[3.13.y.z extended stable] Linux 3.13.11.3 stable review

[3.13.y.z extended stable] Linux 3.13.11.3 stable review

[Kamal Mostafa]

This is the start of the review cycle for the Linux 3.13.11.3 stable kernel.

This version contains 160 new patches, summarized below.  The new patches are
posted as replies to this message and also available in this git branch:

http://kernel.ubuntu.com/git?p=ubuntu/linux.git;h=linux-3.13.y-review;a=shortlog

git://kernel.ubuntu.com/ubuntu/linux.git  linux-3.13.y-review

The review period for version 3.13.11.3 will be open for the next three days.
To report a problem, please reply to the relevant follow-up patch message.

For more information about the Linux 3.13.y.z extended stable kernel version,
see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable .

 -Kamal

--
 Documentation/input/elantech.txt               |   5 +-
 arch/arc/kernel/entry.S                        |   8 +-
 arch/arm/boot/dts/tegra124.dtsi                |   8 --
 arch/arm/include/asm/div64.h                   |   2 +-
 arch/arm/kernel/machine_kexec.c                |   7 ++
 arch/arm/kvm/mmu.c                             |  15 ++--
 arch/arm/mach-pxa/include/mach/hx4700.h        |   1 +
 arch/mips/cavium-octeon/octeon-irq.c           |   2 +-
 arch/parisc/kernel/syscall_table.S             |   2 +-
 arch/powerpc/include/asm/reg.h                 |   1 +
 arch/s390/net/bpf_jit_comp.c                   |   1 -
 arch/x86/xen/spinlock.c                        |   5 +-
 drivers/acpi/ec.c                              |  21 ++---
 drivers/ata/ahci.c                             |  18 ++---
 drivers/ata/libata-core.c                      |  23 ++++--
 drivers/ata/pata_at91.c                        |  11 +--
 drivers/base/dd.c                              |  17 ++++
 drivers/base/platform.c                        |   7 +-
 drivers/clocksource/exynos_mct.c               |  12 +--
 drivers/dma/edma.c                             |   6 +-
 drivers/gpu/drm/i915/i915_irq.c                |  17 +++-
 drivers/gpu/drm/i915/intel_display.c           |  49 ++++++++----
 drivers/gpu/drm/i915/intel_drv.h               |   3 +-
 drivers/gpu/drm/nouveau/nouveau_acpi.c         |   3 -
 drivers/gpu/drm/nouveau/nouveau_display.c      |   2 +-
 drivers/gpu/drm/radeon/ci_dpm.c                |   8 ++
 drivers/gpu/drm/radeon/cik.c                   | 104 ++++++++++++++++++++++---
 drivers/gpu/drm/radeon/cik_sdma.c              |   2 +-
 drivers/gpu/drm/radeon/cikd.h                  |   9 +++
 drivers/gpu/drm/radeon/dce6_afmt.c             |  14 +++-
 drivers/gpu/drm/radeon/evergreen.c             |  28 +++++--
 drivers/gpu/drm/radeon/r600.c                  |  13 +++-
 drivers/gpu/drm/radeon/r600_dpm.c              |  35 +++++----
 drivers/gpu/drm/radeon/radeon.h                |  12 ++-
 drivers/gpu/drm/radeon/radeon_atpx_handler.c   |   9 ++-
 drivers/gpu/drm/radeon/radeon_device.c         |  19 ++---
 drivers/gpu/drm/radeon/radeon_display.c        |   4 +
 drivers/gpu/drm/radeon/radeon_drv.c            |  12 +--
 drivers/gpu/drm/radeon/radeon_family.h         |   1 +
 drivers/gpu/drm/radeon/radeon_kms.c            |  17 ++--
 drivers/gpu/drm/radeon/radeon_pm.c             |  51 +++++++-----
 drivers/gpu/drm/radeon/radeon_ucode.h          |   7 +-
 drivers/gpu/drm/radeon/radeon_uvd.c            |   4 +
 drivers/gpu/drm/radeon/si.c                    |  65 +++++++++++-----
 drivers/gpu/drm/radeon/uvd_v1_0.c              |  10 ++-
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c        |  22 ++++++
 drivers/hid/hid-core.c                         |   3 +
 drivers/hid/hid-ids.h                          |   1 +
 drivers/hid/usbhid/hid-quirks.c                |   1 +
 drivers/hv/connection.c                        |   5 +-
 drivers/iio/adc/at91_adc.c                     |  26 ++++++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c     |   7 +-
 drivers/iio/industrialio-buffer.c              |   6 +-
 drivers/iio/light/cm36651.c                    |  22 +++++-
 drivers/input/keyboard/atkbd.c                 |  29 ++++++-
 drivers/input/mouse/elantech.c                 |  26 ++++++-
 drivers/input/mouse/elantech.h                 |   1 +
 drivers/input/mouse/synaptics.c                |  50 ++++++++++++
 drivers/irqchip/irq-armada-370-xp.c            |  17 +++-
 drivers/irqchip/irq-gic.c                      |   8 +-
 drivers/md/dm-cache-target.c                   |   1 +
 drivers/misc/mei/hw-me-regs.h                  |   5 ++
 drivers/misc/mei/interrupt.c                   |   3 +-
 drivers/misc/mei/main.c                        |   3 +-
 drivers/misc/mei/pci-me.c                      |  30 +++++--
 drivers/net/ethernet/marvell/mvneta.c          |  41 ++++++++--
 drivers/net/ethernet/mellanox/mlx4/en_cq.c     |   1 -
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |   6 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |   1 -
 drivers/net/wireless/ath/ath9k/xmit.c          |   4 +-
 drivers/net/wireless/iwlwifi/iwl-7000.c        |   1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c    |   2 +-
 drivers/net/wireless/iwlwifi/pcie/drv.c        |   2 +
 drivers/net/wireless/rt2x00/rt2x00mac.c        |  22 +++---
 drivers/net/wireless/rtlwifi/rtl8188ee/trx.c   |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c    |   2 +-
 drivers/net/wireless/rtlwifi/rtl8192se/trx.c   |   6 ++
 drivers/of/irq.c                               |  26 +++++++
 drivers/of/platform.c                          |   4 +-
 drivers/s390/cio/chsc.c                        |  22 ++++--
 drivers/scsi/mpt2sas/mpt2sas_scsih.c           |   1 -
 drivers/scsi/virtio_scsi.c                     |   6 +-
 drivers/staging/rtl8188eu/core/rtw_recv.c      |  19 ++---
 drivers/staging/rtl8712/rtl871x_recv.c         |  13 ++--
 drivers/tty/hvc/hvc_console.c                  |   2 +-
 drivers/tty/serial/8250/8250_core.c            |   4 +-
 drivers/tty/serial/8250/8250_dma.c             |   9 ++-
 drivers/tty/serial/omap-serial.c               |  29 ++++---
 drivers/tty/tty_buffer.c                       |  17 +++-
 drivers/usb/class/cdc-acm.c                    |  28 +++++--
 drivers/usb/core/hcd-pci.c                     |   2 +-
 drivers/usb/gadget/zero.c                      |   2 +-
 drivers/usb/host/ehci-fsl.c                    |   3 +-
 drivers/usb/host/ohci-hub.c                    |  18 +++++
 drivers/usb/host/ohci-pci.c                    |   1 +
 drivers/usb/host/ohci.h                        |   2 +
 drivers/usb/host/xhci-pci.c                    |   2 +
 drivers/usb/host/xhci-ring.c                   |  77 +++++++++---------
 drivers/usb/host/xhci.c                        |   1 -
 drivers/usb/host/xhci.h                        |   2 -
 drivers/usb/serial/cp210x.c                    |   1 +
 drivers/usb/serial/ftdi_sio.c                  |  33 ++++++++
 drivers/usb/serial/ftdi_sio_ids.h              |  37 +++++++++
 drivers/usb/serial/io_ti.c                     |  50 ++++++++----
 drivers/usb/serial/option.c                    |  83 +++++++++++++++++++-
 drivers/usb/serial/pl2303.c                    |   3 +
 drivers/usb/serial/pl2303.h                    |   5 +-
 drivers/usb/serial/qcserial.c                  |  24 ++++++
 drivers/usb/serial/sierra.c                    |   1 -
 drivers/usb/serial/usb-serial.c                |   4 +-
 drivers/usb/serial/usb_wwan.c                  |   9 +--
 drivers/usb/storage/shuttle_usbat.c            |   2 +-
 drivers/usb/storage/unusual_devs.h             |  14 ++++
 fs/aio.c                                       |   6 +-
 fs/autofs4/root.c                              |   4 +-
 fs/btrfs/inode-map.c                           |  18 +----
 fs/cifs/cifsfs.c                               |  14 +++-
 fs/cifs/cifsglob.h                             |   8 ++
 fs/cifs/cifsproto.h                            |   3 +
 fs/cifs/file.c                                 |  31 +++++++-
 fs/cifs/misc.c                                 |  74 +++++++++++++++++-
 fs/cifs/smb1ops.c                              |  11 +++
 fs/cifs/smb2misc.c                             |  18 ++++-
 fs/cifs/smb2ops.c                              |  14 ++++
 fs/coredump.c                                  |   7 +-
 fs/dcache.c                                    |   3 +-
 fs/ext4/ext4.h                                 |  17 ----
 fs/ext4/file.c                                 |   2 +-
 fs/ext4/inode.c                                |  26 ++++++-
 fs/ext4/page-io.c                              |   5 +-
 fs/ext4/xattr.c                                |  23 +++++-
 fs/locks.c                                     |   7 +-
 fs/namei.c                                     |   6 +-
 fs/nfsd/nfs4callback.c                         |   4 +-
 fs/posix_acl.c                                 |   6 ++
 include/asm-generic/pgtable.h                  |  31 ++++++--
 include/asm-generic/word-at-a-time.h           |   8 +-
 include/linux/ftrace.h                         |   2 +
 include/linux/hyperv.h                         |   4 +-
 include/linux/interrupt.h                      |  35 ++++++++-
 include/linux/irq.h                            |   3 +-
 include/linux/libata.h                         |   1 +
 include/linux/of_irq.h                         |   5 ++
 include/linux/sock_diag.h                      |   2 +-
 init/Kconfig                                   |  24 +++---
 kernel/hrtimer.c                               |  22 ++++++
 kernel/irq/manage.c                            |  17 ++--
 kernel/module.c                                |   8 +-
 kernel/time/tick-common.c                      |   2 +-
 kernel/time/tick-sched.c                       |   2 +-
 kernel/timer.c                                 |   2 +-
 kernel/trace/ftrace.c                          |  27 +------
 mm/compaction.c                                |  41 ++++++----
 mm/huge_memory.c                               |  13 +++-
 mm/hugetlb.c                                   |   1 +
 mm/memory.c                                    |   8 +-
 mm/page-writeback.c                            |   6 +-
 net/bluetooth/hci_conn.c                       |   9 ++-
 net/bluetooth/hci_event.c                      |   6 ++
 net/core/sock_diag.c                           |   4 +-
 net/mac80211/main.c                            |   2 +
 net/mac80211/offchannel.c                      |   1 +
 net/packet/diag.c                              |   2 +-
 sound/pci/hda/patch_hdmi.c                     |   4 +-
 sound/pci/hda/patch_realtek.c                  |   7 ++
 sound/soc/soc-dapm.c                           |   1 -
 sound/usb/card.h                               |   1 +
 sound/usb/endpoint.c                           |  15 +++-
 virt/kvm/arm/vgic.c                            |   1 +
 virt/kvm/async_pf.c                            |   8 +-
 170 files changed, 1654 insertions(+), 560 deletions(-)

Aaron Sanders (1):
      USB: pl2303: add ids for Hewlett-Packard HP POS pole displays

Al Viro (1):
      fix races between __d_instantiate() and checks of dentry flags

Alan Stern (2):
      USB: fix crash during hotplug of PCI USB controller card
      USB: OHCI: fix problem with global suspend on ATI controllers

Alec Berg (1):
      iio: querying buffer scan_mask should return 0/1

Alex Deucher (14):
      drm/radeon: fix audio pin counts for DCE6+ (v2)
      drm/radeon: disable mclk dpm on R7 260X
      drm/radeon: fix runpm handling on APUs (v4)
      drm/radeon: add support for newer mc ucode on SI (v2)
      drm/radeon: add support for newer mc ucode on CI (v2)
      drm/radeon: re-enable mclk dpm on R7 260X asics
      drm/radeon/si: make sure mc ucode is loaded before checking the size
      drm/radeon/ci: make sure mc ucode is loaded before checking the size
      drm/radeon: disable dpm on rv770 by default
      drm/radeon: fix count in cik_sdma_ring_test()
      drm/radeon: properly unregister hwmon interface (v2)
      drm/radeon/pm: don't walk the crtc list before it has been initialized (v2)
      drm/radeon: fix ATPX detection on non-VGA GPUs
      drm/radeon: don't allow runpm=1 on systems with out ATPX

Alexander Gordeev (1):
      ahci: Do not receive interrupts sent by dummy ports

Alexander Usyskin (1):
      mei: ignore client writing state during cb completion

Alexandre Belloni (1):
      iio: adc: at91_adc: Repair broken platform_data support

Andrea Adami (1):
      ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO

Andrew Lutomirski (1):
      net: Fix ns_capable check in sock_diag_put_filterinfo

Anssi Hannula (1):
      ALSA: hda - hdmi: Set converter channel count even without sink

Atilla Filiz (1):
      iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference

Bartlomiej Zolnierkiewicz (1):
      pata_at91: fix ata_host_activate() failure handling

Ben Hutchings (1):
      rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()

Benjamin Tissoires (1):
      HID: core: do not scan constant input report

Bjørn Mork (7):
      usb: qcserial: add Sierra Wireless EM7355
      usb: qcserial: add Sierra Wireless MC73xx
      usb: qcserial: add Sierra Wireless MC7305/MC7355
      usb: option: add Olivetti Olicard 500
      usb: option: add Alcatel L800MA
      usb: option: add and update a number of CMOTech devices
      usb: qcserial: add a number of Dell devices

Chris Mason (1):
      mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll

Christian König (2):
      drm/radeon/uvd: use lower clocks on old UVD to boot v2
      drm/radeon: use pflip irq on R600+ v2

Christoph Hellwig (1):
      posix_acl: handle NULL ACL in posix_acl_equiv_mode

Clemens Ladisch (1):
      ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data

Colin Ian King (1):
      rtlwifi: rtl8188ee: initialize packet_beacon

Dan Williams (1):
      libata/ahci: accommodate tag ordered controllers

Daniel Vetter (2):
      drm/i915: Don't check gmch state on inherited configs
      drm/i915: Don't WARN nor handle unexpected hpd interrupts on gmch platforms

Daniele Forsi (2):
      usb: storage: shuttle_usbat: fix discs being detected twice
      USB: Nokia 5300 should be treated as unusual dev

Daniele Palmas (1):
      usb: option driver, add support for Telit UE910v2

David Milburn (1):
      ahci: do not request irq for dummy port

Denis Turischev (1):
      xhci: Switch Intel Lynx Point ports to EHCI on shutdown.

Egbert Eich (1):
      drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()

Emmanuel Grumbach (2):
      iwlwifi: add MODULE_FIRMWARE for 7265
      iwlwifi: mvm: disable beacon filtering

Eric Dumazet (1):
      coredump: fix va_list corruption

Fam Zheng (1):
      [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq

Felix Fietkau (1):
      mac80211: exclude AP_VLAN interfaces from tx power calculation

Grant Likely (1):
      drivercore: deferral race condition fix

Haibin Wang (1):
      KVM: ARM: vgic: Fix sgi dispatch problem

Hans de Goede (5):
      Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1
      xhci: For streams the css flag most be read from the stream-ctx on ep stop
      Input: synaptics - add min/max quirk for ThinkPad Edge E431
      HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S
      Input: elantech - fix touchpad initialization on Gigabyte U2442

Helge Deller (1):
      parisc: fix epoll_pwait syscall on compat kernel

Helmut Schaa (1):
      ath9k: Fix sequence number assignment for non-data frames

Hui Wang (3):
      ALSA: hda - add headset mic detect quirk for a Dell laptop
      ALSA: hda - add headset mic detect quirk for a Dell laptop
      ALSA: hda - add headset mic detect quirk for a Dell laptop

Ian Kent (1):
      autofs: fix lockref lookup

Ilia Mirkin (1):
      drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi

Jan Kara (1):
      ext4: fix jbd2 warning under heavy xattr load

Jarkko Nikula (1):
      ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrol

Jeff Layton (2):
      locks: allow __break_lease to sleep even when break_time is 0
      nfsd: set timeparms.to_maxval in setup_callback_client

Jiri Bohac (1):
      timer: Prevent overflow in apply_slack

Johan Hedberg (2):
      Bluetooth: Fix triggering BR/EDR L2CAP Connect too early
      Bluetooth: Fix redundant encryption request for reauthentication

Johan Hovold (4):
      Revert "USB: serial: add usbid for dell wwan card to sierra.c"
      USB: usb_wwan: fix handling of missing bulk endpoints
      USB: serial: fix sysfs-attribute removal deadlock
      USB: io_ti: fix firmware download on big-endian machines

Johannes Berg (1):
      mac80211: fix software remain-on-channel implementation

Julius Werner (1):
      usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb

K. Y. Srinivasan (1):
      Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts

Kailang Yang (2):
      ALSA: hda/realtek - Add support of ALC288 codec
      ALSA: hda/realtek - Add headset Mic support for Dell machine

Kazuya Mio (1):
      ext4: FIBMAP ioctl causes BUG_ON due to handle EXT_MAX_BLOCKS

Kieran Clancy (1):
      ACPI / EC: Process rather than discard events in acpi_ec_clear

Kirill A. Shutemov (1):
      thp: close race between split and zap huge pages

Konrad Rzeszutek Wilk (1):
      xen/spinlock: Don't enable them unconditionally.

Krzysztof Kozlowski (2):
      iio: cm36651: Fix i2c client leak and possible NULL pointer dereference
      clocksource: Exynos_mct: Register clock event after request_irq()

Larry Finger (4):
      staging: r8188eu: Calling rtw_get_stainfo() with a NULL sta_addr will return NULL
      staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0
      staging: r8188eu: Fix case where ethtype was never obtained and always be checked against 0
      rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbb

Leo Liu (1):
      drm/radeon: check buffer relocation offset

Leon Ma (1):
      hrtimer: Prevent remote enqueue of leftmost timers

Leon Yu (1):
      aio: fix potential leak in aio_run_iocb().

Linus Torvalds (1):
      mm: make fixup_user_fault() check the vma access rights too

Liu Hua (1):
      ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo

Loic Poulain (2):
      8250_core: Fix unwanted TX chars write
      serial: 8250: Fix thread unsafe __dma_tx_complete function

Maarten Lankhorst (1):
      drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip

Mark Salter (1):
      arm: KVM: fix possible misalignment of PGDs and bounce page

Martin K. Petersen (2):
      libata: Update queued trim blacklist for M5x0 drives
      libata: Blacklist queued trim for Crucial M500

Martin Schwidefsky (1):
      s390/bpf,jit: initialize A register if 1st insn is BPF_S_LDX_B_MSH

Matthew Wilcox (1):
      ext4: note the error in ext4_end_bio()

Mel Gorman (1):
      mm: use paravirt friendly ops for NUMA hinting ptes

Miao Xie (1):
      Btrfs: fix inode caching vs tree log

Michael Neuling (1):
      powerpc/tm: Disable IRQ in tm_recheckpoint

Michael Ulbricht (1):
      USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driver

Michael Welling (1):
      tty: serial: 8250_core.c Bug fix for Exar chips.

Michele Baldessari (1):
      USB: serial: ftdi_sio: add id for Brainboxes serial cards

Mike Snitzer (1):
      dm cache: fix writethrough mode quiescing in cache_map

Mizuma, Masayoshi (1):
      mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()

Neil Greatorex (1):
      irqchip: armada-370-xp: Fix releasing of MSIs

Nikita Yushchenko (1):
      fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6

Oleg Nesterov (1):
      KVM: async_pf: mm->mm_users can not pin apf->mm

Oren Givon (1):
      iwlwifi: add new 7265 HW IDs

Peter Foley (1):
      init/Kconfig: move the trusted keyring config option to general setup

Peter Hurley (1):
      tty: Fix lockless tty buffer race

Quentin Casasnovas (1):
      drm/radeon: memory leak on bo reservation failure. v2

Rik van Riel (2):
      mm/numa: Remove BUG_ON() in __handle_mm_fault()
      mm/page-writeback.c: fix divide by zero in pos_ratio_polynom

Rob Herring (1):
      of/irq: do irq resolution in platform_get_irq

Roger Quadros (1):
      usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1

Rusty Russell (1):
      module: remove warning about waiting module removal.

Sachin Prabhu (1):
      cifs: Wait for writebacks to complete before attempting write.

Sebastian Ott (1):
      s390/chsc: fix SEI usage on old FW levels

Sekhar Nori (1):
      dma: edma: fix incorrect SG list handling

Sheng-Liang Song (1):
      Input: atkbd - fix keyboard not working on some LG laptops

Stanislaw Gruszka (1):
      rt2x00: fix beaconing on USB

Stephen Warren (1):
      ARM: tegra: remove UART5/UARTE from tegra124.dtsi

Steven Rostedt (Red Hat) (1):
      ftrace/module: Hardcode ftrace_module_init() call into load_module()

Stuart Hayes (1):
      hrtimer: Prevent all reprogramming if hang detected

Theodore Ts'o (3):
      ext4: avoid possible overflow in ext4_map_blocks()
      ext4: move ext4_update_i_disksize() into mpage_map_and_submit_extent()
      ext4: use i_size_read in ext4_unaligned_aio()

Thomas Gleixner (3):
      genirq: Allow forcing cpu affinity of interrupts
      irqchip: Gic: Support forced affinity setting
      clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup

Thomas Hellstrom (1):
      drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2

Thomas Petazzoni (3):
      Revert "net: mvneta: fix usage as a module on RGMII configurations"
      irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
      irqchip: armada-370-xp: implement the ->check_device() msi_chip operation

Tomas Winkler (1):
      mei: me: do not load the driver if the FW doesn't support MEI interface

Tomoki Sekiyama (1):
      drivers/tty/hvc: don't free hvc_console_setup after init

Tony Lindgren (1):
      serial: omap: Fix missing pm_runtime_resume handling by simplifying code

Tristan Bruns (1):
      USB: cp210x: Add 8281 (Nanotec Plug & Drive)

Tyler Stachecki (1):
      [SCSI] mpt2sas: Don't disable device twice at suspend.

Victor A. Santos (1):
      USB: Nokia 305 should be treated as unusual dev

Vineet Gupta (1):
      ARC: !PREEMPT: Ensure Return to kernel mode is IRQ safe

Viresh Kumar (2):
      tick-common: Fix wrong check in tick_check_replacement()
      tick-sched: Check tick_nohz_enabled in tick_nohz_switch_to_nohz()

Vlastimil Babka (2):
      mm: compaction: detect when scanners meet in isolate_freepages
      mm/compaction: make isolate_freepages start at pageblock boundary

Will Deacon (1):
      word-at-a-time: avoid undefined behaviour in zero_bytemask macro

Xiangyu Lu (1):
      ARM: 8027/1: fix do_div() bug in big-endian systems

[PATCH 3.13 001/160] mm: use paravirt friendly ops for NUMA hinting ptes

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit 29c7787075c92ca8af353acd5301481e6f37082f upstream.

David Vrabel identified a regression when using automatic NUMA balancing
under Xen whereby page table entries were getting corrupted due to the
use of native PTE operations.  Quoting him

	Xen PV guest page tables require that their entries use machine
	addresses if the preset bit (_PAGE_PRESENT) is set, and (for
	successful migration) non-present PTEs must use pseudo-physical
	addresses.  This is because on migration MFNs in present PTEs are
	translated to PFNs (canonicalised) so they may be translated back
	to the new MFN in the destination domain (uncanonicalised).

	pte_mknonnuma(), pmd_mknonnuma(), pte_mknuma() and pmd_mknuma()
	set and clear the _PAGE_PRESENT bit using pte_set_flags(),
	pte_clear_flags(), etc.

	In a Xen PV guest, these functions must translate MFNs to PFNs
	when clearing _PAGE_PRESENT and translate PFNs to MFNs when setting
	_PAGE_PRESENT.

His suggested fix converted p[te|md]_[set|clear]_flags to using
paravirt-friendly ops but this is overkill.  He suggested an alternative
of using p[te|md]_modify in the NUMA page table operations but this is
does more work than necessary and would require looking up a VMA for
protections.

This patch modifies the NUMA page table operations to use paravirt
friendly operations to set/clear the flags of interest.  Unfortunately
this will take a performance hit when updating the PTEs on
CONFIG_PARAVIRT but I do not see a way around it that does not break
Xen.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Tested-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
BugLink: http://bugs.launchpad.net/bugs/1313450
Cc: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 include/asm-generic/pgtable.h | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 8e4f41d..eaa0a65 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -680,32 +680,47 @@ static inline int pmd_numa(pmd_t pmd)
 #ifndef pte_mknonnuma
 static inline pte_t pte_mknonnuma(pte_t pte)
 {
-	pte = pte_clear_flags(pte, _PAGE_NUMA);
-	return pte_set_flags(pte, _PAGE_PRESENT|_PAGE_ACCESSED);
+	pteval_t val = pte_val(pte);
+
+	val &= ~_PAGE_NUMA;
+	val |= (_PAGE_PRESENT|_PAGE_ACCESSED);
+	return __pte(val);
 }
 #endif
 
 #ifndef pmd_mknonnuma
 static inline pmd_t pmd_mknonnuma(pmd_t pmd)
 {
-	pmd = pmd_clear_flags(pmd, _PAGE_NUMA);
-	return pmd_set_flags(pmd, _PAGE_PRESENT|_PAGE_ACCESSED);
+	pmdval_t val = pmd_val(pmd);
+
+	val &= ~_PAGE_NUMA;
+	val |= (_PAGE_PRESENT|_PAGE_ACCESSED);
+
+	return __pmd(val);
 }
 #endif
 
 #ifndef pte_mknuma
 static inline pte_t pte_mknuma(pte_t pte)
 {
-	pte = pte_set_flags(pte, _PAGE_NUMA);
-	return pte_clear_flags(pte, _PAGE_PRESENT);
+	pteval_t val = pte_val(pte);
+
+	val &= ~_PAGE_PRESENT;
+	val |= _PAGE_NUMA;
+
+	return __pte(val);
 }
 #endif
 
 #ifndef pmd_mknuma
 static inline pmd_t pmd_mknuma(pmd_t pmd)
 {
-	pmd = pmd_set_flags(pmd, _PAGE_NUMA);
-	return pmd_clear_flags(pmd, _PAGE_PRESENT);
+	pmdval_t val = pmd_val(pmd);
+
+	val &= ~_PAGE_PRESENT;
+	val |= _PAGE_NUMA;
+
+	return __pmd(val);
 }
 #endif
 #else
-- 
1.9.1

[PATCH 3.13 002/160] HID: core: do not scan constant input report

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

commit e24d0d399b2fce71b627043e900ef28283850482 upstream.

The Microsoft Surface Type/Touch Cover 2 is a fancy device which advertised
itself as a multitouch device but with constant input reports.
This way, hid_scan_report() gives the group MULTITOUCH to it, but
hid-multitouch can not handle it due to the constant collection ignored
by hid-input.

To prevent such crap in the future, and while we do not fix this particular
device, make the scan_report coherent with hid-input.c, and ignore constant
input reports.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/hid/hid-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 253fe23..12f1a45 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -718,6 +718,9 @@ static int hid_scan_main(struct hid_parser *parser, struct hid_item *item)
 	case HID_MAIN_ITEM_TAG_END_COLLECTION:
 		break;
 	case HID_MAIN_ITEM_TAG_INPUT:
+		/* ignore constant inputs, they will be ignored by hid-input */
+		if (data & HID_MAIN_ITEM_CONSTANT)
+			break;
 		for (i = 0; i < parser->local.usage_index; i++)
 			hid_scan_input_usage(parser, parser->local.usage[i]);
 		break;
-- 
1.9.1

[PATCH 3.13 003/160] drm/radeon: fix audio pin counts for DCE6+ (v2)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit be0949f5eb9c8133a05cf25f108f09e85e79cd32 upstream.

There is actually quite a bit of variance based on
the asic.

v2: fix typo noticed by Jerome.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/dce6_afmt.c | 14 ++++++++++----
 drivers/gpu/drm/radeon/radeon.h    |  5 ++++-
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c
index 36e8f10..ff0001c 100644
--- a/drivers/gpu/drm/radeon/dce6_afmt.c
+++ b/drivers/gpu/drm/radeon/dce6_afmt.c
@@ -307,11 +307,17 @@ int dce6_audio_init(struct radeon_device *rdev)
 
 	rdev->audio.enabled = true;
 
-	if (ASIC_IS_DCE8(rdev))
+	if (ASIC_IS_DCE81(rdev)) /* KV: 4 streams, 7 endpoints */
+		rdev->audio.num_pins = 7;
+	else if (ASIC_IS_DCE83(rdev)) /* KB: 2 streams, 3 endpoints */
+		rdev->audio.num_pins = 3;
+	else if (ASIC_IS_DCE8(rdev)) /* BN/HW: 6 streams, 7 endpoints */
+		rdev->audio.num_pins = 7;
+	else if (ASIC_IS_DCE61(rdev)) /* TN: 4 streams, 6 endpoints */
 		rdev->audio.num_pins = 6;
-	else if (ASIC_IS_DCE61(rdev))
-		rdev->audio.num_pins = 4;
-	else
+	else if (ASIC_IS_DCE64(rdev)) /* OL: 2 streams, 2 endpoints */
+		rdev->audio.num_pins = 2;
+	else /* SI: 6 streams, 6 endpoints */
 		rdev->audio.num_pins = 6;
 
 	for (i = 0; i < rdev->audio.num_pins; i++) {
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index d307cc2..4485236 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -732,7 +732,7 @@ union radeon_irq_stat_regs {
 	struct cik_irq_stat_regs cik;
 };
 
-#define RADEON_MAX_HPD_PINS 6
+#define RADEON_MAX_HPD_PINS 7
 #define RADEON_MAX_CRTCS 6
 #define RADEON_MAX_AFMT_BLOCKS 7
 
@@ -2541,6 +2541,9 @@ void r100_pll_errata_after_index(struct radeon_device *rdev);
 #define ASIC_IS_DCE64(rdev) ((rdev->family == CHIP_OLAND))
 #define ASIC_IS_NODCE(rdev) ((rdev->family == CHIP_HAINAN))
 #define ASIC_IS_DCE8(rdev) ((rdev->family >= CHIP_BONAIRE))
+#define ASIC_IS_DCE81(rdev) ((rdev->family == CHIP_KAVERI))
+#define ASIC_IS_DCE82(rdev) ((rdev->family == CHIP_BONAIRE))
+#define ASIC_IS_DCE83(rdev) ((rdev->family == CHIP_KABINI))
 
 #define ASIC_IS_LOMBOK(rdev) ((rdev->ddev->pdev->device == 0x6849) || \
 			      (rdev->ddev->pdev->device == 0x6850) || \
-- 
1.9.1

[PATCH 3.13 004/160] mac80211: fix software remain-on-channel implementation

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 115b943a6ea12656088fa1ff6634c0d30815e55b upstream.

Jouni reported that when doing off-channel transmissions mixed
with on-channel transmissions, the on-channel ones ended up on
the off-channel in some cases.

The reason for that is that during the refactoring of the off-
channel code, I lost the part that stopped all activity and as
a consequence the on-channel frames (including data frames)
were no longer queued but would be transmitted on the temporary
channel.

Fix this by simply restoring the lost activity stop call.

Fixes: 2eb278e083549 ("mac80211: unify SW/offload remain-on-channel")
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 net/mac80211/offchannel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 0c2a294..6fb3855 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -355,6 +355,7 @@ void ieee80211_sw_roc_work(struct work_struct *work)
 		struct ieee80211_roc_work *dep;
 
 		/* start this ROC */
+		ieee80211_offchannel_stop_vifs(local);
 
 		/* switch channel etc */
 		ieee80211_recalc_idle(local);
-- 
1.9.1

[PATCH 3.13 005/160] mac80211: exclude AP_VLAN interfaces from tx power calculation

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 764152ff66f4a8be1f9d7981e542ffdaa5bd7aff upstream.

Their power value is initialized to zero. This patch fixes an issue
where the configured power drops to the minimum value when AP_VLAN
interfaces are created/removed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 net/mac80211/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 7d1c3ac..8cec1ba 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -148,6 +148,8 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		if (!rcu_access_pointer(sdata->vif.chanctx_conf))
 			continue;
+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
 		power = min(power, sdata->vif.bss_conf.txpower);
 	}
 	rcu_read_unlock();
-- 
1.9.1

[PATCH 3.13 006/160] iwlwifi: add new 7265 HW IDs

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oren Givon <oren.givon@intel.com>

commit 80f2679e589503bd6cbaaa1f9c1cd9dd7dfae032 upstream.

Add 2 new HW IDs for the 7265 series.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/iwlwifi/pcie/drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index db7c0c7..a9e3655 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -368,12 +368,14 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)},
 	{IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)},
+	{IWL_PCI_DEVICE(0x095A, 0x5102, iwl7265_n_cfg)},
 	{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)},
-- 
1.9.1

[PATCH 3.13 007/160] parisc: fix epoll_pwait syscall on compat kernel

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit ab3e55b119c9653b19ea4edffb86f04db867ac98 upstream.

This bug was detected with the libio-epoll-perl debian package where the
test case IO-Ppoll-compat.t failed.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/parisc/kernel/syscall_table.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 0c91072..10a0c2a 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -392,7 +392,7 @@
 	ENTRY_COMP(vmsplice)
 	ENTRY_COMP(move_pages)		/* 295 */
 	ENTRY_SAME(getcpu)
-	ENTRY_SAME(epoll_pwait)
+	ENTRY_COMP(epoll_pwait)
 	ENTRY_COMP(statfs64)
 	ENTRY_COMP(fstatfs64)
 	ENTRY_COMP(kexec_load)		/* 300 */
-- 
1.9.1

[PATCH 3.13 008/160] iwlwifi: add MODULE_FIRMWARE for 7265

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit 08a732f4e4a842f0101e5ea03d79e9d613ffadbe upstream.

It was missing.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 3c34a72..ee02c3b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -223,3 +223,4 @@ const struct iwl_cfg iwl7265_n_cfg = {
 
 MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
 MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
+MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
-- 
1.9.1

[PATCH 3.13 009/160] Revert "net: mvneta: fix usage as a module on RGMII configurations"

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

commit cc6ca3023f2c2bbcd062e9d4cf6afc2ba2821ada upstream.

This reverts commit e3a8786c10e75903f1269474e21fe8cb49c3a670. While
this commit allows to use the mvneta driver as a module on some
configurations, it breaks other configurations even if mvneta is used
built-in.

This breakage is due to the fact that on some RGMII platforms, the PCS
bit has to be set, and on some other platforms, it has to be
cleared. At the moment, we lack informations to know exactly the
significance of this bit (the datasheet only says "enables PCS"), and
so we can't produce a patch that will work on all platforms at this
point. And since this change is breaking the network completely for
many users, it's much better to revert it for now. We'll come back
later with a proper fix that takes into account all platforms.

Basically:

 * Armada XP GP is configured as RGMII-ID, and needs the PCS bit to be
   set.
 * Armada 370 Mirabox is configured as RGMII-ID, and needs the PCS bit
   to be cleared.

And at the moment, we don't know how to make the distinction between
those two cases. One hint is that the Armada XP GP appears in fact to
be using a QSGMII connection with the PHY (Quad-SGMII), but
configuring it as SGMII doesn't work, while RGMII-ID works. This needs
more investigation, but in the mean time, let's unbreak the network
for all those users.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Arnaud Ebalard <arno@natisbad.org>
Reported-by: Alexander Reuter <Alexander.Reuter@gmx.net>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=73401
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 41 ++++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index bb2021e..d7aa22a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -88,9 +88,8 @@
 #define      MVNETA_TX_IN_PRGRS                  BIT(1)
 #define      MVNETA_TX_FIFO_EMPTY                BIT(8)
 #define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
-#define MVNETA_SERDES_CFG			 0x24A0
+#define MVNETA_SGMII_SERDES_CFG			 0x24A0
 #define      MVNETA_SGMII_SERDES_PROTO		 0x0cc7
-#define      MVNETA_RGMII_SERDES_PROTO		 0x0667
 #define MVNETA_TYPE_PRIO                         0x24bc
 #define      MVNETA_FORCE_UNI                    BIT(21)
 #define MVNETA_TXQ_CMD_1                         0x24e4
@@ -707,6 +706,35 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp,
 	mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
 }
 
+
+
+/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */
+static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
+{
+	u32  val;
+
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+
+	if (enable)
+		val |= MVNETA_GMAC2_PORT_RGMII;
+	else
+		val &= ~MVNETA_GMAC2_PORT_RGMII;
+
+	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+}
+
+/* Config SGMII port */
+static void mvneta_port_sgmii_config(struct mvneta_port *pp)
+{
+	u32 val;
+
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+	val |= MVNETA_GMAC2_PCS_ENABLE;
+	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+
+	mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+}
+
 /* Start the Ethernet port RX and TX activity */
 static void mvneta_port_up(struct mvneta_port *pp)
 {
@@ -2701,15 +2729,12 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 	mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
 
 	if (phy_mode == PHY_INTERFACE_MODE_SGMII)
-		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
-	else
-		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO);
+		mvneta_port_sgmii_config(pp);
 
-	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-
-	val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+	mvneta_gmac_rgmii_set(pp, 1);
 
 	/* Cancel Port Reset */
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
 	val &= ~MVNETA_GMAC2_PORT_RESET;
 	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
 
-- 
1.9.1

[PATCH 3.13 010/160] dma: edma: fix incorrect SG list handling

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sekhar Nori <nsekhar@ti.com>

commit 5fc68a6cad658e45dca3e0a6607df3a8e5df4ef9 upstream.

The code to handle any length SG lists calls edma_resume()
even before edma_start() is called. This is incorrect
because edma_resume() enables edma events on the channel
after which CPU (in edma_start) cannot clear posted
events by writing to ECR (per the EDMA user's guide).

Because of this EDMA transfers fail to start if due
to some reason there is a pending EDMA event registered
even before EDMA transfers are started. This can happen if
an EDMA event is a byproduct of device initialization.

Fix this by calling edma_resume() only if it is not the
first batch of MAX_NR_SG elements.

Without this patch, MMC/SD fails to function on DA850 EVM
with DMA. The behaviour is triggered by specific IP and
this can explain why the issue was not reported before
(example with MMC/SD on AM335x).

Tested on DA850 EVM and AM335x EVM-SK using MMC/SD card.

Cc: Joel Fernandes <joelf@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Tested-by: Jon Ringle <jringle@gridpoint.com>
Tested-by: Alexander Holler <holler@ahsoftware.de>
Reported-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/dma/edma.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 2539ea0..037443c 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -182,11 +182,13 @@ static void edma_execute(struct edma_chan *echan)
 				  echan->ecc->dummy_slot);
 	}
 
-	edma_resume(echan->ch_num);
-
 	if (edesc->processed <= MAX_NR_SG) {
 		dev_dbg(dev, "first transfer starting %d\n", echan->ch_num);
 		edma_start(echan->ch_num);
+	} else {
+		dev_dbg(dev, "chan: %d: completed %d elements, resuming\n",
+			echan->ch_num, edesc->processed);
+		edma_resume(echan->ch_num);
 	}
 
 	/*
-- 
1.9.1

[PATCH 3.13 011/160] ALSA: hda/realtek - Add support of ALC288 codec

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kailang Yang <kailang@realtek.com>

commit 7c66593286bcd153e4868383e675673a27071bd5 upstream.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/pci/hda/patch_realtek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ad45ce4..93b95b8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4648,6 +4648,7 @@ static int patch_alc269(struct hda_codec *codec)
 		spec->codec_variant = ALC269_TYPE_ALC285;
 		break;
 	case 0x10ec0286:
+	case 0x10ec0288:
 		spec->codec_variant = ALC269_TYPE_ALC286;
 		break;
 	case 0x10ec0255:
@@ -5454,6 +5455,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = {
 	{ .id = 0x10ec0284, .name = "ALC284", .patch = patch_alc269 },
 	{ .id = 0x10ec0285, .name = "ALC285", .patch = patch_alc269 },
 	{ .id = 0x10ec0286, .name = "ALC286", .patch = patch_alc269 },
+	{ .id = 0x10ec0288, .name = "ALC288", .patch = patch_alc269 },
 	{ .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 },
 	{ .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 },
 	{ .id = 0x10ec0293, .name = "ALC293", .patch = patch_alc269 },
-- 
1.9.1

[PATCH 3.13 012/160] xen/spinlock: Don't enable them unconditionally.

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit e0fc17a936334c08b2729fff87168c03fdecf5b6 upstream.

The git commit a945928ea2709bc0e8e8165d33aed855a0110279
('xen: Do not enable spinlocks before jump_label_init() has executed')
was added to deal with the jump machinery. Earlier the code
that turned on the jump label was only called by Xen specific
functions. But now that it had been moved to the initcall machinery
it gets called on Xen, KVM, and baremetal - ouch!. And the detection
machinery to only call it on Xen wasn't remembered in the heat
of merge window excitement.

This means that the slowpath is enabled on baremetal while it should
not be.

Reported-by: Waiman Long <waiman.long@hp.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/x86/xen/spinlock.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 0e36cde..37c6970 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -274,7 +274,7 @@ void __init xen_init_spinlocks(void)
 		printk(KERN_DEBUG "xen: PV spinlocks disabled\n");
 		return;
 	}
-
+	printk(KERN_DEBUG "xen: PV spinlocks enabled\n");
 	pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(xen_lock_spinning);
 	pv_lock_ops.unlock_kick = xen_unlock_kick;
 }
@@ -290,6 +290,9 @@ static __init int xen_init_spinlocks_jump(void)
 	if (!xen_pvspin)
 		return 0;
 
+	if (!xen_domain())
+		return 0;
+
 	static_key_slow_inc(&paravirt_ticketlocks_enabled);
 	return 0;
 }
-- 
1.9.1

[PATCH 3.13 013/160] tick-common: Fix wrong check in tick_check_replacement()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 521c42990e9d561ed5ed9f501f07639d0512b3c9 upstream.

tick_check_replacement() returns if a replacement of clock_event_device is
possible or not. It does this as the first check:

	if (tick_check_percpu(curdev, newdev, smp_processor_id()))
		return false;

Thats wrong. tick_check_percpu() returns true when the device is
useable. Check for false instead.

[ tglx: Massaged changelog ]

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: fweisbec@gmail.com
Cc: Arvind.Chauhan@arm.com
Cc: linaro-networking@linaro.org
Link: http://lkml.kernel.org/r/486a02efe0246635aaba786e24b42d316438bf3b.1397537987.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 kernel/time/tick-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 162b03a..425bfae 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -275,7 +275,7 @@ static bool tick_check_preferred(struct clock_event_device *curdev,
 bool tick_check_replacement(struct clock_event_device *curdev,
 			    struct clock_event_device *newdev)
 {
-	if (tick_check_percpu(curdev, newdev, smp_processor_id()))
+	if (!tick_check_percpu(curdev, newdev, smp_processor_id()))
 		return false;
 
 	return tick_check_preferred(curdev, newdev);
-- 
1.9.1

[PATCH 3.13 014/160] tick-sched: Check tick_nohz_enabled in tick_nohz_switch_to_nohz()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 27630532ef5ead28b98cfe28d8f95222ef91c2b7 upstream.

Since commit d689fe222 (NOHZ: Check for nohz active instead of nohz
enabled) the tick_nohz_switch_to_nohz() function returns because it
checks for the tick_nohz_active flag. This can't be set, because the
function itself sets it.

