[PATCH v5 0/2] mtd: nand: add sunxi NAND flash controller support

[PATCH v5 0/2] mtd: nand: add sunxi NAND flash controller support

[Boris BREZILLON]

Hi,

This patch series adds support for the sunxi NAND Flash Controller (NFC)
block.

These two patches only add support for the basic NAND stuff:
 - NAND controller operations
 - SW and HW ECC handling (with both syndrome and normal ECC scheme)

If you want support for advanced features you can find it on my github
repo [1]:
 - HW randomization support
 - per partition ECC/Randomizer to handle bootloader partitions

DMA transfers are not supported yet, but I have reworked the OOB layout
when using the HW ECC scheme to match the one used when accessing the NAND
with DMA transfers (the available OOB bytes are placed at the end of the
OOB area).

This patch series depends on this patch [2] adding support for ONFI timing
mode retrieval on non-ONFI NANDs.

Best Regards,

Boris

[1]https://github.com/bbrezillon/linux-sunxi/tree/sunxi-nand-v5
[2]https://patchwork.ozlabs.org/patch/391968/

Changes since v4:
 - adapt to v2 of "mtd: nand: support ONFI timing mode retrieval for non-ONFI
   NANDs" series

Changes since v3:
 - removed nand core code modifications from the patch series (submitted
   separately)
 - added documentation to the code
 - forced timeout (a default timeout is used when none is provided by the
   caller) on controller operations
 - fixed coding style issues
 - removed unneeded irq field from the sunxi_nfc struct
 - fixed several memory leaks
 - reworked the NFC reset code (to avoid potential garbage config from the
   bootloader)
 - made use of ECC_EXCEPTION flag to prevent erased page from generating
   ECC errors
 - changed the OOB layout for HW ECC scheme

Changes since v2:
 - merge HW ECC implementation in base implementation patch
 - fix timing config when interfacing with an ONFI compatible chip

Changes since v1:
 - add HW ECC support
 - rework NAND timings retrieval (use ONFI timing mode instead of raw timings)
 - add nand-ecc-level property to specify NAND ECC requirements from DT

Boris BREZILLON (2):
  mtd: nand: add sunxi NAND flash controller support
  mtd: nand: add sunxi NFC dt bindings doc

Boris BREZILLON (2):
  mtd: nand: add sunxi NAND flash controller support
  mtd: nand: add sunxi NFC dt bindings doc

 .../devicetree/bindings/mtd/sunxi-nand.txt         |   45 +
 drivers/mtd/nand/Kconfig                           |    6 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/sunxi_nand.c                      | 1362 ++++++++++++++++++++
 4 files changed, 1414 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/sunxi-nand.txt
 create mode 100644 drivers/mtd/nand/sunxi_nand.c

-- 
1.9.1

[PATCH v5 1/2] mtd: nand: add sunxi NAND flash controller support

[Boris BREZILLON]

Add support for the sunxi NAND Flash Controller (NFC).

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
---
 drivers/mtd/nand/Kconfig      |    6 +
 drivers/mtd/nand/Makefile     |    1 +
 drivers/mtd/nand/sunxi_nand.c | 1362 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1369 insertions(+)
 create mode 100644 drivers/mtd/nand/sunxi_nand.c

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f1cf503..bd94d12 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -513,4 +513,10 @@ config MTD_NAND_XWAY
 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
 	  to the External Bus Unit (EBU).
 
+config MTD_NAND_SUNXI
+	tristate "Support for NAND on Allwinner SoCs"
+	depends on ARCH_SUNXI
+	help
+	  Enables support for NAND Flash chips on Allwinner SoCs.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a035e7c..ff56eaf 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
 obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
 obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
+obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
 
