linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC
@ 2014-11-17 19:02 George McCollister
  2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister
  2014-11-17 19:10 ` [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC Felipe Balbi
  0 siblings, 2 replies; 5+ messages in thread
From: George McCollister @ 2014-11-17 19:02 UTC (permalink / raw)
  Cc: George McCollister, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Jason Cooper, Mark Brown,
	Heiko Stuebner, Shawn Guo, Florian Vaussard, Andrew Lunn,
	Hayato Suzuki, open list:OPEN FIRMWARE AND...,
	open list

For company details see:
http://www.novatechweb.com

Signed-off-by: George McCollister <george.mccollister@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 723999d..8f1462e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -105,6 +105,7 @@ netgear	NETGEAR
 newhaven	Newhaven Display International
 nintendo	Nintendo
 nokia	Nokia
+novatech	NovaTech LLC
 nvidia	NVIDIA
 nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
-- 
2.1.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  2014-11-17 19:02 [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC George McCollister
@ 2014-11-17 19:02 ` George McCollister
  2014-11-17 19:09   ` Felipe Balbi
  2014-11-17 19:10 ` [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC Felipe Balbi
  1 sibling, 1 reply; 5+ messages in thread
From: George McCollister @ 2014-11-17 19:02 UTC (permalink / raw)
  Cc: George McCollister, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Russell King, Benoît Cousson,
	Tony Lindgren, Nishanth Menon, Florian Vaussard, Tomi Valkeinen,
	Joachim Eastwood, Felipe Balbi, Lokesh Vutla, Rajendra Nayak,
	Carlos Garcia, open list:OPEN FIRMWARE AND...,
	open list, moderated list:ARM PORT, open list:OMAP DEVICE TREE...

This adds the NovaTech OrionLXm which is based on the AM335x SoC
http://www.novatechweb.com/substation-automation/orionlxm/

RAM: 512MiB
Flash: 4GB eMMC
Ethernet PHYs: 2x Micrel KSZ8041FTLI
USB ports are used internally by the expansion cards.
Internal micro SD slot is available.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
---
 .../devicetree/bindings/arm/omap/omap.txt          |   3 +
 arch/arm/boot/dts/Makefile                         |   3 +-
 arch/arm/boot/dts/am335x-lxm.dts                   | 362 +++++++++++++++++++++
 3 files changed, 367 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/am335x-lxm.dts

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ddd9bcd..4f6a82c 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -132,6 +132,9 @@ Boards:
 - AM335X Bone : Low cost community board
   compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
 
+- AM335X OrionLXm : Substation Automation Platform
+  compatible = "novatech,am335x-lxm", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..454ee6c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -331,7 +331,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-nano.dtb \
-	am335x-pepper.dtb
+	am335x-pepper.dtb \
+	am335x-lxm.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
new file mode 100644
index 0000000..7266a00
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "NovaTech OrionLXm";
+	compatible = "novatech,am335x-lxm", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	/* Power supply provides a fixed 5V @2A */
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
+			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
+			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	serial_config1: serial_config1@20 {
+		compatible = "nxp,pca9539";
+		reg = <0x20>;
+	};
+
+	serial_config2: serial_config2@21 {
+		compatible = "nxp,pca9539";
+		reg = <0x21>;
+	};
+
+	tps: tps@2d {
+		compatible = "ti,tps65910";
+		reg = <0x2d>;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		/* vrtc - unused */
+
+		vio_reg: regulator@1 {
+			regulator-name = "vio_1v5,ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd1,mpu";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd2_1v1,core";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* vdd3 - unused */
+
+		/* vdig1 - unused */
+
+		vdig2_reg: regulator@6 {
+			regulator-name = "vdig2_1v8,vdds_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* vpll - unused */
+
+		vdac_reg: regulator@8 {
+			regulator-name = "vdac_1v8,vdds";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-name = "vaux1_1v8,usb";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-name = "vaux2_3v3,io";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-name = "vaux33_3v3,usb";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-name = "vmmc_3v3,io";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <5>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <4>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <3>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+	status = "okay";
+};
+
-- 
2.1.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister
@ 2014-11-17 19:09   ` Felipe Balbi
  2014-11-21 23:33     ` Tony Lindgren
  0 siblings, 1 reply; 5+ messages in thread
From: Felipe Balbi @ 2014-11-17 19:09 UTC (permalink / raw)
  To: George McCollister
  Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	Russell King, Benoît Cousson, Tony Lindgren, Nishanth Menon,
	Florian Vaussard, Tomi Valkeinen, Joachim Eastwood, Felipe Balbi,
	Lokesh Vutla, Carlos Garcia, open list:OPEN FIRMWARE AND...,
	open list, moderated list:ARM PORT, open list:OMAP DEVICE TREE...