Undo the change in tick_nohz_switch_to_nohz().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: fweisbec@gmail.com
Cc: Arvind.Chauhan@arm.com
Cc: linaro-networking@linaro.org
Link: http://lkml.kernel.org/r/40939c05f2d65d781b92b20302b02243d0654224.1397537987.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 kernel/time/tick-sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index ea20f7d..29b063b 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -970,7 +970,7 @@ static void tick_nohz_switch_to_nohz(void)
 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
 	ktime_t next;
 
-	if (!tick_nohz_active)
+	if (!tick_nohz_enabled)
 		return;
 
 	local_irq_disable();
-- 
1.9.1

[PATCH 3.13 015/160] ALSA: hda - add headset mic detect quirk for a Dell laptop

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit 67807ce55f6e5ad5c04a748aa195333d6af05654 upstream.

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x1028067f), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 93b95b8..076b83a9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4409,6 +4409,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x065f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0662, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0667, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
-- 
1.9.1

[PATCH 3.13 016/160] ALSA: hda/realtek - Add headset Mic support for Dell machine

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kailang Yang <kailang@realtek.com>

commit 8dc9abb93dde94e7f2bc719032fe16f5713df05c upstream.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/pci/hda/patch_realtek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 076b83a9..b88e912 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5216,6 +5216,8 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0628, "Dell", ALC668_FIXUP_AUTO_MUTE),
 	SND_PCI_QUIRK(0x1028, 0x064e, "Dell", ALC668_FIXUP_AUTO_MUTE),
+	SND_PCI_QUIRK(0x1028, 0x0696, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_BASS_1A_CHMAP),
 	SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_CHMAP),
-- 
1.9.1

[PATCH 3.13 017/160] staging: r8188eu: Calling rtw_get_stainfo() with a NULL sta_addr will return NULL

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 9452bf560273e4de2395ffdd79024debfb0c1290 upstream.

This makes the follow-on check for psta != NULL pointless and makes
the whole exercise rather pointless. This is another case of why
blindly zero-initializing variables when they are declared is bad.

Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/staging/rtl8188eu/core/rtw_recv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 9f0f30f7..6f281d4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -558,7 +558,7 @@ _func_exit_;
 /* set the security information in the recv_frame */
 static union recv_frame *portctrl(struct adapter *adapter, union recv_frame *precv_frame)
 {
-	u8   *psta_addr = NULL, *ptr;
+	u8   *psta_addr, *ptr;
 	uint  auth_alg;
 	struct recv_frame_hdr *pfhdr;
 	struct sta_info *psta;
@@ -572,7 +572,6 @@ static union recv_frame *portctrl(struct adapter *adapter, union recv_frame *pre
 _func_enter_;
 
 	pstapriv = &adapter->stapriv;
-	psta = rtw_get_stainfo(pstapriv, psta_addr);
 
 	auth_alg = adapter->securitypriv.dot11AuthAlgrthm;
 
@@ -580,6 +579,7 @@ _func_enter_;
 	pfhdr = &precv_frame->u.hdr;
 	pattrib = &pfhdr->attrib;
 	psta_addr = pattrib->ta;
+	psta = rtw_get_stainfo(pstapriv, psta_addr);
 
 	prtnframe = NULL;
 
-- 
1.9.1

[PATCH 3.13 018/160] cifs: Wait for writebacks to complete before attempting write.

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sachin Prabhu <sprabhu@redhat.com>

commit c11f1df5003d534fd067f0168bfad7befffb3b5c upstream.

Problem reported in Red Hat bz 1040329 for strict writes where we cache
only when we hold oplock and write direct to the server when we don't.

When we receive an oplock break, we first change the oplock value for
the inode in cifsInodeInfo->oplock to indicate that we no longer hold
the oplock before we enqueue a task to flush changes to the backing
device. Once we have completed flushing the changes, we return the
oplock to the server.

There are 2 ways here where we can have data corruption
1) While we flush changes to the backing device as part of the oplock
break, we can have processes write to the file. These writes check for
the oplock, find none and attempt to write directly to the server.
These direct writes made while we are flushing from cache could be
overwritten by data being flushed from the cache causing data
corruption.
2) While a thread runs in cifs_strict_writev, the machine could receive
and process an oplock break after the thread has checked the oplock and
found that it allows us to cache and before we have made changes to the
cache. In that case, we end up with a dirty page in cache when we
shouldn't have any. This will be flushed later and will overwrite all
subsequent writes to the part of the file represented by this page.

Before making any writes to the server, we need to confirm that we are
not in the process of flushing data to the server and if we are, we
should wait until the process is complete before we attempt the write.
We should also wait for existing writes to complete before we process
an oplock break request which changes oplock values.

We add a version specific  downgrade_oplock() operation to allow for
differences in the oplock values set for the different smb versions.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/cifs/cifsfs.c    | 14 +++++++++-
 fs/cifs/cifsglob.h  |  8 ++++++
 fs/cifs/cifsproto.h |  3 +++
 fs/cifs/file.c      | 31 +++++++++++++++++++---
 fs/cifs/misc.c      | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++--
 fs/cifs/smb1ops.c   | 11 ++++++++
 fs/cifs/smb2misc.c  | 18 ++++++++++---
 fs/cifs/smb2ops.c   | 14 ++++++++++
 8 files changed, 164 insertions(+), 9 deletions(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 849f613..7c6b73c 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -253,6 +253,11 @@ cifs_alloc_inode(struct super_block *sb)
 	cifs_set_oplock_level(cifs_inode, 0);
 	cifs_inode->delete_pending = false;
 	cifs_inode->invalid_mapping = false;
+	clear_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cifs_inode->flags);
+	clear_bit(CIFS_INODE_PENDING_WRITERS, &cifs_inode->flags);
+	clear_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2, &cifs_inode->flags);
+	spin_lock_init(&cifs_inode->writers_lock);
+	cifs_inode->writers = 0;
 	cifs_inode->vfs_inode.i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
 	cifs_inode->server_eof = 0;
 	cifs_inode->uniqueid = 0;
@@ -731,19 +736,26 @@ static ssize_t cifs_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
 				   unsigned long nr_segs, loff_t pos)
 {
 	struct inode *inode = file_inode(iocb->ki_filp);
+	struct cifsInodeInfo *cinode = CIFS_I(inode);
 	ssize_t written;
 	int rc;
 
+	written = cifs_get_writer(cinode);
+	if (written)
+		return written;
+
 	written = generic_file_aio_write(iocb, iov, nr_segs, pos);
 
 	if (CIFS_CACHE_WRITE(CIFS_I(inode)))
-		return written;
+		goto out;
 
 	rc = filemap_fdatawrite(inode->i_mapping);
 	if (rc)
 		cifs_dbg(FYI, "cifs_file_aio_write: %d rc on %p inode\n",
 			 rc, inode);
 
+out:
+	cifs_put_writer(cinode);
 	return written;
 }
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 579c6d5..dce9208 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -228,6 +228,8 @@ struct smb_version_operations {
 	/* verify the message */
 	int (*check_message)(char *, unsigned int);
 	bool (*is_oplock_break)(char *, struct TCP_Server_Info *);
+	void (*downgrade_oplock)(struct TCP_Server_Info *,
+					struct cifsInodeInfo *, bool);
 	/* process transaction2 response */
 	bool (*check_trans2)(struct mid_q_entry *, struct TCP_Server_Info *,
 			     char *, int);
@@ -1106,6 +1108,12 @@ struct cifsInodeInfo {
 	unsigned int epoch;		/* used to track lease state changes */
 	bool delete_pending;		/* DELETE_ON_CLOSE is set */
 	bool invalid_mapping;		/* pagecache is invalid */
+	unsigned long flags;
+#define CIFS_INODE_PENDING_OPLOCK_BREAK   (0) /* oplock break in progress */
+#define CIFS_INODE_PENDING_WRITERS	  (1) /* Writes in progress */
+#define CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2 (2) /* Downgrade oplock to L2 */
+	spinlock_t writers_lock;
+	unsigned int writers;		/* Number of writers on this inode */
 	unsigned long time;		/* jiffies of last update of inode */
 	u64  server_eof;		/* current file size on server -- protected by i_lock */
 	u64  uniqueid;			/* server inode number */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 2c29db6..fa41676 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -127,6 +127,9 @@ extern u64 cifs_UnixTimeToNT(struct timespec);
 extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
 				      int offset);
 extern void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock);
+extern int cifs_get_writer(struct cifsInodeInfo *cinode);
+extern void cifs_put_writer(struct cifsInodeInfo *cinode);
+extern void cifs_done_oplock_break(struct cifsInodeInfo *cinode);
 extern int cifs_unlock_range(struct cifsFileInfo *cfile,
 			     struct file_lock *flock, const unsigned int xid);
 extern int cifs_push_mandatory_locks(struct cifsFileInfo *cfile);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index a1c9ead..4911dc8 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2611,12 +2611,20 @@ cifs_strict_writev(struct kiocb *iocb, const struct iovec *iov,
 	struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
 	ssize_t written;
 
+	written = cifs_get_writer(cinode);
+	if (written)
+		return written;
+
 	if (CIFS_CACHE_WRITE(cinode)) {
 		if (cap_unix(tcon->ses) &&
 		(CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability))
-		    && ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOPOSIXBRL) == 0))
-			return generic_file_aio_write(iocb, iov, nr_segs, pos);
-		return cifs_writev(iocb, iov, nr_segs, pos);
+		  && ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOPOSIXBRL) == 0)) {
+			written = generic_file_aio_write(
+					iocb, iov, nr_segs, pos);
+			goto out;
+		}
+		written = cifs_writev(iocb, iov, nr_segs, pos);
+		goto out;
 	}
 	/*
 	 * For non-oplocked files in strict cache mode we need to write the data
@@ -2636,6 +2644,8 @@ cifs_strict_writev(struct kiocb *iocb, const struct iovec *iov,
 			 inode);
 		cinode->oplock = 0;
 	}
+out:
+	cifs_put_writer(cinode);
 	return written;
 }
 
@@ -3647,6 +3657,13 @@ static int cifs_launder_page(struct page *page)
 	return rc;
 }
 
+static int
+cifs_pending_writers_wait(void *unused)
+{
+	schedule();
+	return 0;
+}
+
 void cifs_oplock_break(struct work_struct *work)
 {
 	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
@@ -3654,8 +3671,15 @@ void cifs_oplock_break(struct work_struct *work)
 	struct inode *inode = cfile->dentry->d_inode;
 	struct cifsInodeInfo *cinode = CIFS_I(inode);
 	struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
+	struct TCP_Server_Info *server = tcon->ses->server;
 	int rc = 0;
 
+	wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS,
+			cifs_pending_writers_wait, TASK_UNINTERRUPTIBLE);
+
+	server->ops->downgrade_oplock(server, cinode,
+		test_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2, &cinode->flags));
+
 	if (!CIFS_CACHE_WRITE(cinode) && CIFS_CACHE_READ(cinode) &&
 						cifs_has_mand_locks(cinode)) {
 		cifs_dbg(FYI, "Reset oplock to None for inode=%p due to mand locks\n",
@@ -3692,6 +3716,7 @@ void cifs_oplock_break(struct work_struct *work)
 							     cinode);
 		cifs_dbg(FYI, "Oplock release rc = %d\n", rc);
 	}
+	cifs_done_oplock_break(cinode);
 }
 
 /*
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 2f9f379..3b0c62e 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -466,8 +466,22 @@ is_valid_oplock_break(char *buffer, struct TCP_Server_Info *srv)
 				cifs_dbg(FYI, "file id match, oplock break\n");
 				pCifsInode = CIFS_I(netfile->dentry->d_inode);
 
-				cifs_set_oplock_level(pCifsInode,
-					pSMB->OplockLevel ? OPLOCK_READ : 0);
+				set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK,
+					&pCifsInode->flags);
+
+				/*
+				 * Set flag if the server downgrades the oplock
+				 * to L2 else clear.
+				 */
+				if (pSMB->OplockLevel)
+					set_bit(
+					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
+					   &pCifsInode->flags);
+				else
+					clear_bit(
+					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
+					   &pCifsInode->flags);
+
 				queue_work(cifsiod_wq,
 					   &netfile->oplock_break);
 				netfile->oplock_break_cancelled = false;
@@ -551,6 +565,62 @@ void cifs_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock)
 		cinode->oplock = 0;
 }
 
+static int
+cifs_oplock_break_wait(void *unused)
+{
+	schedule();
+	return signal_pending(current) ? -ERESTARTSYS : 0;
+}
+
+/*
+ * We wait for oplock breaks to be processed before we attempt to perform
+ * writes.
+ */
+int cifs_get_writer(struct cifsInodeInfo *cinode)
+{
+	int rc;
+
+start:
+	rc = wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_OPLOCK_BREAK,
+				   cifs_oplock_break_wait, TASK_KILLABLE);
+	if (rc)
+		return rc;
+
+	spin_lock(&cinode->writers_lock);
+	if (!cinode->writers)
+		set_bit(CIFS_INODE_PENDING_WRITERS, &cinode->flags);
+	cinode->writers++;
+	/* Check to see if we have started servicing an oplock break */
+	if (test_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cinode->flags)) {
+		cinode->writers--;
+		if (cinode->writers == 0) {
+			clear_bit(CIFS_INODE_PENDING_WRITERS, &cinode->flags);
+			wake_up_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS);
+		}
+		spin_unlock(&cinode->writers_lock);
+		goto start;
+	}
+	spin_unlock(&cinode->writers_lock);
+	return 0;
+}
+
+void cifs_put_writer(struct cifsInodeInfo *cinode)
+{
+	spin_lock(&cinode->writers_lock);
+	cinode->writers--;
+	if (cinode->writers == 0) {
+		clear_bit(CIFS_INODE_PENDING_WRITERS, &cinode->flags);
+		wake_up_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS);
+	}
+	spin_unlock(&cinode->writers_lock);
+}
+
+void cifs_done_oplock_break(struct cifsInodeInfo *cinode)
+{
+	clear_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cinode->flags);
+	wake_up_bit(&cinode->flags, CIFS_INODE_PENDING_OPLOCK_BREAK);
+}
+
 bool
 backup_cred(struct cifs_sb_info *cifs_sb)
 {
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index ffc9ef9..e936e26 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -372,6 +372,16 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
 	return 0;
 }
 
+static void
+cifs_downgrade_oplock(struct TCP_Server_Info *server,
+			struct cifsInodeInfo *cinode, bool set_level2)
+{
+	if (set_level2)
+		cifs_set_oplock_level(cinode, OPLOCK_READ);
+	else
+		cifs_set_oplock_level(cinode, 0);
+}
+
 static bool
 cifs_check_trans2(struct mid_q_entry *mid, struct TCP_Server_Info *server,
 		  char *buf, int malformed)
@@ -964,6 +974,7 @@ struct smb_version_operations smb1_operations = {
 	.clear_stats = cifs_clear_stats,
 	.print_stats = cifs_print_stats,
 	.is_oplock_break = is_valid_oplock_break,
+	.downgrade_oplock = cifs_downgrade_oplock,
 	.check_trans2 = cifs_check_trans2,
 	.need_neg = cifs_need_neg,
 	.negotiate = cifs_negotiate,
diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index fb39662..b8021fd 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -575,9 +575,21 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server)
 				else
 					cfile->oplock_break_cancelled = false;
 
-				server->ops->set_oplock_level(cinode,
-				  rsp->OplockLevel ? SMB2_OPLOCK_LEVEL_II : 0,
-				  0, NULL);
+				set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK,
+					&cinode->flags);
+
+				/*
+				 * Set flag if the server downgrades the oplock
+				 * to L2 else clear.
+				 */
+				if (rsp->OplockLevel)
+					set_bit(
+					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
+					   &cinode->flags);
+				else
+					clear_bit(
+					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
+					   &cinode->flags);
 
 				queue_work(cifsiod_wq, &cfile->oplock_break);
 
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 192f51a..35ddc3e 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -905,6 +905,17 @@ smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 }
 
 static void
+smb2_downgrade_oplock(struct TCP_Server_Info *server,
+			struct cifsInodeInfo *cinode, bool set_level2)
+{
+	if (set_level2)
+		server->ops->set_oplock_level(cinode, SMB2_OPLOCK_LEVEL_II,
+						0, NULL);
+	else
+		server->ops->set_oplock_level(cinode, 0, 0, NULL);
+}
+
+static void
 smb2_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,
 		      unsigned int epoch, bool *purge_cache)
 {
@@ -1110,6 +1121,7 @@ struct smb_version_operations smb20_operations = {
 	.clear_stats = smb2_clear_stats,
 	.print_stats = smb2_print_stats,
 	.is_oplock_break = smb2_is_valid_oplock_break,
+	.downgrade_oplock = smb2_downgrade_oplock,
 	.need_neg = smb2_need_neg,
 	.negotiate = smb2_negotiate,
 	.negotiate_wsize = smb2_negotiate_wsize,
@@ -1184,6 +1196,7 @@ struct smb_version_operations smb21_operations = {
 	.clear_stats = smb2_clear_stats,
 	.print_stats = smb2_print_stats,
 	.is_oplock_break = smb2_is_valid_oplock_break,
+	.downgrade_oplock = smb2_downgrade_oplock,
 	.need_neg = smb2_need_neg,
 	.negotiate = smb2_negotiate,
 	.negotiate_wsize = smb2_negotiate_wsize,
@@ -1259,6 +1272,7 @@ struct smb_version_operations smb30_operations = {
 	.print_stats = smb2_print_stats,
 	.dump_share_caps = smb2_dump_share_caps,
 	.is_oplock_break = smb2_is_valid_oplock_break,
+	.downgrade_oplock = smb2_downgrade_oplock,
 	.need_neg = smb2_need_neg,
 	.negotiate = smb2_negotiate,
 	.negotiate_wsize = smb2_negotiate_wsize,
-- 
1.9.1

[PATCH 3.13 019/160] mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Mason <clm@fb.com>

commit c98235cb8584a72e95786e17d695a8e5fafcd766 upstream.

The mlx4 driver is triggering schedules while atomic inside
mlx4_en_netpoll:

	spin_lock_irqsave(&cq->lock, flags);
	napi_synchronize(&cq->napi);
		^^^^^ msleep here
	mlx4_en_process_rx_cq(dev, cq, 0);
	spin_unlock_irqrestore(&cq->lock, flags);

This was part of a patch by Alexander Guller from Mellanox in 2011,
but it still isn't upstream.

Signed-off-by: Chris Mason <clm@fb.com>
Acked-By: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_cq.c     | 1 -
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 6 +-----
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   | 1 -
 3 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
index 3a098cc..67d44ca 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
@@ -66,7 +66,6 @@ int mlx4_en_create_cq(struct mlx4_en_priv *priv,
 
 	cq->ring = ring;
 	cq->is_tx = mode;
-	spin_lock_init(&cq->lock);
 
 	/* Allocate HW buffers on provided NUMA node.
 	 * dev->numa_node is used in mtt range allocation flow.
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index e72d8a1..c23f2ae 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1237,15 +1237,11 @@ static void mlx4_en_netpoll(struct net_device *dev)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_en_cq *cq;
-	unsigned long flags;
 	int i;
 
 	for (i = 0; i < priv->rx_ring_num; i++) {
 		cq = priv->rx_cq[i];
-		spin_lock_irqsave(&cq->lock, flags);
-		napi_synchronize(&cq->napi);
-		mlx4_en_process_rx_cq(dev, cq, 0);
-		spin_unlock_irqrestore(&cq->lock, flags);
+		napi_schedule(&cq->napi);
 	}
 }
 #endif
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index d5758ad..1e3cf686 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -306,7 +306,6 @@ struct mlx4_en_cq {
 	struct mlx4_cq          mcq;
 	struct mlx4_hwq_resources wqres;
 	int                     ring;
-	spinlock_t              lock;
 	struct net_device      *dev;
 	struct napi_struct	napi;
 	int size;
-- 
1.9.1

[PATCH 3.13 020/160] mei: me: do not load the driver if the FW doesn't support MEI interface

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Winkler <tomas.winkler@intel.com>

commit 5e6533a6f52f1a8283b2f818f5828be99a417dd6 upstream.

NM and SPS  FW types that may run on ME device on server platforms
do not have valid MEI/HECI interface and driver should not
be bound to it as this might lead to system hung.
In practice not all BIOSes effectively hide such devices from the
OS and in some cases it is not possible.

We determine FW type by examining Host FW status registers in order to
unbind the driver.
In this patch we are adding check for ME on Cougar Point, Lynx Point
Devices

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/misc/mei/hw-me-regs.h |  5 +++++
 drivers/misc/mei/pci-me.c     | 30 +++++++++++++++++++++++-------
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 66f411a..cabc043 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -115,6 +115,11 @@
 #define MEI_DEV_ID_LPT_HR     0x8CBA  /* Lynx Point H Refresh */
 
 #define MEI_DEV_ID_WPT_LP     0x9CBA  /* Wildcat Point LP */
+
+/* Host Firmware Status Registers in PCI Config Space */
+#define PCI_CFG_HFS_1         0x40
+#define PCI_CFG_HFS_2         0x48
+
 /*
  * MEI HW Section
  */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 2cab3c0..6b0babc 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -100,15 +100,31 @@ static bool mei_me_quirk_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	u32 reg;
-	if (ent->device == MEI_DEV_ID_PBG_1) {
-		pci_read_config_dword(pdev, 0x48, &reg);
-		/* make sure that bit 9 is up and bit 10 is down */
-		if ((reg & 0x600) == 0x200) {
-			dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
-			return false;
-		}
+	/* Cougar Point || Patsburg */
+	if (ent->device == MEI_DEV_ID_CPT_1 ||
+	    ent->device == MEI_DEV_ID_PBG_1) {
+		pci_read_config_dword(pdev, PCI_CFG_HFS_2, &reg);
+		/* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
+		if ((reg & 0x600) == 0x200)
+			goto no_mei;
 	}
+
+	/* Lynx Point */
+	if (ent->device == MEI_DEV_ID_LPT_H  ||
+	    ent->device == MEI_DEV_ID_LPT_W  ||
+	    ent->device == MEI_DEV_ID_LPT_HR) {
+		/* Read ME FW Status check for SPS Firmware */
+		pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
+		/* if bits [19:16] = 15, running SPS Firmware */
+		if ((reg & 0xf0000) == 0xf0000)
+			goto no_mei;
+	}
+
 	return true;
+
+no_mei:
+	dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
+	return false;
 }
 /**
  * mei_probe - Device Initialization Routine
-- 
1.9.1

[PATCH 3.13 021/160] mei: ignore client writing state during cb completion

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Usyskin <alexander.usyskin@intel.com>

commit 34ec43661fe8f1977dd0f05353302ae2ed10aabb upstream.

Ignore client writing state during cb completion to fix a memory
leak.

When moving cbs to the completion list we should not look at
writing_state as this state can be already overwritten by next
write, the fact that a cb is on the write waiting list means
that it was already written to the HW and we can safely complete it.

Same pays for wait in poll handler, we do not have to check the state
wake is done after completion list processing.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/misc/mei/interrupt.c | 3 +--
 drivers/misc/mei/main.c      | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 6ce63f5..f061cf0 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -424,8 +424,7 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list)
 
 		cl->status = 0;
 		list_del(&cb->list);
-		if (MEI_WRITING == cl->writing_state &&
-		    cb->fop_type == MEI_FOP_WRITE &&
+		if (cb->fop_type == MEI_FOP_WRITE &&
 		    cl != &dev->iamthif_cl) {
 			cl_dbg(dev, cl, "MEI WRITE COMPLETE\n");
 			cl->writing_state = MEI_WRITE_COMPLETE;
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 9661a81..56c8205 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -653,8 +653,7 @@ static unsigned int mei_poll(struct file *file, poll_table *wait)
 		goto out;
 	}
 
-	if (MEI_WRITE_COMPLETE == cl->writing_state)
-		mask |= (POLLIN | POLLRDNORM);
+	mask |= (POLLIN | POLLRDNORM);
 
 out:
 	mutex_unlock(&dev->device_lock);
-- 
1.9.1

[PATCH 3.13 022/160] staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit f764cd68d9036498f08fe8834deb6a367b5c2542 upstream.

Zero-initializing ether_type masked that the ether type would never be
obtained for 8021x packets and the comparison against eapol_type
would always fail.

Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/staging/rtl8712/rtl871x_recv.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_recv.c b/drivers/staging/rtl8712/rtl871x_recv.c
index 23ec684..274c359 100644
--- a/drivers/staging/rtl8712/rtl871x_recv.c
+++ b/drivers/staging/rtl8712/rtl871x_recv.c
@@ -254,7 +254,7 @@ union recv_frame *r8712_portctrl(struct _adapter *adapter,
 	struct sta_info *psta;
 	struct	sta_priv *pstapriv;
 	union recv_frame *prtnframe;
-	u16 ether_type = 0;
+	u16 ether_type;
 
 	pstapriv = &adapter->stapriv;
 	ptr = get_recvframe_data(precv_frame);
@@ -263,15 +263,14 @@ union recv_frame *r8712_portctrl(struct _adapter *adapter,
 	psta = r8712_get_stainfo(pstapriv, psta_addr);
 	auth_alg = adapter->securitypriv.AuthAlgrthm;
 	if (auth_alg == 2) {
+		/* get ether_type */
+		ptr = ptr + pfhdr->attrib.hdrlen + LLC_HEADER_SIZE;
+		memcpy(&ether_type, ptr, 2);
+		ether_type = ntohs((unsigned short)ether_type);
+
 		if ((psta != NULL) && (psta->ieee8021x_blocked)) {
 			/* blocked
 			 * only accept EAPOL frame */
-			prtnframe = precv_frame;
-			/*get ether_type */
-			ptr = ptr + pfhdr->attrib.hdrlen +
-			      pfhdr->attrib.iv_len + LLC_HEADER_SIZE;
-			memcpy(&ether_type, ptr, 2);
-			ether_type = ntohs((unsigned short)ether_type);
 			if (ether_type == 0x888e)
 				prtnframe = precv_frame;
 			else {
-- 
1.9.1

[PATCH 3.13 023/160] staging: r8188eu: Fix case where ethtype was never obtained and always be checked against 0

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 33c84bc14c25074ac14644cf7db75a57e9abaf1a upstream.

Zero-initializing ether_type masked that the ether type would never be
obtained for 8021x packets and the comparison against eapol_type
would always fail.

Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/staging/rtl8188eu/core/rtw_recv.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 6f281d4..a468a15 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -564,10 +564,9 @@ static union recv_frame *portctrl(struct adapter *adapter, union recv_frame *pre
 	struct sta_info *psta;
 	struct sta_priv *pstapriv;
 	union recv_frame *prtnframe;
-	u16	ether_type = 0;
+	u16	ether_type;
 	u16  eapol_type = 0x888e;/* for Funia BD's WPA issue */
 	struct rx_pkt_attrib *pattrib;
-	__be16 be_tmp;
 
 _func_enter_;
 
@@ -586,18 +585,16 @@ _func_enter_;
 	RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("########portctrl:adapter->securitypriv.dot11AuthAlgrthm=%d\n", adapter->securitypriv.dot11AuthAlgrthm));
 
 	if (auth_alg == 2) {
+		/* get ether_type */
+		ptr = ptr + pfhdr->attrib.hdrlen + LLC_HEADER_SIZE;
+		memcpy(&ether_type, ptr, 2);
+		ether_type = ntohs((unsigned short)ether_type);
+
 		if ((psta != NULL) && (psta->ieee8021x_blocked)) {
 			/* blocked */
 			/* only accept EAPOL frame */
 			RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("########portctrl:psta->ieee8021x_blocked==1\n"));
 
-			prtnframe = precv_frame;
-
-			/* get ether_type */
-			ptr = ptr+pfhdr->attrib.hdrlen+pfhdr->attrib.iv_len+LLC_HEADER_SIZE;
-			memcpy(&be_tmp, ptr, 2);
-			ether_type = ntohs(be_tmp);
-
 			if (ether_type == eapol_type) {
 				prtnframe = precv_frame;
 			} else {
-- 
1.9.1

[PATCH 3.13 024/160] USB: serial: ftdi_sio: add id for Brainboxes serial cards

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michele Baldessari <michele@acksyn.org>

commit efe26e16b1d93ac0085e69178cc18811629e8fc5 upstream.

Custom VID/PIDs for Brainboxes cards as reported in
https://bugzilla.redhat.com/show_bug.cgi?id=1071914

Signed-off-by: Michele Baldessari <michele@acksyn.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/ftdi_sio.c     | 33 +++++++++++++++++++++++++++++++++
 drivers/usb/serial/ftdi_sio_ids.h | 37 +++++++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 2d7d12f..ae49336 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -910,6 +910,39 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
 	/* Cressi Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) },
+	/* Brainboxes Devices */
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e599fbf..993c93d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1326,3 +1326,40 @@
  * Manufacturer: Cressi
  */
 #define FTDI_CRESSI_PID		0x87d0
+
+/*
+ * Brainboxes devices
+ */
+#define BRAINBOXES_VID			0x05d1
+#define BRAINBOXES_VX_001_PID		0x1001 /* VX-001 ExpressCard 1 Port RS232 */
+#define BRAINBOXES_VX_012_PID		0x1002 /* VX-012 ExpressCard 2 Port RS232 */
+#define BRAINBOXES_VX_023_PID		0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */
+#define BRAINBOXES_VX_034_PID		0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */
+#define BRAINBOXES_US_101_PID		0x1011 /* US-101 1xRS232 */
+#define BRAINBOXES_US_324_PID		0x1013 /* US-324 1xRS422/485 1Mbaud */
+#define BRAINBOXES_US_606_1_PID		0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */
+#define BRAINBOXES_US_606_2_PID		0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */
+#define BRAINBOXES_US_606_3_PID		0x2003 /* US-606 6 Port RS232 Serial Port 4 and 6 */
+#define BRAINBOXES_US_701_1_PID		0x2011 /* US-701 4xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_701_2_PID		0x2012 /* US-701 4xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_1_PID		0x2021 /* US-279 8xRS422 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_279_2_PID		0x2022 /* US-279 8xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_3_PID		0x2023 /* US-279 8xRS422 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_279_4_PID		0x2024 /* US-279 8xRS422 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_346_1_PID		0x3011 /* US-346 4xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_346_2_PID		0x3012 /* US-346 4xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_257_PID		0x5001 /* US-257 2xRS232 1Mbaud */
+#define BRAINBOXES_US_313_PID		0x6001 /* US-313 2xRS422/485 1Mbaud */
+#define BRAINBOXES_US_357_PID		0x7001 /* US_357 1xRS232/422/485 */
+#define BRAINBOXES_US_842_1_PID		0x8001 /* US-842 8xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_842_2_PID		0x8002 /* US-842 8xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_842_3_PID		0x8003 /* US-842 8xRS422/485 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_842_4_PID		0x8004 /* US-842 8xRS422/485 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_1_PID		0x9001 /* US-160 16xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_160_2_PID		0x9002 /* US-160 16xRS232 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_160_3_PID		0x9003 /* US-160 16xRS232 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_160_4_PID		0x9004 /* US-160 16xRS232 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_5_PID		0x9005 /* US-160 16xRS232 1Mbaud Port 9 and 10 */
+#define BRAINBOXES_US_160_6_PID		0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */
+#define BRAINBOXES_US_160_7_PID		0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */
+#define BRAINBOXES_US_160_8_PID		0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
-- 
1.9.1

[PATCH 3.13 025/160] Revert "USB: serial: add usbid for dell wwan card to sierra.c"

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 2e01280d2801c72878cf3a7119eac30077b463d5 upstream.

This reverts commit 1ebca9dad5abe8b2ed4dbd186cd657fb47c1f321.

This device was erroneously added to the sierra driver even though it's
not a Sierra device and was already handled by the option driver.

Cc: Richard Farina <sidhayn@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/sierra.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index de958c5..b6910b7 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -291,7 +291,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
-       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
-- 
1.9.1

[PATCH 3.13 026/160] usb: option driver, add support for Telit UE910v2

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <dnlplm@gmail.com>

commit d6de486bc22255779bd54b0fceb4c240962bf146 upstream.

option driver, added VID/PID for Telit UE910v2 modem

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 68fc9fe..367c7f0 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -243,6 +243,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_CC864_DUAL		0x1005
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
+#define TELIT_PRODUCT_UE910_V2			0x1012
 #define TELIT_PRODUCT_LE920			0x1200
 
 /* ZTE PRODUCTS */
@@ -1041,6 +1042,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
-- 
1.9.1

[PATCH 3.13 027/160] USB: cp210x: Add 8281 (Nanotec Plug & Drive)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tristan Bruns <tristan@tristanbruns.de>

commit 72b3007951010ce1bbf950e23b19d9839fa905a5 upstream.

Signed-off-by: Tristan Bruns <tristan@tristanbruns.de>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 6987b53..71873ca 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -104,6 +104,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
-- 
1.9.1

[PATCH 3.13 028/160] USB: pl2303: add ids for Hewlett-Packard HP POS pole displays

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Sanders <aaron.sanders@hp.com>

commit b16c02fbfb963fa2941b7517ebf1f8a21946775e upstream.

Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays:

LD960: 03f0:0B39
LCM220: 03f0:3139
LCM960: 03f0:3239

[ Johan: fix indentation and sort PIDs numerically ]

Signed-off-by: Aaron Sanders <aaron.sanders@hp.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/pl2303.c | 3 +++
 drivers/usb/serial/pl2303.h | 5 ++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index beb8edc..6e09306 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -83,6 +83,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index c38b8c0..42bc082 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -121,8 +121,11 @@
 #define SUPERIAL_VENDOR_ID	0x5372
 #define SUPERIAL_PRODUCT_ID	0x2303
 
-/* Hewlett-Packard LD220-HP POS Pole Display */
+/* Hewlett-Packard POS Pole Displays */
 #define HP_VENDOR_ID		0x03f0
+#define HP_LD960_PRODUCT_ID	0x0b39
+#define HP_LCM220_PRODUCT_ID	0x3139
+#define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524
 
 /* Cressi Edy (diving computer) PC interface */
-- 
1.9.1

[PATCH 3.13 029/160] USB: usb_wwan: fix handling of missing bulk endpoints

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit bd73bd8831696f189a479a0712ae95208e513d7e upstream.

Fix regression introduced by commit 8e493ca1767d ("USB: usb_wwan: fix
bulk-urb allocation") by making sure to require both bulk-in and out
endpoints during port probe.

The original option driver (which usb_wwan is based on) was written
under the assumption that either endpoint could be missing, but
evidently this cannot have been tested properly. Specifically, it would
handle opening a device without bulk-in (but would blow up during resume
which was implemented later), but not a missing bulk-out in write()
(although it is handled in some places such as write_room()).

Fortunately (?), the driver also got the test for missing endpoints
wrong so the urbs were in fact always allocated, although they would be
initialised using the wrong endpoint address (0) and any submission of
such an urb would fail.

The commit mentioned above fixed the test for missing endpoints but
thereby exposed the other bugs which would now generate null-pointer
exceptions rather than failed urb submissions.

The regression was introduced in v3.7, but the offending commit was also
marked for stable.

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/usb_wwan.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 8536578..6fa7836 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -470,6 +470,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	int err;
 	int i;
 
+	if (!port->bulk_in_size || !port->bulk_out_size)
+		return -ENODEV;
+
 	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 	if (!portdata)
 		return -ENOMEM;
@@ -477,9 +480,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	init_usb_anchor(&portdata->delayed);
 
 	for (i = 0; i < N_IN_URB; i++) {
-		if (!port->bulk_in_size)
-			break;
-
 		buffer = (u8 *)__get_free_page(GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error;
@@ -493,9 +493,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	}
 
 	for (i = 0; i < N_OUT_URB; i++) {
-		if (!port->bulk_out_size)
-			break;
-
 		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error2;
-- 
1.9.1

[PATCH 3.13 030/160] USB: fix crash during hotplug of PCI USB controller card

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit a2ff864b53eac9a0e9b05bfe9d1781ccd6c2af71 upstream.

The code in hcd-pci.c that matches up EHCI controllers with their
companion UHCI or OHCI controllers assumes that the private drvdata
fields don't get set too early.  However, it turns out that this field
gets set by usb_create_hcd(), before hcd-pci expects it, and this can
result in a crash when two controllers are probed in parallel (as can
happen when a new controller card is hotplugged).

The companions_rwsem lock was supposed to prevent this sort of thing,
but usb_create_hcd() is called outside the scope of the rwsem.

A simple solution is to check that the root-hub pointer has been
initialized as well as the drvdata field.  This doesn't happen until
usb_add_hcd() is called; that call and the check are both protected by
the rwsem.

This patch should be applied to stable kernels from 3.10 onward.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefani Seibold <stefani@seibold.net>
Tested-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/core/hcd-pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index dfe9d0f..36ac1ae 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -75,7 +75,7 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
 				PCI_SLOT(companion->devfn) != slot)
 			continue;
 		companion_hcd = pci_get_drvdata(companion);
-		if (!companion_hcd)
+		if (!companion_hcd || !companion_hcd->self.root_hub)
 			continue;
 		fn(pdev, hcd, companion, companion_hcd);
 	}
-- 
1.9.1

[PATCH 3.13 031/160] USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driver

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ulbricht <michael.ulbricht@systec-electronic.com>

commit 895d240d1db0b2736d779200788e4c4aea28a0c6 upstream.

By specifying NO_UNION_NORMAL the ACM driver does only use the first two
USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA
interfaces are left to the USB serial driver.

Signed-off-by: Michael Ulbricht <michael.ulbricht@systec-electronic.com>
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/class/cdc-acm.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e840431..0b5e381 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1560,13 +1560,27 @@ static const struct usb_device_id acm_ids[] = {
 	},
 	/* Motorola H24 HSPA module: */
 	{ USB_DEVICE(0x22b8, 0x2d91) }, /* modem                                */
-	{ USB_DEVICE(0x22b8, 0x2d92) }, /* modem           + diagnostics        */
-	{ USB_DEVICE(0x22b8, 0x2d93) }, /* modem + AT port                      */
-	{ USB_DEVICE(0x22b8, 0x2d95) }, /* modem + AT port + diagnostics        */
-	{ USB_DEVICE(0x22b8, 0x2d96) }, /* modem                         + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d97) }, /* modem           + diagnostics + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d99) }, /* modem + AT port               + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d9a) }, /* modem + AT port + diagnostics + NMEA */
+	{ USB_DEVICE(0x22b8, 0x2d92),   /* modem           + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d93),   /* modem + AT port                      */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d95),   /* modem + AT port + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d96),   /* modem                         + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d97),   /* modem           + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d99),   /* modem + AT port               + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d9a),   /* modem + AT port + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
 
 	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
 	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
-- 
1.9.1

[PATCH 3.13 032/160] Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "K. Y. Srinivasan" <kys@microsoft.com>

commit 03367ef5ea811475187a0732aada068919e14d61 upstream.

Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality
is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the
VMBUS protocol.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/hv/connection.c | 5 ++++-
 include/linux/hyperv.h  | 4 +++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index f2d7bf9..2e7801a 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -55,6 +55,9 @@ static __u32 vmbus_get_next_version(__u32 current_version)
 	case (VERSION_WIN8):
 		return VERSION_WIN7;
 
+	case (VERSION_WIN8_1):
+		return VERSION_WIN8;
+
 	case (VERSION_WS2008):
 	default:
 		return VERSION_INVAL;
@@ -77,7 +80,7 @@ static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo,
 	msg->interrupt_page = virt_to_phys(vmbus_connection.int_page);
 	msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
 	msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
-	if (version == VERSION_WIN8)
+	if (version == VERSION_WIN8_1)
 		msg->target_vcpu = hv_context.vp_index[smp_processor_id()];
 
 	/*
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 344883d..6088058 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -464,15 +464,17 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi,
  * 0 . 13 (Windows Server 2008)
  * 1 . 1  (Windows 7)
  * 2 . 4  (Windows 8)
+ * 3 . 0  (Windows 8 R2)
  */
 
 #define VERSION_WS2008  ((0 << 16) | (13))
 #define VERSION_WIN7    ((1 << 16) | (1))
 #define VERSION_WIN8    ((2 << 16) | (4))
+#define VERSION_WIN8_1    ((3 << 16) | (0))
 
 #define VERSION_INVAL -1
 
-#define VERSION_CURRENT VERSION_WIN8
+#define VERSION_CURRENT VERSION_WIN8_1
 
 /* Make maximum size of pipe payload of 16K */
 #define MAX_PIPE_DATA_PAYLOAD		(sizeof(u8) * 16384)
-- 
1.9.1

[PATCH 3.13 033/160] serial: omap: Fix missing pm_runtime_resume handling by simplifying code

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit d758c9c1b36b4d9a141c2146c70398d756167ed1 upstream.

The lack of pm_runtime_resume handling for the device state leads into
device wake-up interrupts not working after a while for runtime PM.

Also, serial-omap is confused about the use of device_may_wakeup.
The checks for device_may_wakeup should only be done for suspend and
resume, not for pm_runtime_suspend and pm_runtime_resume. The wake-up
events for PM runtime should always be enabled.

The lack of pm_runtime_resume handling leads into device wake-up
interrupts not working after a while for runtime PM.

Rather than try to patch over the issue of adding complex tests to
the pm_runtime_resume, let's fix the issues properly:

1. Make serial_omap_enable_wakeup deal with all internal PM state
   handling so we don't need to test for up->wakeups_enabled elsewhere.

   Later on once omap3 boots in device tree only mode we can also
   remove the up->wakeups_enabled flag and rely on the wake-up
   interrupt enable/disable state alone.

2. Do the device_may_wakeup checks in suspend and resume only,
   for runtime PM the wake-up events need to be always enabled.

3. Finally just call serial_omap_enable_wakeup and make sure we
   call it also in pm_runtime_resume.

4. Note that we also have to use disable_irq_nosync as serial_omap_irq
   calls pm_runtime_get_sync.

Fixes: 2a0b965cfb6e (serial: omap: Add support for optional wake-up)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/tty/serial/omap-serial.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 2051581..f5d0720 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -225,14 +225,19 @@ static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
 	if (enable)
 		enable_irq(up->wakeirq);
 	else
-		disable_irq(up->wakeirq);
+		disable_irq_nosync(up->wakeirq);
 }
 
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
 
+	if (enable == up->wakeups_enabled)
+		return;
+
 	serial_omap_enable_wakeirq(up, enable);
+	up->wakeups_enabled = enable;
+
 	if (!pdata || !pdata->enable_wakeup)
 		return;
 
@@ -1488,6 +1493,11 @@ static int serial_omap_suspend(struct device *dev)
 	uart_suspend_port(&serial_omap_reg, &up->port);
 	flush_work(&up->qos_work);
 
+	if (device_may_wakeup(dev))
+		serial_omap_enable_wakeup(up, true);
+	else
+		serial_omap_enable_wakeup(up, false);
+
 	return 0;
 }
 
@@ -1495,6 +1505,9 @@ static int serial_omap_resume(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
 
+	if (device_may_wakeup(dev))
+		serial_omap_enable_wakeup(up, false);
+
 	uart_resume_port(&serial_omap_reg, &up->port);
 
 	return 0;
@@ -1867,17 +1880,7 @@ static int serial_omap_runtime_suspend(struct device *dev)
 
 	up->context_loss_cnt = serial_omap_get_context_loss_count(up);
 
-	if (device_may_wakeup(dev)) {
-		if (!up->wakeups_enabled) {
-			serial_omap_enable_wakeup(up, true);
-			up->wakeups_enabled = true;
-		}
-	} else {
-		if (up->wakeups_enabled) {
-			serial_omap_enable_wakeup(up, false);
-			up->wakeups_enabled = false;
-		}
-	}
+	serial_omap_enable_wakeup(up, true);
 
 	up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
 	schedule_work(&up->qos_work);
@@ -1891,6 +1894,8 @@ static int serial_omap_runtime_resume(struct device *dev)
 
 	int loss_cnt = serial_omap_get_context_loss_count(up);
 
+	serial_omap_enable_wakeup(up, false);
+
 	if (loss_cnt < 0) {
 		dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n",
 			loss_cnt);
-- 
1.9.1

[PATCH 3.13 034/160] drm/radeon: disable mclk dpm on R7 260X

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 57700ad1f2f21d5d7ab7ee0e58d11b5954852434 upstream.