 nand-objs := nand_base.o nand_bbt.o nand_timings.o
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
new file mode 100644
index 0000000..4fcecfb
--- /dev/null
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -0,0 +1,1362 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon.dev@gmail.com>
+ *
+ * Derived from:
+ *	https://github.com/yuq/sunxi-nfc-mtd
+ *	Copyright (C) 2013 Qiang Yu <yuq825@gmail.com>
+ *
+ *	https://github.com/hno/Allwinner-Info
+ *	Copyright (C) 2013 Henrik Nordström <Henrik Nordström>
+ *
+ *	Copyright (C) 2013 Dmitriy B. <rzk333@gmail.com>
+ *	Copyright (C) 2013 Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
+
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define NFC_REG_CTL		0x0000
+#define NFC_REG_ST		0x0004
+#define NFC_REG_INT		0x0008
+#define NFC_REG_TIMING_CTL	0x000C
+#define NFC_REG_TIMING_CFG	0x0010
+#define NFC_REG_ADDR_LOW	0x0014
+#define NFC_REG_ADDR_HIGH	0x0018
+#define NFC_REG_SECTOR_NUM	0x001C
+#define NFC_REG_CNT		0x0020
+#define NFC_REG_CMD		0x0024
+#define NFC_REG_RCMD_SET	0x0028
+#define NFC_REG_WCMD_SET	0x002C
+#define NFC_REG_IO_DATA		0x0030
+#define NFC_REG_ECC_CTL		0x0034
+#define NFC_REG_ECC_ST		0x0038
+#define NFC_REG_DEBUG		0x003C
+#define NFC_REG_ECC_CNT0	0x0040
+#define NFC_REG_ECC_CNT1	0x0044
+#define NFC_REG_ECC_CNT2	0x0048
+#define NFC_REG_ECC_CNT3	0x004c
+#define NFC_REG_USER_DATA_BASE	0x0050
+#define NFC_REG_SPARE_AREA	0x00A0
+#define NFC_RAM0_BASE		0x0400
+#define NFC_RAM1_BASE		0x0800
+
+/* define bit use in NFC_CTL */
+#define NFC_EN			BIT(0)
+#define NFC_RESET		BIT(1)
+#define NFC_BUS_WIDYH		BIT(2)
+#define NFC_RB_SEL		BIT(3)
+#define NFC_CE_SEL		GENMASK(26, 24)
+#define NFC_CE_CTL		BIT(6)
+#define NFC_CE_CTL1		BIT(7)
+#define NFC_PAGE_SIZE		GENMASK(11, 8)
+#define NFC_SAM			BIT(12)
+#define NFC_RAM_METHOD		BIT(14)
+#define NFC_DEBUG_CTL		BIT(31)
+
+/* define bit use in NFC_ST */
+#define NFC_RB_B2R		BIT(0)
+#define NFC_CMD_INT_FLAG	BIT(1)
+#define NFC_DMA_INT_FLAG	BIT(2)
+#define NFC_CMD_FIFO_STATUS	BIT(3)
+#define NFC_STA			BIT(4)
+#define NFC_NATCH_INT_FLAG	BIT(5)
+#define NFC_RB_STATE0		BIT(8)
+#define NFC_RB_STATE1		BIT(9)
+#define NFC_RB_STATE2		BIT(10)
+#define NFC_RB_STATE3		BIT(11)
+
+/* define bit use in NFC_INT */
+#define NFC_B2R_INT_ENABLE	BIT(0)
+#define NFC_CMD_INT_ENABLE	BIT(1)
+#define NFC_DMA_INT_ENABLE	BIT(2)
+#define NFC_INT_MASK		(NFC_B2R_INT_ENABLE | \
+				 NFC_CMD_INT_ENABLE | \
+				 NFC_DMA_INT_ENABLE)
+
+/* define bit use in NFC_CMD */
+#define NFC_CMD_LOW_BYTE	GENMASK(7, 0)
+#define NFC_CMD_HIGH_BYTE	GENMASK(15, 8)
+#define NFC_ADR_NUM		GENMASK(18, 16)
+#define NFC_SEND_ADR		BIT(19)
+#define NFC_ACCESS_DIR		BIT(20)
+#define NFC_DATA_TRANS		BIT(21)
+#define NFC_SEND_CMD1		BIT(22)
+#define NFC_WAIT_FLAG		BIT(23)
+#define NFC_SEND_CMD2		BIT(24)
+#define NFC_SEQ			BIT(25)
+#define NFC_DATA_SWAP_METHOD	BIT(26)
+#define NFC_ROW_AUTO_INC	BIT(27)
+#define NFC_SEND_CMD3		BIT(28)
+#define NFC_SEND_CMD4		BIT(29)
+#define NFC_CMD_TYPE		GENMASK(31, 30)
+
+/* define bit use in NFC_RCMD_SET */
+#define NFC_READ_CMD		GENMASK(7, 0)
+#define NFC_RANDOM_READ_CMD0	GENMASK(15, 8)
+#define NFC_RANDOM_READ_CMD1	GENMASK(23, 16)
+
+/* define bit use in NFC_WCMD_SET */
+#define NFC_PROGRAM_CMD		GENMASK(7, 0)
+#define NFC_RANDOM_WRITE_CMD	GENMASK(15, 8)
+#define NFC_READ_CMD0		GENMASK(23, 16)
+#define NFC_READ_CMD1		GENMASK(31, 24)
+
+/* define bit use in NFC_ECC_CTL */
+#define NFC_ECC_EN		BIT(0)
+#define NFC_ECC_PIPELINE	BIT(3)
+#define NFC_ECC_EXCEPTION	BIT(4)
+#define NFC_ECC_BLOCK_SIZE	BIT(5)
+#define NFC_RANDOM_EN		BIT(9)
+#define NFC_RANDOM_DIRECTION	BIT(10)
+#define NFC_ECC_MODE_SHIFT	12
+#define NFC_ECC_MODE		GENMASK(15, 12)
+#define NFC_RANDOM_SEED		GENMASK(30, 16)
+
+#define DEFAULT_NAME_FORMAT	"nand@%d"
+#define MAX_NAME_SIZE		(sizeof("nand@") + 2)
+
+#define NFC_DEFAULT_TIMEOUT_MS	1000
+
+/*
+ * Ready/Busy detection type: describes the Ready/Busy detection modes
+ *
+ * @RB_NONE:	no external detection available, rely on STATUS command
+ *		and software timeouts
+ * @RB_NATIVE:	use sunxi NAND controller Ready/Busy support. The Ready/Busy
+ *		pin of the NAND flash chip must be connected to one of the
+ *		native NAND R/B pins (those which can be muxed to the NAND
+ *		Controller)
+ * @RB_GPIO:	use a simple GPIO to handle Ready/Busy status. The Ready/Busy
+ *		pin of the NAND flash chip must be connected to a GPIO capable
+ *		pin.
+ */
+enum sunxi_nand_rb_type {
+	RB_NONE,
+	RB_NATIVE,
+	RB_GPIO,
+};
+
+/*
+ * Ready/Busy structure: stores informations related to Ready/Busy detection
+ *
+ * @type:	the Ready/Busy detection mode
+ * @info:	information related to the R/B detection mode. Either a gpio
+ *		id or a native R/B id (those supported by the NAND controller).
+ */
+struct sunxi_nand_rb {
+	enum sunxi_nand_rb_type type;
+	union {
+		int gpio;
+		int nativeid;
+	} info;
+};
+
+/*
+ * Chip Select structure: stores informations related to NAND Chip Select
+ *
+ * @cs:		the NAND CS id used to communicate with a NAND Chip
+ * @rb:		the Ready/Busy description
+ */
+struct sunxi_nand_chip_sel {
+	u8 cs;
+	struct sunxi_nand_rb rb;
+};
+
+/*
+ * sunxi HW ECC infos: stores informations related to HW ECC support
+ *
+ * @mode:	the sunxi ECC mode field deduced from ECC requirements
+ * @layout:	the OOB layout depending on the ECC requirements and the
+ *		selected ECC mode
+ */
+struct sunxi_nand_hw_ecc {
+	int mode;
+	struct nand_ecclayout layout;
+};
+
+/*
+ * NAND chip structure: stores NAND chip device related informations
+ *
