* [PATCH RESEND 1/4] staging: rtl8192u: fix comments
@ 2015-01-10 14:19 Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 2/4] staging: rtl8192u: fix whitespace and alignment Lorenzo Stoakes
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Lorenzo Stoakes @ 2015-01-10 14:19 UTC (permalink / raw)
To: gregkh
Cc: anarey, mcgrof, tapaswenipathak, joe, rmfrfs, yejiayily, gdonald,
devel, linux-kernel, Lorenzo Stoakes
This patch fixes errors raised by checkpatch.pl relating to use of C99 comments
in r8192U_dm.c, and cleans up existing ANSI C comments.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
---
drivers/staging/rtl8192u/r8192U_dm.c | 811 ++++++++++++++++++-----------------
1 file changed, 420 insertions(+), 391 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 936565d..cafc717 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -21,9 +21,7 @@ Major Change History:
#include "r8190_rtl8256.h"
#include "r819xU_cmdpkt.h"
/*---------------------------Define Local Constant---------------------------*/
-//
-// Indicate different AP vendor for IOT issue.
-//
+/* Indicate different AP vendor for IOT issue. */
static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
{ 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f};
static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
@@ -36,11 +34,11 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
/*------------------------Define global variable-----------------------------*/
-// Debug variable ?
+/* Debug variable ? */
dig_t dm_digtable;
-// Store current software write register content for MAC PHY.
+/* Store current software write register content for MAC PHY. */
u8 dm_shadow[16][256] = {{0}};
-// For Dynamic Rx Path Selection by Signal Strength
+/* For Dynamic Rx Path Selection by Signal Strength */
DRxPathSel DM_RxPathSelTable;
/*------------------------Define global variable-----------------------------*/
@@ -56,24 +54,24 @@ extern void dm_check_fsync(struct net_device *dev);
/*---------------------Define local function prototype-----------------------*/
-// DM --> Rate Adaptive
+/* DM --> Rate Adaptive */
static void dm_check_rate_adaptive(struct net_device *dev);
-// DM --> Bandwidth switch
+/* DM --> Bandwidth switch */
static void dm_init_bandwidth_autoswitch(struct net_device *dev);
static void dm_bandwidth_autoswitch(struct net_device *dev);
-// DM --> TX power control
-//static void dm_initialize_txpower_tracking(struct net_device *dev);
+/* DM --> TX power control */
+/*static void dm_initialize_txpower_tracking(struct net_device *dev);*/
static void dm_check_txpower_tracking(struct net_device *dev);
-//static void dm_txpower_reset_recovery(struct net_device *dev);
+/*static void dm_txpower_reset_recovery(struct net_device *dev);*/
-// DM --> Dynamic Init Gain by RSSI
+/* DM --> Dynamic Init Gain by RSSI */
static void dm_dig_init(struct net_device *dev);
static void dm_ctrl_initgain_byrssi(struct net_device *dev);
static void dm_ctrl_initgain_byrssi_highpwr(struct net_device *dev);
@@ -84,61 +82,61 @@ static void dm_pd_th(struct net_device *dev);
static void dm_cs_ratio(struct net_device *dev);
static void dm_init_ctstoself(struct net_device *dev);
-// DM --> EDCA turbo mode control
+/* DM --> EDCA turbo mode control */
static void dm_check_edca_turbo(struct net_device *dev);
-//static void dm_gpio_change_rf(struct net_device *dev);
-// DM --> Check PBC
+/*static void dm_gpio_change_rf(struct net_device *dev);*/
+/* DM --> Check PBC */
static void dm_check_pbc_gpio(struct net_device *dev);
-// DM --> Check current RX RF path state
+/* DM --> Check current RX RF path state */
static void dm_check_rx_path_selection(struct net_device *dev);
static void dm_init_rxpath_selection(struct net_device *dev);
static void dm_rxpath_sel_byrssi(struct net_device *dev);
-// DM --> Fsync for broadcom ap
+/* DM --> Fsync for broadcom ap */
static void dm_init_fsync(struct net_device *dev);
static void dm_deInit_fsync(struct net_device *dev);
-//Added by vivi, 20080522
+/* Added by vivi, 20080522 */
static void dm_check_txrateandretrycount(struct net_device *dev);
/*---------------------Define local function prototype-----------------------*/
-/*---------------------Define of Tx Power Control For Near/Far Range --------*/ //Add by Jacken 2008/02/18
+/*---------------------Define of Tx Power Control For Near/Far Range --------*/ /*Add by Jacken 2008/02/18 */
static void dm_init_dynamic_txpower(struct net_device *dev);
static void dm_dynamic_txpower(struct net_device *dev);
-// DM --> For rate adaptive and DIG, we must send RSSI to firmware
+/* DM --> For rate adaptive and DIG, we must send RSSI to firmware */
static void dm_send_rssi_tofw(struct net_device *dev);
static void dm_ctstoself(struct net_device *dev);
/*---------------------------Define function prototype------------------------*/
-//================================================================================
-// HW Dynamic mechanism interface.
-//================================================================================
-
-//
-// Description:
-// Prepare SW resource for HW dynamic mechanism.
-//
-// Assumption:
-// This function is only invoked at driver intialization once.
-//
-//
+/*
+ * ================================================================================
+ * HW Dynamic mechanism interface.
+ * ================================================================================
+ *
+ *
+ * Description:
+ * Prepare SW resource for HW dynamic mechanism.
+ *
+ * Assumption:
+ * This function is only invoked at driver intialization once.
+ */
void init_hal_dm(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- // Undecorated Smoothed Signal Strength, it can utilized to dynamic mechanism.
+ /* Undecorated Smoothed Signal Strength, it can utilized to dynamic mechanism. */
priv->undecorated_smoothed_pwdb = -1;
- //Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code.
+ /* Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. */
dm_init_dynamic_txpower(dev);
init_rate_adaptive(dev);
- //dm_initialize_txpower_tracking(dev);
+ /*dm_initialize_txpower_tracking(dev);*/
dm_dig_init(dev);
dm_init_edca_turbo(dev);
dm_init_bandwidth_autoswitch(dev);
@@ -146,7 +144,7 @@ void init_hal_dm(struct net_device *dev)
dm_init_rxpath_selection(dev);
dm_init_ctstoself(dev);
-} // InitHalDm
+} /* InitHalDm */
void deinit_hal_dm(struct net_device *dev)
{
@@ -208,16 +206,16 @@ void dm_CheckRxAggregation(struct net_device *dev) {
lastTxOkCnt = priv->stats.txbytesunicast;
lastRxOkCnt = priv->stats.rxbytesunicast;
-} // dm_CheckEdcaTurbo
+} /* dm_CheckEdcaTurbo */
#endif
void hal_dm_watchdog(struct net_device *dev)
{
- //struct r8192_priv *priv = ieee80211_priv(dev);
+ /*struct r8192_priv *priv = ieee80211_priv(dev);*/
- //static u8 previous_bssid[6] ={0};
+ /*static u8 previous_bssid[6] ={0};*/
/*Add by amy 2008/05/15 ,porting from windows code.*/
dm_check_rate_adaptive(dev);
@@ -230,22 +228,22 @@ void hal_dm_watchdog(struct net_device *dev)
dm_check_rx_path_selection(dev);
dm_check_fsync(dev);
- // Add by amy 2008-05-15 porting from windows code.
+ /* Add by amy 2008-05-15 porting from windows code. */
dm_check_pbc_gpio(dev);
dm_send_rssi_tofw(dev);
dm_ctstoself(dev);
#ifdef USB_RX_AGGREGATION_SUPPORT
dm_CheckRxAggregation(dev);
#endif
-} //HalDmWatchDog
+} /* HalDmWatchDog */
/*
- * Decide Rate Adaptive Set according to distance (signal strength)
- * 01/11/2008 MHC Modify input arguments and RATR table level.
- * 01/16/2008 MHC RF_Type is assigned in ReadAdapterInfo(). We must call
- * the function after making sure RF_Type.
- */
+ * Decide Rate Adaptive Set according to distance (signal strength)
+ * 01/11/2008 MHC Modify input arguments and RATR table level.
+ * 01/16/2008 MHC RF_Type is assigned in ReadAdapterInfo(). We must call
+ * the function after making sure RF_Type.
+ */
void init_rate_adaptive(struct net_device *dev)
{
@@ -270,14 +268,16 @@ void init_rate_adaptive(struct net_device *dev)
if (priv->rf_type == RF_2T4R)
{
- // 07/10/08 MH Modify for RA smooth scheme.
- /* 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.*/
+ /*
+ * 07/10/08 MH Modify for RA smooth scheme.
+ * 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.
+ */
pra->upper_rssi_threshold_ratr = 0x8f0f0000;
pra->middle_rssi_threshold_ratr = 0x8f0ff000;
pra->low_rssi_threshold_ratr = 0x8f0ff001;
pra->low_rssi_threshold_ratr_40M = 0x8f0ff005;
pra->low_rssi_threshold_ratr_20M = 0x8f0ff001;
- pra->ping_rssi_ratr = 0x0000000d;//cosa add for test
+ pra->ping_rssi_ratr = 0x0000000d;/* cosa add for test */
}
else if (priv->rf_type == RF_1T2R)
{
@@ -286,10 +286,10 @@ void init_rate_adaptive(struct net_device *dev)
pra->low_rssi_threshold_ratr = 0x000ff001;
pra->low_rssi_threshold_ratr_40M = 0x000ff005;
pra->low_rssi_threshold_ratr_20M = 0x000ff001;
- pra->ping_rssi_ratr = 0x0000000d;//cosa add for test
+ pra->ping_rssi_ratr = 0x0000000d;/* cosa add for test */
}
-} // InitRateAdaptive
+} /* InitRateAdaptive */
/*-----------------------------------------------------------------------------
@@ -325,21 +325,21 @@ static void dm_check_rate_adaptive(struct net_device *dev)
return;
}
- if(pra->rate_adaptive_disabled)//this variable is set by ioctl.
+ if(pra->rate_adaptive_disabled) /* this variable is set by ioctl. */
return;
- // TODO: Only 11n mode is implemented currently,
+ /* TODO: Only 11n mode is implemented currently, */
if(!(priv->ieee80211->mode == WIRELESS_MODE_N_24G ||
priv->ieee80211->mode == WIRELESS_MODE_N_5G))
return;
if(priv->ieee80211->state == IEEE80211_LINKED)
{
- // RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");
+ /*RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");*/
- //
- // Check whether Short GI is enabled
- //
+ /*
+ * Check whether Short GI is enabled
+ */
bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI40MHz) ||
(!pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI20MHz);
@@ -360,7 +360,7 @@ static void dm_check_rate_adaptive(struct net_device *dev)
pra->low_rssi_threshold_ratr =
(pra->low_rssi_threshold_ratr_20M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
}
- //cosa add for test
+ /* cosa add for test */
pra->ping_rssi_ratr =
(pra->ping_rssi_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
@@ -387,56 +387,58 @@ static void dm_check_rate_adaptive(struct net_device *dev)
(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
}
- //DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);
+ /*DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);*/
if(priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA)
{
- //DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);
+ /*DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_HIGH;
targetRATR = pra->upper_rssi_threshold_ratr;
}else if(priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA)
{
- //DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);
+ /*DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_MIDDLE;
targetRATR = pra->middle_rssi_threshold_ratr;
}else
{
- //DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);
+ /*DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->low_rssi_threshold_ratr;
}
- //cosa add for test
+ /* cosa add for test */
if(pra->ping_rssi_enable)
{
- //pHalData->UndecoratedSmoothedPWDB = 19;
+ /*pHalData->UndecoratedSmoothedPWDB = 19;*/
if(priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5))
{
if((priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
ping_rssi_state)
{
- //DbgPrint("TestRSSI = %d, set RATR to 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);
+ /*DbgPrint("TestRSSI = %d, set RATR to 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);*/
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->ping_rssi_ratr;
ping_rssi_state = 1;
}
- //else
- // DbgPrint("TestRSSI is between the range. \n");
+ /*else
+ DbgPrint("TestRSSI is between the range. \n");*/
}
else
{
- //DbgPrint("TestRSSI Recover to 0x%x \n", targetRATR);
+ /*DbgPrint("TestRSSI Recover to 0x%x \n", targetRATR);*/
ping_rssi_state = 0;
}
}
- // 2008.04.01
- // For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
+ /*
+ * 2008.04.01
+ * For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
+ */
if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))
targetRATR &= 0xf00fffff;
- //
- // Check whether updating of RATR0 is required
- //
+ /*
+ * Check whether updating of RATR0 is required
+ */
read_nic_dword(dev, RATR0, ¤tRATR);
if(targetRATR != currentRATR)
{
@@ -459,7 +461,7 @@ static void dm_check_rate_adaptive(struct net_device *dev)
pra->ratr_state = DM_RATR_STA_MAX;
}
-} // dm_CheckRateAdaptive
+} /* dm_CheckRateAdaptive */
static void dm_init_bandwidth_autoswitch(struct net_device *dev)
@@ -471,7 +473,7 @@ static void dm_init_bandwidth_autoswitch(struct net_device *dev)
priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable = false;
-} // dm_init_bandwidth_autoswitch
+} /* dm_init_bandwidth_autoswitch */
static void dm_bandwidth_autoswitch(struct net_device *dev)
@@ -481,68 +483,68 @@ static void dm_bandwidth_autoswitch(struct net_device *dev)
if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 ||!priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable){
return;
}else{
- if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false){//If send packets in 40 Mhz in 20/40
+ if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false){ /* If send packets in 40 Mhz in 20/40 */
if(priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
- }else{//in force send packets in 20 Mhz in 20/40
+ }else{ /* in force send packets in 20 Mhz in 20/40 */
if(priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
}
}
-} // dm_BandwidthAutoSwitch
+} /* dm_BandwidthAutoSwitch */
-//OFDM default at 0db, index=6.
