linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Murali Karicheri <m-karicheri2@ti.com>
To: <linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: Murali Karicheri <m-karicheri2@ti.com>,
	Russell King <linux@arm.linux.org.uk>,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Richard Zhu <r65037@freescale.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Marek Vasut <marex@denx.de>, Arnd Bergmann <arnd@arndb.de>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH v7 2/5] PCI: designware: refactor MSI code to work with v3.65 dw hardware
Date: Mon, 21 Jul 2014 12:58:42 -0400	[thread overview]
Message-ID: <1405961925-27248-3-git-send-email-m-karicheri2@ti.com> (raw)
In-Reply-To: <1405961925-27248-1-git-send-email-m-karicheri2@ti.com>

Keystone PCI controller is based on v3.65 version of the DW
PCI h/w that implements MSI controller registers in application
space compared to the newer version. This requires updates to
the DW core API to support the PCI controller driver based on
this old DW hardware. Add msi_irq_set()/clear() API functions to
allow Set/Clear MSI IRQ enable bit in the application register.
Also the old h/w uses MSI_IRQ register in application register
space to raise MSI IRQ to the RC from EP. Current code uses the
standard mechanism as per PCI spec. So add another API get_msi_data()
to get the address of this register so that common code can be
re-used on old h/w.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
---
 drivers/pci/host/pcie-designware.c |   50 ++++++++++++++++++++++++++----------
 drivers/pci/host/pcie-designware.h |    3 +++
 2 files changed, 39 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index d8f3af7..905941c 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -217,27 +217,47 @@ static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
 	return 0;
 }
 
+static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+{
+	unsigned int res, bit, val;
+
+	res = (irq / 32) * 12;
+	bit = irq % 32;
+	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+	val &= ~(1 << bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
 static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
 			    unsigned int nvec, unsigned int pos)
 {
-	unsigned int i, res, bit, val;
+	unsigned int i;
 
 	for (i = 0; i < nvec; i++) {
 		irq_set_msi_desc_off(irq_base, i, NULL);
 		clear_bit(pos + i, pp->msi_irq_in_use);
 		/* Disable corresponding interrupt on MSI controller */
-		res = ((pos + i) / 32) * 12;
-		bit = (pos + i) % 32;
-		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-		val &= ~(1 << bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+		if (pp->ops->msi_clear_irq)
+			pp->ops->msi_clear_irq(pp, pos + i);
+		else
+			dw_pcie_msi_clear_irq(pp, pos + i);
 	}
 }
 
+static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+{
+	unsigned int res, bit, val;
+
+	res = (irq / 32) * 12;
+	bit = irq % 32;
+	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+	val |= 1 << bit;
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 {
-	int res, bit, irq, pos0, pos1, i;
-	u32 val;
+	int irq, pos0, pos1, i;
 	struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
 
 	if (!pp) {
@@ -281,11 +301,10 @@ static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 		}
 		set_bit(pos0 + i, pp->msi_irq_in_use);
 		/*Enable corresponding interrupt in MSI interrupt controller */
-		res = ((pos0 + i) / 32) * 12;
-		bit = (pos0 + i) % 32;
-		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-		val |= 1 << bit;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+		if (pp->ops->msi_set_irq)
+			pp->ops->msi_set_irq(pp, pos0 + i);
+		else
+			dw_pcie_msi_set_irq(pp, pos0 + i);
 	}
 
 	*pos = pos0;
@@ -353,7 +372,10 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	 */
 	desc->msi_attrib.multiple = msgvec;
 
-	msg.address_lo = virt_to_phys((void *)pp->msi_data);
+	if (pp->ops->get_msi_data)
+		msg.address_lo = pp->ops->get_msi_data(pp);
+	else
+		msg.address_lo = virt_to_phys((void *)pp->msi_data);
 	msg.address_hi = 0x0;
 	msg.data = pos;
 	write_msi_msg(irq, &msg);
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 8121901..387f69e 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -67,6 +67,9 @@ struct pcie_host_ops {
 			unsigned int devfn, int where, int size, u32 val);
 	int (*link_up)(struct pcie_port *pp);
 	void (*host_init)(struct pcie_port *pp);
+	void (*msi_set_irq)(struct pcie_port *pp, int irq);
+	void (*msi_clear_irq)(struct pcie_port *pp, int irq);
+	u32 (*get_msi_data)(struct pcie_port *pp);
 };
 
 int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
-- 
1.7.9.5


  parent reply	other threads:[~2014-07-21 17:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-21 16:58 [PATCH v7 0/5] Add Keystone PCIe controller driver Murali Karicheri
2014-07-21 16:58 ` [PATCH v7 1/5] PCI: designware: add rd[wr]_other_conf API Murali Karicheri
2014-07-21 16:58 ` Murali Karicheri [this message]
2014-07-21 16:58 ` [PATCH v7 3/5] PCI: designware: enhance dw_pcie_host_init() to support v3.65 DW hardware Murali Karicheri
2014-07-23  1:27   ` Jingoo Han
2014-07-21 16:58 ` [PATCH v7 4/5] PCI: add PCI controller for keystone PCIe h/w Murali Karicheri
2014-07-22 22:35   ` Bjorn Helgaas
2014-07-22 22:52     ` Murali Karicheri
2014-07-22 23:52       ` Bjorn Helgaas
2014-07-23 17:42         ` Jason Gunthorpe
2014-07-30 19:34           ` Murali Karicheri
2014-07-30 20:05             ` Jason Gunthorpe
2014-08-06 14:38               ` Murali Karicheri
2014-07-21 16:58 ` [PATCH v7 5/5] PCI: keystone: Update maintainer information Murali Karicheri
2014-07-22 22:57 ` [PATCH v7 0/5] Add Keystone PCIe controller driver Bjorn Helgaas
2014-07-23 15:27   ` Murali Karicheri
2014-07-23 16:43     ` Bjorn Helgaas
2014-07-23 16:56       ` Murali Karicheri
2014-08-18 14:58       ` Murali Karicheri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1405961925-27248-3-git-send-email-m-karicheri2@ti.com \
    --to=m-karicheri2@ti.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=marex@denx.de \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=r65037@freescale.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).