Setting higher mclks seems to cause stability issues
on some R7 260X boards.  Disable it for now for stability
until we find a proper fix.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75992

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/ci_dpm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index 1ed4799..d4ca530 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -5128,6 +5128,10 @@ int ci_dpm_init(struct radeon_device *rdev)
 	pi->mclk_dpm_key_disabled = 0;
 	pi->pcie_dpm_key_disabled = 0;
 
+	/* mclk dpm is unstable on some R7 260X cards */
+	if (rdev->pdev->device == 0x6658)
+		pi->mclk_dpm_key_disabled = 1;
+
 	pi->caps_sclk_ds = true;
 
 	pi->mclk_strobe_mode_threshold = 40000;
-- 
1.9.1

[PATCH 3.13 035/160] drm/radeon: fix runpm handling on APUs (v4)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 90c4cde9d5a2bb6239cb3e253bb3832ed89dc75c upstream.

Don't try and runtime suspend the APU in PX systems.  We
only want to power down the dGPU.

v2: fix harder
v3: fix stupid typo
v4: consolidate runpm enablement to a single flag

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=75127
https://bugzilla.kernel.org/show_bug.cgi?id=72701

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ kamal: backport to 3.13-stable: no pm_runtime_forbid() ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon.h              |  1 +
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |  2 +-
 drivers/gpu/drm/radeon/radeon_device.c       | 19 ++++++++++---------
 drivers/gpu/drm/radeon/radeon_drv.c          | 12 ++++--------
 drivers/gpu/drm/radeon/radeon_family.h       |  1 +
 drivers/gpu/drm/radeon/radeon_kms.c          | 14 ++++++++++----
 6 files changed, 27 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 4485236..319bd81 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -2231,6 +2231,7 @@ struct radeon_device {
 	bool have_disp_power_ref;
 };
 
+bool radeon_is_px(struct drm_device *dev);
 int radeon_device_init(struct radeon_device *rdev,
 		       struct drm_device *ddev,
 		       struct pci_dev *pdev,
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index fa9a9c0..dedea72 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -59,7 +59,7 @@ struct atpx_mux {
 	u16 mux;
 } __packed;
 
-bool radeon_is_px(void) {
+bool radeon_has_atpx(void) {
 	return radeon_atpx_priv.atpx_detected;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 39b033b..63069a9 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -102,11 +102,14 @@ static const char radeon_family_name[][16] = {
 	"LAST",
 };
 
-#if defined(CONFIG_VGA_SWITCHEROO)
-bool radeon_is_px(void);
-#else
-static inline bool radeon_is_px(void) { return false; }
-#endif
+bool radeon_is_px(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (rdev->flags & RADEON_IS_PX)
+		return true;
+	return false;
+}
 
 /**
  * radeon_program_register_sequence - program an array of registers.
@@ -1077,7 +1080,7 @@ static void radeon_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
 
-	if (radeon_is_px() && state == VGA_SWITCHEROO_OFF)
+	if (radeon_is_px(dev) && state == VGA_SWITCHEROO_OFF)
 		return;
 
 	if (state == VGA_SWITCHEROO_ON) {
@@ -1298,9 +1301,7 @@ int radeon_device_init(struct radeon_device *rdev,
 	 * ignore it */
 	vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
 
-	if (radeon_runtime_pm == 1)
-		runtime = true;
-	if ((radeon_runtime_pm == -1) && radeon_is_px())
+	if (rdev->flags & RADEON_IS_PX)
 		runtime = true;
 	vga_switcheroo_register_client(rdev->pdev, &radeon_switcheroo_ops, runtime);
 	if (runtime)
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 5fa8196..43872c6 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -111,6 +111,7 @@ void radeon_gem_object_close(struct drm_gem_object *obj,
 extern int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc,
 				      int *vpos, int *hpos, ktime_t *stime,
 				      ktime_t *etime);
+extern bool radeon_is_px(struct drm_device *dev);
 extern const struct drm_ioctl_desc radeon_ioctls_kms[];
 extern int radeon_max_kms_ioctl;
 int radeon_mmap(struct file *filp, struct vm_area_struct *vma);
@@ -140,11 +141,9 @@ void radeon_debugfs_cleanup(struct drm_minor *minor);
 #if defined(CONFIG_VGA_SWITCHEROO)
 void radeon_register_atpx_handler(void);
 void radeon_unregister_atpx_handler(void);
-bool radeon_is_px(void);
 #else
 static inline void radeon_register_atpx_handler(void) {}
 static inline void radeon_unregister_atpx_handler(void) {}
-static inline bool radeon_is_px(void) { return false; }
 #endif
 
 int radeon_no_wb;
@@ -400,7 +399,7 @@ static int radeon_pmops_runtime_suspend(struct device *dev)
 	if (radeon_runtime_pm == 0)
 		return -EINVAL;
 
-	if (radeon_runtime_pm == -1 && !radeon_is_px())
+	if (radeon_runtime_pm == -1 && !radeon_is_px(drm_dev))
 		return -EINVAL;
 
 	drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
@@ -422,10 +421,7 @@ static int radeon_pmops_runtime_resume(struct device *dev)
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
 	int ret;
 
-	if (radeon_runtime_pm == 0)
-		return -EINVAL;
-
-	if (radeon_runtime_pm == -1 && !radeon_is_px())
+	if (!radeon_is_px(drm_dev))
 		return -EINVAL;
 
 	drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
@@ -454,7 +450,7 @@ static int radeon_pmops_runtime_idle(struct device *dev)
 		return -EBUSY;
 
 	/* are we PX enabled? */
-	if (radeon_runtime_pm == -1 && !radeon_is_px()) {
+	if (radeon_runtime_pm == -1 && !radeon_is_px(drm_dev)) {
 		DRM_DEBUG_DRIVER("failing to power off - not px\n");
 		return -EBUSY;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h
index 614ad54..9da5da4 100644
--- a/drivers/gpu/drm/radeon/radeon_family.h
+++ b/drivers/gpu/drm/radeon/radeon_family.h
@@ -115,6 +115,7 @@ enum radeon_chip_flags {
 	RADEON_NEW_MEMMAP = 0x00400000UL,
 	RADEON_IS_PCI = 0x00800000UL,
 	RADEON_IS_IGPGART = 0x01000000UL,
+	RADEON_IS_PX = 0x02000000UL,
 };
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 4818b44..10a416e 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -35,9 +35,9 @@
 #include <linux/pm_runtime.h>
 
 #if defined(CONFIG_VGA_SWITCHEROO)
-bool radeon_is_px(void);
+bool radeon_has_atpx(void);
 #else
-static inline bool radeon_is_px(void) { return false; }
+static inline bool radeon_has_atpx(void) { return false; }
 #endif
 
 /**
@@ -107,6 +107,13 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 		flags |= RADEON_IS_PCI;
 	}
 
+	if (radeon_runtime_pm == 1)
+		flags |= RADEON_IS_PX;
+	else if ((radeon_runtime_pm == -1) &&
+		 radeon_has_atpx() &&
+		 ((flags & RADEON_IS_IGP) == 0))
+		flags |= RADEON_IS_PX;
+
 	/* radeon_device_init should report only fatal error
 	 * like memory allocation failure or iomapping failure,
 	 * or memory manager initialization failure, it must
@@ -137,8 +144,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 				"Error during ACPI methods call\n");
 	}
 
-	if ((radeon_runtime_pm == 1) ||
-	    ((radeon_runtime_pm == -1) && radeon_is_px())) {
+	if (radeon_is_px(dev)) {
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
-- 
1.9.1

[PATCH 3.13 036/160] drm/radeon: add support for newer mc ucode on SI (v2)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 1ebe92802eaf0569784dce843bc28a78842d236c upstream.

May fix stability issues with some newer cards.

v2: print out mc firmware version used and size

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_ucode.h |  3 +++
 drivers/gpu/drm/radeon/si.c           | 35 ++++++++++++++++++++++-------------
 2 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_ucode.h b/drivers/gpu/drm/radeon/radeon_ucode.h
index a77cd27..f415548 100644
--- a/drivers/gpu/drm/radeon/radeon_ucode.h
+++ b/drivers/gpu/drm/radeon/radeon_ucode.h
@@ -57,6 +57,9 @@
 #define BTC_MC_UCODE_SIZE            6024
 #define CAYMAN_MC_UCODE_SIZE         6037
 #define SI_MC_UCODE_SIZE             7769
+#define TAHITI_MC_UCODE_SIZE         7808
+#define PITCAIRN_MC_UCODE_SIZE       7775
+#define VERDE_MC_UCODE_SIZE          7875
 #define OLAND_MC_UCODE_SIZE          7863
 #define CIK_MC_UCODE_SIZE            7866
 #define HAWAII_MC_UCODE_SIZE         7933
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 4a2e532..925cac0 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -39,30 +39,35 @@ MODULE_FIRMWARE("radeon/TAHITI_pfp.bin");
 MODULE_FIRMWARE("radeon/TAHITI_me.bin");
 MODULE_FIRMWARE("radeon/TAHITI_ce.bin");
 MODULE_FIRMWARE("radeon/TAHITI_mc.bin");
+MODULE_FIRMWARE("radeon/TAHITI_mc2.bin");
 MODULE_FIRMWARE("radeon/TAHITI_rlc.bin");
 MODULE_FIRMWARE("radeon/TAHITI_smc.bin");
 MODULE_FIRMWARE("radeon/PITCAIRN_pfp.bin");
 MODULE_FIRMWARE("radeon/PITCAIRN_me.bin");
 MODULE_FIRMWARE("radeon/PITCAIRN_ce.bin");
 MODULE_FIRMWARE("radeon/PITCAIRN_mc.bin");
+MODULE_FIRMWARE("radeon/PITCAIRN_mc2.bin");
 MODULE_FIRMWARE("radeon/PITCAIRN_rlc.bin");
 MODULE_FIRMWARE("radeon/PITCAIRN_smc.bin");
 MODULE_FIRMWARE("radeon/VERDE_pfp.bin");
 MODULE_FIRMWARE("radeon/VERDE_me.bin");
 MODULE_FIRMWARE("radeon/VERDE_ce.bin");
 MODULE_FIRMWARE("radeon/VERDE_mc.bin");
+MODULE_FIRMWARE("radeon/VERDE_mc2.bin");
 MODULE_FIRMWARE("radeon/VERDE_rlc.bin");
 MODULE_FIRMWARE("radeon/VERDE_smc.bin");
 MODULE_FIRMWARE("radeon/OLAND_pfp.bin");
 MODULE_FIRMWARE("radeon/OLAND_me.bin");
 MODULE_FIRMWARE("radeon/OLAND_ce.bin");
 MODULE_FIRMWARE("radeon/OLAND_mc.bin");
+MODULE_FIRMWARE("radeon/OLAND_mc2.bin");
 MODULE_FIRMWARE("radeon/OLAND_rlc.bin");
 MODULE_FIRMWARE("radeon/OLAND_smc.bin");
 MODULE_FIRMWARE("radeon/HAINAN_pfp.bin");
 MODULE_FIRMWARE("radeon/HAINAN_me.bin");
 MODULE_FIRMWARE("radeon/HAINAN_ce.bin");
 MODULE_FIRMWARE("radeon/HAINAN_mc.bin");
+MODULE_FIRMWARE("radeon/HAINAN_mc2.bin");
 MODULE_FIRMWARE("radeon/HAINAN_rlc.bin");
 MODULE_FIRMWARE("radeon/HAINAN_smc.bin");
 
@@ -1465,7 +1470,7 @@ static int si_mc_load_microcode(struct radeon_device *rdev)
 	const __be32 *fw_data;
 	u32 running, blackout = 0;
 	u32 *io_mc_regs;
-	int i, ucode_size, regs_size;
+	int i, regs_size, ucode_size = rdev->mc_fw->size / 4;
 
 	if (!rdev->mc_fw)
 		return -EINVAL;
@@ -1473,28 +1478,23 @@ static int si_mc_load_microcode(struct radeon_device *rdev)
 	switch (rdev->family) {
 	case CHIP_TAHITI:
 		io_mc_regs = (u32 *)&tahiti_io_mc_regs;
-		ucode_size = SI_MC_UCODE_SIZE;
 		regs_size = TAHITI_IO_MC_REGS_SIZE;
 		break;
 	case CHIP_PITCAIRN:
 		io_mc_regs = (u32 *)&pitcairn_io_mc_regs;
-		ucode_size = SI_MC_UCODE_SIZE;
 		regs_size = TAHITI_IO_MC_REGS_SIZE;
 		break;
 	case CHIP_VERDE:
 	default:
 		io_mc_regs = (u32 *)&verde_io_mc_regs;
-		ucode_size = SI_MC_UCODE_SIZE;
 		regs_size = TAHITI_IO_MC_REGS_SIZE;
 		break;
 	case CHIP_OLAND:
 		io_mc_regs = (u32 *)&oland_io_mc_regs;
-		ucode_size = OLAND_MC_UCODE_SIZE;
 		regs_size = TAHITI_IO_MC_REGS_SIZE;
 		break;
 	case CHIP_HAINAN:
 		io_mc_regs = (u32 *)&hainan_io_mc_regs;
-		ucode_size = OLAND_MC_UCODE_SIZE;
 		regs_size = TAHITI_IO_MC_REGS_SIZE;
 		break;
 	}
@@ -1550,7 +1550,7 @@ static int si_init_microcode(struct radeon_device *rdev)
 	const char *chip_name;
 	const char *rlc_chip_name;
 	size_t pfp_req_size, me_req_size, ce_req_size, rlc_req_size, mc_req_size;
-	size_t smc_req_size;
+	size_t smc_req_size, mc2_req_size;
 	char fw_name[30];
 	int err;
 
@@ -1565,6 +1565,7 @@ static int si_init_microcode(struct radeon_device *rdev)
 		ce_req_size = SI_CE_UCODE_SIZE * 4;
 		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
 		mc_req_size = SI_MC_UCODE_SIZE * 4;
+		mc2_req_size = TAHITI_MC_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(TAHITI_SMC_UCODE_SIZE, 4);
 		break;
 	case CHIP_PITCAIRN:
@@ -1575,6 +1576,7 @@ static int si_init_microcode(struct radeon_device *rdev)
 		ce_req_size = SI_CE_UCODE_SIZE * 4;
 		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
 		mc_req_size = SI_MC_UCODE_SIZE * 4;
+		mc2_req_size = PITCAIRN_MC_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(PITCAIRN_SMC_UCODE_SIZE, 4);
 		break;
 	case CHIP_VERDE:
@@ -1585,6 +1587,7 @@ static int si_init_microcode(struct radeon_device *rdev)
 		ce_req_size = SI_CE_UCODE_SIZE * 4;
 		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
 		mc_req_size = SI_MC_UCODE_SIZE * 4;
+		mc2_req_size = VERDE_MC_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(VERDE_SMC_UCODE_SIZE, 4);
 		break;
 	case CHIP_OLAND:
@@ -1594,7 +1597,7 @@ static int si_init_microcode(struct radeon_device *rdev)
 		me_req_size = SI_PM4_UCODE_SIZE * 4;
 		ce_req_size = SI_CE_UCODE_SIZE * 4;
 		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
-		mc_req_size = OLAND_MC_UCODE_SIZE * 4;
+		mc_req_size = mc2_req_size = OLAND_MC_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(OLAND_SMC_UCODE_SIZE, 4);
 		break;
 	case CHIP_HAINAN:
@@ -1604,7 +1607,7 @@ static int si_init_microcode(struct radeon_device *rdev)
 		me_req_size = SI_PM4_UCODE_SIZE * 4;
 		ce_req_size = SI_CE_UCODE_SIZE * 4;
 		rlc_req_size = SI_RLC_UCODE_SIZE * 4;
-		mc_req_size = OLAND_MC_UCODE_SIZE * 4;
+		mc_req_size = mc2_req_size = OLAND_MC_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(HAINAN_SMC_UCODE_SIZE, 4);
 		break;
 	default: BUG();
@@ -1657,16 +1660,22 @@ static int si_init_microcode(struct radeon_device *rdev)
 		err = -EINVAL;
 	}
 
-	snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name);
+	snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc2.bin", chip_name);
 	err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev);
-	if (err)
-		goto out;
-	if (rdev->mc_fw->size != mc_req_size) {
+	if (err) {
+		snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name);
+		err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev);
+		if (err)
+			goto out;
+	}
+	if ((rdev->mc_fw->size != mc_req_size) &&
+	    (rdev->mc_fw->size != mc2_req_size)) {
 		printk(KERN_ERR
 		       "si_mc: Bogus length %zu in firmware \"%s\"\n",
 		       rdev->mc_fw->size, fw_name);
 		err = -EINVAL;
 	}
+	DRM_INFO("%s: %zu bytes\n", fw_name, rdev->mc_fw->size);
 
 	snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name);
 	err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev);
-- 
1.9.1

[PATCH 3.13 037/160] drm/radeon: add support for newer mc ucode on CI (v2)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 277babc374f6ecab6af182554f5d9f35a7768755 upstream.

Fixes mclk stability on certain asics.

v2: print out mc firmware version used and size

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75992

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/cik.c          | 26 +++++++++++++++++---------
 drivers/gpu/drm/radeon/radeon_ucode.h |  4 +++-
 2 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index e8b1ed8..80ff45e 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -38,6 +38,7 @@ MODULE_FIRMWARE("radeon/BONAIRE_me.bin");
 MODULE_FIRMWARE("radeon/BONAIRE_ce.bin");
 MODULE_FIRMWARE("radeon/BONAIRE_mec.bin");
 MODULE_FIRMWARE("radeon/BONAIRE_mc.bin");
+MODULE_FIRMWARE("radeon/BONAIRE_mc2.bin");
 MODULE_FIRMWARE("radeon/BONAIRE_rlc.bin");
 MODULE_FIRMWARE("radeon/BONAIRE_sdma.bin");
 MODULE_FIRMWARE("radeon/BONAIRE_smc.bin");
@@ -46,6 +47,7 @@ MODULE_FIRMWARE("radeon/HAWAII_me.bin");
 MODULE_FIRMWARE("radeon/HAWAII_ce.bin");
 MODULE_FIRMWARE("radeon/HAWAII_mec.bin");
 MODULE_FIRMWARE("radeon/HAWAII_mc.bin");
+MODULE_FIRMWARE("radeon/HAWAII_mc2.bin");
 MODULE_FIRMWARE("radeon/HAWAII_rlc.bin");
 MODULE_FIRMWARE("radeon/HAWAII_sdma.bin");
 MODULE_FIRMWARE("radeon/HAWAII_smc.bin");
@@ -1702,7 +1704,7 @@ static int ci_mc_load_microcode(struct radeon_device *rdev)
 	const __be32 *fw_data;
 	u32 running, blackout = 0;
 	u32 *io_mc_regs;
-	int i, ucode_size, regs_size;
+	int i, regs_size, ucode_size = rdev->mc_fw->size / 4;
 
 	if (!rdev->mc_fw)
 		return -EINVAL;
@@ -1710,12 +1712,10 @@ static int ci_mc_load_microcode(struct radeon_device *rdev)
 	switch (rdev->family) {
 	case CHIP_BONAIRE:
 		io_mc_regs = (u32 *)&bonaire_io_mc_regs;
-		ucode_size = CIK_MC_UCODE_SIZE;
 		regs_size = BONAIRE_IO_MC_REGS_SIZE;
 		break;
 	case CHIP_HAWAII:
 		io_mc_regs = (u32 *)&hawaii_io_mc_regs;
-		ucode_size = HAWAII_MC_UCODE_SIZE;
 		regs_size = HAWAII_IO_MC_REGS_SIZE;
 		break;
 	default:
@@ -1782,7 +1782,7 @@ static int cik_init_microcode(struct radeon_device *rdev)
 	const char *chip_name;
 	size_t pfp_req_size, me_req_size, ce_req_size,
 		mec_req_size, rlc_req_size, mc_req_size = 0,
-		sdma_req_size, smc_req_size = 0;
+		sdma_req_size, smc_req_size = 0, mc2_req_size = 0;
 	char fw_name[30];
 	int err;
 
@@ -1796,7 +1796,8 @@ static int cik_init_microcode(struct radeon_device *rdev)
 		ce_req_size = CIK_CE_UCODE_SIZE * 4;
 		mec_req_size = CIK_MEC_UCODE_SIZE * 4;
 		rlc_req_size = BONAIRE_RLC_UCODE_SIZE * 4;
-		mc_req_size = CIK_MC_UCODE_SIZE * 4;
+		mc_req_size = BONAIRE_MC_UCODE_SIZE * 4;
+		mc2_req_size = BONAIRE_MC2_UCODE_SIZE * 4;
 		sdma_req_size = CIK_SDMA_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(BONAIRE_SMC_UCODE_SIZE, 4);
 		break;
@@ -1808,6 +1809,7 @@ static int cik_init_microcode(struct radeon_device *rdev)
 		mec_req_size = CIK_MEC_UCODE_SIZE * 4;
 		rlc_req_size = BONAIRE_RLC_UCODE_SIZE * 4;
 		mc_req_size = HAWAII_MC_UCODE_SIZE * 4;
+		mc2_req_size = HAWAII_MC2_UCODE_SIZE * 4;
 		sdma_req_size = CIK_SDMA_UCODE_SIZE * 4;
 		smc_req_size = ALIGN(HAWAII_SMC_UCODE_SIZE, 4);
 		break;
@@ -1903,16 +1905,22 @@ static int cik_init_microcode(struct radeon_device *rdev)
 
 	/* No SMC, MC ucode on APUs */
 	if (!(rdev->flags & RADEON_IS_IGP)) {
-		snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name);
+		snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc2.bin", chip_name);
 		err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev);
-		if (err)
-			goto out;
-		if (rdev->mc_fw->size != mc_req_size) {
+		if (err) {
+			snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name);
+			err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev);
+			if (err)
+				goto out;
+		}
+		if ((rdev->mc_fw->size != mc_req_size) &&
+		    (rdev->mc_fw->size != mc2_req_size)){
 			printk(KERN_ERR
 			       "cik_mc: Bogus length %zu in firmware \"%s\"\n",
 			       rdev->mc_fw->size, fw_name);
 			err = -EINVAL;
 		}
+		DRM_INFO("%s: %zu bytes\n", fw_name, rdev->mc_fw->size);
 
 		snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name);
 		err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev);
diff --git a/drivers/gpu/drm/radeon/radeon_ucode.h b/drivers/gpu/drm/radeon/radeon_ucode.h
index f415548..58d1293 100644
--- a/drivers/gpu/drm/radeon/radeon_ucode.h
+++ b/drivers/gpu/drm/radeon/radeon_ucode.h
@@ -61,8 +61,10 @@
 #define PITCAIRN_MC_UCODE_SIZE       7775
 #define VERDE_MC_UCODE_SIZE          7875
 #define OLAND_MC_UCODE_SIZE          7863
-#define CIK_MC_UCODE_SIZE            7866
+#define BONAIRE_MC_UCODE_SIZE        7866
+#define BONAIRE_MC2_UCODE_SIZE       7948
 #define HAWAII_MC_UCODE_SIZE         7933
+#define HAWAII_MC2_UCODE_SIZE        8091
 
 /* SDMA */
 #define CIK_SDMA_UCODE_SIZE          1050
-- 
1.9.1

[PATCH 3.13 038/160] drm/radeon: re-enable mclk dpm on R7 260X asics

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 7e1858f9aff7d608b3d0abad4bda0130de887b89 upstream.

If the new mc ucode is available.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/ci_dpm.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index d4ca530..318d226 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -21,8 +21,10 @@
  *
  */
 
+#include <linux/firmware.h>
 #include "drmP.h"
 #include "radeon.h"
+#include "radeon_ucode.h"
 #include "cikd.h"
 #include "r600_dpm.h"
 #include "ci_dpm.h"
@@ -5128,9 +5130,11 @@ int ci_dpm_init(struct radeon_device *rdev)
 	pi->mclk_dpm_key_disabled = 0;
 	pi->pcie_dpm_key_disabled = 0;
 
-	/* mclk dpm is unstable on some R7 260X cards */
-	if (rdev->pdev->device == 0x6658)
+	/* mclk dpm is unstable on some R7 260X cards with the old mc ucode */
+	if ((rdev->pdev->device == 0x6658) &&
+	    (rdev->mc_fw->size == (BONAIRE_MC_UCODE_SIZE * 4))) {
 		pi->mclk_dpm_key_disabled = 1;
+	}
 
 	pi->caps_sclk_ds = true;
 
-- 
1.9.1

[PATCH 3.13 039/160] drm/radeon: memory leak on bo reservation failure. v2

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Casasnovas <quentin.casasnovas@oracle.com>

commit 74073c9dd29905645feb6dee03c144657a9844cd upstream.

On bo reservation failure, we end up leaking fpriv.

v2 (chk): rebased and added missing free on vm failure as well

Fixes: 5e386b574cf7e1 ("drm/radeon: fix missing bo reservation")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
[ kamal: backport to 3.13-stable: omit radeon_vm_init() return check ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_kms.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 10a416e..9b2799c 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -545,8 +545,11 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 		radeon_vm_init(rdev, &fpriv->vm);
 
 		r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
-		if (r)
+		if (r) {
+			radeon_vm_fini(rdev, &fpriv->vm);
+			kfree(fpriv);
 			return r;
+		}
 
 		/* map the ib pool buffer read only into
 		 * virtual address space */
-- 
1.9.1

[PATCH 3.13 040/160] drm/radeon/si: make sure mc ucode is loaded before checking the size

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 8c79bae6a30f606b7a4e17c994bc5f72f8fdaf11 upstream.

Avoid a possible segfault.

Noticed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/si.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 925cac0..c6cfa44 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -1470,11 +1470,13 @@ static int si_mc_load_microcode(struct radeon_device *rdev)
 	const __be32 *fw_data;
 	u32 running, blackout = 0;
 	u32 *io_mc_regs;
-	int i, regs_size, ucode_size = rdev->mc_fw->size / 4;
+	int i, regs_size, ucode_size;
 
 	if (!rdev->mc_fw)
 		return -EINVAL;
 
+	ucode_size = rdev->mc_fw->size / 4;
+
 	switch (rdev->family) {
 	case CHIP_TAHITI:
 		io_mc_regs = (u32 *)&tahiti_io_mc_regs;
-- 
1.9.1

[PATCH 3.13 041/160] drm/radeon/ci: make sure mc ucode is loaded before checking the size

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit bcddee29b0b87af3aeda953840f97b356b24dc5e upstream.

Avoid a possible segfault.

Noticed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/cik.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 80ff45e..c8dc6d1 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -1704,11 +1704,13 @@ static int ci_mc_load_microcode(struct radeon_device *rdev)
 	const __be32 *fw_data;
 	u32 running, blackout = 0;
 	u32 *io_mc_regs;
-	int i, regs_size, ucode_size = rdev->mc_fw->size / 4;
+	int i, regs_size, ucode_size;
 
 	if (!rdev->mc_fw)
 		return -EINVAL;
 
+	ucode_size = rdev->mc_fw->size / 4;
+
 	switch (rdev->family) {
 	case CHIP_BONAIRE:
 		io_mc_regs = (u32 *)&bonaire_io_mc_regs;
-- 
1.9.1

[PATCH 3.13 042/160] init/Kconfig: move the trusted keyring config option to general setup

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Foley <pefoley2@pefoley.com>

commit 82c04ff89eba09d0e46e3f3649c6d3aa18e764a0 upstream.

The SYSTEM_TRUSTED_KEYRING config option is not in any menu, causing it
to show up in the toplevel of the kernel configuration.  Fix this by
moving it under the General Setup menu.

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 init/Kconfig | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index 66e6759..c3a1d7c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1633,6 +1633,18 @@ config MMAP_ALLOW_UNINITIALIZED
 
 	  See Documentation/nommu-mmap.txt for more information.
 
+config SYSTEM_TRUSTED_KEYRING
+	bool "Provide system-wide ring of trusted keys"
+	depends on KEYS
+	help
+	  Provide a system keyring to which trusted keys can be added.  Keys in
+	  the keyring are considered to be trusted.  Keys may be added at will
+	  by the kernel from compiled-in data and from hardware key stores, but
+	  userspace may only add extra keys if those keys can be verified by
+	  keys already in the keyring.
+
+	  Keys in this keyring are used by module signature checking.
+
 config PROFILING
 	bool "Profiling support"
 	help
@@ -1668,18 +1680,6 @@ config BASE_SMALL
 	default 0 if BASE_FULL
 	default 1 if !BASE_FULL
 
-config SYSTEM_TRUSTED_KEYRING
-	bool "Provide system-wide ring of trusted keys"
-	depends on KEYS
-	help
-	  Provide a system keyring to which trusted keys can be added.  Keys in
-	  the keyring are considered to be trusted.  Keys may be added at will
-	  by the kernel from compiled-in data and from hardware key stores, but
-	  userspace may only add extra keys if those keys can be verified by
-	  keys already in the keyring.
-
-	  Keys in this keyring are used by module signature checking.
-
 menuconfig MODULES
 	bool "Enable loadable module support"
 	option modules
-- 
1.9.1

[PATCH 3.13 043/160] mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Mizuma, Masayoshi" <m.mizuma@jp.fujitsu.com>

commit 7848a4bf51b34f41fcc9bd77e837126d99ae84e3 upstream.

soft lockup in freeing gigantic hugepage fixed in commit 55f67141a892 "mm:
hugetlb: fix softlockup when a large number of hugepages are freed." can
happen in return_unused_surplus_pages(), so let's fix it.

Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/hugetlb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index aad231c..c8c4a03 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1143,6 +1143,7 @@ static void return_unused_surplus_pages(struct hstate *h,
 	while (nr_pages--) {
 		if (!free_pool_huge_page(h, &node_states[N_MEMORY], 1))
 			break;
+		cond_resched_lock(&hugetlb_lock);
 	}
 }
 
-- 
1.9.1

[PATCH 3.13 044/160] thp: close race between split and zap huge pages

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

commit b5a8cad376eebbd8598642697e92a27983aee802 upstream.

Sasha Levin has reported two THP BUGs[1][2].  I believe both of them
have the same root cause.  Let's look to them one by one.

The first bug[1] is "kernel BUG at mm/huge_memory.c:1829!".  It's
BUG_ON(mapcount != page_mapcount(page)) in __split_huge_page().  From my
testing I see that page_mapcount() is higher than mapcount here.

I think it happens due to race between zap_huge_pmd() and
page_check_address_pmd().  page_check_address_pmd() misses PMD which is
under zap:

	CPU0						CPU1
						zap_huge_pmd()
						  pmdp_get_and_clear()
__split_huge_page()
  anon_vma_interval_tree_foreach()
    __split_huge_page_splitting()
      page_check_address_pmd()
        mm_find_pmd()
	  /*
	   * We check if PMD present without taking ptl: no
	   * serialization against zap_huge_pmd(). We miss this PMD,
	   * it's not accounted to 'mapcount' in __split_huge_page().
	   */
	  pmd_present(pmd) == 0

  BUG_ON(mapcount != page_mapcount(page)) // CRASH!!!

						  page_remove_rmap(page)
						    atomic_add_negative(-1, &page->_mapcount)

The second bug[2] is "kernel BUG at mm/huge_memory.c:1371!".
It's VM_BUG_ON_PAGE(!PageHead(page), page) in zap_huge_pmd().

This happens in similar way:

	CPU0						CPU1
						zap_huge_pmd()
						  pmdp_get_and_clear()
						  page_remove_rmap(page)
						    atomic_add_negative(-1, &page->_mapcount)
__split_huge_page()
  anon_vma_interval_tree_foreach()
    __split_huge_page_splitting()
      page_check_address_pmd()
        mm_find_pmd()
	  pmd_present(pmd) == 0	/* The same comment as above */
  /*
   * No crash this time since we already decremented page->_mapcount in
   * zap_huge_pmd().
   */
  BUG_ON(mapcount != page_mapcount(page))

  /*
   * We split the compound page here into small pages without
   * serialization against zap_huge_pmd()
   */
  __split_huge_page_refcount()
						VM_BUG_ON_PAGE(!PageHead(page), page); // CRASH!!!

So my understanding the problem is pmd_present() check in mm_find_pmd()
without taking page table lock.

The bug was introduced by me commit with commit 117b0791ac42. Sorry for
that. :(

Let's open code mm_find_pmd() in page_check_address_pmd() and do the
check under page table lock.

Note that __page_check_address() does the same for PTE entires
if sync != 0.

I've stress tested split and zap code paths for 36+ hours by now and
don't see crashes with the patch applied. Before it took <20 min to
trigger the first bug and few hours for second one (if we ignore
first).

[1] https://lkml.kernel.org/g/<53440991.9090001@oracle.com>
[2] https://lkml.kernel.org/g/<5310C56C.60709@oracle.com>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/huge_memory.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 39c8e2e..a2256e0 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1610,16 +1610,23 @@ pmd_t *page_check_address_pmd(struct page *page,
 			      enum page_check_address_pmd_flag flag,
 			      spinlock_t **ptl)
 {
+	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 
 	if (address & ~HPAGE_PMD_MASK)
 		return NULL;
 
-	pmd = mm_find_pmd(mm, address);
-	if (!pmd)
+	pgd = pgd_offset(mm, address);
+	if (!pgd_present(*pgd))
 		return NULL;
+	pud = pud_offset(pgd, address);
+	if (!pud_present(*pud))
+		return NULL;
+	pmd = pmd_offset(pud, address);
+
 	*ptl = pmd_lock(mm, pmd);
-	if (pmd_none(*pmd))
+	if (!pmd_present(*pmd))
 		goto unlock;
 	if (pmd_page(*pmd) != page)
 		goto unlock;
-- 
1.9.1

[PATCH 3.13 045/160] coredump: fix va_list corruption

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 404ca80eb5c2727d78cd517d12108b040c522e12 upstream.

A va_list needs to be copied in case it needs to be used twice.

Thanks to Hugh for debugging this issue, leading to various panics.

Tested:

  lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern

'produce_core' is simply : main() { *(int *)0 = 1;}

  lpq84:~# ./produce_core
  Segmentation fault (core dumped)
  lpq84:~# dmesg | tail -1
  [  614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed

Notice the last argument was replaced by a NULL (we were lucky enough to
not crash, but do not try this on your production machine !)

After fix :

  lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
  lpq83:~# ./produce_core
  Segmentation fault
  lpq83:~# dmesg | tail -1
  [  740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed

Fixes: 5fe9d8ca21cc ("coredump: cn_vprintf() has no reason to call vsnprintf() twice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Hugh Dickins <hughd@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/coredump.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/coredump.c b/fs/coredump.c
index bc3fbcd..fab2568 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -74,10 +74,15 @@ static int expand_corename(struct core_name *cn, int size)
 static int cn_vprintf(struct core_name *cn, const char *fmt, va_list arg)
 {
 	int free, need;
+	va_list arg_copy;
 
 again:
 	free = cn->size - cn->used;
-	need = vsnprintf(cn->corename + cn->used, free, fmt, arg);
+
+	va_copy(arg_copy, arg);
+	need = vsnprintf(cn->corename + cn->used, free, fmt, arg_copy);
+	va_end(arg_copy);
+
 	if (need < free) {
 		cn->used += need;
 		return 0;
-- 
1.9.1

[PATCH 3.13 046/160] mm/numa: Remove BUG_ON() in __handle_mm_fault()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rik van Riel <riel@redhat.com>

commit 107437febd495a50e2cd09c81bbaa84d30e57b07 upstream.

Changing PTEs and PMDs to pte_numa & pmd_numa is done with the
mmap_sem held for reading, which means a pmd can be instantiated
and turned into a numa one while __handle_mm_fault() is examining
the value of old_pmd.

If that happens, __handle_mm_fault() should just return and let
the page fault retry, instead of throwing an oops. This is
handled by the test for pmd_trans_huge(*pmd) below.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Sunil Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: linux-mm@kvack.org
Cc: lwoodman@redhat.com
Cc: dave.hansen@intel.com
Link: http://lkml.kernel.org/r/20140429153615.2d72098e@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/memory.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index dda27b9..95257f5 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3747,9 +3747,6 @@ static int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 		}
 	}
 
-	/* THP should already have been handled */
-	BUG_ON(pmd_numa(*pmd));
-
 	/*
 	 * Use __pte_alloc instead of pte_alloc_map, because we can't
 	 * run pte_offset_map on the pmd, if an huge pmd could
-- 
1.9.1

[PATCH 3.13 047/160] iwlwifi: mvm: disable beacon filtering

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit 7bacc782270ff7db3b9f29fa5d24ad2ee1e8e81d upstream.

This feature has been causing trouble - disable it for now.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index c68e4ae..b3338b1 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -619,7 +619,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_remove_mac;
 
-	if (!mvm->bf_allowed_vif &&
+	if (!mvm->bf_allowed_vif && false &&
 	    vif->type == NL80211_IFTYPE_STATION && !vif->p2p &&
 	    mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BF_UPDATED){
 		mvm->bf_allowed_vif = mvmvif;
-- 
1.9.1

[PATCH 3.13 048/160] powerpc/tm: Disable IRQ in tm_recheckpoint

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit e6b8fd028b584ffca7a7255b8971f254932c9fce upstream.

We can't take an IRQ when we're about to do a trechkpt as our GPR state is set
to user GPR values.

We've hit this when running some IBM Java stress tests in the lab resulting in
the following dump:

  cpu 0x3f: Vector: 700 (Program Check) at [c000000007eb3d40]
      pc: c000000000050074: restore_gprs+0xc0/0x148
      lr: 00000000b52a8184
      sp: ac57d360
     msr: 8000000100201030
    current = 0xc00000002c500000
    paca    = 0xc000000007dbfc00     softe: 0     irq_happened: 0x00
      pid   = 34535, comm = Pooled Thread #
  R00 = 00000000b52a8184   R16 = 00000000b3e48fda
  R01 = 00000000ac57d360   R17 = 00000000ade79bd8
  R02 = 00000000ac586930   R18 = 000000000fac9bcc
  R03 = 00000000ade60000   R19 = 00000000ac57f930
  R04 = 00000000f6624918   R20 = 00000000ade79be8
  R05 = 00000000f663f238   R21 = 00000000ac218a54
  R06 = 0000000000000002   R22 = 000000000f956280
  R07 = 0000000000000008   R23 = 000000000000007e
  R08 = 000000000000000a   R24 = 000000000000000c
  R09 = 00000000b6e69160   R25 = 00000000b424cf00
  R10 = 0000000000000181   R26 = 00000000f66256d4
  R11 = 000000000f365ec0   R27 = 00000000b6fdcdd0
  R12 = 00000000f66400f0   R28 = 0000000000000001
  R13 = 00000000ada71900   R29 = 00000000ade5a300
  R14 = 00000000ac2185a8   R30 = 00000000f663f238
  R15 = 0000000000000004   R31 = 00000000f6624918
  pc  = c000000000050074 restore_gprs+0xc0/0x148
  cfar= c00000000004fe28 dont_restore_vec+0x1c/0x1a4
  lr  = 00000000b52a8184
  msr = 8000000100201030   cr  = 24804888
  ctr = 0000000000000000   xer = 0000000000000000   trap =  700

This moves tm_recheckpoint to a C function and moves the tm_restore_sprs into
that function.  It then adds IRQ disabling over the trechkpt critical section.
It also sets the TEXASR FS in the signals code to ensure this is never set now
that we explictly write the TM sprs in tm_recheckpoint.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ luis: backported to 3.11: used mikey's backport to 3.10, which picks
  the definition of TEXASR_FS from commit
  e4e38121507a27d2ccc4b28d9e7fc4818a12c44c ("KVM: PPC: Book3S HV: Add
  transactional memory support") ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/powerpc/include/asm/reg.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fa8388e..637f513 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -213,6 +213,7 @@
 #define SPRN_ACOP	0x1F	/* Available Coprocessor Register */
 #define SPRN_TFIAR	0x81	/* Transaction Failure Inst Addr   */
 #define SPRN_TEXASR	0x82	/* Transaction EXception & Summary */
+#define   TEXASR_FS	__MASK(63-36)	/* Transaction Failure Summary */
 #define SPRN_TEXASRU	0x83	/* ''	   ''	   ''	 Upper 32  */
 #define SPRN_TFHAR	0x80	/* Transaction Failure Handler Addr */
 #define SPRN_CTRLF	0x088
-- 
1.9.1

[PATCH 3.13 049/160] ACPI / EC: Process rather than discard events in acpi_ec_clear

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kieran Clancy <clancy.kieran@gmail.com>

commit 3eba563e280101209bad27d40bfc83ddf1489234 upstream.

Address a regression caused by commit ad332c8a4533:
(ACPI / EC: Clear stale EC events on Samsung systems)

After the earlier patch, there was found to be a race condition on some
earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was
sometimes discarding a new EC event before its GPE was triggered by the
system. In the case of these systems, this meant that the "lid open"
event was not registered on resume if that was the cause of the wake,
leading to problems when attempting to close the lid to suspend again.

After testing on a number of Samsung systems, both those affected by the
previous EC bug and those affected by the race condition, it seemed that
the best course of action was to process rather than discard the events.
On Samsung systems which accumulate stale EC events, there does not seem
to be any adverse side-effects of running the associated _Q methods.

This patch adds an argument to the static function acpi_ec_sync_query so
that it may be used within the acpi_ec_clear loop in place of
acpi_ec_query_unlocked which was used previously.

With thanks to Stefan Biereigel for reporting the issue, and for all the
people who helped test the new patch on affected systems.

Fixes: ad332c8a4533 (ACPI / EC: Clear stale EC events on Samsung systems)
References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173
Reported-by: Stefan Biereigel <stefan@biereigel.de>
Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com>
Tested-by: Stefan Biereigel <stefan@biereigel.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Nicolas Porcel <nicolasporcel06@gmail.com>
Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com>
Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com>
Tested-by: Giannis Koutsou <giannis.koutsou@gmail.com>
Tested-by: Kieran Clancy <clancy.kieran@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/acpi/ec.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index b4f15c6..98e9985 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -211,13 +211,13 @@ unlock:
 	spin_unlock_irqrestore(&ec->lock, flags);
 }
 
-static int acpi_ec_sync_query(struct acpi_ec *ec);
+static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data);
 
 static int ec_check_sci_sync(struct acpi_ec *ec, u8 state)
 {
 	if (state & ACPI_EC_FLAG_SCI) {
 		if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
-			return acpi_ec_sync_query(ec);
+			return acpi_ec_sync_query(ec, NULL);
 	}
 	return 0;
 }
@@ -469,10 +469,8 @@ acpi_handle ec_get_handle(void)
 
 EXPORT_SYMBOL(ec_get_handle);
 
-static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 *data);
-
 /*
- * Clears stale _Q events that might have accumulated in the EC.
+ * Process _Q events that might have accumulated in the EC.
  * Run with locked ec mutex.
  */
 static void acpi_ec_clear(struct acpi_ec *ec)
@@ -481,7 +479,7 @@ static void acpi_ec_clear(struct acpi_ec *ec)
 	u8 value = 0;
 
 	for (i = 0; i < ACPI_EC_CLEAR_MAX; i++) {
-		status = acpi_ec_query_unlocked(ec, &value);
+		status = acpi_ec_sync_query(ec, &value);
 		if (status || !value)
 			break;
 	}
@@ -608,13 +606,18 @@ static void acpi_ec_run(void *cxt)
 	kfree(handler);
 }
 
-static int acpi_ec_sync_query(struct acpi_ec *ec)
+static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data)
 {
 	u8 value = 0;
 	int status;
 	struct acpi_ec_query_handler *handler, *copy;
-	if ((status = acpi_ec_query_unlocked(ec, &value)))
+
+	status = acpi_ec_query_unlocked(ec, &value);
+	if (data)
+		*data = value;
+	if (status)
 		return status;
+
 	list_for_each_entry(handler, &ec->list, node) {
 		if (value == handler->query_bit) {
 			/* have custom handler for this bit */
@@ -638,7 +641,7 @@ static void acpi_ec_gpe_query(void *ec_cxt)
 	if (!ec)
 		return;
 	mutex_lock(&ec->mutex);
-	acpi_ec_sync_query(ec);
+	acpi_ec_sync_query(ec, NULL);
 	mutex_unlock(&ec->mutex);
 }
 
-- 
1.9.1

[PATCH 3.13 050/160] ath9k: Fix sequence number assignment for non-data frames

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helmut Schaa <helmut.schaa@googlemail.com>

commit 5998be879719384af2014b79697eed6e38ee2706 upstream.