[-- Attachment #1: Type: text/plain, Size: 12607 bytes --]

On Mon, Nov 17, 2014 at 01:02:35PM -0600, George McCollister wrote:
> This adds the NovaTech OrionLXm which is based on the AM335x SoC
> http://www.novatechweb.com/substation-automation/orionlxm/
> 
> RAM: 512MiB
> Flash: 4GB eMMC
> Ethernet PHYs: 2x Micrel KSZ8041FTLI
> USB ports are used internally by the expansion cards.
> Internal micro SD slot is available.
> 
> Signed-off-by: George McCollister <george.mccollister@gmail.com>

this looks might better to my eyes:

Reviewed-by: Felipe Balbi <balbi@ti.com>

> ---
>  .../devicetree/bindings/arm/omap/omap.txt          |   3 +
>  arch/arm/boot/dts/Makefile                         |   3 +-
>  arch/arm/boot/dts/am335x-lxm.dts                   | 362 +++++++++++++++++++++
>  3 files changed, 367 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/am335x-lxm.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index ddd9bcd..4f6a82c 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -132,6 +132,9 @@ Boards:
>  - AM335X Bone : Low cost community board
>    compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
>  
> +- AM335X OrionLXm : Substation Automation Platform
> +  compatible = "novatech,am335x-lxm", "ti,am33xx"
> +
>  - OMAP5 EVM : Evaluation Module
>    compatible = "ti,omap5-evm", "ti,omap5"
>  
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 38c89ca..454ee6c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -331,7 +331,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
>  	am335x-evm.dtb \
>  	am335x-evmsk.dtb \
>  	am335x-nano.dtb \
> -	am335x-pepper.dtb
> +	am335x-pepper.dtb \
> +	am335x-lxm.dtb
>  dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
>  	omap4-panda.dtb \
>  	omap4-panda-a4.dtb \
> diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
> new file mode 100644
> index 0000000..7266a00
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-lxm.dts
> @@ -0,0 +1,362 @@
> +/*
> + * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +#include "am33xx.dtsi"
> +
> +/ {
> +	model = "NovaTech OrionLXm";
> +	compatible = "novatech,am335x-lxm", "ti,am33xx";
> +
> +	cpus {
> +		cpu@0 {
> +			cpu0-supply = <&vdd1_reg>;
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +
> +	/* Power supply provides a fixed 5V @2A */
> +	vbat: fixedregulator@0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vbat";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +	};
> +
> +	/* Power supply provides a fixed 3.3V @3A */
> +	vmmcsd_fixed: fixedregulator@1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcsd_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +	};
> +};
> +
> +&am33xx_pinmux {
> +	mmc1_pins: pinmux_mmc1_pins {
> +		pinctrl-single,pins = <
> +			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
> +			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
> +			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
> +			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
> +			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
> +			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
> +		>;
> +	};
> +
> +	i2c0_pins: pinmux_i2c0_pins {
> +		pinctrl-single,pins = <
> +			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
> +			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
> +		>;
> +	};
> +
> +	cpsw_default: cpsw_default {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
> +			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
> +			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
> +			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
> +			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
> +			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
> +			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
> +			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
> +			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
> +
> +			/* Slave 2 */
> +			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
> +			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
> +			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
> +			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
> +			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
> +			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
> +			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
> +			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
> +			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
> +		>;
> +	};
> +
> +	cpsw_sleep: cpsw_sleep {
> +		pinctrl-single,pins = <
> +			/* Slave 1 reset value */
> +			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
> +			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
> +			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
> +			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
> +			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
> +			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
> +			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
> +			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
> +			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
> +
> +			/* Slave 2 reset value*/
> +			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
> +			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
> +			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
> +			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
> +			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