+/* OFDM default at 0db, index=6. */
static u32 OFDMSwingTable[OFDM_Table_Length] = {
- 0x7f8001fe, // 0, +6db
- 0x71c001c7, // 1, +5db
- 0x65400195, // 2, +4db
- 0x5a400169, // 3, +3db
- 0x50800142, // 4, +2db
- 0x47c0011f, // 5, +1db
- 0x40000100, // 6, +0db ===> default, upper for higher temperature, lower for low temperature
- 0x390000e4, // 7, -1db
- 0x32c000cb, // 8, -2db
- 0x2d4000b5, // 9, -3db
- 0x288000a2, // 10, -4db
- 0x24000090, // 11, -5db
- 0x20000080, // 12, -6db
- 0x1c800072, // 13, -7db
- 0x19800066, // 14, -8db
- 0x26c0005b, // 15, -9db
- 0x24400051, // 16, -10db
- 0x12000048, // 17, -11db
- 0x10000040 // 18, -12db
+ 0x7f8001fe, /* 0, +6db */
+ 0x71c001c7, /* 1, +5db */
+ 0x65400195, /* 2, +4db */
+ 0x5a400169, /* 3, +3db */
+ 0x50800142, /* 4, +2db */
+ 0x47c0011f, /* 5, +1db */
+ 0x40000100, /* 6, +0db ===> default, upper for higher temperature, lower for low temperature */
+ 0x390000e4, /* 7, -1db */
+ 0x32c000cb, /* 8, -2db */
+ 0x2d4000b5, /* 9, -3db */
+ 0x288000a2, /* 10, -4db */
+ 0x24000090, /* 11, -5db */
+ 0x20000080, /* 12, -6db */
+ 0x1c800072, /* 13, -7db */
+ 0x19800066, /* 14, -8db */
+ 0x26c0005b, /* 15, -9db */
+ 0x24400051, /* 16, -10db */
+ 0x12000048, /* 17, -11db */
+ 0x10000040 /* 18, -12db */
};
static u8 CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = {
- {0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}, // 0, +0db ===> CCK40M default
- {0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, // 1, -1db
- {0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, // 2, -2db
- {0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, // 3, -3db
- {0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, // 4, -4db
- {0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, // 5, -5db
- {0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, // 6, -6db ===> CCK20M default
- {0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, // 7, -7db
- {0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, // 8, -8db
- {0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, // 9, -9db
- {0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, // 10, -10db
- {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01} // 11, -11db
+ {0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}, /* 0, +0db ===> CCK40M default */
+ {0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, /* 1, -1db */
+ {0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, /* 2, -2db */
+ {0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, /* 3, -3db */
+ {0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, /* 4, -4db */
+ {0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, /* 5, -5db */
+ {0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, /* 6, -6db ===> CCK20M default */
+ {0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, /* 7, -7db */
+ {0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, /* 8, -8db */
+ {0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, /* 9, -9db */
+ {0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, /* 10, -10db */
+ {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01} /* 11, -11db */
};
static u8 CCKSwingTable_Ch14[CCK_Table_length][8] = {
- {0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}, // 0, +0db ===> CCK40M default
- {0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, // 1, -1db
- {0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, // 2, -2db
- {0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, // 3, -3db
- {0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, // 4, -4db
- {0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, // 5, -5db
- {0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, // 6, -6db ===> CCK20M default
- {0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, // 7, -7db
- {0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, // 8, -8db
- {0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, // 9, -9db
- {0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, // 10, -10db
- {0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00} // 11, -11db
+ {0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}, /* 0, +0db ===> CCK40M default */
+ {0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, /* 1, -1db */
+ {0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, /* 2, -2db */
+ {0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, /* 3, -3db */
+ {0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, /* 4, -4db */
+ {0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, /* 5, -5db */
+ {0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, /* 6, -6db ===> CCK20M default */
+ {0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, /* 7, -7db */
+ {0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, /* 8, -8db */
+ {0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, /* 9, -9db */
+ {0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, /* 10, -10db */
+ {0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00} /* 11, -11db */
};
static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
@@ -556,7 +558,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
u32 Value;
u8 Pwr_Flag;
u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0;
- //RT_STATUS rtStatus = RT_STATUS_SUCCESS;
+ /*RT_STATUS rtStatus = RT_STATUS_SUCCESS;*/
bool rtStatus = true;
u32 delta=0;
@@ -572,8 +574,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
RT_TRACE(COMP_POWER_TRACKING, "powerlevelOFDM24G = %x\n", powerlevelOFDM24G);
for(j = 0; j<=30; j++)
-{ //fill tx_cmd
-
+{ /* fill tx_cmd */
tx_cmd.Op = TXCMD_SET_TX_PWR_TRACKING;
tx_cmd.Length = 4;
tx_cmd.Value = Value;
@@ -583,7 +584,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
}
mdelay(1);
- //DbgPrint("hi, vivi, strange\n");
+ /*DbgPrint("hi, vivi, strange\n");*/
for(i = 0;i <= 30; i++)
{
read_nic_byte(dev, 0x1ba, &Pwr_Flag);
@@ -609,7 +610,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]);
}
- //check if the report value is right
+ /* check if the report value is right */
for(k = 0;k < 5; k++)
{
if(tmp_report[k] <= 20)
@@ -638,8 +639,8 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
TSSI_13dBm = priv->TSSI_13dBm;
RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm);
- //if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)
- // For MacOS-compatible
+ /*if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)*/
+ /* For MacOS-compatible */
if(Avg_TSSI_Meas_from_driver > TSSI_13dBm)
delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
else
@@ -741,9 +742,9 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
if(!priv->btxpower_trackingInit)
{
- //Query OFDM default setting
+ /* Query OFDM default setting */
tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
- for(i=0; i<OFDM_Table_Length; i++) //find the index
+ for(i=0; i<OFDM_Table_Length; i++) /* find the index */
{
if(tmpRegA == OFDMSwingTable[i])
{
@@ -753,7 +754,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
}
}
- //Query CCK default setting From 0xa22
+ /* Query CCK default setting From 0xa22 */
TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
for(i=0 ; i<CCK_Table_length ; i++)
{
@@ -766,27 +767,29 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
}
}
priv->btxpower_trackingInit = TRUE;
- //pHalData->TXPowercount = 0;
+ /*pHalData->TXPowercount = 0;*/
return;
}
- //==========================
- // this is only for test, should be masked
- //==========================
+ /*
+ * ==========================
+ * this is only for test, should be masked
+ * ==========================
+ */
- // read and filter out unreasonable value
- tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
+ /* read and filter out unreasonable value */
+ tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); /* 0x12: RF Reg[10:7] */
RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
if(tmpRegA < 3 || tmpRegA > 13)
return;
- if(tmpRegA >= 12) // if over 12, TP will be bad when high temperature
+ if(tmpRegA >= 12) /* if over 12, TP will be bad when high temperature */
tmpRegA = 12;
RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
- priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
- priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
+ priv->ThermalMeter[0] = ThermalMeterVal; /* We use fixed value by Bryant's suggestion */
+ priv->ThermalMeter[1] = ThermalMeterVal; /* We use fixed value by Bryant's suggestion */
- //Get current RF-A temperature index
- if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temperature
+ /* Get current RF-A temperature index */
+ if(priv->ThermalMeter[0] >= (u8)tmpRegA) /* lower temperature */
{
tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
tmpCCK40Mindex = tmpCCK20Mindex - 6;
@@ -800,16 +803,16 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
else
{
tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
- if(tmpval >= 6) // higher temperature
- tmpOFDMindex = tmpCCK20Mindex = 0; // max to +6dB
+ if(tmpval >= 6) /* higher temperature */
+ tmpOFDMindex = tmpCCK20Mindex = 0; /* max to +6dB */
else
tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
tmpCCK40Mindex = 0;
}
- //DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
- //((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
- //tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);
- if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) //40M
+ /*DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
+ ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
+ tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);*/
+ if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) /* 40M */
tmpCCKindex = tmpCCK40Mindex;
else
tmpCCKindex = tmpCCK20Mindex;
@@ -833,7 +836,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
if(CCKSwingNeedUpdate)
{
- //DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);
+ /*DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);*/
dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
}
if(priv->OFDM_index != tmpOFDMindex)
@@ -864,7 +867,7 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
- //Initial the Tx BB index and mapping value
+ /* Initial the Tx BB index and mapping value */
priv->txbbgain_table[0].txbb_iq_amplifygain = 12;
priv->txbbgain_table[0].txbbgain_value=0x7f8001fe;
priv->txbbgain_table[1].txbb_iq_amplifygain = 11;
@@ -940,8 +943,10 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
priv->txbbgain_table[36].txbb_iq_amplifygain = -24;
priv->txbbgain_table[36].txbbgain_value=0x10000040;
- //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
- //This Table is for CH1~CH13
+ /*
+ * ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
+ * This Table is for CH1~CH13
+ */
priv->cck_txbbgain_table[0].ccktxbb_valuearray[0] = 0x36;
priv->cck_txbbgain_table[0].ccktxbb_valuearray[1] = 0x35;
priv->cck_txbbgain_table[0].ccktxbb_valuearray[2] = 0x2e;
@@ -1149,8 +1154,10 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
priv->cck_txbbgain_table[22].ccktxbb_valuearray[6] = 0x03;
priv->cck_txbbgain_table[22].ccktxbb_valuearray[7] = 0x01;
- //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
- //This Table is for CH14
+ /*
+ * ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
+ * This Table is for CH14
+ */
priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[0] = 0x36;
priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[1] = 0x35;
priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[2] = 0x2e;
@@ -1368,9 +1375,11 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- // Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire. This mechanism
- // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
- // 3-wire by driver causes RF to go into a wrong state.
+ /*
+ * Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire. This mechanism
+ * can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
+ * 3-wire by driver causes RF to go into a wrong state.
+ */
if(priv->ieee80211->FwRWRF)
priv->btxpower_tracking = TRUE;
else
@@ -1387,7 +1396,7 @@ void dm_initialize_txpower_tracking(struct net_device *dev)
dm_InitializeTXPowerTracking_TSSI(dev);
else
dm_InitializeTXPowerTracking_ThermalMeter(dev);
-}// dm_InitializeTXPowerTracking
+} /* dm_InitializeTXPowerTracking */
static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
@@ -1413,7 +1422,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
static u8 TM_Trigger;
- //DbgPrint("dm_CheckTXPowerTracking() \n");
+ /*DbgPrint("dm_CheckTXPowerTracking() \n");*/
if(!priv->btxpower_tracking)
return;
else
@@ -1427,9 +1436,11 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
if(!TM_Trigger)
{
- //Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash
- //actually write reg0x02 bit1=0, then bit1=1.
- //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
+ /*
+ * Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash
+ * actually write reg0x02 bit1=0, then bit1=1.
+ * DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
+ */
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
@@ -1439,7 +1450,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
}
else
{
- //DbgPrint("Schedule TxPowerTrackingWorkItem\n");
+ /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
TM_Trigger = 0;
}
@@ -1449,7 +1460,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
static void dm_check_txpower_tracking(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //static u32 tx_power_track_counter = 0;
+ /*static u32 tx_power_track_counter = 0;*/
#ifdef RTL8190P
dm_CheckTXPowerTracking_TSSI(dev);
@@ -1460,28 +1471,28 @@ static void dm_check_txpower_tracking(struct net_device *dev)
dm_CheckTXPowerTracking_ThermalMeter(dev);
#endif
-} // dm_CheckTXPowerTracking
+} /* dm_CheckTXPowerTracking */
static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14)
{
u32 TempVal;
struct r8192_priv *priv = ieee80211_priv(dev);
- //Write 0xa22 0xa23
+ /* Write 0xa22 0xa23 */
TempVal = 0;
if(!bInCH14){
- //Write 0xa22 0xa23
+ /* Write 0xa22 0xa23 */
TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
- //Write 0xa24 ~ 0xa27
+ /* Write 0xa24 ~ 0xa27 */
TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) +
(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16)+
(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
- //Write 0xa28 0xa29
+ /* Write 0xa28 0xa29 */
TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
@@ -1493,13 +1504,13 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14)
(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
- //Write 0xa24 ~ 0xa27
+ /* Write 0xa24 ~ 0xa27 */
TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) +
(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16)+
(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
- //Write 0xa28 0xa29
+ /* Write 0xa28 0xa29 */
TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
@@ -1517,13 +1528,13 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
TempVal = 0;
if(!bInCH14)
{
- //Write 0xa22 0xa23
+ /* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter1, TempVal);
- //Write 0xa24 ~ 0xa27
+ /* Write 0xa24 ~ 0xa27 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16)+
@@ -1531,7 +1542,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter2, TempVal);
- //Write 0xa28 0xa29
+ /* Write 0xa28 0xa29 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
@@ -1541,15 +1552,15 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
}
else
{
-// priv->CCKTxPowerAdjustCntNotCh14++; //cosa add for debug.
