linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiang Liu <jiang.liu@linux.intel.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Joerg Roedel <joro@8bytes.org>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	Yinghai Lu <yinghai@kernel.org>, Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
	Tony Luck <tony.luck@intel.com>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org
Subject: [Patch v2 10/16] iommu/vt-d: Allow IR works in XAPIC mode though CPU works in X2APIC mode
Date: Wed,  7 Jan 2015 15:31:37 +0800	[thread overview]
Message-ID: <1420615903-28253-11-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1420615903-28253-1-git-send-email-jiang.liu@linux.intel.com>

Currently if CPU supports X2APIC, IR hardware must work in X2APIC mode
or disabled. Change the code to support IR working in XAPIC mode when
CPU supports X2APIC. Then the CPU APIC driver will decide how to handle
such as configuration by:
1) Disabling X2APIC mode
2) Forcing X2APIC physical mode

This change also fixes a live locking when
1) BIOS enables CPU X2APIC
2) DMAR table disables X2APIC mode or IR hardware doesn't support X2APIC
with following messages:
[   37.863463] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[   37.863463] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[   37.879372] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[   37.879372] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[   37.895282] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[   37.895282] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[   37.911192] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
 drivers/iommu/intel_irq_remapping.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 137663bd5da2..9d67c12c2ffb 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -32,8 +32,9 @@ struct hpet_scope {
 };
 
 #define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
-#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
+#define IRTE_DEST(dest) ((eim_mode) ? dest : dest << 8)
 
+static int __read_mostly eim_mode;
 static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
 static struct hpet_scope ir_hpet[MAX_HPET_TBS];
 
@@ -644,8 +645,6 @@ static int __init intel_enable_irq_remapping(void)
 	int eim = 0;
 
 	if (x2apic_supported()) {
-		pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
-
 		eim = !dmar_x2apic_optout();
 		if (!eim)
 			printk(KERN_WARNING
@@ -683,8 +682,11 @@ static int __init intel_enable_irq_remapping(void)
 		if (eim && !ecap_eim_support(iommu->ecap)) {
 			printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, "
 			       " ecap %Lx\n", drhd->reg_base_addr, iommu->ecap);
-			goto error;
+			eim = 0;
 		}
+	eim_mode = eim;
+	if (eim)
+		pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
 
 	/*
 	 * Enable queued invalidation for all the DRHD's.
-- 
1.7.10.4


  parent reply	other threads:[~2015-01-07  7:29 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-07  7:31 [Patch v2 00/16] Refine IR initialization flow and fixes bugs related to X2APIC Jiang Liu
2015-01-07  7:31 ` [Patch v2 01/16] iommu, x86: Restructure setup of the irq remapping feature Jiang Liu
2015-01-15 12:58   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-01-07  7:31 ` [Patch v2 02/16] iommu/vt-d: Move iommu preparatory allocations to irq_remap_ops.prepare Jiang Liu
2015-01-15 12:58   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-01-07  7:31 ` [Patch v2 03/16] iommu/vt-d: Convert allocations to GFP_KERNEL Jiang Liu
2015-01-15 12:59   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-01-07  7:31 ` [Patch v2 04/16] x86/apic: Panic if kernel doesn't support x2apic but BIOS has enabled x2apic Jiang Liu
2015-01-15 12:59   ` [tip:x86/apic] x86/apic: Panic if kernel doesn' t " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 05/16] x86/apic: Kill useless variable x2apic_enabled in function enable_IR_x2apic() Jiang Liu
2015-01-15 12:59   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 06/16] x86/apic: Correctly detect X2APIC status in function enable_IR() Jiang Liu
2015-01-15 13:00   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 07/16] x86/apic: Refine enable_IR_x2apic() and related functions Jiang Liu
2015-01-15  9:24   ` Thomas Gleixner
2015-01-15 13:00   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-15 13:00   ` [tip:x86/apic] x86/apic: Handle XAPIC remap mode proper tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 08/16] iommu/vt-d: Prepare for killing function irq_remapping_supported() Jiang Liu
2015-01-15 13:01   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 09/16] iommu/vt-d: Allocate IRQ remapping data structures only for all IOMMUs Jiang Liu
2015-01-15 13:01   ` [tip:x86/apic] " tip-bot for Joerg Roedel
2015-01-07  7:31 ` Jiang Liu [this message]
2015-01-15 13:01   ` [tip:x86/apic] iommu/vt-d: Allow IR works in XAPIC mode though CPU works in X2APIC mode tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 11/16] x86/apic: Only disable CPU x2apic mode when necessary Jiang Liu
2015-01-15 13:02   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 12/16] iommu/amd: Check for irq-remap support amd_iommu_prepare() Jiang Liu
2015-01-15 13:02   ` [tip:x86/apic] " tip-bot for Joerg Roedel
2015-01-07  7:31 ` [Patch v2 13/16] iommu/irq_remapping: Kill function irq_remapping_supported() and related code Jiang Liu
2015-01-15 13:02   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 14/16] iommu/irq_remapping: Refine function irq_remapping_prepare() for maintenance Jiang Liu
2015-01-15 13:03   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 15/16] iommu/irq_remapping: Change variable disable_irq_remap to be static Jiang Liu
2015-01-15 13:03   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-07  7:31 ` [Patch v2 16/16] iommu/irq_remapping: Normailize the way to detect whether IR is enabled Jiang Liu
2015-01-15 13:03   ` [tip:x86/apic] " tip-bot for Jiang Liu
2015-01-09 12:03 ` [Patch v2 00/16] Refine IR initialization flow and fixes bugs related to X2APIC Joerg Roedel
  -- strict thread matches above, loose matches on Subject: below --
2014-12-05  8:48 [patch 0/5] x86/iommu: Bootup stage cleanups Thomas Gleixner
2014-12-05  8:48 ` [patch 1/5] x86, smpboot: Remove pointless preempt_disable() in native_smp_prepare_cpus() Thomas Gleixner
2014-12-05 23:25   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-19 14:02   ` tip-bot for Thomas Gleixner
2014-12-05  8:48 ` [patch 2/5] iommu, x86: Restructure setup of the irq remapping feature Thomas Gleixner
2014-12-05 23:25   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-05  8:48 ` [patch 3/5] iommu/vt-d: Move iommu preparatory allocations to irq_remap_ops.prepare Thomas Gleixner
2014-12-05 23:26   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-11  7:35     ` Yinghai Lu
2014-12-11 14:33       ` Jiang Liu
2014-12-11 17:57         ` Yinghai Lu
2014-12-11 20:30           ` Thomas Gleixner
2014-12-12  2:04             ` Yinghai Lu
2015-04-27 22:46               ` Yinghai Lu
2015-04-29  8:15                 ` Jiang Liu
2014-12-05  8:48 ` [patch 4/5] irqdomain: Revert gfp hackery Thomas Gleixner
2014-12-05 23:26   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-05  8:48 ` [patch 5/5] iommu/vt-d: Convert allocations to GFP_KERNEL Thomas Gleixner
2014-12-05 23:26   ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2014-12-05 12:22 ` [patch 0/5] x86/iommu: Bootup stage cleanups Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420615903-28253-11-git-send-email-jiang.liu@linux.intel.com \
    --to=jiang.liu@linux.intel.com \
    --cc=benh@kernel.crashing.org \
    --cc=bp@alien8.de \
    --cc=hpa@zytor.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).