Since commit 558ff225de80ac95b132d3a115ddadcd64498b4f (ath9k: fix
ps-poll responses under a-mpdu sessions) non-data frames would have
gotten a sequence number from a TIDs sequence counter instead of
using the global sequence counter.

This can lead to instable connections.

To fix this only select the correct TID if we are processing a
data frame. Furthermore, prevent non-data frames to get a sequence
number from a TID sequence counter by adding a check to
ath_tx_setup_buffer.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Fejes József <jozsef.fejes@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 0471c6a..6fa2d35 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2074,7 +2074,7 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 
 	ATH_TXBUF_RESET(bf);
 
-	if (tid) {
+	if (tid && ieee80211_is_data_present(hdr->frame_control)) {
 		fragno = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
 		seqno = tid->seq_next;
 		hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT);
@@ -2197,7 +2197,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		txq->stopped = true;
 	}
 
-	if (txctl->an)
+	if (txctl->an && ieee80211_is_data_present(hdr->frame_control))
 		tid = ath_get_skb_tid(sc, txctl->an, skb);
 
 	if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {
-- 
1.9.1

[PATCH 3.13 051/160] xhci: Switch Intel Lynx Point ports to EHCI on shutdown.

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis Turischev <denis.turischev@compulab.co.il>

commit c09ec25d3684cad74d851c0f028a495999591279 upstream.

The same issue like with Panther Point chipsets. If the USB ports are
switched to xHCI on shutdown, the xHCI host will send a spurious interrupt,
which will wake the system. Some BIOS have work around for this, but not all.
One example is Compulab's mini-desktop, the Intense-PC2.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.

This patch should be backported to stable kernels as old as 3.12,
that contain the commit 638298dc66ea36623dbc2757a24fc2c4ab41b016
"xhci: Fix spurious wakeups after S5 on Haswell"

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/host/xhci-pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index d069224..67394da 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -134,6 +134,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 */
 		if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
 			xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
-- 
1.9.1

[PATCH 3.13 052/160] iio: adc: at91_adc: Repair broken platform_data support

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

commit 467a44b0372d8268ce5bd90e58bde7db51c1d476 upstream.

Trying to use the at91_adc driver while not using device tree is ending up in a
kernel crash:

Unable to handle kernel NULL pointer dereference at virtual address 00000004
[...]
[<c01f3510>] (at91_adc_probe) from [<c0183828>] (platform_drv_probe+0x18/0x48)
[<c0183828>] (platform_drv_probe) from [<c01824a4>] (driver_probe_device+0x100/0x218)
[<c01824a4>] (driver_probe_device) from [<c0182648>] (__driver_attach+0x8c/0x90)
[<c0182648>] (__driver_attach) from [<c0180de4>] (bus_for_each_dev+0x58/0x88)
[<c0180de4>] (bus_for_each_dev) from [<c0181c7c>] (bus_add_driver+0xd4/0x1d4)
[<c0181c7c>] (bus_add_driver) from [<c0182c40>] (driver_register+0x78/0xf4)
[<c0182c40>] (driver_register) from [<c0008998>] (do_one_initcall+0xe8/0x14c)
[<c0008998>] (do_one_initcall) from [<c02f0b50>] (kernel_init_freeable+0xec/0x1b4)
[<c02f0b50>] (kernel_init_freeable) from [<c022acdc>] (kernel_init+0x8/0xe4)
[<c022acdc>] (kernel_init) from [<c0009670>] (ret_from_fork+0x14/0x24)

This is because the at91_adc_caps structure is mandatory but is not filled when
using platform_data. Correct that by using an id_table. It ensues that the
driver will not match "at91_adc" anymore but it was crashing anyway.

Fixes: c46016665fff (iio: at91: ADC start-up time calculation changed since at91sam9x5)

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/iio/adc/at91_adc.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 5b1aa02..bbba014 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -765,14 +765,17 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st,
 	if (!pdata)
 		return -EINVAL;
 
+	st->caps = (struct at91_adc_caps *)
+			platform_get_device_id(pdev)->driver_data;
+
 	st->use_external = pdata->use_external_triggers;
 	st->vref_mv = pdata->vref;
 	st->channels_mask = pdata->channels_used;
-	st->num_channels = pdata->num_channels;
+	st->num_channels = st->caps->num_channels;
 	st->startup_time = pdata->startup_time;
 	st->trigger_number = pdata->trigger_number;
 	st->trigger_list = pdata->trigger_list;
-	st->registers = pdata->registers;
+	st->registers = &st->caps->registers;
 
 	return 0;
 }
@@ -1101,7 +1104,6 @@ static int at91_adc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static struct at91_adc_caps at91sam9260_caps = {
 	.calc_startup_ticks = calc_startup_ticks_9260,
 	.num_channels = 4,
@@ -1154,11 +1156,27 @@ static const struct of_device_id at91_adc_dt_ids[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
-#endif
+
+static const struct platform_device_id at91_adc_ids[] = {
+	{
+		.name = "at91sam9260-adc",
+		.driver_data = (unsigned long)&at91sam9260_caps,
+	}, {
+		.name = "at91sam9g45-adc",
+		.driver_data = (unsigned long)&at91sam9g45_caps,
+	}, {
+		.name = "at91sam9x5-adc",
+		.driver_data = (unsigned long)&at91sam9x5_caps,
+	}, {
+		/* terminator */
+	}
+};
+MODULE_DEVICE_TABLE(platform, at91_adc_ids);
 
 static struct platform_driver at91_adc_driver = {
 	.probe = at91_adc_probe,
 	.remove = at91_adc_remove,
+	.id_table = at91_adc_ids,
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .of_match_table = of_match_ptr(at91_adc_dt_ids),
-- 
1.9.1

[PATCH 3.13 053/160] iio: querying buffer scan_mask should return 0/1

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alec Berg <alecaberg@chromium.org>

commit 2076a20fc1a06f7b0333c62a2bb4eeeac7ed1bcb upstream.

Ensure that querying the IIO buffer scan_mask returns a value of
0 or 1. Currently querying the scan mask has the value returned
by test_bit(), which returns either true or false. For some
architectures test_bit() may return -1 for true, which will appear
to return an error when returning from iio_scan_mask_query().

Additionally, it's important for the sysfs interface to consistently
return the same thing when querying the scan_mask.

Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/iio/industrialio-buffer.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 7f9152c..4bf831a 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -136,7 +136,8 @@ static ssize_t iio_scan_el_show(struct device *dev,
 	int ret;
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
-	ret = test_bit(to_iio_dev_attr(attr)->address,
+	/* Ensure ret is 0 or 1. */
+	ret = !!test_bit(to_iio_dev_attr(attr)->address,
 		       indio_dev->buffer->scan_mask);
 
 	return sprintf(buf, "%d\n", ret);
@@ -837,7 +838,8 @@ int iio_scan_mask_query(struct iio_dev *indio_dev,
 	if (!buffer->scan_mask)
 		return 0;
 
-	return test_bit(bit, buffer->scan_mask);
+	/* Ensure return value is 0 or 1. */
+	return !!test_bit(bit, buffer->scan_mask);
 };
 EXPORT_SYMBOL_GPL(iio_scan_mask_query);
 
-- 
1.9.1

[PATCH 3.13 054/160] iio: cm36651: Fix i2c client leak and possible NULL pointer dereference

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit d0a588a57c2b0748df8307a0865a1bbbf1624c53 upstream.

During probe the driver allocates dummy I2C devices (i2c_new_dummy())
but they aren't unregistered during driver remove or probe failure.

Additionally driver does not check the return value of i2c_new_dummy().
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later
dereferenced by i2c_smbus_{read,write}_data() functions.

Fix issues by properly checking for i2c_new_dummy() return value and
unregistering I2C devices on driver remove or probe failure.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/iio/light/cm36651.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c
index 0922e39..203883c 100644
--- a/drivers/iio/light/cm36651.c
+++ b/drivers/iio/light/cm36651.c
@@ -628,7 +628,19 @@ static int cm36651_probe(struct i2c_client *client,
 	cm36651->client = client;
 	cm36651->ps_client = i2c_new_dummy(client->adapter,
 						     CM36651_I2C_ADDR_PS);
+	if (!cm36651->ps_client) {
+		dev_err(&client->dev, "%s: new i2c device failed\n", __func__);
+		ret = -ENODEV;
+		goto error_disable_reg;
+	}
+
 	cm36651->ara_client = i2c_new_dummy(client->adapter, CM36651_ARA);
+	if (!cm36651->ara_client) {
+		dev_err(&client->dev, "%s: new i2c device failed\n", __func__);
+		ret = -ENODEV;
+		goto error_i2c_unregister_ps;
+	}
+
 	mutex_init(&cm36651->lock);
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->channels = cm36651_channels;
@@ -640,7 +652,7 @@ static int cm36651_probe(struct i2c_client *client,
 	ret = cm36651_setup_reg(cm36651);
 	if (ret) {
 		dev_err(&client->dev, "%s: register setup failed\n", __func__);
-		goto error_disable_reg;
+		goto error_i2c_unregister_ara;
 	}
 
 	ret = request_threaded_irq(client->irq, NULL, cm36651_irq_handler,
@@ -648,7 +660,7 @@ static int cm36651_probe(struct i2c_client *client,
 							"cm36651", indio_dev);
 	if (ret) {
 		dev_err(&client->dev, "%s: request irq failed\n", __func__);
-		goto error_disable_reg;
+		goto error_i2c_unregister_ara;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -661,6 +673,10 @@ static int cm36651_probe(struct i2c_client *client,
 
 error_free_irq:
 	free_irq(client->irq, indio_dev);
+error_i2c_unregister_ara:
+	i2c_unregister_device(cm36651->ara_client);
+error_i2c_unregister_ps:
+	i2c_unregister_device(cm36651->ps_client);
 error_disable_reg:
 	regulator_disable(cm36651->vled_reg);
 	return ret;
@@ -674,6 +690,8 @@ static int cm36651_remove(struct i2c_client *client)
 	iio_device_unregister(indio_dev);
 	regulator_disable(cm36651->vled_reg);
 	free_irq(client->irq, indio_dev);
+	i2c_unregister_device(cm36651->ps_client);
+	i2c_unregister_device(cm36651->ara_client);
 
 	return 0;
 }
-- 
1.9.1

[PATCH 3.13 055/160] libata: Update queued trim blacklist for M5x0 drives

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Martin K. Petersen" <martin.petersen@oracle.com>

commit d121f7d0cbb875abce249dbf7eb191f9bafe80b7 upstream.

Crucial/Micron M500 drives properly support queued DSM TRIM starting
with firmware MU05. Update the blacklist so we only disable queued trim
for older firmware releases.

Early M550 series drives suffer from the same issue as M500. A bugfix
firmware is in the pipeline but not ready yet. Until then, blacklist
queued trim for M550.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Chris Samuel <chris@csamuel.org>
Cc: Marc MERLIN <marc@merlins.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/ata/libata-core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8cb2522..2897dbe 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4224,8 +4224,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* devices that don't properly handle queued TRIM commands */
-	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Crucial_CT???M500SSD*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M500*",		"MU0[1-4]*",	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M500SSD*",	"MU0[1-4]*",	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M550*",		NULL,		ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M550SSD*",	NULL,		ATA_HORKAGE_NO_NCQ_TRIM, },
 
 	/*
 	 * Some WD SATA-I drives spin up and down erratically when the link
-- 
1.9.1

[PATCH 3.13 056/160] pata_at91: fix ata_host_activate() failure handling

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

commit 27aa64b9d1bd0d23fd692c91763a48309b694311 upstream.

Add missing clk_put() call to ata_host_activate() failure path.

Sergei says,

  "Hm, I have once fixed that (see that *if* (!ret)) but looks like a
   later commit 477c87e90853d136b188c50c0e4a93d01cad872e (ARM:
   at91/pata: use gpio_is_valid to check the gpio) broke it again. :-(
   Would be good if the changelog did mention that..."

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/ata/pata_at91.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index d63ee8f..e3a49df 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -408,12 +408,13 @@ static int pata_at91_probe(struct platform_device *pdev)
 
 	host->private_data = info;
 
-	return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
-			gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
-			irq_flags, &pata_at91_sht);
+	ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
+				gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
+				irq_flags, &pata_at91_sht);
+	if (ret)
+		goto err_put;
 
-	if (!ret)
-		return 0;
+	return 0;
 
 err_put:
 	clk_put(info->mck);
-- 
1.9.1

[PATCH 3.13 057/160] ext4: avoid possible overflow in ext4_map_blocks()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit e861b5e9a47bd8c6a7491a2b9f6e9a230b1b8e86 upstream.

The ext4_map_blocks() function returns the number of blocks which
satisfying the caller's request.  This number of blocks requested by
the caller is specified by an unsigned integer, but the return value
of ext4_map_blocks() is a signed integer (to accomodate error codes
per the kernel's standard error signalling convention).

Historically, overflows could never happen since mballoc() will refuse
to allocate more than 2048 blocks at a time (which is something we
should fix), and if the blocks were already allocated, the fact that
there would be some number of intervening metadata blocks pretty much
guaranteed that there could never be a contiguous region of data
blocks that was greater than 2**31 blocks.

However, this is now possible if there is a file system which is a bit
bigger than 8TB, and is created using the new mke2fs hugeblock
feature, which can create a perfectly contiguous file.  In that case,
if a userspace program attempted to call fallocate() on this already
fully allocated file, it's possible that ext4_map_blocks() could
return a number large enough that it would overflow a signed integer,
resulting in a ext4 thinking that the ext4_map_blocks() call had
failed with some strange error code.

Since ext4_map_blocks() is always free to return a smaller number of
blocks than what was requested by the caller, fix this by capping the
number of blocks that ext4_map_blocks() will ever try to map to 2**31
- 1.  In practice this should never get hit, except by someone
deliberately trying to provke the above-described bug.

Thanks to the PaX team for asking whethre this could possibly happen
in some off-line discussions about using some static code checking
technology they are developing to find bugs in kernel code.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/ext4/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3617e33..18e1871 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -515,6 +515,12 @@ int ext4_map_blocks(handle_t *handle, struct inode *inode,
 		  "logical block %lu\n", inode->i_ino, flags, map->m_len,
 		  (unsigned long) map->m_lblk);
 
+	/*
+	 * ext4_map_blocks returns an int, and m_len is an unsigned int
+	 */
+	if (unlikely(map->m_len > INT_MAX))
+		map->m_len = INT_MAX;
+
 	/* Lookup extent status tree firstly */
 	if (ext4_es_lookup_extent(inode, map->m_lblk, &es)) {
 		ext4_es_lru_add(inode);
-- 
1.9.1

[PATCH 3.13 058/160] ext4: FIBMAP ioctl causes BUG_ON due to handle EXT_MAX_BLOCKS

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kazuya Mio <k-mio@sx.jp.nec.com>

commit 4adb6ab3e0fa71363a5ef229544b2d17de6600d7 upstream.

When we try to get 2^32-1 block of the file which has the extent
(ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON
in ext4_ext_put_gap_in_cache().

To avoid the problem, ext4_map_blocks() needs to check the file logical block
number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot
handle 2^32-1 because the maximum file logical block number is 2^32-2.

Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid.
So ext4_map_blocks() should also return the same errno.

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/ext4/inode.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 18e1871..8ccbe9a 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -521,6 +521,10 @@ int ext4_map_blocks(handle_t *handle, struct inode *inode,
 	if (unlikely(map->m_len > INT_MAX))
 		map->m_len = INT_MAX;
 
+	/* We can handle the block number less than EXT_MAX_BLOCKS */
+	if (unlikely(map->m_lblk >= EXT_MAX_BLOCKS))
+		return -EIO;
+
 	/* Lookup extent status tree firstly */
 	if (ext4_es_lookup_extent(inode, map->m_lblk, &es)) {
 		ext4_es_lru_add(inode);
-- 
1.9.1

[PATCH 3.13 059/160] ext4: note the error in ext4_end_bio()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <willy@linux.intel.com>

commit 9503c67c93ed0b95ba62d12d1fd09da6245dbdd6 upstream.

ext4_end_bio() currently throws away the error that it receives.  Chances
are this is part of a spate of errors, one of which will end up getting
the error returned to userspace somehow, but we shouldn't take that risk.
Also print out the errno to aid in debug.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/ext4/page-io.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index d488f80..bb621a5 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -308,13 +308,14 @@ static void ext4_end_bio(struct bio *bio, int error)
 	if (error) {
 		struct inode *inode = io_end->inode;
 
-		ext4_warning(inode->i_sb, "I/O error writing to inode %lu "
+		ext4_warning(inode->i_sb, "I/O error %d writing to inode %lu "
 			     "(offset %llu size %ld starting block %llu)",
-			     inode->i_ino,
+			     error, inode->i_ino,
 			     (unsigned long long) io_end->offset,
 			     (long) io_end->size,
 			     (unsigned long long)
 			     bi_sector >> (inode->i_blkbits - 9));
+		mapping_set_error(inode->i_mapping, error);
 	}
 
 	if (io_end->flag & EXT4_IO_END_UNWRITTEN) {
-- 
1.9.1

[PATCH 3.13 060/160] ext4: fix jbd2 warning under heavy xattr load

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit ec4cb1aa2b7bae18dd8164f2e9c7c51abcf61280 upstream.

When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:

WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()

CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G    W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
 [<ffffffff816311b0>] dump_stack+0x19/0x1b
 [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90
 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
 [<ffffffff8119421e>] setxattr+0x13e/0x1e0
 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b

The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:

CPU1                                CPU2
ext4_xattr_release_block()          ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
  le32_add_cpu(&BHDR(bh)->h_refcount, -1);
  unlock_buffer(bh);
                                    lock_buffer(bh);
                                    /* True */
                                    if (BHDR(bh)->h_refcount == cpu_to_le32(1))
                                      get_bh(bh);
                                      ext4_free_blocks()
                                        ...
                                        jbd2_journal_forget()
                                          jbd2_journal_unfile_buffer()
                                          -> JH is gone
  error = ext4_handle_dirty_xattr_block(handle, inode, bh);
  -> triggers the warning

We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.

Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/ext4/xattr.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 1423c48..298e9c8 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -517,8 +517,8 @@ static void ext4_xattr_update_super_block(handle_t *handle,
 }
 
 /*
- * Release the xattr block BH: If the reference count is > 1, decrement
- * it; otherwise free the block.
+ * Release the xattr block BH: If the reference count is > 1, decrement it;
+ * otherwise free the block.
  */
 static void
 ext4_xattr_release_block(handle_t *handle, struct inode *inode,
@@ -538,16 +538,31 @@ ext4_xattr_release_block(handle_t *handle, struct inode *inode,
 		if (ce)
 			mb_cache_entry_free(ce);
 		get_bh(bh);
+		unlock_buffer(bh);
 		ext4_free_blocks(handle, inode, bh, 0, 1,
 				 EXT4_FREE_BLOCKS_METADATA |
 				 EXT4_FREE_BLOCKS_FORGET);
-		unlock_buffer(bh);
 	} else {
 		le32_add_cpu(&BHDR(bh)->h_refcount, -1);
 		if (ce)
 			mb_cache_entry_release(ce);
+		/*
+		 * Beware of this ugliness: Releasing of xattr block references
+		 * from different inodes can race and so we have to protect
+		 * from a race where someone else frees the block (and releases
+		 * its journal_head) before we are done dirtying the buffer. In
+		 * nojournal mode this race is harmless and we actually cannot
+		 * call ext4_handle_dirty_xattr_block() with locked buffer as
+		 * that function can call sync_dirty_buffer() so for that case
+		 * we handle the dirtying after unlocking the buffer.
+		 */
+		if (ext4_handle_valid(handle))
+			error = ext4_handle_dirty_xattr_block(handle, inode,
+							      bh);
 		unlock_buffer(bh);
-		error = ext4_handle_dirty_xattr_block(handle, inode, bh);
+		if (!ext4_handle_valid(handle))
+			error = ext4_handle_dirty_xattr_block(handle, inode,
+							      bh);
 		if (IS_SYNC(inode))
 			ext4_handle_sync(handle);
 		dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
-- 
1.9.1

[PATCH 3.13 061/160] ext4: move ext4_update_i_disksize() into mpage_map_and_submit_extent()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 622cad1325e404598fe3b148c3fa640dbaabc235 upstream.

The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent().  Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize.  That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:

      CPU #1                                 CPU #2

   down_write(&i_data_sem)
   Modify i_disk_size
   up_write(&i_data_sem)
                                        down_write(&i_data_sem)
                                        Modify i_disk_size
                                        Copy i_disk_size to on-disk inode
                                        up_write(&i_data_sem)
   Copy i_disk_size to on-disk inode

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/ext4/ext4.h  | 17 -----------------
 fs/ext4/inode.c | 16 +++++++++++++---
 2 files changed, 13 insertions(+), 20 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index d3a534f..3a603a8 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -2462,23 +2462,6 @@ static inline void ext4_update_i_disksize(struct inode *inode, loff_t newsize)
 	up_write(&EXT4_I(inode)->i_data_sem);
 }
 
-/*
- * Update i_disksize after writeback has been started. Races with truncate
- * are avoided by checking i_size under i_data_sem.
- */
-static inline void ext4_wb_update_i_disksize(struct inode *inode, loff_t newsize)
-{
-	loff_t i_size;
-
-	down_write(&EXT4_I(inode)->i_data_sem);
-	i_size = i_size_read(inode);
-	if (newsize > i_size)
-		newsize = i_size;
-	if (newsize > EXT4_I(inode)->i_disksize)
-		EXT4_I(inode)->i_disksize = newsize;
-	up_write(&EXT4_I(inode)->i_data_sem);
-}
-
 struct ext4_group_info {
 	unsigned long   bb_state;
 	struct rb_root  bb_free_root;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8ccbe9a..4fafd09 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2242,13 +2242,23 @@ static int mpage_map_and_submit_extent(handle_t *handle,
 			return err;
 	} while (map->m_len);
 
-	/* Update on-disk size after IO is submitted */
+	/*
+	 * Update on-disk size after IO is submitted.  Races with
+	 * truncate are avoided by checking i_size under i_data_sem.
+	 */
 	disksize = ((loff_t)mpd->first_page) << PAGE_CACHE_SHIFT;
 	if (disksize > EXT4_I(inode)->i_disksize) {
 		int err2;
-
-		ext4_wb_update_i_disksize(inode, disksize);
+		loff_t i_size;
+
+		down_write(&EXT4_I(inode)->i_data_sem);
+		i_size = i_size_read(inode);
+		if (disksize > i_size)
+			disksize = i_size;
+		if (disksize > EXT4_I(inode)->i_disksize)
+			EXT4_I(inode)->i_disksize = disksize;
 		err2 = ext4_mark_inode_dirty(handle, inode);
+		up_write(&EXT4_I(inode)->i_data_sem);
 		if (err2)
 			ext4_error(inode->i_sb,
 				   "Failed to mark inode %lu dirty",
-- 
1.9.1

[PATCH 3.13 062/160] ext4: use i_size_read in ext4_unaligned_aio()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 6e6358fc3c3c862bfe9a5bc029d3f8ce43dc9765 upstream.

We haven't taken i_mutex yet, so we need to use i_size_read().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/ext4/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 3da2194..1b89010 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -82,7 +82,7 @@ ext4_unaligned_aio(struct inode *inode, const struct iovec *iov,
 	size_t count = iov_length(iov, nr_segs);
 	loff_t final_size = pos + count;
 
-	if (pos >= inode->i_size)
+	if (pos >= i_size_read(inode))
 		return 0;
 
 	if ((pos & blockmask) || (final_size & blockmask))
-- 
1.9.1

[PATCH 3.13 063/160] locks: allow __break_lease to sleep even when break_time is 0

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit f1c6bb2cb8b81013e8979806f8e15e3d53efb96d upstream.

A fl->fl_break_time of 0 has a special meaning to the lease break code
that basically means "never break the lease". knfsd uses this to ensure
that leases don't disappear out from under it.

Unfortunately, the code in __break_lease can end up passing this value
to wait_event_interruptible as a timeout, which prevents it from going
to sleep at all. This makes __break_lease to spin in a tight loop and
causes soft lockups.

Fix this by ensuring that we pass a minimum value of 1 as a timeout
instead.

Cc: J. Bruce Fields <bfields@fieldses.org>
Reported-by: Terry Barnaby <terry1@beam.ltd.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/locks.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/locks.c b/fs/locks.c
index 92a0f0a..4dd39b9 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1376,11 +1376,10 @@ int __break_lease(struct inode *inode, unsigned int mode, unsigned int type)
 
 restart:
 	break_time = flock->fl_break_time;
-	if (break_time != 0) {
+	if (break_time != 0)
 		break_time -= jiffies;
-		if (break_time == 0)
-			break_time++;
-	}
+	if (break_time == 0)
+		break_time++;
 	locks_insert_block(flock, new_fl);
 	spin_unlock(&inode->i_lock);
 	error = wait_event_interruptible_timeout(new_fl->fl_wait,
-- 
1.9.1

[PATCH 3.13 064/160] usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>

commit 9c1b70361e0b38e4acb8e62b54da66538cb77ff2 upstream.

It was impossible to enumerate on a SuperSpeed (XHCI) host
with alternate setting = 1 due to the wrongly set 'bMaxBurst'
field in the SuperSpeed Endpoint Companion descriptor.

Testcase:
<host> modprobe -r usbtest; modprobe usbtest alt=1
<device> modprobe g_zero
plug device to SuperSpeed port on the host.

Without this patch the host always complains like so
"usb 12-2: Not enough bandwidth for new device state.
 usb 12-2: Not enough bandwidth for altsetting 1"

Bug was introduced by commit cf9a08ae in v3.9

Fixes: cf9a08ae5aec (usb: gadget: convert source sink and loopback to
new function interface)

Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/gadget/zero.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index f49b0b6..10c048e 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -300,7 +300,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	ss_opts->isoc_interval = gzero_options.isoc_interval;
 	ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
 	ss_opts->isoc_mult = gzero_options.isoc_mult;
-	ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket;
+	ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
 	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
 
 	func_ss = usb_get_function(func_inst_ss);
-- 
1.9.1

[PATCH 3.13 065/160] ahci: do not request irq for dummy port

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Milburn <dmilburn@redhat.com>

commit 9ae794ac5e407d3bc3fec785db481d5a2c0fa275 upstream.

System may crash in ahci_hw_interrupt() or ahci_thread_fn() when
accessing the interrupt status in a port's private_data if the port is
actually a DUMMY port.

00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller

<snip console output for linux-3.15-rc1>
[    9.352080] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[    9.352084] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[    9.368155] Console: switching to colour frame buffer device 128x48
[    9.439759] mgag200 0000:11:00.0: fb0: mgadrmfb frame buffer device
[    9.446765] mgag200 0000:11:00.0: registered panic notifier
[    9.470166] scsi1 : ahci
[    9.479166] scsi2 : ahci
[    9.488172] scsi3 : ahci
[    9.497174] scsi4 : ahci
[    9.506175] scsi5 : ahci
[    9.515174] scsi6 : ahci
[    9.518181] ata1: SATA max UDMA/133 abar m2048@0x95c00000 port 0x95c00100 irq 91
[    9.526448] ata2: DUMMY
[    9.529182] ata3: DUMMY
[    9.531916] ata4: DUMMY
[    9.534650] ata5: DUMMY
[    9.537382] ata6: DUMMY
[    9.576196] [drm] Initialized mgag200 1.0.0 20110418 for 0000:11:00.0 on minor 0
[    9.845257] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    9.865161] ata1.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100
[    9.891407] ata1.00: configured for UDMA/100
[    9.900525] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7580S  FX04 PQ: 0 ANSI: 5
[   10.247399] iTCO_vendor_support: vendor-support=0
[   10.261572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.269764] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   10.301932] sd 0:2:0:0: [sda] 570310656 512-byte logical blocks: (291 GB/271 GiB)
[   10.317085] sd 0:2:0:0: [sda] Write Protect is off
[   10.328326] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
[   10.375452] BUG: unable to handle kernel NULL pointer dereference at 000000000000003c
[   10.384217] IP: [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci]
[   10.392101] PGD 0
[   10.394353] Oops: 0000 [#1] SMP
[   10.397978] Modules linked in: sr_mod(+) cdrom sd_mod iTCO_wdt crc_t10dif iTCO_vendor_support crct10dif_common ahci libahci libata lpc_ich mfd_core mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm i2c_core megaraid_sas dm_mirror dm_region_hash
dm_log dm_mod
[   10.426499] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1 #1
[   10.433495] Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011
[   10.443886] task: ffffffff81906460 ti: ffffffff818f0000 task.ti: ffffffff818f0000
[   10.452239] RIP: 0010:[<ffffffffa0133df0>]  [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci]
[   10.462838] RSP: 0018:ffff880033c03d98  EFLAGS: 00010046
[   10.468767] RAX: 0000000000a400a4 RBX: ffff880029a6bc18 RCX: 00000000fffffffa
[   10.476731] RDX: 00000000000000a4 RSI: ffff880029bb0000 RDI: ffff880029a6bc18
[   10.484696] RBP: ffff880033c03dc8 R08: 0000000000000000 R09: ffff88002f800490
[   10.492661] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000000
[   10.500625] R13: ffff880029a6bd98 R14: 0000000000000000 R15: ffffc90000194000
[   10.508590] FS:  0000000000000000(0000) GS:ffff880033c00000(0000) knlGS:0000000000000000
[   10.517623] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   10.524035] CR2: 000000000000003c CR3: 00000000328ff000 CR4: 00000000000007b0
[   10.531999] Stack:
[   10.534241]  0000000000000017 ffff880031ba7d00 000000000000005c ffff880031ba7d00
[   10.542535]  0000000000000000 000000000000005c ffff880033c03e10 ffffffff810c2a1e
[   10.550827]  ffff880031ae2900 000000008108fb4f ffff880031ae2900 ffff880031ae2984
[   10.559121] Call Trace:
[   10.561849]  <IRQ>
[   10.563994]  [<ffffffff810c2a1e>] handle_irq_event_percpu+0x3e/0x1a0
[   10.571309]  [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60
[   10.577631]  [<ffffffff810c4fdd>] try_one_irq.isra.6+0x8d/0xf0
[   10.584142]  [<ffffffff810c5313>] note_interrupt+0x173/0x1f0
[   10.590460]  [<ffffffff810c2a8e>] handle_irq_event_percpu+0xae/0x1a0
[   10.597554]  [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60
[   10.603872]  [<ffffffff810c5727>] handle_edge_irq+0x77/0x130
[   10.610199]  [<ffffffff81014b8f>] handle_irq+0xbf/0x150
[   10.616040]  [<ffffffff8109ff4e>] ? vtime_account_idle+0xe/0x50
[   10.622654]  [<ffffffff815fca1a>] ? atomic_notifier_call_chain+0x1a/0x20
[   10.630140]  [<ffffffff816038cf>] do_IRQ+0x4f/0xf0
[   10.635490]  [<ffffffff815f8aed>] common_interrupt+0x6d/0x6d
[   10.641805]  <EOI>
[   10.643950]  [<ffffffff8149ca9f>] ? cpuidle_enter_state+0x4f/0xc0
[   10.650972]  [<ffffffff8149ca98>] ? cpuidle_enter_state+0x48/0xc0
[   10.657775]  [<ffffffff8149cb47>] cpuidle_enter+0x17/0x20
[   10.663807]  [<ffffffff810b0070>] cpu_startup_entry+0x2c0/0x3d0
[   10.670423]  [<ffffffff815dfcc7>] rest_init+0x77/0x80
[   10.676065]  [<ffffffff81a60f47>] start_kernel+0x40f/0x41a
[   10.682190]  [<ffffffff81a60941>] ? repair_env_string+0x5c/0x5c
[   10.688799]  [<ffffffff81a60120>] ? early_idt_handlers+0x120/0x120
[   10.695699]  [<ffffffff81a605ee>] x86_64_start_reservations+0x2a/0x2c
[   10.702889]  [<ffffffff81a60733>] x86_64_start_kernel+0x143/0x152
[   10.709689] Code: a0 fc ff 85 c0 8b 4d d4 74 c3 48 8b 7b 08 89 ca 48 c7 c6 60 66 13 a0 31 c0 e8 9d 70 28 e1 8b 4d d4 eb aa 0f 1f 84 00 00 00 00 00 <45> 8b 64 24 3c 48 89 df e8 23 47 4c e1 41 83 fc 01 19 c0 48 83
[   10.731470] RIP  [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci]
[   10.739441]  RSP <ffff880033c03d98>
[   10.743333] CR2: 000000000000003c
[   10.747032] ---[ end trace b6e82636970e2690 ]---
[   10.760190] Kernel panic - not syncing: Fatal exception in interrupt
[   10.767291] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)

Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-of-by: David Milburn <dmilburn@redhat.com>
Fixes: 5ca72c4f7c41 ("AHCI: Support multiple MSIs")
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/ata/ahci.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 2ecf42f..337d126 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1169,18 +1169,14 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis)
 		return rc;
 
 	for (i = 0; i < host->n_ports; i++) {
-		const char* desc;
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
 
 		/* pp is NULL for dummy ports */
 		if (pp)
-			desc = pp->irq_desc;
-		else
-			desc = dev_driver_string(host->dev);
-
-		rc = devm_request_threaded_irq(host->dev,
-			irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED,
-			desc, host->ports[i]);
+			rc = devm_request_threaded_irq(host->dev,
+						       irq + i, ahci_hw_interrupt,
+						       ahci_thread_fn, IRQF_SHARED,
+						       pp->irq_desc, host->ports[i]);
 		if (rc)
 			goto out_free_irqs;
 	}
-- 
1.9.1

[PATCH 3.13 066/160] genirq: Allow forcing cpu affinity of interrupts

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 01f8fa4f01d8362358eb90e412bd7ae18a3ec1ad upstream.

The current implementation of irq_set_affinity() refuses rightfully to
route an interrupt to an offline cpu.

But there is a special case, where this is actually desired. Some of
the ARM SoCs have per cpu timers which require setting the affinity
during cpu startup where the cpu is not yet in the online mask.

If we can't do that, then the local timer interrupt for the about to
become online cpu is routed to some random online cpu.

The developers of the affected machines tried to work around that
issue, but that results in a massive mess in that timer code.

We have a yet unused argument in the set_affinity callbacks of the irq
chips, which I added back then for a similar reason. It was never
required so it got not used. But I'm happy that I never removed it.

That allows us to implement a sane handling of the above scenario. So
the affected SoC drivers can add the required force handling to their
interrupt chip, switch the timer code to irq_force_affinity() and
things just work.

This does not affect any existing user of irq_set_affinity().

Tagged for stable to allow a simple fix of the affected SoC clock
event drivers.

Reported-and-tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>,
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/mips/cavium-octeon/octeon-irq.c |  2 +-
 include/linux/interrupt.h            | 35 ++++++++++++++++++++++++++++++++++-
 include/linux/irq.h                  |  3 ++-
 kernel/irq/manage.c                  | 17 ++++++-----------
 4 files changed, 43 insertions(+), 14 deletions(-)

diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 25fbfae..ab7dc01 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -635,7 +635,7 @@ static void octeon_irq_cpu_offline_ciu(struct irq_data *data)
 		cpumask_clear(&new_affinity);
 		cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity);
 	}
-	__irq_set_affinity_locked(data, &new_affinity);
+	irq_set_affinity_locked(data, &new_affinity, false);
 }
 
 static int octeon_irq_ciu_set_affinity(struct irq_data *data,
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index db43b58..c88e76c 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -197,7 +197,40 @@ static inline int check_wakeup_irqs(void) { return 0; }
 
 extern cpumask_var_t irq_default_affinity;
 
-extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+/* Internal implementation. Use the helpers below */
+extern int __irq_set_affinity(unsigned int irq, const struct cpumask *cpumask,
+			      bool force);
+
+/**
+ * irq_set_affinity - Set the irq affinity of a given irq
+ * @irq:	Interrupt to set affinity
+ * @mask:	cpumask
+ *
+ * Fails if cpumask does not contain an online CPU
+ */
+static inline int
+irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+{
+	return __irq_set_affinity(irq, cpumask, false);
+}
+
+/**
+ * irq_force_affinity - Force the irq affinity of a given irq
+ * @irq:	Interrupt to set affinity
+ * @mask:	cpumask
+ *
+ * Same as irq_set_affinity, but without checking the mask against
+ * online cpus.
+ *
+ * Solely for low level cpu hotplug code, where we need to make per
+ * cpu interrupts affine before the cpu becomes online.
+ */
+static inline int
+irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
+{
+	return __irq_set_affinity(irq, cpumask, true);
+}
+
 extern int irq_can_set_affinity(unsigned int irq);
 extern int irq_select_affinity(unsigned int irq);
 
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 7dc1003..ef1ac9f 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -385,7 +385,8 @@ extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
 
 extern void irq_cpu_online(void);
 extern void irq_cpu_offline(void);
-extern int __irq_set_affinity_locked(struct irq_data *data,  const struct cpumask *cpumask);
+extern int irq_set_affinity_locked(struct irq_data *data,
+				   const struct cpumask *cpumask, bool force);
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
 void irq_move_irq(struct irq_data *data);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index d3bf660..66a1b46 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -150,7 +150,7 @@ int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	struct irq_chip *chip = irq_data_get_irq_chip(data);
 	int ret;
 
-	ret = chip->irq_set_affinity(data, mask, false);
+	ret = chip->irq_set_affinity(data, mask, force);
 	switch (ret) {
 	case IRQ_SET_MASK_OK:
 		cpumask_copy(data->affinity, mask);
@@ -162,7 +162,8 @@ int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	return ret;
 }
 
-int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask)
+int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
+			    bool force)
 {
 	struct irq_chip *chip = irq_data_get_irq_chip(data);
 	struct irq_desc *desc = irq_data_to_desc(data);
@@ -172,7 +173,7 @@ int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask)
 		return -EINVAL;
 
 	if (irq_can_move_pcntxt(data)) {
-		ret = irq_do_set_affinity(data, mask, false);
+		ret = irq_do_set_affinity(data, mask, force);
 	} else {
 		irqd_set_move_pending(data);
 		irq_copy_pending(desc, mask);
@@ -187,13 +188,7 @@ int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask)
 	return ret;
 }
 
-/**
- *	irq_set_affinity - Set the irq affinity of a given irq
- *	@irq:		Interrupt to set affinity
- *	@mask:		cpumask
- *
- */
-int irq_set_affinity(unsigned int irq, const struct cpumask *mask)
+int __irq_set_affinity(unsigned int irq, const struct cpumask *mask, bool force)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long flags;
@@ -203,7 +198,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *mask)
 		return -EINVAL;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-	ret =  __irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask);
+	ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
 	return ret;
 }
-- 
1.9.1

[PATCH 3.13 067/160] irqchip: Gic: Support forced affinity setting

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit ffde1de64012c406dfdda8690918248b472f24e4 upstream.

To support the affinity setting of per cpu timers in the early startup
of a not yet online cpu, implement the force logic, which disables the
cpu online check.

Tagged for stable to allow a simple fix of the affected SoC clock
event drivers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>,
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143315.916984416@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/irqchip/irq-gic.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 341c601..ac2d41b 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -246,10 +246,14 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 			    bool force)
 {
 	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
-	unsigned int shift = (gic_irq(d) % 4) * 8;
-	unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
+	unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
 	u32 val, mask, bit;
 
+	if (!force)
+		cpu = cpumask_any_and(mask_val, cpu_online_mask);
+	else
+		cpu = cpumask_first(mask_val);
+
 	if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
 		return -EINVAL;
 
-- 
1.9.1

[PATCH 3.13 068/160] clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 30ccf03b4a6a2102a2219058bdc6d779dc637dd7 upstream.

The starting cpu is not yet in the online mask so irq_set_affinity()
fails which results in per cpu timers for this cpu ending up on some
other online cpu, ususally cpu 0.

Use irq_force_affinity() which disables the online mask check and
makes things work.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>,
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143316.106665251@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/clocksource/exynos_mct.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 62b0de6..b17b3e0 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -428,6 +428,7 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
 				evt->irq);
 			return -EIO;
 		}
+		irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu));
 	} else {
 		enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
 	}
@@ -448,7 +449,6 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self,
 					   unsigned long action, void *hcpu)
 {
 	struct mct_clock_event_device *mevt;
-	unsigned int cpu;
 
 	/*
 	 * Grab cpu pointer in each case to avoid spurious
@@ -459,12 +459,6 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self,
 		mevt = this_cpu_ptr(&percpu_mct_tick);
 		exynos4_local_timer_setup(&mevt->evt);
 		break;
-	case CPU_ONLINE:
-		cpu = (unsigned long)hcpu;
-		if (mct_int_type == MCT_INT_SPI)
-			irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu],
-						cpumask_of(cpu));
-		break;
 	case CPU_DYING:
 		mevt = this_cpu_ptr(&percpu_mct_tick);
 		exynos4_local_timer_stop(&mevt->evt);
-- 
1.9.1

[PATCH 3.13 069/160] clocksource: Exynos_mct: Register clock event after request_irq()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit 8db6e5104b77de5d0b7002b95069da0992a34be9 upstream.

After hotplugging CPU1 the first call of interrupt handler for CPU1
oneshot timer was called on CPU0 because it fired before setting IRQ
affinity. Affected are SoCs where Multi Core Timer interrupts are
shared (SPI), e.g. Exynos 4210.

During setup of the MCT timers the clock event device should be
registered after setting the affinity for interrupt. This will prevent
starting the timer too early.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>,
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143316.299247848@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/clocksource/exynos_mct.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index b17b3e0..70f3a59 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -414,8 +414,6 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
 	evt->set_mode = exynos4_tick_set_mode;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 450;
-	clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
-					0xf, 0x7fffffff);
 
 	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
@@ -432,6 +430,8 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
 	} else {
 		enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
 	}
+	clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+					0xf, 0x7fffffff);
 
 	return 0;
 }
-- 
1.9.1

[PATCH 3.13 070/160] nfsd: set timeparms.to_maxval in setup_callback_client

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit 3758cf7e14b753838fe754ede3862af10b35fdac upstream.

...otherwise the logic in the timeout handling doesn't work correctly.

Spotted-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/nfsd/nfs4callback.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 7f05cd1..3eaa6e3 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -637,9 +637,11 @@ static struct rpc_cred *get_backchannel_cred(struct nfs4_client *clp, struct rpc
 
 static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *conn, struct nfsd4_session *ses)
 {
+	int maxtime = max_cb_time(clp->net);
 	struct rpc_timeout	timeparms = {
-		.to_initval	= max_cb_time(clp->net),
+		.to_initval	= maxtime,
 		.to_retries	= 0,
+		.to_maxval	= maxtime,
 	};
 	struct rpc_create_args args = {
 		.net		= clp->net,
-- 
1.9.1

[PATCH 3.13 071/160] ahci: Do not receive interrupts sent by dummy ports

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Gordeev <agordeev@redhat.com>

commit 2cf532f5e67c0cfe38c8c100e49280cdadacd2be upstream.

In multiple MSI mode all AHCI ports (including dummy) get assigned
separate MSI vectors and (as result of execution
pci_enable_msi_exact() function) separate IRQ numbers, (mapped to the
MSI vectors).

Therefore, although interrupts from dummy ports are not desired they
are still enabled. We do not request IRQs for dummy ports, but that
only means we do not assign AHCI-specific ISRs to corresponding IRQ
numbers.