+ * @node:		used to store NAND chips into a list
+ * @nand:		base NAND chip structure
+ * @mtd:		base MTD structure
+ * @default_name:	name used if no name was provided by the DT
+ * @clk_rate:		clk_rate required for this NAND chip
+ * @selected:		current active CS
+ * @nsels:		number of CS lines required by the NAND chip
+ * @sels:		array of CS lines descriptions
+ */
+struct sunxi_nand_chip {
+	struct list_head node;
+	struct nand_chip nand;
+	struct mtd_info mtd;
+	char default_name[MAX_NAME_SIZE];
+	unsigned long clk_rate;
+	int selected;
+	int nsels;
+	struct sunxi_nand_chip_sel sels[0];
+};
+
+static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
+{
+	return container_of(nand, struct sunxi_nand_chip, nand);
+}
+
+/*
+ * NAND Controller structure: stores sunxi NAND controller informations
+ *
+ * @controller:		base controller structure
+ * @regs:		NAND controller registers
+ * @ahb_clk:		NAND Controller AHB clock
+ * @mod_clk:		NAND Controller mod clock
+ * @assigned_cs:	bitmask describing already assigned CS lines
+ * @clk_rate:		NAND controller current clock rate
+ * @chips:		a list containing all the NAND chips attached to
+ *			this NAND controller
+ * @complete:		a completion object used to wait for NAND
+ *			controller events
+ */
+struct sunxi_nfc {
+	struct nand_hw_control controller;
+	void __iomem *regs;
+	struct clk *ahb_clk;
+	struct clk *mod_clk;
+	unsigned long assigned_cs;
+	unsigned long clk_rate;
+	struct list_head chips;
+	struct completion complete;
+};
+
+static inline struct sunxi_nfc *to_sunxi_nfc(struct nand_hw_control *ctrl)
+{
+	return container_of(ctrl, struct sunxi_nfc, controller);
+}
+
+static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id)
+{
+	struct sunxi_nfc *nfc = dev_id;
+	u32 st = readl(nfc->regs + NFC_REG_ST);
+	u32 ien = readl(nfc->regs + NFC_REG_INT);
+
+	if (!(ien & st))
+		return IRQ_NONE;
+
+	if ((ien & st) == ien)
+		complete(&nfc->complete);
+
+	writel(st & NFC_INT_MASK, nfc->regs + NFC_REG_ST);
+	writel(~st & ien & NFC_INT_MASK, nfc->regs + NFC_REG_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags,
+			      unsigned int timeout_ms)
+{
+	init_completion(&nfc->complete);
+
+	writel(flags, nfc->regs + NFC_REG_INT);
+
+	if (!timeout_ms)
+		timeout_ms = NFC_DEFAULT_TIMEOUT_MS;
+
+	if (!wait_for_completion_timeout(&nfc->complete,
+					 msecs_to_jiffies(timeout_ms)))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc)
+{
+	unsigned long timeout = jiffies +
+				msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+
+	while ((readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS) &&
+	       time_before(jiffies, timeout))
+		;
+}
+
+static void sunxi_nfc_rst(struct sunxi_nfc *nfc)
+{
+	unsigned long timeout = jiffies +
+				msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+
+	writel(0, nfc->regs + NFC_REG_ECC_CTL);
+	writel(NFC_RESET, nfc->regs + NFC_REG_CTL);
+	while ((readl(nfc->regs + NFC_REG_CTL) & NFC_RESET) &&
+	       time_before(jiffies, timeout))
+		;
+}
+
+static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+	struct sunxi_nand_rb *rb;
+	unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20);
+	int ret;
+
+	if (sunxi_nand->selected < 0)
+		return 0;
+
+	rb = &sunxi_nand->sels[sunxi_nand->selected].rb;
+
+	switch (rb->type) {
+	case RB_NATIVE:
+		ret = !!(readl(nfc->regs + NFC_REG_ST) &
+			 (NFC_RB_STATE0 << rb->info.nativeid));
+		if (ret)
+			break;
+
+		sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo);
+		ret = !!(readl(nfc->regs + NFC_REG_ST) &
+			 (NFC_RB_STATE0 << rb->info.nativeid));
+		break;
+	case RB_GPIO:
+		ret = gpio_get_value(rb->info.gpio);
+		break;
+	case RB_NONE:
+	default:
+		ret = 0;
+		pr_err("cannot check R/B NAND status!");
+		break;
+	}
+
+	return ret;
+}
+
+static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+	struct sunxi_nand_chip_sel *sel;
+	u32 ctl;
+
+	if (chip > 0 && chip >= sunxi_nand->nsels)
+		return;
+
+	if (chip == sunxi_nand->selected)
+		return;
+
+	ctl = readl(nfc->regs + NFC_REG_CTL) &
+	      ~(NFC_CE_SEL | NFC_RB_SEL | NFC_EN);
+
+	if (chip >= 0) {
+		sel = &sunxi_nand->sels[chip];
+
+		ctl |= (sel->cs << 24) | NFC_EN |
+		       (((nand->page_shift - 10) & 0xf) << 8);
+		if (sel->rb.type == RB_NONE) {
+			nand->dev_ready = NULL;
+		} else {
+			nand->dev_ready = sunxi_nfc_dev_ready;
+			if (sel->rb.type == RB_NATIVE)
+				ctl |= (sel->rb.info.nativeid << 3);
+		}
+
+		writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA);
+
+		if (nfc->clk_rate != sunxi_nand->clk_rate) {
+			clk_set_rate(nfc->mod_clk, sunxi_nand->clk_rate);
+			nfc->clk_rate = sunxi_nand->clk_rate;
+		}
+	}
+
+	writel(ctl, nfc->regs + NFC_REG_CTL);
+
+	sunxi_nand->selected = chip;
+}
+
+static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+	int cnt;
+	int offs = 0;
+	u32 tmp;
+
+	while (len > offs) {
+		cnt = len - offs;
+		if (cnt > 1024)
+			cnt = 1024;
+
+		sunxi_nfc_wait_cmd_fifo_empty(nfc);
+		writel(cnt, nfc->regs + NFC_REG_CNT);
+		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
+		writel(tmp, nfc->regs + NFC_REG_CMD);
+		sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+		if (buf)
+			memcpy_fromio(buf + offs, nfc->regs + NFC_RAM0_BASE,
+				      cnt);
+		offs += cnt;
+	}
+}
+
+static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+				int len)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+	int cnt;
+	int offs = 0;
+	u32 tmp;
+
+	while (len > offs) {
+		cnt = len - offs;
+		if (cnt > 1024)
+			cnt = 1024;
+
+		sunxi_nfc_wait_cmd_fifo_empty(nfc);
+		writel(cnt, nfc->regs + NFC_REG_CNT);
