* [PATCH 0/2] Introduce ACPI support for ahci_platform driver @ 2014-12-19 20:13 Suravee Suthikulpanit 2014-12-19 20:13 ` [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching Suravee Suthikulpanit 2014-12-19 20:13 ` [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching Suravee Suthikulpanit 0 siblings, 2 replies; 6+ messages in thread From: Suravee Suthikulpanit @ 2014-12-19 20:13 UTC (permalink / raw) To: rjw, lenb, hdegoede, tj, arnd, mjg59 Cc: hanjun.guo, al.stone, graeme.gregory, leo.duran, linux-ide, linux-acpi, linux-kernel, linaro-acpi, Suravee Suthikulpanit This patch series introduce ACPI support for non-PCI AHCI platform driver. Existing ACPI support for AHCI assumes the device controller is a PCI device. Also, since there is no ACPI _HID/_CID for generic AHCI controller, the driver could not use them for matching devices. Therefore, this patch introduces a mechanism for drivers to match devices using ACPI _CLS method. This patch series is rebased from: http://git.linaro.org/leg/acpi/acpi.git acpi-5.1-v6 This topic was discussed earlier here (as part of introducing support for AMD Seattle SATA controller): http://marc.info/?l=linux-arm-kernel&m=141083492521584&w=2 Changes from RFC (https://lkml.org/lkml/2014/12/17/446) * Remove #ifdef and make non-ACPI version of the acpi_match_device_cls as inline. (per Arnd) * Simplify logic to retrieve and evaluate _CLS handle. (per Hanjun) Suravee Suthikulpanit (2): ACPI / scan: Add support for ACPI _CLS device matching ata: ahci_platform: Add ACPI _CLS matching drivers/acpi/scan.c | 63 +++++++++++++++++++++++++++++++++++++++++ drivers/ata/Kconfig | 2 +- drivers/ata/ahci_platform.c | 3 ++ include/acpi/acnames.h | 1 + include/linux/acpi.h | 12 +++++++- include/linux/device.h | 1 + include/linux/mod_devicetable.h | 6 ++++ 7 files changed, 86 insertions(+), 2 deletions(-) -- 1.9.3 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching 2014-12-19 20:13 [PATCH 0/2] Introduce ACPI support for ahci_platform driver Suravee Suthikulpanit @ 2014-12-19 20:13 ` Suravee Suthikulpanit 2014-12-22 11:30 ` Hanjun Guo 2014-12-19 20:13 ` [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching Suravee Suthikulpanit 1 sibling, 1 reply; 6+ messages in thread From: Suravee Suthikulpanit @ 2014-12-19 20:13 UTC (permalink / raw) To: rjw, lenb, hdegoede, tj, arnd, mjg59 Cc: hanjun.guo, al.stone, graeme.gregory, leo.duran, linux-ide, linux-acpi, linux-kernel, linaro-acpi, Suravee Suthikulpanit Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices, and some device classes do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> --- drivers/acpi/scan.c | 63 +++++++++++++++++++++++++++++++++++++++++ include/acpi/acnames.h | 1 + include/linux/acpi.h | 12 +++++++- include/linux/device.h | 1 + include/linux/mod_devicetable.h | 6 ++++ 5 files changed, 82 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index d670158..6bf6f90 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -864,6 +864,69 @@ int acpi_match_device_ids(struct acpi_device *device, } EXPORT_SYMBOL(acpi_match_device_ids); +/** + * acpi_match_device_cls - Match a struct device against a ACPI _CLS method + * @dev_cls: A pointer to struct acpi_device_cls object to match against. + * @dev: The ACPI device structure to match. + * + * Check if @dev has a valid ACPI and _CLS handle. If there is a + * struct acpi_device_cls object for that handle, use that object to match + * against the given struct acpi_device_cls object. + * + * Return 0 on success or error code on failure. + */ +int acpi_match_device_cls(const struct acpi_device_cls *dev_cls, + const struct device *dev) +{ + int ret = -EINVAL; + acpi_status status; + union acpi_object *pkg; + struct acpi_device_cls cls; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer format = { sizeof("NNN"), "NNN" }; + struct acpi_buffer state = { 0, NULL }; + struct acpi_device *adev = ACPI_COMPANION(dev); + acpi_handle handle = ACPI_HANDLE(dev); + + if (!handle || !adev || !adev->status.present || !dev_cls) + return ret; + + status = acpi_evaluate_object(handle, METHOD_NAME__CLS, NULL, &buffer); + if (ACPI_FAILURE(status)) + return ret; + + /** + * Note: + * ACPIv5.1 defines the package to contain 3 integers for + * Base-Class code, Sub-Class code, and Programming Interface code. + */ + pkg = buffer.pointer; + if (!pkg || + (pkg->type != ACPI_TYPE_PACKAGE) || + (pkg->package.count != 3)) { + dev_err(&adev->dev, "Invalid _CLS data\n"); + goto out; + } + + state.length = sizeof(struct acpi_device_cls); + state.pointer = &cls; + + status = acpi_extract_package(pkg, &format, &state); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid data")); + goto out; + } + + if ((dev_cls->base_class == cls.base_class) && + (dev_cls->sub_class == cls.sub_class) && + (dev_cls->prog_interface == cls.prog_interface)) + ret = 0; +out: + kfree(buffer.pointer); + return ret; +} +EXPORT_SYMBOL_GPL(acpi_match_device_cls); + static void acpi_free_power_resources_lists(struct acpi_device *device) { int i; diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h index 7461327..22332a6 100644 --- a/include/acpi/acnames.h +++ b/include/acpi/acnames.h @@ -51,6 +51,7 @@ #define METHOD_NAME__BBN "_BBN" #define METHOD_NAME__CBA "_CBA" #define METHOD_NAME__CID "_CID" +#define METHOD_NAME__CLS "_CLS" #define METHOD_NAME__CRS "_CRS" #define METHOD_NAME__DDN "_DDN" #define METHOD_NAME__HID "_HID" diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 5a92d49..d377623 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -428,10 +428,14 @@ extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, const struct device *dev); +int acpi_match_device_cls(const struct acpi_device_cls *dev_cls, + const struct device *dev); + static inline bool acpi_driver_match_device(struct device *dev, const struct device_driver *drv) { - return !!acpi_match_device(drv->acpi_match_table, dev); + return (!!acpi_match_device(drv->acpi_match_table, dev) || + !acpi_match_device_cls(drv->acpi_cls, dev)); } int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *); @@ -511,6 +515,12 @@ static inline const struct acpi_device_id *acpi_match_device( return NULL; } +static inline int acpi_match_device_cls(const struct acpi_device_cls *dev_cls, + const struct device *dev) +{ + return -EINVAL; +} + static inline bool acpi_driver_match_device(struct device *dev, const struct device_driver *drv) { diff --git a/include/linux/device.h b/include/linux/device.h index ce1f2160..a469adc 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -237,6 +237,7 @@ struct device_driver { const struct of_device_id *of_match_table; const struct acpi_device_id *acpi_match_table; + const struct acpi_device_cls *acpi_cls; int (*probe) (struct device *dev); int (*remove) (struct device *dev); diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 44eeef0..f2ef3c6 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -186,6 +186,12 @@ struct css_device_id { #define ACPI_ID_LEN 9 +struct acpi_device_cls { + kernel_ulong_t base_class; + kernel_ulong_t sub_class; + kernel_ulong_t prog_interface; +}; + struct acpi_device_id { __u8 id[ACPI_ID_LEN]; kernel_ulong_t driver_data; -- 1.9.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching 2014-12-19 20:13 ` [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching Suravee Suthikulpanit @ 2014-12-22 11:30 ` Hanjun Guo 0 siblings, 0 replies; 6+ messages in thread From: Hanjun Guo @ 2014-12-22 11:30 UTC (permalink / raw) To: Suravee Suthikulpanit, rjw, lenb, hdegoede, tj, arnd, mjg59 Cc: al.stone, graeme.gregory, leo.duran, linux-ide, linux-acpi, linux-kernel, linaro-acpi On 2014年12月20日 04:13, Suravee Suthikulpanit wrote: > Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver > acpi_match_table to match devices. However, for generic drivers, we do > not want to list _HID for all supported devices, and some device classes > do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, > which specifies PCI-defined