As result, dummy port interrupts still could come and traverse all the
way from the PCI device to the kernel, causing unnecessary overhead.

This update disables IRQs for dummy ports and prevents the described
issue.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: David Milburn <dmilburn@redhat.com>
Cc: linux-ide@vger.kernel.org
Fixes: 5ca72c4f7c41 ("AHCI: Support multiple MSIs")
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/ata/ahci.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 337d126..bc5579e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1171,12 +1171,16 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis)
 	for (i = 0; i < host->n_ports; i++) {
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
 
-		/* pp is NULL for dummy ports */
-		if (pp)
-			rc = devm_request_threaded_irq(host->dev,
-						       irq + i, ahci_hw_interrupt,
-						       ahci_thread_fn, IRQF_SHARED,
-						       pp->irq_desc, host->ports[i]);
+		/* Do not receive interrupts sent by dummy ports */
+		if (!pp) {
+			disable_irq(irq + i);
+			continue;
+		}
+
+		rc = devm_request_threaded_irq(host->dev, irq + i,
+					       ahci_hw_interrupt,
+					       ahci_thread_fn, IRQF_SHARED,
+					       pp->irq_desc, host->ports[i]);
 		if (rc)
 			goto out_free_irqs;
 	}
-- 
1.9.1

[PATCH 3.13 072/160] libata/ahci: accommodate tag ordered controllers

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 8a4aeec8d2d6a3edeffbdfae451cdf05cbf0fefd upstream.

The AHCI spec allows implementations to issue commands in tag order
rather than FIFO order:

	5.3.2.12 P:SelectCmd
	HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1)
	or HBA selects the command to issue that has had the
	PxCI bit set to '1' longer than any other command
	pending to be issued.

The result is that commands posted sequentially (time-wise) may play out
of sequence when issued by hardware.

This behavior has likely been hidden by drives that arrange for commands
to complete in issue order.  However, it appears recent drives (two from
different vendors that we have found so far) inflict out-of-order
completions as a matter of course.  So, we need to take care to maintain
ordered submission, otherwise we risk triggering a drive to fall out of
sequential-io automation and back to random-io processing, which incurs
large latency and degrades throughput.

This issue was found in simple benchmarks where QD=2 seq-write
performance was 30-50% *greater* than QD=32 seq-write performance.

Tagging for -stable and making the change globally since it has a low
risk-to-reward ratio.  Also, word is that recent versions of an unnamed
OS also does it this way now.  So, drives in the field are already
experienced with this tag ordering scheme.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ed Ciechanowski <ed.ciechanowski@intel.com>
Reviewed-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/ata/libata-core.c | 21 +++++++++++++--------
 include/linux/libata.h    |  1 +
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2897dbe..0a79c54 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4794,21 +4794,26 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc = NULL;
-	unsigned int i;
+	unsigned int i, tag;
 
 	/* no command while frozen */
 	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
 		return NULL;
 
-	/* the last tag is reserved for internal command. */
-	for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
-		if (!test_and_set_bit(i, &ap->qc_allocated)) {
-			qc = __ata_qc_from_tag(ap, i);
+	for (i = 0; i < ATA_MAX_QUEUE; i++) {
+		tag = (i + ap->last_tag + 1) % ATA_MAX_QUEUE;
+
+		/* the last tag is reserved for internal command. */
+		if (tag == ATA_TAG_INTERNAL)
+			continue;
+
+		if (!test_and_set_bit(tag, &ap->qc_allocated)) {
+			qc = __ata_qc_from_tag(ap, tag);
+			qc->tag = tag;
+			ap->last_tag = tag;
 			break;
 		}
-
-	if (qc)
-		qc->tag = i;
+	}
 
 	return qc;
 }
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bec6dbe..3fee55e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -822,6 +822,7 @@ struct ata_port {
 	unsigned long		qc_allocated;
 	unsigned int		qc_active;
 	int			nr_active_links; /* #links with active qcs */
+	unsigned int		last_tag;	/* track next tag hw expects */
 
 	struct ata_link		link;		/* host default link */
 	struct ata_link		*slave_link;	/* see ata_slave_link_init() */
-- 
1.9.1

[PATCH 3.13 073/160] drm/radeon: disable dpm on rv770 by default

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 76e6dcece841faebbee78895780e8209ff40d922 upstream.

There seem to be stability issues on a number of cards.

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=76286
https://bugzilla.redhat.com/show_bug.cgi?id=1085785
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741619

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: matthias.graf@st.ovqu.de
Cc: bp@alien8.de
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_pm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 524b091..d7e631b 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1230,6 +1230,7 @@ int radeon_pm_init(struct radeon_device *rdev)
 	case CHIP_RV670:
 	case CHIP_RS780:
 	case CHIP_RS880:
+	case CHIP_RV770:
 	case CHIP_BARTS:
 	case CHIP_TURKS:
 	case CHIP_CAICOS:
@@ -1250,7 +1251,6 @@ int radeon_pm_init(struct radeon_device *rdev)
 		else
 			rdev->pm.pm_method = PM_METHOD_PROFILE;
 		break;
-	case CHIP_RV770:
 	case CHIP_RV730:
 	case CHIP_RV710:
 	case CHIP_RV740:
-- 
1.9.1

[PATCH 3.13 074/160] Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 46a2986ebbe18757c2d8c352f8fb6e0f4f0754e3 upstream.

We expect that all the Haswell series will need such quirks, sigh.

The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad,
with the same min/max issue.

The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation.

The X1 and T431s share a PnPID with the T540p, but the reported ranges are
closer to those of the T440s.

HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me,
S1 Yoga and X1 are written by Benjamin Tissoires.

Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the
X240, X1 uses the same touchpad as the T440.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/input/mouse/synaptics.c | 42 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index d8d49d1..5048210 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1515,6 +1515,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = {
 		.driver_data = (int []){1232, 5710, 1156, 4696},
 	},
 	{
+		/* Lenovo ThinkPad T431s */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T431"),
+		},
+		.driver_data = (int []){1024, 5112, 2024, 4832},
+	},
+	{
 		/* Lenovo ThinkPad T440s */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -1523,6 +1531,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = {
 		.driver_data = (int []){1024, 5112, 2024, 4832},
 	},
 	{
+		/* Lenovo ThinkPad L440 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L440"),
+		},
+		.driver_data = (int []){1024, 5112, 2024, 4832},
+	},
+	{
 		/* Lenovo ThinkPad T540p */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -1530,6 +1546,32 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = {
 		},
 		.driver_data = (int []){1024, 5056, 2058, 4832},
 	},
+	{
+		/* Lenovo ThinkPad L540 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L540"),
+		},
+		.driver_data = (int []){1024, 5112, 2024, 4832},
+	},
+	{
+		/* Lenovo Yoga S1 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION,
+					"ThinkPad S1 Yoga"),
+		},
+		.driver_data = (int []){1232, 5710, 1156, 4696},
+	},
+	{
+		/* Lenovo ThinkPad X1 Carbon Haswell (3rd generation) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION,
+					"ThinkPad X1 Carbon 2nd"),
+		},
+		.driver_data = (int []){1024, 5112, 2024, 4832},
+	},
 #endif
 	{ }
 };
-- 
1.9.1

[PATCH 3.13 075/160] drm/radeon: fix count in cik_sdma_ring_test()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 7e95cfb0b797678cd3493ca0322ef2675547a0bc upstream.

Should be 5 rather than 4.

Noticed-by: Mathias Fröhlich <Mathias.Froehlich@gmx.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/cik_sdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c
index 2e0c7a8..d528dcf 100644
--- a/drivers/gpu/drm/radeon/cik_sdma.c
+++ b/drivers/gpu/drm/radeon/cik_sdma.c
@@ -526,7 +526,7 @@ int cik_sdma_ring_test(struct radeon_device *rdev,
 	tmp = 0xCAFEDEAD;
 	writel(tmp, ptr);
 
-	r = radeon_ring_lock(rdev, ring, 4);
+	r = radeon_ring_lock(rdev, ring, 5);
 	if (r) {
 		DRM_ERROR("radeon: dma failed to lock ring %d (%d).\n", ring->idx, r);
 		return r;
-- 
1.9.1

[PATCH 3.13 076/160] drm/radeon: properly unregister hwmon interface (v2)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit cb3e4e7c59e4b43ac378631f6101f5c8de3a27a5 upstream.

Need to properly unregister the hwmon device on driver
unload.

v2: minor clean up

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73931

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_pm.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index d7e631b..5ca7072 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -603,7 +603,6 @@ static const struct attribute_group *hwmon_groups[] = {
 static int radeon_hwmon_init(struct radeon_device *rdev)
 {
 	int err = 0;
-	struct device *hwmon_dev;
 
 	switch (rdev->pm.int_thermal_type) {
 	case THERMAL_TYPE_RV6XX:
@@ -616,11 +615,11 @@ static int radeon_hwmon_init(struct radeon_device *rdev)
 	case THERMAL_TYPE_KV:
 		if (rdev->asic->pm.get_temperature == NULL)
 			return err;
-		hwmon_dev = hwmon_device_register_with_groups(rdev->dev,
-							      "radeon", rdev,
-							      hwmon_groups);
-		if (IS_ERR(hwmon_dev)) {
-			err = PTR_ERR(hwmon_dev);
+		rdev->pm.int_hwmon_dev = hwmon_device_register_with_groups(rdev->dev,
+									   "radeon", rdev,
+									   hwmon_groups);
+		if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+			err = PTR_ERR(rdev->pm.int_hwmon_dev);
 			dev_err(rdev->dev,
 				"Unable to register hwmon device: %d\n", err);
 		}
@@ -632,6 +631,12 @@ static int radeon_hwmon_init(struct radeon_device *rdev)
 	return err;
 }
 
+static void radeon_hwmon_fini(struct radeon_device *rdev)
+{
+	if (rdev->pm.int_hwmon_dev)
+		hwmon_device_unregister(rdev->pm.int_hwmon_dev);
+}
+
 static void radeon_dpm_thermal_work_handler(struct work_struct *work)
 {
 	struct radeon_device *rdev =
@@ -1314,6 +1319,8 @@ static void radeon_pm_fini_old(struct radeon_device *rdev)
 		device_remove_file(rdev->dev, &dev_attr_power_method);
 	}
 
+	radeon_hwmon_fini(rdev);
+
 	if (rdev->pm.power_state)
 		kfree(rdev->pm.power_state);
 }
@@ -1333,6 +1340,8 @@ static void radeon_pm_fini_dpm(struct radeon_device *rdev)
 	}
 	radeon_dpm_fini(rdev);
 
+	radeon_hwmon_fini(rdev);
+
 	if (rdev->pm.power_state)
 		kfree(rdev->pm.power_state);
 }
-- 
1.9.1

[PATCH 3.13 077/160] drm/radeon/pm: don't walk the crtc list before it has been initialized (v2)

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 3ed9a335cfc64b2c83545f341cdddf2347b12b97 upstream.

Avoids a crash in certain cases when thermal irqs are generated
before the display structures have been initialized.

v2: fix the vblank and vrefresh helpers as well

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73931

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/r600_dpm.c  | 35 +++++++++++++++++++----------------
 drivers/gpu/drm/radeon/radeon_pm.c | 28 ++++++++++++++++------------
 2 files changed, 35 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c
index 5513d8f..2df683a 100644
--- a/drivers/gpu/drm/radeon/r600_dpm.c
+++ b/drivers/gpu/drm/radeon/r600_dpm.c
@@ -158,16 +158,18 @@ u32 r600_dpm_get_vblank_time(struct radeon_device *rdev)
 	u32 line_time_us, vblank_lines;
 	u32 vblank_time_us = 0xffffffff; /* if the displays are off, vblank time is max */
 
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		radeon_crtc = to_radeon_crtc(crtc);
-		if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
-			line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) /
-				radeon_crtc->hw_mode.clock;
-			vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end -
-				radeon_crtc->hw_mode.crtc_vdisplay +
-				(radeon_crtc->v_border * 2);
-			vblank_time_us = vblank_lines * line_time_us;
-			break;
+	if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+			radeon_crtc = to_radeon_crtc(crtc);
+			if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
+				line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) /
+					radeon_crtc->hw_mode.clock;
+				vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end -
+					radeon_crtc->hw_mode.crtc_vdisplay +
+					(radeon_crtc->v_border * 2);
+				vblank_time_us = vblank_lines * line_time_us;
+				break;
+			}
 		}
 	}
 
@@ -181,14 +183,15 @@ u32 r600_dpm_get_vrefresh(struct radeon_device *rdev)
 	struct radeon_crtc *radeon_crtc;
 	u32 vrefresh = 0;
 
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		radeon_crtc = to_radeon_crtc(crtc);
-		if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
-			vrefresh = radeon_crtc->hw_mode.vrefresh;
-			break;
+	if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+			radeon_crtc = to_radeon_crtc(crtc);
+			if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
+				vrefresh = radeon_crtc->hw_mode.vrefresh;
+				break;
+			}
 		}
 	}
-
 	return vrefresh;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 5ca7072..58b0a80 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1367,12 +1367,14 @@ static void radeon_pm_compute_clocks_old(struct radeon_device *rdev)
 
 	rdev->pm.active_crtcs = 0;
 	rdev->pm.active_crtc_count = 0;
-	list_for_each_entry(crtc,
-		&ddev->mode_config.crtc_list, head) {
-		radeon_crtc = to_radeon_crtc(crtc);
-		if (radeon_crtc->enabled) {
-			rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id);
-			rdev->pm.active_crtc_count++;
+	if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+		list_for_each_entry(crtc,
+				    &ddev->mode_config.crtc_list, head) {
+			radeon_crtc = to_radeon_crtc(crtc);
+			if (radeon_crtc->enabled) {
+				rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id);
+				rdev->pm.active_crtc_count++;
+			}
 		}
 	}
 
@@ -1436,12 +1438,14 @@ static void radeon_pm_compute_clocks_dpm(struct radeon_device *rdev)
 	/* update active crtc counts */
 	rdev->pm.dpm.new_active_crtcs = 0;
 	rdev->pm.dpm.new_active_crtc_count = 0;
-	list_for_each_entry(crtc,
-		&ddev->mode_config.crtc_list, head) {
-		radeon_crtc = to_radeon_crtc(crtc);
-		if (crtc->enabled) {
-			rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
-			rdev->pm.dpm.new_active_crtc_count++;
+	if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+		list_for_each_entry(crtc,
+				    &ddev->mode_config.crtc_list, head) {
+			radeon_crtc = to_radeon_crtc(crtc);
+			if (crtc->enabled) {
+				rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
+				rdev->pm.dpm.new_active_crtc_count++;
+			}
 		}
 	}
 
-- 
1.9.1

[PATCH 3.13 078/160] drm/radeon: fix ATPX detection on non-VGA GPUs

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit e9a4099a59cc598a44006059dd775c25e422b772 upstream.

Some newer PX laptops have the pci device class
set to DISPLAY_OTHER rather than DISPLAY_VGA.  This
properly detects ATPX on those laptops.

Based on a patch from: Pali Rohár <pali.rohar@gmail.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: airlied@gmail.com
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_atpx_handler.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index dedea72..a9fb0d0 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -528,6 +528,13 @@ static bool radeon_atpx_detect(void)
 		has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true);
 	}
 
+	/* some newer PX laptops mark the dGPU as a non-VGA display device */
+	while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) {
+		vga_count++;
+
+		has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true);
+	}
+
 	if (has_atpx && vga_count == 2) {
 		acpi_get_name(radeon_atpx_priv.atpx.handle, ACPI_FULL_PATHNAME, &buffer);
 		printk(KERN_INFO "VGA switcheroo: detected switching method %s handle\n",
-- 
1.9.1

[PATCH 3.13 079/160] drm/radeon: don't allow runpm=1 on systems with out ATPX

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 73acacc7397fe854ed2ab75f1c940fa00faaf15e upstream.

vgaswitcheroo and the ATPX ACPI methods are required to
power down the dGPU.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73901

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_kms.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 9b2799c..e0315d2 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -107,11 +107,9 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 		flags |= RADEON_IS_PCI;
 	}
 
-	if (radeon_runtime_pm == 1)
-		flags |= RADEON_IS_PX;
-	else if ((radeon_runtime_pm == -1) &&
-		 radeon_has_atpx() &&
-		 ((flags & RADEON_IS_IGP) == 0))
+	if ((radeon_runtime_pm != 0) &&
+	    radeon_has_atpx() &&
+	    ((flags & RADEON_IS_IGP) == 0))
 		flags |= RADEON_IS_PX;
 
 	/* radeon_device_init should report only fatal error
-- 
1.9.1

[PATCH 3.13 080/160] mm: make fixup_user_fault() check the vma access rights too

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 1b17844b29ae042576bea588164f2f1e9590a8bc upstream.

fixup_user_fault() is used by the futex code when the direct user access
fails, and the futex code wants it to either map in the page in a usable
form or return an error.  It relied on handle_mm_fault() to map the
page, and correctly checked the error return from that, but while that
does map the page, it doesn't actually guarantee that the page will be
mapped with sufficient permissions to be then accessed.

So do the appropriate tests of the vma access rights by hand.

[ Side note: arguably handle_mm_fault() could just do that itself, but
  we have traditionally done it in the caller, because some callers -
  notably get_user_pages() - have been able to access pages even when
  they are mapped with PROT_NONE.  Maybe we should re-visit that design
  decision, but in the meantime this is the minimal patch. ]

Found by Dave Jones running his trinity tool.

Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/memory.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/mm/memory.c b/mm/memory.c
index 95257f5..d411f0d 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1928,12 +1928,17 @@ int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
 		     unsigned long address, unsigned int fault_flags)
 {
 	struct vm_area_struct *vma;
+	vm_flags_t vm_flags;
 	int ret;
 
 	vma = find_extend_vma(mm, address);
 	if (!vma || address < vma->vm_start)
 		return -EFAULT;
 
+	vm_flags = (fault_flags & FAULT_FLAG_WRITE) ? VM_WRITE : VM_READ;
+	if (!(vm_flags & vma->vm_flags))
+		return -EFAULT;
+
 	ret = handle_mm_fault(mm, vma, address, fault_flags);
 	if (ret & VM_FAULT_ERROR) {
 		if (ret & VM_FAULT_OOM)
-- 
1.9.1

[PATCH 3.13 081/160] ARM: 8027/1: fix do_div() bug in big-endian systems

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiangyu Lu <luxiangyu@huawei.com>

commit 80bb3ef109ff40a7593d9481c17de9bbc4d7c0e2 upstream.

In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result.

When viewing ftrace record in big-endian ARM systems, we found that
the timestamp errors:

swapper-0   [001] 1325.970000:   0:120:R ==> [001]    16:120:R events/1
events/1-16 [001] 1325.970000:   16:120:S ==> [001]    0:120:R swapper
swapper-0   [000] 1325.1000000:  0:120:R   + [000]    15:120:R events/0
swapper-0   [000] 1325.1000000:  0:120:R ==> [000]    15:120:R events/0
swapper-0   [000] 1326.030000:   0:120:R   + [000]  1150:120:R sshd
swapper-0   [000] 1326.030000:   0:120:R ==> [000]  1150:120:R sshd

When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2".

Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Alex Wu <wuquanming@huawei.com>
Signed-off-by: Xiangyu Lu <luxiangyu@huawei.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arm/include/asm/div64.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 191ada6..662c7bd 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -156,7 +156,7 @@
 		/* Select the best insn combination to perform the   */	\
 		/* actual __m * __n / (__p << 64) operation.         */	\
 		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
 				: "=&r" (__res)				\
 				: "r" (__m), "r" (__n)			\
-- 
1.9.1

[PATCH 3.13 082/160] ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Hua <sdu.liu@huawei.com>

commit 56b700fd6f1e49149880fb1b6ffee0dca5be45fb upstream.

For vmcore generated by LPAE enabled kernel, user space
utility such as crash needs additional infomation to
parse.

So this patch add arch_crash_save_vmcoreinfo as what PAE enabled
i386 linux does.

Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arm/kernel/machine_kexec.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index f0d180d..8cf0996 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image)
 
 	soft_restart(reboot_entry_phys);
 }
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_ARM_LPAE
+	VMCOREINFO_CONFIG(ARM_LPAE);
+#endif
+}
-- 
1.9.1

[PATCH 3.13 083/160] ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrea Adami <andrea.adami@gmail.com>

commit c02b50e90be9f41d6802049a1a08246e9eb1a22c upstream.

hx4700 needs the same fix as in
9705e74671f0e4f994d86b00cecf441917c64a66
"ARM: pxa: fix various compilation problems"

Fix build errors. Initial one is:
/linux/arch/arm/mach-pxa/include/mach/hx4700.h:18:32: error:
 'PXA_NR_BUILTIN_GPIO' undeclared here (not in a function)
|  #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arm/mach-pxa/include/mach/hx4700.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 8bc0291..0e1bb46 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -14,6 +14,7 @@
 
 #include <linux/gpio.h>
 #include <linux/mfd/asic3.h>
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
 
 #define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
-- 
1.9.1

[PATCH 3.13 084/160] ARM: tegra: remove UART5/UARTE from tegra124.dtsi

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Warren <swarren@nvidia.com>

commit 862f0eea38409ff0d7f226c1245b787e3f0e2607 upstream.

Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth
UART, but this appears to be left-over from earlier SoC documentation.
Remove the non-existent DT node for UART5.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ kamal: backport to 3.13-stable ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index b741300..96ee0da 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -87,14 +87,6 @@
 		status = "disabled";
 	};
 
-	serial@70006400 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
 	rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
-- 
1.9.1

[PATCH 3.13 085/160] USB: serial: fix sysfs-attribute removal deadlock

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 10164c2ad6d2c16809f6c09e278f946e47801b3a upstream.

Fix driver new_id sysfs-attribute removal deadlock by making sure to
not hold any locks that the attribute operations grab when removing the
attribute.

Specifically, usb_serial_deregister holds the table mutex when
deregistering the driver, which includes removing the new_id attribute.
This can lead to a deadlock as writing to new_id increments the
attribute's active count before trying to grab the same mutex in
usb_serial_probe.

The deadlock can easily be triggered by inserting a sleep in
usb_serial_deregister and writing the id of an unbound device to new_id
during module unload.

As the table mutex (in this case) is used to prevent subdriver unload
during probe, it should be sufficient to only hold the lock while
manipulating the usb-serial driver list during deregister. A racing
probe will then either fail to find a matching subdriver or fail to get
the corresponding module reference.

Since v3.15-rc1 this also triggers the following lockdep warning:

======================================================
[ INFO: possible circular locking dependency detected ]
3.15.0-rc2 #123 Tainted: G        W
-------------------------------------------------------
modprobe/190 is trying to acquire lock:
 (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94

but task is already holding lock:
 (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (table_lock){+.+.+.}:
       [<c0075f84>] __lock_acquire+0x1694/0x1ce4
       [<c0076de8>] lock_acquire+0xb4/0x154
       [<c03af3cc>] _raw_spin_lock+0x4c/0x5c
       [<c02bbc24>] usb_store_new_id+0x14c/0x1ac
       [<bf007eb4>] new_id_store+0x68/0x70 [usbserial]
       [<c025f568>] drv_attr_store+0x30/0x3c
       [<c01690e0>] sysfs_kf_write+0x5c/0x60
       [<c01682c0>] kernfs_fop_write+0xd4/0x194
       [<c010881c>] vfs_write+0xbc/0x198
       [<c0108e4c>] SyS_write+0x4c/0xa0
       [<c000f880>] ret_fast_syscall+0x0/0x48

-> #0 (s_active#4){++++.+}:
       [<c03a7a28>] print_circular_bug+0x68/0x2f8
       [<c0076218>] __lock_acquire+0x1928/0x1ce4
       [<c0076de8>] lock_acquire+0xb4/0x154
       [<c0166b70>] __kernfs_remove+0x254/0x310
       [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94
       [<c0169fb8>] remove_files.isra.1+0x48/0x84
       [<c016a2fc>] sysfs_remove_group+0x58/0xac
       [<c016a414>] sysfs_remove_groups+0x34/0x44
       [<c02623b8>] driver_remove_groups+0x1c/0x20
       [<c0260e9c>] bus_remove_driver+0x3c/0xe4
       [<c026235c>] driver_unregister+0x38/0x58
       [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial]
       [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial]
       [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial]
       [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra]
       [<c009d6cc>] SyS_delete_module+0x184/0x210
       [<c000f880>] ret_fast_syscall+0x0/0x48

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(table_lock);
                               lock(s_active#4);
                               lock(table_lock);
  lock(s_active#4);

 *** DEADLOCK ***

1 lock held by modprobe/190:
 #0:  (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial]

stack backtrace:
CPU: 0 PID: 190 Comm: modprobe Tainted: G        W     3.15.0-rc2 #123
[<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24)
[<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28)
[<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8)
[<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4)
[<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154)
[<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310)
[<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94)
[<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84)
[<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac)
[<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44)
[<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20)
[<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4)
[<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58)
[<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial])
[<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial])
[<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial])
[<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra])
[<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210)
[<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48)

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/usb-serial.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6091bd5..52260af 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1348,10 +1348,12 @@ static int usb_serial_register(struct usb_serial_driver *driver)
 static void usb_serial_deregister(struct usb_serial_driver *device)
 {
 	pr_info("USB Serial deregistering driver %s\n", device->description);
+
 	mutex_lock(&table_lock);
 	list_del(&device->driver_list);
-	usb_serial_bus_deregister(device);
 	mutex_unlock(&table_lock);
+
+	usb_serial_bus_deregister(device);
 }
 
 /**
-- 
1.9.1

[PATCH 3.13 086/160] 8250_core: Fix unwanted TX chars write

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loic Poulain <loic.poulain@intel.com>

commit b08c9c317e3f7764a91d522cd031639ba42b98cc upstream.

On transmit-hold-register empty, serial8250_tx_chars
should be called only if we don't use DMA.
DMA has its own tx cycle.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/tty/serial/8250/8250_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 61ecd70..922d5bc 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1520,7 +1520,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 			status = serial8250_rx_chars(up, status);
 	}
 	serial8250_modem_status(up);
-	if (status & UART_LSR_THRE)
+	if (!up->dma && (status & UART_LSR_THRE))
 		serial8250_tx_chars(up);
 
 	spin_unlock_irqrestore(&port->lock, flags);
-- 
1.9.1

[PATCH 3.13 087/160] serial: 8250: Fix thread unsafe __dma_tx_complete function

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loic Poulain <loic.poulain@intel.com>

commit f8fd1b0350d3a4581125f5eda6528f5a2c5f9183 upstream.

__dma_tx_complete is not protected against concurrent
call of serial8250_tx_dma. it can lead to circular tail
index corruption or parallel call of serial_tx_dma on the
same data portion.

This patch fixes this issue by holding the port lock.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/tty/serial/8250/8250_dma.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 7046769..ab9096d 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -20,12 +20,15 @@ static void __dma_tx_complete(void *param)
 	struct uart_8250_port	*p = param;
 	struct uart_8250_dma	*dma = p->dma;
 	struct circ_buf		*xmit = &p->port.state->xmit;
-
-	dma->tx_running = 0;
+	unsigned long	flags;
 
 	dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
 				UART_XMIT_SIZE, DMA_TO_DEVICE);
 
+	spin_lock_irqsave(&p->port.lock, flags);
+
+	dma->tx_running = 0;
+
 	xmit->tail += dma->tx_size;
 	xmit->tail &= UART_XMIT_SIZE - 1;
 	p->port.icount.tx += dma->tx_size;
@@ -35,6 +38,8 @@ static void __dma_tx_complete(void *param)
 
 	if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port))
 		serial8250_tx_dma(p);
+
+	spin_unlock_irqrestore(&p->port.lock, flags);
 }
 
 static void __dma_rx_complete(void *param)
-- 
1.9.1

[PATCH 3.13 088/160] Btrfs: fix inode caching vs tree log

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miao Xie <miaox@cn.fujitsu.com>

commit 1c70d8fb4dfa95bee491816b2a6767b5ca1080e7 upstream.

Currently, with inode cache enabled, we will reuse its inode id immediately
after unlinking file, we may hit something like following:

|->iput inode
|->return inode id into inode cache
|->create dir,fsync
|->power off

An easy way to reproduce this problem is:

mkfs.btrfs -f /dev/sdb
mount /dev/sdb /mnt -o inode_cache,commit=100
dd if=/dev/zero of=/mnt/data bs=1M count=10 oflag=sync
inode_id=`ls -i /mnt/data | awk '{print $1}'`
rm -f /mnt/data

i=1
while [ 1 ]
do
        mkdir /mnt/dir_$i
        test1=`stat /mnt/dir_$i | grep Inode: | awk '{print $4}'`
        if [ $test1 -eq $inode_id ]
        then
		dd if=/dev/zero of=/mnt/dir_$i/data bs=1M count=1 oflag=sync
		echo b > /proc/sysrq-trigger
	fi
	sleep 1
        i=$(($i+1))
done

mount /dev/sdb /mnt
umount /dev/sdb
btrfs check /dev/sdb

We fix this problem by adding unlinked inode's id into pinned tree,
and we can not reuse them until committing transaction.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
[ kamal: backport to 3.13: context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/btrfs/inode-map.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index ab485e5..bac4511 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -205,24 +205,14 @@ again:
 
 void btrfs_return_ino(struct btrfs_root *root, u64 objectid)
 {
-	struct btrfs_free_space_ctl *ctl = root->free_ino_ctl;
 	struct btrfs_free_space_ctl *pinned = root->free_ino_pinned;
 
 	if (!btrfs_test_opt(root, INODE_MAP_CACHE))
 		return;
-
 again:
 	if (root->cached == BTRFS_CACHE_FINISHED) {
-		__btrfs_add_free_space(ctl, objectid, 1);
+		__btrfs_add_free_space(pinned, objectid, 1);
 	} else {
-		/*
-		 * If we are in the process of caching free ino chunks,
-		 * to avoid adding the same inode number to the free_ino
-		 * tree twice due to cross transaction, we'll leave it
-		 * in the pinned tree until a transaction is committed
-		 * or the caching work is done.
-		 */
-
 		mutex_lock(&root->fs_commit_mutex);
 		spin_lock(&root->cache_lock);
 		if (root->cached == BTRFS_CACHE_FINISHED) {
@@ -234,11 +224,7 @@ again:
 
 		start_caching(root);
 
-		if (objectid <= root->cache_progress ||
-		    objectid >= root->highest_objectid)
-			__btrfs_add_free_space(ctl, objectid, 1);
-		else
-			__btrfs_add_free_space(pinned, objectid, 1);
+		__btrfs_add_free_space(pinned, objectid, 1);
 
 		mutex_unlock(&root->fs_commit_mutex);
 	}
-- 
1.9.1

[PATCH 3.13 089/160] xhci: For streams the css flag most be read from the stream-ctx on ep stop

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit c4bedb77ec4cb42f37cae4cbfddda8283161f7c8 upstream.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/host/xhci-ring.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e2f3f4..fb6df2c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -552,9 +552,9 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
+	struct xhci_virt_ep *ep = &dev->eps[ep_index];
 	struct xhci_ring *ep_ring;
 	struct xhci_generic_trb *trb;
-	struct xhci_ep_ctx *ep_ctx;
 	dma_addr_t addr;
 
 	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
@@ -579,8 +579,16 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Finding endpoint context");
-	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
-	state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+	/* 4.6.9 the css flag is written to the stream context for streams */
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		struct xhci_stream_ctx *ctx =
+			&ep->stream_info->stream_ctx_array[stream_id];
+		state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring);
+	} else {
+		struct xhci_ep_ctx *ep_ctx
+			= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+		state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+	}
 
 	state->new_deq_ptr = cur_td->last_trb;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-- 
1.9.1

[PATCH 3.13 090/160] usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julius Werner <jwerner@chromium.org>

commit 1f81b6d22a5980955b01e08cf27fb745dc9b686f upstream.

We have observed a rare cycle state desync bug after Set TR Dequeue
Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that
doesn't fetch new TRBs and thus an unresponsive USB device). It always
triggers when a previous Set TR Dequeue Pointer command has set the
pointer to the final Link TRB of a segment, and then another URB gets
enqueued and cancelled again before it can be completed. Further
investigation showed that the xHC had returned the Link TRB in the TRB
Pointer field of the Transfer Event (CC == Stopped -- Length Invalid),
but when xhci_find_new_dequeue_state() later accesses the Endpoint
Context's TR Dequeue Pointer field it is set to the first TRB of the
next segment.

The driver expects those two values to be the same in this situation,
and uses the cycle state of the latter together with the address of the
former. This should be fine according to the XHCI specification, since
the endpoint ring should be stopped when returning the Transfer Event
and thus should not advance over the Link TRB before it gets restarted.
However, real-world XHCI implementations apparently don't really care
that much about these details, so the driver should follow a more
defensive approach to try to work around HC spec violations.

This patch removes the stopped_trb variable that had been used to store
the TRB Pointer from the last Transfer Event of a stopped TRB. Instead,
xhci_find_new_dequeue_state() now relies only on the Endpoint Context,
requiring a small amount of additional processing to find the virtual
address corresponding to the TR Dequeue Pointer. Some other parts of the
function were slightly rearranged to better fit into this model.

This patch should be backported to kernels as old as 2.6.31 that contain
the commit ae636747146ea97efa18e04576acd3416e2514f5 "USB: xhci: URB
cancellation support."

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/host/xhci-ring.c | 67 ++++++++++++++++++++------------------------
 drivers/usb/host/xhci.c      |  1 -
 drivers/usb/host/xhci.h      |  2 --
 3 files changed, 31 insertions(+), 39 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fb6df2c..82b5967 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -556,6 +556,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	struct xhci_ring *ep_ring;
 	struct xhci_generic_trb *trb;
 	dma_addr_t addr;
+	u64 hw_dequeue;
 
 	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
 			ep_index, stream_id);
@@ -565,16 +566,6 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 				stream_id);
 		return;
 	}
-	state->new_cycle_state = 0;
-	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-			"Finding segment containing stopped TRB.");
-	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
-			dev->eps[ep_index].stopped_trb,
-			&state->new_cycle_state);
-	if (!state->new_deq_seg) {
-		WARN_ON(1);
-		return;
-	}
 
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
@@ -583,46 +574,57 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	if (ep->ep_state & EP_HAS_STREAMS) {
 		struct xhci_stream_ctx *ctx =
 			&ep->stream_info->stream_ctx_array[stream_id];
-		state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring);
+		hw_dequeue = le64_to_cpu(ctx->stream_ring);
 	} else {
 		struct xhci_ep_ctx *ep_ctx
 			= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
-		state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+		hw_dequeue = le64_to_cpu(ep_ctx->deq);
 	}
 
+	/* Find virtual address and segment of hardware dequeue pointer */
+	state->new_deq_seg = ep_ring->deq_seg;
+	state->new_deq_ptr = ep_ring->dequeue;
+	while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
+			!= (dma_addr_t)(hw_dequeue & ~0xf)) {
+		next_trb(xhci, ep_ring, &state->new_deq_seg,
+					&state->new_deq_ptr);
+		if (state->new_deq_ptr == ep_ring->dequeue) {
+			WARN_ON(1);
+			return;
+		}
+	}
+	/*
+	 * Find cycle state for last_trb, starting at old cycle state of
+	 * hw_dequeue. If there is only one segment ring, find_trb_seg() will
+	 * return immediately and cannot toggle the cycle state if this search
+	 * wraps around, so add one more toggle manually in that case.
+	 */
+	state->new_cycle_state = hw_dequeue & 0x1;
+	if (ep_ring->first_seg == ep_ring->first_seg->next &&
+			cur_td->last_trb < state->new_deq_ptr)
+		state->new_cycle_state ^= 0x1;
+
 	state->new_deq_ptr = cur_td->last_trb;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Finding segment containing last TRB in TD.");
 	state->new_deq_seg = find_trb_seg(state->new_deq_seg,
-			state->new_deq_ptr,
-			&state->new_cycle_state);
+			state->new_deq_ptr, &state->new_cycle_state);
 	if (!state->new_deq_seg) {
 		WARN_ON(1);
 		return;
 	}
 
+	/* Increment to find next TRB after last_trb. Cycle if appropriate. */
 	trb = &state->new_deq_ptr->generic;
 	if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
 	    (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
 		state->new_cycle_state ^= 0x1;
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
-	/*
-	 * If there is only one segment in a ring, find_trb_seg()'s while loop
-	 * will not run, and it will return before it has a chance to see if it
-	 * needs to toggle the cycle bit.  It can't tell if the stalled transfer
-	 * ended just before the link TRB on a one-segment ring, or if the TD
-	 * wrapped around the top of the ring, because it doesn't have the TD in
-	 * question.  Look for the one-segment case where stalled TRB's address
-	 * is greater than the new dequeue pointer address.
-	 */
-	if (ep_ring->first_seg == ep_ring->first_seg->next &&
-			state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
-		state->new_cycle_state ^= 0x1;
+	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Cycle state = 0x%x", state->new_cycle_state);
 
-	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"New dequeue segment = %p (virtual)",
 			state->new_deq_seg);
@@ -805,7 +807,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 	if (list_empty(&ep->cancelled_td_list)) {
 		xhci_stop_watchdog_timer_in_irq(xhci, ep);
 		ep->stopped_td = NULL;
-		ep->stopped_trb = NULL;
 		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 		return;
 	}
@@ -873,11 +874,9 @@ remove_finished_td:
 		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 	}
 
-	/* Clear stopped_td and stopped_trb if endpoint is not halted */
-	if (!(ep->ep_state & EP_HALTED)) {
+	/* Clear stopped_td if endpoint is not halted */
+	if (!(ep->ep_state & EP_HALTED))
 		ep->stopped_td = NULL;
-		ep->stopped_trb = NULL;
-	}
 
 	/*
 	 * Drop the lock and complete the URBs in the cancelled TD list.
@@ -1922,14 +1921,12 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
 	ep->ep_state |= EP_HALTED;
 	ep->stopped_td = td;
-	ep->stopped_trb = event_trb;
 	ep->stopped_stream = stream_id;
 
 	xhci_queue_reset_ep(xhci, slot_id, ep_index);
 	xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
 
 	ep->stopped_td = NULL;
-	ep->stopped_trb = NULL;
 	ep->stopped_stream = 0;
 
 	xhci_ring_cmd_db(xhci);
@@ -2011,7 +2008,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		 * the ring dequeue pointer or take this TD off any lists yet.
 		 */
 		ep->stopped_td = td;
-		ep->stopped_trb = event_trb;
 		return 0;
 	} else {
 		if (trb_comp_code == COMP_STALL) {
@@ -2023,7 +2019,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 			 * USB class driver clear the stall later.
 			 */
 			ep->stopped_td = td;
-			ep->stopped_trb = event_trb;
 			ep->stopped_stream = ep_ring->stream_id;
 		} else if (xhci_requires_manual_halt_cleanup(xhci,
 					ep_ctx, trb_comp_code)) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5a646a6..07a3077 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2932,7 +2932,6 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 		xhci_ring_cmd_db(xhci);
 	}
 	virt_ep->stopped_td = NULL;
-	virt_ep->stopped_trb = NULL;
 	virt_ep->stopped_stream = 0;
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 03c74b7..1a64027 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -864,8 +864,6 @@ struct xhci_virt_ep {
 #define EP_GETTING_NO_STREAMS	(1 << 5)
 	/* ----  Related to URB cancellation ---- */
 	struct list_head	cancelled_td_list;
-	/* The TRB that was last reported in a stopped endpoint ring */
-	union xhci_trb		*stopped_trb;
 	struct xhci_td		*stopped_td;
 	unsigned int		stopped_stream;
 	/* Watchdog timer for stop endpoint command to cancel URBs */
-- 
1.9.1

[PATCH 3.13 091/160] USB: io_ti: fix firmware download on big-endian machines

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 5509076d1b4485ce9fb07705fcbcd2695907ab5b upstream.

During firmware download the device expects memory addresses in
big-endian byte order. As the wIndex parameter which hold the address is
sent in little-endian byte order regardless of host byte order, we need
to use swab16 rather than cpu_to_be16.

Also make sure to handle the struct ti_i2c_desc size parameter which is
returned in little-endian byte order.