- //Write 0xa22 0xa23
+ /*priv->CCKTxPowerAdjustCntNotCh14++; cosa add for debug.*/
+ /* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
(CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter1, TempVal);
- //Write 0xa24 ~ 0xa27
+ /* Write 0xa24 ~ 0xa27 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][2] +
(CCKSwingTable_Ch14[priv->CCK_index][3]<<8) +
(CCKSwingTable_Ch14[priv->CCK_index][4]<<16)+
@@ -1557,7 +1568,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter2, TempVal);
- //Write 0xa28 0xa29
+ /* Write 0xa28 0xa29 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] +
(CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
@@ -1570,7 +1581,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
void dm_cck_txpower_adjust(struct net_device *dev, bool binch14)
-{ // dm_CCKTxPowerAdjust
+{ /* dm_CCKTxPowerAdjust */
struct r8192_priv *priv = ieee80211_priv(dev);
if(priv->bDcut == TRUE)
@@ -1600,7 +1611,7 @@ static void dm_txpower_reset_recovery(
RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFC_txPowerTrackingIndex is %x\n",priv->rfc_txpowertrackingindex);
RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain);
-} // dm_TXPowerResetRecovery
+} /* dm_TXPowerResetRecovery */
void dm_restore_dynamic_mechanism_state(struct net_device *dev)
{
@@ -1613,12 +1624,10 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev)
return;
}
- //
- // Restore previous state for rate adaptive
- //
+ /* Restore previous state for rate adaptive */
if(priv->rate_adaptive.rate_adaptive_disabled)
return;
- // TODO: Only 11n mode is implemented currently,
+ /* TODO: Only 11n mode is implemented currently, */
if(!(priv->ieee80211->mode==WIRELESS_MODE_N_24G ||
priv->ieee80211->mode==WIRELESS_MODE_N_5G))
return;
@@ -1626,38 +1635,36 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev)
/* 2007/11/15 MH Copy from 8190PCI. */
u32 ratr_value;
ratr_value = reg_ratr;
- if(priv->rf_type == RF_1T2R) // 1T2R, Spatial Stream 2 should be disabled
+ if(priv->rf_type == RF_1T2R) /* 1T2R, Spatial Stream 2 should be disabled */
{
ratr_value &= ~(RATE_ALL_OFDM_2SS);
- //DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);
+ /*DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);*/
}
- //DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);
- //cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);
+ /*DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);*/
+ /*cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);*/
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
}
- //Restore TX Power Tracking Index
+ /* Restore TX Power Tracking Index */
if (priv->btxpower_trackingInit && priv->btxpower_tracking)
dm_txpower_reset_recovery(dev);
- //
- //Restore BB Initial Gain
- //
+ /* Restore BB Initial Gain */
dm_bb_initialgain_restore(dev);
-} // DM_RestoreDynamicMechanismState
+} /* DM_RestoreDynamicMechanismState */
static void dm_bb_initialgain_restore(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- u32 bit_mask = 0x7f; //Bit0~ Bit6
+ u32 bit_mask = 0x7f; /* Bit0~ Bit6 */
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
return;
- //Disable Initial Gain
- //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
+ /* Disable Initial Gain */
+ /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bit_mask, (u32)priv->initgain_backup.xaagccore1);
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bit_mask, (u32)priv->initgain_backup.xbagccore1);
rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bit_mask, (u32)priv->initgain_backup.xcagccore1);
@@ -1670,36 +1677,36 @@ static void dm_bb_initialgain_restore(struct net_device *dev)
RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
- //Enable Initial Gain
- //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
+ /* Enable Initial Gain */
+ /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);*/
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite. */
-} // dm_BBInitialGainRestore
+} /* dm_BBInitialGainRestore */
void dm_backup_dynamic_mechanism_state(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- // Fsync to avoid reset
+ /* Fsync to avoid reset */
priv->bswitch_fsync = false;
priv->bfsync_processing = false;
- //Backup BB InitialGain
+ /* Backup BB InitialGain */
dm_bb_initialgain_backup(dev);
-} // DM_BackupDynamicMechanismState
+} /* DM_BackupDynamicMechanismState */
static void dm_bb_initialgain_backup(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- u32 bit_mask = bMaskByte0; //Bit0~ Bit6
+ u32 bit_mask = bMaskByte0; /* Bit0~ Bit6 */
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
return;
- //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
+ /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bit_mask);
priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bit_mask);
priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bit_mask);
@@ -1713,7 +1720,7 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
-} // dm_BBInitialGainBakcup
+} /* dm_BBInitialGainBakcup */
#endif
/*-----------------------------------------------------------------------------
@@ -1824,7 +1831,7 @@ static void dm_dig_init(struct net_device *dev)
/* 2007/10/05 MH Disable DIG scheme now. Not tested. */
dm_digtable.dig_enable_flag = true;
dm_digtable.dig_algorithm = DIG_ALGO_BY_RSSI;
- dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
+ dm_digtable.dbg_mode = DM_DBG_OFF; /* off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig */
dm_digtable.dig_algorithm_switch = 0;
/* 2007/10/04 MH Define init gain threshold. */
@@ -1838,7 +1845,7 @@ static void dm_dig_init(struct net_device *dev)
dm_digtable.rssi_high_power_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
dm_digtable.rssi_high_power_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
- dm_digtable.rssi_val = 50; //for new dig debug rssi value
+ dm_digtable.rssi_val = 50; /* for new dig debug rssi value */
dm_digtable.backoff_val = DM_DIG_BACKOFF;
dm_digtable.rx_gain_range_max = DM_DIG_MAX;
if(priv->CustomerID == RT_CID_819x_Netcore)
@@ -1876,7 +1883,7 @@ static void dm_ctrl_initgain_byrssi(struct net_device *dev)
dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev);
else if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
dm_ctrl_initgain_byrssi_by_driverrssi(dev);
-// ;
+ /* ; */
else
return;
}
@@ -1892,15 +1899,16 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
if (dm_digtable.dig_enable_flag == false)
return;
- //DbgPrint("Dig by Sw Rssi \n");
- if(dm_digtable.dig_algorithm_switch) // if switched algorithm, we have to disable FW Dig.
+ /*DbgPrint("Dig by Sw Rssi \n");*/
+ if(dm_digtable.dig_algorithm_switch) /* if switched algorithm, we have to disable FW Dig. */
fw_dig = 0;
- if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled
- {// FW DIG Off
+ if(fw_dig <= 3)
+ { /* execute several times to make sure the FW Dig is disabled */
+ /* FW DIG Off */
for(i=0; i<3; i++)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
fw_dig++;
- dm_digtable.dig_state = DM_STA_DIG_OFF; //fw dig off.
+ dm_digtable.dig_state = DM_STA_DIG_OFF; /* fw dig off. */
}
if(priv->ieee80211->state == IEEE80211_LINKED)
@@ -1908,12 +1916,12 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
else
dm_digtable.cur_connect_state = DIG_DISCONNECT;
- //DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d \n",
- //DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);
+ /*DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d \n",
+ DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);*/
if(dm_digtable.dbg_mode == DM_DBG_OFF)
dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
- //DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);
+ /*DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);*/
dm_initial_gain(dev);
dm_pd_th(dev);
dm_cs_ratio(dev);
@@ -1936,23 +1944,23 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
if(dm_digtable.dig_algorithm_switch)
{
dm_digtable.dig_state = DM_STA_DIG_MAX;
- // Fw DIG On.
+ /* Fw DIG On. */
for(i=0; i<3; i++)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite.*/
dm_digtable.dig_algorithm_switch = 0;
}
if (priv->ieee80211->state != IEEE80211_LINKED)
return;
- // For smooth, we can not change DIG state.
+ /* For smooth, we can not change DIG state. */
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_low_thresh) &&
(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh))
{
return;
}
- //DbgPrint("Dig by Fw False Alarm\n");
- //if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)
+ /*DbgPrint("Dig by Fw False Alarm\n");*/
+ /*if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)*/
/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
@@ -1972,42 +1980,42 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
reset_cnt = priv->reset_count;
}
- // If DIG is off, DIG high power state must reset.
+ /* If DIG is off, DIG high power state must reset. */
dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
dm_digtable.dig_state = DM_STA_DIG_OFF;
- // 1.1 DIG Off.
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
+ /* 1.1 DIG Off. */
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
- // 1.2 Set initial gain.
+ /* 1.2 Set initial gain. */
write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x17);
write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x17);
write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x17);
write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x17);
- // 1.3 Lower PD_TH for OFDM.
+ /* 1.3 Lower PD_TH for OFDM. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
- /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
- // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ /*
+ * 2008/01/11 MH 40MHZ 90/92 register are not the same.
+ * 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ */
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
+ else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+ else
+ PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
*/
- //else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
-
-
- //else
- //PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
}
else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- // 1.4 Lower CS ratio for CCK.
+ /* 1.4 Lower CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0x08);
- // 1.5 Higher EDCCA.
- //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325);
+ /* 1.5 Higher EDCCA. */
+ /*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325);*/
return;
}
@@ -2033,10 +2041,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
}
dm_digtable.dig_state = DM_STA_DIG_ON;
- //DbgPrint("DIG ON\n\r");
+ /*DbgPrint("DIG ON\n\r");*/
- // 2.1 Set initial gain.
- // 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
+ /*
+ * 2.1 Set initial gain.
+ * 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
+ */
if (reset_flag == 1)
{
write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x2c);
@@ -2052,33 +2062,36 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x20);
}
- // 2.2 Higher PD_TH for OFDM.
+ /* 2.2 Higher PD_TH for OFDM. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
- /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
- // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ /*
+ * 2008/01/11 MH 40MHZ 90/92 register are not the same.
+ * 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ */
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
/*
else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+ else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+ else
+ PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
*/
- //else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
-
- //else
- //PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
}
else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
- // 2.3 Higher CS ratio for CCK.
+ /* 2.3 Higher CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0xcd);
- // 2.4 Lower EDCCA.
- /* 2008/01/11 MH 90/92 series are the same. */
- //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);
+ /*
+ * 2.4 Lower EDCCA.
+ * 2008/01/11 MH 90/92 series are the same.
+ */
+ /*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);*/
- // 2.5 DIG On.
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
+ /* 2.5 DIG On. */
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite. */
}
@@ -2109,16 +2122,19 @@ static void dm_ctrl_initgain_byrssi_highpwr(
struct r8192_priv *priv = ieee80211_priv(dev);
static u32 reset_cnt_highpwr;
- // For smooth, we can not change high power DIG state in the range.
+ /* For smooth, we can not change high power DIG state in the range. */
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) &&
(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
{
return;
}
- /* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
- it is larger than a threshold and then execute the step below. */
- // 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
+ /*
+ * 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
+ * it is larger than a threshold and then execute the step below.
+ *
+ * 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
+ */
if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
{
if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON &&
@@ -2127,7 +2143,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
else
dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
- // 3.1 Higher PD_TH for OFDM for high power state.
+ /* 3.1 Higher PD_TH for OFDM for high power state. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
@@ -2151,7 +2167,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh)
{
- // 3.2 Recover PD_TH for OFDM for normal power region.
+ /* 3.2 Recover PD_TH for OFDM for normal power region. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
@@ -2196,7 +2212,7 @@ static void dm_initial_gain(
else
dm_digtable.cur_ig_value = dm_digtable.rssi_val+10-dm_digtable.backoff_val;
}
- else //current state is disconnected
+ else /* current state is disconnected */
{
if(dm_digtable.cur_ig_value == 0)
dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
@@ -2204,14 +2220,14 @@ static void dm_initial_gain(
dm_digtable.cur_ig_value = dm_digtable.pre_ig_value;
}
}
- else // disconnected -> connected or connected -> disconnected
+ else /* disconnected -> connected or connected -> disconnected */
{
dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
dm_digtable.pre_ig_value = 0;
}
- //DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);
+ /*DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);*/
- // if silent reset happened, we should rewrite the values back
+ /* if silent reset happened, we should rewrite the values back */
if(priv->reset_count != reset_cnt)
{
force_write = 1;
@@ -2227,8 +2243,8 @@ static void dm_initial_gain(
|| !initialized || force_write)
{
initial_gain = (u8)dm_digtable.cur_ig_value;
- //DbgPrint("Write initial gain = 0x%x\n", initial_gain);
- // Set initial gain.