> +			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
> +			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
> +			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
> +			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
> +		>;
> +	};
> +
> +	davinci_mdio_default: davinci_mdio_default {
> +		pinctrl-single,pins = <
> +			/* MDIO */
> +			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
> +			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
> +		>;
> +	};
> +
> +	davinci_mdio_sleep: davinci_mdio_sleep {
> +		pinctrl-single,pins = <
> +			/* MDIO reset value */
> +			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	emmc_pins: pinmux_emmc_pins {
> +		pinctrl-single,pins = <
> +			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
> +			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
> +			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
> +			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
> +			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
> +			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
> +			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
> +			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
> +			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
> +			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
> +		>;
> +	};
> +
> +	uart0_pins: pinmux_uart0_pins {
> +		pinctrl-single,pins = <
> +			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
> +			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
> +		>;
> +	};
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;
> +
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	serial_config1: serial_config1@20 {
> +		compatible = "nxp,pca9539";
> +		reg = <0x20>;
> +	};
> +
> +	serial_config2: serial_config2@21 {
> +		compatible = "nxp,pca9539";
> +		reg = <0x21>;
> +	};
> +
> +	tps: tps@2d {
> +		compatible = "ti,tps65910";
> +		reg = <0x2d>;
> +	};
> +};
> +
> +/include/ "tps65910.dtsi"
> +
> +&tps {
> +	vcc1-supply = <&vbat>;
> +	vcc2-supply = <&vbat>;
> +	vcc3-supply = <&vbat>;
> +	vcc4-supply = <&vbat>;
> +	vcc5-supply = <&vbat>;
> +	vcc6-supply = <&vbat>;
> +	vcc7-supply = <&vbat>;
> +	vccio-supply = <&vbat>;
> +
> +	regulators {
> +		/* vrtc - unused */
> +
> +		vio_reg: regulator@1 {
> +			regulator-name = "vio_1v5,ddr";
> +			regulator-min-microvolt = <1500000>;
> +			regulator-max-microvolt = <1500000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vdd1_reg: regulator@2 {
> +			regulator-name = "vdd1,mpu";
> +			regulator-min-microvolt = <600000>;
> +			regulator-max-microvolt = <1500000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vdd2_reg: regulator@3 {
> +			regulator-name = "vdd2_1v1,core";
> +			regulator-min-microvolt = <1100000>;
> +			regulator-max-microvolt = <1100000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		/* vdd3 - unused */
> +
> +		/* vdig1 - unused */
> +
> +		vdig2_reg: regulator@6 {
> +			regulator-name = "vdig2_1v8,vdds_pll";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		/* vpll - unused */
> +
> +		vdac_reg: regulator@8 {
> +			regulator-name = "vdac_1v8,vdds";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vaux1_reg: regulator@9 {
> +			regulator-name = "vaux1_1v8,usb";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vaux2_reg: regulator@10 {
> +			regulator-name = "vaux2_3v3,io";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vaux33_reg: regulator@11 {
> +			regulator-name = "vaux33_3v3,usb";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vmmc_reg: regulator@12 {
> +			regulator-name = "vmmc_3v3,io";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +	};
> +};
> +
> +&sham {
> +	status = "okay";
> +};
> +
> +&aes {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +
> +	status = "okay";
> +};
> +
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_ctrl_mod {
> +	status = "okay";
> +};
> +
> +&usb0_phy {
> +	status = "okay";
> +};
> +
> +&usb1_phy {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&cppi41dma  {
> +	status = "okay";
> +};
> +
> +&cpsw_emac0 {
> +	phy_id = <&davinci_mdio>, <5>;
> +	phy-mode = "rmii";
> +	dual_emac_res_vlan = <2>;
> +};
> +
> +&cpsw_emac1 {
> +	phy_id = <&davinci_mdio>, <4>;
> +	phy-mode = "rmii";
> +	dual_emac_res_vlan = <3>;
> +};
> +
> +&mac {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&cpsw_default>;
> +	pinctrl-1 = <&cpsw_sleep>;
> +	dual_emac = <1>;
> +	status = "okay";
> +};
> +
> +&davinci_mdio {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&davinci_mdio_default>;
> +	pinctrl-1 = <&davinci_mdio_sleep>;
> +	status = "okay";
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emmc_pins>;
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	bus-width = <8>;
> +	ti,non-removable;
> +	status = "okay";
> +};
> +
> -- 
> 2.1.0
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC
  2014-11-17 19:02 [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC George McCollister
  2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister
@ 2014-11-17 19:10 ` Felipe Balbi
  1 sibling, 0 replies; 5+ messages in thread
From: Felipe Balbi @ 2014-11-17 19:10 UTC (permalink / raw)
  To: George McCollister
  Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	Jason Cooper, Mark Brown, Heiko Stuebner, Shawn Guo,
	Florian Vaussard, Andrew Lunn, Hayato Suzuki,
	open list:OPEN FIRMWARE AND...,
	open list

