linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Baluta <daniel.baluta@intel.com>
To: jic23@kernel.org, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: daniel.baluta@intel.com, irina.tirdea@intel.com
Subject: [RFC PATCH 3/8] iio: core: Introduce new MOTION event
Date: Thu,  2 Oct 2014 16:43:54 +0300	[thread overview]
Message-ID: <1412257439-15683-4-git-send-email-daniel.baluta@intel.com> (raw)
In-Reply-To: <1412257439-15683-1-git-send-email-daniel.baluta@intel.com>

This is to be used by drivers to signal detection of motion. We also
add some possible values for motion as IIO events modifiers:
	* running
	* jogging
	* walking
	* still

These values are supported by Frescale's MMA9553 sensor:

http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
---
 Documentation/ABI/testing/sysfs-bus-iio | 7 +++++++
 drivers/iio/industrialio-core.c         | 4 ++++
 drivers/iio/industrialio-event.c        | 1 +
 include/linux/iio/types.h               | 7 ++++++-
 4 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index d760b02..070346d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -808,6 +808,13 @@ Description:
 		number or direction is not specified, applies to all channels of
 		this type.
 
+What:		/sys/.../events/in_activity_motion_either_en
+KernelVersion:	3.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enables or disables motion detection. Each time motion is detected an
+		event of this type will be generated.
+
 What:		/sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 67e8561..e453ef9 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -92,6 +92,10 @@ static const char * const iio_modifier_names[] = {
 	[IIO_MOD_NORTH_TRUE] = "from_north_true",
 	[IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
 	[IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
+	[IIO_MOD_RUNNING] = "running",
+	[IIO_MOD_JOGGING] = "jogging",
+	[IIO_MOD_WALKING] = "walking",
+	[IIO_MOD_STILL] = "still",
 };
 
 /* relies on pairs of these shared then separate */
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 0c1e37e..eca5af2 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -197,6 +197,7 @@ static const char * const iio_ev_type_text[] = {
 	[IIO_EV_TYPE_ROC] = "roc",
 	[IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive",
 	[IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
+	[IIO_EV_TYPE_MOTION] = "motion",
 };
 
 static const char * const iio_ev_dir_text[] = {
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index d58769a..003638d 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -60,7 +60,11 @@ enum iio_modifier {
 	IIO_MOD_NORTH_MAGN,
 	IIO_MOD_NORTH_TRUE,
 	IIO_MOD_NORTH_MAGN_TILT_COMP,
-	IIO_MOD_NORTH_TRUE_TILT_COMP
+	IIO_MOD_NORTH_TRUE_TILT_COMP,
+	IIO_MOD_RUNNING,
+	IIO_MOD_JOGGING,
+	IIO_MOD_WALKING,
+	IIO_MOD_STILL,
 };
 
 enum iio_event_type {
@@ -69,6 +73,7 @@ enum iio_event_type {
 	IIO_EV_TYPE_ROC,
 	IIO_EV_TYPE_THRESH_ADAPTIVE,
 	IIO_EV_TYPE_MAG_ADAPTIVE,
+	IIO_EV_TYPE_MOTION,
 };
 
 enum iio_event_info {
-- 
1.9.1


  parent reply	other threads:[~2014-10-02 13:40 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-02 13:43 [RFC PATCH] iio: Introduce activity channel Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 1/8] iio: dummy: Introduce virtual registers for dummy device Daniel Baluta
2014-10-04 12:48   ` Jonathan Cameron
2014-10-06 11:17     ` Daniel Baluta
2014-10-09 19:28       ` Jonathan Cameron
2014-10-19 20:30   ` Hartmut Knaack
2014-10-19 20:39     ` Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 2/8] iio: core: Introduce IIO_ACTIVITY channel Daniel Baluta
2014-10-04 13:00   ` Jonathan Cameron
2014-10-02 13:43 ` Daniel Baluta [this message]
2014-10-04 13:12   ` [RFC PATCH 3/8] iio: core: Introduce new MOTION event Jonathan Cameron
2014-10-06 14:17     ` Daniel Baluta
2014-10-09 19:31       ` Jonathan Cameron
2014-10-11  9:47         ` Daniel Baluta
2014-10-13  9:46           ` Karol Wrona
2014-10-07 10:48     ` Daniel Baluta
2014-10-09 19:37       ` Jonathan Cameron
2014-10-02 13:43 ` [RFC PATCH 4/8] iio: core: Introduce pedometer STEP counter modifier Daniel Baluta
2014-10-04 12:53   ` Jonathan Cameron
2014-10-06 13:50     ` Tirdea, Irina
2014-10-06 16:31       ` Jonathan Cameron
2014-10-07 13:54         ` Tirdea, Irina
2014-10-02 13:43 ` [RFC PATCH 5/8] iio: core: Introduce ENABLE channel info mask Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 6/8] iio: core: Introduce new STEP_DETECT event Daniel Baluta
2014-10-04 12:56   ` Jonathan Cameron
2014-10-02 13:43 ` [RFC PATCH 7/8] iio: dummy: Demonstrate the usage of activity channel Daniel Baluta
2014-10-02 13:43 ` [RFC PATCH 8/8] iio: event_monitor: Add support for " Daniel Baluta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412257439-15683-4-git-send-email-daniel.baluta@intel.com \
    --to=daniel.baluta@intel.com \
    --cc=irina.tirdea@intel.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).