+ /*DbgPrint("Write initial gain = 0x%x\n", initial_gain);*/
+ /* Set initial gain. */
write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
@@ -2272,12 +2288,12 @@ static void dm_pd_th(
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
}
}
- else // disconnected -> connected or connected -> disconnected
+ else /* disconnected -> connected or connected -> disconnected */
{
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
}
- // if silent reset happened, we should rewrite the values back
+ /* if silent reset happened, we should rewrite the values back */
if(priv->reset_count != reset_cnt)
{
force_write = 1;
@@ -2288,14 +2304,16 @@ static void dm_pd_th(
if((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
(initialized<=3) || force_write)
{
- //DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);
+ /*DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);*/
if(dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER)
{
- // Lower PD_TH for OFDM.
+ /* Lower PD_TH for OFDM. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
- /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
- // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ /*
+ * 2008/01/11 MH 40MHZ 90/92 register are not the same.
+ * 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ */
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
@@ -2306,11 +2324,13 @@ static void dm_pd_th(
}
else if(dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER)
{
- // Higher PD_TH for OFDM.
+ /* Higher PD_TH for OFDM. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
- /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
- // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ /*
+ * 2008/01/11 MH 40MHZ 90/92 register are not the same.
+ * 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
+ */
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
@@ -2321,7 +2341,7 @@ static void dm_pd_th(
}
else if(dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER)
{
- // Higher PD_TH for OFDM for high power state.
+ /* Higher PD_TH for OFDM for high power state. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
@@ -2369,12 +2389,12 @@ static void dm_cs_ratio(
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
}
}
- else // disconnected -> connected or connected -> disconnected
+ else /* disconnected -> connected or connected -> disconnected */
{
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
}
- // if silent reset happened, we should rewrite the values back
+ /* if silent reset happened, we should rewrite the values back */
if(priv->reset_count != reset_cnt)
{
force_write = 1;
@@ -2386,15 +2406,15 @@ static void dm_cs_ratio(
if((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
!initialized || force_write)
{
- //DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);
+ /*DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);*/
if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER)
{
- // Lower CS ratio for CCK.
+ /* Lower CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0x08);
}
else if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_HIGHER)
{
- // Higher CS ratio for CCK.
+ /* Higher CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0xcd);
}
dm_digtable.precs_ratio_state = dm_digtable.curcs_ratio_state;
@@ -2411,41 +2431,41 @@ void dm_init_edca_turbo(struct net_device *dev)
priv->bcurrent_turbo_EDCA = false;
priv->ieee80211->bis_any_nonbepkts = false;
priv->bis_cur_rdlstate = false;
-} // dm_init_edca_turbo
+} /* dm_init_edca_turbo */
static void dm_check_edca_turbo(
struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
- //PSTA_QOS pStaQos = pMgntInfo->pStaQos;
+ /*PSTA_QOS pStaQos = pMgntInfo->pStaQos;*/
- // Keep past Tx/Rx packet count for RT-to-RT EDCA turbo.
+ /* Keep past Tx/Rx packet count for RT-to-RT EDCA turbo. */
static unsigned long lastTxOkCnt;
static unsigned long lastRxOkCnt;
unsigned long curTxOkCnt = 0;
unsigned long curRxOkCnt = 0;
- //
- // Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters
- // should follow the settings from QAP. By Bruce, 2007-12-07.
- //
+ /*
+ * Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters
+ * should follow the settings from QAP. By Bruce, 2007-12-07.
+ */
if(priv->ieee80211->state != IEEE80211_LINKED)
goto dm_CheckEdcaTurbo_EXIT;
- // We do not turn on EDCA turbo mode for some AP that has IOT issue
+ /* We do not turn on EDCA turbo mode for some AP that has IOT issue */
if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
goto dm_CheckEdcaTurbo_EXIT;
-// printk("========>%s():bis_any_nonbepkts is %d\n",__func__,priv->bis_any_nonbepkts);
- // Check the status for current condition.
+ /*printk("========>%s():bis_any_nonbepkts is %d\n",__func__,priv->bis_any_nonbepkts);*/
+ /* Check the status for current condition. */
if(!priv->ieee80211->bis_any_nonbepkts)
{
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
- // For RT-AP, we needs to turn it on when Rx>Tx
+ /* For RT-AP, we needs to turn it on when Rx>Tx */
if(curRxOkCnt > 4*curTxOkCnt)
{
- //printk("%s():curRxOkCnt > 4*curTxOkCnt\n");
+ /*printk("%s():curRxOkCnt > 4*curTxOkCnt\n");*/
if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
{
write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
@@ -2455,7 +2475,7 @@ static void dm_check_edca_turbo(
else
{
- //printk("%s():curRxOkCnt < 4*curTxOkCnt\n");
+ /*printk("%s():curRxOkCnt < 4*curTxOkCnt\n");*/
if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
{
write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
@@ -2468,10 +2488,10 @@ static void dm_check_edca_turbo(
}
else
{
- //
- // Turn Off EDCA turbo here.
- // Restore original EDCA according to the declaration of AP.
- //
+ /*
+ * Turn Off EDCA turbo here.
+ * Restore original EDCA according to the declaration of AP.
+ */
if(priv->bcurrent_turbo_EDCA)
{
@@ -2481,30 +2501,32 @@ static void dm_check_edca_turbo(
struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
u8 mode = priv->ieee80211->mode;
- // For Each time updating EDCA parameter, reset EDCA turbo mode status.
+ /* For Each time updating EDCA parameter, reset EDCA turbo mode status. */
dm_init_edca_turbo(dev);
u1bAIFS = qos_parameters->aifs[0] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[0]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
(((u32)(qos_parameters->cw_max[0]))<< AC_PARAM_ECW_MAX_OFFSET)|
(((u32)(qos_parameters->cw_min[0]))<< AC_PARAM_ECW_MIN_OFFSET)|
((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
- //write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
+ /*write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);*/
write_nic_dword(dev, EDCAPARA_BE, u4bAcParam);
- // Check ACM bit.
- // If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
+ /*
+ * Check ACM bit.
+ * If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
+ */
{
- // TODO: Modified this part and try to set acm control in only 1 IO processing!!
+ /* TODO: Modified this part and try to set acm control in only 1 IO processing!! */
PACI_AIFSN pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]);
u8 AcmCtrl;
read_nic_byte(dev, AcmHwCtrl, &AcmCtrl);
if(pAciAifsn->f.ACM)
- { // ACM bit is 1.
+ { /* ACM bit is 1. */
AcmCtrl |= AcmHw_BeqEn;
}
else
- { // ACM bit is 0.
+ { /* ACM bit is 0. */
AcmCtrl &= (~AcmHw_BeqEn);
}
@@ -2518,11 +2540,11 @@ static void dm_check_edca_turbo(
dm_CheckEdcaTurbo_EXIT:
- // Set variables for next time.
+ /* Set variables for next time. */
priv->ieee80211->bis_any_nonbepkts = false;
lastTxOkCnt = priv->stats.txbytesunicast;
lastRxOkCnt = priv->stats.rxbytesunicast;
-} // dm_CheckEdcaTurbo
+} /* dm_CheckEdcaTurbo */
static void dm_init_ctstoself(struct net_device *dev)
{
@@ -2556,12 +2578,12 @@ static void dm_ctstoself(struct net_device *dev)
{
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
- if(curRxOkCnt > 4*curTxOkCnt) //downlink, disable CTS to self
+ if(curRxOkCnt > 4*curTxOkCnt) /* downlink, disable CTS to self */
{
pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
- //DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");
+ /*DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");*/
}
- else //uplink
+ else /* uplink */
{
pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
}
@@ -2599,8 +2621,10 @@ static void dm_check_pbc_gpio(struct net_device *dev)
if (tmp1byte&BIT6 || tmp1byte&BIT0)
{
- // Here we only set bPbcPressed to TRUE
- // After trigger PBC, the variable will be set to FALSE
+ /*
+ * Here we only set bPbcPressed to TRUE
+ * After trigger PBC, the variable will be set to FALSE
+ */
RT_TRACE(COMP_IO, "CheckPbcGPIO - PBC is pressed\n");
priv->bpbc_pressed = true;
}
@@ -2628,7 +2652,7 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,rfpath_check_wq);
struct net_device *dev =priv->ieee80211->dev;
- //bool bactually_set = false;
+ /*bool bactually_set = false;*/
u8 rfpath = 0, i;
@@ -2636,7 +2660,7 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
always be the same. We only read 0xc04 now. */
read_nic_byte(dev, 0xc04, &rfpath);
- // Check Bit 0-3, it means if RF A-D is enabled.
+ /* Check Bit 0-3, it means if RF A-D is enabled. */
for (i = 0; i < RF90_PATH_MAX; i++)
{
if (rfpath & (0x01<<i))
@@ -2654,7 +2678,7 @@ static void dm_init_rxpath_selection(struct net_device *dev)
{
u8 i;
struct r8192_priv *priv = ieee80211_priv(dev);
- DM_RxPathSelTable.Enable = 1; //default enabled
+ DM_RxPathSelTable.Enable = 1; /* default enabled */
DM_RxPathSelTable.SS_TH_low = RxPathSelection_SS_TH_low;
DM_RxPathSelTable.diff_TH = RxPathSelection_diff_TH;
if(priv->CustomerID == RT_CID_819x_Netcore)
@@ -2676,8 +2700,8 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u8 i, max_rssi_index=0, min_rssi_index=0, sec_rssi_index=0, rf_num=0;
u8 tmp_max_rssi=0, tmp_min_rssi=0, tmp_sec_rssi=0;
- u8 cck_default_Rx=0x2; //RF-C
- u8 cck_optional_Rx=0x3;//RF-D
+ u8 cck_default_Rx=0x2; /* RF-C */
+ u8 cck_optional_Rx=0x3; /* RF-D */
long tmp_cck_max_pwdb=0, tmp_cck_min_pwdb=0, tmp_cck_sec_pwdb=0;
u8 cck_rx_ver2_max_index=0, cck_rx_ver2_min_index=0, cck_rx_ver2_sec_index=0;
u8 cur_rf_rssi;
@@ -2700,11 +2724,11 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
if(priv->ieee80211->mode == WIRELESS_MODE_B)
{
- DM_RxPathSelTable.cck_method = CCK_Rx_Version_2; //pure B mode, fixed cck version2
- //DbgPrint("Pure B mode, use cck rx version2 \n");
+ DM_RxPathSelTable.cck_method = CCK_Rx_Version_2; /* pure B mode, fixed cck version2 */
+ /*DbgPrint("Pure B mode, use cck rx version2 \n");*/
}
- //decide max/sec/min rssi index
+ /* decide max/sec/min rssi index */
for (i=0; i<RF90_PATH_MAX; i++)
{
if(!DM_RxPathSelTable.DbgMode)
@@ -2715,13 +2739,14 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
rf_num++;
cur_rf_rssi = DM_RxPathSelTable.rf_rssi[i];
- if(rf_num == 1) // find first enabled rf path and the rssi values
- { //initialize, set all rssi index to the same one
+ if(rf_num == 1)
+ { /* find first enabled rf path and the rssi values */
+ /* initialize, set all rssi index to the same one */
max_rssi_index = min_rssi_index = sec_rssi_index = i;
tmp_max_rssi = tmp_min_rssi = tmp_sec_rssi = cur_rf_rssi;
}
else if(rf_num == 2)
- { // we pick up the max index first, and let sec and min to be the same one
+ { /* we pick up the max index first, and let sec and min to be the same one */
if(cur_rf_rssi >= tmp_max_rssi)
{
tmp_max_rssi = cur_rf_rssi;
@@ -2743,7 +2768,7 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
max_rssi_index = i;
}
else if(cur_rf_rssi == tmp_max_rssi)
- { // let sec and min point to the different index
+ { /* let sec and min point to the different index */
tmp_sec_rssi = cur_rf_rssi;
sec_rssi_index = i;
}
@@ -2755,29 +2780,29 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
else if(cur_rf_rssi == tmp_sec_rssi)
{
if(tmp_sec_rssi == tmp_min_rssi)
- { // let sec and min point to the different index
+ { /* let sec and min point to the different index */
tmp_sec_rssi = cur_rf_rssi;
sec_rssi_index = i;
}
else
{
- // This case we don't need to set any index
+ /* This case we don't need to set any index */
}
}
else if((cur_rf_rssi < tmp_sec_rssi) && (cur_rf_rssi > tmp_min_rssi))
{
- // This case we don't need to set any index
+ /* This case we don't need to set any index */
}
else if(cur_rf_rssi == tmp_min_rssi)
{
if(tmp_sec_rssi == tmp_min_rssi)
- { // let sec and min point to the different index
+ { /* let sec and min point to the different index */
tmp_min_rssi = cur_rf_rssi;
min_rssi_index = i;
}
else
{
- // This case we don't need to set any index
+ /* This case we don't need to set any index */
}
}
else if(cur_rf_rssi < tmp_min_rssi)
@@ -2790,7 +2815,7 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
}
rf_num = 0;
- // decide max/sec/min cck pwdb index
+ /* decide max/sec/min cck pwdb index */
if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
{
for (i=0; i<RF90_PATH_MAX; i++)
@@ -2800,13 +2825,13 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
rf_num++;
cur_cck_pwdb = DM_RxPathSelTable.cck_pwdb_sta[i];
- if(rf_num == 1) // find first enabled rf path and the rssi values
- { //initialize, set all rssi index to the same one
+ if(rf_num == 1) /* find first enabled rf path and the rssi values */
+ { /* initialize, set all rssi index to the same one */
cck_rx_ver2_max_index = cck_rx_ver2_min_index = cck_rx_ver2_sec_index = i;
tmp_cck_max_pwdb = tmp_cck_min_pwdb = tmp_cck_sec_pwdb = cur_cck_pwdb;
}
else if(rf_num == 2)
- { // we pick up the max index first, and let sec and min to be the same one
+ { /* we pick up the max index first, and let sec and min to be the same one */
if(cur_cck_pwdb >= tmp_cck_max_pwdb)
{
tmp_cck_max_pwdb = cur_cck_pwdb;
@@ -2828,7 +2853,7 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
cck_rx_ver2_max_index = i;
}
else if(cur_cck_pwdb == tmp_cck_max_pwdb)
- { // let sec and min point to the different index
+ { /* let sec and min point to the different index */
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
}
@@ -2840,29 +2865,29 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
else if(cur_cck_pwdb == tmp_cck_sec_pwdb)
{
if(tmp_cck_sec_pwdb == tmp_cck_min_pwdb)
- { // let sec and min point to the different index
+ { /* let sec and min point to the different index */
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
}
else
{
- // This case we don't need to set any index
+ /* This case we don't need to set any index */
}
}
else if((cur_cck_pwdb < tmp_cck_sec_pwdb) && (cur_cck_pwdb > tmp_cck_min_pwdb))
{
- // This case we don't need to set any index
+ /* This case we don't need to set any index */
}
else if(cur_cck_pwdb == tmp_cck_min_pwdb)
{
if(tmp_cck_sec_pwdb == tmp_cck_min_pwdb)
- { // let sec and min point to the different index
+ { /* let sec and min point to the different index */
tmp_cck_min_pwdb = cur_cck_pwdb;
cck_rx_ver2_min_index = i;
}
else
{
- // This case we don't need to set any index
+ /* This case we don't need to set any index */
}
}
else if(cur_cck_pwdb < tmp_cck_min_pwdb)
@@ -2877,8 +2902,10 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
}
- // Set CCK Rx path
- // reg0xA07[3:2]=cck default rx path, reg0xa07[1:0]=cck optional rx path.