[-- Attachment #1: Type: text/plain, Size: 1158 bytes --]

On Mon, Nov 17, 2014 at 01:02:34PM -0600, George McCollister wrote:
> For company details see:
> http://www.novatechweb.com
> 
> Signed-off-by: George McCollister <george.mccollister@gmail.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 723999d..8f1462e 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -105,6 +105,7 @@ netgear	NETGEAR
>  newhaven	Newhaven Display International
>  nintendo	Nintendo
>  nokia	Nokia
> +novatech	NovaTech LLC
>  nvidia	NVIDIA
>  nxp	NXP Semiconductors
>  onnn	ON Semiconductor Corp.
> -- 
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
  2014-11-17 19:09   ` Felipe Balbi
@ 2014-11-21 23:33     ` Tony Lindgren
  0 siblings, 0 replies; 5+ messages in thread
From: Tony Lindgren @ 2014-11-21 23:33 UTC (permalink / raw)
  To: Felipe Balbi
  Cc: George McCollister, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Russell King, Benoît Cousson,
	Nishanth Menon, Florian Vaussard, Tomi Valkeinen,
	Joachim Eastwood, Lokesh Vutla, Carlos Garcia,
	open list:OPEN FIRMWARE AND...,
	open list, moderated list:ARM PORT, open list:OMAP DEVICE TREE...

* Felipe Balbi <balbi@ti.com> [141117 11:10]:
> On Mon, Nov 17, 2014 at 01:02:35PM -0600, George McCollister wrote:
> > This adds the NovaTech OrionLXm which is based on the AM335x SoC
> > http://www.novatechweb.com/substation-automation/orionlxm/
> > 
> > RAM: 512MiB
> > Flash: 4GB eMMC
> > Ethernet PHYs: 2x Micrel KSZ8041FTLI
> > USB ports are used internally by the expansion cards.
> > Internal micro SD slot is available.
> > 
> > Signed-off-by: George McCollister <george.mccollister@gmail.com>
> 
> this looks might better to my eyes:
> 
> Reviewed-by: Felipe Balbi <balbi@ti.com>

Applying into omap-for-v3.19/dt-v2 thanks.

Tony

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-11-21 23:33 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-17 19:02 [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC George McCollister
2014-11-17 19:02 ` [PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm George McCollister
2014-11-17 19:09   ` Felipe Balbi
2014-11-21 23:33     ` Tony Lindgren
2014-11-17 19:10 ` [PATCH v2 1/2] of: Add vendor prefix for NovaTech LLC Felipe Balbi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).