+		memcpy_toio(nfc->regs + NFC_RAM0_BASE, buf + offs, cnt);
+		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
+		      NFC_ACCESS_DIR;
+		writel(tmp, nfc->regs + NFC_REG_CMD);
+		sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+		offs += cnt;
+	}
+}
+
+static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd)
+{
+	uint8_t ret;
+
+	sunxi_nfc_read_buf(mtd, &ret, 1);
+
+	return ret;
+}
+
+static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
+			       unsigned int ctrl)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+	u32 tmp;
+
+	sunxi_nfc_wait_cmd_fifo_empty(nfc);
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		tmp = readl(nfc->regs + NFC_REG_CTL);
+		if (ctrl & NAND_NCE)
+			tmp |= NFC_CE_CTL;
+		else
+			tmp &= ~NFC_CE_CTL;
+		writel(tmp, nfc->regs + NFC_REG_CTL);
+	}
+
+	if (dat == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE) {
+		writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD);
+	} else {
+		writel(dat, nfc->regs + NFC_REG_ADDR_LOW);
+		writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD);
+	}
+
+	sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+}
+
+static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
+				      struct nand_chip *chip, uint8_t *buf,
+				      int oob_required, int page)
+{
+	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct nand_ecclayout *layout = ecc->layout;
+	struct sunxi_nand_hw_ecc *data = ecc->priv;
+	int steps = mtd->writesize / ecc->size;
+	unsigned int max_bitflips = 0;
+	int offset;
+	u32 tmp;
+	int i;
+	int cnt;
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+	tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+	       NFC_ECC_EXCEPTION;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	for (i = 0; i < steps; i++) {
+		if (i)
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, i * ecc->size, -1);
+
+		offset = mtd->writesize + layout->eccpos[i * ecc->bytes] - 4;
+
+		chip->read_buf(mtd, NULL, ecc->size);
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+		sunxi_nfc_wait_cmd_fifo_empty(nfc);
+
+		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30);
+		writel(tmp, nfc->regs + NFC_REG_CMD);
+		sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+		memcpy_fromio(buf + (i * ecc->size),
+			      nfc->regs + NFC_RAM0_BASE, ecc->size);
+
+		if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) {
+			mtd->ecc_stats.failed++;
+		} else {
+			tmp = readl(nfc->regs + NFC_REG_ECC_CNT0) & 0xff;
+			mtd->ecc_stats.corrected += tmp;
+			max_bitflips = max_t(unsigned int, max_bitflips, tmp);
+		}
+
+		if (oob_required) {
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			sunxi_nfc_wait_cmd_fifo_empty(nfc);
+			offset -= mtd->writesize;
+			chip->read_buf(mtd, chip->oob_poi + offset,
+				      ecc->bytes + 4);
+		}
+	}
+
+	if (oob_required) {
+		cnt = ecc->layout->oobfree[steps].length;
+		if (cnt > 0) {
+			offset = mtd->writesize +
+				 ecc->layout->oobfree[steps].offset;
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			offset -= mtd->writesize;
+			chip->read_buf(mtd, chip->oob_poi + offset, cnt);
+		}
+	}
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~NFC_ECC_EN;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	return max_bitflips;
+}
+
+static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
+				       struct nand_chip *chip,
+				       const uint8_t *buf, int oob_required)
+{
+	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct nand_ecclayout *layout = ecc->layout;
+	struct sunxi_nand_hw_ecc *data = ecc->priv;
+	int offset;
+	u32 tmp;
+	int i;
+	int cnt;
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+	tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+	       NFC_ECC_EXCEPTION;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	for (i = 0; i < mtd->writesize / ecc->size; i++) {
+		if (i)
+			chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1);
+
+		chip->write_buf(mtd, buf + (i * ecc->size), ecc->size);
+
+		offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
+
+		/* Fill OOB data in */
+		if (oob_required) {
+			tmp = 0xffffffff;
+			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
+				    4);
+		} else {
+			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE,
+				    chip->oob_poi + offset - mtd->writesize,
+				    4);
+		}
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
+		sunxi_nfc_wait_cmd_fifo_empty(nfc);
+
+		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
+		      (1 << 30);
+		writel(tmp, nfc->regs + NFC_REG_CMD);
+		sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+	}
+
+	if (oob_required) {
+		cnt = ecc->layout->oobfree[i].length;
+		if (cnt > 0) {
+			offset = mtd->writesize +
+				 ecc->layout->oobfree[i].offset;
+			chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
+			offset -= mtd->writesize;
+			chip->write_buf(mtd, chip->oob_poi + offset, cnt);
+		}
+	}
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~NFC_ECC_EN;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	return 0;
+}
+
+static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
+					       struct nand_chip *chip,
+					       uint8_t *buf, int oob_required,
+					       int page)
+{
+	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct sunxi_nand_hw_ecc *data = ecc->priv;
+	int steps = mtd->writesize / ecc->size;
+	unsigned int max_bitflips = 0;
+	uint8_t *oob = chip->oob_poi;
+	int offset = 0;
+	int cnt;
+	u32 tmp;
+	int i;