+ /*
+ * Set CCK Rx path
+ * reg0xA07[3:2]=cck default rx path, reg0xa07[1:0]=cck optional rx path.
+ */
update_cck_rx_path = 0;
if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
{
@@ -2892,11 +2919,11 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
{
if((tmp_max_rssi - tmp_min_rssi) >= DM_RxPathSelTable.diff_TH)
{
- //record the enabled rssi threshold
+ /* record the enabled rssi threshold */
DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] = tmp_max_rssi+5;
- //disable the BB Rx path, OFDM
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0); // 0xc04[3:0]
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0); // 0xd04[3:0]
+ /* disable the BB Rx path, OFDM */
+ rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0); /* 0xc04[3:0] */
+ rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0); /* 0xd04[3:0] */
disabled_rf_cnt++;
}
if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_1)
@@ -2918,14 +2945,14 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
{
for(i=0; i<4; i++)
{
- if((DM_RxPathSelTable.disabledRF>>i) & 0x1) //disabled rf
+ if((DM_RxPathSelTable.disabledRF>>i) & 0x1) /* disabled rf */
{
if(tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i])
{
- //enable the BB Rx path
- //DbgPrint("RF-%d is enabled. \n", 0x1<<i);
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); // 0xc04[3:0]
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); // 0xd04[3:0]
+ /* enable the BB Rx path */
+ /*DbgPrint("RF-%d is enabled. \n", 0x1<<i);*/
+ rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); /* 0xc04[3:0] */
+ rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); /* 0xd04[3:0] */
DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
disabled_rf_cnt--;
}
@@ -2969,7 +2996,7 @@ static void dm_init_fsync (struct net_device *dev)
priv->ieee80211->fsync_firstdiff_ratethreshold= 100;
priv->ieee80211->fsync_seconddiff_ratethreshold= 200;
priv->ieee80211->fsync_state = Default_Fsync;
- priv->framesyncMonitor = 1; // current default 0xc38 monitor on
+ priv->framesyncMonitor = 1; /* current default 0xc38 monitor on */
init_timer(&priv->fsync_timer);
priv->fsync_timer.data = (unsigned long)dev;
@@ -2995,7 +3022,7 @@ void dm_fsync_timer_callback(unsigned long data)
priv->ieee80211->bfsync_enable &&
(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC))
{
- // Count rate 54, MCS [7], [12, 13, 14, 15]
+ /* Count rate 54, MCS [7], [12, 13, 14, 15] */
u32 rate_bitmap;
for(rate_index = 0; rate_index <= 27; rate_index++)
{
@@ -3012,13 +3039,13 @@ void dm_fsync_timer_callback(unsigned long data)
{
u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
- // Continue count
+ /* Continue count */
if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
priv->ContinueDiffCount++;
else
priv->ContinueDiffCount = 0;
- // Continue count over
+ /* Continue count over */
if(priv->ContinueDiffCount >=2)
{
bSwitchFromCountDiff = true;
@@ -3027,11 +3054,11 @@ void dm_fsync_timer_callback(unsigned long data)
}
else
{
- // Stop the continued count
+ /* Stop the continued count */
priv->ContinueDiffCount = 0;
}
- //If Count diff <= FsyncRateCountThreshold
+ /* If Count diff <= FsyncRateCountThreshold */
if(rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold)
{
bSwitchFromCountDiff = true;
@@ -3040,7 +3067,7 @@ void dm_fsync_timer_callback(unsigned long data)
priv->rate_record = rate_count;
priv->rateCountDiffRecord = rate_count_diff;
RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
- // if we never receive those mcs rate and rssi > 30 % then switch fsyn
+ /* if we never receive those mcs rate and rssi > 30 % then switch fsyn */
if(priv->undecorated_smoothed_pwdb > priv->ieee80211->fsync_rssi_threshold && bSwitchFromCountDiff)
{
bDoubleTimeInterval = true;
@@ -3080,7 +3107,7 @@ void dm_fsync_timer_callback(unsigned long data)
}
else
{
- // Let Register return to default value;
+ /* Let Register return to default value; */
if(priv->bswitch_fsync)
{
priv->bswitch_fsync = false;
@@ -3108,7 +3135,7 @@ static void dm_EndSWFsync(struct net_device *dev)
RT_TRACE(COMP_HALDM, "%s\n", __func__);
del_timer_sync(&(priv->fsync_timer));
- // Let Register return to default value;
+ /* Let Register return to default value; */
if(priv->bswitch_fsync)
{
priv->bswitch_fsync = false;
@@ -3130,9 +3157,9 @@ static void dm_StartSWFsync(struct net_device *dev)
u32 rateBitmap;
RT_TRACE(COMP_HALDM, "%s\n", __func__);
- // Initial rate record to zero, start to record.
+ /* Initial rate record to zero, start to record. */
priv->rate_record = 0;
- // Initialize continue diff count to zero, start to record.
+ /* Initialize continue diff count to zero, start to record. */
priv->ContinueDiffCount = 0;
priv->rateCountDiffRecord = 0;
priv->bswitch_fsync = false;
@@ -3176,7 +3203,7 @@ void dm_check_fsync(struct net_device *dev)
#define RegC38_NonFsync_Other_AP 1
#define RegC38_Fsync_AP_BCM 2
struct r8192_priv *priv = ieee80211_priv(dev);
- //u32 framesyncC34;
+ /*u32 framesyncC34;*/
static u8 reg_c38_State=RegC38_Default;
static u32 reset_cnt;
@@ -3226,7 +3253,7 @@ void dm_check_fsync(struct net_device *dev)
if(priv->framesyncMonitor)
{
if(reg_c38_State != RegC38_Fsync_AP_BCM)
- { //For broadcom AP we write different default value
+ { /* For broadcom AP we write different default value */
write_nic_byte(dev, rOFDM0_RxDetector3, 0x95);
reg_c38_State = RegC38_Fsync_AP_BCM;
@@ -3269,7 +3296,7 @@ void dm_check_fsync(struct net_device *dev)
{
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- //DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);
+ /*DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);*/
}
}
}
@@ -3279,7 +3306,7 @@ void dm_check_fsync(struct net_device *dev)
{
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- //DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x \n", pHalData->framesync);
+ /*DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x \n", pHalData->framesync);*/
}
}
}
@@ -3287,11 +3314,11 @@ void dm_check_fsync(struct net_device *dev)
if(priv->framesyncMonitor)
{
if(priv->reset_count != reset_cnt)
- { //After silent reset, the reg_c38_State will be returned to default value
+ { /* After silent reset, the reg_c38_State will be returned to default value */
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
reset_cnt = priv->reset_count;
- //DbgPrint("reg_c38_State = 0 for silent reset. \n");
+ /*DbgPrint("reg_c38_State = 0 for silent reset. \n");*/
}
}
else
@@ -3300,7 +3327,7 @@ void dm_check_fsync(struct net_device *dev)
{
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- //DbgPrint("framesync no monitor, write 0xc38 = 0x%x \n", pHalData->framesync);
+ /*DbgPrint("framesync no monitor, write 0xc38 = 0x%x \n", pHalData->framesync);*/
}
}
}
@@ -3331,7 +3358,7 @@ void dm_shadow_init(struct net_device *dev)
for (offset = 0; offset < 256; offset++)
{
read_nic_byte(dev, offset+page*256, &dm_shadow[page][offset]);
- //DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset, DM_Shadow[page][offset]);
+ /*DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset, DM_Shadow[page][offset]);*/
}
for (page = 8; page < 11; page++)
@@ -3366,8 +3393,8 @@ static void dm_init_dynamic_txpower(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code.
- priv->ieee80211->bdynamic_txpower_enable = true; //Default to enable Tx Power Control
+ /* Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. */
+ priv->ieee80211->bdynamic_txpower_enable = true; /* Default to enable Tx Power Control */
priv->bLastDTPFlag_High = false;
priv->bLastDTPFlag_Low = false;
priv->bDynamicTxHighPower = false;
@@ -3385,7 +3412,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
priv->bDynamicTxLowPower = false;
return;
}
- //printk("priv->ieee80211->current_network.unknown_cap_exist is %d ,priv->ieee80211->current_network.broadcom_cap_exist is %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);
+ /*printk("priv->ieee80211->current_network.unknown_cap_exist is %d ,priv->ieee80211->current_network.broadcom_cap_exist is %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);*/
if((priv->ieee80211->current_network.atheros_cap_exist) && (priv->ieee80211->mode == IEEE_G)){
txhipower_threshhold = TX_POWER_ATHEROAP_THRESH_HIGH;
txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
@@ -3396,7 +3423,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
}
-// printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold is %d\n",__func__,txhipower_threshhold,txlowpower_threshold);
+ /*printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold is %d\n",__func__,txhipower_threshhold,txlowpower_threshold);*/
RT_TRACE(COMP_TXAGC,"priv->undecorated_smoothed_pwdb = %ld \n" , priv->undecorated_smoothed_pwdb);
if(priv->ieee80211->state == IEEE80211_LINKED)
@@ -3408,12 +3435,12 @@ static void dm_dynamic_txpower(struct net_device *dev)
}
else
{
- // high power state check
+ /* high power state check */
if(priv->undecorated_smoothed_pwdb < txlowpower_threshold && priv->bDynamicTxHighPower == true)
{
priv->bDynamicTxHighPower = false;
}
- // low power state check
+ /* low power state check */
if(priv->undecorated_smoothed_pwdb < 35)
{
priv->bDynamicTxLowPower = true;
@@ -3426,7 +3453,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
}
else
{
- //pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;
+ /*pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;*/
priv->bDynamicTxHighPower = false;
priv->bDynamicTxLowPower = false;
}
@@ -3441,27 +3468,27 @@ static void dm_dynamic_txpower(struct net_device *dev)
#endif
rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
- //pHalData->bStartTxCtrlByTPCNFR = FALSE; //Clear th flag of Set TX Power from Sitesurvey
+ /*pHalData->bStartTxCtrlByTPCNFR = FALSE; Clear th flag of Set TX Power from Sitesurvey*/
}
priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
} /* dm_dynamic_txpower */
-//added by vivi, for read tx rate and retrycount
+/*added by vivi, for read tx rate and retrycount */
static void dm_check_txrateandretrycount(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
- //for 11n tx rate
-// priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);
+ /* for 11n tx rate */
+ /*priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);*/
read_nic_byte(dev, Current_Tx_Rate_Reg, &ieee->softmac_stats.CurrentShowTxate);
- //printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate);
- //for initial tx rate
-// priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg);
+ /*printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate);*/
+ /* for initial tx rate */
+ /*priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg);*/
read_nic_byte(dev, Initial_Tx_Rate_Reg, &ieee->softmac_stats.last_packet_rate);
- //for tx tx retry count
-// priv->stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg);
+ /* for tx tx retry count */
+ /*priv->stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg);*/
read_nic_dword(dev, Tx_Retry_Count_Reg, &ieee->softmac_stats.txretrycount);
}
@@ -3469,9 +3496,11 @@ static void dm_send_rssi_tofw(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- // If we test chariot, we should stop the TX command ?
