wrapper//' \
+	-e 's/^__SYSCALL\((.*),[ ]*sys_([^)].*)\).*/\#define __NR_\2 \1/p;d' \
+	| grep -v __NR_ni_syscall > $@
+
+archheaders: $(addprefix $(out)/,$(syshdr-y))
+
+$(out)/unistd_32.h: $(src)/../../include/asm/unistd32.h
+	$(call if_changed,syshdr)
-- 
1.7.9.5

Re: [PATCH v2 5/6] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls

[Catalin Marinas]

On Fri, Jan 17, 2014 at 08:13:18AM +0000, AKASHI Takahiro wrote:
> generic compat sycall audit (lib/compat_audit.c) requires unistd_32.h
> for __NR_xyx compat syscall numbers. This is a different file from unistd32.h
> on arm64 and so it must be generated from unistd32.h.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/Makefile                 |    4 ++++
>  arch/arm64/kernel/syscalls/Makefile |   20 ++++++++++++++++++++
>  2 files changed, 24 insertions(+)
>  create mode 100644 arch/arm64/kernel/syscalls/Makefile
> 
> diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
> index 2fceb71..6d24f92 100644
> --- a/arch/arm64/Makefile
> +++ b/arch/arm64/Makefile
> @@ -72,6 +72,10 @@ PHONY += vdso_install
>  vdso_install:
>  	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
>  
> +# Compat syscall header generation
> +archheaders:
> +	$(Q)$(MAKE) $(build)=arch/arm64/kernel/syscalls $@

See my other post to the lib/compat_audit.c file. I think that's too
complex for what you need.

-- 
Catalin

Re: [PATCH v2 5/6] arm64: audit: Add makefile rule to create unistd_32.h for compat syscalls

[AKASHI Takahiro]

Catalin,

On 01/23/2014 11:53 PM, Catalin Marinas wrote:
> On Fri, Jan 17, 2014 at 08:13:18AM +0000, AKASHI Takahiro wrote:
>> generic compat sycall audit (lib/compat_audit.c) requires unistd_32.h
>> for __NR_xyx compat syscall numbers. This is a different file from unistd32.h
>> on arm64 and so it must be generated from unistd32.h.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/Makefile                 |    4 ++++
>>   arch/arm64/kernel/syscalls/Makefile |   20 ++++++++++++++++++++
>>   2 files changed, 24 insertions(+)
>>   create mode 100644 arch/arm64/kernel/syscalls/Makefile
>>
>> diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
>> index 2fceb71..6d24f92 100644
>> --- a/arch/arm64/Makefile
>> +++ b/arch/arm64/Makefile
>> @@ -72,6 +72,10 @@ PHONY += vdso_install
>>   vdso_install:
>>   	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
>>
>> +# Compat syscall header generation
>> +archheaders:
>> +	$(Q)$(MAKE) $(build)=arch/arm64/kernel/syscalls $@
>
> See my other post to the lib/compat_audit.c file. I think that's too
> complex for what you need.

Generation script is getting more complexed than I assumed at first
because some of system call names are a bit inconsistent with native 32-bit
system calls, for example, fchown16 vs. fchown, fchown vs. fchown32.

Now my tentative sed script looks like:
+quiet_cmd_syshdr = SYSHDR $@
+        cmd_syshdr = cat $< | sed -r \
+        -e 's/compat_//' \
+        -e 's/_wrapper//' \
+        -e 's/(sys_[fl]?chown)(\))/\132\)/' \
+        -e 's/(sys_[gs]et)(|e|fs|re|res)(uid\))/\1\2uid32\)/' \
+        -e 's/(sys_[gs]et)(|e|fs|re|res)(gid\))/\1\2gid32\)/' \
+        -e 's/(sys_[gs]etgroups)(\))/\132\)/' \
+        -e 's/(sys_new)(.*)/sys_\2/' \
+        -e 's/sys_mmap_pgoff/sys_mmap2/' \
+        -e 's/(sys_[_a-z]*)16(.*)/\1\2/' \
+        -e 's/^__SYSCALL\((.*),[ ]*sys_([^)].*)\).*/\#define __NR_\2 \1/p;d' \
+        | grep -v __NR_ni_syscall > $@

So, yeah, I agree with you now.

-Takahiro AKASHI

[PATCH v2 6/6] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |    1 +
 arch/arm64/kernel/entry.S            |    3 +++
 arch/arm64/kernel/ptrace.c           |   12 ++++++++++++
 3 files changed, 16 insertions(+)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..7468388 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -101,6 +101,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 4d2c6f3..5bb2c26 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -631,6 +631,9 @@ el0_svc_naked:					// compat entry point
 	get_thread_info tsk
 	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
 	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+#ifdef CONFIG_AUDITSYSCALL
+	tbnz	x16, #TIF_SYSCALL_AUDIT, __sys_trace // auditing syscalls?
+#endif
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6777a21..2ca169b 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1064,6 +1066,16 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
+#ifdef CONFIG_AUDITSYSCALL
+	if (dir)
+		audit_syscall_exit(regs);
+	else
+		audit_syscall_entry(syscall_get_arch(current, regs),
+			(int)regs->syscallno,
+			regs->orig_x0, regs->regs[1],
+			regs->regs[2], regs->regs[3]);
+#endif /* CONFIG_AUDITSYSCALL */
+
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return regs->syscallno;
 
-- 
1.7.9.5

Re: [PATCH v2 6/6] arm64: audit: Add audit hook in ptrace/syscall_trace

[Catalin Marinas]

On Fri, Jan 17, 2014 at 08:13:19AM +0000, AKASHI Takahiro wrote:
> @@ -1064,6 +1066,16 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  {
>  	unsigned long saved_reg;
>  
> +#ifdef CONFIG_AUDITSYSCALL
> +	if (dir)
> +		audit_syscall_exit(regs);
> +	else
> +		audit_syscall_entry(syscall_get_arch(current, regs),
> +			(int)regs->syscallno,
> +			regs->orig_x0, regs->regs[1],
> +			regs->regs[2], regs->regs[3]);
> +#endif /* CONFIG_AUDITSYSCALL */

It should work without the #ifdef as audit_syscall_exit/entry are dummy
static inline functions when !CONFIG_AUDITSYSCALL.

-- 
Catalin

Re: [PATCH v2 0/6] arm64: Add audit support

[Richard Guy Briggs]

On 14/01/17, AKASHI Takahiro wrote:
> This patchset adds system call audit support on arm64.
> Both 32-bit (AUIDT_ARCH_ARM[EB]) and 64-bit tasks (AUDIT_ARCH_AARCH64[EB])
> are supported, but presuming 32-LE on 64-LE or 32-BE on 64-BE.
> 
> There are some prerequisites for this patch to work correctly:
> * "generic compat system call audit support" patch
> * "correct a type mismatch in audit_syscall_exit()" patch
>    (already accepted and queued in 3.14)
> * "Modify a set of system calls in audit class" patch
> * userspace audit tool (v2.3.2 + my patch for arm64)
> 
> All those were already or will be soon posted separately.
> Please review them as well for better understandings.
> 
> This code was tested on both 32-bit and 64-bit LE userland 
> in the following two ways:
> 1) basic operations with auditctl/autrace
>   # auditctl -a exit,always -S openat -F path=/etc/inittab
>   # auditctl -a exit,always -F dir=/tmp -F perm=rw
>   # auditctl -a task,always
>   # autrace /bin/ls
>     by comparing output from autrace with one from strace
> 
> 2) audit-test-code (+ my workarounds for arm/arm64)
>   by running "audit-tool", "filter" and "syscalls" test categories.
> 
> Changes v1 -> v2:
> * Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
>   Please note that a required header, unistd_32.h, is automatically
>   generated from unistd32.h.
> * Refer to regs->orig_x0 instead of regs->x0 as the first argument of
>   system call in audit_syscall_entry() [6/6]
> * Include "Add regs_return_value() in syscall.h" patch [2/6],
>   which was not intentionally included in v1 because it could be added
>   by "kprobes support".
> 
> 
> AKASHI Takahiro (6):
>   audit: Enable arm64 support
>   arm64: Add regs_return_value() in syscall.h
>   arm64: Add audit support
>   arm64: audit: Add 32-bit (compat) syscall support
>   arm64: audit: Add makefile rule to create unistd_32.h for compat
>     syscalls
>   arm64: audit: Add audit hook in ptrace/syscall_trace
> 
>  arch/arm64/Makefile                  |    4 ++++
>  arch/arm64/include/asm/audit.h       |   20 ++++++++++++++++++++
>  arch/arm64/include/asm/ptrace.h      |    5 +++++
>  arch/arm64/include/asm/syscall.h     |   22 ++++++++++++++++++++++
>  arch/arm64/include/asm/thread_info.h |    1 +
>  arch/arm64/kernel/entry.S            |    3 +++
>  arch/arm64/kernel/ptrace.c           |   12 ++++++++++++
>  arch/arm64/kernel/syscalls/Makefile  |   20 ++++++++++++++++++++
>  include/uapi/linux/audit.h           |    2 ++
>  init/Kconfig                         |    2 +-
>  10 files changed, 90 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/include/asm/audit.h
>  create mode 100644 arch/arm64/kernel/syscalls/Makefile
> 
> -- 
> 1.7.9.5

Set:
Acked-by: Richard Guy Briggs <rgb@redhat.com>

> 

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

[PATCH v3 0/3] arm64: Add audit support

[AKASHI Takahiro]

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "generic compat system call audit support" patch
* "correct a type mismatch in audit_syscall_exit()" patch
   (already accepted and queued in 3.14)
* "Modify a set of system calls in audit class" patch
   (already accepted and queued in 3.14)
* "__NR_* definitions for compat syscalls" patch from Catalin
* userspace audit tool (v2.3.2 + my patch for arm64)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

AKASHI Takahiro (3):
  arm64: Add regs_return_value() in syscall.h
  arm64: Add audit support
  arm64: audit: Add audit hook in ptrace/syscall_trace

 arch/arm64/Kconfig                   |    1 +
 arch/arm64/include/asm/ptrace.h      |    5 +++++
 arch/arm64/include/asm/syscall.h     |   15 +++++++++++++++
 arch/arm64/include/asm/thread_info.h |    1 +
 arch/arm64/kernel/entry.S            |    3 +++
 arch/arm64/kernel/ptrace.c           |   10 ++++++++++
 include/uapi/linux/audit.h           |    1 +
 7 files changed, 36 insertions(+)

-- 
1.7.9.5

[PATCH v3 1/3] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

Re: [PATCH v3 1/3] arm64: Add regs_return_value() in syscall.h

[Will Deacon]

On Mon, Feb 03, 2014 at 06:56:28AM +0000, AKASHI Takahiro wrote:
> This macro, regs_return_value, is used mainly for audit to record system
> call's results, but may also be used in test_kprobes.c.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

  Acked-by: Will Deacon <will.deacon@arm.com>

Will

[PATCH v3 2/3] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 include/uapi/linux/audit.h       |    1 +
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6d4dd22..3c21405 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -19,6 +19,7 @@ config ARM64
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 70ba9d4..6900183 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <linux/audit.h>
 #include <linux/err.h>
+#include <asm/compat.h>
 
 
 static inline int syscall_get_nr(struct task_struct *task,
@@ -104,4 +106,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 0a73cf3..cf27cae 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -327,6 +327,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.7.9.5

Re: [PATCH v3 2/3] arm64: Add audit support

[Will Deacon]

On Mon, Feb 03, 2014 at 06:56:29AM +0000, AKASHI Takahiro wrote:
> On AArch64, audit is supported through generic lib/audit.c and
> compat_audit.c, and so this patch adds arch specific definitions required.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/Kconfig               |    1 +
>  arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
>  include/uapi/linux/audit.h       |    1 +
>  3 files changed, 17 insertions(+)

  Acked-by: Will Deacon <will.deacon@arm.com>

Will

[PATCH v3 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |    1 +
 arch/arm64/kernel/entry.S            |    3 +++
 arch/arm64/kernel/ptrace.c           |   10 ++++++++++
 3 files changed, 14 insertions(+)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..7468388 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -101,6 +101,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 827cbad..83c4b29 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -630,6 +630,9 @@ el0_svc_naked:					// compat entry point
 	get_thread_info tsk
 	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
 	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+#ifdef CONFIG_AUDITSYSCALL
+	tbnz	x16, #TIF_SYSCALL_AUDIT, __sys_trace // auditing syscalls?
+#endif
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6777a21..75a3f23 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1064,6 +1066,14 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
+	if (dir)
+		audit_syscall_exit(regs);
+	else
+		audit_syscall_entry(syscall_get_arch(current, regs),
+			(int)regs->syscallno,
+			regs->orig_x0, regs->regs[1],
+			regs->regs[2], regs->regs[3]);
+
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return regs->syscallno;
 
-- 
1.7.9.5

Re: [PATCH v3 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

[Will Deacon]

On Mon, Feb 03, 2014 at 06:56:30AM +0000, AKASHI Takahiro wrote:
> This patch adds auditing functions on entry to or exit from
> every system call invocation.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/include/asm/thread_info.h |    1 +
>  arch/arm64/kernel/entry.S            |    3 +++
>  arch/arm64/kernel/ptrace.c           |   10 ++++++++++
>  3 files changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index 720e70b..7468388 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h
> @@ -101,6 +101,7 @@ static inline struct thread_info *current_thread_info(void)
>  #define TIF_NEED_RESCHED	1
>  #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
>  #define TIF_SYSCALL_TRACE	8
> +#define TIF_SYSCALL_AUDIT	9
>  #define TIF_POLLING_NRFLAG	16
>  #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
>  #define TIF_FREEZE		19
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 827cbad..83c4b29 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -630,6 +630,9 @@ el0_svc_naked:					// compat entry point
>  	get_thread_info tsk
>  	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
>  	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
> +#ifdef CONFIG_AUDITSYSCALL
> +	tbnz	x16, #TIF_SYSCALL_AUDIT, __sys_trace // auditing syscalls?
> +#endif

Could we avoid the back-to-back tbnz instructions with a single mask? It's
not obvious that it will end up any better, but it would be good to know.

>  	adr	lr, ret_fast_syscall		// return address
>  	cmp     scno, sc_nr                     // check upper syscall limit
>  	b.hs	ni_sys
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 6777a21..75a3f23 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -19,6 +19,7 @@
>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>   */
>  
> +#include <linux/audit.h>
>  #include <linux/kernel.h>
>  #include <linux/sched.h>
>  #include <linux/mm.h>
> @@ -38,6 +39,7 @@
>  #include <asm/compat.h>
>  #include <asm/debug-monitors.h>
>  #include <asm/pgtable.h>
> +#include <asm/syscall.h>
>  #include <asm/traps.h>
>  #include <asm/system_misc.h>
>  
> @@ -1064,6 +1066,14 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  {
>  	unsigned long saved_reg;
>  
> +	if (dir)
> +		audit_syscall_exit(regs);
> +	else
> +		audit_syscall_entry(syscall_get_arch(current, regs),
> +			(int)regs->syscallno,
> +			regs->orig_x0, regs->regs[1],
> +			regs->regs[2], regs->regs[3]);
> +

Do we really want to perform the audit checks before the tracehook calls?
Remember that the latter can rewrite all of the registers.

Will

Re: [PATCH v3 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

On 02/05/2014 02:31 AM, Will Deacon wrote:
> On Mon, Feb 03, 2014 at 06:56:30AM +0000, AKASHI Takahiro wrote:
>> This patch adds auditing functions on entry to or exit from
>> every system call invocation.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/include/asm/thread_info.h |    1 +
>>   arch/arm64/kernel/entry.S            |    3 +++
>>   arch/arm64/kernel/ptrace.c           |   10 ++++++++++
>>   3 files changed, 14 insertions(+)
>>
>> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
>> index 720e70b..7468388 100644
>> --- a/arch/arm64/include/asm/thread_info.h
>> +++ b/arch/arm64/include/asm/thread_info.h
>> @@ -101,6 +101,7 @@ static inline struct thread_info *current_thread_info(void)
>>   #define TIF_NEED_RESCHED	1
>>   #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
>>   #define TIF_SYSCALL_TRACE	8
>> +#define TIF_SYSCALL_AUDIT	9
>>   #define TIF_POLLING_NRFLAG	16
>>   #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
>>   #define TIF_FREEZE		19
>> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> index 827cbad..83c4b29 100644
>> --- a/arch/arm64/kernel/entry.S
>> +++ b/arch/arm64/kernel/entry.S
>> @@ -630,6 +630,9 @@ el0_svc_naked:					// compat entry point
>>   	get_thread_info tsk
>>   	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
>>   	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
>> +#ifdef CONFIG_AUDITSYSCALL
>> +	tbnz	x16, #TIF_SYSCALL_AUDIT, __sys_trace // auditing syscalls?
>> +#endif
>
> Could we avoid the back-to-back tbnz instructions with a single mask? It's
> not obvious that it will end up any better, but it would be good to know.

