[PATCH 0/5] ARCNET: add support for EAE multi interfac card

[PATCH 0/5] ARCNET: add support for EAE multi interfac card

[Michael Grzeschik]

This series adds support for the PLX bridge based multi interface
pci cards and adds support to change device address on com200xx chips
during runtime.

Thanks,
Michael

Michael Grzeschik (5):
  ARCNET: return IRQ_NONE if the interface isn't running
  ARCNET: add com20020_set_hwddr to change address
  ARCNET: add com20020 PCI IDs with metadata
  ARCNET: add support for multi interfaces on com20020
  ARCNET: enable eae arcnet card support

 drivers/net/arcnet/arcnet.c       |   2 +-
 drivers/net/arcnet/com20020-pci.c | 369 +++++++++++++++++++++++++++++---------
 drivers/net/arcnet/com20020.c     |  14 ++
 include/linux/com20020.h          |  29 +++
 4 files changed, 330 insertions(+), 84 deletions(-)

-- 
2.1.0

[PATCH 1/5] ARCNET: return IRQ_NONE if the interface isn't running

[Michael Grzeschik]

The interrupt handler needs to return IRQ_NONE in case
two devices are used with the shared interrupt handler.
Otherwise it could steal interrupts from the other
interface.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/net/arcnet/arcnet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index a956053..abcbd3c 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -776,7 +776,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
 			ACOMMAND(CFLAGScmd | RESETclear);
 		AINTMASK(0);
 		spin_unlock(&lp->lock);
-		return IRQ_HANDLED;
+		return retval;
 	}
 
 	BUGMSG(D_DURING, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n",
-- 
2.1.0

[PATCH 2/5] ARCNET: add com20020_set_hwddr to change address

[Michael Grzeschik]

This patch adds com20020_set_hwaddr to make
it possible to change the hwaddr on runtime.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/net/arcnet/com20020.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 7b96c5f..1a84378 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -149,11 +149,25 @@ int com20020_check(struct net_device *dev)
 	return 0;
 }
 
+static int com20020_set_hwaddr(struct net_device *dev, void *addr)
+{
+	int ioaddr = dev->base_addr;
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sockaddr *hwaddr = addr;
+
+	memcpy(dev->dev_addr, hwaddr->sa_data, 1);
+	SET_SUBADR(SUB_NODE);
+	outb(dev->dev_addr[0], _XREG);
+
+	return 0;
+}
+
 const struct net_device_ops com20020_netdev_ops = {
 	.ndo_open	= arcnet_open,
 	.ndo_stop	= arcnet_close,
 	.ndo_start_xmit = arcnet_send_packet,
 	.ndo_tx_timeout = arcnet_timeout,
+	.ndo_set_mac_address = com20020_set_hwaddr,
 	.ndo_set_rx_mode = com20020_set_mc_list,
 };
 
-- 
2.1.0

[PATCH 3/5] ARCNET: add com20020 PCI IDs with metadata

[Michael Grzeschik]

This patch adds metadata for the com20020 to prepare for devices with
multiple io address areas with multi card interfaces.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/net/arcnet/com20020-pci.c | 216 ++++++++++++++++++++++++++++++++------
 include/linux/com20020.h          |  16 +++
 2 files changed, 197 insertions(+), 35 deletions(-)

diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index cbc44f5..d08d539 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -63,6 +63,8 @@ MODULE_LICENSE("GPL");
 
 static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct com20020_pci_channel_map *cm;
+	struct com20020_pci_card_info *ci;
 	struct net_device *dev;
 	struct arcnet_local *lp;
 	int ioaddr, err;
@@ -75,19 +77,15 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 	dev->netdev_ops = &com20020_netdev_ops;
 
+	ci = (struct com20020_pci_card_info *)id->driver_data;
+
 	lp = netdev_priv(dev);
 
 	pci_set_drvdata(pdev, dev);
 
