linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
	Mark Brown <broonie@kernel.org>,
	Mike Turquette <mturquette@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Doug Anderson <dianders@chromium.org>,
	Olof Johansson <olof@lixom.net>,
	Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
	Daniel Stone <daniels@collabora.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v3 00/14] Add Maxim 77802 PMIC support
Date: Thu, 19 Jun 2014 20:20:26 +0200	[thread overview]
Message-ID: <1403202040-12641-1-git-send-email-javier.martinez@collabora.co.uk> (raw)

MAX77802 is a PMIC that contains 10 high efficiency Buck regulators,
32 Low-dropout (LDO) regulators, two 32kHz buffered clock outputs,
a Real-Time-Clock (RTC) and a I2C interface to program the individual
regulators, clocks and the RTC.

This third version of the patch-set addresses several issues pointed
out by Mark Brown, Lee Jones and Doug Anderson. The individual changes
are added on each patch change log.

This series are based on drivers added by Simon Glass to the Chrome OS
kernel and adds support for the Maxim 77802 Power Management IC, their
regulators, clocks, RTC and I2C interface.

The patch-set has been tested on both Daisy/Snow (max77686) and Peach
pit (max77802) Chromebooks and it's composed of the following patches:

Doug Anderson (1):
  mfd: max77686: Allow the max77686 rtc to wakeup the system

Javier Martinez Canillas (13):
  mfd: max77686: Convert to use regmap_irq
  clk: max77686: Add DT include for MAX77686 PMIC clock
  clk: max77686: Improve Maxim 77686 PMIC clocks binding
  clk: Add generic driver for Maxim PMIC clocks
  clk: max77686: Convert to the generic max clock driver
  mfd: Add driver for Maxim 77802 Power Management IC
  mfd: max77802: Add DT binding documentation
  regmap: Add regmap_reg_copy function
  regulator: Add driver for Maxim 77802 PMIC regulators
  clk: Add driver for Maxim 77802 PMIC clocks
  clk: max77802: Add DT binding documentation
  rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
  ARM: dts: Add max77802 device node for exynos5420-peach-pit

 .../devicetree/bindings/clock/maxim,max77686.txt   |  15 +-
 .../devicetree/bindings/clock/maxim,max77802.txt   |  42 ++
 Documentation/devicetree/bindings/mfd/max77802.txt |  97 +++
 arch/arm/boot/dts/exynos5420-peach-pit.dts         | 320 ++++++++++
 drivers/base/regmap/regmap.c                       |  34 +
 drivers/clk/Kconfig                                |  11 +
 drivers/clk/Makefile                               |   2 +
 drivers/clk/clk-max-gen.c                          | 197 ++++++
 drivers/clk/clk-max-gen.h                          |  32 +
 drivers/clk/clk-max77686.c                         | 183 +-----
 drivers/clk/clk-max77802.c                         |  99 +++
 drivers/mfd/Kconfig                                |  15 +
 drivers/mfd/Makefile                               |   3 +-
 drivers/mfd/max77686-irq.c                         | 319 ----------
 drivers/mfd/max77686.c                             |  97 ++-
 drivers/mfd/max77802.c                             | 368 +++++++++++
 drivers/regulator/Kconfig                          |   9 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/max77802.c                       | 691 +++++++++++++++++++++
 drivers/rtc/Kconfig                                |  10 +
 drivers/rtc/Makefile                               |   1 +
 drivers/rtc/rtc-max77686.c                         |  55 +-
 drivers/rtc/rtc-max77802.c                         | 637 +++++++++++++++++++
 include/dt-bindings/clock/maxim,max77686.h         |  23 +
 include/dt-bindings/clock/maxim,max77802.h         |  22 +
 include/linux/mfd/max77686-private.h               |  28 +-
 include/linux/mfd/max77686.h                       |   2 -
 include/linux/mfd/max77802-private.h               | 307 +++++++++
 include/linux/mfd/max77802.h                       | 124 ++++
 include/linux/regmap.h                             |   9 +
 30 files changed, 3221 insertions(+), 532 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
 create mode 100644 drivers/clk/clk-max-gen.c
 create mode 100644 drivers/clk/clk-max-gen.h
 create mode 100644 drivers/clk/clk-max77802.c
 delete mode 100644 drivers/mfd/max77686-irq.c
 create mode 100644 drivers/mfd/max77802.c
 create mode 100644 drivers/regulator/max77802.c
 create mode 100644 drivers/rtc/rtc-max77802.c
 create mode 100644 include/dt-bindings/clock/maxim,max77686.h
 create mode 100644 include/dt-bindings/clock/maxim,max77802.h
 create mode 100644 include/linux/mfd/max77802-private.h
 create mode 100644 include/linux/mfd/max77802.h

-- 
2.0.0.rc2


             reply	other threads:[~2014-06-19 18:21 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-19 18:20 Javier Martinez Canillas [this message]
2014-06-19 18:20 ` [PATCH v3 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-25 10:05   ` Krzysztof Kozlowski
2014-06-25 10:29     ` Javier Martinez Canillas
2014-06-25 17:24       ` Doug Anderson
2014-06-25 18:11         ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-25 10:18   ` Krzysztof Kozlowski
2014-06-19 18:20 ` [PATCH v3 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-25 10:19   ` Krzysztof Kozlowski
2014-06-25 18:06   ` Doug Anderson
2014-06-25 18:13     ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-25 14:19   ` Krzysztof Kozlowski
2014-06-25 14:36     ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 06/14] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-06-25 14:30   ` Krzysztof Kozlowski
2014-06-19 18:20 ` [PATCH v3 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 09/14] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 14/14] ARM: dts: Add max77802 device node for exynos5420-peach-pit Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403202040-12641-1-git-send-email-javier.martinez@collabora.co.uk \
    --to=javier.martinez@collabora.co.uk \
    --cc=a.zummo@towertech.it \
    --cc=broonie@kernel.org \
    --cc=daniels@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=olof@lixom.net \
    --cc=sameo@linux.intel.com \
    --cc=sjoerd.simons@collabora.co.uk \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).