When first implementing ftrace support, TIF_SYSCALL_TRACEPOINT is defined as 10
and 'tst' instruction doesn't allow the following code:
     tst x16, #(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_TRACEPOINT)

That is why I've used "back-to-back" tbnz since then, but now that I'm going to
submit ftrace, audit and later seccomp, I will replace it with:
     #define TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE|TRACEPOINT|AUDIT|SECCOMP)

     tst x16, #TIF_SYSCALL_WORK
     b.ne __syscall_trace


>>   	adr	lr, ret_fast_syscall		// return address
>>   	cmp     scno, sc_nr                     // check upper syscall limit
>>   	b.hs	ni_sys
>> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
>> index 6777a21..75a3f23 100644
>> --- a/arch/arm64/kernel/ptrace.c
>> +++ b/arch/arm64/kernel/ptrace.c
>> @@ -19,6 +19,7 @@
>>    * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>>    */
>>
>> +#include <linux/audit.h>
>>   #include <linux/kernel.h>
>>   #include <linux/sched.h>
>>   #include <linux/mm.h>
>> @@ -38,6 +39,7 @@
>>   #include <asm/compat.h>
>>   #include <asm/debug-monitors.h>
>>   #include <asm/pgtable.h>
>> +#include <asm/syscall.h>
>>   #include <asm/traps.h>
>>   #include <asm/system_misc.h>
>>
>> @@ -1064,6 +1066,14 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>>   {
>>   	unsigned long saved_reg;
>>
>> +	if (dir)
>> +		audit_syscall_exit(regs);
>> +	else
>> +		audit_syscall_entry(syscall_get_arch(current, regs),
>> +			(int)regs->syscallno,
>> +			regs->orig_x0, regs->regs[1],
>> +			regs->regs[2], regs->regs[3]);
>> +
>
> Do we really want to perform the audit checks before the tracehook calls?
> Remember that the latter can rewrite all of the registers.

OK. I will change the code to make calls in the following order:
On entry,
    *secure_computing
    *tracehook_report_syscall(ENTER)
    *trace_sys_enter
    *audit_syscall_entry
On exit,
    *audit_syscall_exit
    *trace_sys_exit
    *tracehook_report_syscall(EXIT)

The order here is the exact same as on x86, but such change might
decrease the readability in syscall_trace().

Thanks,
-Takahiro AKASHI

> Will
>

[PATCH] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags introduced, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.
Those features will be implemented later, but it's safe to include them
now because they can not be turned on anyway.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
 arch/arm64/kernel/entry.S            |    5 +++--
 arch/arm64/kernel/ptrace.c           |   11 +++++------
 3 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..c3df797 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
+ *  TIF_SYSCALL_AUDIT	- syscall auditing
+ *  TIF_SECOMP		- syscall secure computing
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
  *  TIF_NOTIFY_RESUME	- callback before returning to user
@@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
@@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME)
 
+#define _TIF_WORK_SYSCALL	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 39ac630..c94b2ab 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
 	enable_irq
 
 	get_thread_info tsk
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
-	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	tst	x16, #_TIF_WORK_SYSCALL
+	b.ne	__sys_trace
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6a8928b..64ce39f 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1062,9 +1062,6 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return regs->syscallno;
-
 	if (is_compat_task()) {
 		/* AArch32 uses ip (r12) for scratch */
 		saved_reg = regs->regs[12];
@@ -1078,10 +1075,12 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 		regs->regs[7] = dir;
 	}
 
-	if (dir)
+	if (dir) {
 		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
-		regs->syscallno = ~0UL;
+	} else {
+		if (tracehook_report_syscall_entry(regs))
+			regs->syscallno = ~0UL;
+	}
 
 	if (is_compat_task())
 		regs->regs[12] = saved_reg;
-- 
1.7.9.5

Re: [PATCH] arm64: make a single hook to syscall_trace() for all syscall features

[Richard Guy Briggs]

On 14/02/07, AKASHI Takahiro wrote:
> Currently syscall_trace() is called only for ptrace.
> With additional TIF_xx flags introduced, it is now called in all the cases
> of audit, ftrace and seccomp in addition to ptrace.
> Those features will be implemented later, but it's safe to include them
> now because they can not be turned on anyway.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Acked-by: Richard Guy Briggs <rgb@redhat.com>

> ---
>  arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
>  arch/arm64/kernel/entry.S            |    5 +++--
>  arch/arm64/kernel/ptrace.c           |   11 +++++------
>  3 files changed, 21 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index 720e70b..c3df797 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h
> @@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
>  /*
>   * thread information flags:
>   *  TIF_SYSCALL_TRACE	- syscall trace active
> + *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
> + *  TIF_SYSCALL_AUDIT	- syscall auditing
> + *  TIF_SECOMP		- syscall secure computing
>   *  TIF_SIGPENDING	- signal pending
>   *  TIF_NEED_RESCHED	- rescheduling necessary
>   *  TIF_NOTIFY_RESUME	- callback before returning to user
> @@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
>  #define TIF_NEED_RESCHED	1
>  #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
>  #define TIF_SYSCALL_TRACE	8
> +#define TIF_SYSCALL_AUDIT	9
> +#define TIF_SYSCALL_TRACEPOINT	10
> +#define TIF_SECCOMP		11
>  #define TIF_POLLING_NRFLAG	16
>  #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
>  #define TIF_FREEZE		19
> @@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
>  #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
>  #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
>  #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
> +#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
> +#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
> +#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
> +#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
>  #define _TIF_32BIT		(1 << TIF_32BIT)
>  
>  #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
>  				 _TIF_NOTIFY_RESUME)
>  
> +#define _TIF_WORK_SYSCALL	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
> +				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
> +
>  #endif /* __KERNEL__ */
>  #endif /* __ASM_THREAD_INFO_H */
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 39ac630..c94b2ab 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
>  	enable_irq
>  
>  	get_thread_info tsk
> -	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
> -	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
> +	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
> +	tst	x16, #_TIF_WORK_SYSCALL
> +	b.ne	__sys_trace
>  	adr	lr, ret_fast_syscall		// return address
>  	cmp     scno, sc_nr                     // check upper syscall limit
>  	b.hs	ni_sys
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 6a8928b..64ce39f 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -1062,9 +1062,6 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  {
>  	unsigned long saved_reg;
>  
> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
> -		return regs->syscallno;
> -
>  	if (is_compat_task()) {
>  		/* AArch32 uses ip (r12) for scratch */
>  		saved_reg = regs->regs[12];
> @@ -1078,10 +1075,12 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  		regs->regs[7] = dir;
>  	}
>  
> -	if (dir)
> +	if (dir) {
>  		tracehook_report_syscall_exit(regs, 0);
> -	else if (tracehook_report_syscall_entry(regs))
> -		regs->syscallno = ~0UL;
> +	} else {
> +		if (tracehook_report_syscall_entry(regs))
> +			regs->syscallno = ~0UL;
> +	}
>  
>  	if (is_compat_task())
>  		regs->regs[12] = saved_reg;
> -- 
> 1.7.9.5
> 
> --
> Linux-audit mailing list
> Linux-audit@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-audit

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH] arm64: make a single hook to syscall_trace() for all syscall features

[Will Deacon]

On Fri, Feb 07, 2014 at 10:07:31AM +0000, AKASHI Takahiro wrote:
> Currently syscall_trace() is called only for ptrace.
> With additional TIF_xx flags introduced, it is now called in all the cases
> of audit, ftrace and seccomp in addition to ptrace.
> Those features will be implemented later, but it's safe to include them
> now because they can not be turned on anyway.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
>  arch/arm64/kernel/entry.S            |    5 +++--
>  arch/arm64/kernel/ptrace.c           |   11 +++++------
>  3 files changed, 21 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index 720e70b..c3df797 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h

[...]

> +#define _TIF_WORK_SYSCALL	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
> +				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)

This is called _TIF_SYSCALL_WORK on arch/arm/, any reason not to follow the
naming convention here?

>  #endif /* __KERNEL__ */
>  #endif /* __ASM_THREAD_INFO_H */
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 39ac630..c94b2ab 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
>  	enable_irq
>  
>  	get_thread_info tsk
> -	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
> -	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
> +	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
> +	tst	x16, #_TIF_WORK_SYSCALL
> +	b.ne	__sys_trace
>  	adr	lr, ret_fast_syscall		// return address
>  	cmp     scno, sc_nr                     // check upper syscall limit
>  	b.hs	ni_sys
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 6a8928b..64ce39f 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -1062,9 +1062,6 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  {
>  	unsigned long saved_reg;
>  
> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
> -		return regs->syscallno;

This doesn't look right for things like audit (where we don't want to report
the syscall if only _TIF_SYSCALL_AUDIT is set, for example).

>  	if (is_compat_task()) {
>  		/* AArch32 uses ip (r12) for scratch */
>  		saved_reg = regs->regs[12];
> @@ -1078,10 +1075,12 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  		regs->regs[7] = dir;
>  	}
>  
> -	if (dir)
> +	if (dir) {
>  		tracehook_report_syscall_exit(regs, 0);
> -	else if (tracehook_report_syscall_entry(regs))
> -		regs->syscallno = ~0UL;
> +	} else {
> +		if (tracehook_report_syscall_entry(regs))
> +			regs->syscallno = ~0UL;
> +	}

This hunk doesn't do anything.

Will

Re: [PATCH] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Hi,

On 02/18/2014 02:35 AM, Will Deacon wrote:
> On Fri, Feb 07, 2014 at 10:07:31AM +0000, AKASHI Takahiro wrote:
>> Currently syscall_trace() is called only for ptrace.
>> With additional TIF_xx flags introduced, it is now called in all the cases
>> of audit, ftrace and seccomp in addition to ptrace.
>> Those features will be implemented later, but it's safe to include them
>> now because they can not be turned on anyway.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
>>   arch/arm64/kernel/entry.S            |    5 +++--
>>   arch/arm64/kernel/ptrace.c           |   11 +++++------
>>   3 files changed, 21 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
>> index 720e70b..c3df797 100644
>> --- a/arch/arm64/include/asm/thread_info.h
>> +++ b/arch/arm64/include/asm/thread_info.h
>
> [...]
>
>> +#define _TIF_WORK_SYSCALL	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
>> +				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
>
> This is called _TIF_SYSCALL_WORK on arch/arm/, any reason not to follow the
> naming convention here?

This is called _TIF_WORK_SYSCALL on arch/x86 :-)
That is the only reason, and so I don't have any objection to following arm
if you prefer it.

>>   #endif /* __KERNEL__ */
>>   #endif /* __ASM_THREAD_INFO_H */
>> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> index 39ac630..c94b2ab 100644
>> --- a/arch/arm64/kernel/entry.S
>> +++ b/arch/arm64/kernel/entry.S
>> @@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
>>   	enable_irq
>>
>>   	get_thread_info tsk
>> -	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
>> -	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
>> +	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
>> +	tst	x16, #_TIF_WORK_SYSCALL
>> +	b.ne	__sys_trace
>>   	adr	lr, ret_fast_syscall		// return address
>>   	cmp     scno, sc_nr                     // check upper syscall limit
>>   	b.hs	ni_sys
>> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
>> index 6a8928b..64ce39f 100644
>> --- a/arch/arm64/kernel/ptrace.c
>> +++ b/arch/arm64/kernel/ptrace.c
>> @@ -1062,9 +1062,6 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>>   {
>>   	unsigned long saved_reg;
>>
>> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
>> -		return regs->syscallno;
>
> This doesn't look right for things like audit (where we don't want to report
> the syscall if only _TIF_SYSCALL_AUDIT is set, for example).

Yeah, it is my screwup.
I will add the guards against TIF_SYSCALL_TRACE (for ptrace),
TIF_SYSCALL_TRACEPOINT (for ftrace) and TIF_SYSCALL_AUDIT (for audit).

secure_computing() is protected in itself.

>>   	if (is_compat_task()) {
>>   		/* AArch32 uses ip (r12) for scratch */
>>   		saved_reg = regs->regs[12];
>> @@ -1078,10 +1075,12 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>>   		regs->regs[7] = dir;
>>   	}
>>
>> -	if (dir)
>> +	if (dir) {
>>   		tracehook_report_syscall_exit(regs, 0);
>> -	else if (tracehook_report_syscall_entry(regs))
>> -		regs->syscallno = ~0UL;
>> +	} else {
>> +		if (tracehook_report_syscall_entry(regs))
>> +			regs->syscallno = ~0UL;
>> +	}
>
> This hunk doesn't do anything.

Well, this is just a change for future patches, but
I will remove it anyway due to the guards mentioned above.

-Takahiro AKASHI

> Will
>

[PATCH v2 0/1] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

This patch makes it easy to add syscall related hooks, including ftrace,
audit and seccomp, in syscall_trace() later.
Those features will be implemented in separate patchsets, but it's safe to
check for all TIF_* now because they can not be turned on anyway.

Changes v1 -> v2:
* added a guard against TIF_SYSCALL_TRACE at tracehook_report_syscall_*()
* renamed _TIF_WORK_SYSCALL to _TIF_SYSCALL_WORK

AKASHI Takahiro (1):
  arm64: make a single hook to syscall_trace() for all syscall features

 arch/arm64/include/asm/thread_info.h |   13 ++++++++++
 arch/arm64/kernel/entry.S            |    5 ++--
 arch/arm64/kernel/ptrace.c           |   45 +++++++++++++++++-----------------
 3 files changed, 38 insertions(+), 25 deletions(-)

-- 
1.7.9.5

[PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
---
 arch/arm64/include/asm/thread_info.h |   13 ++++++++++
 arch/arm64/kernel/entry.S            |    5 ++--
 arch/arm64/kernel/ptrace.c           |   45 +++++++++++++++++-----------------
 3 files changed, 38 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..0a8b2a9 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
+ *  TIF_SYSCALL_AUDIT	- syscall auditing
+ *  TIF_SECOMP		- syscall secure computing
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
  *  TIF_NOTIFY_RESUME	- callback before returning to user
@@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
@@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 0d7b789..6d613cd 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -630,8 +630,9 @@ el0_svc_naked:					// compat entry point
 	enable_irq
 
 	get_thread_info tsk
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
-	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	tst	x16, #_TIF_SYSCALL_WORK
+	b.ne	__sys_trace
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6a8928b..c70133e 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1062,31 +1062,30 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return regs->syscallno;
-
-	if (is_compat_task()) {
-		/* AArch32 uses ip (r12) for scratch */
-		saved_reg = regs->regs[12];
-		regs->regs[12] = dir;
-	} else {
-		/*
-		 * Save X7. X7 is used to denote syscall entry/exit:
-		 *   X7 = 0 -> entry, = 1 -> exit
-		 */
-		saved_reg = regs->regs[7];
-		regs->regs[7] = dir;
-	}
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (is_compat_task()) {
+			/* AArch32 uses ip (r12) for scratch */
+			saved_reg = regs->regs[12];
+			regs->regs[12] = dir;
+		} else {
+			/*
+			 * Save X7. X7 is used to denote syscall entry/exit:
+			 *   X7 = 0 -> entry, = 1 -> exit
+			 */
+			saved_reg = regs->regs[7];
+			regs->regs[7] = dir;
+		}
 
-	if (dir)
-		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
-		regs->syscallno = ~0UL;
+		if (dir)
+			tracehook_report_syscall_exit(regs, 0);
+		else if (tracehook_report_syscall_entry(regs))
+			regs->syscallno = ~0UL;
 
-	if (is_compat_task())
-		regs->regs[12] = saved_reg;
-	else
-		regs->regs[7] = saved_reg;
+		if (is_compat_task())
+			regs->regs[12] = saved_reg;
+		else
+			regs->regs[7] = saved_reg;
+	}
 
 	return regs->syscallno;
 }
-- 
1.7.9.5

Re: [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features

[Will Deacon]

On Tue, Feb 25, 2014 at 09:14:43AM +0000, AKASHI Takahiro wrote:
> Currently syscall_trace() is called only for ptrace.
> With additional TIF_xx flags defined, it is now called in all the cases
> of audit, ftrace and seccomp in addition to ptrace.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> ---
>  arch/arm64/include/asm/thread_info.h |   13 ++++++++++
>  arch/arm64/kernel/entry.S            |    5 ++--
>  arch/arm64/kernel/ptrace.c           |   45 +++++++++++++++++-----------------
>  3 files changed, 38 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index 720e70b..0a8b2a9 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h
> @@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
>  /*
>   * thread information flags:
>   *  TIF_SYSCALL_TRACE	- syscall trace active
> + *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
> + *  TIF_SYSCALL_AUDIT	- syscall auditing
> + *  TIF_SECOMP		- syscall secure computing
>   *  TIF_SIGPENDING	- signal pending
>   *  TIF_NEED_RESCHED	- rescheduling necessary
>   *  TIF_NOTIFY_RESUME	- callback before returning to user
> @@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
>  #define TIF_NEED_RESCHED	1
>  #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
>  #define TIF_SYSCALL_TRACE	8
> +#define TIF_SYSCALL_AUDIT	9
> +#define TIF_SYSCALL_TRACEPOINT	10
> +#define TIF_SECCOMP		11
>  #define TIF_POLLING_NRFLAG	16
>  #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
>  #define TIF_FREEZE		19
> @@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
>  #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
>  #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
>  #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
> +#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
> +#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
> +#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
> +#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
>  #define _TIF_32BIT		(1 << TIF_32BIT)
>  
>  #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
>  				 _TIF_NOTIFY_RESUME)
>  
> +#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
> +				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
> +
>  #endif /* __KERNEL__ */
>  #endif /* __ASM_THREAD_INFO_H */
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 0d7b789..6d613cd 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -630,8 +630,9 @@ el0_svc_naked:					// compat entry point
>  	enable_irq
>  
>  	get_thread_info tsk
> -	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
> -	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
> +	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
> +	tst	x16, #_TIF_SYSCALL_WORK
> +	b.ne	__sys_trace
>  	adr	lr, ret_fast_syscall		// return address
>  	cmp     scno, sc_nr                     // check upper syscall limit
>  	b.hs	ni_sys

All looks fine up to here.

> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 6a8928b..c70133e 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -1062,31 +1062,30 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  {
>  	unsigned long saved_reg;
>  
> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
> -		return regs->syscallno;
> -
> -	if (is_compat_task()) {
> -		/* AArch32 uses ip (r12) for scratch */
> -		saved_reg = regs->regs[12];
> -		regs->regs[12] = dir;
> -	} else {
> -		/*
> -		 * Save X7. X7 is used to denote syscall entry/exit:
> -		 *   X7 = 0 -> entry, = 1 -> exit
> -		 */
> -		saved_reg = regs->regs[7];
> -		regs->regs[7] = dir;
> -	}
> +	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
> +		if (is_compat_task()) {
> +			/* AArch32 uses ip (r12) for scratch */
> +			saved_reg = regs->regs[12];
> +			regs->regs[12] = dir;
> +		} else {
> +			/*
> +			 * Save X7. X7 is used to denote syscall entry/exit:
> +			 *   X7 = 0 -> entry, = 1 -> exit
> +			 */
> +			saved_reg = regs->regs[7];
> +			regs->regs[7] = dir;
> +		}
>  
> -	if (dir)
> -		tracehook_report_syscall_exit(regs, 0);
> -	else if (tracehook_report_syscall_entry(regs))
> -		regs->syscallno = ~0UL;
> +		if (dir)
> +			tracehook_report_syscall_exit(regs, 0);
> +		else if (tracehook_report_syscall_entry(regs))
> +			regs->syscallno = ~0UL;
>  
> -	if (is_compat_task())
> -		regs->regs[12] = saved_reg;
> -	else
> -		regs->regs[7] = saved_reg;
> +		if (is_compat_task())
> +			regs->regs[12] = saved_reg;
> +		else
> +			regs->regs[7] = saved_reg;
> +	}

Aren't these changes (to ptrace.c) just a giant NOP?

Will

Re: [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

On 02/26/2014 12:00 AM, Will Deacon wrote:
> On Tue, Feb 25, 2014 at 09:14:43AM +0000, AKASHI Takahiro wrote:
>> Currently syscall_trace() is called only for ptrace.
>> With additional TIF_xx flags defined, it is now called in all the cases
>> of audit, ftrace and seccomp in addition to ptrace.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> Acked-by: Richard Guy Briggs <rgb@redhat.com>
>> ---
>>   arch/arm64/include/asm/thread_info.h |   13 ++++++++++
>>   arch/arm64/kernel/entry.S            |    5 ++--
>>   arch/arm64/kernel/ptrace.c           |   45 +++++++++++++++++-----------------
>>   3 files changed, 38 insertions(+), 25 deletions(-)

[...]

>> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
>> index 6a8928b..c70133e 100644
>> --- a/arch/arm64/kernel/ptrace.c
>> +++ b/arch/arm64/kernel/ptrace.c
>> @@ -1062,31 +1062,30 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>>   {
>>   	unsigned long saved_reg;
>>
>> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
>> -		return regs->syscallno;
>> -
>> -	if (is_compat_task()) {
>> -		/* AArch32 uses ip (r12) for scratch */
>> -		saved_reg = regs->regs[12];
>> -		regs->regs[12] = dir;
>> -	} else {
>> -		/*
>> -		 * Save X7. X7 is used to denote syscall entry/exit:
>> -		 *   X7 = 0 -> entry, = 1 -> exit
>> -		 */
>> -		saved_reg = regs->regs[7];
>> -		regs->regs[7] = dir;
>> -	}
>> +	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
>> +		if (is_compat_task()) {
>> +			/* AArch32 uses ip (r12) for scratch */
>> +			saved_reg = regs->regs[12];
>> +			regs->regs[12] = dir;
>> +		} else {
>> +			/*
>> +			 * Save X7. X7 is used to denote syscall entry/exit:
>> +			 *   X7 = 0 -> entry, = 1 -> exit
>> +			 */
>> +			saved_reg = regs->regs[7];
>> +			regs->regs[7] = dir;
>> +		}
>>
>> -	if (dir)
>> -		tracehook_report_syscall_exit(regs, 0);
>> -	else if (tracehook_report_syscall_entry(regs))
>> -		regs->syscallno = ~0UL;
>> +		if (dir)
>> +			tracehook_report_syscall_exit(regs, 0);
>> +		else if (tracehook_report_syscall_entry(regs))
>> +			regs->syscallno = ~0UL;
>>
>> -	if (is_compat_task())
>> -		regs->regs[12] = saved_reg;
>> -	else
>> -		regs->regs[7] = saved_reg;
>> +		if (is_compat_task())
>> +			regs->regs[12] = saved_reg;
>> +		else
>> +			regs->regs[7] = saved_reg;
>> +	}
>
> Aren't these changes (to ptrace.c) just a giant NOP?

Umm, the purpose of this big "if" is to run the code only if TIF_SYSCALL_TRACE is set,
and to make it easy to add additional hooks, audit and ftrace, around tracehook_report_*()
later on.

-Takahiro AKASHI

> Will
>

Re: [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features

[Will Deacon]

On Wed, Feb 26, 2014 at 02:00:19AM +0000, AKASHI Takahiro wrote:
> On 02/26/2014 12:00 AM, Will Deacon wrote:
> > On Tue, Feb 25, 2014 at 09:14:43AM +0000, AKASHI Takahiro wrote:
> >> Currently syscall_trace() is called only for ptrace.
> >> With additional TIF_xx flags defined, it is now called in all the cases
> >> of audit, ftrace and seccomp in addition to ptrace.
> >>
> >> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> >> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> >> ---
> >>   arch/arm64/include/asm/thread_info.h |   13 ++++++++++
> >>   arch/arm64/kernel/entry.S            |    5 ++--
> >>   arch/arm64/kernel/ptrace.c           |   45 +++++++++++++++++-----------------
> >>   3 files changed, 38 insertions(+), 25 deletions(-)
> 
> [...]
> 
> >> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> >> index 6a8928b..c70133e 100644
> >> --- a/arch/arm64/kernel/ptrace.c
> >> +++ b/arch/arm64/kernel/ptrace.c
> >> @@ -1062,31 +1062,30 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
> >>   {
> >>   	unsigned long saved_reg;
> >>
> >> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
> >> -		return regs->syscallno;
> >> -
> >> -	if (is_compat_task()) {
> >> -		/* AArch32 uses ip (r12) for scratch */
> >> -		saved_reg = regs->regs[12];
> >> -		regs->regs[12] = dir;
> >> -	} else {
> >> -		/*
> >> -		 * Save X7. X7 is used to denote syscall entry/exit:
> >> -		 *   X7 = 0 -> entry, = 1 -> exit
> >> -		 */
> >> -		saved_reg = regs->regs[7];
> >> -		regs->regs[7] = dir;
> >> -	}
> >> +	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
> >> +		if (is_compat_task()) {
> >> +			/* AArch32 uses ip (r12) for scratch */
> >> +			saved_reg = regs->regs[12];
> >> +			regs->regs[12] = dir;
> >> +		} else {
> >> +			/*
> >> +			 * Save X7. X7 is used to denote syscall entry/exit:
> >> +			 *   X7 = 0 -> entry, = 1 -> exit
> >> +			 */
> >> +			saved_reg = regs->regs[7];
> >> +			regs->regs[7] = dir;
> >> +		}
> >>
> >> -	if (dir)
> >> -		tracehook_report_syscall_exit(regs, 0);
> >> -	else if (tracehook_report_syscall_entry(regs))
> >> -		regs->syscallno = ~0UL;
> >> +		if (dir)
> >> +			tracehook_report_syscall_exit(regs, 0);
> >> +		else if (tracehook_report_syscall_entry(regs))
> >> +			regs->syscallno = ~0UL;
> >>
> >> -	if (is_compat_task())
> >> -		regs->regs[12] = saved_reg;
> >> -	else
> >> -		regs->regs[7] = saved_reg;
> >> +		if (is_compat_task())
> >> +			regs->regs[12] = saved_reg;
> >> +		else
> >> +			regs->regs[7] = saved_reg;
> >> +	}
> >
> > Aren't these changes (to ptrace.c) just a giant NOP?
> 
> Umm, the purpose of this big "if" is to run the code only if TIF_SYSCALL_TRACE is set,
> and to make it easy to add additional hooks, audit and ftrace, around tracehook_report_*()
> later on.

The existing code already checks TIF_SYSCALL_TRACE. I'd rather you added
this new code when it's actually nedded (e.g. when adding audit on top).

Will

Re: [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

On 02/26/2014 08:25 PM, Will Deacon wrote:
> On Wed, Feb 26, 2014 at 02:00:19AM +0000, AKASHI Takahiro wrote:
>> On 02/26/2014 12:00 AM, Will Deacon wrote:
>>> On Tue, Feb 25, 2014 at 09:14:43AM +0000, AKASHI Takahiro wrote:
>>>> Currently syscall_trace() is called only for ptrace.
>>>> With additional TIF_xx flags defined, it is now called in all the cases
>>>> of audit, ftrace and seccomp in addition to ptrace.
>>>>
>>>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>>>> Acked-by: Richard Guy Briggs <rgb@redhat.com>
>>>> ---
>>>>    arch/arm64/include/asm/thread_info.h |   13 ++++++++++
>>>>    arch/arm64/kernel/entry.S            |    5 ++--
>>>>    arch/arm64/kernel/ptrace.c           |   45 +++++++++++++++++-----------------
>>>>    3 files changed, 38 insertions(+), 25 deletions(-)
>>
>> [...]
>>
>>>> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
>>>> index 6a8928b..c70133e 100644
>>>> --- a/arch/arm64/kernel/ptrace.c
>>>> +++ b/arch/arm64/kernel/ptrace.c
>>>> @@ -1062,31 +1062,30 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>>>>    {
>>>>    	unsigned long saved_reg;
>>>>
>>>> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
>>>> -		return regs->syscallno;
>>>> -
>>>> -	if (is_compat_task()) {
>>>> -		/* AArch32 uses ip (r12) for scratch */
>>>> -		saved_reg = regs->regs[12];
>>>> -		regs->regs[12] = dir;
>>>> -	} else {
>>>> -		/*
>>>> -		 * Save X7. X7 is used to denote syscall entry/exit:
>>>> -		 *   X7 = 0 -> entry, = 1 -> exit
>>>> -		 */
>>>> -		saved_reg = regs->regs[7];
>>>> -		regs->regs[7] = dir;
>>>> -	}
>>>> +	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
>>>> +		if (is_compat_task()) {
>>>> +			/* AArch32 uses ip (r12) for scratch */
>>>> +			saved_reg = regs->regs[12];
>>>> +			regs->regs[12] = dir;
>>>> +		} else {
>>>> +			/*
>>>> +			 * Save X7. X7 is used to denote syscall entry/exit:
>>>> +			 *   X7 = 0 -> entry, = 1 -> exit
>>>> +			 */
>>>> +			saved_reg = regs->regs[7];
>>>> +			regs->regs[7] = dir;
>>>> +		}
>>>>
>>>> -	if (dir)
>>>> -		tracehook_report_syscall_exit(regs, 0);
>>>> -	else if (tracehook_report_syscall_entry(regs))
>>>> -		regs->syscallno = ~0UL;
>>>> +		if (dir)
>>>> +			tracehook_report_syscall_exit(regs, 0);
>>>> +		else if (tracehook_report_syscall_entry(regs))
>>>> +			regs->syscallno = ~0UL;
>>>>
>>>> -	if (is_compat_task())
>>>> -		regs->regs[12] = saved_reg;
>>>> -	else
>>>> -		regs->regs[7] = saved_reg;
>>>> +		if (is_compat_task())
>>>> +			regs->regs[12] = saved_reg;
>>>> +		else
>>>> +			regs->regs[7] = saved_reg;
>>>> +	}
>>>
>>> Aren't these changes (to ptrace.c) just a giant NOP?
>>
>> Umm, the purpose of this big "if" is to run the code only if TIF_SYSCALL_TRACE is set,
>> and to make it easy to add additional hooks, audit and ftrace, around tracehook_report_*()
>> later on.
>
> The existing code already checks TIF_SYSCALL_TRACE. I'd rather you added
> this new code when it's actually nedded (e.g. when adding audit on top).

* This patch is required only if you really merge my audit and/or ftrace patch.
* Putting these changes in audit patch would impose an extra (unnecessary) dependency on ftrace patch.
* Putting them both in audit and ftrace patch would cause a conflict when applying both patches.

Even so, since I don't bother you on this minor issue, I will follow your comment and make changes on:
* arm64: make a single hook to syscall_trace() for all syscall features
* arm64: Add audit support
* arm64: Add ftrace support

-Takahiro AKASHI

> Will
>

[PATCH v3 0/2] arm64: prerequisites for audit and ftrace

[AKASHI Takahiro]

This patchset contains some patches commonly used by audit and ftrace.

Patch [1/2] defines system call related TIF_* flags to add syscall_trace()
hooks, including ftrace, audit and seccomp, later.
Those features will be implemented in separate patchsets, but it's safe to
check for all TIF_* now because they can not be turned on anyway.

Patch [2/2] adds a function which returns a return value of system call.

Changes v1 -> v2:
* added a guard against TIF_SYSCALL_TRACE at tracehook_report_syscall_*()
* renamed _TIF_WORK_SYSCALL to _TIF_SYSCALL_WORK

Changes v2 -> v3:
* reverted a change in syscall_trace() in v1 [1/2]
* added "arm64: Add regs_return_value() in syscall.h" patch which was
  previously included in audit patch [2/2]

AKASHI Takahiro (2):
  arm64: make a single hook to syscall_trace() for all syscall features
  arm64: Add regs_return_value() in syscall.h

 arch/arm64/include/asm/ptrace.h      |    5 +++++
 arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
 arch/arm64/kernel/entry.S            |    5 +++--
 3 files changed, 21 insertions(+), 2 deletions(-)

-- 
1.7.9.5

[PATCH v3 1/2] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
 arch/arm64/kernel/entry.S            |    5 +++--
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..0a8b2a9 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
+ *  TIF_SYSCALL_AUDIT	- syscall auditing
+ *  TIF_SECOMP		- syscall secure computing
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
  *  TIF_NOTIFY_RESUME	- callback before returning to user
@@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
@@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 0d7b789..6d613cd 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -630,8 +630,9 @@ el0_svc_naked:					// compat entry point
 	enable_irq
 
 	get_thread_info tsk
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
-	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	tst	x16, #_TIF_SYSCALL_WORK
+	b.ne	__sys_trace
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
-- 
1.7.9.5

Re: [PATCH v3 1/2] arm64: make a single hook to syscall_trace() for all syscall features

[Will Deacon]

On Fri, Feb 28, 2014 at 05:14:24AM +0000, AKASHI Takahiro wrote:
> Currently syscall_trace() is called only for ptrace.
> With additional TIF_xx flags defined, it is now called in all the cases
> of audit, ftrace and seccomp in addition to ptrace.
> 
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

  Acked-by: Will Deacon <will.deacon@arm.com>

Will

[PATCH v3 2/2] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

[PATCH v4 0/3] arm64: prerequisites for audit and ftrace

[AKASHI Takahiro]

This patchset contains some patches commonly applied for audit and ftrace.

Patch [1/3] defines syscall trace related TIF_* flags in order to add hooks,
including ftrace, audit and seccomp, later on.  Those features will be
implemented in separate patchsets, but it's safe to check for all TIF_*
now because they can not be turned on anyway.

Patch [2/3] doesn't change a behavior but make it easy and manageable to
confirm we invoke those hooks in correct order by splitting syscall_trace().

Patch [3/3] adds a commonly used function, which returns a return value of
system call.

Changes v3 -> v4:
* added "arm64: split syscall_trace() into separate functions for enter/
  exit", which is just a preparation for adding syscall trace hooks later.