-	// SOHARD needs PCI base addr 4
-	if (pdev->vendor==0x10B5) {
-		BUGMSG(D_NORMAL, "SOHARD\n");
-		ioaddr = pci_resource_start(pdev, 4);
-	}
-	else {
-		BUGMSG(D_NORMAL, "Contemporary Controls\n");
-		ioaddr = pci_resource_start(pdev, 2);
-	}
+	cm = &ci->chan_map_tbl[0];
+	BUGMSG(D_NORMAL, "%s Controls\n", ci->name);
+	ioaddr = pci_resource_start(pdev, cm->bar);
 
 	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com20020-pci")) {
 		BUGMSG(D_INIT, "IO region %xh-%xh already allocated.\n",
@@ -105,7 +103,7 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	dev->irq = pdev->irq;
 	dev->dev_addr[0] = node;
 	lp->card_name = "PCI COM20020";
-	lp->card_flags = id->driver_data;
+	lp->card_flags = ci->flags;
 	lp->backplane = backplane;
 	lp->clockp = clockp & 7;
 	lp->clockm = clockm & 3;
@@ -144,32 +142,180 @@ static void com20020pci_remove(struct pci_dev *pdev)
 	free_netdev(dev);
 }
 
+static struct com20020_pci_card_info card_info_10mbit = {
+	.name = "ARC-PCI",
+	.devcount = 1,
+	.chan_map_tbl = {
+		{ 2, 0x00, 0x08 },
+	},
+	.flags = ARC_CAN_10MBIT,
+};
+
+static struct com20020_pci_card_info card_info_5mbit = {
+	.name = "ARC-PCI",
+	.devcount = 1,
+	.chan_map_tbl = {
+		{ 2, 0x00, 0x08 },
+	},
+	.flags = ARC_IS_5MBIT,
+};
+
+static struct com20020_pci_card_info card_info_sohard = {
+	.name = "PLX-PCI",
+	.devcount = 1,
+	/* SOHARD needs PCI base addr 4 */
+	.chan_map_tbl = {
+		{4, 0x00, 0x08},
+	},
+	.flags = ARC_CAN_10MBIT,
+};
+
 static DEFINE_PCI_DEVICE_TABLE(com20020pci_id_table) = {
-	{ 0x1571, 0xa001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0x1571, 0xa009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
-	{ 0x1571, 0xa00a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
-	{ 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
-	{ 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
-	{ 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
-	{ 0x1571, 0xa00e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
-	{ 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x1571, 0xa204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x1571, 0xa205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x10B5, 0x9030, 0x10B5,     0x2978,     0, 0, ARC_CAN_10MBIT },
-	{ 0x10B5, 0x9050, 0x10B5,     0x2273,     0, 0, ARC_CAN_10MBIT },
-	{ 0x14BA, 0x6000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{ 0x10B5, 0x2200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
-	{0,}
+	{
+		0x1571, 0xa001,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0,
+	},
+	{
+		0x1571, 0xa002,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0,
+	},
+	{
+		0x1571, 0xa003,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0
+	},
+	{
+		0x1571, 0xa004,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0,
+	},
+	{
+		0x1571, 0xa005,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0
+	},
+	{
+		0x1571, 0xa006,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0
+	},
+	{
+		0x1571, 0xa007,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0
+	},
+	{
+		0x1571, 0xa008,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		0
+	},
+	{
+		0x1571, 0xa009,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_5mbit
+	},
+	{
+		0x1571, 0xa00a,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_5mbit
+	},
+	{
+		0x1571, 0xa00b,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_5mbit
+	},
+	{
+		0x1571, 0xa00c,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_5mbit
+	},
+	{
+		0x1571, 0xa00d,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_5mbit
+	},
+	{
+		0x1571, 0xa00e,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_5mbit
+	},
+	{
+		0x1571, 0xa201,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x1571, 0xa202,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x1571, 0xa203,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x1571, 0xa204,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x1571, 0xa205,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x1571, 0xa206,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x10B5, 0x9030,
+		0x10B5, 0x2978,
+		0, 0,
+		(kernel_ulong_t)&card_info_sohard
+	},
+	{
+		0x10B5, 0x9050,
+		0x10B5, 0x2273,
+		0, 0,
+		(kernel_ulong_t)&card_info_sohard
+	},
+	{
+		0x14BA, 0x6000,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{
+		0x10B5, 0x2200,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&card_info_10mbit
+	},
+	{ 0, }
 };
 