Reported-by: Ludovic Drolez <ldrolez@debian.org>
Tested-by: Ludovic Drolez <ldrolez@debian.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/io_ti.c | 50 ++++++++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index b7187bf..1c7bc52 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -29,6 +29,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/serial.h>
+#include <linux/swab.h>
 #include <linux/kfifo.h>
 #include <linux/ioctl.h>
 #include <linux/firmware.h>
@@ -281,7 +282,7 @@ static int read_download_mem(struct usb_device *dev, int start_address,
 {
 	int status = 0;
 	__u8 read_length;
-	__be16 be_start_address;
+	u16 be_start_address;
 
 	dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
 
@@ -297,10 +298,14 @@ static int read_download_mem(struct usb_device *dev, int start_address,
 		if (read_length > 1) {
 			dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
 		}
-		be_start_address = cpu_to_be16(start_address);
+		/*
+		 * NOTE: Must use swab as wIndex is sent in little-endian
+		 *       byte order regardless of host byte order.
+		 */
+		be_start_address = swab16((u16)start_address);
 		status = ti_vread_sync(dev, UMPC_MEMORY_READ,
 					(__u16)address_type,
-					(__force __u16)be_start_address,
+					be_start_address,
 					buffer, read_length);
 
 		if (status) {
@@ -397,7 +402,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 	struct device *dev = &serial->serial->dev->dev;
 	int status = 0;
 	int write_length;
-	__be16 be_start_address;
+	u16 be_start_address;
 
 	/* We can only send a maximum of 1 aligned byte page at a time */
 
@@ -412,11 +417,16 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 		__func__, start_address, write_length);
 	usb_serial_debug_data(dev, __func__, write_length, buffer);
 
-	/* Write first page */
-	be_start_address = cpu_to_be16(start_address);
+	/*
+	 * Write first page.
+	 *
+	 * NOTE: Must use swab as wIndex is sent in little-endian byte order
+	 *       regardless of host byte order.
+	 */
+	be_start_address = swab16((u16)start_address);
 	status = ti_vsend_sync(serial->serial->dev,
 				UMPC_MEMORY_WRITE, (__u16)address_type,
-				(__force __u16)be_start_address,
+				be_start_address,
 				buffer,	write_length);
 	if (status) {
 		dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
@@ -439,11 +449,16 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 			__func__, start_address, write_length);
 		usb_serial_debug_data(dev, __func__, write_length, buffer);
 
-		/* Write next page */
-		be_start_address = cpu_to_be16(start_address);
+		/*
+		 * Write next page.
+		 *
+		 * NOTE: Must use swab as wIndex is sent in little-endian byte
+		 *       order regardless of host byte order.
+		 */
+		be_start_address = swab16((u16)start_address);
 		status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
 				(__u16)address_type,
-				(__force __u16)be_start_address,
+				be_start_address,
 				buffer, write_length);
 		if (status) {
 			dev_err(dev, "%s - ERROR %d\n", __func__, status);
@@ -590,8 +605,8 @@ static int get_descriptor_addr(struct edgeport_serial *serial,
 		if (rom_desc->Type == desc_type)
 			return start_address;
 
-		start_address = start_address + sizeof(struct ti_i2c_desc)
-							+ rom_desc->Size;
+		start_address = start_address + sizeof(struct ti_i2c_desc) +
+						le16_to_cpu(rom_desc->Size);
 
 	} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
 
@@ -604,7 +619,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
 	__u16 i;
 	__u8 cs = 0;
 
-	for (i = 0; i < rom_desc->Size; i++)
+	for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
 		cs = (__u8)(cs + buffer[i]);
 
 	if (cs != rom_desc->CheckSum) {
@@ -658,7 +673,7 @@ static int check_i2c_image(struct edgeport_serial *serial)
 			break;
 
 		if ((start_address + sizeof(struct ti_i2c_desc) +
-					rom_desc->Size) > TI_MAX_I2C_SIZE) {
+			le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
 			status = -ENODEV;
 			dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
 			break;
@@ -673,7 +688,8 @@ static int check_i2c_image(struct edgeport_serial *serial)
 			/* Read the descriptor data */
 			status = read_rom(serial, start_address +
 						sizeof(struct ti_i2c_desc),
-						rom_desc->Size, buffer);
+						le16_to_cpu(rom_desc->Size),
+						buffer);
 			if (status)
 				break;
 
@@ -682,7 +698,7 @@ static int check_i2c_image(struct edgeport_serial *serial)
 				break;
 		}
 		start_address = start_address + sizeof(struct ti_i2c_desc) +
-								rom_desc->Size;
+						le16_to_cpu(rom_desc->Size);
 
 	} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
 				(start_address < TI_MAX_I2C_SIZE));
@@ -721,7 +737,7 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
 
 	/* Read the descriptor data */
 	status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
-						rom_desc->Size, buffer);
+					le16_to_cpu(rom_desc->Size), buffer);
 	if (status)
 		goto exit;
 
-- 
1.9.1

[PATCH 3.13 092/160] usb: qcserial: add Sierra Wireless EM7355

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit a00986f81182a69dee4d2c48e8c19805bdf0f790 upstream.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/qcserial.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 968a402..6622352 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -139,6 +139,9 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)},	/* Sierra Wireless EM7700 Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)},	/* Sierra Wireless EM7700 NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)},	/* Sierra Wireless EM7700 Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)},	/* Sierra Wireless EM7355 Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)},	/* Sierra Wireless EM7355 NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)},	/* Sierra Wireless EM7355 Modem */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)},	/* Netgear AirCard 340U Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)},	/* Netgear AirCard 340U NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)},	/* Netgear AirCard 340U Modem */
-- 
1.9.1

[PATCH 3.13 093/160] usb: qcserial: add Sierra Wireless MC73xx

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 upstream.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/qcserial.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 6622352..1d1bc9b 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -136,6 +136,9 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)},	/* Sierra Wireless MC7710 Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)},	/* Sierra Wireless MC7710 NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)},	/* Sierra Wireless MC7710 Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 0)},	/* Sierra Wireless MC73xx Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 2)},	/* Sierra Wireless MC73xx NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 3)},	/* Sierra Wireless MC73xx Modem */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)},	/* Sierra Wireless EM7700 Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)},	/* Sierra Wireless EM7700 NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)},	/* Sierra Wireless EM7700 Modem */
-- 
1.9.1

[PATCH 3.13 094/160] usb: qcserial: add Sierra Wireless MC7305/MC7355

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit bce4f588f19d59fc07fadfeb0b2a3a06c942827a upstream.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/qcserial.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 1d1bc9b..7ed681a 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -145,6 +145,9 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)},	/* Sierra Wireless EM7355 Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)},	/* Sierra Wireless EM7355 NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)},	/* Sierra Wireless EM7355 Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 0)},	/* Sierra Wireless MC7305/MC7355 Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 2)},	/* Sierra Wireless MC7305/MC7355 NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 3)},	/* Sierra Wireless MC7305/MC7355 Modem */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)},	/* Netgear AirCard 340U Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)},	/* Netgear AirCard 340U NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)},	/* Netgear AirCard 340U Modem */
-- 
1.9.1

[PATCH 3.13 095/160] usb: option: add Olivetti Olicard 500

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit 533b3994610f316e5cd61b56d0c4daa15c830f89 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/ff/ff - serial AT+PPP
2: 08/06/50 - storage
3: ff/ff/ff - serial
4: ff/ff/ff - QMI/wwan

Reported-by: Julio Araujo <julio.araujo@wllctel.com.br>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/option.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 367c7f0..6335222 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -349,6 +349,7 @@ static void option_instat_callback(struct urb *urb);
 #define OLIVETTI_PRODUCT_OLICARD100		0xc000
 #define OLIVETTI_PRODUCT_OLICARD145		0xc003
 #define OLIVETTI_PRODUCT_OLICARD200		0xc005
+#define OLIVETTI_PRODUCT_OLICARD500		0xc00b
 
 /* Celot products */
 #define CELOT_VENDOR_ID				0x211f
@@ -1545,6 +1546,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
 		.driver_info = (kernel_ulong_t)&net_intf6_blacklist
 	},
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist
+	},
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
-- 
1.9.1

[PATCH 3.13 096/160] usb: option: add Alcatel L800MA

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit dd6b48ecec2ea7d15f28d5e5474388681899a5e1 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/00/00 - serial AT+PPP
2: ff/ff/ff - QMI/wwan
3: 08/06/50 - storage

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6335222..776c86f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -287,6 +287,7 @@ static void option_instat_callback(struct urb *urb);
 #define ALCATEL_PRODUCT_X060S_X200		0x0000
 #define ALCATEL_PRODUCT_X220_X500D		0x0017
 #define ALCATEL_PRODUCT_L100V			0x011e
+#define ALCATEL_PRODUCT_L800MA			0x0203
 
 #define PIRELLI_VENDOR_ID			0x1266
 #define PIRELLI_PRODUCT_C100_1			0x1002
@@ -1501,6 +1502,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
+	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
-- 
1.9.1

[PATCH 3.13 097/160] usb: option: add and update a number of CMOTech devices

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b upstream.

A number of older CMOTech modems are based on Qualcomm
chips.  The blacklisted interfaces are QMI/wwan.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/option.c | 74 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 70 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 776c86f..f213ee9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -234,8 +234,31 @@ static void option_instat_callback(struct urb *urb);
 #define QUALCOMM_VENDOR_ID			0x05C6
 
 #define CMOTECH_VENDOR_ID			0x16d8
-#define CMOTECH_PRODUCT_6008			0x6008
-#define CMOTECH_PRODUCT_6280			0x6280
+#define CMOTECH_PRODUCT_6001			0x6001
+#define CMOTECH_PRODUCT_CMU_300			0x6002
+#define CMOTECH_PRODUCT_6003			0x6003
+#define CMOTECH_PRODUCT_6004			0x6004
+#define CMOTECH_PRODUCT_6005			0x6005
+#define CMOTECH_PRODUCT_CGU_628A		0x6006
+#define CMOTECH_PRODUCT_CHE_628S		0x6007
+#define CMOTECH_PRODUCT_CMU_301			0x6008
+#define CMOTECH_PRODUCT_CHU_628			0x6280
+#define CMOTECH_PRODUCT_CHU_628S		0x6281
+#define CMOTECH_PRODUCT_CDU_680			0x6803
+#define CMOTECH_PRODUCT_CDU_685A		0x6804
+#define CMOTECH_PRODUCT_CHU_720S		0x7001
+#define CMOTECH_PRODUCT_7002			0x7002
+#define CMOTECH_PRODUCT_CHU_629K		0x7003
+#define CMOTECH_PRODUCT_7004			0x7004
+#define CMOTECH_PRODUCT_7005			0x7005
+#define CMOTECH_PRODUCT_CGU_629			0x7006
+#define CMOTECH_PRODUCT_CHU_629S		0x700a
+#define CMOTECH_PRODUCT_CHU_720I		0x7211
+#define CMOTECH_PRODUCT_7212			0x7212
+#define CMOTECH_PRODUCT_7213			0x7213
+#define CMOTECH_PRODUCT_7251			0x7251
+#define CMOTECH_PRODUCT_7252			0x7252
+#define CMOTECH_PRODUCT_7253			0x7253
 
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
@@ -504,6 +527,10 @@ static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
 
+static const struct option_blacklist_info net_intf0_blacklist = {
+	.reserved = BIT(0),
+};
+
 static const struct option_blacklist_info net_intf1_blacklist = {
 	.reserved = BIT(1),
 };
@@ -1037,8 +1064,47 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
-	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
-	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
+	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
-- 
1.9.1

[PATCH 3.13 098/160] word-at-a-time: avoid undefined behaviour in zero_bytemask macro

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit ec6931b281797b69e6cf109f9cc94d5a2bf994e0 upstream.

The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.

Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.

An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.

Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.

Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 include/asm-generic/word-at-a-time.h | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/include/asm-generic/word-at-a-time.h b/include/asm-generic/word-at-a-time.h
index d3909ef..d96deb4 100644
--- a/include/asm-generic/word-at-a-time.h
+++ b/include/asm-generic/word-at-a-time.h
@@ -50,11 +50,7 @@ static inline bool has_zero(unsigned long val, unsigned long *data, const struct
 }
 
 #ifndef zero_bytemask
-#ifdef CONFIG_64BIT
-#define zero_bytemask(mask)	(~0ul << fls64(mask))
-#else
-#define zero_bytemask(mask)	(~0ul << fls(mask))
-#endif /* CONFIG_64BIT */
-#endif /* zero_bytemask */
+#define zero_bytemask(mask) (~0ul << __fls(mask) << 1)
+#endif
 
 #endif /* _ASM_WORD_AT_A_TIME_H */
-- 
1.9.1

[PATCH 3.13 099/160] s390/chsc: fix SEI usage on old FW levels

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Ott <sebott@linux.vnet.ibm.com>

commit 06cd7a874ec6e09d151aeb1fa8600e14f1ff89f6 upstream.

Using a notification type mask for the store event information chsc
is unsupported on some firmware levels. Retry SEI with that mask set
to zero (which is the old way of requesting only channel subsystem
related events).

Reported-and-tested-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/s390/cio/chsc.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 13299f9..ec0951a 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -560,18 +560,27 @@ static void chsc_process_sei_nt0(struct chsc_sei_nt0_area *sei_area)
 
 static void chsc_process_event_information(struct chsc_sei *sei, u64 ntsm)
 {
-	do {
+	static int ntsm_unsupported;
+
+	while (true) {
 		memset(sei, 0, sizeof(*sei));
 		sei->request.length = 0x0010;
 		sei->request.code = 0x000e;
-		sei->ntsm = ntsm;
+		if (!ntsm_unsupported)
+			sei->ntsm = ntsm;
 
 		if (chsc(sei))
 			break;
 
 		if (sei->response.code != 0x0001) {
-			CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x)\n",
-				      sei->response.code);
+			CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x, ntsm=%llx)\n",
+				      sei->response.code, sei->ntsm);
+
+			if (sei->response.code == 3 && sei->ntsm) {
+				/* Fallback for old firmware. */
+				ntsm_unsupported = 1;
+				continue;
+			}
 			break;
 		}
 
@@ -587,7 +596,10 @@ static void chsc_process_event_information(struct chsc_sei *sei, u64 ntsm)
 			CIO_CRW_EVENT(2, "chsc: unhandled nt: %d\n", sei->nt);
 			break;
 		}
-	} while (sei->u.nt0_area.flags & 0x80);
+
+		if (!(sei->u.nt0_area.flags & 0x80))
+			break;
+	}
 }
 
 /*
-- 
1.9.1

[PATCH 3.13 100/160] irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

commit da343fc776e0bcb238b65d9d24610819b95d0ef4 upstream.

The armada_370_xp_alloc_msi() function returns a signed int, which is
negative on error. However, we store the return value into an
irq_hw_number_t, which is unsigned. Therefore, we actually never test
if armada_370_xp_alloc_msi() returns an error or not, which may lead
us to use hwirq numbers of as 0xffffffe4 (when
armada_370_xp_alloc_msi() returns -ENOSPC).

This commit fixes that by storing the return value of
armada_370_xp_alloc_msi() in a signed variable.

Fixes: 31f614edb726fcc4d5aa0f2895fbdec9b04a3ca4 ('irqchip: armada-370-xp: implement MSI support')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-2-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Neil Greatorex <neil@fatboyfat.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/irqchip/irq-armada-370-xp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 3fac063..79eb0d1 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -132,8 +132,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 				       struct msi_desc *desc)
 {
 	struct msi_msg msg;
-	irq_hw_number_t hwirq;
-	int virq;
+	int virq, hwirq;
 
 	hwirq = armada_370_xp_alloc_msi();
 	if (hwirq < 0)
-- 
1.9.1

[PATCH 3.13 101/160] irqchip: armada-370-xp: implement the ->check_device() msi_chip operation

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

commit 830cbe4b7a918613276aa3d3b28d24410623f92c upstream.

Until now, we were leaving the ->check_device() msi_chip operation
empty, which leads the PCI core to believe that we support both MSI
and MSI-X. In fact, we do not support MSI-X, so we have to tell this
to the PCI core by providing an implementation of this operation.

Fixes: 31f614edb726fcc4d5aa0f2895fbdec9b04a3ca4 ('irqchip: armada-370-xp: implement MSI support')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-3-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Neil Greatorex <neil@fatboyfat.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/irqchip/irq-armada-370-xp.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 79eb0d1..6cb87c4 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -162,6 +162,15 @@ static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
 	armada_370_xp_free_msi(d->hwirq);
 }
 
+static int armada_370_xp_check_msi_device(struct msi_chip *chip, struct pci_dev *dev,
+					  int nvec, int type)
+{
+	/* We support MSI, but not MSI-X */
+	if (type == PCI_CAP_ID_MSI)
+		return 0;
+	return -EINVAL;
+}
+
 static struct irq_chip armada_370_xp_msi_irq_chip = {
 	.name = "armada_370_xp_msi_irq",
 	.irq_enable = unmask_msi_irq,
@@ -200,6 +209,7 @@ static int armada_370_xp_msi_init(struct device_node *node,
 
 	msi_chip->setup_irq = armada_370_xp_setup_msi_irq;
 	msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq;
+	msi_chip->check_device = armada_370_xp_check_msi_device;
 	msi_chip->of_node = node;
 
 	armada_370_xp_msi_domain =
-- 
1.9.1

[PATCH 3.13 102/160] irqchip: armada-370-xp: Fix releasing of MSIs

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Greatorex <neil@fatboyfat.co.uk>

commit ff3c664505bf8a8334bca5045e87b85cfe4d2277 upstream.

Store the value of d->hwirq in a local variable as the real value is wiped out
by calling irq_dispose_mapping. Without this patch, the armada_370_xp_free_msi
function would always free MSI#0, no matter what was passed to it.

Fixes: 31f614edb726fcc4d5aa0f2895fbdec9b04a3ca4 ('irqchip: armada-370-xp: implement MSI support')
Signed-off-by: Neil Greatorex <neil@fatboyfat.co.uk>
Link: https://lkml.kernel.org/r/1397823593-1932-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/irqchip/irq-armada-370-xp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 6cb87c4..d9cd6df 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -158,8 +158,10 @@ static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
 					   unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
+	unsigned long hwirq = d->hwirq;
+
 	irq_dispose_mapping(irq);
-	armada_370_xp_free_msi(d->hwirq);
+	armada_370_xp_free_msi(hwirq);
 }
 
 static int armada_370_xp_check_msi_device(struct msi_chip *chip, struct pci_dev *dev,
-- 
1.9.1

[PATCH 3.13 103/160] ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrol

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

commit 2697e4fb9209dfe1d1b24c92d254158f63d4bc8e upstream.

Commit 9e1fda4ae158 ("ASoC: dapm: Implement mixer input auto-disable")
is trying to free the widget it allocated by snd_soc_dapm_new_control()
call in dapm_kcontrol_data_alloc() by adding kfree(data->widget) to
dapm_kcontrol_free().

This is causing a widget double free with auto-disabled DAPM kcontrols
in sound card unregistration because widgets are already freed before
dapm_kcontrol_free() is called.

Reason for that is all widgets are added into dapm->card->widgets list
in snd_soc_dapm_new_control() and freed in dapm_free_widgets() during
execution of snd_soc_dapm_free().

Now snd_soc_dapm_free() calls for different DAPM contexts happens before
snd_card_free() call from where the call chain to dapm_kcontrol_free()
begins:

soc_cleanup_card_resources()
  soc_remove_dai_links()
    soc_remove_link_dais()
      snd_soc_dapm_free(&cpu_dai->dapm)
    soc_remove_link_components()
      soc_remove_platform()
        snd_soc_dapm_free(&platform->dapm)
      soc_remove_codec()
        snd_soc_dapm_free(&codec->dapm)
  snd_soc_dapm_free(&card->dapm)
  snd_card_free()
    snd_card_do_free()
      snd_device_free_all()
        snd_device_free()
          snd_ctl_dev_free()
            snd_ctl_remove()
              snd_ctl_free_one()
                dapm_kcontrol_free()

This wasn't making harm with ordinary DAPM kcontrols since data->widget is NULL for
them.

Fixes: 9e1fda4ae158 (ASoC: dapm: Implement mixer input auto-disable)
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/soc/soc-dapm.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index dcade13..2e6f4ec 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -251,7 +251,6 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget,
 static void dapm_kcontrol_free(struct snd_kcontrol *kctl)
 {
 	struct dapm_kcontrol_data *data = snd_kcontrol_chip(kctl);
-	kfree(data->widget);
 	kfree(data->wlist);
 	kfree(data);
 }
-- 
1.9.1

[PATCH 3.13 104/160] drm/i915: Don't check gmch state on inherited configs

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 9953599bc02dbc1d3330e6a0bfc6c50e9dffcac6 upstream.

... our current modeset code isn't good enough yet to handle this. The
scenario is:

1. BIOS sets up a cloned config with lvds+external screen on the same
pipe, e.g. pipe B.

2. We read out that state for pipe B and assign the gmch_pfit state to
it.

3. The initial modeset switches the lvds to pipe A but due to lack of
atomic modeset we don't recompute the config of pipe B.

-> both pipes now claim (in the sw pipe config structure) to use the
gmch_pfit, which just won't work.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74081
Tested-by: max <manikulin@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/i915/intel_display.c | 23 ++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 334cf3f..10315b0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9125,11 +9125,22 @@ intel_pipe_config_compare(struct drm_device *dev,
 	PIPE_CONF_CHECK_I(pipe_src_w);
 	PIPE_CONF_CHECK_I(pipe_src_h);
 
-	PIPE_CONF_CHECK_I(gmch_pfit.control);
-	/* pfit ratios are autocomputed by the hw on gen4+ */
-	if (INTEL_INFO(dev)->gen < 4)
-		PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
-	PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+	/*
+	 * FIXME: BIOS likes to set up a cloned config with lvds+external
+	 * screen. Since we don't yet re-compute the pipe config when moving
+	 * just the lvds port away to another pipe the sw tracking won't match.
+	 *
+	 * Proper atomic modesets with recomputed global state will fix this.
+	 * Until then just don't check gmch state for inherited modes.
+	 */
+	if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) {
+		PIPE_CONF_CHECK_I(gmch_pfit.control);
+		/* pfit ratios are autocomputed by the hw on gen4+ */
+		if (INTEL_INFO(dev)->gen < 4)
+			PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
+		PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+	}
+
 	PIPE_CONF_CHECK_I(pch_pfit.enabled);
 	if (current_config->pch_pfit.enabled) {
 		PIPE_CONF_CHECK_I(pch_pfit.pos);
@@ -10919,6 +10930,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			    base.head) {
 		memset(&crtc->config, 0, sizeof(crtc->config));
 
+		crtc->config.quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
+
 		crtc->active = dev_priv->display.get_pipe_config(crtc,
 								 &crtc->config);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 79f91f2..d6e5653 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -207,7 +207,8 @@ struct intel_crtc_config {
 	 * tracked with quirk flags so that fastboot and state checker can act
 	 * accordingly.
 	 */
-#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
+#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS	(1<<0) /* unreliable sync mode.flags */
+#define PIPE_CONFIG_QUIRK_INHERITED_MODE	(1<<1) /* mode inherited from firmware */
 	unsigned long quirks;
 
 	/* User requested mode, only valid as a starting point to
-- 
1.9.1

[PATCH 3.13 105/160] drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit cbd75e97a525e3819c02dc18bc2d67aa544c9e45 upstream.

We already check that the buffer object we're accessing is registered with
the file. Now also make sure that we can't DMA across buffer object boundaries.

v2: Code commenting update.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index 8b059eb..1b9aa98 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -834,14 +834,36 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv,
 		SVGA3dCmdSurfaceDMA dma;
 	} *cmd;
 	int ret;
+	SVGA3dCmdSurfaceDMASuffix *suffix;
+	uint32_t bo_size;
 
 	cmd = container_of(header, struct vmw_dma_cmd, header);
+	suffix = (SVGA3dCmdSurfaceDMASuffix *)((unsigned long) &cmd->dma +
+					       header->size - sizeof(*suffix));
+
+	/* Make sure device and verifier stays in sync. */
+	if (unlikely(suffix->suffixSize != sizeof(*suffix))) {
+		DRM_ERROR("Invalid DMA suffix size.\n");
+		return -EINVAL;
+	}
+
 	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
 				      &cmd->dma.guest.ptr,
 				      &vmw_bo);
 	if (unlikely(ret != 0))
 		return ret;
 
+	/* Make sure DMA doesn't cross BO boundaries. */
+	bo_size = vmw_bo->base.num_pages * PAGE_SIZE;
+	if (unlikely(cmd->dma.guest.ptr.offset > bo_size)) {
+		DRM_ERROR("Invalid DMA offset.\n");
+		return -EINVAL;
+	}
+
+	bo_size -= cmd->dma.guest.ptr.offset;
+	if (unlikely(suffix->maximumOffset > bo_size))
+		suffix->maximumOffset = bo_size;
+
 	ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface,
 				user_surface_converter, &cmd->dma.host.sid,
 				NULL);
-- 
1.9.1

[PATCH 3.13 106/160] of/irq: do irq resolution in platform_get_irq

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Herring <robh@kernel.org>

commit 9ec36cafe43bf835f8f29273597a5b0cbc8267ef upstream.

Currently we get the following kind of errors if we try to use interrupt
phandles to irqchips that have not yet initialized:

irq: no irq domain found for /ocp/pinmux@48002030 !
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012
(show_stack+0x14/0x1c)
(dump_stack+0x6c/0xa0)
(warn_slowpath_common+0x64/0x84)
(warn_slowpath_null+0x1c/0x24)
(of_device_alloc+0x144/0x184)
(of_platform_device_create_pdata+0x44/0x9c)
(of_platform_bus_create+0xd0/0x170)
(of_platform_bus_create+0x12c/0x170)
(of_platform_populate+0x60/0x98)

This is because we're wrongly trying to populate resources that are not
yet available. It's perfectly valid to create irqchips dynamically, so
let's fix up the issue by resolving the interrupt resources when
platform_get_irq is called.

And then we also need to accept the fact that some irqdomains do not
exist that early on, and only get initialized later on. So we can
make the current WARN_ON into just into a pr_debug().

We still attempt to populate irq resources when we create the devices.
This allows current drivers which don't use platform_get_irq to continue
to function. Once all drivers are fixed, this code can be removed.

Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/base/platform.c |  7 ++++++-
 drivers/of/irq.c        | 26 ++++++++++++++++++++++++++
 drivers/of/platform.c   |  4 +++-
 include/linux/of_irq.h  |  5 +++++
 4 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 3a94b79..39d2f6b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -13,6 +13,7 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
@@ -87,7 +88,11 @@ int platform_get_irq(struct platform_device *dev, unsigned int num)
 		return -ENXIO;
 	return dev->archdata.irqs[num];
 #else
-	struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);
+	struct resource *r;
+	if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node)
+		return of_irq_get(dev->dev.of_node, num);
+
+	r = platform_get_resource(dev, IORESOURCE_IRQ, num);
 
 	return r ? r->start : -ENXIO;
 #endif
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 2721240..11c7f73 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -377,6 +377,32 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
 EXPORT_SYMBOL_GPL(of_irq_to_resource);
 
 /**
+ * of_irq_get - Decode a node's IRQ and return it as a Linux irq number
+ * @dev: pointer to device tree node
+ * @index: zero-based index of the irq
+ *
+ * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain
+ * is not yet created.
+ *
+ */
+int of_irq_get(struct device_node *dev, int index)
+{
+	int rc;
+	struct of_phandle_args oirq;
+	struct irq_domain *domain;
+
+	rc = of_irq_parse_one(dev, index, &oirq);
+	if (rc)
+		return rc;
+
+	domain = irq_find_host(oirq.np);
+	if (!domain)
+		return -EPROBE_DEFER;
+
+	return irq_create_of_mapping(&oirq);
+}
+
+/**
  * of_irq_count - Count the number of IRQs a node uses
  * @dev: pointer to device tree node
  */
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 404d1da..bd47fbc 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -168,7 +168,9 @@ struct platform_device *of_device_alloc(struct device_node *np,
 			rc = of_address_to_resource(np, i, res);
 			WARN_ON(rc);
 		}
-		WARN_ON(of_irq_to_resource_table(np, res, num_irq) != num_irq);
+		if (of_irq_to_resource_table(np, res, num_irq) != num_irq)
+			pr_debug("not all legacy IRQ resources mapped for %s\n",
+				 np->name);
 	}
 
 	dev->dev.of_node = of_node_get(np);
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 3f23b44..6404253 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -44,11 +44,16 @@ extern void of_irq_init(const struct of_device_id *matches);
 
 #ifdef CONFIG_OF_IRQ
 extern int of_irq_count(struct device_node *dev);
+extern int of_irq_get(struct device_node *dev, int index);
 #else
 static inline int of_irq_count(struct device_node *dev)
 {
 	return 0;
 }
+static inline int of_irq_get(struct device_node *dev, int index)
+{
+	return 0;
+}
 #endif
 
 #if defined(CONFIG_OF)
-- 
1.9.1

[PATCH 3.13 107/160] s390/bpf,jit: initialize A register if 1st insn is BPF_S_LDX_B_MSH

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

commit 6e0de817594c61f3b392a9245deeb09609ec707d upstream.

The A register needs to be initialized to zero in the prolog if the
first instruction of the BPF program is BPF_S_LDX_B_MSH to prevent
leaking the content of %r5 to user space.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/s390/net/bpf_jit_comp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 708d60e..a778ee2 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -276,7 +276,6 @@ static void bpf_jit_noleaks(struct bpf_jit *jit, struct sock_filter *filter)
 	case BPF_S_LD_W_IND:
 	case BPF_S_LD_H_IND:
 	case BPF_S_LD_B_IND:
-	case BPF_S_LDX_B_MSH:
 	case BPF_S_LD_IMM:
 	case BPF_S_LD_MEM:
 	case BPF_S_MISC_TXA:
-- 
1.9.1

[PATCH 3.13 108/160] drm/i915: Don't WARN nor handle unexpected hpd interrupts on gmch platforms

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 3ff04a160a891e56cdcee5c198d4c764d1c8c78b upstream.

The status bits are unconditionally set, the control bits only enable
the actual interrupt generation. Which means if we get some random
other interrupts we'll bogusly complain about them.

So restrict the WARN to platforms with a sane hotplug interrupt
handling scheme. And even more important also don't attempt to process
the hpd bit since we've detected a storm already. Instead just clear
the bit silently.

This WARN has been introduced in

commit b8f102e8bf71cacf33326360fdf9dcfd1a63925b
Author: Egbert Eich <eich@suse.de>
Date:   Fri Jul 26 14:14:24 2013 +0200

    drm/i915: Add messages useful for HPD storm detection debugging (v2)

before that we silently handled the hpd event and so partially
defeated the storm detection.

v2: Pimp commit message (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Egbert Eich <eich@suse.de>
Cc: bitlord <bitlord0xff@gmail.com>
Reported-by: bitlord <bitlord0xff@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[ kamal: backport to 3.13-stable: context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9702704..4ad5cc5 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1234,9 +1234,20 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev,
 	spin_lock(&dev_priv->irq_lock);
 	for (i = 1; i < HPD_NUM_PINS; i++) {
 
-		WARN(((hpd[i] & hotplug_trigger) &&
-		      dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED),
-		     "Received HPD interrupt although disabled\n");
+		if (hpd[i] & hotplug_trigger &&
+		    dev_priv->hpd_stats[i].hpd_mark == HPD_DISABLED) {
+			/*
+			 * On GMCH platforms the interrupt mask bits only
+			 * prevent irq generation, not the setting of the
+			 * hotplug bits itself. So only WARN about unexpected
+			 * interrupts on saner platforms.
+			 */
+			WARN_ONCE(INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev),
+				  "Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n",
+				  hotplug_trigger, i, hpd[i]);
+
+			continue;
+		}
 
 		if (!(hpd[i] & hotplug_trigger) ||
 		    dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
-- 
1.9.1

[PATCH 3.13 109/160] module: remove warning about waiting module removal.

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rusty Russell <rusty@rustcorp.com.au>

commit 79465d2fd48e68940c2bdecddbdecd45bbba06fe upstream.

We remove the waiting module removal in commit 3f2b9c9cdf38 (September
2013), but it turns out that modprobe in kmod (< version 16) was
asking for waiting module removal.  No one noticed since modprobe would
check for 0 usage immediately before trying to remove the module, and
the race is unlikely.

However, it means that anyone running old (but not ancient) kmod
versions is hitting the printk designed to see if anyone was running
"rmmod -w".  All reports so far have been false positives, so remove
the warning.

Fixes: 3f2b9c9cdf389e303b2273679af08aab5f153517
Reported-by: Valerio Vanni <valerio.vanni@inwind.it>
Cc: Elliott, Robert (Server Storage) <Elliott@hp.com>
Acked-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[ kamal: backport to 3.13: context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 kernel/module.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index f5a3b1e..6b931bd 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -815,11 +815,6 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
 		return -EFAULT;
 	name[MODULE_NAME_LEN-1] = '\0';
 
-	if (!(flags & O_NONBLOCK)) {
-		printk(KERN_WARNING
-		       "waiting module removal not supported: please upgrade");
-	}
-
 	if (mutex_lock_interruptible(&module_mutex) != 0)
 		return -EINTR;
 
-- 
1.9.1

[PATCH 3.13 110/160] ALSA: hda - add headset mic detect quirk for a Dell laptop

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit e32dfbed8cc06aac72528e2bb53067ce02262413 upstream.

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x10280674), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b88e912..cee8c88 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4409,6 +4409,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x065f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0662, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0667, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x0674, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
-- 
1.9.1

[PATCH 3.13 111/160] arm: KVM: fix possible misalignment of PGDs and bounce page

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Salter <msalter@redhat.com>

commit 5d4e08c45a6cf8f1ab3c7fa375007635ac569165 upstream.

The kvm/mmu code shared by arm and arm64 uses kalloc() to allocate
a bounce page (if hypervisor init code crosses page boundary) and
hypervisor PGDs. The problem is that kalloc() does not guarantee
the proper alignment. In the case of the bounce page, the page sized
buffer allocated may also cross a page boundary negating the purpose
and leading to a hang during kvm initialization. Likewise the PGDs
allocated may not meet the minimum alignment requirements of the
underlying MMU. This patch uses __get_free_page() to guarantee the
worst case alignment needs of the bounce page and PGDs on both arm
and arm64.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arm/kvm/mmu.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 5809069..d2370d4 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -42,6 +42,8 @@ static unsigned long hyp_idmap_start;
 static unsigned long hyp_idmap_end;
 static phys_addr_t hyp_idmap_vector;
 
+#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
+
 #define kvm_pmd_huge(_x)	(pmd_huge(_x) || pmd_trans_huge(_x))
 
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
@@ -199,14 +201,14 @@ void free_boot_hyp_pgd(void)
 	if (boot_hyp_pgd) {
 		unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
 		unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
-		kfree(boot_hyp_pgd);
+		free_pages((unsigned long)boot_hyp_pgd, pgd_order);
 		boot_hyp_pgd = NULL;
 	}
 
 	if (hyp_pgd)
 		unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 
-	kfree(init_bounce_page);
+	free_page((unsigned long)init_bounce_page);
 	init_bounce_page = NULL;
 
 	mutex_unlock(&kvm_hyp_pgd_mutex);
@@ -236,7 +238,7 @@ void free_hyp_pgds(void)
 		for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
 			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
 
-		kfree(hyp_pgd);
+		free_pages((unsigned long)hyp_pgd, pgd_order);
 		hyp_pgd = NULL;
 	}
 
@@ -928,7 +930,7 @@ int kvm_mmu_init(void)
 		size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start;
 		phys_addr_t phys_base;
 
-		init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		init_bounce_page = (void *)__get_free_page(GFP_KERNEL);
 		if (!init_bounce_page) {
 			kvm_err("Couldn't allocate HYP init bounce page\n");
 			err = -ENOMEM;
@@ -954,8 +956,9 @@ int kvm_mmu_init(void)
 			 (unsigned long)phys_base);
 	}
 
-	hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
-	boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
+	hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+	boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+
 	if (!hyp_pgd || !boot_hyp_pgd) {
 		kvm_err("Hyp mode PGD not allocated\n");
 		err = -ENOMEM;
-- 
1.9.1

[PATCH 3.13 112/160] KVM: ARM: vgic: Fix sgi dispatch problem

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haibin Wang <wanghaibin.wang@huawei.com>

commit 91021a6c8ffdc55804dab5acdfc7de4f278b9ac3 upstream.

When dispatch SGI(mode == 0), that is the vcpu of VM should send
sgi to the cpu which the target_cpus list.
So, there must add the "break" to branch of case 0.

Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 virt/kvm/arm/vgic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 685fc72..b001dbf 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -751,6 +751,7 @@ static void vgic_dispatch_sgi(struct kvm_vcpu *vcpu, u32 reg)
 	case 0:
 		if (!target_cpus)
 			return;
+		break;
 
 	case 1:
 		target_cpus = ((1 << nrcpus) - 1) & ~(1 << vcpu_id) & 0xff;
-- 
1.9.1

[PATCH 3.13 113/160] KVM: async_pf: mm->mm_users can not pin apf->mm

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

commit 41c22f626254b9dc0376928cae009e73d1b6a49a upstream.

get_user_pages(mm) is simply wrong if mm->mm_users == 0 and exit_mmap/etc
was already called (or is in progress), mm->mm_count can only pin mm->pgd
and mm_struct itself.

Change kvm_setup_async_pf/async_pf_execute to inc/dec mm->mm_users.

kvm_create_vm/kvm_destroy_vm play with ->mm_count too but this case looks
fine at first glance, it seems that this ->mm is only used to verify that
current->mm == kvm->mm.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 virt/kvm/async_pf.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/virt/kvm/async_pf.c b/virt/kvm/async_pf.c
index 8631d9c..f2c80d5 100644
--- a/virt/kvm/async_pf.c
+++ b/virt/kvm/async_pf.c
@@ -85,7 +85,7 @@ static void async_pf_execute(struct work_struct *work)
 	if (waitqueue_active(&vcpu->wq))
 		wake_up_interruptible(&vcpu->wq);
 
-	mmdrop(mm);
+	mmput(mm);
 	kvm_put_kvm(vcpu->kvm);
 }
 
@@ -98,7 +98,7 @@ void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu)
 				   typeof(*work), queue);
 		list_del(&work->queue);
 		if (cancel_work_sync(&work->work)) {
-			mmdrop(work->mm);
+			mmput(work->mm);
 			kvm_put_kvm(vcpu->kvm); /* == work->vcpu->kvm */
 			kmem_cache_free(async_pf_cache, work);
 		}
@@ -162,7 +162,7 @@ int kvm_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
 	work->addr = gfn_to_hva(vcpu->kvm, gfn);
 	work->arch = *arch;
 	work->mm = current->mm;
-	atomic_inc(&work->mm->mm_count);
+	atomic_inc(&work->mm->mm_users);
 	kvm_get_kvm(work->vcpu->kvm);
 
 	/* this can't really happen otherwise gfn_to_pfn_async
@@ -180,7 +180,7 @@ int kvm_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
 	return 1;
 retry_sync:
 	kvm_put_kvm(work->vcpu->kvm);
-	mmdrop(work->mm);
+	mmput(work->mm);
 	kmem_cache_free(async_pf_cache, work);
 	return 0;
 }
-- 
1.9.1

[PATCH 3.13 114/160] ftrace/module: Hardcode ftrace_module_init() call into load_module()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit a949ae560a511fe4e3adf48fa44fefded93e5c2b upstream.

A race exists between module loading and enabling of function tracer.

	CPU 1				CPU 2
	-----				-----
  load_module()
   module->state = MODULE_STATE_COMING

				register_ftrace_function()
				 mutex_lock(&ftrace_lock);
				 ftrace_startup()
				  update_ftrace_function();
				   ftrace_arch_code_modify_prepare()
				    set_all_module_text_rw();
				   <enables-ftrace>
				    ftrace_arch_code_modify_post_process()
				     set_all_module_text_ro();

				[ here all module text is set to RO,
				  including the module that is
				  loading!! ]

   blocking_notifier_call_chain(MODULE_STATE_COMING);
    ftrace_init_module()

     [ tries to modify code, but it's RO, and fails!
       ftrace_bug() is called]

When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.

The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.

The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.

Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com

Reported-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 include/linux/ftrace.h |  2 ++
 kernel/module.c        |  3 +++
 kernel/trace/ftrace.c  | 27 ++++-----------------------
 3 files changed, 9 insertions(+), 23 deletions(-)

diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 31ea4b4..20e5093 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -524,6 +524,7 @@ static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_a
 extern int ftrace_arch_read_dyn_info(char *buf, int size);
 
 extern int skip_trace(unsigned long ip);
+extern void ftrace_module_init(struct module *mod);
 
 extern void ftrace_disable_daemon(void);
 extern void ftrace_enable_daemon(void);
@@ -533,6 +534,7 @@ static inline int ftrace_force_update(void) { return 0; }
 static inline void ftrace_disable_daemon(void) { }
 static inline void ftrace_enable_daemon(void) { }
 static inline void ftrace_release_mod(struct module *mod) {}
+static inline void ftrace_module_init(struct module *mod) {}
 static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
 {
 	return -EINVAL;
diff --git a/kernel/module.c b/kernel/module.c
index 6b931bd..6716a1f 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3262,6 +3262,9 @@ static int load_module(struct load_info *info, const char __user *uargs,
 
 	dynamic_debug_setup(info->debug, info->num_debug);
 
+	/* Ftrace init must be called in the MODULE_STATE_UNFORMED state */
+	ftrace_module_init(mod);
+
 	/* Finally it's fully formed, ready to start executing. */
 	err = complete_formation(mod, info);
 	if (err)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 38463d2..7db0614 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -4328,16 +4328,11 @@ static void ftrace_init_module(struct module *mod,
 	ftrace_process_locs(mod, start, end);
 }
 
-static int ftrace_module_notify_enter(struct notifier_block *self,
-				      unsigned long val, void *data)
+void ftrace_module_init(struct module *mod)
 {
-	struct module *mod = data;
-
-	if (val == MODULE_STATE_COMING)
-		ftrace_init_module(mod, mod->ftrace_callsites,
-				   mod->ftrace_callsites +
-				   mod->num_ftrace_callsites);
-	return 0;
+	ftrace_init_module(mod, mod->ftrace_callsites,
+			   mod->ftrace_callsites +
+			   mod->num_ftrace_callsites);
 }
 
 static int ftrace_module_notify_exit(struct notifier_block *self,
@@ -4351,11 +4346,6 @@ static int ftrace_module_notify_exit(struct notifier_block *self,
 	return 0;
 }
 #else
-static int ftrace_module_notify_enter(struct notifier_block *self,
-				      unsigned long val, void *data)
-{
-	return 0;
-}
 static int ftrace_module_notify_exit(struct notifier_block *self,
 				     unsigned long val, void *data)
 {
@@ -4363,11 +4353,6 @@ static int ftrace_module_notify_exit(struct notifier_block *self,
 }
 #endif /* CONFIG_MODULES */
 
-struct notifier_block ftrace_module_enter_nb = {
-	.notifier_call = ftrace_module_notify_enter,
-	.priority = INT_MAX,	/* Run before anything that can use kprobes */
-};
-
 struct notifier_block ftrace_module_exit_nb = {
 	.notifier_call = ftrace_module_notify_exit,
 	.priority = INT_MIN,	/* Run after anything that can remove kprobes */
@@ -4404,10 +4389,6 @@ void __init ftrace_init(void)
 				  __start_mcount_loc,
 				  __stop_mcount_loc);
 
-	ret = register_module_notifier(&ftrace_module_enter_nb);
-	if (ret)
-		pr_warning("Failed to register trace ftrace module enter notifier\n");
-
 	ret = register_module_notifier(&ftrace_module_exit_nb);
 	if (ret)
 		pr_warning("Failed to register trace ftrace module exit notifier\n");
-- 
1.9.1

[PATCH 3.13 115/160] [SCSI] mpt2sas: Don't disable device twice at suspend.

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tyler Stachecki <tstache1@binghamton.edu>

commit af61e27c3f77c7623b5335590ae24b6a5c323e22 upstream.

On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which
in turn calls pci_disable_device if the device is enabled prior to
suspending. However, _scsih_suspend also calls pci_disable_device
itself.

Thus, in the event that the device is enabled prior to suspending,
pci_disable_device will be called twice. This patch removes the
duplicate call to pci_disable_device in _scsi_suspend as it is both
unnecessary and results in a kernel oops.

Signed-off-by: Tyler Stachecki <tstache1@binghamton.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 7f0af4f..6fd7d40 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -8293,7 +8293,6 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	mpt2sas_base_free_resources(ioc);
 	pci_save_state(pdev);
-	pci_disable_device(pdev);
 	pci_set_power_state(pdev, device_state);
 	return 0;
 }
-- 
1.9.1

[PATCH 3.13 116/160] [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fam Zheng <famz@redhat.com>

commit 0c8482ac92db5ac15792caf23b7f7df9e4f48ae1 upstream.

virtscsi_init calls virtscsi_remove_vqs on err, even before initializing
the vqs. The latter calls virtscsi_set_affinity, so let's check the
pointer there before setting affinity on it.

This fixes a panic when setting device's num_queues=2 on RHEL 6.5:

qemu-system-x86_64 ... \
-device virtio-scsi-pci,id=scsi0,addr=0x13,...,num_queues=2 \
-drive file=/stor/vm/dummy.raw,id=drive-scsi-disk,... \
-device scsi-hd,drive=drive-scsi-disk,...