Changes v2 -> v3:
* reverted a change in syscall_trace() in v1 [1/2]
* added "arm64: Add regs_return_value() in syscall.h" patch which was
  previously included in audit patch [2/2]

Changes v1 -> v2:
* added a guard against TIF_SYSCALL_TRACE at tracehook_report_syscall_*()
* renamed _TIF_WORK_SYSCALL to _TIF_SYSCALL_WORK

AKASHI Takahiro (3):
  arm64: make a single hook to syscall_trace() for all syscall features
  arm64: split syscall_trace() into separate functions for enter/exit
  arm64: Add regs_return_value() in syscall.h

 arch/arm64/include/asm/ptrace.h      |    5 ++++
 arch/arm64/include/asm/thread_info.h |   13 +++++++++
 arch/arm64/kernel/entry.S            |   15 +++++------
 arch/arm64/kernel/ptrace.c           |   48 ++++++++++++++++++++++++++--------
 4 files changed, 62 insertions(+), 19 deletions(-)

-- 
1.7.9.5

[PATCH v4 1/3] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
 arch/arm64/kernel/entry.S            |    5 +++--
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..0a8b2a9 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
+ *  TIF_SYSCALL_AUDIT	- syscall auditing
+ *  TIF_SECOMP		- syscall secure computing
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
  *  TIF_NOTIFY_RESUME	- callback before returning to user
@@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
@@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 39ac630..f9f2cae 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
 	enable_irq
 
 	get_thread_info tsk
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
-	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	tst	x16, #_TIF_SYSCALL_WORK
+	b.ne	__sys_trace
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
-- 
1.7.9.5

Re: [PATCH v4 1/3] arm64: make a single hook to syscall_trace() for all syscall features

[Will Deacon]

On Thu, Mar 13, 2014 at 10:11:29AM +0000, AKASHI Takahiro wrote:
> Currently syscall_trace() is called only for ptrace.
> With additional TIF_xx flags defined, it is now called in all the cases
> of audit, ftrace and seccomp in addition to ptrace.
> 
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---

Acked-by: Will Deacon <will.deacon@arm.com>

Will

[PATCH v4 2/3] arm64: split syscall_trace() into separate functions for enter/exit

[AKASHI Takahiro]

As done in arm, this change makes it easy to confirm we invoke syscall
related hooks, including syscall tracepoint, audit and seccomp which would
be implemented later, in correct order. That is, undoing operations in the
opposite order on exit that they were done on entry.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/entry.S  |   10 ++++-----
 arch/arm64/kernel/ptrace.c |   48 ++++++++++++++++++++++++++++++++++----------
 2 files changed, 41 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f9f2cae..00d6eb9 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -649,9 +649,8 @@ ENDPROC(el0_svc)
 	 * switches, and waiting for our parent to respond.
 	 */
 __sys_trace:
-	mov	x1, sp
-	mov	w0, #0				// trace entry
-	bl	syscall_trace
+	mov	x0, sp
+	bl	syscall_trace_enter
 	adr	lr, __sys_trace_return		// return address
 	uxtw	scno, w0			// syscall number (possibly new)
 	mov	x1, sp				// pointer to regs
@@ -666,9 +665,8 @@ __sys_trace:
 
 __sys_trace_return:
 	str	x0, [sp]			// save returned x0
-	mov	x1, sp
-	mov	w0, #1				// trace exit
-	bl	syscall_trace
+	mov	x0, sp
+	bl	syscall_trace_exit
 	b	ret_to_user
 
 /*
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6a8928b..9993a8f 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1058,29 +1058,27 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ptrace_request(child, request, addr, data);
 }
 
-asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return regs->syscallno;
 
+	/*
+	 * A scrach register (ip(r12) on AArch32, x7 on AArch64) is
+	 * used to denote syscall entry/exit:
+	 *   0 -> entry
+	 */
 	if (is_compat_task()) {
-		/* AArch32 uses ip (r12) for scratch */
 		saved_reg = regs->regs[12];
-		regs->regs[12] = dir;
+		regs->regs[12] = 0;
 	} else {
-		/*
-		 * Save X7. X7 is used to denote syscall entry/exit:
-		 *   X7 = 0 -> entry, = 1 -> exit
-		 */
 		saved_reg = regs->regs[7];
-		regs->regs[7] = dir;
+		regs->regs[7] = 0;
 	}
 
-	if (dir)
-		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
+	if (tracehook_report_syscall_entry(regs))
 		regs->syscallno = ~0UL;
 
 	if (is_compat_task())
@@ -1090,3 +1088,31 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 
 	return regs->syscallno;
 }
+
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
+{
+	unsigned long saved_reg;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	/*
+	 * A scrach register (ip(r12) on AArch32, x7 on AArch64) is
+	 * used to denote syscall entry/exit:
+	 *   1 -> exit
+	 */
+	if (is_compat_task()) {
+		saved_reg = regs->regs[12];
+		regs->regs[12] = 1;
+	} else {
+		saved_reg = regs->regs[7];
+		regs->regs[7] = 1;
+	}
+
+	tracehook_report_syscall_exit(regs, 0);
+
+	if (is_compat_task())
+		regs->regs[12] = saved_reg;
+	else
+		regs->regs[7] = saved_reg;
+}
-- 
1.7.9.5

Re: [PATCH v4 2/3] arm64: split syscall_trace() into separate functions for enter/exit

[Will Deacon]

On Thu, Mar 13, 2014 at 10:11:30AM +0000, AKASHI Takahiro wrote:
> As done in arm, this change makes it easy to confirm we invoke syscall
> related hooks, including syscall tracepoint, audit and seccomp which would
> be implemented later, in correct order. That is, undoing operations in the
> opposite order on exit that they were done on entry.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/kernel/entry.S  |   10 ++++-----
>  arch/arm64/kernel/ptrace.c |   48 ++++++++++++++++++++++++++++++++++----------
>  2 files changed, 41 insertions(+), 17 deletions(-)

[...]

> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 6a8928b..9993a8f 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -1058,29 +1058,27 @@ long arch_ptrace(struct task_struct *child, long request,
>  	return ptrace_request(child, request, addr, data);
>  }
>  
> -asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
> +asmlinkage int syscall_trace_enter(struct pt_regs *regs)
>  {
>  	unsigned long saved_reg;
>  
>  	if (!test_thread_flag(TIF_SYSCALL_TRACE))
>  		return regs->syscallno;
>  
> +	/*
> +	 * A scrach register (ip(r12) on AArch32, x7 on AArch64) is
> +	 * used to denote syscall entry/exit:
> +	 *   0 -> entry
> +	 */

You could add an enum, like we have on ARM (ptrace_syscall_dir) for the two
directions.

>  	if (is_compat_task()) {
> -		/* AArch32 uses ip (r12) for scratch */
>  		saved_reg = regs->regs[12];
> -		regs->regs[12] = dir;
> +		regs->regs[12] = 0;
>  	} else {
> -		/*
> -		 * Save X7. X7 is used to denote syscall entry/exit:
> -		 *   X7 = 0 -> entry, = 1 -> exit
> -		 */
>  		saved_reg = regs->regs[7];
> -		regs->regs[7] = dir;
> +		regs->regs[7] = 0;

This code could also be refactored so we calculated the register number
once, then avoid the if (is_compact_task()) check all over the place.

Similarly on the exit path.

Will

Re: [PATCH v4 2/3] arm64: split syscall_trace() into separate functions for enter/exit

[AKASHI Takahiro]

On 03/14/2014 03:41 AM, Will Deacon wrote:
> On Thu, Mar 13, 2014 at 10:11:30AM +0000, AKASHI Takahiro wrote:
>> As done in arm, this change makes it easy to confirm we invoke syscall
>> related hooks, including syscall tracepoint, audit and seccomp which would
>> be implemented later, in correct order. That is, undoing operations in the
>> opposite order on exit that they were done on entry.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/kernel/entry.S  |   10 ++++-----
>>   arch/arm64/kernel/ptrace.c |   48 ++++++++++++++++++++++++++++++++++----------
>>   2 files changed, 41 insertions(+), 17 deletions(-)
>
> [...]
>
>> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
>> index 6a8928b..9993a8f 100644
>> --- a/arch/arm64/kernel/ptrace.c
>> +++ b/arch/arm64/kernel/ptrace.c
>> @@ -1058,29 +1058,27 @@ long arch_ptrace(struct task_struct *child, long request,
>>   	return ptrace_request(child, request, addr, data);
>>   }
>>
>> -asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>> +asmlinkage int syscall_trace_enter(struct pt_regs *regs)
>>   {
>>   	unsigned long saved_reg;
>>
>>   	if (!test_thread_flag(TIF_SYSCALL_TRACE))
>>   		return regs->syscallno;
>>
>> +	/*
>> +	 * A scrach register (ip(r12) on AArch32, x7 on AArch64) is
>> +	 * used to denote syscall entry/exit:
>> +	 *   0 -> entry
>> +	 */
>
> You could add an enum, like we have on ARM (ptrace_syscall_dir) for the two
> directions.
>
>>   	if (is_compat_task()) {
>> -		/* AArch32 uses ip (r12) for scratch */
>>   		saved_reg = regs->regs[12];
>> -		regs->regs[12] = dir;
>> +		regs->regs[12] = 0;
>>   	} else {
>> -		/*
>> -		 * Save X7. X7 is used to denote syscall entry/exit:
>> -		 *   X7 = 0 -> entry, = 1 -> exit
>> -		 */
>>   		saved_reg = regs->regs[7];
>> -		regs->regs[7] = dir;
>> +		regs->regs[7] = 0;
>
> This code could also be refactored so we calculated the register number
> once, then avoid the if (is_compact_task()) check all over the place.
>
> Similarly on the exit path.

OK, I will implement tracehook_report_syscall() as in arm.

-Takahiro AKASHI


> Will
>

[PATCH v4 3/3] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

[PATCH v5 0/4] arm64: prerequisites for audit and ftrace

[AKASHI Takahiro]

This patchset contains some patches commonly applied for audit and ftrace.

Patch [1/4] defines syscall trace related TIF_* flags in order to add hooks,
including ftrace, audit and seccomp, later on.  Those features will be
implemented in separate patchsets, but it's safe to check for all TIF_*
now because they can not be turned on anyway.

Patch [2/4] doesn't change a behavior but make it easy and manageable to
confirm we invoke those hooks in correct order by splitting syscall_trace().

Patch [3/4] adds a commonly used function, which returns a return value of
system call.

Patch [4/4] removes is_compat_task from asm/compat.h to avoid conflicted
definitions.

Changes v4 -> v5:
* added the following patch from my seccomp patch since it is required for
  audit and ftrace in case of !COMPAT, too. [4/4]
  "arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h"

Changes v3 -> v4:
* added "arm64: split syscall_trace() into separate functions for enter/
  exit", which is just a preparation for adding syscall trace hooks later.

Changes v2 -> v3:
* reverted a change in syscall_trace() in v1 [1/2]
* added "arm64: Add regs_return_value() in syscall.h" patch which was
  previously included in audit patch [2/2]

Changes v1 -> v2:
* added a guard against TIF_SYSCALL_TRACE at tracehook_report_syscall_*()
* renamed _TIF_WORK_SYSCALL to _TIF_SYSCALL_WORK

AKASHI Takahiro (4):
  arm64: make a single hook to syscall_trace() for all syscall features
  arm64: split syscall_trace() into separate functions for enter/exit
  arm64: Add regs_return_value() in syscall.h
  arm64: is_compat_task is defined both in asm/compat.h and
    linux/compat.h

 arch/arm64/include/asm/compat.h      |  5 ----
 arch/arm64/include/asm/ptrace.h      |  5 ++++
 arch/arm64/include/asm/thread_info.h | 13 +++++++++
 arch/arm64/kernel/entry.S            | 15 +++++------
 arch/arm64/kernel/hw_breakpoint.c    |  2 +-
 arch/arm64/kernel/process.c          |  1 +
 arch/arm64/kernel/ptrace.c           | 51 +++++++++++++++++++++---------------
 arch/arm64/kernel/signal.c           |  2 +-
 8 files changed, 58 insertions(+), 36 deletions(-)

-- 
1.8.3.2

[PATCH v5 1/4] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h | 13 +++++++++++++
 arch/arm64/kernel/entry.S            |  5 +++--
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..0a8b2a9 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
+ *  TIF_SYSCALL_AUDIT	- syscall auditing
+ *  TIF_SECOMP		- syscall secure computing
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
  *  TIF_NOTIFY_RESUME	- callback before returning to user
@@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
@@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 39ac630..f9f2cae 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
 	enable_irq
 
 	get_thread_info tsk
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
-	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	tst	x16, #_TIF_SYSCALL_WORK
+	b.ne	__sys_trace
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
-- 
1.8.3.2

[PATCH v5 2/4] arm64: split syscall_trace() into separate functions for enter/exit

[AKASHI Takahiro]

As done in arm, this change makes it easy to confirm we invoke syscall
related hooks, including syscall tracepoint, audit and seccomp which would
be implemented later, in correct order. That is, undoing operations in the
opposite order on exit that they were done on entry.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/entry.S  | 10 ++++------
 arch/arm64/kernel/ptrace.c | 50 +++++++++++++++++++++++++++-------------------
 2 files changed, 33 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f9f2cae..00d6eb9 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -649,9 +649,8 @@ ENDPROC(el0_svc)
 	 * switches, and waiting for our parent to respond.
 	 */
 __sys_trace:
-	mov	x1, sp
-	mov	w0, #0				// trace entry
-	bl	syscall_trace
+	mov	x0, sp
+	bl	syscall_trace_enter
 	adr	lr, __sys_trace_return		// return address
 	uxtw	scno, w0			// syscall number (possibly new)
 	mov	x1, sp				// pointer to regs
@@ -666,9 +665,8 @@ __sys_trace:
 
 __sys_trace_return:
 	str	x0, [sp]			// save returned x0
-	mov	x1, sp
-	mov	w0, #1				// trace exit
-	bl	syscall_trace
+	mov	x0, sp
+	bl	syscall_trace_exit
 	b	ret_to_user
 
 /*
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6a8928b..f606276 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1058,35 +1058,43 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ptrace_request(child, request, addr, data);
 }
 
-asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
+enum ptrace_syscall_dir {
+	PTRACE_SYSCALL_ENTER = 0,
+	PTRACE_SYSCALL_EXIT,
+};
+
+static void tracehook_report_syscall(struct pt_regs *regs,
+				     enum ptrace_syscall_dir dir)
 {
+	int scrach;
 	unsigned long saved_reg;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return regs->syscallno;
-
-	if (is_compat_task()) {
-		/* AArch32 uses ip (r12) for scratch */
-		saved_reg = regs->regs[12];
-		regs->regs[12] = dir;
-	} else {
-		/*
-		 * Save X7. X7 is used to denote syscall entry/exit:
-		 *   X7 = 0 -> entry, = 1 -> exit
-		 */
-		saved_reg = regs->regs[7];
-		regs->regs[7] = dir;
-	}
+	/*
+	 * A scrach register (ip(r12) on AArch32, x7 on AArch64) is
+	 * used to denote syscall entry/exit:
+	 */
+	scrach = (is_compat_task() ? 12 : 7);
+	saved_reg = regs->regs[scrach];
+	regs->regs[scrach] = dir;
 
-	if (dir)
+	if (dir == PTRACE_SYSCALL_EXIT)
 		tracehook_report_syscall_exit(regs, 0);
 	else if (tracehook_report_syscall_entry(regs))
 		regs->syscallno = ~0UL;
 
-	if (is_compat_task())
-		regs->regs[12] = saved_reg;
-	else
-		regs->regs[7] = saved_reg;
+	regs->regs[scrach] = saved_reg;
+}
+
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
 
 	return regs->syscallno;
 }
+
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
+}
-- 
1.8.3.2

Re: [PATCH v5 2/4] arm64: split syscall_trace() into separate functions for enter/exit

[Richard Guy Briggs]

On 14/03/15, AKASHI Takahiro wrote:
> As done in arm, this change makes it easy to confirm we invoke syscall
> related hooks, including syscall tracepoint, audit and seccomp which would
> be implemented later, in correct order. That is, undoing operations in the
> opposite order on exit that they were done on entry.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Minor variable mis-spelling of "scratch" noted below, but other than
that:

Acked-by: Richard Guy Briggs <rgb@redhat.com>

> ---
>  arch/arm64/kernel/entry.S  | 10 ++++------
>  arch/arm64/kernel/ptrace.c | 50 +++++++++++++++++++++++++++-------------------
>  2 files changed, 33 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index f9f2cae..00d6eb9 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -649,9 +649,8 @@ ENDPROC(el0_svc)
>  	 * switches, and waiting for our parent to respond.
>  	 */
>  __sys_trace:
> -	mov	x1, sp
> -	mov	w0, #0				// trace entry
> -	bl	syscall_trace
> +	mov	x0, sp
> +	bl	syscall_trace_enter
>  	adr	lr, __sys_trace_return		// return address
>  	uxtw	scno, w0			// syscall number (possibly new)
>  	mov	x1, sp				// pointer to regs
> @@ -666,9 +665,8 @@ __sys_trace:
>  
>  __sys_trace_return:
>  	str	x0, [sp]			// save returned x0
> -	mov	x1, sp
> -	mov	w0, #1				// trace exit
> -	bl	syscall_trace
> +	mov	x0, sp
> +	bl	syscall_trace_exit
>  	b	ret_to_user
>  
>  /*
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 6a8928b..f606276 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -1058,35 +1058,43 @@ long arch_ptrace(struct task_struct *child, long request,
>  	return ptrace_request(child, request, addr, data);
>  }
>  
> -asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
> +enum ptrace_syscall_dir {
> +	PTRACE_SYSCALL_ENTER = 0,
> +	PTRACE_SYSCALL_EXIT,
> +};
> +
> +static void tracehook_report_syscall(struct pt_regs *regs,
> +				     enum ptrace_syscall_dir dir)
>  {
> +	int scrach;