 MODULE_DEVICE_TABLE(pci, com20020pci_id_table);
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
index 5dcfb94..6a1ceca 100644
--- a/include/linux/com20020.h
+++ b/include/linux/com20020.h
@@ -41,6 +41,22 @@ extern const struct net_device_ops com20020_netdev_ops;
 #define BUS_ALIGN  1
 #endif
 
+#define PLX_PCI_MAX_CARDS 1
+
+struct com20020_pci_channel_map {
+	u32 bar;
+	u32 offset;
+	u32 size;               /* 0x00 - auto, e.g. length of entire bar */
+};
+
+struct com20020_pci_card_info {
+	const char *name;
+	int devcount;
+
+	struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS];
+
+	unsigned int flags;
+};
 
 #define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
 #define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
-- 
2.1.0

[PATCH 4/5] ARCNET: add support for multi interfaces on com20020

[Michael Grzeschik]

The com20020-pci driver is currently designed to instance
one netdev with one pci device. This patch adds support to
instance many cards with one pci device, depending on the device
data in the private data.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/net/arcnet/com20020-pci.c | 149 ++++++++++++++++++++++++--------------
 include/linux/com20020.h          |  15 +++-
 2 files changed, 109 insertions(+), 55 deletions(-)

diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index d08d539..7437174c 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -38,6 +38,7 @@
 #include <linux/pci.h>
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>
+#include <linux/list.h>
 
 #include <asm/io.h>
 
@@ -61,85 +62,125 @@ module_param(clockp, int, 0);
 module_param(clockm, int, 0);
 MODULE_LICENSE("GPL");
 
+static void com20020pci_remove(struct pci_dev *pdev);
+
 static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	struct com20020_pci_channel_map *cm;
 	struct com20020_pci_card_info *ci;
 	struct net_device *dev;
 	struct arcnet_local *lp;
-	int ioaddr, err;
+	struct com20020_priv *priv;
+	int i, ioaddr, ret;
+	struct resource *r;
 
 	if (pci_enable_device(pdev))
 		return -EIO;
-	dev = alloc_arcdev(device);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->netdev_ops = &com20020_netdev_ops;
 
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv),
+			    GFP_KERNEL);
 	ci = (struct com20020_pci_card_info *)id->driver_data;
+	priv->ci = ci;
 
-	lp = netdev_priv(dev);
+	INIT_LIST_HEAD(&priv->list_dev);
 
-	pci_set_drvdata(pdev, dev);
 
-	cm = &ci->chan_map_tbl[0];
-	BUGMSG(D_NORMAL, "%s Controls\n", ci->name);
-	ioaddr = pci_resource_start(pdev, cm->bar);
+	for (i = 0; i < ci->devcount; i++) {
+		struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
+		struct com20020_dev *card;
 
-	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com20020-pci")) {
-		BUGMSG(D_INIT, "IO region %xh-%xh already allocated.\n",
-		       ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
-		err = -EBUSY;
-		goto out_dev;
-	}
+		dev = alloc_arcdev(device);
+		if (!dev) {
+			ret = -ENOMEM;
+			goto out_port;
+		}
 