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+	tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+	       NFC_ECC_EXCEPTION;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	for (i = 0; i < steps; i++) {
+		chip->read_buf(mtd, NULL, ecc->size);
+
+		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30);
+		writel(tmp, nfc->regs + NFC_REG_CMD);
+		sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+		memcpy_fromio(buf, nfc->regs + NFC_RAM0_BASE, ecc->size);
+		buf += ecc->size;
+		offset += ecc->size;
+
+		if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) {
+			mtd->ecc_stats.failed++;
+		} else {
+			tmp = readl(nfc->regs + NFC_REG_ECC_CNT0) & 0xff;
+			mtd->ecc_stats.corrected += tmp;
+			max_bitflips = max_t(unsigned int, max_bitflips, tmp);
+		}
+
+		if (oob_required) {
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			chip->read_buf(mtd, oob, ecc->bytes + ecc->prepad);
+			oob += ecc->bytes + ecc->prepad;
+		}
+
+		offset += ecc->bytes + ecc->prepad;
+	}
+
+	if (oob_required) {
+		cnt = mtd->oobsize - (oob - chip->oob_poi);
+		if (cnt > 0) {
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			chip->read_buf(mtd, oob, cnt);
+		}
+	}
+
+	writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN,
+	       nfc->regs + NFC_REG_ECC_CTL);
+
+	return max_bitflips;
+}
+
+static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
+						struct nand_chip *chip,
+						const uint8_t *buf,
+						int oob_required)
+{
+	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct sunxi_nand_hw_ecc *data = ecc->priv;
+	int steps = mtd->writesize / ecc->size;
+	uint8_t *oob = chip->oob_poi;
+	int offset = 0;
+	int cnt;
+	u32 tmp;
+	int i;
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
+	tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
+	       NFC_ECC_EXCEPTION;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	for (i = 0; i < steps; i++) {
+		chip->write_buf(mtd, buf + (i * ecc->size), ecc->size);
+		offset += ecc->size;
+
+		/* Fill OOB data in */
+		if (oob_required) {
+			tmp = 0xffffffff;
+			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
+				    4);
+		} else {
+			memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob ,
+				    4);
+		}
+
+		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
+		      (1 << 30);
+		writel(tmp, nfc->regs + NFC_REG_CMD);
+		sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+
+		offset += ecc->bytes + ecc->prepad;
+		oob += ecc->bytes + ecc->prepad;
+	}
+
+	if (oob_required) {
+		cnt = mtd->oobsize - (oob - chip->oob_poi);
+		if (cnt > 0) {
+			chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
+			chip->write_buf(mtd, oob, cnt);
+		}
+	}
+
+	tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
+	tmp &= ~NFC_ECC_EN;
+
+	writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
+
+	return 0;
+}
+
+static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
+				       const struct nand_sdr_timings *timings)
+{
+	u32 min_clk_period = 0;
+
+	/* T1 <=> tCLS */
+	if (timings->tCLS_min > min_clk_period)
+		min_clk_period = timings->tCLS_min;
+
+	/* T2 <=> tCLH */
+	if (timings->tCLH_min > min_clk_period)
+		min_clk_period = timings->tCLH_min;
+
+	/* T3 <=> tCS */
+	if (timings->tCS_min > min_clk_period)
+		min_clk_period = timings->tCS_min;
+
+	/* T4 <=> tCH */
+	if (timings->tCH_min > min_clk_period)
+		min_clk_period = timings->tCH_min;
+
+	/* T5 <=> tWP */
+	if (timings->tWP_min > min_clk_period)
+		min_clk_period = timings->tWP_min;
+
+	/* T6 <=> tWH */
+	if (timings->tWH_min > min_clk_period)
+		min_clk_period = timings->tWH_min;
+
+	/* T7 <=> tALS */
+	if (timings->tALS_min > min_clk_period)
+		min_clk_period = timings->tALS_min;
+
+	/* T8 <=> tDS */
+	if (timings->tDS_min > min_clk_period)
+		min_clk_period = timings->tDS_min;
+
+	/* T9 <=> tDH */
+	if (timings->tDH_min > min_clk_period)
+		min_clk_period = timings->tDH_min;
+
+	/* T10 <=> tRR */
+	if (timings->tRR_min > (min_clk_period * 3))
+		min_clk_period = (timings->tRR_min + 2) / 3;
+
+	/* T11 <=> tALH */
+	if (timings->tALH_min > min_clk_period)
+		min_clk_period = timings->tALH_min;
+
+	/* T12 <=> tRP */
+	if (timings->tRP_min > min_clk_period)
+		min_clk_period = timings->tRP_min;
+
+	/* T13 <=> tREH */
+	if (timings->tREH_min > min_clk_period)
+		min_clk_period = timings->tREH_min;
+
+	/* T14 <=> tRC */
+	if (timings->tRC_min > (min_clk_period * 2))
+		min_clk_period = (timings->tRC_min + 1) / 2;
+
+	/* T15 <=> tWC */
+	if (timings->tWC_min > (min_clk_period * 2))
+		min_clk_period = (timings->tWC_min + 1) / 2;
+
+
+	/* min_clk_period = (NAND-clk-period * 2) */
+	if (min_clk_period < 1000)
+		min_clk_period = 1000;
+
+	min_clk_period /= 1000;
+	chip->clk_rate = (2 * 1000000000) / min_clk_period;
+
+	/* TODO: configure T16-T19 */
+
+	return 0;
+}
+
+static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
+					struct device_node *np)
+{
+	const struct nand_sdr_timings *timings;
+	int ret;
+	int mode;
+
+	mode = onfi_get_async_timing_mode(&chip->nand);
+	if (mode == ONFI_TIMING_MODE_UNKNOWN) {
+		mode = chip->nand.onfi_timing_mode_default;
+	} else {
+		uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
+
+		mode = fls(mode) - 1;
+		if (mode < 0)
+			mode = 0;
+
+		feature[0] = mode;
+		ret = chip->nand.onfi_set_features(&chip->mtd, &chip->nand,
+						ONFI_FEATURE_ADDR_TIMING_MODE,
+						feature);
+		if (ret)
+			return ret;
+	}
+
+	timings = onfi_async_timing_mode_to_sdr_timings(mode);
+	if (IS_ERR(timings))
+		return PTR_ERR(timings);
+
+	return sunxi_nand_chip_set_timings(chip, timings);
+}
+