- // Because 92E will always silent reset when we send tx command. We use register
- // 0x1e0(byte) to notify driver.
+ /*
+ * If we test chariot, we should stop the TX command ?
+ * Because 92E will always silent reset when we send tx command. We use register
+ * 0x1e0(byte) to notify driver.
+ */
write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
return;
}
--
2.2.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH RESEND 2/4] staging: rtl8192u: fix whitespace and alignment
2015-01-10 14:19 [PATCH RESEND 1/4] staging: rtl8192u: fix comments Lorenzo Stoakes
@ 2015-01-10 14:19 ` Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 3/4] staging: rtl8192u: remove redundant code Lorenzo Stoakes
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Lorenzo Stoakes @ 2015-01-10 14:19 UTC (permalink / raw)
To: gregkh
Cc: anarey, mcgrof, tapaswenipathak, joe, rmfrfs, yejiayily, gdonald,
devel, linux-kernel, Lorenzo Stoakes
This patch fixes warnings/errors raised by checkpatch.pl relating to whitespace
in r8192U_dm.c, removes inconsistent whitespace, and additionally fixes some
vertical alignment issues.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
---
drivers/staging/rtl8192u/r8192U_dm.c | 1606 +++++++++++++---------------------
1 file changed, 625 insertions(+), 981 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index cafc717..862d2ab 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -22,11 +22,12 @@ Major Change History:
#include "r819xU_cmdpkt.h"
/*---------------------------Define Local Constant---------------------------*/
/* Indicate different AP vendor for IOT issue. */
-static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
- { 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f};
-static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
- { 0x5e4322, 0xa44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f};
-
+static u32 edca_setting_DL[HT_IOT_PEER_MAX] = {
+ 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0x00a44f, 0x5ea44f
+};
+static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {
+ 0x5e4322, 0x00a44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f
+};
#define RTK_UL_EDCA 0xa44f
#define RTK_DL_EDCA 0x5e4322
@@ -37,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
/* Debug variable ? */
dig_t dm_digtable;
/* Store current software write register content for MAC PHY. */
-u8 dm_shadow[16][256] = {{0}};
+u8 dm_shadow[16][256] = { {0} };
/* For Dynamic Rx Path Selection by Signal Strength */
DRxPathSel DM_RxPathSelTable;
/*------------------------Define global variable-----------------------------*/
@@ -66,11 +67,8 @@ static void dm_bandwidth_autoswitch(struct net_device *dev);
static void dm_check_txpower_tracking(struct net_device *dev);
-
-
/*static void dm_txpower_reset_recovery(struct net_device *dev);*/
-
/* DM --> Dynamic Init Gain by RSSI */
static void dm_dig_init(struct net_device *dev);
static void dm_ctrl_initgain_byrssi(struct net_device *dev);
@@ -89,13 +87,11 @@ static void dm_check_edca_turbo(struct net_device *dev);
/* DM --> Check PBC */
static void dm_check_pbc_gpio(struct net_device *dev);
-
/* DM --> Check current RX RF path state */
static void dm_check_rx_path_selection(struct net_device *dev);
static void dm_init_rxpath_selection(struct net_device *dev);
static void dm_rxpath_sel_byrssi(struct net_device *dev);
-
/* DM --> Fsync for broadcom ap */
static void dm_init_fsync(struct net_device *dev);
static void dm_deInit_fsync(struct net_device *dev);
@@ -109,7 +105,6 @@ static void dm_check_txrateandretrycount(struct net_device *dev);
static void dm_init_dynamic_txpower(struct net_device *dev);
static void dm_dynamic_txpower(struct net_device *dev);
-
/* DM --> For rate adaptive and DIG, we must send RSSI to firmware */
static void dm_send_rssi_tofw(struct net_device *dev);
static void dm_ctstoself(struct net_device *dev);
@@ -148,14 +143,12 @@ void init_hal_dm(struct net_device *dev)
void deinit_hal_dm(struct net_device *dev)
{
-
dm_deInit_fsync(dev);
-
}
-
#ifdef USB_RX_AGGREGATION_SUPPORT
-void dm_CheckRxAggregation(struct net_device *dev) {
+void dm_CheckRxAggregation(struct net_device *dev)
+{
struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
static unsigned long lastTxOkCnt;
@@ -184,14 +177,15 @@ void dm_CheckRxAggregation(struct net_device *dev) {
if ((curTxOkCnt + curRxOkCnt) < 15000000)
return;
- if(curTxOkCnt > 4*curRxOkCnt) {
+ if (curTxOkCnt > 4*curRxOkCnt) {
if (priv->bCurrentRxAggrEnable) {
write_nic_dword(dev, 0x1a8, 0);
priv->bCurrentRxAggrEnable = false;
}
- }else{
+ } else {
if (!priv->bCurrentRxAggrEnable && !pHTInfo->bCurrentRT2RTAggregation) {
u32 ulValue;
+
ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
(pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
/*
@@ -209,8 +203,6 @@ void dm_CheckRxAggregation(struct net_device *dev) {
} /* dm_CheckEdcaTurbo */
#endif
-
-
void hal_dm_watchdog(struct net_device *dev)
{
/*struct r8192_priv *priv = ieee80211_priv(dev);*/
@@ -237,7 +229,6 @@ void hal_dm_watchdog(struct net_device *dev)
#endif
} /* HalDmWatchDog */
-
/*
* Decide Rate Adaptive Set according to distance (signal strength)
* 01/11/2008 MHC Modify input arguments and RATR table level.
@@ -246,7 +237,6 @@ void hal_dm_watchdog(struct net_device *dev)
*/
void init_rate_adaptive(struct net_device *dev)
{
-
struct r8192_priv *priv = ieee80211_priv(dev);
prate_adaptive pra = (prate_adaptive)&priv->rate_adaptive;
@@ -259,15 +249,13 @@ void init_rate_adaptive(struct net_device *dev)
pra->low_rssi_thresh_for_ra20M = RateAdaptiveTH_Low_20M;
pra->low_rssi_thresh_for_ra40M = RateAdaptiveTH_Low_40M;
- if(priv->CustomerID == RT_CID_819x_Netcore)
+ if (priv->CustomerID == RT_CID_819x_Netcore)
pra->ping_rssi_enable = 1;
else
pra->ping_rssi_enable = 0;
pra->ping_rssi_thresh_for_ra = 15;
-
- if (priv->rf_type == RF_2T4R)
- {
+ if (priv->rf_type == RF_2T4R) {
/*
* 07/10/08 MH Modify for RA smooth scheme.
* 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.
@@ -278,9 +266,7 @@ void init_rate_adaptive(struct net_device *dev)
pra->low_rssi_threshold_ratr_40M = 0x8f0ff005;
pra->low_rssi_threshold_ratr_20M = 0x8f0ff001;
pra->ping_rssi_ratr = 0x0000000d;/* cosa add for test */
- }
- else if (priv->rf_type == RF_1T2R)
- {
+ } else if (priv->rf_type == RF_1T2R) {
pra->upper_rssi_threshold_ratr = 0x000f0000;
pra->middle_rssi_threshold_ratr = 0x000ff000;
pra->low_rssi_threshold_ratr = 0x000ff001;
@@ -291,7 +277,6 @@ void init_rate_adaptive(struct net_device *dev)
} /* InitRateAdaptive */
-
/*-----------------------------------------------------------------------------
* Function: dm_check_rate_adaptive()
*
@@ -318,23 +303,20 @@ static void dm_check_rate_adaptive(struct net_device *dev)
bool bshort_gi_enabled = false;
static u8 ping_rssi_state;
-
- if(!priv->up)
- {
+ if (!priv->up) {
RT_TRACE(COMP_RATE, "<---- dm_check_rate_adaptive(): driver is going to unload\n");
return;
}
- if(pra->rate_adaptive_disabled) /* this variable is set by ioctl. */
+ if (pra->rate_adaptive_disabled) /* this variable is set by ioctl. */
return;
/* TODO: Only 11n mode is implemented currently, */
- if(!(priv->ieee80211->mode == WIRELESS_MODE_N_24G ||
- priv->ieee80211->mode == WIRELESS_MODE_N_5G))
- return;
+ if (!(priv->ieee80211->mode == WIRELESS_MODE_N_24G ||
+ priv->ieee80211->mode == WIRELESS_MODE_N_5G))
+ return;
- if(priv->ieee80211->state == IEEE80211_LINKED)
- {
+ if (priv->ieee80211->state == IEEE80211_LINKED) {
/*RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");*/
/*
@@ -343,88 +325,71 @@ static void dm_check_rate_adaptive(struct net_device *dev)
bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI40MHz) ||
(!pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI20MHz);
-
pra->upper_rssi_threshold_ratr =
- (pra->upper_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+ (pra->upper_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
pra->middle_rssi_threshold_ratr =
- (pra->middle_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+ (pra->middle_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
pra->low_rssi_threshold_ratr =
- (pra->low_rssi_threshold_ratr_40M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
- }
- else
- {
+ (pra->low_rssi_threshold_ratr_40M & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
+ } else {
pra->low_rssi_threshold_ratr =
- (pra->low_rssi_threshold_ratr_20M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+ (pra->low_rssi_threshold_ratr_20M & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
}
/* cosa add for test */
pra->ping_rssi_ratr =
- (pra->ping_rssi_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ;
+ (pra->ping_rssi_ratr & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
/* 2007/10/08 MH We support RA smooth scheme now. When it is the first
time to link with AP. We will not change upper/lower threshold. If
STA stay in high or low level, we must change two different threshold
to prevent jumping frequently. */
- if (pra->ratr_state == DM_RATR_STA_HIGH)
- {
+ if (pra->ratr_state == DM_RATR_STA_HIGH) {
HighRSSIThreshForRA = pra->high2low_rssi_thresh_for_ra;
- LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+ LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) ?
(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
- }
- else if (pra->ratr_state == DM_RATR_STA_LOW)
- {
+ } else if (pra->ratr_state == DM_RATR_STA_LOW) {
HighRSSIThreshForRA = pra->high_rssi_thresh_for_ra;
- LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+ LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) ?
(pra->low2high_rssi_thresh_for_ra40M):(pra->low2high_rssi_thresh_for_ra20M);
- }
- else
- {
+ } else {
HighRSSIThreshForRA = pra->high_rssi_thresh_for_ra;
- LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+ LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) ?