-	// Dummy access after Reset
-	// ARCNET controller needs this access to detect bustype
-	outb(0x00,ioaddr+1);
-	inb(ioaddr+1);
-
-	dev->base_addr = ioaddr;
-	dev->irq = pdev->irq;
-	dev->dev_addr[0] = node;
-	lp->card_name = "PCI COM20020";
-	lp->card_flags = ci->flags;
-	lp->backplane = backplane;
-	lp->clockp = clockp & 7;
-	lp->clockm = clockm & 3;
-	lp->timeout = timeout;
-	lp->hw.owner = THIS_MODULE;
-
-	if (ASTATUS() == 0xFF) {
-		BUGMSG(D_NORMAL, "IO address %Xh was reported by PCI BIOS, "
-		       "but seems empty!\n", ioaddr);
-		err = -EIO;
-		goto out_port;
-	}
-	if (com20020_check(dev)) {
-		err = -EIO;
-		goto out_port;
+		dev->netdev_ops = &com20020_netdev_ops;
+
+		lp = netdev_priv(dev);
+
+		BUGMSG(D_NORMAL, "%s Controls\n", ci->name);
+		ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
+
+		r = devm_request_region(&pdev->dev, ioaddr, cm->size,
+					"com20020-pci");
+		if (!r) {
+			pr_err("IO region %xh-%xh already allocated.\n",
+			       ioaddr, ioaddr + cm->size - 1);
+			ret = -EBUSY;
+			goto out_port;
+		}
+
+		/* Dummy access after Reset
+		 * ARCNET controller needs
+		 * this access to detect bustype
+		 */
+		outb(0x00, ioaddr + 1);
+		inb(ioaddr + 1);
+
+		dev->base_addr = ioaddr;
+		dev->dev_addr[0] = node;
+		dev->irq = pdev->irq;
+		lp->card_name = "PCI COM20020";
+		lp->card_flags = ci->flags;
+		lp->backplane = backplane;
+		lp->clockp = clockp & 7;
+		lp->clockm = clockm & 3;
+		lp->timeout = timeout;
+		lp->hw.owner = THIS_MODULE;
+
+		if (ASTATUS() == 0xFF) {
+			pr_err("IO address %Xh is empty!\n", ioaddr);
+			ret = -EIO;
+			goto out_port;
+		}
+		if (com20020_check(dev)) {
+			ret = -EIO;
+			goto out_port;
+		}
+
+		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
+				    GFP_KERNEL);
+		if (!card) {
+			pr_err("%s out of memory!\n", __func__);
+			return -ENOMEM;
+		}
+
+		card->index = i;
+		card->pci_priv = priv;
+		card->dev = dev;
+
+		dev_set_drvdata(&dev->dev, card);
+
+		ret = com20020_found(dev, IRQF_SHARED);
+		if (ret)
+			goto out_port;
+
+		list_add(&card->list, &priv->list_dev);
 	}
 
-	if ((err = com20020_found(dev, IRQF_SHARED)) != 0)
-	        goto out_port;
+	pci_set_drvdata(pdev, priv);
 
 	return 0;
 
 out_port:
-	release_region(ioaddr, ARCNET_TOTAL_SIZE);
-out_dev:
-	free_netdev(dev);
-	return err;
+	com20020pci_remove(pdev);
+	return ret;
 }
 
 static void com20020pci_remove(struct pci_dev *pdev)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
-	unregister_netdev(dev);
-	free_irq(dev->irq, dev);
-	release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
-	free_netdev(dev);
+	struct com20020_dev *card, *tmpcard;
+	struct com20020_priv *priv;
+
+	priv = pci_get_drvdata(pdev);
+
+	list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) {
+		struct net_device *dev = card->dev;
+
+		unregister_netdev(dev);
+		free_irq(dev->irq, dev);
+		free_netdev(dev);
+	}
 }
 
 static struct com20020_pci_card_info card_info_10mbit = {
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
index 6a1ceca..8589899 100644
--- a/include/linux/com20020.h
+++ b/include/linux/com20020.h
@@ -41,7 +41,7 @@ extern const struct net_device_ops com20020_netdev_ops;
 #define BUS_ALIGN  1
 #endif
 
-#define PLX_PCI_MAX_CARDS 1
+#define PLX_PCI_MAX_CARDS 2
 
 struct com20020_pci_channel_map {
 	u32 bar;
@@ -58,6 +58,19 @@ struct com20020_pci_card_info {
 	unsigned int flags;
 };
 