"scratch"

>  	unsigned long saved_reg;
>  
> -	if (!test_thread_flag(TIF_SYSCALL_TRACE))
> -		return regs->syscallno;
> -
> -	if (is_compat_task()) {
> -		/* AArch32 uses ip (r12) for scratch */
> -		saved_reg = regs->regs[12];
> -		regs->regs[12] = dir;
> -	} else {
> -		/*
> -		 * Save X7. X7 is used to denote syscall entry/exit:
> -		 *   X7 = 0 -> entry, = 1 -> exit
> -		 */
> -		saved_reg = regs->regs[7];
> -		regs->regs[7] = dir;
> -	}
> +	/*
> +	 * A scrach register (ip(r12) on AArch32, x7 on AArch64) is
> +	 * used to denote syscall entry/exit:
> +	 */
> +	scrach = (is_compat_task() ? 12 : 7);
> +	saved_reg = regs->regs[scrach];
> +	regs->regs[scrach] = dir;
>  
> -	if (dir)
> +	if (dir == PTRACE_SYSCALL_EXIT)
>  		tracehook_report_syscall_exit(regs, 0);
>  	else if (tracehook_report_syscall_entry(regs))
>  		regs->syscallno = ~0UL;
>  
> -	if (is_compat_task())
> -		regs->regs[12] = saved_reg;
> -	else
> -		regs->regs[7] = saved_reg;
> +	regs->regs[scrach] = saved_reg;
> +}
> +
> +asmlinkage int syscall_trace_enter(struct pt_regs *regs)
> +{
> +	if (test_thread_flag(TIF_SYSCALL_TRACE))
> +		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
>  
>  	return regs->syscallno;
>  }
> +
> +asmlinkage void syscall_trace_exit(struct pt_regs *regs)
> +{
> +	if (test_thread_flag(TIF_SYSCALL_TRACE))
> +		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
> +}
> -- 
> 1.8.3.2

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v5 2/4] arm64: split syscall_trace() into separate functions for enter/exit

[Will Deacon]

Hi Akashi,

On Sat, Mar 15, 2014 at 05:39:06AM +0000, AKASHI Takahiro wrote:
> As done in arm, this change makes it easy to confirm we invoke syscall
> related hooks, including syscall tracepoint, audit and seccomp which would
> be implemented later, in correct order. That is, undoing operations in the
> opposite order on exit that they were done on entry.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

[...]

> +static void tracehook_report_syscall(struct pt_regs *regs,
> +				     enum ptrace_syscall_dir dir)
>  {
> +	int scrach;

s/scrach/scratch/

Although, I'd rather have a variable with a more meaningful name. How about
regno?

With that,

  Acked-by: Will Deacon <will.deacon@arm.com>

Cheers,

Will

Re: [PATCH v5 2/4] arm64: split syscall_trace() into separate functions for enter/exit

[AKASHI Takahiro]

On 04/16/2014 10:27 PM, Will Deacon wrote:
> Hi Akashi,
>
> On Sat, Mar 15, 2014 at 05:39:06AM +0000, AKASHI Takahiro wrote:
>> As done in arm, this change makes it easy to confirm we invoke syscall
>> related hooks, including syscall tracepoint, audit and seccomp which would
>> be implemented later, in correct order. That is, undoing operations in the
>> opposite order on exit that they were done on entry.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>
> [...]
>
>> +static void tracehook_report_syscall(struct pt_regs *regs,
>> +				     enum ptrace_syscall_dir dir)
>>   {
>> +	int scrach;
>
> s/scrach/scratch/

I will fix it.

> Although, I'd rather have a variable with a more meaningful name. How about
> regno?

OK, I will use regno in the next revision, which I will submit soon.

> With that,
>
>    Acked-by: Will Deacon <will.deacon@arm.com>

Thank you so much,
-Takahiro AKASHI

> Cheers,
>
> Will
>

[PATCH v5 3/4] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/ptrace.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.8.3.2

[PATCH v5 4/4] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h

[AKASHI Takahiro]

Some kernel files may include both linux/compat.h and asm/compat.h directly
or indirectly. Since both header files contain is_compat_task() under
!CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail.
Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c
(do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is
implemented).

So this patch proactively
1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h
2) replaces asm/compat.h to linux/compat.h in kernel/*.c,
   but asm/compat.h is still necessary in ptrace.c and process.c because
   they use is_compat_thread().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/compat.h   | 5 -----
 arch/arm64/kernel/hw_breakpoint.c | 2 +-
 arch/arm64/kernel/process.c       | 1 +
 arch/arm64/kernel/ptrace.c        | 1 +
 arch/arm64/kernel/signal.c        | 2 +-
 5 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index fda2704..3b334f9 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -305,11 +305,6 @@ static inline int is_compat_thread(struct thread_info *thread)
 
 #else /* !CONFIG_COMPAT */
 
-static inline int is_compat_task(void)
-{
-	return 0;
-}
-
 static inline int is_compat_thread(struct thread_info *thread)
 {
 	return 0;
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index f17f581..a45e2db 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -20,6 +20,7 @@
 
 #define pr_fmt(fmt) "hw-breakpoint: " fmt
 
+#include <linux/compat.h>
 #include <linux/cpu_pm.h>
 #include <linux/errno.h>
 #include <linux/hw_breakpoint.h>
@@ -27,7 +28,6 @@
 #include <linux/ptrace.h>
 #include <linux/smp.h>
 
-#include <asm/compat.h>
 #include <asm/current.h>
 #include <asm/debug-monitors.h>
 #include <asm/hw_breakpoint.h>
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 1c0a9be..fc8a387 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -20,6 +20,7 @@
 
 #include <stdarg.h>
 
+#include <linux/compat.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index f606276..c47a3ed 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 890a591..4a09989 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/compat.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/personality.h>
@@ -25,7 +26,6 @@
 #include <linux/tracehook.h>
 #include <linux/ratelimit.h>
 
-#include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
-- 
1.8.3.2

Re: [PATCH v5 4/4] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h

[Richard Guy Briggs]

On 14/03/15, AKASHI Takahiro wrote:
> Some kernel files may include both linux/compat.h and asm/compat.h directly
> or indirectly. Since both header files contain is_compat_task() under
> !CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail.
> Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c
> (do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is
> implemented).
> 
> So this patch proactively
> 1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h
> 2) replaces asm/compat.h to linux/compat.h in kernel/*.c,
>    but asm/compat.h is still necessary in ptrace.c and process.c because
>    they use is_compat_thread().
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Acked-by: Richard Guy Briggs <rgb@redhat.com>

> ---
>  arch/arm64/include/asm/compat.h   | 5 -----
>  arch/arm64/kernel/hw_breakpoint.c | 2 +-
>  arch/arm64/kernel/process.c       | 1 +
>  arch/arm64/kernel/ptrace.c        | 1 +
>  arch/arm64/kernel/signal.c        | 2 +-
>  5 files changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
> index fda2704..3b334f9 100644
> --- a/arch/arm64/include/asm/compat.h
> +++ b/arch/arm64/include/asm/compat.h
> @@ -305,11 +305,6 @@ static inline int is_compat_thread(struct thread_info *thread)
>  
>  #else /* !CONFIG_COMPAT */
>  
> -static inline int is_compat_task(void)
> -{
> -	return 0;
> -}
> -
>  static inline int is_compat_thread(struct thread_info *thread)
>  {
>  	return 0;
> diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
> index f17f581..a45e2db 100644
> --- a/arch/arm64/kernel/hw_breakpoint.c
> +++ b/arch/arm64/kernel/hw_breakpoint.c
> @@ -20,6 +20,7 @@
>  
>  #define pr_fmt(fmt) "hw-breakpoint: " fmt
>  
> +#include <linux/compat.h>
>  #include <linux/cpu_pm.h>
>  #include <linux/errno.h>
>  #include <linux/hw_breakpoint.h>
> @@ -27,7 +28,6 @@
>  #include <linux/ptrace.h>
>  #include <linux/smp.h>
>  
> -#include <asm/compat.h>
>  #include <asm/current.h>
>  #include <asm/debug-monitors.h>
>  #include <asm/hw_breakpoint.h>
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index 1c0a9be..fc8a387 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -20,6 +20,7 @@
>  
>  #include <stdarg.h>
>  
> +#include <linux/compat.h>
>  #include <linux/export.h>
>  #include <linux/sched.h>
>  #include <linux/kernel.h>
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index f606276..c47a3ed 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -19,6 +19,7 @@
>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>   */
>  
> +#include <linux/compat.h>
>  #include <linux/kernel.h>
>  #include <linux/sched.h>
>  #include <linux/mm.h>
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
> index 890a591..4a09989 100644
> --- a/arch/arm64/kernel/signal.c
> +++ b/arch/arm64/kernel/signal.c
> @@ -17,6 +17,7 @@
>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>   */
>  
> +#include <linux/compat.h>
>  #include <linux/errno.h>
>  #include <linux/signal.h>
>  #include <linux/personality.h>
> @@ -25,7 +26,6 @@
>  #include <linux/tracehook.h>
>  #include <linux/ratelimit.h>
>  
> -#include <asm/compat.h>
>  #include <asm/debug-monitors.h>
>  #include <asm/elf.h>
>  #include <asm/cacheflush.h>
> -- 
> 1.8.3.2
> 

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v5 4/4] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h

[Will Deacon]

On Sat, Mar 15, 2014 at 05:39:08AM +0000, AKASHI Takahiro wrote:
> Some kernel files may include both linux/compat.h and asm/compat.h directly
> or indirectly. Since both header files contain is_compat_task() under
> !CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail.
> Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c
> (do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is
> implemented).
> 
> So this patch proactively
> 1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h
> 2) replaces asm/compat.h to linux/compat.h in kernel/*.c,
>    but asm/compat.h is still necessary in ptrace.c and process.c because
>    they use is_compat_thread().
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

  Acked-by: Will Deacon <will.deacon@arm.com>

Will

[PATCH v6 0/4] arm64: prerequisites for audit and ftrace

[AKASHI Takahiro]

(This patchset was already acked by the maintainer along with a minor typo
fix. See below.)

This patchset contains some patches commonly applied for audit and ftrace.

Patch [1/4] defines syscall trace related TIF_* flags in order to add hooks,
including ftrace, audit and seccomp, later on.  Those features will be
implemented in separate patchsets, but it's safe to check for all TIF_*
now because they can not be turned on anyway.

Patch [2/4] doesn't change a behavior but make it easy and manageable to
confirm we invoke those hooks in correct order by splitting syscall_trace().

Patch [3/4] adds a commonly used function, which returns a return value of
system call.

Patch [4/4] removes is_compat_task from asm/compat.h to avoid conflicted
definitions.

Changes v5 -> v6:
* renamed a temporary variable's name to more meaningful one [2/4]

Changes v4 -> v5:
* added the following patch from my seccomp patch since it is required for
  audit and ftrace in case of !COMPAT, too. [4/4]
  "arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h"

Changes v3 -> v4:
* added "arm64: split syscall_trace() into separate functions for enter/
  exit", which is just a preparation for adding syscall trace hooks later.

Changes v2 -> v3:
* reverted a change in syscall_trace() in v1 [1/2]
* added "arm64: Add regs_return_value() in syscall.h" patch which was
  previously included in audit patch [2/2]

Changes v1 -> v2:
* added a guard against TIF_SYSCALL_TRACE at tracehook_report_syscall_*()
* renamed _TIF_WORK_SYSCALL to _TIF_SYSCALL_WORK

AKASHI Takahiro (4):
  arm64: make a single hook to syscall_trace() for all syscall features
  arm64: split syscall_trace() into separate functions for enter/exit
  arm64: Add regs_return_value() in syscall.h
  arm64: is_compat_task is defined both in asm/compat.h and
    linux/compat.h

 arch/arm64/include/asm/compat.h      |    5 ----
 arch/arm64/include/asm/ptrace.h      |    5 ++++
 arch/arm64/include/asm/thread_info.h |   13 +++++++++
 arch/arm64/kernel/entry.S            |   15 +++++-----
 arch/arm64/kernel/hw_breakpoint.c    |    2 +-
 arch/arm64/kernel/process.c          |    1 +
 arch/arm64/kernel/ptrace.c           |   51 ++++++++++++++++++++--------------
 arch/arm64/kernel/signal.c           |    2 +-
 8 files changed, 58 insertions(+), 36 deletions(-)

-- 
1.7.9.5

[PATCH v6 1/4] arm64: make a single hook to syscall_trace() for all syscall features

[AKASHI Takahiro]

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |   13 +++++++++++++
 arch/arm64/kernel/entry.S            |    5 +++--
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..0a8b2a9 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace
+ *  TIF_SYSCALL_AUDIT	- syscall auditing
+ *  TIF_SECOMP		- syscall secure computing
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
  *  TIF_NOTIFY_RESUME	- callback before returning to user
@@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
+#define TIF_SECCOMP		11
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
@@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 39ac630..f9f2cae 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -631,8 +631,9 @@ el0_svc_naked:					// compat entry point
 	enable_irq
 
 	get_thread_info tsk
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
-	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	tst	x16, #_TIF_SYSCALL_WORK
+	b.ne	__sys_trace
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
-- 
1.7.9.5

[PATCH v6 2/4] arm64: split syscall_trace() into separate functions for enter/exit

[AKASHI Takahiro]

As done in arm, this change makes it easy to confirm we invoke syscall
related hooks, including syscall tracepoint, audit and seccomp which would
be implemented later, in correct order. That is, undoing operations in the
opposite order on exit that they were done on entry.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/entry.S  |   10 ++++-----
 arch/arm64/kernel/ptrace.c |   50 +++++++++++++++++++++++++-------------------
 2 files changed, 33 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f9f2cae..00d6eb9 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -649,9 +649,8 @@ ENDPROC(el0_svc)
 	 * switches, and waiting for our parent to respond.
 	 */
 __sys_trace:
-	mov	x1, sp
-	mov	w0, #0				// trace entry
-	bl	syscall_trace
+	mov	x0, sp
+	bl	syscall_trace_enter
 	adr	lr, __sys_trace_return		// return address
 	uxtw	scno, w0			// syscall number (possibly new)
 	mov	x1, sp				// pointer to regs
@@ -666,9 +665,8 @@ __sys_trace:
 
 __sys_trace_return:
 	str	x0, [sp]			// save returned x0
-	mov	x1, sp
-	mov	w0, #1				// trace exit
-	bl	syscall_trace
+	mov	x0, sp
+	bl	syscall_trace_exit
 	b	ret_to_user
 
 /*
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6a8928b..6d666dc 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1058,35 +1058,43 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ptrace_request(child, request, addr, data);
 }
 
-asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
+enum ptrace_syscall_dir {
+	PTRACE_SYSCALL_ENTER = 0,
+	PTRACE_SYSCALL_EXIT,
+};
+
+static void tracehook_report_syscall(struct pt_regs *regs,
+				     enum ptrace_syscall_dir dir)
 {
+	int regno;
 	unsigned long saved_reg;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return regs->syscallno;
-
-	if (is_compat_task()) {
-		/* AArch32 uses ip (r12) for scratch */
-		saved_reg = regs->regs[12];
-		regs->regs[12] = dir;
-	} else {
-		/*
-		 * Save X7. X7 is used to denote syscall entry/exit:
-		 *   X7 = 0 -> entry, = 1 -> exit
-		 */
-		saved_reg = regs->regs[7];
-		regs->regs[7] = dir;
-	}
+	/*
+	 * A scratch register (ip(r12) on AArch32, x7 on AArch64) is
+	 * used to denote syscall entry/exit:
+	 */
+	regno = (is_compat_task() ? 12 : 7);
+	saved_reg = regs->regs[regno];
+	regs->regs[regno] = dir;
 
-	if (dir)
+	if (dir == PTRACE_SYSCALL_EXIT)
 		tracehook_report_syscall_exit(regs, 0);
 	else if (tracehook_report_syscall_entry(regs))
 		regs->syscallno = ~0UL;
 
-	if (is_compat_task())
-		regs->regs[12] = saved_reg;
-	else
-		regs->regs[7] = saved_reg;
+	regs->regs[regno] = saved_reg;
+}
+
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
 
 	return regs->syscallno;
 }
+
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
+}
-- 
1.7.9.5

[PATCH v6 3/4] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index c7ba261..a429b59 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -135,6 +135,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	(!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

[PATCH v6 4/4] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h

[AKASHI Takahiro]

Some kernel files may include both linux/compat.h and asm/compat.h directly
or indirectly. Since both header files contain is_compat_task() under
!CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail.
Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c
(do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is
implemented).