(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
}
/*DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);*/
- if(priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA)
- {
+ if (priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA) {
/*DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_HIGH;
targetRATR = pra->upper_rssi_threshold_ratr;
- }else if(priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA)
- {
+ } else if (priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA) {
/*DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_MIDDLE;
targetRATR = pra->middle_rssi_threshold_ratr;
- }else
- {
+ } else {
/*DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->low_rssi_threshold_ratr;
}
/* cosa add for test */
- if(pra->ping_rssi_enable)
- {
+ if (pra->ping_rssi_enable) {
/*pHalData->UndecoratedSmoothedPWDB = 19;*/
- if(priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5))
- {
- if((priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
- ping_rssi_state)
- {
- /*DbgPrint("TestRSSI = %d, set RATR to 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);*/
+ if (priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5)) {
+ if ((priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
+ ping_rssi_state) {
+ /*DbgPrint("TestRSSI = %d, set RATR to 0x%x\n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);*/
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->ping_rssi_ratr;
ping_rssi_state = 1;
}
/*else
- DbgPrint("TestRSSI is between the range. \n");*/
- }
- else
- {
- /*DbgPrint("TestRSSI Recover to 0x%x \n", targetRATR);*/
+ DbgPrint("TestRSSI is between the range.\n");*/
+ } else {
+ /*DbgPrint("TestRSSI Recover to 0x%x\n", targetRATR);*/
ping_rssi_state = 0;
}
}
@@ -433,20 +398,19 @@ static void dm_check_rate_adaptive(struct net_device *dev)
* 2008.04.01
* For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
*/
- if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))
- targetRATR &= 0xf00fffff;
+ if (priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))
+ targetRATR &= 0xf00fffff;
/*
* Check whether updating of RATR0 is required
*/
read_nic_dword(dev, RATR0, ¤tRATR);
- if(targetRATR != currentRATR)
- {
+ if (targetRATR != currentRATR) {
u32 ratr_value;
+
ratr_value = targetRATR;
- RT_TRACE(COMP_RATE,"currentRATR = %x, targetRATR = %x\n", currentRATR, targetRATR);
- if(priv->rf_type == RF_1T2R)
- {
+ RT_TRACE(COMP_RATE, "currentRATR = %x, targetRATR = %x\n", currentRATR, targetRATR);
+ if (priv->rf_type == RF_1T2R) {
ratr_value &= ~(RATE_ALL_OFDM_2SS);
}
write_nic_dword(dev, RATR0, ratr_value);
@@ -455,15 +419,12 @@ static void dm_check_rate_adaptive(struct net_device *dev)
pra->last_ratr = targetRATR;
}
- }
- else
- {
+ } else {
pra->ratr_state = DM_RATR_STA_MAX;
}
} /* dm_CheckRateAdaptive */
-
static void dm_init_bandwidth_autoswitch(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -475,19 +436,18 @@ static void dm_init_bandwidth_autoswitch(struct net_device *dev)
} /* dm_init_bandwidth_autoswitch */
-
static void dm_bandwidth_autoswitch(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 ||!priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable){
+ if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable) {
return;
- }else{
- if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false){ /* If send packets in 40 Mhz in 20/40 */
- if(priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
+ } else {
+ if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
+ if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
- }else{ /* in force send packets in 20 Mhz in 20/40 */
- if(priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
+ } else { /* in force send packets in 20 Mhz in 20/40 */
+ if (priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
}
@@ -553,14 +513,14 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
bool bHighpowerstate, viviflag = FALSE;
DCMD_TXCMD_T tx_cmd;
u8 powerlevelOFDM24G;
- int i =0, j = 0, k = 0;
- u8 RF_Type, tmp_report[5]={0, 0, 0, 0, 0};
+ int i = 0, j = 0, k = 0;
+ u8 RF_Type, tmp_report[5] = {0, 0, 0, 0, 0};
u32 Value;
u8 Pwr_Flag;
- u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0;
+ u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver = 0;
/*RT_STATUS rtStatus = RT_STATUS_SUCCESS;*/
bool rtStatus = true;
- u32 delta=0;
+ u32 delta = 0;
write_nic_byte(dev, 0x1ba, 0);
@@ -573,163 +533,137 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
RT_TRACE(COMP_POWER_TRACKING, "powerlevelOFDM24G = %x\n", powerlevelOFDM24G);
- for(j = 0; j<=30; j++)
-{ /* fill tx_cmd */
- tx_cmd.Op = TXCMD_SET_TX_PWR_TRACKING;
- tx_cmd.Length = 4;
- tx_cmd.Value = Value;
- rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
- if (rtStatus == RT_STATUS_FAILURE)
- {
- RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
- }
- mdelay(1);
- /*DbgPrint("hi, vivi, strange\n");*/
- for(i = 0;i <= 30; i++)
- {
- read_nic_byte(dev, 0x1ba, &Pwr_Flag);
-
- if (Pwr_Flag == 0)
- {
- mdelay(1);
- continue;
- }
- read_nic_word(dev, 0x13c, &Avg_TSSI_Meas);
- if(Avg_TSSI_Meas == 0)
- {
- write_nic_byte(dev, 0x1ba, 0);
- break;
- }
-
- for(k = 0;k < 5; k++)
- {
- if(k !=4)
- read_nic_byte(dev, 0x134+k, &tmp_report[k]);
- else
- read_nic_byte(dev, 0x13e, &tmp_report[k]);
- RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]);
- }
-
- /* check if the report value is right */
- for(k = 0;k < 5; k++)
- {
- if(tmp_report[k] <= 20)
- {
- viviflag =TRUE;
+ for (j = 0; j <= 30; j++) { /* fill tx_cmd */
+ tx_cmd.Op = TXCMD_SET_TX_PWR_TRACKING;
+ tx_cmd.Length = 4;
+ tx_cmd.Value = Value;
+ rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
+ if (rtStatus == RT_STATUS_FAILURE) {
+ RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
+ }
+ mdelay(1);
+ /*DbgPrint("hi, vivi, strange\n");*/
+ for (i = 0; i <= 30; i++) {
+ read_nic_byte(dev, 0x1ba, &Pwr_Flag);
+
+ if (Pwr_Flag == 0) {
+ mdelay(1);
+ continue;
+ }
+ read_nic_word(dev, 0x13c, &Avg_TSSI_Meas);
+ if (Avg_TSSI_Meas == 0) {
+ write_nic_byte(dev, 0x1ba, 0);
break;
}
- }
- if(viviflag ==TRUE)
- {
- write_nic_byte(dev, 0x1ba, 0);
- viviflag = FALSE;
- RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
- for(k = 0;k < 5; k++)
- tmp_report[k] = 0;
- break;
- }
-
- for(k = 0;k < 5; k++)
- {
- Avg_TSSI_Meas_from_driver += tmp_report[k];
- }
- Avg_TSSI_Meas_from_driver = Avg_TSSI_Meas_from_driver*100/5;
- RT_TRACE(COMP_POWER_TRACKING, "Avg_TSSI_Meas_from_driver = %d\n", Avg_TSSI_Meas_from_driver);
- TSSI_13dBm = priv->TSSI_13dBm;
- RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm);
-
- /*if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)*/
- /* For MacOS-compatible */
- if(Avg_TSSI_Meas_from_driver > TSSI_13dBm)
- delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
- else
- delta = TSSI_13dBm - Avg_TSSI_Meas_from_driver;
+ for (k = 0; k < 5; k++) {
+ if (k != 4)
+ read_nic_byte(dev, 0x134+k, &tmp_report[k]);
+ else
+ read_nic_byte(dev, 0x13e, &tmp_report[k]);
+ RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]);
+ }
- if(delta <= E_FOR_TX_POWER_TRACK)
- {
- priv->ieee80211->bdynamic_txpower_enable = TRUE;
- write_nic_byte(dev, 0x1ba, 0);
- RT_TRACE(COMP_POWER_TRACKING, "tx power track is done\n");
- RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
- RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
- RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
- RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
- return;
- }
- else
- {
- if(Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK)
- {
- if (priv->rfa_txpowertrackingindex > 0)
- {
- priv->rfa_txpowertrackingindex--;
- if(priv->rfa_txpowertrackingindex_real > 4)
- {
- priv->rfa_txpowertrackingindex_real--;
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
- }
+ /* check if the report value is right */
+ for (k = 0; k < 5; k++) {
+ if (tmp_report[k] <= 20) {
+ viviflag = TRUE;
+ break;
}
}
- else
- {
- if (priv->rfa_txpowertrackingindex < 36)
- {
- priv->rfa_txpowertrackingindex++;
- priv->rfa_txpowertrackingindex_real++;
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+ if (viviflag == TRUE) {
+ write_nic_byte(dev, 0x1ba, 0);
+ viviflag = FALSE;
+ RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
+ for (k = 0; k < 5; k++)
+ tmp_report[k] = 0;
+ break;
+ }
- }
+ for (k = 0; k < 5; k++) {
+ Avg_TSSI_Meas_from_driver += tmp_report[k];
}
- priv->cck_present_attentuation_difference
- = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
- if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
- priv->cck_present_attentuation
- = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
+ Avg_TSSI_Meas_from_driver = Avg_TSSI_Meas_from_driver*100/5;
+ RT_TRACE(COMP_POWER_TRACKING, "Avg_TSSI_Meas_from_driver = %d\n", Avg_TSSI_Meas_from_driver);
+ TSSI_13dBm = priv->TSSI_13dBm;
+ RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm);
+
+ /*if (abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)*/
+ /* For MacOS-compatible */
+ if (Avg_TSSI_Meas_from_driver > TSSI_13dBm)
+ delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
else
- priv->cck_present_attentuation
- = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
+ delta = TSSI_13dBm - Avg_TSSI_Meas_from_driver;
+
+ if (delta <= E_FOR_TX_POWER_TRACK) {
+ priv->ieee80211->bdynamic_txpower_enable = TRUE;
+ write_nic_byte(dev, 0x1ba, 0);
+ RT_TRACE(COMP_POWER_TRACKING, "tx power track is done\n");
+ RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
+ return;
+ } else {
+ if (Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK) {
+ if (priv->rfa_txpowertrackingindex > 0) {
+ priv->rfa_txpowertrackingindex--;
+ if (priv->rfa_txpowertrackingindex_real > 4) {
+ priv->rfa_txpowertrackingindex_real--;
+ rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+ }
+ }
+ } else {
+ if (priv->rfa_txpowertrackingindex < 36) {
+ priv->rfa_txpowertrackingindex++;
+ priv->rfa_txpowertrackingindex_real++;
+ rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
- if(priv->cck_present_attentuation > -1&&priv->cck_present_attentuation <23)
- {
- if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14)
- {
- priv->bcck_in_ch14 = TRUE;
- dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
- }
- else if(priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14)
- {
- priv->bcck_in_ch14 = FALSE;
- dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+ }
}
+ priv->cck_present_attentuation_difference
+ = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
+
+ if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+ priv->cck_present_attentuation
+ = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
else
- dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
+ priv->cck_present_attentuation
+ = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
+
+ if (priv->cck_present_attentuation > -1 && priv->cck_present_attentuation < 23) {
+ if (priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) {
+ priv->bcck_in_ch14 = TRUE;
+ dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+ } else if (priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) {
+ priv->bcck_in_ch14 = FALSE;
+ dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+ } else
+ dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+ }
+ RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
+
+ if (priv->cck_present_attentuation_difference <= -12 || priv->cck_present_attentuation_difference >= 24) {
+ priv->ieee80211->bdynamic_txpower_enable = TRUE;
+ write_nic_byte(dev, 0x1ba, 0);
+ RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
+ return;
+ }
+
}
- RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
- RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
- RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
- RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
-
- if (priv->cck_present_attentuation_difference <= -12||priv->cck_present_attentuation_difference >= 24)
- {
- priv->ieee80211->bdynamic_txpower_enable = TRUE;
write_nic_byte(dev, 0x1ba, 0);
- RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
- return;
+ Avg_TSSI_Meas_from_driver = 0;
+ for (k = 0; k < 5; k++)
+ tmp_report[k] = 0;
+ break;
}
-
-
- }
- write_nic_byte(dev, 0x1ba, 0);
- Avg_TSSI_Meas_from_driver = 0;
- for(k = 0;k < 5; k++)
- tmp_report[k] = 0;
- break;
}
-}
- priv->ieee80211->bdynamic_txpower_enable = TRUE;
- write_nic_byte(dev, 0x1ba, 0);
+ priv->ieee80211->bdynamic_txpower_enable = TRUE;
+ write_nic_byte(dev, 0x1ba, 0);
}
static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
@@ -738,17 +672,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u32 tmpRegA, TempCCk;
u8 tmpOFDMindex, tmpCCKindex, tmpCCK20Mindex, tmpCCK40Mindex, tmpval;
- int i =0, CCKSwingNeedUpdate=0;
+ int i = 0, CCKSwingNeedUpdate = 0;