+static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
+					      struct nand_ecc_ctrl *ecc,
+					      struct device_node *np)
+{
+	struct sunxi_nand_hw_ecc *data;
+	struct nand_ecclayout *layout;
+	int nsectors;
+	int ret;
+
+	if (!ecc->strength || !ecc->size)
+		return -EINVAL;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* Add ECC info retrieval from DT */
+	if (ecc->strength <= 16) {
+		ecc->strength = 16;
+		data->mode = 0;
+	} else if (ecc->strength <= 24) {
+		ecc->strength = 24;
+		data->mode = 1;
+	} else if (ecc->strength <= 28) {
+		ecc->strength = 28;
+		data->mode = 2;
+	} else if (ecc->strength <= 32) {
+		ecc->strength = 32;
+		data->mode = 3;
+	} else if (ecc->strength <= 40) {
+		ecc->strength = 40;
+		data->mode = 4;
+	} else if (ecc->strength <= 48) {
+		ecc->strength = 48;
+		data->mode = 5;
+	} else if (ecc->strength <= 56) {
+		ecc->strength = 56;
+		data->mode = 6;
+	} else if (ecc->strength <= 60) {
+		ecc->strength = 60;
+		data->mode = 7;
+	} else if (ecc->strength <= 64) {
+		ecc->strength = 64;
+		data->mode = 8;
+	} else {
+		pr_err("unsupported strength\n");
+		ret = -ENOTSUPP;
+		goto err;
+	}
+
+	/* HW ECC always request ECC bytes for 1024 bytes blocks */
+	ecc->bytes = ((ecc->strength * fls(8 * 1024)) + 7) / 8;
+
+	/* HW ECC always work with even numbers of ECC bytes */
+	if (ecc->bytes % 2)
+		ecc->bytes++;
+
+	layout = &data->layout;
+	nsectors = mtd->writesize / ecc->size;
+
+	if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	layout->eccbytes = (ecc->bytes * nsectors);
+
+	ecc->layout = layout;
+	ecc->priv = data;
+
+	return 0;
+
+err:
+	kfree(data);
+
+	return ret;
+}
+
+static void sunxi_nand_hw_common_ecc_ctrl_cleanup(struct nand_ecc_ctrl *ecc)
+{
+	kfree(ecc->priv);
+}
+
+static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
+				       struct nand_ecc_ctrl *ecc,
+				       struct device_node *np)
+{
+	struct nand_ecclayout *layout;
+	int nsectors;
+	int i, j;
+	int ret;
+
+	ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
+	if (ret)
+		return ret;
+
+	ecc->read_page = sunxi_nfc_hw_ecc_read_page;
+	ecc->write_page = sunxi_nfc_hw_ecc_write_page;
+	layout = ecc->layout;
+	nsectors = mtd->writesize / ecc->size;
+
+	for (i = 0; i < nsectors; i++) {
+		if (i) {
+			layout->oobfree[i].offset =
+				layout->oobfree[i - 1].offset +
+				layout->oobfree[i - 1].length +
+				ecc->bytes;
+			layout->oobfree[i].length = 4;
+		} else {
+			/*
+			 * The first 2 bytes are used for BB markers, hence we
+			 * only have 2 bytes available in the first user data
+			 * section.
+			 */
+			layout->oobfree[i].length = 2;
+			layout->oobfree[i].offset = 2;
+		}
+
+		for (j = 0; j < ecc->bytes; j++)
+			layout->eccpos[(ecc->bytes * i) + j] =
+					layout->oobfree[i].offset +
+					layout->oobfree[i].length + j;
+	}
+
+	if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
+		layout->oobfree[nsectors].offset =
+				layout->oobfree[nsectors - 1].offset +
+				layout->oobfree[nsectors - 1].length +
+				ecc->bytes;
+		layout->oobfree[nsectors].length = mtd->oobsize -
+				((ecc->bytes + 4) * nsectors);
+	}
+
+	return 0;
+}
+
+static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
+						struct nand_ecc_ctrl *ecc,
+						struct device_node *np)
+{
+	struct nand_ecclayout *layout;
+	int nsectors;
+	int i;
+	int ret;
+
+	ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
+	if (ret)
+		return ret;
+
+	ecc->prepad = 4;
+	ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
+	ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
+
+	layout = ecc->layout;
+	nsectors = mtd->writesize / ecc->size;
+
+	for (i = 0; i < (ecc->bytes * nsectors); i++)
+		layout->eccpos[i] = i;
+
+	layout->oobfree[0].length = mtd->oobsize - i;
+	layout->oobfree[0].offset = i;
+
+	return 0;
+}
+
+static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
+{
+	switch (ecc->mode) {
+	case NAND_ECC_HW:
+	case NAND_ECC_HW_SYNDROME:
+		sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
+		break;
+	default:
+		break;
+	}
+}
+
+static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
+			       struct device_node *np)
+{
+	struct nand_chip *nand = mtd->priv;
+	u32 strength;
+	u32 blk_size;
+	int ret;
+
+	if (!of_property_read_u32(np, "nand-ecc-step-size", &blk_size) &&
+	    !of_property_read_u32(np, "nand-ecc-strength", &strength)) {
+		ecc->size = blk_size;
+		ecc->strength = strength;
+	} else {
+		ecc->size = nand->ecc_step_ds;
+		ecc->strength = nand->ecc_strength_ds;
+	}
+
+	ecc->mode = NAND_ECC_HW;
+
+	ret = of_get_nand_ecc_mode(np);
+	if (ret >= 0)
+		ecc->mode = ret;
+
+	switch (ecc->mode) {
+	case NAND_ECC_SOFT_BCH:
+		if (!ecc->size || !ecc->strength)
+			return -EINVAL;
+		ecc->bytes = ((ecc->strength * fls(8 * ecc->size)) + 7) / 8;
+		break;
+	case NAND_ECC_HW:
+		ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
+		if (ret)
+			return ret;
+		break;
+	case NAND_ECC_HW_SYNDROME:
+		ret = sunxi_nand_hw_syndrome_ecc_ctrl_init(mtd, ecc, np);
+		if (ret)
+			return ret;
+		break;
+	case NAND_ECC_NONE:
+	case NAND_ECC_SOFT:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
+				struct device_node *np)
+{
+	const struct nand_sdr_timings *timings;
+	struct sunxi_nand_chip *chip;
+	struct mtd_part_parser_data ppdata;
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	int nsels;
+	int ret;
+	int i;
+	u32 tmp;
+
+	if (!of_get_property(np, "reg", &nsels))
+		return -EINVAL;
+
+	nsels /= sizeof(u32);
+	if (!nsels)
+		return -EINVAL;
+
+	chip = devm_kzalloc(dev,
+			    sizeof(*chip) +