So this patch proactively
1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h
2) replaces asm/compat.h to linux/compat.h in kernel/*.c,
   but asm/compat.h is still necessary in ptrace.c and process.c because
   they use is_compat_thread().

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/compat.h   |    5 -----
 arch/arm64/kernel/hw_breakpoint.c |    2 +-
 arch/arm64/kernel/process.c       |    1 +
 arch/arm64/kernel/ptrace.c        |    1 +
 arch/arm64/kernel/signal.c        |    2 +-
 5 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index e71f81f..253e33b 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -305,11 +305,6 @@ static inline int is_compat_thread(struct thread_info *thread)
 
 #else /* !CONFIG_COMPAT */
 
-static inline int is_compat_task(void)
-{
-	return 0;
-}
-
 static inline int is_compat_thread(struct thread_info *thread)
 {
 	return 0;
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index bee7897..df1cf15 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -20,6 +20,7 @@
 
 #define pr_fmt(fmt) "hw-breakpoint: " fmt
 
+#include <linux/compat.h>
 #include <linux/cpu_pm.h>
 #include <linux/errno.h>
 #include <linux/hw_breakpoint.h>
@@ -27,7 +28,6 @@
 #include <linux/ptrace.h>
 #include <linux/smp.h>
 
-#include <asm/compat.h>
 #include <asm/current.h>
 #include <asm/debug-monitors.h>
 #include <asm/hw_breakpoint.h>
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 6391485..ccc2a3e 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -20,6 +20,7 @@
 
 #include <stdarg.h>
 
+#include <linux/compat.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6d666dc..4b58e81 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 890a591..4a09989 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/compat.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/personality.h>
@@ -25,7 +26,6 @@
 #include <linux/tracehook.h>
 #include <linux/ratelimit.h>
 
-#include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
-- 
1.7.9.5

Re: [PATCH v6 0/4] arm64: prerequisites for audit and ftrace

[Catalin Marinas]

On Wed, Apr 30, 2014 at 10:51:28AM +0100, AKASHI Takahiro wrote:
> AKASHI Takahiro (4):
>   arm64: make a single hook to syscall_trace() for all syscall features
>   arm64: split syscall_trace() into separate functions for enter/exit
>   arm64: Add regs_return_value() in syscall.h
>   arm64: is_compat_task is defined both in asm/compat.h and
>     linux/compat.h

Patches picked by Will and applied to the arm64 for-next/core branch
(should appear in -next at some point).

Thanks.

-- 
Catalin

[PATCH v4 0/3] arm64: Add audit support

[AKASHI Takahiro]

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "generic compat system call audit support" patch
* "correct a type mismatch in audit_syscall_exit()" patch
   (already accepted and queued in 3.14)
* "Modify a set of system calls in audit class" patch
   (already accepted and queued in 3.14)
* "__NR_* definitions for compat syscalls" patch from Catalin
* "make a single hook to syscall_trace() for all syscall features" patch
* userspace audit tool (v2.3.2 + my patch for arm64)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
  for all syscall features"


AKASHI Takahiro (3):
  arm64: Add regs_return_value() in syscall.h
  arm64: Add audit support
  arm64: audit: Add audit hook in ptrace/syscall_trace

 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/ptrace.h  |    5 +++++
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 arch/arm64/kernel/ptrace.c       |    7 +++++++
 include/uapi/linux/audit.h       |    1 +
 5 files changed, 29 insertions(+)

-- 
1.7.9.5

[PATCH v4 1/3] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

[PATCH v4 2/3] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by Will Deacon <will.deacon@arm.com>
---
 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 include/uapi/linux/audit.h       |    1 +
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index dd4327f..a21455e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -25,6 +25,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 70ba9d4..6900183 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <linux/audit.h>
 #include <linux/err.h>
+#include <asm/compat.h>
 
 
 static inline int syscall_get_nr(struct task_struct *task,
@@ -104,4 +106,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 624df43..aa86fab 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -333,6 +333,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.7.9.5

[PATCH v4 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/ptrace.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 64ce39f..8cdba09 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1076,10 +1078,15 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 	}
 
 	if (dir) {
+		audit_syscall_exit(regs);
 		tracehook_report_syscall_exit(regs, 0);
 	} else {
 		if (tracehook_report_syscall_entry(regs))
 			regs->syscallno = ~0UL;
+		audit_syscall_entry(syscall_get_arch(current, regs),
+			(int)regs->syscallno,
+			regs->orig_x0, regs->regs[1],
+			regs->regs[2], regs->regs[3]);
 	}
 
 	if (is_compat_task())
-- 
1.7.9.5

Re: [PATCH v4 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

[Will Deacon]

On Fri, Feb 07, 2014 at 10:10:03AM +0000, AKASHI Takahiro wrote:
> This patch adds auditing functions on entry to or exit from
> every system call invocation.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/kernel/ptrace.c |    7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
> index 64ce39f..8cdba09 100644
> --- a/arch/arm64/kernel/ptrace.c
> +++ b/arch/arm64/kernel/ptrace.c
> @@ -19,6 +19,7 @@
>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>   */
>  
> +#include <linux/audit.h>
>  #include <linux/kernel.h>
>  #include <linux/sched.h>
>  #include <linux/mm.h>
> @@ -38,6 +39,7 @@
>  #include <asm/compat.h>
>  #include <asm/debug-monitors.h>
>  #include <asm/pgtable.h>
> +#include <asm/syscall.h>
>  #include <asm/traps.h>
>  #include <asm/system_misc.h>
>  
> @@ -1076,10 +1078,15 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>  	}
>  
>  	if (dir) {
> +		audit_syscall_exit(regs);
>  		tracehook_report_syscall_exit(regs, 0);
>  	} else {
>  		if (tracehook_report_syscall_entry(regs))
>  			regs->syscallno = ~0UL;
> +		audit_syscall_entry(syscall_get_arch(current, regs),
> +			(int)regs->syscallno,
> +			regs->orig_x0, regs->regs[1],
> +			regs->regs[2], regs->regs[3]);

Again, I don't think we should just lump tracehook and audit together like
this without checking the flags (see my reply to the previous patch series).

Will

Re: [PATCH v4 0/3] arm64: Add audit support

[Richard Guy Briggs]

On 14/02/07, AKASHI Takahiro wrote:
> This patchset adds system call audit support on arm64.
> Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
> are supported. Since arm64 has the exact same set of system calls
> on LE and BE, we don't care about endianness (or more specifically
> __AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).
> 
> There are some prerequisites for this patch to work correctly:
> * "generic compat system call audit support" patch
> * "correct a type mismatch in audit_syscall_exit()" patch
>    (already accepted and queued in 3.14)
> * "Modify a set of system calls in audit class" patch
>    (already accepted and queued in 3.14)
> * "__NR_* definitions for compat syscalls" patch from Catalin
> * "make a single hook to syscall_trace() for all syscall features" patch
> * userspace audit tool (v2.3.2 + my patch for arm64)
> 
> Please review them as well for better understandings.
> 
> This code was tested on both 32-bit and 64-bit LE userland 
> in the following two ways:
> 1) basic operations with auditctl/autrace
>   # auditctl -a exit,always -S openat -F path=/etc/inittab
>   # auditctl -a exit,always -F dir=/tmp -F perm=rw
>   # auditctl -a task,always
>   # autrace /bin/ls
>     by comparing output from autrace with one from strace
> 
> 2) audit-test-code (+ my workarounds for arm/arm64)
>   by running "audit-tool", "filter" and "syscalls" test categories.
> 
> Changes v1 -> v2:
> * Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
>   Please note that a required header, unistd_32.h, is automatically
>   generated from unistd32.h.
> * Refer to regs->orig_x0 instead of regs->x0 as the first argument of
>   system call in audit_syscall_entry() [6/6]
> * Include "Add regs_return_value() in syscall.h" patch [2/6],
>   which was not intentionally included in v1 because it could be added
>   by "kprobes support".
> 
> Changes v2 -> v3:
> * Remove asm/audit.h.
>   See "generic compat syscall audit support" patch v4
> * Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
> * Remove kernel/syscalls/Makefile which was used to create unistd32.h.
>   See Catalin's "Add __NR_* definitions for compat syscalls" patch
> 
> Changes v3 -> v4:
> * Modified to sync with the patch, "make a single hook to syscall_trace()
>   for all syscall features"
> 
> 
> AKASHI Takahiro (3):
>   arm64: Add regs_return_value() in syscall.h
>   arm64: Add audit support
>   arm64: audit: Add audit hook in ptrace/syscall_trace
> 
>  arch/arm64/Kconfig               |    1 +
>  arch/arm64/include/asm/ptrace.h  |    5 +++++
>  arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
>  arch/arm64/kernel/ptrace.c       |    7 +++++++
>  include/uapi/linux/audit.h       |    1 +
>  5 files changed, 29 insertions(+)

Compile and regression tested on: ppc s390 x86_64 ppc64 i686 s390x.

Acked-by: Richard Guy Briggs <rgb@redhat.com>

> -- 
> 1.7.9.5
> 
> --
> Linux-audit mailing list
> Linux-audit@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-audit

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

[PATCH v5 0/3] arm64: Add audit support

[AKASHI Takahiro]

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
* "generic compat system call audit support" patch
* "__NR_* definitions for compat syscalls" patch from Catalin
* "make a single hook to syscall_trace() for all syscall features" patch
* userspace audit tool (v2.3.2 + my patch for arm64)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
  for all syscall features"
* aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch

Changes v4 -> v5:
* rebased to 3.14-rcX
* added a guard against TIF_SYSCALL_AUDIT [3/3]
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v2 [3/3]

AKASHI Takahiro (3):
  arm64: Add regs_return_value() in syscall.h
  arm64: Add audit support
  arm64: audit: Add audit hook in ptrace/syscall_trace

 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/ptrace.h  |    5 +++++
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 arch/arm64/kernel/ptrace.c       |   11 +++++++++++
 include/uapi/linux/audit.h       |    1 +
 5 files changed, 33 insertions(+)

-- 
1.7.9.5

[PATCH v5 1/3] arm64: Add regs_return_value() in syscall.h

[AKASHI Takahiro]

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
---
 arch/arm64/include/asm/ptrace.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0e7fa49..5800ec1 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -134,6 +134,11 @@ struct pt_regs {
 #define user_stack_pointer(regs) \
 	((regs)->sp)
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
 /*
  * Are the current registers suitable for user mode? (used to maintain
  * security in signal handlers)
-- 
1.7.9.5

[PATCH v5 2/3] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
---
 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 include/uapi/linux/audit.h       |    1 +
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 27bbcfc..aa47548 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -25,6 +25,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 70ba9d4..6900183 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <linux/audit.h>
 #include <linux/err.h>
+#include <asm/compat.h>
 
 
 static inline int syscall_get_nr(struct task_struct *task,
@@ -104,4 +106,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 624df43..aa86fab 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -333,6 +333,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.7.9.5

[PATCH v5 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
---
 arch/arm64/kernel/ptrace.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index c70133e..d4ce70e 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1062,6 +1064,9 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
+	if (dir && test_thread_flag(TIF_SYSCALL_AUDIT))
+		audit_syscall_exit(regs);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		if (is_compat_task()) {
 			/* AArch32 uses ip (r12) for scratch */
@@ -1087,5 +1092,11 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 			regs->regs[7] = saved_reg;
 	}
 
+	if (!dir && test_thread_flag(TIF_SYSCALL_AUDIT))
+		audit_syscall_entry(syscall_get_arch(current, regs),
+			(int)regs->syscallno,
+			regs->orig_x0, regs->regs[1],
+			regs->regs[2], regs->regs[3]);
+
 	return regs->syscallno;
 }
-- 
1.7.9.5

[PATCH v6 0/2] arm64: Add audit support

[AKASHI Takahiro]

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
* "generic compat system call audit support" patch
* "__NR_* definitions for compat syscalls" patch from Catalin
* "make a single hook to syscall_trace() for all syscall features" patch
* "arm64: Add regs_return_value() in syscall.h" patch
* userspace audit tool (v2.3.2 + my patch for arm64)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
  for all syscall features"
* aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch

Changes v4 -> v5:
* rebased to 3.14-rcX
* added a guard against TIF_SYSCALL_AUDIT [3/3]
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v2 [3/3]

Changes v5 -> v6:
* removed and put "arm64: Add regs_return_value() in syscall.h" patch into
  a separate set
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v3 [1/2]

AKASHI Takahiro (2):
  arm64: Add audit support
  arm64: audit: Add audit hook in ptrace/syscall_trace

 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++
 arch/arm64/kernel/ptrace.c       |   54 ++++++++++++++++++++++----------------
 include/uapi/linux/audit.h       |    1 +
 4 files changed, 49 insertions(+), 22 deletions(-)

-- 
1.7.9.5

[PATCH v6 1/2] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 include/uapi/linux/audit.h       |    1 +
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 27bbcfc..aa47548 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -25,6 +25,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 70ba9d4..6900183 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <linux/audit.h>
 #include <linux/err.h>
+#include <asm/compat.h>
 
 
 static inline int syscall_get_nr(struct task_struct *task,
@@ -104,4 +106,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 624df43..aa86fab 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -333,6 +333,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.7.9.5

Re: [PATCH v6 1/2] arm64: Add audit support

[Richard Guy Briggs]

On 14/02/28, AKASHI Takahiro wrote:
> On AArch64, audit is supported through generic lib/audit.c and
> compat_audit.c, and so this patch adds arch specific definitions required.
> 
> Acked-by Will Deacon <will.deacon@arm.com>
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/Kconfig               |    1 +
>  arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
>  include/uapi/linux/audit.h       |    1 +
>  3 files changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 27bbcfc..aa47548 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -25,6 +25,7 @@ config ARM64
>  	select GENERIC_STRNLEN_USER
>  	select GENERIC_TIME_VSYSCALL
>  	select HARDIRQS_SW_RESEND
> +	select HAVE_ARCH_AUDITSYSCALL
>  	select HAVE_ARCH_JUMP_LABEL
>  	select HAVE_ARCH_TRACEHOOK
>  	select HAVE_DEBUG_BUGVERBOSE
> diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
> index 70ba9d4..6900183 100644
> --- a/arch/arm64/include/asm/syscall.h
> +++ b/arch/arm64/include/asm/syscall.h
> @@ -16,7 +16,9 @@
>  #ifndef __ASM_SYSCALL_H
>  #define __ASM_SYSCALL_H
>  
> +#include <linux/audit.h>

This could be changed to <uapi/linux/audit.h> to pick up the
AUDIT_ARCH_* definitions needed and not any of the audit kernel
funcitons.

>  #include <linux/err.h>
> +#include <asm/compat.h>
>  
>  
>  static inline int syscall_get_nr(struct task_struct *task,
> @@ -104,4 +106,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
>  	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
>  }
>  
> +/*
> + * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
> + * AArch64 has the same system calls both on little- and big- endian.
> + */
> +static inline int syscall_get_arch(struct task_struct *task,
> +				   struct pt_regs *regs)
> +{
> +	if (is_compat_thread(task_thread_info(task)))
> +		return AUDIT_ARCH_ARM;
> +
> +	return AUDIT_ARCH_AARCH64;
> +}
> +
>  #endif	/* __ASM_SYSCALL_H */
> diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
> index 624df43..aa86fab 100644
> --- a/include/uapi/linux/audit.h
> +++ b/include/uapi/linux/audit.h
> @@ -333,6 +333,7 @@ enum {
>  /* distinguish syscall tables */
>  #define __AUDIT_ARCH_64BIT 0x80000000
>  #define __AUDIT_ARCH_LE	   0x40000000
> +#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>  #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>  #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
>  #define AUDIT_ARCH_ARMEB	(EM_ARM)
> -- 
> 1.7.9.5
> 

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v6 1/2] arm64: Add audit support

[AKASHI Takahiro]

On 03/05/2014 11:50 AM, Richard Guy Briggs wrote:
> On 14/02/28, AKASHI Takahiro wrote:
>> On AArch64, audit is supported through generic lib/audit.c and
>> compat_audit.c, and so this patch adds arch specific definitions required.
>>
>> Acked-by Will Deacon <will.deacon@arm.com>
>> Acked-by: Richard Guy Briggs <rgb@redhat.com>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/Kconfig               |    1 +
>>   arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
>>   include/uapi/linux/audit.h       |    1 +
>>   3 files changed, 17 insertions(+)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 27bbcfc..aa47548 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -25,6 +25,7 @@ config ARM64
>>   	select GENERIC_STRNLEN_USER
>>   	select GENERIC_TIME_VSYSCALL
>>   	select HARDIRQS_SW_RESEND
>> +	select HAVE_ARCH_AUDITSYSCALL
>>   	select HAVE_ARCH_JUMP_LABEL
>>   	select HAVE_ARCH_TRACEHOOK
>>   	select HAVE_DEBUG_BUGVERBOSE
>> diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
>> index 70ba9d4..6900183 100644
>> --- a/arch/arm64/include/asm/syscall.h
>> +++ b/arch/arm64/include/asm/syscall.h
>> @@ -16,7 +16,9 @@
>>   #ifndef __ASM_SYSCALL_H
>>   #define __ASM_SYSCALL_H
>>
>> +#include <linux/audit.h>
>
> This could be changed to <uapi/linux/audit.h> to pick up the
> AUDIT_ARCH_* definitions needed and not any of the audit kernel
> funcitons.

