* [PATCH v6] arm64: dts: qcom: sc7180: Add Display Port dt node
@ 2020-08-17 22:53 Tanmay Shah
2020-08-18 0:24 ` Stephen Boyd
0 siblings, 1 reply; 3+ messages in thread
From: Tanmay Shah @ 2020-08-17 22:53 UTC (permalink / raw)
To: swboyd
Cc: devicetree, linux-kernel, linux-arm-msm, dri-devel, freedreno,
seanpaul, robdclark, daniel, airlied, aravindh, abhinavk, khsieh,
Tanmay Shah
Add DP device node on sc7180.
Changes in v2:
- Add assigned-clocks and assigned-clock-parents
- Remove cell-index and pixel_rcg
- Change compatible to qcom,sc7180-dp
Changes in v3:
- Update commit text
- Make DP child node of MDSS
- Remove data-lanes property from SOC dts
- Disable DP node in SOC dts
- Assign DP to Port2 in MDP node
- Add MDSS AHB clock in DP device node
Changes in v4:
- Remove redundant reg-names property
- Use IRQ flag instead had hard coded value.
- Add link clock source in assigned-clocks list.
Changes in v5:
- Add OPP table and power-domains for DisplayPort
Changes in v6:
- Remove redundant IRQ flag
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 76 +++++++++++++++++++++++++++-
1 file changed, 74 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 31b9217bb5bf..bf2f2bb1aa79 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2371,6 +2371,13 @@ dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
};
};
@@ -2440,6 +2447,71 @@ dsi_phy: dsi-phy@ae94400 {
status = "disabled";
};
+
+ msm_dp: displayport-controller@ae90000 {
+ status = "disabled";
+ compatible = "qcom,sc7180-dp";
+
+ reg = <0 0x0ae90000 0 0x1400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface", "core_aux", "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+ #clock-cells = <1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&msm_dp 0>, <&msm_dp 1>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: dp-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
};
dispcc: clock-controller@af00000 {
@@ -2449,8 +2521,8 @@ dispcc: clock-controller@af00000 {
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
<&dsi_phy 1>,
- <0>,
- <0>;
+ <&msm_dp 0>,
+ <&msm_dp 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"dsi0_phy_pll_out_byteclk",
base-commit: 62975d27d647a40c58d3b96c29b911fc4f33c310
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v6] arm64: dts: qcom: sc7180: Add Display Port dt node
2020-08-17 22:53 [PATCH v6] arm64: dts: qcom: sc7180: Add Display Port dt node Tanmay Shah
@ 2020-08-18 0:24 ` Stephen Boyd
2020-08-18 3:30 ` Tanmay Shah
0 siblings, 1 reply; 3+ messages in thread
From: Stephen Boyd @ 2020-08-18 0:24 UTC (permalink / raw)
To: Tanmay Shah
Cc: devicetree, linux-kernel, linux-arm-msm, dri-devel, freedreno,
seanpaul, robdclark, daniel, airlied, aravindh, abhinavk, khsieh,
Tanmay Shah
Quoting Tanmay Shah (2020-08-17 15:53:00)
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 31b9217bb5bf..bf2f2bb1aa79 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2440,6 +2447,71 @@ dsi_phy: dsi-phy@ae94400 {
>
> status = "disabled";
> };
> +
> + msm_dp: displayport-controller@ae90000 {
This should come before dsi-phy and dsi node. It should be sorted by the
address (0xae90000).
> + status = "disabled";
> + compatible = "qcom,sc7180-dp";
> +
> + reg = <0 0x0ae90000 0 0x1400>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <12>;
> +
[...]
> };
>
> dispcc: clock-controller@af00000 {
> @@ -2449,8 +2521,8 @@ dispcc: clock-controller@af00000 {
> <&gcc GCC_DISP_GPLL0_CLK_SRC>,
> <&dsi_phy 0>,
> <&dsi_phy 1>,
> - <0>,
> - <0>;
> + <&msm_dp 0>,
> + <&msm_dp 1>;
Don't think we should apply this still because the binding will change
when the phy is split out to qmp node. Maybe just leave this part off
for now?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v6] arm64: dts: qcom: sc7180: Add Display Port dt node
2020-08-18 0:24 ` Stephen Boyd
@ 2020-08-18 3:30 ` Tanmay Shah
0 siblings, 0 replies; 3+ messages in thread
From: Tanmay Shah @ 2020-08-18 3:30 UTC (permalink / raw)
To: Stephen Boyd
Cc: devicetree, linux-kernel, linux-arm-msm, dri-devel, freedreno,
seanpaul, robdclark, daniel, airlied, aravindh, abhinavk, khsieh
On 2020-08-17 17:24, Stephen Boyd wrote:
> Quoting Tanmay Shah (2020-08-17 15:53:00)
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 31b9217bb5bf..bf2f2bb1aa79 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -2440,6 +2447,71 @@ dsi_phy: dsi-phy@ae94400 {
>>
>> status = "disabled";
>> };
>> +
>> + msm_dp: displayport-controller@ae90000 {
>
> This should come before dsi-phy and dsi node. It should be sorted by
> the
> address (0xae90000).
>
>> + status = "disabled";
>> + compatible = "qcom,sc7180-dp";
>> +
>> + reg = <0 0x0ae90000 0 0x1400>;
>> +
>> + interrupt-parent = <&mdss>;
>> + interrupts = <12>;
>> +
> [...]
>> };
>>
>> dispcc: clock-controller@af00000 {
>> @@ -2449,8 +2521,8 @@ dispcc: clock-controller@af00000 {
>> <&gcc GCC_DISP_GPLL0_CLK_SRC>,
>> <&dsi_phy 0>,
>> <&dsi_phy 1>,
>> - <0>,
>> - <0>;
>> + <&msm_dp 0>,
>> + <&msm_dp 1>;
>
> Don't think we should apply this still because the binding will change
> when the phy is split out to qmp node. Maybe just leave this part off
> for now?
Ok fine. But, that will break DP driver functionality.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-08-18 3:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-17 22:53 [PATCH v6] arm64: dts: qcom: sc7180: Add Display Port dt node Tanmay Shah
2020-08-18 0:24 ` Stephen Boyd
2020-08-18 3:30 ` Tanmay Shah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).