+			    (nsels * sizeof(struct sunxi_nand_chip_sel)),
+			    GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->nsels = nsels;
+	chip->selected = -1;
+
+	for (i = 0; i < nsels; i++) {
+		ret = of_property_read_u32_index(np, "reg", i, &tmp);
+		if (ret)
+			return ret;
+
+		if (tmp > 7)
+			return -EINVAL;
+
+		if (test_and_set_bit(tmp, &nfc->assigned_cs))
+			return -EINVAL;
+
+		chip->sels[i].cs = tmp;
+
+		if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) &&
+		    tmp < 2) {
+			chip->sels[i].rb.type = RB_NATIVE;
+			chip->sels[i].rb.info.nativeid = tmp;
+		} else {
+			ret = of_get_named_gpio(np, "rb-gpios", i);
+			if (ret >= 0) {
+				tmp = ret;
+				chip->sels[i].rb.type = RB_GPIO;
+				chip->sels[i].rb.info.gpio = tmp;
+				ret = devm_gpio_request(dev, tmp, "nand-rb");
+				if (ret)
+					return ret;
+
+				ret = gpio_direction_input(tmp);
+				if (ret)
+					return ret;
+			} else {
+				chip->sels[i].rb.type = RB_NONE;
+			}
+		}
+	}
+
+	timings = onfi_async_timing_mode_to_sdr_timings(0);
+	if (IS_ERR(timings))
+		return PTR_ERR(timings);
+
+	ret = sunxi_nand_chip_set_timings(chip, timings);
+
+	nand = &chip->nand;
+	/* Default tR value specified in the ONFI spec (chapter 4.15.1) */
+	nand->chip_delay = 200;
+	nand->controller = &nfc->controller;
+	nand->select_chip = sunxi_nfc_select_chip;
+	nand->cmd_ctrl = sunxi_nfc_cmd_ctrl;
+	nand->read_buf = sunxi_nfc_read_buf;
+	nand->write_buf = sunxi_nfc_write_buf;
+	nand->read_byte = sunxi_nfc_read_byte;
+
+	if (of_get_nand_on_flash_bbt(np))
+		nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+
+	mtd = &chip->mtd;
+	mtd->dev.parent = dev;
+	mtd->priv = nand;
+	mtd->owner = THIS_MODULE;
+
+	ret = nand_scan_ident(mtd, nsels, NULL);
+	if (ret)
+		return ret;
+
+	ret = sunxi_nand_chip_init_timings(chip, np);
+	if (ret)
+		return ret;
+
+	ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
+	if (ret)
+		return ret;
+
+	ret = nand_scan_tail(mtd);
+	if (ret)
+		return ret;
+
+	if (of_property_read_string(np, "nand-name", &mtd->name)) {
+		snprintf(chip->default_name, MAX_NAME_SIZE,
+			 DEFAULT_NAME_FORMAT, chip->sels[i].cs);
+		mtd->name = chip->default_name;
+	}
+
+	ppdata.of_node = np;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+	if (ret) {
+		nand_release(mtd);
+		return ret;
+	}
+
+	list_add_tail(&chip->node, &nfc->chips);
+
+	return 0;
+}
+
+static int sunxi_nand_chips_init(struct device *dev, struct sunxi_nfc *nfc)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *nand_np;
+	int nchips = of_get_child_count(np);
+	int ret;
+
+	if (nchips > 8)
+		return -EINVAL;
+
+	for_each_child_of_node(np, nand_np) {
+		ret = sunxi_nand_chip_init(dev, nfc, nand_np);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc)
+{
+	struct sunxi_nand_chip *chip;
+
+	while (!list_empty(&nfc->chips)) {
+		chip = list_first_entry(&nfc->chips, struct sunxi_nand_chip,
+					node);
+		nand_release(&chip->mtd);
+		sunxi_nand_ecc_cleanup(&chip->nand.ecc);
+	}
+}
+
+static int sunxi_nfc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *r;
+	struct sunxi_nfc *nfc;
+	int irq;
+	int ret;
+
+	nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	spin_lock_init(&nfc->controller.lock);
+	init_waitqueue_head(&nfc->controller.wq);
+	INIT_LIST_HEAD(&nfc->chips);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nfc->regs = devm_ioremap_resource(dev, r);
+	if (IS_ERR(nfc->regs))
+		return PTR_ERR(nfc->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "failed to retrieve irq\n");
+		return irq;
+	}
+
+	nfc->ahb_clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(nfc->ahb_clk)) {
+		dev_err(dev, "failed to retrieve ahb clk\n");
+		return PTR_ERR(nfc->ahb_clk);
+	}
+
+	ret = clk_prepare_enable(nfc->ahb_clk);
+	if (ret)
+		return ret;
+
+	nfc->mod_clk = devm_clk_get(dev, "mod");
+	if (IS_ERR(nfc->mod_clk)) {
+		dev_err(dev, "failed to retrieve mod clk\n");
+		ret = PTR_ERR(nfc->mod_clk);
+		goto out_ahb_clk_unprepare;
+	}
+
+	ret = clk_prepare_enable(nfc->mod_clk);
+	if (ret)
+		goto out_ahb_clk_unprepare;
+
+	sunxi_nfc_rst(nfc);
+
+	writel(0, nfc->regs + NFC_REG_INT);
+	ret = devm_request_irq(dev, irq, sunxi_nfc_interrupt,
+			       0, "sunxi-nand", nfc);
+	if (ret)
+		goto out_mod_clk_unprepare;
+
+	platform_set_drvdata(pdev, nfc);
+
+	/*
+	 * TODO: replace these magic values with proper flags as soon as we
+	 * know what they are encoding.
+	 */
+	writel(0x100, nfc->regs + NFC_REG_TIMING_CTL);
+	writel(0x7ff, nfc->regs + NFC_REG_TIMING_CFG);
+
+	ret = sunxi_nand_chips_init(dev, nfc);
+	if (ret) {
+		dev_err(dev, "failed to init nand chips\n");
+		goto out_mod_clk_unprepare;
+	}
+
+	return 0;
+
+out_mod_clk_unprepare:
+	clk_disable_unprepare(nfc->mod_clk);
+out_ahb_clk_unprepare:
+	clk_disable_unprepare(nfc->ahb_clk);
+
+	return ret;
+}
+
+static int sunxi_nfc_remove(struct platform_device *pdev)
+{
+	struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
+
+	sunxi_nand_chips_cleanup(nfc);
+
+	return 0;
+}
+
+static const struct of_device_id sunxi_nfc_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-nand" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
+
+static struct platform_driver sunxi_nfc_driver = {
+	.driver = {
+		.name = "sunxi_nand",
+		.owner = THIS_MODULE,
+		.of_match_table = sunxi_nfc_ids,
+	},
+	.probe = sunxi_nfc_probe,
+	.remove = sunxi_nfc_remove,
+};
+module_platform_driver(sunxi_nfc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Boris BREZILLON");
+MODULE_DESCRIPTION("Allwinner NAND Flash Controller driver");
+MODULE_ALIAS("platform:sunxi_nand");
-- 
1.9.1