I will fix it in the next version.

Thank you,
-Takahiro AKASHI

>>   #include <linux/err.h>
>> +#include <asm/compat.h>
>>
>>
>>   static inline int syscall_get_nr(struct task_struct *task,
>> @@ -104,4 +106,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
>>   	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
>>   }
>>
>> +/*
>> + * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
>> + * AArch64 has the same system calls both on little- and big- endian.
>> + */
>> +static inline int syscall_get_arch(struct task_struct *task,
>> +				   struct pt_regs *regs)
>> +{
>> +	if (is_compat_thread(task_thread_info(task)))
>> +		return AUDIT_ARCH_ARM;
>> +
>> +	return AUDIT_ARCH_AARCH64;
>> +}
>> +
>>   #endif	/* __ASM_SYSCALL_H */
>> diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
>> index 624df43..aa86fab 100644
>> --- a/include/uapi/linux/audit.h
>> +++ b/include/uapi/linux/audit.h
>> @@ -333,6 +333,7 @@ enum {
>>   /* distinguish syscall tables */
>>   #define __AUDIT_ARCH_64BIT 0x80000000
>>   #define __AUDIT_ARCH_LE	   0x40000000
>> +#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>>   #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
>>   #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
>>   #define AUDIT_ARCH_ARMEB	(EM_ARM)
>> --
>> 1.7.9.5
>>
>
> - RGB
>
> --
> Richard Guy Briggs <rbriggs@redhat.com>
> Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
> Remote, Ottawa, Canada
> Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545
>

[PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/ptrace.c |   54 ++++++++++++++++++++++++++------------------
 1 file changed, 32 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6a8928b..d4ce70e 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1062,31 +1064,39 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return regs->syscallno;
+	if (dir && test_thread_flag(TIF_SYSCALL_AUDIT))
+		audit_syscall_exit(regs);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (is_compat_task()) {
+			/* AArch32 uses ip (r12) for scratch */
+			saved_reg = regs->regs[12];
+			regs->regs[12] = dir;
+		} else {
+			/*
+			 * Save X7. X7 is used to denote syscall entry/exit:
+			 *   X7 = 0 -> entry, = 1 -> exit
+			 */
+			saved_reg = regs->regs[7];
+			regs->regs[7] = dir;
+		}
 
-	if (is_compat_task()) {
-		/* AArch32 uses ip (r12) for scratch */
-		saved_reg = regs->regs[12];
-		regs->regs[12] = dir;
-	} else {
-		/*
-		 * Save X7. X7 is used to denote syscall entry/exit:
-		 *   X7 = 0 -> entry, = 1 -> exit
-		 */
-		saved_reg = regs->regs[7];
-		regs->regs[7] = dir;
-	}
+		if (dir)
+			tracehook_report_syscall_exit(regs, 0);
+		else if (tracehook_report_syscall_entry(regs))
+			regs->syscallno = ~0UL;
 
-	if (dir)
-		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
-		regs->syscallno = ~0UL;
+		if (is_compat_task())
+			regs->regs[12] = saved_reg;
+		else
+			regs->regs[7] = saved_reg;
+	}
 
-	if (is_compat_task())
-		regs->regs[12] = saved_reg;
-	else
-		regs->regs[7] = saved_reg;
+	if (!dir && test_thread_flag(TIF_SYSCALL_AUDIT))
+		audit_syscall_entry(syscall_get_arch(current, regs),
+			(int)regs->syscallno,
+			regs->orig_x0, regs->regs[1],
+			regs->regs[2], regs->regs[3]);
 
 	return regs->syscallno;
 }
-- 
1.7.9.5

Re: [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace

[Will Deacon]

On Fri, Feb 28, 2014 at 05:17:15AM +0000, AKASHI Takahiro wrote:
> This patch adds auditing functions on entry to or exit from
> every system call invocation.
> 
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  arch/arm64/kernel/ptrace.c |   54 ++++++++++++++++++++++++++------------------
>  1 file changed, 32 insertions(+), 22 deletions(-)

I think you need to do something like I did for arch/arm/, where we have
separate trace functions for entry/exit to make sure that we invoke the
various helpers in the correct order (for example, you want to invoke all
the debug stuff *first* on entry, but *last* on exit).

Will

Re: [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace

[Richard Guy Briggs]

On 14/02/28, Will Deacon wrote:
> On Fri, Feb 28, 2014 at 05:17:15AM +0000, AKASHI Takahiro wrote:
> > This patch adds auditing functions on entry to or exit from
> > every system call invocation.
> > 
> > Acked-by: Richard Guy Briggs <rgb@redhat.com>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > ---
> >  arch/arm64/kernel/ptrace.c |   54 ++++++++++++++++++++++++++------------------
> >  1 file changed, 32 insertions(+), 22 deletions(-)
> 
> I think you need to do something like I did for arch/arm/, where we have
> separate trace functions for entry/exit to make sure that we invoke the
> various helpers in the correct order (for example, you want to invoke all
> the debug stuff *first* on entry, but *last* on exit).

I'd have to agree.  I've just had my head deep in audit_syscall_entry()
and syscall_get_arch to clean them up.  Since current is only ever fed
to syscall_get_arch() and regs is never used by syscall_get_arch(), I'm
looking at dropping both from the syscall_get_arch() args list, but
leave syscall_get_arch() as you have it for now.

> Will

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

Re: [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace

[AKASHI Takahiro]

On 03/01/2014 01:15 AM, Will Deacon wrote:
> On Fri, Feb 28, 2014 at 05:17:15AM +0000, AKASHI Takahiro wrote:
>> This patch adds auditing functions on entry to or exit from
>> every system call invocation.
>>
>> Acked-by: Richard Guy Briggs <rgb@redhat.com>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/kernel/ptrace.c |   54 ++++++++++++++++++++++++++------------------
>>   1 file changed, 32 insertions(+), 22 deletions(-)
>
> I think you need to do something like I did for arch/arm/, where we have
> separate trace functions for entry/exit  to make sure that we invoke the
> various helpers in the correct order (for example, you want to invoke all
> the debug stuff *first* on entry, but *last* on exit).
>
> Will
>

If you mean syscall_trace_enter()/exit(), I will follow your suggestion
for readability.

-Takahiro AKASHI

Re: [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace

[Richard Guy Briggs]

On 14/03/06, AKASHI Takahiro wrote:
> On 03/01/2014 01:15 AM, Will Deacon wrote:
> >On Fri, Feb 28, 2014 at 05:17:15AM +0000, AKASHI Takahiro wrote:
> >>This patch adds auditing functions on entry to or exit from
> >>every system call invocation.
> >>
> >>Acked-by: Richard Guy Briggs <rgb@redhat.com>
> >>Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> >>---
> >>  arch/arm64/kernel/ptrace.c |   54 ++++++++++++++++++++++++++------------------
> >>  1 file changed, 32 insertions(+), 22 deletions(-)
> >
> >I think you need to do something like I did for arch/arm/, where we have
> >separate trace functions for entry/exit  to make sure that we invoke the
> >various helpers in the correct order (for example, you want to invoke all
> >the debug stuff *first* on entry, but *last* on exit).
> >
> >Will
> 
> If you mean syscall_trace_enter()/exit(), I will follow your suggestion
> for readability.

It isn't so much a question of readability, but rather correctness,
undoing operations in the opposite order on exit that they were done on
entry.

> -Takahiro AKASHI

- RGB

--
Richard Guy Briggs <rbriggs@redhat.com>
Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
Remote, Ottawa, Canada
Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545

[PATCH v7 0/2] arm64: Add audit support

[AKASHI Takahiro]

(Please apply this patch after my ftrace patch to resolve some conflict
on arm64/kernel/ptrace.c, functionally it doesn't depend on ftrace though)

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
* "audit: generic compat system call audit support" patch
* "arm64: __NR_* definitions for compat syscalls" patch from Catalin
* "arm64: make a single hook to syscall_trace() for all syscall features" patch
* "arm64: split syscall_trace() into separate functions for enter/exit" patch
* "arm64: Add regs_return_value() in syscall.h" patch
* userspace audit tool (v2.3.2 + my patch for arm64)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v6 -> v7:
* changed an include file in syscall.h from <linux/audit.h> to
  <uapi/linux/audit.h> [1/2]
* aligned with the patch, "arm64: split syscall_trace() into separate
  functions for enter/exit" [2/2]

Changes v5 -> v6:
* removed and put "arm64: Add regs_return_value() in syscall.h" patch into
  a separate set
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v3 [1/2]

Changes v4 -> v5:
* rebased to 3.14-rcX
* added a guard against TIF_SYSCALL_AUDIT [3/3]
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v2 [3/3]

Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
  for all syscall features"
* aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

AKASHI Takahiro (2):
  arm64: Add audit support
  arm64: audit: Add audit hook in syscall_trace_enter/exit()

 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 arch/arm64/kernel/ptrace.c       |    7 +++++++
 include/uapi/linux/audit.h       |    1 +
 4 files changed, 24 insertions(+)

-- 
1.7.9.5

[PATCH v7 1/2] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/Kconfig               |    1 +
 arch/arm64/include/asm/syscall.h |   15 +++++++++++++++
 include/uapi/linux/audit.h       |    1 +
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b1dcdb4..7ca6799 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -25,6 +25,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_C_RECORDMCOUNT
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 383771e..ce3882f 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <uapi/linux/audit.h>
 #include <linux/err.h>
+#include <asm/compat.h>
 
 extern const void *sys_call_table[];
 
@@ -105,4 +107,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 624df43..aa86fab 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -333,6 +333,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.7.9.5

[PATCH v7 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/ptrace.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 9c52b3e..d10c637 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1091,6 +1093,9 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, regs->syscallno);
 
+	audit_syscall_entry(syscall_get_arch(current, regs), regs->syscallno,
+		regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]);
+
 	return regs->syscallno;
 }
 
@@ -1098,6 +1103,8 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
+	audit_syscall_exit(regs);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_exit(regs, regs_return_value(regs));
 
-- 
1.7.9.5

Re: [PATCH v7 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()

[Will Deacon]

On Thu, Mar 13, 2014 at 10:16:07AM +0000, AKASHI Takahiro wrote:
> This patch adds auditing functions on entry to or exit from
> every system call invocation.
> 
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Acked-by: Will Deacon <will.deacon@arm.com>

Will

[PATCH_v8 0/2] arm64: Add audit support

[AKASHI Takahiro]

(Please apply this patch after my ftrace patch to resolve some conflict
on arm64/kernel/ptrace.c, functionally it doesn't depend on ftrace though)

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
* "audit: generic compat system call audit support" patch
* "arm64: __NR_* definitions for compat syscalls" patch from Catalin
* "arm64: make a single hook to syscall_trace() for all syscall features" patch
* "arm64: split syscall_trace() into separate functions for enter/exit" patch
* "arm64: Add regs_return_value() in syscall.h" patch
* "arm64: is_compat_task is defined both in asm/compat.h and 
   linux/compat.h" patch
* userspace audit tool (v2.3.2 + my patch for arm64)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v7 -> v8:
* aligned with the change in "audit: generic compat system call audit
  support" v5 [1/2]
* aligned with the change in "arm64: split syscall_trace() into separate
  functions for enter/exit" v5 [2/2]

Changes v6 -> v7:
* changed an include file in syscall.h from <linux/audit.h> to
  <uapi/linux/audit.h> [1/2]
* aligned with the patch, "arm64: split syscall_trace() into separate
  functions for enter/exit" [2/2]

Changes v5 -> v6:
* removed and put "arm64: Add regs_return_value() in syscall.h" patch into
  a separate set
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v3 [1/2]

Changes v4 -> v5:
* rebased to 3.14-rcX
* added a guard against TIF_SYSCALL_AUDIT [3/3]
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v2 [3/3]

Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
  for all syscall features"
* aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

AKASHI Takahiro (2):
  arm64: Add audit support
  arm64: audit: Add audit hook in syscall_trace_enter/exit()

 arch/arm64/Kconfig               |  2 ++
 arch/arm64/include/asm/syscall.h | 15 +++++++++++++++
 arch/arm64/kernel/ptrace.c       |  7 +++++++
 include/uapi/linux/audit.h       |  1 +
 4 files changed, 25 insertions(+)

-- 
1.8.3.2

[PATCH_v8 1/2] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/Kconfig               |  2 ++
 arch/arm64/include/asm/syscall.h | 15 +++++++++++++++
 include/uapi/linux/audit.h       |  1 +
 3 files changed, 18 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b1dcdb4..7c1f8c7 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -9,6 +9,7 @@ config ARM64
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
+	select AUDIT_ARCH_COMPAT_GENERIC
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
@@ -25,6 +26,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_C_RECORDMCOUNT
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 383771e..ce3882f 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,7 +16,9 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <uapi/linux/audit.h>
 #include <linux/err.h>
+#include <asm/compat.h>
 
 extern const void *sys_call_table[];
 
@@ -105,4 +107,17 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 624df43..aa86fab 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -333,6 +333,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.8.3.2

[PATCH_v8 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/ptrace.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 3ee76ed..f9e1339 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -39,6 +40,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1097,11 +1099,16 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, regs->syscallno);
 
+	audit_syscall_entry(syscall_get_arch(current, regs), regs->syscallno,
+		regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]);
+
 	return regs->syscallno;
 }
 
 asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
+	audit_syscall_exit(regs);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_exit(regs, regs_return_value(regs));
 
-- 
1.8.3.2

Re: [PATCH_v8 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()

[Will Deacon]

On Sat, Mar 15, 2014 at 05:49:08AM +0000, AKASHI Takahiro wrote:
> This patch adds auditing functions on entry to or exit from
> every system call invocation.
> 
> Acked-by: Richard Guy Briggs <rgb@redhat.com>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

I think I already acked this patch.

Will

Re: [PATCH_v8 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()

[AKASHI Takahiro]

On 04/16/2014 08:30 PM, Will Deacon wrote:
> On Sat, Mar 15, 2014 at 05:49:08AM +0000, AKASHI Takahiro wrote:
>> This patch adds auditing functions on entry to or exit from
>> every system call invocation.
>>
>> Acked-by: Richard Guy Briggs <rgb@redhat.com>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>
> I think I already acked this patch.

Oh, yeah? Thanks.
-Takahiro AKASHI

> Will
>

Re: [PATCH_v8 0/2] arm64: Add audit support

[Don Dutile]

On 03/15/2014 01:49 AM, AKASHI Takahiro wrote:
> (Please apply this patch after my ftrace patch to resolve some conflict
> on arm64/kernel/ptrace.c, functionally it doesn't depend on ftrace though)
>
> This patchset adds system call audit support on arm64.
> Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
> are supported. Since arm64 has the exact same set of system calls
> on LE and BE, we don't care about endianness (or more specifically
> __AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).
>
> There are some prerequisites for this patch to work correctly:
> * "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
> * "audit: generic compat system call audit support" patch
> * "arm64: __NR_* definitions for compat syscalls" patch from Catalin
> * "arm64: make a single hook to syscall_trace() for all syscall features" patch
> * "arm64: split syscall_trace() into separate functions for enter/exit" patch
> * "arm64: Add regs_return_value() in syscall.h" patch
> * "arm64: is_compat_task is defined both in asm/compat.h and
>     linux/compat.h" patch
> * userspace audit tool (v2.3.2 + my patch for arm64)
>
and the 2/2 patch won't apply to arch/arm64/kernel/ptrace.c
without the patch from  [PATCH v7 7/7] arm64: ftrace: Add system call tracepoint;
My question: do you need all 7 patches from arm64: Add ftrace support
as well for this audit patch to work, or just this 7/7 patch ?