[    0.354734] scsi0 : Virtio SCSI HBA
[    0.379504] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[    0.380141] IP: [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120
[    0.380141] PGD 0
[    0.380141] Oops: 0000 [#1] SMP
[    0.380141] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #5
[    0.380141] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
[    0.380141] task: ffff88003c9f0000 ti: ffff88003c9f8000 task.ti: ffff88003c9f8000
[    0.380141] RIP: 0010:[<ffffffff814741ef>]  [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120
[    0.380141] RSP: 0000:ffff88003c9f9c08  EFLAGS: 00010256
[    0.380141] RAX: 0000000000000000 RBX: ffff88003c3a9d40 RCX: 0000000000001070
[    0.380141] RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000
[    0.380141] RBP: ffff88003c9f9c28 R08: 00000000000136c0 R09: ffff88003c801c00
[    0.380141] R10: ffffffff81475229 R11: 0000000000000008 R12: 0000000000000000
[    0.380141] R13: ffffffff81cc7ca8 R14: ffff88003cac3d40 R15: ffff88003cac37a0
[    0.380141] FS:  0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000
[    0.380141] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    0.380141] CR2: 0000000000000020 CR3: 0000000001c0e000 CR4: 00000000000006f0
[    0.380141] Stack:
[    0.380141]  ffff88003c3a9d40 0000000000000000 ffff88003cac3d80 ffff88003cac3d40
[    0.380141]  ffff88003c9f9c48 ffffffff814742e8 ffff88003c26d000 ffff88003c26d000
[    0.380141]  ffff88003c9f9c68 ffffffff81474321 ffff88003c26d000 ffff88003c3a9d40
[    0.380141] Call Trace:
[    0.380141]  [<ffffffff814742e8>] virtscsi_set_affinity+0x28/0x40
[    0.380141]  [<ffffffff81474321>] virtscsi_remove_vqs+0x21/0x50
[    0.380141]  [<ffffffff81475231>] virtscsi_init+0x91/0x240
[    0.380141]  [<ffffffff81365290>] ? vp_get+0x50/0x70
[    0.380141]  [<ffffffff81475544>] virtscsi_probe+0xf4/0x280
[    0.380141]  [<ffffffff81363ea5>] virtio_dev_probe+0xe5/0x140
[    0.380141]  [<ffffffff8144c669>] driver_probe_device+0x89/0x230
[    0.380141]  [<ffffffff8144c8ab>] __driver_attach+0x9b/0xa0
[    0.380141]  [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230
[    0.380141]  [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230
[    0.380141]  [<ffffffff8144ac1c>] bus_for_each_dev+0x8c/0xb0
[    0.380141]  [<ffffffff8144c499>] driver_attach+0x19/0x20
[    0.380141]  [<ffffffff8144bf28>] bus_add_driver+0x198/0x220
[    0.380141]  [<ffffffff8144ce9f>] driver_register+0x5f/0xf0
[    0.380141]  [<ffffffff81d27c91>] ? spi_transport_init+0x79/0x79
[    0.380141]  [<ffffffff8136403b>] register_virtio_driver+0x1b/0x30
[    0.380141]  [<ffffffff81d27d19>] init+0x88/0xd6
[    0.380141]  [<ffffffff81d27c18>] ? scsi_init_procfs+0x5b/0x5b
[    0.380141]  [<ffffffff81ce88a7>] do_one_initcall+0x7f/0x10a
[    0.380141]  [<ffffffff81ce8aa7>] kernel_init_freeable+0x14a/0x1de
[    0.380141]  [<ffffffff81ce8b3b>] ? kernel_init_freeable+0x1de/0x1de
[    0.380141]  [<ffffffff817dec20>] ? rest_init+0x80/0x80
[    0.380141]  [<ffffffff817dec29>] kernel_init+0x9/0xf0
[    0.380141]  [<ffffffff817e68fc>] ret_from_fork+0x7c/0xb0
[    0.380141]  [<ffffffff817dec20>] ? rest_init+0x80/0x80
[    0.380141] RIP  [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120
[    0.380141]  RSP <ffff88003c9f9c08>
[    0.380141] CR2: 0000000000000020
[    0.380141] ---[ end trace 8074b70c3d5e1d73 ]---
[    0.475018] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    0.475018]
[    0.475068] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
[    0.475068] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009

[jejb: checkpatch fixes]
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/scsi/virtio_scsi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 16bfd50..db3b494 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -750,8 +750,12 @@ static void __virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity)
 
 		vscsi->affinity_hint_set = true;
 	} else {
-		for (i = 0; i < vscsi->num_queues; i++)
+		for (i = 0; i < vscsi->num_queues; i++) {
+			if (!vscsi->req_vqs[i].vq)
+				continue;
+
 			virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1);
+		}
 
 		vscsi->affinity_hint_set = false;
 	}
-- 
1.9.1

[PATCH 3.13 117/160] drivercore: deferral race condition fix

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grant Likely <grant.likely@linaro.org>

commit 58b116bce13612e5aa6fcd49ecbd4cf8bb59e835 upstream.

When the kernel is built with CONFIG_PREEMPT it is possible to reach a state
when all modules loaded but some driver still stuck in the deferred list
and there is a need for external event to kick the deferred queue to probe
these drivers.

The issue has been observed on embedded systems with CONFIG_PREEMPT enabled,
audio support built as modules and using nfsroot for root filesystem.

The following log fragment shows such sequence when all audio modules
were loaded but the sound card is not present since the machine driver has
failed to probe due to missing dependency during it's probe.
The board is am335x-evmsk (McASP<->tlv320aic3106 codec) with davinci-evm
machine driver:

...
[   12.615118] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: ENTER
[   12.719969] davinci_evm sound.3: davinci_evm_probe: ENTER
[   12.725753] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card
[   12.753846] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component
[   12.922051] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component DONE
[   12.950839] davinci_evm sound.3: ASoC: platform (null) not registered
[   12.957898] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card DONE (-517)
[   13.099026] davinci-mcasp 4803c000.mcasp: Kicking the deferred list
[   13.177838] davinci-mcasp 4803c000.mcasp: really_probe: probe_count = 2
[   13.194130] davinci_evm sound.3: snd_soc_register_card failed (-517)
[   13.346755] davinci_mcasp_driver_init: LEAVE
[   13.377446] platform sound.3: Driver davinci_evm requests probe deferral
[   13.592527] platform sound.3: really_probe: probe_count = 0

In the log the machine driver enters it's probe at 12.719969 (this point it
has been removed from the deferred lists). McASP driver already executing
it's probing (since 12.615118).
The machine driver tries to construct the sound card (12.950839) but did
not found one of the components so it fails. After this McASP driver
registers all the ASoC components (the machine driver still in it's probe
function after it failed to construct the card) and the deferred work is
prepared at 13.099026 (note that this time the machine driver is not in the
lists so it is not going to be handled when the work is executing).
Lastly the machine driver exit from it's probe and the core places it to
the deferred list but there will be no other driver going to load and the
deferred queue is not going to be kicked again - till we have external event
like connecting USB stick, etc.

The proposed solution is to try the deferred queue once more when the last
driver is asking for deferring and we had drivers loaded while this last
driver was probing.

This way we can avoid drivers stuck in the deferred queue.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/base/dd.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 0605176..8a8d611 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -52,6 +52,7 @@ static DEFINE_MUTEX(deferred_probe_mutex);
 static LIST_HEAD(deferred_probe_pending_list);
 static LIST_HEAD(deferred_probe_active_list);
 static struct workqueue_struct *deferred_wq;
+static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
 
 /**
  * deferred_probe_work_func() - Retry probing devices in the active list.
@@ -135,6 +136,17 @@ static bool driver_deferred_probe_enable = false;
  * This functions moves all devices from the pending list to the active
  * list and schedules the deferred probe workqueue to process them.  It
  * should be called anytime a driver is successfully bound to a device.
+ *
+ * Note, there is a race condition in multi-threaded probe. In the case where
+ * more than one device is probing at the same time, it is possible for one
+ * probe to complete successfully while another is about to defer. If the second
+ * depends on the first, then it will get put on the pending list after the
+ * trigger event has already occured and will be stuck there.
+ *
+ * The atomic 'deferred_trigger_count' is used to determine if a successful
+ * trigger has occurred in the midst of probing a driver. If the trigger count
+ * changes in the midst of a probe, then deferred processing should be triggered
+ * again.
  */
 static void driver_deferred_probe_trigger(void)
 {
@@ -147,6 +159,7 @@ static void driver_deferred_probe_trigger(void)
 	 * into the active list so they can be retried by the workqueue
 	 */
 	mutex_lock(&deferred_probe_mutex);
+	atomic_inc(&deferred_trigger_count);
 	list_splice_tail_init(&deferred_probe_pending_list,
 			      &deferred_probe_active_list);
 	mutex_unlock(&deferred_probe_mutex);
@@ -265,6 +278,7 @@ static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
 static int really_probe(struct device *dev, struct device_driver *drv)
 {
 	int ret = 0;
+	int local_trigger_count = atomic_read(&deferred_trigger_count);
 
 	atomic_inc(&probe_count);
 	pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
@@ -310,6 +324,9 @@ probe_failed:
 		/* Driver requested deferred probing */
 		dev_info(dev, "Driver %s requests probe deferral\n", drv->name);
 		driver_deferred_probe_add(dev);
+		/* Did a trigger occur while probing? Need to re-trigger if yes */
+		if (local_trigger_count != atomic_read(&deferred_trigger_count))
+			driver_deferred_probe_trigger();
 	} else if (ret != -ENODEV && ret != -ENXIO) {
 		/* driver matched but the probe failed */
 		printk(KERN_WARNING
-- 
1.9.1

[PATCH 3.13 118/160] hrtimer: Prevent all reprogramming if hang detected

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stuart Hayes <stuart.w.hayes@gmail.com>

commit 6c6c0d5a1c949d2e084706f9e5fb1fccc175b265 upstream.

If the last hrtimer interrupt detected a hang it sets hang_detected=1
and programs the clock event device with a delay to let the system
make progress.

If hang_detected == 1, we prevent reprogramming of the clock event
device in hrtimer_reprogram() but not in hrtimer_force_reprogram().

This can lead to the following situation:

hrtimer_interrupt()
   hang_detected = 1;
   program ce device to Xms from now (hang delay)

We have two timers pending:
   T1 expires 50ms from now
   T2 expires 5s from now

Now T1 gets canceled, which causes hrtimer_force_reprogram() to be
invoked, which in turn programs the clock event device to T2 (5
seconds from now).

Any hrtimer_start after that will not reprogram the hardware due to
hang_detected still being set. So we effectivly block all timers until
the T2 event fires and cleans up the hang situation.

Add a check for hang_detected to hrtimer_force_reprogram() which
prevents the reprogramming of the hang delay in the hardware
timer. The subsequent hrtimer_interrupt will resolve all outstanding
issues.

[ tglx: Rewrote subject and changelog and fixed up the comment in
  	hrtimer_force_reprogram() ]

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: http://lkml.kernel.org/r/53602DC6.2060101@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 kernel/hrtimer.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 383319b..0d6df7b 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -581,6 +581,23 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
 
 	cpu_base->expires_next.tv64 = expires_next.tv64;
 
+	/*
+	 * If a hang was detected in the last timer interrupt then we
+	 * leave the hang delay active in the hardware. We want the
+	 * system to make progress. That also prevents the following
+	 * scenario:
+	 * T1 expires 50ms from now
+	 * T2 expires 5s from now
+	 *
+	 * T1 is removed, so this code is called and would reprogram
+	 * the hardware to 5s from now. Any hrtimer_start after that
+	 * will not reprogram the hardware due to hang_detected being
+	 * set. So we'd effectivly block all timers until the T2 event
+	 * fires.
+	 */
+	if (cpu_base->hang_detected)
+		return;
+
 	if (cpu_base->expires_next.tv64 != KTIME_MAX)
 		tick_program_event(cpu_base->expires_next, 1);
 }
-- 
1.9.1

[PATCH 3.13 119/160] hrtimer: Prevent remote enqueue of leftmost timers

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Ma <xindong.ma@intel.com>

commit 012a45e3f4af68e86d85cce060c6c2fed56498b2 upstream.

If a cpu is idle and starts an hrtimer which is not pinned on that
same cpu, the nohz code might target the timer to a different cpu.

In the case that we switch the cpu base of the timer we already have a
sanity check in place, which determines whether the timer is earlier
than the current leftmost timer on the target cpu. In that case we
enqueue the timer on the current cpu because we cannot reprogram the
clock event device on the target.

If the timers base is already the target CPU we do not have this
sanity check in place so we enqueue the timer as the leftmost timer in
the target cpus rb tree, but we cannot reprogram the clock event
device on the target cpu. So the timer expires late and subsequently
prevents the reprogramming of the target cpu clock event device until
the previously programmed event fires or a timer with an earlier
expiry time gets enqueued on the target cpu itself.

Add the same target check as we have for the switch base case and
start the timer on the current cpu if it would become the leftmost
timer on the target.

[ tglx: Rewrote subject and changelog ]

Signed-off-by: Leon Ma <xindong.ma@intel.com>
Link: http://lkml.kernel.org/r/1398847391-5994-1-git-send-email-xindong.ma@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 kernel/hrtimer.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 0d6df7b..6de65d8 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -246,6 +246,11 @@ again:
 			goto again;
 		}
 		timer->base = new_base;
+	} else {
+		if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
+			cpu = this_cpu;
+			goto again;
+		}
 	}
 	return new_base;
 }
-- 
1.9.1

[PATCH 3.13 120/160] timer: Prevent overflow in apply_slack

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Bohac <jbohac@suse.cz>

commit 98a01e779f3c66b0b11cd7e64d531c0e41c95762 upstream.

On architectures with sizeof(int) < sizeof (long), the
computation of mask inside apply_slack() can be undefined if the
computed bit is > 32.

E.g. with: expires = 0xffffe6f5 and slack = 25, we get:

expires_limit = 0x20000000e
bit = 33
mask = (1 << 33) - 1  /* undefined */

On x86, mask becomes 1 and and the slack is not applied properly.
On s390, mask is -1, expires is set to 0 and the timer fires immediately.

Use 1UL << bit to solve that issue.

Suggested-by: Deborah Townsend <dstownse@us.ibm.com>
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 kernel/timer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/timer.c b/kernel/timer.c
index accfd24..38f0d40 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -822,7 +822,7 @@ unsigned long apply_slack(struct timer_list *timer, unsigned long expires)
 
 	bit = find_last_bit(&mask, BITS_PER_LONG);
 
-	mask = (1 << bit) - 1;
+	mask = (1UL << bit) - 1;
 
 	expires_limit = expires_limit & ~(mask);
 
-- 
1.9.1

[PATCH 3.13 121/160] ARC: !PREEMPT: Ensure Return to kernel mode is IRQ safe

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vineet Gupta <Vineet.Gupta1@synopsys.com>

commit 8aa9e85adac609588eeec356e5a85059b3b819ba upstream.

There was a very small race window where resume to kernel mode from a
Exception Path (or pure kernel mode which is true for most of ARC
exceptions anyways), was not disabling interrupts in restore_regs,
clobbering the exception regs

Anton found the culprit call flow (after many sleepless nights)

| 1. we got a Trap from user land
| 2. started to service it.
| 3. While doing some stuff on user-land memory (I think it is padzero()),
|     we got a DataTlbMiss
| 4. On return from it we are taking "resume_kernel_mode" path
| 5. NEED_RESHED is not set, so we go to "return from exception" path in
|     restore regs.
| 6. there seems to be IRQ happening

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arc/kernel/entry.S | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 47d09d0..6e8f83a 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -614,11 +614,13 @@ resume_user_mode_begin:
 
 resume_kernel_mode:
 
-#ifdef CONFIG_PREEMPT
-
-	; This is a must for preempt_schedule_irq()
+	; Disable Interrupts from this point on
+	; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
 	IRQ_DISABLE	r9
 
+#ifdef CONFIG_PREEMPT
+
 	; Can't preempt if preemption disabled
 	GET_CURR_THR_INFO_FROM_SP   r10
 	ld  r8, [r10, THREAD_INFO_PREEMPT_COUNT]
-- 
1.9.1

[PATCH 3.13 122/160] aio: fix potential leak in aio_run_iocb().

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Yu <chianglungyu@gmail.com>

commit 754320d6e166d3a12cb4810a452bde00afbd4e9a upstream.

iovec should be reclaimed whenever caller of rw_copy_check_uvector() returns,
but it doesn't hold when failure happens right after aio_setup_vectored_rw().

Fix that in a such way to avoid hairy goto.

Signed-off-by: Leon Yu <chianglungyu@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/aio.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index 12a3de0e..04cd768 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1299,10 +1299,8 @@ rw_common:
 						&iovec, compat)
 			: aio_setup_single_vector(req, rw, buf, &nr_segs,
 						  iovec);
-		if (ret)
-			return ret;
-
-		ret = rw_verify_area(rw, file, &req->ki_pos, req->ki_nbytes);
+		if (!ret)
+			ret = rw_verify_area(rw, file, &req->ki_pos, req->ki_nbytes);
 		if (ret < 0) {
 			if (iovec != &inline_vec)
 				kfree(iovec);
-- 
1.9.1

[PATCH 3.13 123/160] dm cache: fix writethrough mode quiescing in cache_map

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit 131cd131a9ff63d4b84f3fe15073a2984ac30066 upstream.

Commit 2ee57d58735 ("dm cache: add passthrough mode") inadvertently
removed the deferred set reference that was taken in cache_map()'s
writethrough mode support.  Restore taking this reference.

This issue was found with code inspection.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/md/dm-cache-target.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index 0826650..1d30f65 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -2495,6 +2495,7 @@ static int cache_map(struct dm_target *ti, struct bio *bio)
 
 		} else {
 			inc_hit_counter(cache, bio);
+			pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
 
 			if (bio_data_dir(bio) == WRITE && writethrough_mode(&cache->features) &&
 			    !is_dirty(cache, lookup_result.cblock))
-- 
1.9.1

[PATCH 3.13 124/160] fix races between __d_instantiate() and checks of dentry flags

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 22213318af7ae265bc6cd8aef2febbc2d69a2440 upstream.

in non-lazy walk we need to be careful about dentry switching from
negative to positive - both ->d_flags and ->d_inode are updated,
and in some places we might see only one store.  The cases where
dentry has been obtained by dcache lookup with ->i_mutex held on
parent are safe - ->d_lock and ->i_mutex provide all the barriers
we need.  However, there are several places where we run into
trouble:
	* do_last() fetches ->d_inode, then checks ->d_flags and
assumes that inode won't be NULL unless d_is_negative() is true.
Race with e.g. creat() - we might have fetched the old value of
->d_inode (still NULL) and new value of ->d_flags (already not
DCACHE_MISS_TYPE).  Lin Ming has observed and reported the resulting
oops.
	* a bunch of places checks ->d_inode for being non-NULL,
then checks ->d_flags for "is it a symlink".  Race with symlink(2)
in case if our CPU sees ->d_inode update first - we see non-NULL
there, but ->d_flags still contains DCACHE_MISS_TYPE instead of
DCACHE_SYMLINK_TYPE.  Result: false negative on "should we follow
link here?", with subsequent unpleasantness.

Reported-and-tested-by: Lin Ming <minggr@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/dcache.c | 3 +--
 fs/namei.c  | 6 +++---
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index ca02c13..7f3b400 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1647,8 +1647,7 @@ static void __d_instantiate(struct dentry *dentry, struct inode *inode)
 	unsigned add_flags = d_flags_for_inode(inode);
 
 	spin_lock(&dentry->d_lock);
-	dentry->d_flags &= ~DCACHE_ENTRY_TYPE;
-	dentry->d_flags |= add_flags;
+	__d_set_type(dentry, add_flags);
 	if (inode)
 		hlist_add_head(&dentry->d_alias, &inode->i_dentry);
 	dentry->d_inode = inode;
diff --git a/fs/namei.c b/fs/namei.c
index 399f637..3a1ea70a 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1526,7 +1526,7 @@ static inline int walk_component(struct nameidata *nd, struct path *path,
 		inode = path->dentry->d_inode;
 	}
 	err = -ENOENT;
-	if (!inode)
+	if (!inode || d_is_negative(path->dentry))
 		goto out_path_put;
 
 	if (should_follow_link(path->dentry, follow)) {
@@ -2229,7 +2229,7 @@ mountpoint_last(struct nameidata *nd, struct path *path)
 	mutex_unlock(&dir->d_inode->i_mutex);
 
 done:
-	if (!dentry->d_inode) {
+	if (!dentry->d_inode || d_is_negative(dentry)) {
 		error = -ENOENT;
 		dput(dentry);
 		goto out;
@@ -2971,7 +2971,7 @@ retry_lookup:
 finish_lookup:
 	/* we _can_ be in RCU mode here */
 	error = -ENOENT;
-	if (d_is_negative(path->dentry)) {
+	if (!inode || d_is_negative(path->dentry)) {
 		path_to_nameidata(path, nd);
 		goto out;
 	}
-- 
1.9.1

[PATCH 3.13 125/160] net: Fix ns_capable check in sock_diag_put_filterinfo

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lutomirski <luto@amacapital.net>

commit 78541c1dc60b65ecfce5a6a096fc260219d6784e upstream.

The caller needs capabilities on the namespace being queried, not on
their own namespace.  This is a security bug, although it likely has
only a minor impact.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 include/linux/sock_diag.h | 2 +-
 net/core/sock_diag.c      | 4 ++--
 net/packet/diag.c         | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
index 54f91d3..302ab80 100644
--- a/include/linux/sock_diag.h
+++ b/include/linux/sock_diag.h
@@ -23,7 +23,7 @@ int sock_diag_check_cookie(void *sk, __u32 *cookie);
 void sock_diag_save_cookie(void *sk, __u32 *cookie);
 
 int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
-int sock_diag_put_filterinfo(struct user_namespace *user_ns, struct sock *sk,
+int sock_diag_put_filterinfo(struct sock *sk,
 			     struct sk_buff *skb, int attrtype);
 
 #endif
diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c
index a0e9cf6..6a7fae2 100644
--- a/net/core/sock_diag.c
+++ b/net/core/sock_diag.c
@@ -49,7 +49,7 @@ int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attrtype)
 }
 EXPORT_SYMBOL_GPL(sock_diag_put_meminfo);
 
-int sock_diag_put_filterinfo(struct user_namespace *user_ns, struct sock *sk,
+int sock_diag_put_filterinfo(struct sock *sk,
 			     struct sk_buff *skb, int attrtype)
 {
 	struct nlattr *attr;
@@ -57,7 +57,7 @@ int sock_diag_put_filterinfo(struct user_namespace *user_ns, struct sock *sk,
 	unsigned int len;
 	int err = 0;
 
-	if (!ns_capable(user_ns, CAP_NET_ADMIN)) {
+	if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)) {
 		nla_reserve(skb, attrtype, 0);
 		return 0;
 	}
diff --git a/net/packet/diag.c b/net/packet/diag.c
index a9584a2..ec8b6e8 100644
--- a/net/packet/diag.c
+++ b/net/packet/diag.c
@@ -171,7 +171,7 @@ static int sk_diag_fill(struct sock *sk, struct sk_buff *skb,
 		goto out_nlmsg_trim;
 
 	if ((req->pdiag_show & PACKET_SHOW_FILTER) &&
-	    sock_diag_put_filterinfo(user_ns, sk, skb, PACKET_DIAG_FILTER))
+	    sock_diag_put_filterinfo(sk, skb, PACKET_DIAG_FILTER))
 		goto out_nlmsg_trim;
 
 	return nlmsg_end(skb, nlh);
-- 
1.9.1

[PATCH 3.13 126/160] rt2x00: fix beaconing on USB

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 8834d3608cc516f13e2e510f4057c263f3d2ce42 upstream.

When disable beaconing we clear register with beacon and newer set it
back, what make we stop send beacons infinitely.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/rt2x00/rt2x00mac.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 2183e79..b4e94ae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -623,20 +623,18 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 				      bss_conf->bssid);
 
 	/*
-	 * Update the beacon. This is only required on USB devices. PCI
-	 * devices fetch beacons periodically.
-	 */
-	if (changes & BSS_CHANGED_BEACON && rt2x00_is_usb(rt2x00dev))
-		rt2x00queue_update_beacon(rt2x00dev, vif);
-
-	/*
 	 * Start/stop beaconing.
 	 */
 	if (changes & BSS_CHANGED_BEACON_ENABLED) {
 		if (!bss_conf->enable_beacon && intf->enable_beacon) {
-			rt2x00queue_clear_beacon(rt2x00dev, vif);
 			rt2x00dev->intf_beaconing--;
 			intf->enable_beacon = false;
+			/*
+			 * Clear beacon in the H/W for this vif. This is needed
+			 * to disable beaconing on this particular interface
+			 * and keep it running on other interfaces.
+			 */
+			rt2x00queue_clear_beacon(rt2x00dev, vif);
 
 			if (rt2x00dev->intf_beaconing == 0) {
 				/*
@@ -647,11 +645,15 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 				rt2x00queue_stop_queue(rt2x00dev->bcn);
 				mutex_unlock(&intf->beacon_skb_mutex);
 			}
-
-
 		} else if (bss_conf->enable_beacon && !intf->enable_beacon) {
 			rt2x00dev->intf_beaconing++;
 			intf->enable_beacon = true;
+			/*
+			 * Upload beacon to the H/W. This is only required on
+			 * USB devices. PCI devices fetch beacons periodically.
+			 */
+			if (rt2x00_is_usb(rt2x00dev))
+				rt2x00queue_update_beacon(rt2x00dev, vif);
 
 			if (rt2x00dev->intf_beaconing == 1) {
 				/*
-- 
1.9.1

[PATCH 3.13 127/160] rtlwifi: rtl8188ee: initialize packet_beacon

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit 328e203fc35f0b4f6df1c4943f74cf553bcc04f8 upstream.

static code analysis from cppcheck reports:

[drivers/net/wireless/rtlwifi/rtl8188ee/trx.c:322]:
  (error) Uninitialized variable: packet_beacon

packet_beacon is not initialized and hence packet_beacon
contains garbage from the stack, so set it to false.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/rtlwifi/rtl8188ee/trx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
index aece6c9..7622e44 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
@@ -293,7 +293,7 @@ static void _rtl88ee_translate_rx_signal_stuff(struct ieee80211_hw *hw,
 	u8 *psaddr;
 	__le16 fc;
 	u16 type, ufc;
-	bool match_bssid, packet_toself, packet_beacon, addr;
+	bool match_bssid, packet_toself, packet_beacon = false, addr;
 
 	tmp_buf = skb->data + pstatus->rx_drvinfo_size + pstatus->rx_bufshift;
 
-- 
1.9.1

[PATCH 3.13 128/160] Input: synaptics - add min/max quirk for ThinkPad Edge E431

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 27a38856a948c3e8de30dc71647ff9e1778c99fc upstream.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/input/mouse/synaptics.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 5048210..3c511c4 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1515,6 +1515,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = {
 		.driver_data = (int []){1232, 5710, 1156, 4696},
 	},
 	{
+		/* Lenovo ThinkPad Edge E431 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Edge E431"),
+		},
+		.driver_data = (int []){1024, 5022, 2508, 4832},
+	},
+	{
 		/* Lenovo ThinkPad T431s */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-- 
1.9.1

[PATCH 3.13 129/160] Input: atkbd - fix keyboard not working on some LG laptops

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sheng-Liang Song <ssl@chromium.org>

commit 3d725caa9dcc78c3dc9e7ea0c04f626468edd9c9 upstream.

After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops
working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands.

In order to keep changes in atkbd driver to the minimum we check DMI
signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG
LW25-B7HV or P1-J273B.

Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/input/keyboard/atkbd.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 2626773..2dd1d0d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -243,6 +243,12 @@ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
 static void *atkbd_platform_fixup_data;
 static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
 
+/*
+ * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding
+ * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed.
+ */
+static bool atkbd_skip_deactivate;
+
 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
 				ssize_t (*handler)(struct atkbd *, char *));
 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
@@ -768,7 +774,8 @@ static int atkbd_probe(struct atkbd *atkbd)
  * Make sure nothing is coming from the keyboard and disturbs our
  * internal state.
  */
-	atkbd_deactivate(atkbd);
+	if (!atkbd_skip_deactivate)
+		atkbd_deactivate(atkbd);
 
 	return 0;
 }
@@ -1638,6 +1645,12 @@ static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
 	return 1;
 }
 
+static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
+{
+	atkbd_skip_deactivate = true;
+	return 1;
+}
+
 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 	{
 		.matches = {
@@ -1775,6 +1788,20 @@ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 		.callback = atkbd_setup_scancode_fixup,
 		.driver_data = atkbd_oqo_01plus_scancode_fixup,
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LW25-B7HV"),
+		},
+		.callback = atkbd_deactivate_fixup,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P1-J273B"),
+		},
+		.callback = atkbd_deactivate_fixup,
+	},
 	{ }
 };
 
-- 
1.9.1

[PATCH 3.13 130/160] Bluetooth: Fix triggering BR/EDR L2CAP Connect too early

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hedberg <johan.hedberg@intel.com>

commit 9eb1fbfa0a737fd4d3a6d12d71c5ea9af622b887 upstream.

Commit 1c2e004183178 introduced an event handler for the encryption key
refresh complete event with the intent of fixing some LE/SMP cases.
However, this event is shared with BR/EDR and there we actually want to
act only on the auth_complete event (which comes after the key refresh).

If we do not do this we may trigger an L2CAP Connect Request too early
and cause the remote side to return a security block error.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 net/bluetooth/hci_event.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 75d34d1..e70a426 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3012,6 +3012,12 @@ static void hci_key_refresh_complete_evt(struct hci_dev *hdev,
 	if (!conn)
 		goto unlock;
 
+	/* For BR/EDR the necessary steps are taken through the
+	 * auth_complete event.
+	 */
+	if (conn->type != LE_LINK)
+		goto unlock;
+
 	if (!ev->status)
 		conn->sec_level = conn->pending_sec_level;
 
-- 
1.9.1

[PATCH 3.13 131/160] Bluetooth: Fix redundant encryption request for reauthentication

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hedberg <johan.hedberg@intel.com>

commit 09da1f3463eb81d59685df723b1c5950b7570340 upstream.

When we're performing reauthentication (in order to elevate the
security level from an unauthenticated key to an authenticated one) we
do not need to issue any encryption command once authentication
completes. Since the trigger for the encryption HCI command is the
ENCRYPT_PEND flag this flag should not be set in this scenario.
Instead, the REAUTH_PEND flag takes care of all necessary steps for
reauthentication.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 net/bluetooth/hci_conn.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ba5366c..9a6bc9d 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -752,14 +752,17 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
 	if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
 		struct hci_cp_auth_requested cp;
 
-		/* encrypt must be pending if auth is also pending */
-		set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
-
 		cp.handle = cpu_to_le16(conn->handle);
 		hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
 			     sizeof(cp), &cp);
+
+		/* If we're already encrypted set the REAUTH_PEND flag,
+		 * otherwise set the ENCRYPT_PEND.
+		 */
 		if (conn->key_type != 0xff)
 			set_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
+		else
+			set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
 	}
 
 	return 0;
-- 
1.9.1

[PATCH 3.13 132/160] drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Egbert Eich <eich@suse.de>

commit 7f1950fbb989e8fc5463b307e062b4529d51c862 upstream.

Depending on the SDVO output_flags SDVO may have multiple connectors
linking to the same encoder (in intel_connector->encoder->base).
Only one of those connectors should be active (ie link to the encoder
thru drm_connector->encoder).
If intel_connector_break_all_links() is called from intel_sanitize_crtc()
we may break the crtc connection of an encoder thru an inactive connector
in which case intel_connector_break_all_links() will not be called again
for the active connector if this happens to come later in the list due to:
    if (connector->encoder->base.crtc != &crtc->base)
                                 continue;
in intel_sanitize_crtc().
This will however leave the drm_connector->encoder linkage for this
active connector in place. Subsequently this will cause multiple
warnings in intel_connector_check_state() to trigger and the driver
will eventually die in drm_encoder_crtc_ok() (because of crtc == NULL).

To avoid this remove intel_connector_break_all_links() and move its
code to its two calling functions: intel_sanitize_crtc() and
intel_sanitize_encoder().
This allows to implement the link breaking more flexibly matching
the surrounding code: ie. in intel_sanitize_crtc() we can break the
crtc link separatly after the links to the encoders have been
broken which avoids above problem.

This regression has been introduced in:

commit 24929352481f085c5f85d4d4cbc919ddf106d381
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Jul 2 20:28:59 2012 +0200

    drm/i915: read out the modeset hw state at load and resume time

so goes back to the very beginning of the modeset rework.

v2: This patch takes care of the concernes voiced by Chris Wilson
and Daniel Vetter that only breaking links if the drm_connector
is linked to an encoder may miss some links.
v3: move all encoder handling to encoder loop as suggested by
Daniel Vetter.

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 10315b0..4a82251 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10715,15 +10715,6 @@ void intel_modeset_init(struct drm_device *dev)
 	intel_disable_fbc(dev);
 }
 
-static void
-intel_connector_break_all_links(struct intel_connector *connector)
-{
-	connector->base.dpms = DRM_MODE_DPMS_OFF;
-	connector->base.encoder = NULL;
-	connector->encoder->connectors_active = false;
-	connector->encoder->base.crtc = NULL;
-}
-
 static void intel_enable_pipe_a(struct drm_device *dev)
 {
 	struct intel_connector *connector;
@@ -10805,8 +10796,17 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 			if (connector->encoder->base.crtc != &crtc->base)
 				continue;
 
-			intel_connector_break_all_links(connector);
+			connector->base.dpms = DRM_MODE_DPMS_OFF;
+			connector->base.encoder = NULL;
 		}
+		/* multiple connectors may have the same encoder:
+		 *  handle them and break crtc link separately */
+		list_for_each_entry(connector, &dev->mode_config.connector_list,
+				    base.head)
+			if (connector->encoder->base.crtc == &crtc->base) {
+				connector->encoder->base.crtc = NULL;
+				connector->encoder->connectors_active = false;
+			}
 
 		WARN_ON(crtc->active);
 		crtc->base.enabled = false;
@@ -10877,6 +10877,8 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
 				      drm_get_encoder_name(&encoder->base));
 			encoder->disable(encoder);
 		}
+		encoder->base.crtc = NULL;
+		encoder->connectors_active = false;
 
 		/* Inconsistent output/port/pipe state happens presumably due to
 		 * a bug in one of the get_hw_state functions. Or someplace else
@@ -10887,8 +10889,8 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
 				    base.head) {
 			if (connector->encoder != encoder)
 				continue;
-
-			intel_connector_break_all_links(connector);
+			connector->base.dpms = DRM_MODE_DPMS_OFF;
+			connector->base.encoder = NULL;
 		}
 	}
 	/* Enabled encoders without active connectors will be fixed in
-- 
1.9.1

[PATCH 3.13 133/160] iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Atilla Filiz <atilla.filiz@essensium.com>

commit b9b3a41893c3f1be67b5aacfa525969914bea0e9 upstream.

The driver segfaults when the kernel boots with device tree as the
platform data is then not present and the pointer is deferenced without
checking it is not null.  This patch introduces such a check avoiding the
crash.

Signed-off-by: Atilla Filiz <atilla.filiz@essensium.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index df7f1e1..27a9176 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -661,6 +661,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 {
 	struct inv_mpu6050_state *st;
 	struct iio_dev *indio_dev;
+	struct inv_mpu6050_platform_data *pdata;
 	int result;
 
 	if (!i2c_check_functionality(client->adapter,
@@ -673,8 +674,10 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 	st->client = client;
-	st->plat_data = *(struct inv_mpu6050_platform_data
-				*)dev_get_platdata(&client->dev);
+	pdata = (struct inv_mpu6050_platform_data
+			*)dev_get_platdata(&client->dev);
+	if (pdata)
+		st->plat_data = *pdata;
 	/* power is turned on inside check chip type*/
 	result = inv_check_and_setup_chip(st, id);
 	if (result)
-- 
1.9.1

[PATCH 3.13 134/160] ALSA: hda - add headset mic detect quirk for a Dell laptop

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit 91943954e353fa56cc52a8e97346205afb9823ab upstream.

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x1028067e), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index cee8c88..bfc69e2 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4410,6 +4410,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x0662, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0667, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0674, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1028, 0x067e, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
-- 
1.9.1

[PATCH 3.13 135/160] rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbb

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 5f9186990ec4579ee5b7a99b3254c29eda479f36 upstream.

Beginning with kernel 3.13, this driver fails on some systems. The problem
was bisected to:

Commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac
Author: Felix Fietkau <nbd@openwrt.org>
Title: mac80211: send control port protocol frames to the VO queue

There is noting wrong with the above commit. The regression occurs because
V0 queue on RTL8192SE cards uses priority 6, not the usual 7. The fix is to
modify the rtl8192se routine that sets the correct transmit queue.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=74541

Reported-by: Alex Miller <almiller_1@yahoo.co.uk>
Tested-by: Alex Miller <almiller_1@yahoo.co.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
index 27efbcd..d27abef 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
@@ -49,6 +49,12 @@ static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb,	u8 skb_queue)
 	if (ieee80211_is_nullfunc(fc))
 		return QSLT_HIGH;
 
+	/* Kernel commit 1bf4bbb4024dcdab changed EAPOL packets to use
+	 * queue V0 at priority 7; however, the RTL8192SE appears to have
+	 * that queue at priority 6
+	 */
+	if (skb->priority == 7)
+		return QSLT_VO;
 	return skb->priority;
 }
 
-- 
1.9.1

[PATCH 3.13 136/160] rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 3234f5b06fc3094176a86772cc64baf3decc98fc upstream.

Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs')
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 324aa58..c3f2b55 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1001,7 +1001,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 	err = _rtl92cu_init_mac(hw);
 	if (err) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n");
-		return err;
+		goto exit;
 	}
 	err = rtl92c_download_fw(hw);
 	if (err) {
-- 
1.9.1

[PATCH 3.13 137/160] drm/radeon/uvd: use lower clocks on old UVD to boot v2

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Christian=20K=C3=B6nig?= <christian.koenig@amd.com>

commit e45187620f9fc103edf68fa5ea78e73033e1668c upstream.

Some RV7xx generation hardware crashes after you
raise the UVD clocks for the first time. Try to
avoid this by using the lower clocks to boot these.

Workaround for: https://bugzilla.kernel.org/show_bug.cgi?id=71891

v2: lower clocks on IB test as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/uvd_v1_0.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c
index d4a68af..c310a0a 100644
--- a/drivers/gpu/drm/radeon/uvd_v1_0.c
+++ b/drivers/gpu/drm/radeon/uvd_v1_0.c
@@ -83,7 +83,10 @@ int uvd_v1_0_init(struct radeon_device *rdev)
 	int r;
 
 	/* raise clocks while booting up the VCPU */
-	radeon_set_uvd_clocks(rdev, 53300, 40000);
+	if (rdev->family < CHIP_RV740)
+		radeon_set_uvd_clocks(rdev, 10000, 10000);
+	else
+		radeon_set_uvd_clocks(rdev, 53300, 40000);
 
 	r = uvd_v1_0_start(rdev);
 	if (r)
@@ -407,7 +410,10 @@ int uvd_v1_0_ib_test(struct radeon_device *rdev, struct radeon_ring *ring)
 	struct radeon_fence *fence = NULL;
 	int r;
 
-	r = radeon_set_uvd_clocks(rdev, 53300, 40000);
+	if (rdev->family < CHIP_RV740)
+		r = radeon_set_uvd_clocks(rdev, 10000, 10000);
+	else
+		r = radeon_set_uvd_clocks(rdev, 53300, 40000);
 	if (r) {
 		DRM_ERROR("radeon: failed to raise UVD clocks (%d).\n", r);
 		return r;
-- 
1.9.1

[PATCH 3.13 138/160] drm/radeon: use pflip irq on R600+ v2

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Christian=20K=C3=B6nig?= <christian.koenig@amd.com>

commit f5d636d2a74b755879feec35e14a259de52ccc07 upstream.

Testing the update pending bit directly after issuing an
update is nonsense cause depending on the pixel clock the
CRTC needs a bit of time to execute the flip even when we
are in the VBLANK period.