[PATCH v5 2/2] mtd: nand: add sunxi NFC dt bindings doc

[Boris BREZILLON]

Add the sunxi NAND Flash Controller dt bindings documentation.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
---
 .../devicetree/bindings/mtd/sunxi-nand.txt         | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/sunxi-nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
new file mode 100644
index 0000000..0273adb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -0,0 +1,45 @@
+Allwinner NAND Flash Controller (NFC)
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-nand".
+- reg : shall contain registers location and length for data and reg.
+- interrupts : shall define the nand controller interrupt.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- clocks : shall reference nand controller clocks.
+- clock-names : nand controller internal clock names. Shall contain :
+    * "ahb" : AHB gating clock
+    * "mod" : nand controller clock
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Optional properties:
+- allwinner,rb : shall contain the native Ready/Busy ids.
+ or
+- rb-gpios : shall contain the gpios used as R/B pins.
+- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft",
+  "soft_bch" or "none")
+
+see Documentation/devicetree/mtd/nand.txt for generic bindings.
+
+
+Examples:
+nfc: nand@01c03000 {
+	compatible = "allwinner,sun4i-a10-nand";
+	reg = <0x01c03000 0x1000>;
+	interrupts = <0 37 1>;
+	clocks = <&ahb_gates 13>, <&nand_clk>;
+	clock-names = "ahb", "mod";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "soft_bch";
+	};
+};
-- 
1.9.1