+struct com20020_priv {
+	struct com20020_pci_card_info *ci;
+	struct list_head list_dev;
+};
+
+struct com20020_dev {
+	struct list_head list;
+	struct net_device *dev;
+
+	struct com20020_priv *pci_priv;
+	int index;
+};
+
 #define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
 #define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
 #define _COMMAND  (ioaddr+BUS_ALIGN*1)	/* standard arcnet commands */
-- 
2.1.0

[PATCH 5/5] ARCNET: enable eae arcnet card support

[Michael Grzeschik]

This patch adds support for the EAE arcnet cards
which has two Interfaces.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/net/arcnet/com20020-pci.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 7437174c..d17e1c7 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -211,6 +211,16 @@ static struct com20020_pci_card_info card_info_sohard = {
 	.flags = ARC_CAN_10MBIT,
 };
 
+static struct com20020_pci_card_info card_info_eae = {
+	.name = "EAE PLX-PCI",
+	.devcount = 2,
+	.chan_map_tbl = {
+		{ 2, 0x00, 0x08 },
+		{ 2, 0x08, 0x08 }
+	},
+	.flags = ARC_CAN_10MBIT,
+};
+
 static DEFINE_PCI_DEVICE_TABLE(com20020pci_id_table) = {
 	{
 		0x1571, 0xa001,
@@ -345,6 +355,12 @@ static DEFINE_PCI_DEVICE_TABLE(com20020pci_id_table) = {
 		(kernel_ulong_t)&card_info_sohard
 	},
 	{
+		0x10B5, 0x9050,
+		0x10B5, 0x3292,
+		0, 0,
+		(kernel_ulong_t)&card_info_eae
+	},
+	{
 		0x14BA, 0x6000,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0,
-- 
2.1.0

Re: [PATCH 0/5] ARCNET: add support for EAE multi interfac card

[Michael Grzeschik]

Hi,

On Wed, Sep 24, 2014 at 01:01:58PM +0200, Michael Grzeschik wrote:
> This series adds support for the PLX bridge based multi interface
> pci cards and adds support to change device address on com200xx chips
> during runtime.
> 
> Thanks,
> Michael
> 
> Michael Grzeschik (5):
>   ARCNET: return IRQ_NONE if the interface isn't running
>   ARCNET: add com20020_set_hwddr to change address
>   ARCNET: add com20020 PCI IDs with metadata
>   ARCNET: add support for multi interfaces on com20020
>   ARCNET: enable eae arcnet card support
> 
>  drivers/net/arcnet/arcnet.c       |   2 +-
>  drivers/net/arcnet/com20020-pci.c | 369 +++++++++++++++++++++++++++++---------
>  drivers/net/arcnet/com20020.c     |  14 ++
>  include/linux/com20020.h          |  29 +++
>  4 files changed, 330 insertions(+), 84 deletions(-)
> 
> -- 
> 2.1.0

This series was based on v3.16 and does not apply on master. Who could
expect somebody else be patching the arcnet dir in this century. :)

Will send a newer series in some minutes.

Michael Grzeschik


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/5] ARCNET: add com20020_set_hwddr to change address

[Michael Grzeschik]

This patch adds com20020_set_hwaddr to make
it possible to change the hwaddr on runtime.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/net/arcnet/com20020.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 7b96c5f..1a84378 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -149,11 +149,25 @@ int com20020_check(struct net_device *dev)
 	return 0;
 }
 
+static int com20020_set_hwaddr(struct net_device *dev, void *addr)
+{
+	int ioaddr = dev->base_addr;
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sockaddr *hwaddr = addr;
+
+	memcpy(dev->dev_addr, hwaddr->sa_data, 1);
+	SET_SUBADR(SUB_NODE);
+	outb(dev->dev_addr[0], _XREG);
+
+	return 0;
+}
+
 const struct net_device_ops com20020_netdev_ops = {
 	.ndo_open	= arcnet_open,
 	.ndo_stop	= arcnet_close,
 	.ndo_start_xmit = arcnet_send_packet,
 	.ndo_tx_timeout = arcnet_timeout,
+	.ndo_set_mac_address = com20020_set_hwaddr,
 	.ndo_set_rx_mode = com20020_set_mc_list,
 };
 
-- 
2.1.0