This is just a non invasive patch to solve the problem at
hand, a more complete and cleaner solution should follow
in the next merge window.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76564

v2: fix source IDs for CRTC2-6

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/cik.c            | 76 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/radeon/cikd.h           |  9 ++++
 drivers/gpu/drm/radeon/evergreen.c      | 28 +++++++++---
 drivers/gpu/drm/radeon/r600.c           | 13 ++++--
 drivers/gpu/drm/radeon/radeon.h         |  6 +++
 drivers/gpu/drm/radeon/radeon_display.c |  4 ++
 drivers/gpu/drm/radeon/si.c             | 28 +++++++++---
 7 files changed, 147 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index c8dc6d1..bc5fad4 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -6469,6 +6469,19 @@ static void cik_disable_interrupt_state(struct radeon_device *rdev)
 		WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
 		WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
+	/* pflip */
+	if (rdev->num_crtc >= 2) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 4) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 6) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
+	}
 
 	/* dac hotplug */
 	WREG32(DAC_AUTODETECT_INT_CONTROL, 0);
@@ -6825,6 +6838,25 @@ int cik_irq_set(struct radeon_device *rdev)
 		WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6);
 	}
 
+	if (rdev->num_crtc >= 2) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+	}
+	if (rdev->num_crtc >= 4) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+	}
+	if (rdev->num_crtc >= 6) {
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+	}
+
 	WREG32(DC_HPD1_INT_CONTROL, hpd1);
 	WREG32(DC_HPD2_INT_CONTROL, hpd2);
 	WREG32(DC_HPD3_INT_CONTROL, hpd3);
@@ -6861,6 +6893,29 @@ static inline void cik_irq_ack(struct radeon_device *rdev)
 	rdev->irq.stat_regs.cik.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5);
 	rdev->irq.stat_regs.cik.disp_int_cont6 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE6);
 
+	rdev->irq.stat_regs.cik.d1grph_int = RREG32(GRPH_INT_STATUS +
+		EVERGREEN_CRTC0_REGISTER_OFFSET);
+	rdev->irq.stat_regs.cik.d2grph_int = RREG32(GRPH_INT_STATUS +
+		EVERGREEN_CRTC1_REGISTER_OFFSET);
+	if (rdev->num_crtc >= 4) {
+		rdev->irq.stat_regs.cik.d3grph_int = RREG32(GRPH_INT_STATUS +
+			EVERGREEN_CRTC2_REGISTER_OFFSET);
+		rdev->irq.stat_regs.cik.d4grph_int = RREG32(GRPH_INT_STATUS +
+			EVERGREEN_CRTC3_REGISTER_OFFSET);
+	}
+	if (rdev->num_crtc >= 6) {
+		rdev->irq.stat_regs.cik.d5grph_int = RREG32(GRPH_INT_STATUS +
+			EVERGREEN_CRTC4_REGISTER_OFFSET);
+		rdev->irq.stat_regs.cik.d6grph_int = RREG32(GRPH_INT_STATUS +
+			EVERGREEN_CRTC5_REGISTER_OFFSET);
+	}
+
+	if (rdev->irq.stat_regs.cik.d1grph_int & GRPH_PFLIP_INT_OCCURRED)
+		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_CLEAR);
+	if (rdev->irq.stat_regs.cik.d2grph_int & GRPH_PFLIP_INT_OCCURRED)
+		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_CLEAR);
 	if (rdev->irq.stat_regs.cik.disp_int & LB_D1_VBLANK_INTERRUPT)
 		WREG32(LB_VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK);
 	if (rdev->irq.stat_regs.cik.disp_int & LB_D1_VLINE_INTERRUPT)
@@ -6871,6 +6926,12 @@ static inline void cik_irq_ack(struct radeon_device *rdev)
 		WREG32(LB_VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK);
 
 	if (rdev->num_crtc >= 4) {
+		if (rdev->irq.stat_regs.cik.d3grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET,
+			       GRPH_PFLIP_INT_CLEAR);
+		if (rdev->irq.stat_regs.cik.d4grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET,
+			       GRPH_PFLIP_INT_CLEAR);
 		if (rdev->irq.stat_regs.cik.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT)
 			WREG32(LB_VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK);
 		if (rdev->irq.stat_regs.cik.disp_int_cont2 & LB_D3_VLINE_INTERRUPT)
@@ -6882,6 +6943,12 @@ static inline void cik_irq_ack(struct radeon_device *rdev)
 	}
 
 	if (rdev->num_crtc >= 6) {
+		if (rdev->irq.stat_regs.cik.d5grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET,
+			       GRPH_PFLIP_INT_CLEAR);
+		if (rdev->irq.stat_regs.cik.d6grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET,
+			       GRPH_PFLIP_INT_CLEAR);
 		if (rdev->irq.stat_regs.cik.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT)
 			WREG32(LB_VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK);
 		if (rdev->irq.stat_regs.cik.disp_int_cont4 & LB_D5_VLINE_INTERRUPT)
@@ -7233,6 +7300,15 @@ restart_ih:
 				break;
 			}
 			break;
+		case 8: /* D1 page flip */
+		case 10: /* D2 page flip */
+		case 12: /* D3 page flip */
+		case 14: /* D4 page flip */
+		case 16: /* D5 page flip */
+		case 18: /* D6 page flip */
+			DRM_DEBUG("IH: D%d flip\n", ((src_id - 8) >> 1) + 1);
+			radeon_crtc_handle_flip(rdev, (src_id - 8) >> 1);
+			break;
 		case 42: /* HPD hotplug */
 			switch (src_data) {
 			case 0:
diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h
index 5964af5..e33f8d1 100644
--- a/drivers/gpu/drm/radeon/cikd.h
+++ b/drivers/gpu/drm/radeon/cikd.h
@@ -871,6 +871,15 @@
 #       define DC_HPD6_RX_INTERRUPT                     (1 << 18)
 #define DISP_INTERRUPT_STATUS_CONTINUE6                 0x6780
 
+/* 0x6858, 0x7458, 0x10058, 0x10c58, 0x11858, 0x12458 */
+#define GRPH_INT_STATUS                                 0x6858
+#       define GRPH_PFLIP_INT_OCCURRED                  (1 << 0)
+#       define GRPH_PFLIP_INT_CLEAR                     (1 << 8)
+/* 0x685c, 0x745c, 0x1005c, 0x10c5c, 0x1185c, 0x1245c */
+#define GRPH_INT_CONTROL                                0x685c
+#       define GRPH_PFLIP_INT_MASK                      (1 << 0)
+#       define GRPH_PFLIP_INT_TYPE                      (1 << 8)
+
 #define	DAC_AUTODETECT_INT_CONTROL			0x67c8
 
 #define DC_HPD1_INT_STATUS                              0x601c
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 6d27faf..4c84deb 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4325,7 +4325,6 @@ int evergreen_irq_set(struct radeon_device *rdev)
 	u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0;
 	u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6;
 	u32 grbm_int_cntl = 0;
-	u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0;
 	u32 afmt1 = 0, afmt2 = 0, afmt3 = 0, afmt4 = 0, afmt5 = 0, afmt6 = 0;
 	u32 dma_cntl, dma_cntl1 = 0;
 	u32 thermal_int = 0;
@@ -4508,15 +4507,21 @@ int evergreen_irq_set(struct radeon_device *rdev)
 		WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6);
 	}
 
-	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
-	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET,
+	       GRPH_PFLIP_INT_MASK);
+	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET,
+	       GRPH_PFLIP_INT_MASK);
 	if (rdev->num_crtc >= 4) {
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
 	}
 	if (rdev->num_crtc >= 6) {
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5);
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
 	}
 
 	WREG32(DC_HPD1_INT_CONTROL, hpd1);
@@ -4905,6 +4910,15 @@ restart_ih:
 				break;
 			}
 			break;
+		case 8: /* D1 page flip */
+		case 10: /* D2 page flip */
+		case 12: /* D3 page flip */
+		case 14: /* D4 page flip */
+		case 16: /* D5 page flip */
+		case 18: /* D6 page flip */
+			DRM_DEBUG("IH: D%d flip\n", ((src_id - 8) >> 1) + 1);
+			radeon_crtc_handle_flip(rdev, (src_id - 8) >> 1);
+			break;
 		case 42: /* HPD hotplug */
 			switch (src_data) {
 			case 0:
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 2d75542..3a55ae4 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3421,7 +3421,6 @@ int r600_irq_set(struct radeon_device *rdev)
 	u32 hpd1, hpd2, hpd3, hpd4 = 0, hpd5 = 0, hpd6 = 0;
 	u32 grbm_int_cntl = 0;
 	u32 hdmi0, hdmi1;
-	u32 d1grph = 0, d2grph = 0;
 	u32 dma_cntl;
 	u32 thermal_int = 0;
 
@@ -3530,8 +3529,8 @@ int r600_irq_set(struct radeon_device *rdev)
 	WREG32(CP_INT_CNTL, cp_int_cntl);
 	WREG32(DMA_CNTL, dma_cntl);
 	WREG32(DxMODE_INT_MASK, mode_int);
-	WREG32(D1GRPH_INTERRUPT_CONTROL, d1grph);
-	WREG32(D2GRPH_INTERRUPT_CONTROL, d2grph);
+	WREG32(D1GRPH_INTERRUPT_CONTROL, DxGRPH_PFLIP_INT_MASK);
+	WREG32(D2GRPH_INTERRUPT_CONTROL, DxGRPH_PFLIP_INT_MASK);
 	WREG32(GRBM_INT_CNTL, grbm_int_cntl);
 	if (ASIC_IS_DCE3(rdev)) {
 		WREG32(DC_HPD1_INT_CONTROL, hpd1);
@@ -3834,6 +3833,14 @@ restart_ih:
 				break;
 			}
 			break;
+		case 9: /* D1 pflip */
+			DRM_DEBUG("IH: D1 flip\n");
+			radeon_crtc_handle_flip(rdev, 0);
+			break;
+		case 11: /* D2 pflip */
+			DRM_DEBUG("IH: D2 flip\n");
+			radeon_crtc_handle_flip(rdev, 1);
+			break;
 		case 19: /* HPD/DAC hotplug */
 			switch (src_data) {
 			case 0:
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 319bd81..68b29d9 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -723,6 +723,12 @@ struct cik_irq_stat_regs {
 	u32 disp_int_cont4;
 	u32 disp_int_cont5;
 	u32 disp_int_cont6;
+	u32 d1grph_int;
+	u32 d2grph_int;
+	u32 d3grph_int;
+	u32 d4grph_int;
+	u32 d5grph_int;
+	u32 d6grph_int;
 };
 
 union radeon_irq_stat_regs {
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 0ec48ea..f3514ea 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -282,6 +282,10 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id)
 	u32 update_pending;
 	int vpos, hpos;
 
+	/* can happen during initialization */
+	if (radeon_crtc == NULL)
+		return;
+
 	spin_lock_irqsave(&rdev->ddev->event_lock, flags);
 	work = radeon_crtc->unpin_work;
 	if (work == NULL ||
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index c6cfa44..d9d8e55 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5672,7 +5672,6 @@ int si_irq_set(struct radeon_device *rdev)
 	u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0;
 	u32 hpd1 = 0, hpd2 = 0, hpd3 = 0, hpd4 = 0, hpd5 = 0, hpd6 = 0;
 	u32 grbm_int_cntl = 0;
-	u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0;
 	u32 dma_cntl, dma_cntl1;
 	u32 thermal_int = 0;
 
@@ -5811,16 +5810,22 @@ int si_irq_set(struct radeon_device *rdev)
 	}
 
 	if (rdev->num_crtc >= 2) {
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
 	}
 	if (rdev->num_crtc >= 4) {
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
 	}
 	if (rdev->num_crtc >= 6) {
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5);
-		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
+		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET,
+		       GRPH_PFLIP_INT_MASK);
 	}
 
 	if (!ASIC_IS_NODCE(rdev)) {
@@ -6184,6 +6189,15 @@ restart_ih:
 				break;
 			}
 			break;
+		case 8: /* D1 page flip */
+		case 10: /* D2 page flip */
+		case 12: /* D3 page flip */
+		case 14: /* D4 page flip */
+		case 16: /* D5 page flip */
+		case 18: /* D6 page flip */
+			DRM_DEBUG("IH: D%d flip\n", ((src_id - 8) >> 1) + 1);
+			radeon_crtc_handle_flip(rdev, (src_id - 8) >> 1);
+			break;
 		case 42: /* HPD hotplug */
 			switch (src_data) {
 			case 0:
-- 
1.9.1

[PATCH 3.13 139/160] drm/radeon: check buffer relocation offset

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Liu <leo.liu@amd.com>

commit 695daf1a8e731a4b5b89de89a61f32a4d7ad7094 upstream.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/radeon/radeon_uvd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index 60a0044..c085917 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -465,6 +465,10 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p,
 	cmd = radeon_get_ib_value(p, p->idx) >> 1;
 
 	if (cmd < 0x4) {
+		if (end <= start) {
+			DRM_ERROR("invalid reloc offset %X!\n", offset);
+			return -EINVAL;
+		}
 		if ((end - start) < buf_sizes[cmd]) {
 			DRM_ERROR("buffer (%d) to small (%d / %d)!\n", cmd,
 				  (unsigned)(end - start), buf_sizes[cmd]);
-- 
1.9.1

[PATCH 3.13 140/160] drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilia Mirkin <imirkin@alum.mit.edu>

commit a3d0b1218d351c6e6f3cea36abe22236a08cb246 upstream.

There appear to be a crop of new hardware where the vbios is not
available from PROM/PRAMIN, but there is a valid _ROM method in ACPI.
The data read from PCIROM almost invariably contains invalid
instructions (still has the x86 opcodes), which makes this a low-risk
way to try to obtain a valid vbios image.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/nouveau/nouveau_acpi.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index ba0183f..d3c7646 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -423,9 +423,6 @@ bool nouveau_acpi_rom_supported(struct pci_dev *pdev)
 	acpi_status status;
 	acpi_handle dhandle, rom_handle;
 
-	if (!nouveau_dsm_priv.dsm_detected && !nouveau_dsm_priv.optimus_detected)
-		return false;
-
 	dhandle = ACPI_HANDLE(&pdev->dev);
 	if (!dhandle)
 		return false;
-- 
1.9.1

[PATCH 3.13 141/160] drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maarten Lankhorst <maarten.lankhorst@canonical.com>

commit 806cbc5026933a781b66adecf6d1658fde9138e6 upstream.

Fixes a regression introduced by 060810d7abaabca "drm/nouveau: fix locking
issues in page flipping paths".  chan->cli->mutex is unlocked a second time
in the fail_unreserve path, fix this by moving mutex_unlock down.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/gpu/drm/nouveau/nouveau_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 91c826c..a0b2b87 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -658,9 +658,9 @@ nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 	}
 
 	ret = nouveau_page_flip_emit(chan, old_bo, new_bo, s, &fence);
-	mutex_unlock(&chan->cli->mutex);
 	if (ret)
 		goto fail_unreserve;
+	mutex_unlock(&chan->cli->mutex);
 
 	/* Update the crtc struct and cleanup */
 	crtc->fb = fb;
-- 
1.9.1

[PATCH 3.13 142/160] ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit 7040b6d1febfdbd9c1595efb751d492cd2503f96 upstream.

The TEAC UD-H01 firmware sends wrong feedback frequency values, thus
causing the PC to send the samples at a wrong rate, which results in
clicks and crackles in the output.

Add a workaround to detect and fix the corruption.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
[mick37@gmx.de: use sender->udh01_fb_quirk rather than
 ep->udh01_fb_quirk in snd_usb_handle_sync_urb()]
Reported-and-tested-by: Mick <mick37@gmx.de>
Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/usb/card.h     |  1 +
 sound/usb/endpoint.c | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/sound/usb/card.h b/sound/usb/card.h
index 9867ab8..97acb90 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -92,6 +92,7 @@ struct snd_usb_endpoint {
 	unsigned int curframesize;      /* current packet size in frames (for capture) */
 	unsigned int syncmaxsize;	/* sync endpoint packet size */
 	unsigned int fill_max:1;	/* fill max packet size always */
+	unsigned int udh01_fb_quirk:1;	/* corrupted feedback data */
 	unsigned int datainterval;      /* log_2 of data packet interval */
 	unsigned int syncinterval;	/* P for adaptive mode, 0 otherwise */
 	unsigned char silence_value;
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 83aabea2..814430f 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -469,6 +469,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 			ep->syncinterval = 3;
 
 		ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize);
+
+		if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ &&
+		    ep->syncmaxsize == 4)
+			ep->udh01_fb_quirk = 1;
 	}
 
 	list_add_tail(&ep->list, &chip->ep_list);
@@ -1099,7 +1103,16 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
 	if (f == 0)
 		return;
 
-	if (unlikely(ep->freqshift == INT_MIN)) {
+	if (unlikely(sender->udh01_fb_quirk)) {
+		/*
+		 * The TEAC UD-H01 firmware sometimes changes the feedback value
+		 * by +/- 0x1.0000.
+		 */
+		if (f < ep->freqn - 0x8000)
+			f += 0x10000;
+		else if (f > ep->freqn + 0x8000)
+			f -= 0x10000;
+	} else if (unlikely(ep->freqshift == INT_MIN)) {
 		/*
 		 * The first time we see a feedback value, determine its format
 		 * by shifting it left or right until it matches the nominal
-- 
1.9.1

[PATCH 3.13 143/160] USB: OHCI: fix problem with global suspend on ATI controllers

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit c1db30a2a79eb59997b13b8cabf2a50bea9f04e1 upstream.

Some OHCI controllers from ATI/AMD seem to have difficulty with
"global" USB suspend, that is, suspending an entire USB bus without
setting the suspend feature for each port connected to a device.  When
we try to resume the child devices, the controller gives timeout
errors on the unsuspended ports, requiring resets, and can even cause
ohci-hcd to hang; see

	http://marc.info/?l=linux-usb&m=139514332820398&w=2

and the following messages.

This patch fixes the problem by adding a new quirk flag to ohci-hcd.
The flag causes the ohci_rh_suspend() routine to suspend each
unsuspended, enabled port before suspending the root hub.  This
effectively converts the "global" suspend to an ordinary root-hub
suspend.  There is no need to unsuspend these ports when the root hub
is resumed, because the child devices will be resumed anyway in the
course of a normal system resume ("global" suspend is never used for
runtime PM).

This patch should be applied to all stable kernels which include
commit 0aa2832dd0d9 (USB: use "global suspend" for system sleep on
USB-2 buses) or a backported version thereof.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Peter Münster <pmlists@free.fr>
Tested-by: Peter Münster <pmlists@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/host/ohci-hub.c | 18 ++++++++++++++++++
 drivers/usb/host/ohci-pci.c |  1 +
 drivers/usb/host/ohci.h     |  2 ++
 3 files changed, 21 insertions(+)

diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 61705a7..baed68c 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -90,6 +90,24 @@ __acquires(ohci->lock)
 	dl_done_list (ohci);
 	finish_unlinks (ohci, ohci_frame_no(ohci));
 
+	/*
+	 * Some controllers don't handle "global" suspend properly if
+	 * there are unsuspended ports.  For these controllers, put all
+	 * the enabled ports into suspend before suspending the root hub.
+	 */
+	if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) {
+		__hc32 __iomem	*portstat = ohci->regs->roothub.portstatus;
+		int		i;
+		unsigned	temp;
+
+		for (i = 0; i < ohci->num_ports; (++i, ++portstat)) {
+			temp = ohci_readl(ohci, portstat);
+			if ((temp & (RH_PS_PES | RH_PS_PSS)) ==
+					RH_PS_PES)
+				ohci_writel(ohci, RH_PS_PSS, portstat);
+		}
+	}
+
 	/* maybe resume can wake root hub */
 	if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
 		ohci->hc_control |= OHCI_CTRL_RWE;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 90879e9..bb15096 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -160,6 +160,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
 	}
 
+	ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index e2e5faa..0b2e58c 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -405,6 +405,8 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
 #define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
+#define	OHCI_QUIRK_GLOBAL_SUSPEND	0x800		/* must suspend ports */
+
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
-- 
1.9.1

[PATCH 3.13 144/160] usb: qcserial: add a number of Dell devices

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit 4d7c0136a54f62501f8a34c4d08a5e0258d3d3ca upstream.

Dan writes:

"The Dell drivers use the same configuration for PIDs:

81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card
81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card
81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card
81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card
81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card

These devices are all clearly Sierra devices, but are also definitely
Gobi-based.  The A8 might be the MC7700/7710 and A9 is likely a MC7750.

>From DellGobi5kSetup.exe from the Dell drivers:

usbif0: serial/firmware loader?
usbif2: nmea
usbif3: modem/ppp
usbif8: net/QMI"

Reported-by: AceLan Kao <acelan.kao@canonical.com>
Reported-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/serial/qcserial.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 7ed681a..6c0a542 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -151,6 +151,21 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)},	/* Netgear AirCard 340U Device Management */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)},	/* Netgear AirCard 340U NMEA */
 	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)},	/* Netgear AirCard 340U Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 0)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 3)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 0)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 2)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 0)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 2)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 3)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 0)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 2)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 3)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card Modem */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 0)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card Device Management */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 2)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card NMEA */
+	{USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 3)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card Modem */
 
 	{ }				/* Terminating entry */
 };
-- 
1.9.1

[PATCH 3.13 145/160] usb: storage: shuttle_usbat: fix discs being detected twice

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Forsi <dforsi@gmail.com>

commit df602c2d2358f02c6e49cffc5b49b9daa16db033 upstream.

Even if the USB-to-ATAPI converter supported multiple LUNs, this
driver would always detect the same physical device or media because
it doesn't use srb->device->lun in any way.
Tested with an Hewlett-Packard CD-Writer Plus 8200e.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/storage/shuttle_usbat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 4ef2a80..008d805 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1851,7 +1851,7 @@ static int usbat_probe(struct usb_interface *intf,
 	us->transport_name = "Shuttle USBAT";
 	us->transport = usbat_flash_transport;
 	us->transport_reset = usb_stor_CB_reset;
-	us->max_lun = 1;
+	us->max_lun = 0;
 
 	result = usb_stor_probe2(us);
 	return result;
-- 
1.9.1

[PATCH 3.13 146/160] fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>

commit d183c81929beeba842b74422f754446ef2b8b49c upstream.

Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller
present in these SoCs has bit 17 of USBx_CONTROL register marked as
Reserved - there is no PHY_CLK_VALID bit there.

Testing for this bit in ehci_fsl_setup_phy() behaves differently on two
P1020RDB boards available here - on one board test passes and fsl-usb
init succeeds, but on other board test fails, causing fsl-usb init to
fail.

This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on
controller version 1.6 that (per manual) does not have this bit.

Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/host/ehci-fsl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index a06d501..df1fdca 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -261,7 +261,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 		break;
 	}
 
-	if (pdata->have_sysif_regs && pdata->controller_ver &&
+	if (pdata->have_sysif_regs &&
+	    pdata->controller_ver > FSL_USB_VER_1_6 &&
 	    (phy_mode == FSL_USB2_PHY_ULPI)) {
 		/* check PHY_CLK_VALID to get phy clk valid */
 		if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
-- 
1.9.1

[PATCH 3.13 147/160] tty: serial: 8250_core.c Bug fix for Exar chips.

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Welling <mwelling@ieee.org>

commit b790f210fe8423eff881b2a8a93ba5dbc45534d0 upstream.

The sleep function was updated to put the serial port to sleep only when necessary.
This appears to resolve the errant behavior of the driver as described in
Kernel Bug 61961 – "My Exar Corp. XR17C/D152 Dual PCI UART modem does not
work with 3.8.0".

Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/tty/serial/8250/8250_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 922d5bc..78abb19 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -555,7 +555,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 	 */
 	if ((p->port.type == PORT_XR17V35X) ||
 	   (p->port.type == PORT_XR17D15X)) {
-		serial_out(p, UART_EXAR_SLEEP, 0xff);
+		serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0);
 		return;
 	}
 
-- 
1.9.1

[PATCH 3.13 148/160] drivers/tty/hvc: don't free hvc_console_setup after init

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomoki Sekiyama <tomoki.sekiyama@hds.com>

commit 501fed45b7e8836ee9373f4d31e2d85e3db6103a upstream.

When 'console=hvc0' is specified to the kernel parameter in x86 KVM guest,
hvc console is setup within a kthread. However, that will cause SEGV
and the boot will fail when the driver is builtin to the kernel,
because currently hvc_console_setup() is annotated with '__init'. This
patch removes '__init' to boot the guest successfully with 'console=hvc0'.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/tty/hvc/hvc_console.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 620da5f..e8e06d8 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -190,7 +190,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index)
 	return hvc_driver;
 }
 
-static int __init hvc_console_setup(struct console *co, char *options)
+static int hvc_console_setup(struct console *co, char *options)
 {	
 	if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
 		return -ENODEV;
-- 
1.9.1

[PATCH 3.13 149/160] tty: Fix lockless tty buffer race

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit 62a0d8d7c2b29f92850e4ee3c38e5dfd936e92b2 upstream.

Commit 6a20dbd6caa2358716136144bf524331d70b1e03,
"tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc"
correctly identifies an unsafe race condition between
__tty_buffer_request_room() and flush_to_ldisc(), where the consumer
flush_to_ldisc() prematurely advances the head before consuming the
last of the data committed. For example:

           CPU 0                     |            CPU 1
__tty_buffer_request_room            | flush_to_ldisc
  ...                                |   ...
                                     |   count = head->commit - head->read
  n = tty_buffer_alloc()             |
  b->commit = b->used                |
  b->next = n                        |
                                     |   if (!count)                /* T */
                                     |     if (head->next == NULL)  /* F */
                                     |     buf->head = head->next

In this case, buf->head has been advanced but head->commit may have
been updated with a new value.

Instead of reintroducing an unnecessary lock, fix the race locklessly.
Read the commit-next pair in the reverse order of writing, which guarantees
the commit value read is the latest value written if the head is
advancing.

Reported-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/tty/tty_buffer.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 2b52d80..4847fc5 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -248,7 +248,11 @@ int tty_buffer_request_room(struct tty_port *port, size_t size)
 		if ((n = tty_buffer_alloc(port, size)) != NULL) {
 			buf->tail = n;
 			b->commit = b->used;
-			smp_mb();
+			/* paired w/ barrier in flush_to_ldisc(); ensures the
+			 * latest commit value can be read before the head is
+			 * advanced to the next buffer
+			 */
+			smp_wmb();
 			b->next = n;
 		} else
 			size = left;
@@ -449,17 +453,24 @@ static void flush_to_ldisc(struct work_struct *work)
 
 	while (1) {
 		struct tty_buffer *head = buf->head;
+		struct tty_buffer *next;
 		int count;
 
 		/* Ldisc or user is trying to gain exclusive access */
 		if (atomic_read(&buf->priority))
 			break;
 
+		next = head->next;
+		/* paired w/ barrier in __tty_buffer_request_room();
+		 * ensures commit value read is not stale if the head
+		 * is advancing to the next buffer
+		 */
+		smp_rmb();
 		count = head->commit - head->read;
 		if (!count) {
-			if (head->next == NULL)
+			if (next == NULL)
 				break;
-			buf->head = head->next;
+			buf->head = next;
 			tty_buffer_free(port, head);
 			continue;
 		}
-- 
1.9.1

[PATCH 3.13 150/160] USB: Nokia 305 should be treated as unusual dev

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Victor A. Santos" <victoraur.santos@gmail.com>

commit f0ef5d41792a46a1085dead9dfb0bdb2c574638e upstream.

Signed-off-by: Victor A. Santos <victoraur.santos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/storage/unusual_devs.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index adbeb25..1010341 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -234,6 +234,13 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x05af, 0x0742, 0x0742,
+		"Nokia",
+		"305",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
 /* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */
 UNUSUAL_DEV(  0x0421, 0x06aa, 0x1110, 0x1110,
 		"Nokia",
-- 
1.9.1

[PATCH 3.13 151/160] USB: Nokia 5300 should be treated as unusual dev

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Forsi <dforsi@gmail.com>

commit 6ed07d45d09bc2aa60e27b845543db9972e22a38 upstream.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/usb/storage/unusual_devs.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1010341..042c83b0 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -234,6 +234,13 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Daniele Forsi <dforsi@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0350, 0x0350,
+		"Nokia",
+		"5300",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
 /* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */
 UNUSUAL_DEV(  0x0421, 0x05af, 0x0742, 0x0742,
 		"Nokia",
-- 
1.9.1

[PATCH 3.13 152/160] HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 2f433083e854ec72c19dc9b0e1cebcc8e230fd75 upstream.

This touchpad seriously dislikes init reports, not only timeing out, but
also refusing to work after this.

Reported-and-tested-by: Vincent Fortier <th0ma7@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/hid/hid-ids.h           | 1 +
 drivers/hid/usbhid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f9304cb..0ef390e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -809,6 +809,7 @@
 #define USB_DEVICE_ID_SYNAPTICS_DPAD	0x0013
 #define USB_DEVICE_ID_SYNAPTICS_LTS1	0x0af8
 #define USB_DEVICE_ID_SYNAPTICS_LTS2	0x1d10
+#define USB_DEVICE_ID_SYNAPTICS_TP_V103	0x5710
 
 #define USB_VENDOR_ID_THINGM		0x27b8
 #define USB_DEVICE_ID_BLINK1		0x01ed
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 0db9a67..6489dd8 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -115,6 +115,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_LTS1, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_LTS2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SIS, USB_DEVICE_ID_SIS_TS, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP_V103, HID_QUIRK_NO_INIT_REPORTS },
 
 	{ 0, 0 }
 };
-- 
1.9.1

[PATCH 3.13 153/160] ALSA: hda - hdmi: Set converter channel count even without sink

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <anssi.hannula@iki.fi>

commit f06ab794af7055d0949b09885f79f8b493deec64 upstream.

Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel
count") channel count is no longer being set if monitor_present is 0.
This is because setting the count was moved after the CA value is
determined, which is only after the monitor_present check in
hdmi_setup_audio_infoframe().

Unfortunately, in some cases, such as with a non-spec-compliant codec or
with a problematic video driver, monitor_present is always 0. As a
specific example, this seems to happen with gen1 ATV (SiI1390 codec),
causing left-channel-only stereo playback (multi-channel playback has
apparently never worked with this codec despite it reporting 8 channels,
reason unknown).

Simply setting converter channel count without setting the pin infoframe
and channel mapping as well does not theoretically make much sense as
this will just mean they are out-of-sync and multichannel playback will
have a wrong channel mapping.

However, adding back just setting the converter channel count even in
no-monitor case is the safest change which at least fixes the stereo
playback regression on SiI1390 codec. Do that.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: Stephan Raue <stephan@openelec.tv>
Tested-by: Stephan Raue <stephan@openelec.tv>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 sound/pci/hda/patch_hdmi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 6baac44..a21a325 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1120,8 +1120,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
 					    AMP_OUT_UNMUTE);
 
 	eld = &per_pin->sink_eld;
-	if (!eld->monitor_present)
+	if (!eld->monitor_present) {
+		hdmi_set_channel_count(codec, per_pin->cvt_nid, channels);
 		return;
+	}
 
 	if (!non_pcm && per_pin->chmap_set)
 		ca = hdmi_manual_channel_allocation(channels, per_pin->chmap);
-- 
1.9.1

[PATCH 3.13 154/160] Input: elantech - fix touchpad initialization on Gigabyte U2442

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 36189cc3cd57ab0f1cd75241f93fe01de928ac06 upstream.

The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2

Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"

Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.

https://bugzilla.kernel.org/show_bug.cgi?id=61151

Reported-by: Philipp Wolfer <ph.wolfer@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 Documentation/input/elantech.txt |  5 ++++-
 drivers/input/mouse/elantech.c   | 26 +++++++++++++++++++++++++-
 drivers/input/mouse/elantech.h   |  1 +
 3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index 5602eb7..e1ae127 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -504,9 +504,12 @@ byte 5:
 * reg_10
 
    bit   7   6   5   4   3   2   1   0
-         0   0   0   0   0   0   0   A
+         0   0   0   0   R   F   T   A
 
          A: 1 = enable absolute tracking
+         T: 1 = enable two finger mode auto correct
+         F: 1 = disable ABS Position Filter
+         R: 1 = enable real hardware resolution
 
 6.2 Native absolute mode 6 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index ef1cf52..230cdcf 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
@@ -831,7 +832,11 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 		break;
 
 	case 3:
-		etd->reg_10 = 0x0b;
+		if (etd->set_hw_resolution)
+			etd->reg_10 = 0x0b;
+		else
+			etd->reg_10 = 0x03;
+
 		if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
 			rc = -1;
 
@@ -1331,6 +1336,22 @@ static int elantech_reconnect(struct psmouse *psmouse)
 }
 
 /*
+ * Some hw_version 3 models go into error state when we try to set bit 3 of r10
+ */
+static const struct dmi_system_id no_hw_res_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Gigabyte U2442 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "U2442"),
+		},
+	},
+#endif
+	{ }
+};
+
+/*
  * determine hardware version and set some properties according to it.
  */
 static int elantech_set_properties(struct elantech_data *etd)
@@ -1389,6 +1410,9 @@ static int elantech_set_properties(struct elantech_data *etd)
 	 */
 	etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000);
 
+	/* Enable real hardware resolution on hw_version 3 ? */
+	etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
+
 	return 0;
 }
 
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 036a04a..9e0e2a1 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -130,6 +130,7 @@ struct elantech_data {
 	bool jumpy_cursor;
 	bool reports_pressure;
 	bool crc_enabled;
+	bool set_hw_resolution;
 	unsigned char hw_version;
 	unsigned int fw_version;
 	unsigned int single_finger_reports;
-- 
1.9.1

[PATCH 3.13 155/160] posix_acl: handle NULL ACL in posix_acl_equiv_mode

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit 50c6e282bdf5e8dabf8d7cf7b162545a55645fd9 upstream.

Various filesystems don't bother checking for a NULL ACL in
posix_acl_equiv_mode, and thus can dereference a NULL pointer when it
gets passed one. This usually happens from the NFS server, as the ACL tools
never pass a NULL ACL, but instead of one representing the mode bits.

Instead of adding boilerplat to all filesystems put this check into one place,
which will allow us to remove the check from other filesystems as well later
on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ben Greear <greearb@candelatech.com>
Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>,
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/posix_acl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/posix_acl.c b/fs/posix_acl.c
index 8bd2135..3542f1f 100644
--- a/fs/posix_acl.c
+++ b/fs/posix_acl.c
@@ -158,6 +158,12 @@ posix_acl_equiv_mode(const struct posix_acl *acl, umode_t *mode_p)
 	umode_t mode = 0;
 	int not_equiv = 0;
 
+	/*
+	 * A null ACL can always be presented as mode bits.
+	 */
+	if (!acl)
+		return 0;
+
 	FOREACH_ACL_ENTRY(pa, acl, pe) {
 		switch (pa->e_tag) {
 			case ACL_USER_OBJ:
-- 
1.9.1

[PATCH 3.13 156/160] mm/page-writeback.c: fix divide by zero in pos_ratio_polynom

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rik van Riel <riel@redhat.com>

commit d5c9fde3dae750889168807038243ff36431d276 upstream.

It is possible for "limit - setpoint + 1" to equal zero, after getting
truncated to a 32 bit variable, and resulting in a divide by zero error.

Using the fully 64 bit divide functions avoids this problem.  It also
will cause pos_ratio_polynom() to return the correct value when
(setpoint - limit) exceeds 2^32.

Also uninline pos_ratio_polynom, at Andrew's request.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/page-writeback.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7106cb1..8f6daa6 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -593,14 +593,14 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
  * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
  *     => fast response on large errors; small oscillation near setpoint
  */
-static inline long long pos_ratio_polynom(unsigned long setpoint,
+static long long pos_ratio_polynom(unsigned long setpoint,
 					  unsigned long dirty,
 					  unsigned long limit)
 {
 	long long pos_ratio;
 	long x;
 
-	x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
+	x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
 		    limit - setpoint + 1);
 	pos_ratio = x;
 	pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
@@ -842,7 +842,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
 	x_intercept = bdi_setpoint + span;
 
 	if (bdi_dirty < x_intercept - span / 4) {
-		pos_ratio = div_u64(pos_ratio * (x_intercept - bdi_dirty),
+		pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty),
 				    x_intercept - bdi_setpoint + 1);
 	} else
 		pos_ratio /= 4;
-- 
1.9.1

[PATCH 3.13 157/160] mm: compaction: detect when scanners meet in isolate_freepages

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlastimil Babka <vbabka@suse.cz>

commit 7ed695e069c3cbea5e1fd08f84a04536da91f584 upstream.

Compaction of a zone is finished when the migrate scanner (which begins
at the zone's lowest pfn) meets the free page scanner (which begins at
the zone's highest pfn).  This is detected in compact_zone() and in the
case of direct compaction, the compact_blockskip_flush flag is set so
that kswapd later resets the cached scanner pfn's, and a new compaction
may again start at the zone's borders.

The meeting of the scanners can happen during either scanner's activity.
However, it may currently fail to be detected when it occurs in the free
page scanner, due to two problems.  First, isolate_freepages() keeps
free_pfn at the highest block where it isolated pages from, for the
purposes of not missing the pages that are returned back to allocator
when migration fails.  Second, failing to isolate enough free pages due
to scanners meeting results in -ENOMEM being returned by
migrate_pages(), which makes compact_zone() bail out immediately without
calling compact_finished() that would detect scanners meeting.

This failure to detect scanners meeting might result in repeated
attempts at compaction of a zone that keep starting from the cached
pfn's close to the meeting point, and quickly failing through the
-ENOMEM path, without the cached pfns being reset, over and over.  This
has been observed (through additional tracepoints) in the third phase of
the mmtests stress-highalloc benchmark, where the allocator runs on an
otherwise idle system.  The problem was observed in the DMA32 zone,
which was used as a fallback to the preferred Normal zone, but on the
4GB system it was actually the largest zone.  The problem is even
amplified for such fallback zone - the deferred compaction logic, which
could (after being fixed by a previous patch) reset the cached scanner
pfn's, is only applied to the preferred zone and not for the fallbacks.

The problem in the third phase of the benchmark was further amplified by
commit 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy") which
resulted in a non-deterministic regression of the allocation success
rate from ~85% to ~65%.  This occurs in about half of benchmark runs,
making bisection problematic.  It is unlikely that the commit itself is
buggy, but it should put more pressure on the DMA32 zone during phases 1
and 2, which may leave it more fragmented in phase 3 and expose the bugs
that this patch fixes.

The fix is to make scanners meeting in isolate_freepage() stay that way,
and to check in compact_zone() for scanners meeting when migrate_pages()
returns -ENOMEM.  The result is that compact_finished() also detects
scanners meeting and sets the compact_blockskip_flush flag to make
kswapd reset the scanner pfn's.

The results in stress-highalloc benchmark show that the "regression" by
commit 81c0a2bb515f in phase 3 no longer occurs, and phase 1 and 2
allocation success rates are also significantly improved.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ kamal: 3.13-stable prereq for:
  49e068f mm/compaction: make isolate_freepages start at pageblock boundary ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/compaction.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/mm/compaction.c b/mm/compaction.c
index b74dc61..0d3ab2c 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -666,7 +666,7 @@ static void isolate_freepages(struct zone *zone,
 	 * is the end of the pageblock the migration scanner is using.
 	 */
 	pfn = cc->free_pfn;
-	low_pfn = cc->migrate_pfn + pageblock_nr_pages;
+	low_pfn = ALIGN(cc->migrate_pfn + 1, pageblock_nr_pages);
 
 	/*
 	 * Take care that if the migration scanner is at the end of the zone
@@ -682,7 +682,7 @@ static void isolate_freepages(struct zone *zone,
 	 * pages on cc->migratepages. We stop searching if the migrate
 	 * and free page scanners meet or enough free pages are isolated.
 	 */
-	for (; pfn > low_pfn && cc->nr_migratepages > nr_freepages;
+	for (; pfn >= low_pfn && cc->nr_migratepages > nr_freepages;
 					pfn -= pageblock_nr_pages) {
 		unsigned long isolated;
 
@@ -744,7 +744,14 @@ static void isolate_freepages(struct zone *zone,
 	/* split_free_page does not map the pages */
 	map_pages(freelist);
 
-	cc->free_pfn = high_pfn;
+	/*
+	 * If we crossed the migrate scanner, we want to keep it that way
+	 * so that compact_finished() may detect this
+	 */
+	if (pfn < low_pfn)
+		cc->free_pfn = max(pfn, zone->zone_start_pfn);
+	else
+		cc->free_pfn = high_pfn;
 	cc->nr_freepages = nr_freepages;
 }
 
@@ -1009,7 +1016,11 @@ static int compact_zone(struct zone *zone, struct compact_control *cc)
 		if (err) {
 			putback_movable_pages(&cc->migratepages);
 			cc->nr_migratepages = 0;
-			if (err == -ENOMEM) {
+			/*
+			 * migrate_pages() may return -ENOMEM when scanners meet
+			 * and we want compact_finished() to detect it
+			 */
+			if (err == -ENOMEM && cc->free_pfn > cc->migrate_pfn) {
 				ret = COMPACT_PARTIAL;
 				goto out;
 			}
-- 
1.9.1

[PATCH 3.13 158/160] mm/compaction: make isolate_freepages start at pageblock boundary

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlastimil Babka <vbabka@suse.cz>

commit 49e068f0b73dd042c186ffa9b420a9943e90389a upstream.

The compaction freepage scanner implementation in isolate_freepages()
starts by taking the current cc->free_pfn value as the first pfn.  In a
for loop, it scans from this first pfn to the end of the pageblock, and
then subtracts pageblock_nr_pages from the first pfn to obtain the first
pfn for the next for loop iteration.

This means that when cc->free_pfn starts at offset X rather than being
aligned on pageblock boundary, the scanner will start at offset X in all
scanned pageblock, ignoring potentially many free pages.  Currently this
can happen when

 a) zone's end pfn is not pageblock aligned, or

 b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE
    enabled and a hole spanning the beginning of a pageblock

This patch fixes the problem by aligning the initial pfn in
isolate_freepages() to pageblock boundary.  This also permits replacing
the end-of-pageblock alignment within the for loop with a simple
pageblock_nr_pages increment.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 mm/compaction.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/mm/compaction.c b/mm/compaction.c
index 0d3ab2c..1b99ee9 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -656,16 +656,20 @@ static void isolate_freepages(struct zone *zone,
 				struct compact_control *cc)
 {
 	struct page *page;
-	unsigned long high_pfn, low_pfn, pfn, z_end_pfn, end_pfn;
+	unsigned long high_pfn, low_pfn, pfn, z_end_pfn;
 	int nr_freepages = cc->nr_freepages;
 	struct list_head *freelist = &cc->freepages;
 
 	/*
 	 * Initialise the free scanner. The starting point is where we last
-	 * scanned from (or the end of the zone if starting). The low point
-	 * is the end of the pageblock the migration scanner is using.
+	 * successfully isolated from, zone-cached value, or the end of the
+	 * zone when isolating for the first time. We need this aligned to
+	 * the pageblock boundary, because we do pfn -= pageblock_nr_pages
+	 * in the for loop.
+	 * The low boundary is the end of the pageblock the migration scanner
+	 * is using.
 	 */
-	pfn = cc->free_pfn;
+	pfn = cc->free_pfn & ~(pageblock_nr_pages-1);
 	low_pfn = ALIGN(cc->migrate_pfn + 1, pageblock_nr_pages);
 
 	/*
@@ -685,6 +689,7 @@ static void isolate_freepages(struct zone *zone,
 	for (; pfn >= low_pfn && cc->nr_migratepages > nr_freepages;
 					pfn -= pageblock_nr_pages) {
 		unsigned long isolated;
+		unsigned long end_pfn;
 
 		/*
 		 * This can iterate a massively long zone without finding any
@@ -719,13 +724,10 @@ static void isolate_freepages(struct zone *zone,
 		isolated = 0;
 
 		/*
-		 * As pfn may not start aligned, pfn+pageblock_nr_page
-		 * may cross a MAX_ORDER_NR_PAGES boundary and miss
-		 * a pfn_valid check. Ensure isolate_freepages_block()
-		 * only scans within a pageblock
+		 * Take care when isolating in last pageblock of a zone which
+		 * ends in the middle of a pageblock.
 		 */
-		end_pfn = ALIGN(pfn + 1, pageblock_nr_pages);
-		end_pfn = min(end_pfn, z_end_pfn);
+		end_pfn = min(pfn + pageblock_nr_pages, z_end_pfn);
 		isolated = isolate_freepages_block(cc, pfn, end_pfn,
 						   freelist, false);
 		nr_freepages += isolated;
-- 
1.9.1

[PATCH 3.13 159/160] autofs: fix lockref lookup

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Kent <raven@themaw.net>

commit 6b6751f7feba68d8f5c72b72cc69a1c5a625529c upstream.

autofs needs to be able to see private data dentry flags for its dentrys
that are being created but not yet hashed and for its dentrys that have
been rmdir()ed but not yet freed.  It needs to do this so it can block
processes in these states until a status has been returned to indicate
the given operation is complete.

It does this by keeping two lists, active and expring, of dentrys in
this state and uses ->d_release() to keep them stable while it checks
the reference count to determine if they should be used.

But with the recent lockref changes dentrys being freed sometimes don't
transition to a reference count of 0 before being freed so autofs can
occassionally use a dentry that is invalid which can lead to a panic.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 fs/autofs4/root.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 92ef341..2a69bde 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -179,7 +179,7 @@ static struct dentry *autofs4_lookup_active(struct dentry *dentry)
 		spin_lock(&active->d_lock);
 
 		/* Already gone? */
-		if (!d_count(active))
+		if ((int) d_count(active) <= 0)
 			goto next;
 
 		qstr = &active->d_name;
@@ -230,7 +230,7 @@ static struct dentry *autofs4_lookup_expiring(struct dentry *dentry)
 
 		spin_lock(&expiring->d_lock);
 
-		/* Bad luck, we've already been dentry_iput */
+		/* We've already been dentry_iput or unlinked */
 		if (!expiring->d_inode)
 			goto next;
 
-- 
1.9.1

[PATCH 3.13 160/160] libata: Blacklist queued trim for Crucial M500

[Kamal Mostafa]

3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Martin K. Petersen" <martin.petersen@oracle.com>

commit 3b8d2676d15d6b2326757adb66b70a9cd6650373 upstream.

Queued trim only works for some users with MU05 firmware.  Revert to
blacklisting all firmware versions.

Introduced by commit d121f7d0cbb8 ("libata: Update queued trim blacklist
for M5x0 drives") which this effectively reverts, while retaining the
blacklisting of M550.

See

    https://bugzilla.kernel.org/show_bug.cgi?id=71371

for reports of trouble with MU05 firmware.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/ata/libata-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0a79c54..5ab4e3d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4224,10 +4224,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* devices that don't properly handle queued TRIM commands */
-	{ "Micron_M500*",		"MU0[1-4]*",	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Crucial_CT???M500SSD*",	"MU0[1-4]*",	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Micron_M550*",		NULL,		ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Crucial_CT???M550SSD*",	NULL,		ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M500SSD*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M550*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M550SSD*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
 
 	/*
 	 * Some WD SATA-I drives spin up and down erratically when the link
-- 
1.9.1

Re: [PATCH 3.13 131/160] Bluetooth: Fix redundant encryption request for reauthentication

[Johan Hedberg]

Hi,

On Tue, Jun 10, 2014, Kamal Mostafa wrote:
> 3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Johan Hedberg <johan.hedberg@intel.com>
> 
> commit 09da1f3463eb81d59685df723b1c5950b7570340 upstream.
> 
> When we're performing reauthentication (in order to elevate the
> security level from an unauthenticated key to an authenticated one) we
> do not need to issue any encryption command once authentication
> completes. Since the trigger for the encryption HCI command is the
> ENCRYPT_PEND flag this flag should not be set in this scenario.
> Instead, the REAUTH_PEND flag takes care of all necessary steps for
> reauthentication.
> 
> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
> ---
>  net/bluetooth/hci_conn.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)

This one has a regression reported against it:

https://bugzilla.kernel.org/show_bug.cgi?id=77541

The report also has a working fix for the issue which we'll be sending
to the stable trees (it's already in the Bluetooth subsystem tree). So
I'm not sure what the right way to proceed here: ignore this patch until
the other patch is available, apply this one and wait for the other one,
or just forget about both patches for the stable trees.

Johan

Re: [PATCH 3.13 131/160] Bluetooth: Fix redundant encryption request for reauthentication

[Kamal Mostafa]

On Wed, 2014-06-11 at 07:55 +0300, Johan Hedberg wrote:
> Hi,
> 
> On Tue, Jun 10, 2014, Kamal Mostafa wrote:
> > 3.13.11.3 -stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Johan Hedberg <johan.hedberg@intel.com>
> > 
> > commit 09da1f3463eb81d59685df723b1c5950b7570340 upstream.
> > 
> > When we're performing reauthentication (in order to elevate the
> > security level from an unauthenticated key to an authenticated one) we
> > do not need to issue any encryption command once authentication
> > completes. Since the trigger for the encryption HCI command is the
> > ENCRYPT_PEND flag this flag should not be set in this scenario.
> > Instead, the REAUTH_PEND flag takes care of all necessary steps for
> > reauthentication.
> > 
> > Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
> > Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
> > Signed-off-by: Kamal Mostafa <kamal@canonical.com>
> > ---
> >  net/bluetooth/hci_conn.c | 9 ++++++---
> >  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> This one has a regression reported against it:
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=77541
> 
> The report also has a working fix for the issue which we'll be sending
> to the stable trees (it's already in the Bluetooth subsystem tree). So
> I'm not sure what the right way to proceed here: ignore this patch until
> the other patch is available, apply this one and wait for the other one,
> or just forget about both patches for the stable trees.
> 
> Johan
> 

Thanks very much for the heads-up, Johan!

I've dropped this patch from the upcoming 3.13.11.3 release.  Please let
me know when the fix-fix lands in mainline so that I can pick them both
up together.

 -Kamal