From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Daniel Stone <daniels@collabora.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v3 06/14] clk: max77686: Convert to the generic max clock driver
Date: Thu, 19 Jun 2014 20:20:32 +0200 [thread overview]
Message-ID: <1403202040-12641-7-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1403202040-12641-1-git-send-email-javier.martinez@collabora.co.uk>
Clocks drivers for Maxim PMIC are very similar so they can
be converted to use the generic Maxim clock driver.
Also, while being there use module_platform_driver() helper
macro to eliminate more boilerplate code.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/clk/Kconfig | 1 +
drivers/clk/clk-max77686.c | 176 +++------------------------------------------
2 files changed, 9 insertions(+), 168 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 73f78e8..3fd4270 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_MAX_GEN
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77686 MFD"
depends on MFD_MAX77686
+ select COMMON_CLK_MAX_GEN
---help---
This driver supports Maxim 77686 crystal oscillator clock.
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index 185b611..ed0beb4 100644
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -31,187 +31,37 @@
#include <linux/clkdev.h>
#include <dt-bindings/clock/maxim,max77686.h>
-
-struct max77686_clk {
- struct max77686_dev *iodev;
- u32 mask;
- struct clk_hw hw;
- struct clk_lookup *lookup;
-};
-
-static struct max77686_clk *to_max77686_clk(struct clk_hw *hw)
-{
- return container_of(hw, struct max77686_clk, hw);
-}
-
-static int max77686_clk_prepare(struct clk_hw *hw)
-{
- struct max77686_clk *max77686 = to_max77686_clk(hw);
-
- return regmap_update_bits(max77686->iodev->regmap,
- MAX77686_REG_32KHZ, max77686->mask,
- max77686->mask);
-}
-
-static void max77686_clk_unprepare(struct clk_hw *hw)
-{
- struct max77686_clk *max77686 = to_max77686_clk(hw);
-
- regmap_update_bits(max77686->iodev->regmap,
- MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
-}
-
-static int max77686_clk_is_prepared(struct clk_hw *hw)
-{
- struct max77686_clk *max77686 = to_max77686_clk(hw);
- int ret;
- u32 val;
-
- ret = regmap_read(max77686->iodev->regmap,
- MAX77686_REG_32KHZ, &val);
-
- if (ret < 0)
- return -EINVAL;
-
- return val & max77686->mask;
-}
-
-static unsigned long max77686_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return 32768;
-}
-
-static struct clk_ops max77686_clk_ops = {
- .prepare = max77686_clk_prepare,
- .unprepare = max77686_clk_unprepare,
- .is_prepared = max77686_clk_is_prepared,
- .recalc_rate = max77686_recalc_rate,
-};
+#include "clk-max-gen.h"
static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
[MAX77686_CLK_AP] = {
.name = "32khz_ap",
- .ops = &max77686_clk_ops,
+ .ops = &max_gen_clk_ops,
.flags = CLK_IS_ROOT,
},
[MAX77686_CLK_CP] = {
.name = "32khz_cp",
- .ops = &max77686_clk_ops,
+ .ops = &max_gen_clk_ops,
.flags = CLK_IS_ROOT,
},
[MAX77686_CLK_PMIC] = {
.name = "32khz_pmic",
- .ops = &max77686_clk_ops,
+ .ops = &max_gen_clk_ops,
.flags = CLK_IS_ROOT,
},
};
-static struct clk *max77686_clk_register(struct device *dev,
- struct max77686_clk *max77686)
-{
- struct clk *clk;
- struct clk_hw *hw = &max77686->hw;
-
- clk = clk_register(dev, hw);
- if (IS_ERR(clk))
- return clk;
-
- max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL);
- if (!max77686->lookup)
- return ERR_PTR(-ENOMEM);
-
- max77686->lookup->con_id = hw->init->name;
- max77686->lookup->clk = clk;
-
- clkdev_add(max77686->lookup);
-
- return clk;
-}
-
static int max77686_clk_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max77686_clk *max77686_clks[MAX77686_CLKS_NUM];
- struct clk **clocks;
- int i, ret;
-
- clocks = devm_kzalloc(&pdev->dev, sizeof(struct clk *)
- * MAX77686_CLKS_NUM, GFP_KERNEL);
- if (!clocks)
