linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: nick.dyer@itdev.co.uk
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Yufeng Shen <miletus@google.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan Bowens <Alan.Bowens@atmel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Benson Leung <bleung@chromium.org>,
	Olof Johansson <olofj@chromium.org>, Sekhar Nori <nsekhar@ti.com>,
	Stephen Warren <swarren@nvidia.com>,
	Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 04/15] Input: atmel_mxt_ts - implement device tree support
Date: Thu,  3 Jul 2014 16:01:26 +0100	[thread overview]
Message-ID: <1404399697-26484-5-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1404399697-26484-1-git-send-email-nick.dyer@itdev.co.uk>

From: Stephen Warren <swarren@nvidia.com>

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
---
 .../devicetree/bindings/input/atmel,maxtouch.txt   | 25 +++++++++++
 drivers/input/touchscreen/atmel_mxt_ts.c           | 48 ++++++++++++++++++++++
 2 files changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
new file mode 100644
index 0000000..60d6339
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -0,0 +1,25 @@
+Atmel maXTouch touchscreen/touchpad
+
+Required properties:
+- compatible:
+    atmel,maxtouch
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchpad's IRQ output
+    See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+    keycode generated by each GPIO. Linux keycodes are defined in
+    <dt-bindings/input/input.h>.
+
+Example:
+
+	touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio>;
+		interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	};
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 31113c3..5a095f6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -22,6 +22,7 @@
 #include <linux/i2c/atmel_mxt_ts.h>
 #include <linux/input/mt.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 
 /* Version */
@@ -1527,6 +1528,42 @@ static void mxt_input_close(struct input_dev *dev)
 	mxt_stop(data);
 }
 
+#ifdef CONFIG_OF
+static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	struct mxt_platform_data *pdata;
+	struct property *prop;
+	unsigned int *keymap;
+	int proplen, i, ret;
+	u32 keycode;
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	prop = of_find_property(client->dev.of_node, "linux,gpio-keymap",
+				&proplen);
+	if (prop) {
+		pdata->t19_num_keys = proplen / sizeof(u32);
+
+		keymap = devm_kzalloc(&client->dev,
+			pdata->t19_num_keys * sizeof(u32), GFP_KERNEL);
+		if (!keymap)
+			return NULL;
+		pdata->t19_keymap = keymap;
+		for (i = 0; i < pdata->t19_num_keys; i++) {
+			ret = of_property_read_u32_index(client->dev.of_node,
+					"linux,gpio-keymap", i, &keycode);
+			if (ret)
+				keycode = 0;
+			keymap[i] = keycode;
+		}
+	}
+
+	return pdata;
+}
+#endif
+
 static int mxt_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
@@ -1534,6 +1571,10 @@ static int mxt_probe(struct i2c_client *client,
 	const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev);
 	int error;
 
+#ifdef CONFIG_OF
+	if (!pdata && client->dev.of_node)
+		pdata = mxt_parse_dt(client);
+#endif
 	if (!pdata)
 		return -EINVAL;
 
@@ -1638,6 +1679,12 @@ static int mxt_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
 
+static const struct of_device_id mxt_of_match[] = {
+	{ .compatible = "atmel,maxtouch", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mxt_of_match);
+
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
@@ -1651,6 +1698,7 @@ static struct i2c_driver mxt_driver = {
 	.driver = {
 		.name	= "atmel_mxt_ts",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mxt_of_match),
 		.pm	= &mxt_pm_ops,
 	},
 	.probe		= mxt_probe,
-- 
2.0.1


  parent reply	other threads:[~2014-07-03 15:09 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-03 15:01 [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc nick.dyer
2014-07-03 15:01 ` [PATCH 01/15] Input: atmel_mxt_ts - initialise IRQ before probing nick.dyer
2014-07-03 15:01 ` [PATCH 02/15] Input: atmel_mxt_ts - move input device init into separate function nick.dyer
2014-07-03 15:01 ` [PATCH 03/15] Input: atmel_mxt_ts - set pointer emulation on touchpads nick.dyer
2014-07-03 15:01 ` nick.dyer [this message]
2014-07-22 20:37   ` [PATCH 04/15] Input: atmel_mxt_ts - implement device tree support Stephen Warren
2014-07-23 15:13     ` Nick Dyer
2014-07-23 21:36   ` Stephen Warren
2014-07-24 15:10     ` Nick Dyer
2014-07-24 16:04       ` Stephen Warren
2014-07-03 15:01 ` [PATCH 05/15] Input: atmel_mxt_ts - download device config using firmware loader nick.dyer
2014-07-03 15:01 ` [PATCH 06/15] Input: atmel_mxt_ts - calculate and check CRC in config file nick.dyer
2014-07-03 15:01 ` [PATCH 07/15] Input: atmel_mxt_ts - use deep sleep mode when stopped nick.dyer
2014-07-03 15:01 ` [PATCH 08/15] Input: atmel_mxt_ts - handle APP_CRC_FAIL on startup nick.dyer
2014-07-03 15:01 ` [PATCH 09/15] Input: atmel_mxt_ts - handle bootloader previously unlocked nick.dyer
2014-07-03 15:01 ` [PATCH 10/15] Input: atmel_mxt_ts - add bootloader addresses for new chips nick.dyer
2014-07-03 15:01 ` [PATCH 11/15] Input: atmel_mxt_ts - recover from bootloader on probe nick.dyer
2014-07-03 15:01 ` [PATCH 12/15] Input: atmel_mxt_ts - add support for dynamic message size nick.dyer
2014-07-03 15:01 ` [PATCH 13/15] Input: atmel_mxt_ts - decode T6 status messages nick.dyer
2014-07-03 15:01 ` [PATCH 14/15] Input: atmel_mxt_ts - split message handler into separate functions nick.dyer
2014-07-03 15:01 ` [PATCH 15/15] Input: atmel_mxt_ts - implement T44 message handling nick.dyer
2014-07-07 11:21 ` [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc Sekhar Nori
2014-07-07 11:38   ` Nick Dyer
2014-07-08 12:28     ` Sekhar Nori
2014-07-22 20:34 ` Stephen Warren
2014-07-23 15:30   ` Nick Dyer
2014-07-23 17:22     ` Stephen Warren
2014-07-23 20:29       ` Dmitry Torokhov
2014-07-23 21:39         ` Stephen Warren
2014-07-24 13:47       ` Nick Dyer
2014-07-24 21:19         ` Stephen Warren
2014-07-25 14:10           ` Nick Dyer
2014-07-25 20:06             ` Stephen Warren
2014-07-28 17:28               ` Dmitry Torokhov
2014-07-28 20:20               ` Yufeng Shen
2014-07-28 21:23                 ` Stephen Warren
2014-07-28 23:42                   ` Stephen Warren
2014-07-29  0:10                     ` Yufeng Shen
2014-07-29 16:16                       ` Stephen Warren
2014-07-29 17:06                         ` Nick Dyer
2014-07-29 19:26                           ` Stephen Warren
2014-09-02 15:45                             ` Stephen Warren
2014-07-29 16:43                       ` Nick Dyer
2014-07-29 16:26                     ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404399697-26484-5-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miletus@google.com \
    --cc=nsekhar@ti.com \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    --cc=swarren@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).