> Please review them as well for better understandings.
>
> This code was tested on both 32-bit and 64-bit LE userland
> in the following two ways:
> 1) basic operations with auditctl/autrace
>    # auditctl -a exit,always -S openat -F path=/etc/inittab
>    # auditctl -a exit,always -F dir=/tmp -F perm=rw
>    # auditctl -a task,always
>    # autrace /bin/ls
>      by comparing output from autrace with one from strace
>
> 2) audit-test-code (+ my workarounds for arm/arm64)
>    by running "audit-tool", "filter" and "syscalls" test categories.
>
> Changes v7 -> v8:
> * aligned with the change in "audit: generic compat system call audit
>    support" v5 [1/2]
> * aligned with the change in "arm64: split syscall_trace() into separate
>    functions for enter/exit" v5 [2/2]
>
> Changes v6 -> v7:
> * changed an include file in syscall.h from <linux/audit.h> to
>    <uapi/linux/audit.h> [1/2]
> * aligned with the patch, "arm64: split syscall_trace() into separate
>    functions for enter/exit" [2/2]
>
> Changes v5 -> v6:
> * removed and put "arm64: Add regs_return_value() in syscall.h" patch into
>    a separate set
> * aligned with the change in "arm64: make a single hook to syscall_trace()
>    for all syscall features" v3 [1/2]
>
> Changes v4 -> v5:
> * rebased to 3.14-rcX
> * added a guard against TIF_SYSCALL_AUDIT [3/3]
> * aligned with the change in "arm64: make a single hook to syscall_trace()
>    for all syscall features" v2 [3/3]
>
> Changes v3 -> v4:
> * Modified to sync with the patch, "make a single hook to syscall_trace()
>    for all syscall features"
> * aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
>
> Changes v2 -> v3:
> * Remove asm/audit.h.
>    See "generic compat syscall audit support" patch v4
> * Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
> * Remove kernel/syscalls/Makefile which was used to create unistd32.h.
>    See Catalin's "Add __NR_* definitions for compat syscalls" patch
>
> Changes v1 -> v2:
> * Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
>    Please note that a required header, unistd_32.h, is automatically
>    generated from unistd32.h.
> * Refer to regs->orig_x0 instead of regs->x0 as the first argument of
>    system call in audit_syscall_entry() [6/6]
> * Include "Add regs_return_value() in syscall.h" patch [2/6],
>    which was not intentionally included in v1 because it could be added
>    by "kprobes support".
>
> AKASHI Takahiro (2):
>    arm64: Add audit support
>    arm64: audit: Add audit hook in syscall_trace_enter/exit()
>
>   arch/arm64/Kconfig               |  2 ++
>   arch/arm64/include/asm/syscall.h | 15 +++++++++++++++
>   arch/arm64/kernel/ptrace.c       |  7 +++++++
>   include/uapi/linux/audit.h       |  1 +
>   4 files changed, 25 insertions(+)
>

Re: [PATCH_v8 0/2] arm64: Add audit support

[AKASHI Takahiro]

Hi Don,

Sorry for not responding to you soon:

On 04/12/2014 06:37 AM, Don Dutile wrote:
> On 03/15/2014 01:49 AM, AKASHI Takahiro wrote:
>> (Please apply this patch after my ftrace patch to resolve some conflict
>> on arm64/kernel/ptrace.c, functionally it doesn't depend on ftrace though)
>>
>> This patchset adds system call audit support on arm64.
>> Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
>> are supported. Since arm64 has the exact same set of system calls
>> on LE and BE, we don't care about endianness (or more specifically
>> __AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).
>>
>> There are some prerequisites for this patch to work correctly:
>> * "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
>> * "audit: generic compat system call audit support" patch
>> * "arm64: __NR_* definitions for compat syscalls" patch from Catalin
>> * "arm64: make a single hook to syscall_trace() for all syscall features" patch
>> * "arm64: split syscall_trace() into separate functions for enter/exit" patch
>> * "arm64: Add regs_return_value() in syscall.h" patch
>> * "arm64: is_compat_task is defined both in asm/compat.h and
>>     linux/compat.h" patch
>> * userspace audit tool (v2.3.2 + my patch for arm64)
>>
> and the 2/2 patch won't apply to arch/arm64/kernel/ptrace.c
> without the patch from  [PATCH v7 7/7] arm64: ftrace: Add system call tracepoint;
> My question: do you need all 7 patches from arm64: Add ftrace support
> as well for this audit patch to work, or just this 7/7 patch ?

Functionally, my audit patch should work without ftrace patchset, but as described
in ftrace's [0/7] and audit's [0/2], audit's [2/2] assumes that ftrace patchset, especially
[7/7], has been applied in order to avoid any conflict when making changes on the same
line of ptrace.c.

Thanks,
-Takahiro AKASHI

>
>> Please review them as well for better understandings.
>>
>> This code was tested on both 32-bit and 64-bit LE userland
>> in the following two ways:
>> 1) basic operations with auditctl/autrace
>>    # auditctl -a exit,always -S openat -F path=/etc/inittab
>>    # auditctl -a exit,always -F dir=/tmp -F perm=rw
>>    # auditctl -a task,always
>>    # autrace /bin/ls
>>      by comparing output from autrace with one from strace
>>
>> 2) audit-test-code (+ my workarounds for arm/arm64)
>>    by running "audit-tool", "filter" and "syscalls" test categories.
>>
>> Changes v7 -> v8:
>> * aligned with the change in "audit: generic compat system call audit
>>    support" v5 [1/2]
>> * aligned with the change in "arm64: split syscall_trace() into separate
>>    functions for enter/exit" v5 [2/2]
>>
>> Changes v6 -> v7:
>> * changed an include file in syscall.h from <linux/audit.h> to
>>    <uapi/linux/audit.h> [1/2]
>> * aligned with the patch, "arm64: split syscall_trace() into separate
>>    functions for enter/exit" [2/2]
>>
>> Changes v5 -> v6:
>> * removed and put "arm64: Add regs_return_value() in syscall.h" patch into
>>    a separate set
>> * aligned with the change in "arm64: make a single hook to syscall_trace()
>>    for all syscall features" v3 [1/2]
>>
>> Changes v4 -> v5:
>> * rebased to 3.14-rcX
>> * added a guard against TIF_SYSCALL_AUDIT [3/3]
>> * aligned with the change in "arm64: make a single hook to syscall_trace()
>>    for all syscall features" v2 [3/3]
>>
>> Changes v3 -> v4:
>> * Modified to sync with the patch, "make a single hook to syscall_trace()
>>    for all syscall features"
>> * aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
>>
>> Changes v2 -> v3:
>> * Remove asm/audit.h.
>>    See "generic compat syscall audit support" patch v4
>> * Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
>> * Remove kernel/syscalls/Makefile which was used to create unistd32.h.
>>    See Catalin's "Add __NR_* definitions for compat syscalls" patch
>>
>> Changes v1 -> v2:
>> * Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
>>    Please note that a required header, unistd_32.h, is automatically
>>    generated from unistd32.h.
>> * Refer to regs->orig_x0 instead of regs->x0 as the first argument of
>>    system call in audit_syscall_entry() [6/6]
>> * Include "Add regs_return_value() in syscall.h" patch [2/6],
>>    which was not intentionally included in v1 because it could be added
>>    by "kprobes support".
>>
>> AKASHI Takahiro (2):
>>    arm64: Add audit support
>>    arm64: audit: Add audit hook in syscall_trace_enter/exit()
>>
>>   arch/arm64/Kconfig               |  2 ++
>>   arch/arm64/include/asm/syscall.h | 15 +++++++++++++++
>>   arch/arm64/kernel/ptrace.c       |  7 +++++++
>>   include/uapi/linux/audit.h       |  1 +
>>   4 files changed, 25 insertions(+)
>>
>

Re: [PATCH_v8 0/2] arm64: Add audit support

[Don Dutile]

On 04/28/2014 05:51 AM, AKASHI Takahiro wrote:
> Hi Don,
>
> Sorry for not responding to you soon:
>
been there, done that! .. no problem..

> On 04/12/2014 06:37 AM, Don Dutile wrote:
>> On 03/15/2014 01:49 AM, AKASHI Takahiro wrote:
>>> (Please apply this patch after my ftrace patch to resolve some conflict
>>> on arm64/kernel/ptrace.c, functionally it doesn't depend on ftrace though)
>>>
>>> This patchset adds system call audit support on arm64.
>>> Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
>>> are supported. Since arm64 has the exact same set of system calls
>>> on LE and BE, we don't care about endianness (or more specifically
>>> __AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).
>>>
>>> There are some prerequisites for this patch to work correctly:
>>> * "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
>>> * "audit: generic compat system call audit support" patch
>>> * "arm64: __NR_* definitions for compat syscalls" patch from Catalin
>>> * "arm64: make a single hook to syscall_trace() for all syscall features" patch
>>> * "arm64: split syscall_trace() into separate functions for enter/exit" patch
>>> * "arm64: Add regs_return_value() in syscall.h" patch
>>> * "arm64: is_compat_task is defined both in asm/compat.h and
>>>     linux/compat.h" patch
>>> * userspace audit tool (v2.3.2 + my patch for arm64)
>>>
>> and the 2/2 patch won't apply to arch/arm64/kernel/ptrace.c
>> without the patch from  [PATCH v7 7/7] arm64: ftrace: Add system call tracepoint;
>> My question: do you need all 7 patches from arm64: Add ftrace support
>> as well for this audit patch to work, or just this 7/7 patch ?
>
> Functionally, my audit patch should work without ftrace patchset, but as described
> in ftrace's [0/7] and audit's [0/2], audit's [2/2] assumes that ftrace patchset, especially
> [7/7], has been applied in order to avoid any conflict when making changes on the same
> line of ptrace.c.
>
> Thanks,
> -Takahiro AKASHI
>
just a nit for others to see/know if they were having the same fun of
backporting these patches to work on an existing kernel w/o ftrace patch set.

>>
>>> Please review them as well for better understandings.
>>>
>>> This code was tested on both 32-bit and 64-bit LE userland
>>> in the following two ways:
>>> 1) basic operations with auditctl/autrace
>>>    # auditctl -a exit,always -S openat -F path=/etc/inittab
>>>    # auditctl -a exit,always -F dir=/tmp -F perm=rw
>>>    # auditctl -a task,always
>>>    # autrace /bin/ls
>>>      by comparing output from autrace with one from strace
>>>
>>> 2) audit-test-code (+ my workarounds for arm/arm64)
>>>    by running "audit-tool", "filter" and "syscalls" test categories.
>>>
>>> Changes v7 -> v8:
>>> * aligned with the change in "audit: generic compat system call audit
>>>    support" v5 [1/2]
>>> * aligned with the change in "arm64: split syscall_trace() into separate
>>>    functions for enter/exit" v5 [2/2]
>>>
>>> Changes v6 -> v7:
>>> * changed an include file in syscall.h from <linux/audit.h> to
>>>    <uapi/linux/audit.h> [1/2]
>>> * aligned with the patch, "arm64: split syscall_trace() into separate
>>>    functions for enter/exit" [2/2]
>>>
>>> Changes v5 -> v6:
>>> * removed and put "arm64: Add regs_return_value() in syscall.h" patch into
>>>    a separate set
>>> * aligned with the change in "arm64: make a single hook to syscall_trace()
>>>    for all syscall features" v3 [1/2]
>>>
>>> Changes v4 -> v5:
>>> * rebased to 3.14-rcX
>>> * added a guard against TIF_SYSCALL_AUDIT [3/3]
>>> * aligned with the change in "arm64: make a single hook to syscall_trace()
>>>    for all syscall features" v2 [3/3]
>>>
>>> Changes v3 -> v4:
>>> * Modified to sync with the patch, "make a single hook to syscall_trace()
>>>    for all syscall features"
>>> * aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
>>>
>>> Changes v2 -> v3:
>>> * Remove asm/audit.h.
>>>    See "generic compat syscall audit support" patch v4
>>> * Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
>>> * Remove kernel/syscalls/Makefile which was used to create unistd32.h.
>>>    See Catalin's "Add __NR_* definitions for compat syscalls" patch
>>>
>>> Changes v1 -> v2:
>>> * Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
>>>    Please note that a required header, unistd_32.h, is automatically
>>>    generated from unistd32.h.
>>> * Refer to regs->orig_x0 instead of regs->x0 as the first argument of
>>>    system call in audit_syscall_entry() [6/6]
>>> * Include "Add regs_return_value() in syscall.h" patch [2/6],
>>>    which was not intentionally included in v1 because it could be added
>>>    by "kprobes support".
>>>
>>> AKASHI Takahiro (2):
>>>    arm64: Add audit support
>>>    arm64: audit: Add audit hook in syscall_trace_enter/exit()
>>>
>>>   arch/arm64/Kconfig               |  2 ++
>>>   arch/arm64/include/asm/syscall.h | 15 +++++++++++++++
>>>   arch/arm64/kernel/ptrace.c       |  7 +++++++
>>>   include/uapi/linux/audit.h       |  1 +
>>>   4 files changed, 25 insertions(+)
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[PATCH v9 0/2] arm64: Add audit support

[AKASHI Takahiro]

(This patchset was already acked by the maintainer, but now re-submitted
since it needs to be modified due to rebase to 3.15. See below)

(Please apply this patch after my ftrace patch to resolve some conflict
on arm64/kernel/ptrace.c, functionally it doesn't depend on ftrace though)

This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).

There are some prerequisites for this patch to work correctly:
* "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
* "audit: generic compat system call audit support" patch
* "arm64: __NR_* definitions for compat syscalls" patch from Catalin
* "arm64: make a single hook to syscall_trace() for all syscall features" patch
* "arm64: split syscall_trace() into separate functions for enter/exit" patch
* "arm64: Add regs_return_value() in syscall.h" patch
* "arm64: is_compat_task is defined both in asm/compat.h and 
   linux/compat.h" patch
* userspace audit tool (v2.3.6)

Please review them as well for better understandings.

This code was tested on both 32-bit and 64-bit LE userland 
in the following two ways:
1) basic operations with auditctl/autrace
  # auditctl -a exit,always -S openat -F path=/etc/inittab
  # auditctl -a exit,always -F dir=/tmp -F perm=rw
  # auditctl -a task,always
  # autrace /bin/ls
    by comparing output from autrace with one from strace

2) audit-test-code (+ my workarounds for arm/arm64)
  by running "audit-tool", "filter" and "syscalls" test categories.

Changes v8 -> v9:
* rebased on 3.15-rc, especially due to the change of syscall_get_arch()
  interface [1,2/2]

Changes v7 -> v8:
* aligned with the change in "audit: generic compat system call audit
  support" v5 [1/2]
* aligned with the change in "arm64: split syscall_trace() into separate
  functions for enter/exit" v5 [2/2]

Changes v6 -> v7:
* changed an include file in syscall.h from <linux/audit.h> to
  <uapi/linux/audit.h> [1/2]
* aligned with the patch, "arm64: split syscall_trace() into separate
  functions for enter/exit" [2/2]

Changes v5 -> v6:
* removed and put "arm64: Add regs_return_value() in syscall.h" patch into
  a separate set
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v3 [1/2]

Changes v4 -> v5:
* rebased to 3.14-rcX
* added a guard against TIF_SYSCALL_AUDIT [3/3]
* aligned with the change in "arm64: make a single hook to syscall_trace()
  for all syscall features" v2 [3/3]

Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
  for all syscall features"
* aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch

Changes v2 -> v3:
* Remove asm/audit.h.
  See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
  See Catalin's "Add __NR_* definitions for compat syscalls" patch

Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
  Please note that a required header, unistd_32.h, is automatically
  generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
  system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
  which was not intentionally included in v1 because it could be added
  by "kprobes support".

AKASHI Takahiro (2):
  arm64: Add audit support
  arm64: audit: Add audit hook in syscall_trace_enter/exit()

 arch/arm64/Kconfig               |    2 ++
 arch/arm64/include/asm/syscall.h |   14 ++++++++++++++
 arch/arm64/kernel/ptrace.c       |    7 +++++++
 include/uapi/linux/audit.h       |    1 +
 4 files changed, 24 insertions(+)

-- 
1.7.9.5

[PATCH v9 1/2] arm64: Add audit support

[AKASHI Takahiro]

On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.

Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/Kconfig               |    2 ++
 arch/arm64/include/asm/syscall.h |   14 ++++++++++++++
 include/uapi/linux/audit.h       |    1 +
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0e9b8ce..0d3a003 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -9,6 +9,7 @@ config ARM64
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
+	select AUDIT_ARCH_COMPAT_GENERIC
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
@@ -27,6 +28,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 383771e..709a574 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -16,6 +16,8 @@
 #ifndef __ASM_SYSCALL_H
 #define __ASM_SYSCALL_H
 
+#include <uapi/linux/audit.h>
+#include <linux/compat.h>
 #include <linux/err.h>
 
 extern const void *sys_call_table[];
@@ -105,4 +107,16 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
 }
 
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(void)
+{
+	if (is_compat_task())
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
 #endif	/* __ASM_SYSCALL_H */
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 11917f7..e7df2e3 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -334,6 +334,7 @@ enum {
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_AARCH64	(EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
-- 
1.7.9.5

[PATCH v9 2/2] arm64: audit: Add audit hook in syscall_trace_enter/exit()

[AKASHI Takahiro]

This patch adds auditing functions on entry to or exit from
every system call invocation.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by Will Deacon <will.deacon@arm.com>

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/kernel/ptrace.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 0bf1955..0568dc9 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -39,6 +40,7 @@
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1097,11 +1099,16 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, regs->syscallno);
 
+	audit_syscall_entry(syscall_get_arch(), regs->syscallno,
+		regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]);
+
 	return regs->syscallno;
 }
 
 asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
+	audit_syscall_exit(regs);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_exit(regs, regs_return_value(regs));
 
-- 
1.7.9.5