- return -ENOMEM;
-
- for (i = 0; i < MAX77686_CLKS_NUM; i++) {
- max77686_clks[i] = devm_kzalloc(&pdev->dev,
- sizeof(struct max77686_clk), GFP_KERNEL);
- if (!max77686_clks[i])
- return -ENOMEM;
- }
-
- for (i = 0; i < MAX77686_CLKS_NUM; i++) {
- max77686_clks[i]->iodev = iodev;
- max77686_clks[i]->mask = 1 << i;
- max77686_clks[i]->hw.init = &max77686_clks_init[i];
-
- clocks[i] = max77686_clk_register(&pdev->dev, max77686_clks[i]);
- if (IS_ERR(clocks[i])) {
- ret = PTR_ERR(clocks[i]);
- dev_err(&pdev->dev, "failed to register %s\n",
- max77686_clks[i]->hw.init->name);
- goto err_clocks;
- }
- }
-
- platform_set_drvdata(pdev, clocks);
-
- if (iodev->dev->of_node) {
- struct clk_onecell_data *of_data;
-
- of_data = devm_kzalloc(&pdev->dev,
- sizeof(*of_data), GFP_KERNEL);
- if (!of_data) {
- ret = -ENOMEM;
- goto err_clocks;
- }
- of_data->clks = clocks;
- of_data->clk_num = MAX77686_CLKS_NUM;
- ret = of_clk_add_provider(iodev->dev->of_node,
- of_clk_src_onecell_get, of_data);
- if (ret) {
- dev_err(&pdev->dev, "failed to register OF clock provider\n");
- goto err_clocks;
- }
- }
-
- return 0;
-
-err_clocks:
- for (--i; i >= 0; --i) {
- clkdev_drop(max77686_clks[i]->lookup);
- clk_unregister(max77686_clks[i]->hw.clk);
- }
-
- return ret;
+ return max_gen_clk_probe(pdev, iodev->regmap, MAX77686_REG_32KHZ,
+ max77686_clks_init, MAX77686_CLKS_NUM);
}
static int max77686_clk_remove(struct platform_device *pdev)
{
- struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct clk **clocks = platform_get_drvdata(pdev);
- int i;
-
- if (iodev->dev->of_node)
- of_clk_del_provider(iodev->dev->of_node);
-
- for (i = 0; i < MAX77686_CLKS_NUM; i++) {
- struct clk_hw *hw = __clk_get_hw(clocks[i]);
- struct max77686_clk *max77686 = to_max77686_clk(hw);
-
- clkdev_drop(max77686->lookup);
- clk_unregister(clocks[i]);
- }
- return 0;
+ return max_gen_clk_remove(pdev, MAX77686_CLKS_NUM);
}
static const struct platform_device_id max77686_clk_id[] = {
@@ -230,17 +80,7 @@ static struct platform_driver max77686_clk_driver = {
.id_table = max77686_clk_id,
};
-static int __init max77686_clk_init(void)
-{
- return platform_driver_register(&max77686_clk_driver);
-}
-subsys_initcall(max77686_clk_init);
-
-static void __init max77686_clk_cleanup(void)
-{
- platform_driver_unregister(&max77686_clk_driver);
-}
-module_exit(max77686_clk_cleanup);
+module_platform_driver(max77686_clk_driver);
MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
--
2.0.0.rc2
next prev parent reply other threads:[~2014-06-19 18:21 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-19 18:20 [PATCH v3 00/14] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-25 10:05 ` Krzysztof Kozlowski
2014-06-25 10:29 ` Javier Martinez Canillas
2014-06-25 17:24 ` Doug Anderson
2014-06-25 18:11 ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-25 10:18 ` Krzysztof Kozlowski
2014-06-19 18:20 ` [PATCH v3 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-25 10:19 ` Krzysztof Kozlowski
2014-06-25 18:06 ` Doug Anderson
2014-06-25 18:13 ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-25 14:19 ` Krzysztof Kozlowski
2014-06-25 14:36 ` Javier Martinez Canillas
2014-06-19 18:20 ` Javier Martinez Canillas [this message]
2014-06-25 14:30 ` [PATCH v3 06/14] clk: max77686: Convert to the generic max clock driver Krzysztof Kozlowski
2014-06-19 18:20 ` [PATCH v3 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 09/14] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 14/14] ARM: dts: Add max77802 device node for exynos5420-peach-pit Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403202040-12641-7-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=a.zummo@towertech.it \
--cc=broonie@kernel.org \
--cc=daniels@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=sameo@linux.intel.com \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).