class code (i.e. base-class, subclass and > programming interface). > > This patch adds support for matching ACPI devices using the _CLS method. > > Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> > --- > drivers/acpi/scan.c | 63 +++++++++++++++++++++++++++++++++++++++++ > include/acpi/acnames.h | 1 + > include/linux/acpi.h | 12 +++++++- > include/linux/device.h | 1 + > include/linux/mod_devicetable.h | 6 ++++ > 5 files changed, 82 insertions(+), 1 deletion(-) > > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > index d670158..6bf6f90 100644 > --- a/drivers/acpi/scan.c > +++ b/drivers/acpi/scan.c > @@ -864,6 +864,69 @@ int acpi_match_device_ids(struct acpi_device *device, > } > EXPORT_SYMBOL(acpi_match_device_ids); > > +/** > + * acpi_match_device_cls - Match a struct device against a ACPI _CLS method > + * @dev_cls: A pointer to struct acpi_device_cls object to match against. > + * @dev: The ACPI device structure to match. > + * > + * Check if @dev has a valid ACPI and _CLS handle. If there is a > + * struct acpi_device_cls object for that handle, use that object to match > + * against the given struct acpi_device_cls object. > + * > + * Return 0 on success or error code on failure. > + */ > +int acpi_match_device_cls(const struct acpi_device_cls *dev_cls, > + const struct device *dev) > +{ > + int ret = -EINVAL; > + acpi_status status; > + union acpi_object *pkg; > + struct acpi_device_cls cls; > + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; > + struct acpi_buffer format = { sizeof("NNN"), "NNN" }; > + struct acpi_buffer state = { 0, NULL }; > + struct acpi_device *adev = ACPI_COMPANION(dev); > + acpi_handle handle = ACPI_HANDLE(dev); > + > + if (!handle || !adev || !adev->status.present || !dev_cls) > + return ret; > + > + status = acpi_evaluate_object(handle, METHOD_NAME__CLS, NULL, &buffer); > + if (ACPI_FAILURE(status)) > + return ret; > + > + /** > + * Note: > + * ACPIv5.1 defines the package to contain 3 integers for > + * Base-Class code, Sub-Class code, and Programming Interface code. > + */ > + pkg = buffer.pointer; > + if (!pkg || > + (pkg->type != ACPI_TYPE_PACKAGE) || > + (pkg->package.count != 3)) { > + dev_err(&adev->dev, "Invalid _CLS data\n"); > + goto out; > + } > + > + state.length = sizeof(struct acpi_device_cls); > + state.pointer = &cls; > + > + status = acpi_extract_package(pkg, &format, &state); > + if (ACPI_FAILURE(status)) { > + ACPI_EXCEPTION((AE_INFO, status, "Invalid data")); > + goto out; > + } > + > + if ((dev_cls->base_class == cls.base_class) && > + (dev_cls->sub_class == cls.sub_class) && > + (dev_cls->prog_interface == cls.prog_interface)) > + ret = 0; > +out: > + kfree(buffer.pointer); > + return ret; > +} > +EXPORT_SYMBOL_GPL(acpi_match_device_cls); > + > static void acpi_free_power_resources_lists(struct acpi_device *device) > { > int i; > diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h > index 7461327..22332a6 100644 > --- a/include/acpi/acnames.h > +++ b/include/acpi/acnames.h > @@ -51,6 +51,7 @@ > #define METHOD_NAME__BBN "_BBN" > #define METHOD_NAME__CBA "_CBA" > #define METHOD_NAME__CID "_CID" > +#define METHOD_NAME__CLS "_CLS" > #define METHOD_NAME__CRS "_CRS" > #define METHOD_NAME__DDN "_DDN" > #define METHOD_NAME__HID "_HID" > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index 5a92d49..d377623 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -428,10 +428,14 @@ extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), > const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, > const struct device *dev); > > +int acpi_match_device_cls(const struct acpi_device_cls *dev_cls, > + const struct device *dev); > + > static inline bool acpi_driver_match_device(struct device *dev, > const struct device_driver *drv) > { > - return !!acpi_match_device(drv->acpi_match_table, dev); > + return (!!acpi_match_device(drv->acpi_match_table, dev) || > + !acpi_match_device_cls(drv->acpi_cls, dev)); > } > > int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *); > @@ -511,6 +515,12 @@ static inline const struct acpi_device_id *acpi_match_device( > return NULL; > } > > +static inline int acpi_match_device_cls(const struct acpi_device_cls *dev_cls, > + const struct device *dev) > +{ > + return -EINVAL; > +} > + > static inline bool acpi_driver_match_device(struct device *dev, > const struct device_driver *drv) > { > diff --git a/include/linux/device.h b/include/linux/device.h > index ce1f2160..a469adc 100644 > --- a/include/linux/device.h > +++ b/include/linux/device.h > @@ -237,6 +237,7 @@ struct device_driver { > > const struct of_device_id *of_match_table; > const struct acpi_device_id *acpi_match_table; > + const struct acpi_device_cls *acpi_cls; How about const struct acpi_device_cls *acpi_match_cls; ? Other than that, Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Thanks Hanjun ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching 2014-12-19 20:13 [PATCH 0/2] Introduce ACPI support for ahci_platform driver Suravee Suthikulpanit 2014-12-19 20:13 ` [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching Suravee Suthikulpanit @ 2014-12-19 20:13 ` Suravee Suthikulpanit 2014-12-25 20:32 ` Tejun Heo 2015-01-14 15:52 ` [Linaro-acpi] " Grant Likely 1 sibling, 2 replies; 6+ messages in thread From: Suravee Suthikulpanit @ 2014-12-19 20:13 UTC (permalink / raw) To: rjw, lenb, hdegoede, tj, arnd, mjg59 Cc: hanjun.guo, al.stone, graeme.gregory, leo.duran, linux-ide, linux-acpi, linux-kernel, linaro-acpi, Suravee Suthikulpanit This patch adds ACPI supports for AHCI platform driver, which uses _CLS method to match the device. The following is an example of ASL structure in DSDT for a SATA controller, which contains _CLS package to be matched by the ahci_platform driver: Device (AHC0) // AHCI Controller { Name(_HID, "AMDI0600") Name (_CCA, 1) Name (_CLS, Package (3) { 0x01, // Base Class: Mass Storage 0x06, // Sub-Class: serial ATA 0x01, // Interface: AHCI }) Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } }) } Also, since ATA driver should not require PCI support for ATA_ACPI, this patch removes dependency in the driver/ata/Kconfig. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> --- drivers/ata/Kconfig | 2 +- drivers/ata/ahci_platform.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cd4cccb..edb00c6 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR config ATA_ACPI bool "ATA ACPI Support" - depends on ACPI && PCI + depends on ACPI default y help This option adds support for ATA-related ACPI objects. diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 06f1d59..4879f9b 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -71,6 +71,8 @@ static const struct of_device_id ahci_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_of_match); +static const struct acpi_device_cls ahci_cls = {0x01, 0x06, 0x01}; + static struct platform_driver ahci_driver = { .probe = ahci_probe, .remove = ata_platform_remove_one, @@ -78,6 +80,7 @@ static struct platform_driver ahci_driver = { .name = "ahci", .owner = THIS_MODULE, .of_match_table = ahci_of_match, + .acpi_cls = &ahci_cls, .pm = &ahci_pm_ops, }, }; -- 1.9.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching 2014-12-19 20:13 ` [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching Suravee Suthikulpanit @ 2014-12-25 20:32 ` Tejun Heo 2015-01-14 15:52 ` [Linaro-acpi] " Grant Likely 1 sibling, 0 replies; 6+ messages in thread From: Tejun Heo @ 2014-12-25 20:32 UTC (permalink / raw) To: Suravee Suthikulpanit Cc: rjw, lenb, hdegoede, arnd, mjg59, hanjun.guo, al.stone, graeme.gregory, leo.duran, linux-ide, linux-acpi, linux-kernel, linaro-acpi On Fri, Dec 19, 2014 at 02:13:08PM -0600, Suravee Suthikulpanit wrote: > This patch adds ACPI supports for AHCI platform driver, which uses _CLS > method to match the device. > > The following is an example of ASL structure in DSDT for a SATA controller, > which contains _CLS package to be matched by the ahci_platform driver: > > Device (AHC0) // AHCI Controller > { > Name(_HID, "AMDI0600") > Name (_CCA, 1) > Name (_CLS, Package (3) > { > 0x01, // Base Class: Mass Storage > 0x06, // Sub-Class: serial ATA > 0x01, // Interface: AHCI > }) > Name (_CRS, ResourceTemplate () > { > Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) > Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } > }) > } > > Also, since ATA driver should not require PCI support for ATA_ACPI, > this patch removes dependency in the driver/ata/Kconfig. > > Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Tejun Heo <tj@kernel.org> Please feel free to route this as you see fit. Let me know if this should go through libata. Thanks. -- tejun ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Linaro-acpi] [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching 2014-12-19 20:13 ` [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching Suravee Suthikulpanit 2014-12-25 20:32 ` Tejun Heo @ 2015-01-14 15:52 ` Grant Likely 1 sibling, 0 replies; 6+ messages in thread From: Grant Likely @ 2015-01-14 15:52 UTC (permalink / raw) To: Suravee Suthikulpanit, rjw, lenb, hdegoede, tj, arnd, mjg59 Cc: linux-ide, linaro-acpi, linux-kernel, linux-acpi On Fri, 19 Dec 2014 14:13:08 -0600 , Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> wrote: > This patch adds ACPI supports for AHCI platform driver, which uses _CLS > method to match the device. > > The following is an example of ASL structure in DSDT for a SATA controller, > which contains _CLS package to be matched by the ahci_platform driver: > > Device (AHC0) // AHCI Controller > { > Name(_HID, "AMDI0600") > Name (_CCA, 1) > Name (_CLS, Package (3) > { > 0x01, // Base Class: Mass Storage > 0x06, // Sub-Class: serial ATA > 0x01, // Interface: AHCI > }) > Name (_CRS, ResourceTemplate () > { > Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) > Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } > }) > } > > Also, since ATA driver should not require PCI support for ATA_ACPI, > this patch removes dependency in the driver/ata/Kconfig. > > Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Looks good to me. Reviewed-by: Grant Likely <grant.likely@linaro.org> > --- > drivers/ata/Kconfig | 2 +- > drivers/ata/ahci_platform.c | 3 +++ > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index cd4cccb..edb00c6 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR > > config ATA_ACPI > bool "ATA ACPI Support" > - depends on ACPI && PCI > + depends on ACPI > default y > help > This option adds support for ATA-related ACPI objects. > diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c > index 06f1d59..4879f9b 100644 > --- a/drivers/ata/ahci_platform.c > +++ b/drivers/ata/ahci_platform.c > @@ -71,6 +71,8 @@ static const struct of_device_id ahci_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, ahci_of_match); > > +static const struct acpi_device_cls ahci_cls = {0x01, 0x06, 0x01}; > + > static struct platform_driver ahci_driver = { > .probe = ahci_probe, > .remove = ata_platform_remove_one, > @@ -78,6 +80,7 @@ static struct platform_driver ahci_driver = { > .name = "ahci", > .owner = THIS_MODULE, > .of_match_table = ahci_of_match, > + .acpi_cls = &ahci_cls, > .pm = &ahci_pm_ops, > }, > }; > -- > 1.9.3 > > > _______________________________________________ > Linaro-acpi mailing list > Linaro-acpi@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-acpi ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-01-14 15:52 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-12-19 20:13 [PATCH 0/2] Introduce ACPI support for ahci_platform driver Suravee Suthikulpanit 2014-12-19 20:13 ` [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching Suravee Suthikulpanit 2014-12-22 11:30 ` Hanjun Guo 2014-12-19 20:13 ` [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching Suravee Suthikulpanit 2014-12-25 20:32 ` Tejun Heo 2015-01-14 15:52 ` [Linaro-acpi] " Grant Likely
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).