- if(!priv->btxpower_trackingInit)
- {
+ if (!priv->btxpower_trackingInit) {
/* Query OFDM default setting */
- tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
- for(i=0; i<OFDM_Table_Length; i++) /* find the index */
- {
- if(tmpRegA == OFDMSwingTable[i])
- {
- priv->OFDM_index= (u8)i;
+ tmpRegA = rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
+ for (i = 0; i < OFDM_Table_Length; i++) { /* find the index */
+ if (tmpRegA == OFDMSwingTable[i]) {
+ priv->OFDM_index = (u8)i;
RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, OFDM_index=0x%x\n",
rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index);
}
@@ -756,11 +687,9 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
/* Query CCK default setting From 0xa22 */
TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
- for(i=0 ; i<CCK_Table_length ; i++)
- {
- if(TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0])
- {
- priv->CCK_index =(u8) i;
+ for (i = 0; i < CCK_Table_length; i++) {
+ if (TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0]) {
+ priv->CCK_index = (u8) i;
RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, CCK_index=0x%x\n",
rCCK0_TxFilter1, TempCCk, priv->CCK_index);
break;
@@ -779,32 +708,30 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
/* read and filter out unreasonable value */
tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); /* 0x12: RF Reg[10:7] */
- RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
- if(tmpRegA < 3 || tmpRegA > 13)
+ RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d\n", tmpRegA);
+ if (tmpRegA < 3 || tmpRegA > 13)
return;
- if(tmpRegA >= 12) /* if over 12, TP will be bad when high temperature */
+ if (tmpRegA >= 12) /* if over 12, TP will be bad when high temperature */
tmpRegA = 12;
- RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
+ RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d\n", tmpRegA);
priv->ThermalMeter[0] = ThermalMeterVal; /* We use fixed value by Bryant's suggestion */
priv->ThermalMeter[1] = ThermalMeterVal; /* We use fixed value by Bryant's suggestion */
/* Get current RF-A temperature index */
- if(priv->ThermalMeter[0] >= (u8)tmpRegA) /* lower temperature */
- {
+ if (priv->ThermalMeter[0] >= (u8)tmpRegA) { /* lower temperature */
tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
tmpCCK40Mindex = tmpCCK20Mindex - 6;
- if(tmpOFDMindex >= OFDM_Table_Length)
+ if (tmpOFDMindex >= OFDM_Table_Length)
tmpOFDMindex = OFDM_Table_Length-1;
- if(tmpCCK20Mindex >= CCK_Table_length)
+ if (tmpCCK20Mindex >= CCK_Table_length)
tmpCCK20Mindex = CCK_Table_length-1;
- if(tmpCCK40Mindex >= CCK_Table_length)
+ if (tmpCCK40Mindex >= CCK_Table_length)
tmpCCK40Mindex = CCK_Table_length-1;
- }
- else
- {
+ } else {
tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
- if(tmpval >= 6) /* higher temperature */
- tmpOFDMindex = tmpCCK20Mindex = 0; /* max to +6dB */
+
+ if (tmpval >= 6) /* higher temperature */
+ tmpOFDMindex = tmpCCK20Mindex = 0; /* max to +6dB */
else
tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
tmpCCK40Mindex = 0;
@@ -812,35 +739,29 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
/*DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);*/
- if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) /* 40M */
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) /* 40M */
tmpCCKindex = tmpCCK40Mindex;
else
tmpCCKindex = tmpCCK20Mindex;
- if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14)
- {
+ if (priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) {
priv->bcck_in_ch14 = TRUE;
CCKSwingNeedUpdate = 1;
- }
- else if(priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14)
- {
+ } else if (priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) {
priv->bcck_in_ch14 = FALSE;
CCKSwingNeedUpdate = 1;
}
- if(priv->CCK_index != tmpCCKindex)
- {
+ if (priv->CCK_index != tmpCCKindex) {
priv->CCK_index = tmpCCKindex;
CCKSwingNeedUpdate = 1;
}
- if(CCKSwingNeedUpdate)
- {
+ if (CCKSwingNeedUpdate) {
/*DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);*/
dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
}
- if(priv->OFDM_index != tmpOFDMindex)
- {
+ if (priv->OFDM_index != tmpOFDMindex) {
priv->OFDM_index = tmpOFDMindex;
rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n",
@@ -851,97 +772,95 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
void dm_txpower_trackingcallback(struct work_struct *work)
{
- struct delayed_work *dwork = container_of(work,struct delayed_work,work);
- struct r8192_priv *priv = container_of(dwork,struct r8192_priv,txpower_tracking_wq);
- struct net_device *dev = priv->ieee80211->dev;
+ struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+ struct r8192_priv *priv = container_of(dwork, struct r8192_priv, txpower_tracking_wq);
+ struct net_device *dev = priv->ieee80211->dev;
- if(priv->bDcut == TRUE)
+ if (priv->bDcut == TRUE)
dm_TXPowerTrackingCallback_TSSI(dev);
else
dm_TXPowerTrackingCallback_ThermalMeter(dev);
}
-
static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
{
-
struct r8192_priv *priv = ieee80211_priv(dev);
/* Initial the Tx BB index and mapping value */
priv->txbbgain_table[0].txbb_iq_amplifygain = 12;
- priv->txbbgain_table[0].txbbgain_value=0x7f8001fe;
+ priv->txbbgain_table[0].txbbgain_value = 0x7f8001fe;
priv->txbbgain_table[1].txbb_iq_amplifygain = 11;
- priv->txbbgain_table[1].txbbgain_value=0x788001e2;
+ priv->txbbgain_table[1].txbbgain_value = 0x788001e2;
priv->txbbgain_table[2].txbb_iq_amplifygain = 10;
- priv->txbbgain_table[2].txbbgain_value=0x71c001c7;
+ priv->txbbgain_table[2].txbbgain_value = 0x71c001c7;
priv->txbbgain_table[3].txbb_iq_amplifygain = 9;
- priv->txbbgain_table[3].txbbgain_value=0x6b8001ae;
+ priv->txbbgain_table[3].txbbgain_value = 0x6b8001ae;
priv->txbbgain_table[4].txbb_iq_amplifygain = 8;
- priv->txbbgain_table[4].txbbgain_value=0x65400195;
+ priv->txbbgain_table[4].txbbgain_value = 0x65400195;
priv->txbbgain_table[5].txbb_iq_amplifygain = 7;
- priv->txbbgain_table[5].txbbgain_value=0x5fc0017f;
+ priv->txbbgain_table[5].txbbgain_value = 0x5fc0017f;
priv->txbbgain_table[6].txbb_iq_amplifygain = 6;
- priv->txbbgain_table[6].txbbgain_value=0x5a400169;
+ priv->txbbgain_table[6].txbbgain_value = 0x5a400169;
priv->txbbgain_table[7].txbb_iq_amplifygain = 5;
- priv->txbbgain_table[7].txbbgain_value=0x55400155;
+ priv->txbbgain_table[7].txbbgain_value = 0x55400155;
priv->txbbgain_table[8].txbb_iq_amplifygain = 4;
- priv->txbbgain_table[8].txbbgain_value=0x50800142;
+ priv->txbbgain_table[8].txbbgain_value = 0x50800142;
priv->txbbgain_table[9].txbb_iq_amplifygain = 3;
- priv->txbbgain_table[9].txbbgain_value=0x4c000130;
+ priv->txbbgain_table[9].txbbgain_value = 0x4c000130;
priv->txbbgain_table[10].txbb_iq_amplifygain = 2;
- priv->txbbgain_table[10].txbbgain_value=0x47c0011f;
+ priv->txbbgain_table[10].txbbgain_value = 0x47c0011f;
priv->txbbgain_table[11].txbb_iq_amplifygain = 1;
- priv->txbbgain_table[11].txbbgain_value=0x43c0010f;
+ priv->txbbgain_table[11].txbbgain_value = 0x43c0010f;
priv->txbbgain_table[12].txbb_iq_amplifygain = 0;
- priv->txbbgain_table[12].txbbgain_value=0x40000100;
+ priv->txbbgain_table[12].txbbgain_value = 0x40000100;
priv->txbbgain_table[13].txbb_iq_amplifygain = -1;
- priv->txbbgain_table[13].txbbgain_value=0x3c8000f2;
+ priv->txbbgain_table[13].txbbgain_value = 0x3c8000f2;
priv->txbbgain_table[14].txbb_iq_amplifygain = -2;
- priv->txbbgain_table[14].txbbgain_value=0x390000e4;
+ priv->txbbgain_table[14].txbbgain_value = 0x390000e4;
priv->txbbgain_table[15].txbb_iq_amplifygain = -3;
- priv->txbbgain_table[15].txbbgain_value=0x35c000d7;
+ priv->txbbgain_table[15].txbbgain_value = 0x35c000d7;
priv->txbbgain_table[16].txbb_iq_amplifygain = -4;
- priv->txbbgain_table[16].txbbgain_value=0x32c000cb;
+ priv->txbbgain_table[16].txbbgain_value = 0x32c000cb;
priv->txbbgain_table[17].txbb_iq_amplifygain = -5;
- priv->txbbgain_table[17].txbbgain_value=0x300000c0;
+ priv->txbbgain_table[17].txbbgain_value = 0x300000c0;
priv->txbbgain_table[18].txbb_iq_amplifygain = -6;
- priv->txbbgain_table[18].txbbgain_value=0x2d4000b5;
+ priv->txbbgain_table[18].txbbgain_value = 0x2d4000b5;
priv->txbbgain_table[19].txbb_iq_amplifygain = -7;
- priv->txbbgain_table[19].txbbgain_value=0x2ac000ab;
+ priv->txbbgain_table[19].txbbgain_value = 0x2ac000ab;
priv->txbbgain_table[20].txbb_iq_amplifygain = -8;
- priv->txbbgain_table[20].txbbgain_value=0x288000a2;
+ priv->txbbgain_table[20].txbbgain_value = 0x288000a2;
priv->txbbgain_table[21].txbb_iq_amplifygain = -9;
- priv->txbbgain_table[21].txbbgain_value=0x26000098;
+ priv->txbbgain_table[21].txbbgain_value = 0x26000098;
priv->txbbgain_table[22].txbb_iq_amplifygain = -10;
- priv->txbbgain_table[22].txbbgain_value=0x24000090;
+ priv->txbbgain_table[22].txbbgain_value = 0x24000090;
priv->txbbgain_table[23].txbb_iq_amplifygain = -11;
- priv->txbbgain_table[23].txbbgain_value=0x22000088;
+ priv->txbbgain_table[23].txbbgain_value = 0x22000088;
priv->txbbgain_table[24].txbb_iq_amplifygain = -12;
- priv->txbbgain_table[24].txbbgain_value=0x20000080;
+ priv->txbbgain_table[24].txbbgain_value = 0x20000080;
priv->txbbgain_table[25].txbb_iq_amplifygain = -13;
- priv->txbbgain_table[25].txbbgain_value=0x1a00006c;
+ priv->txbbgain_table[25].txbbgain_value = 0x1a00006c;
priv->txbbgain_table[26].txbb_iq_amplifygain = -14;
- priv->txbbgain_table[26].txbbgain_value=0x1c800072;
+ priv->txbbgain_table[26].txbbgain_value = 0x1c800072;
priv->txbbgain_table[27].txbb_iq_amplifygain = -15;
- priv->txbbgain_table[27].txbbgain_value=0x18000060;
+ priv->txbbgain_table[27].txbbgain_value = 0x18000060;
priv->txbbgain_table[28].txbb_iq_amplifygain = -16;
- priv->txbbgain_table[28].txbbgain_value=0x19800066;
+ priv->txbbgain_table[28].txbbgain_value = 0x19800066;
priv->txbbgain_table[29].txbb_iq_amplifygain = -17;
- priv->txbbgain_table[29].txbbgain_value=0x15800056;
+ priv->txbbgain_table[29].txbbgain_value = 0x15800056;
priv->txbbgain_table[30].txbb_iq_amplifygain = -18;
- priv->txbbgain_table[30].txbbgain_value=0x26c0005b;
+ priv->txbbgain_table[30].txbbgain_value = 0x26c0005b;
priv->txbbgain_table[31].txbb_iq_amplifygain = -19;
- priv->txbbgain_table[31].txbbgain_value=0x14400051;
+ priv->txbbgain_table[31].txbbgain_value = 0x14400051;
priv->txbbgain_table[32].txbb_iq_amplifygain = -20;
- priv->txbbgain_table[32].txbbgain_value=0x24400051;
+ priv->txbbgain_table[32].txbbgain_value = 0x24400051;
priv->txbbgain_table[33].txbb_iq_amplifygain = -21;
- priv->txbbgain_table[33].txbbgain_value=0x1300004c;
+ priv->txbbgain_table[33].txbbgain_value = 0x1300004c;
priv->txbbgain_table[34].txbb_iq_amplifygain = -22;
- priv->txbbgain_table[34].txbbgain_value=0x12000048;
+ priv->txbbgain_table[34].txbbgain_value = 0x12000048;
priv->txbbgain_table[35].txbb_iq_amplifygain = -23;
- priv->txbbgain_table[35].txbbgain_value=0x11000044;
+ priv->txbbgain_table[35].txbbgain_value = 0x11000044;
priv->txbbgain_table[36].txbb_iq_amplifygain = -24;
- priv->txbbgain_table[36].txbbgain_value=0x10000040;
+ priv->txbbgain_table[36].txbbgain_value = 0x10000040;
/*
* ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
@@ -1380,7 +1299,7 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
* can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
* 3-wire by driver causes RF to go into a wrong state.
*/
- if(priv->ieee80211->FwRWRF)
+ if (priv->ieee80211->FwRWRF)
priv->btxpower_tracking = TRUE;
else
priv->btxpower_tracking = FALSE;
@@ -1388,54 +1307,46 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
priv->btxpower_trackingInit = FALSE;
}
-
void dm_initialize_txpower_tracking(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- if(priv->bDcut == TRUE)
+
+ if (priv->bDcut == TRUE)
dm_InitializeTXPowerTracking_TSSI(dev);
else
dm_InitializeTXPowerTracking_ThermalMeter(dev);
} /* dm_InitializeTXPowerTracking */
-
static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
static u32 tx_power_track_counter;
- if(!priv->btxpower_tracking)
+ if (!priv->btxpower_tracking)
return;
- else
- {
- if((tx_power_track_counter % 30 == 0)&&(tx_power_track_counter != 0))
- {
- queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
+ else {
+ if ((tx_power_track_counter % 30 == 0) && (tx_power_track_counter != 0)) {
+ queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
}
tx_power_track_counter++;
}
-
}
-
static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
static u8 TM_Trigger;
- /*DbgPrint("dm_CheckTXPowerTracking() \n");*/
- if(!priv->btxpower_tracking)
+ /*DbgPrint("dm_CheckTXPowerTracking()\n");*/
+ if (!priv->btxpower_tracking)
return;
- else
- {
- if(priv->txpower_count <= 2)
- {
+ else {
+ if (priv->txpower_count <= 2) {
priv->txpower_count++;
return;
}
}
- if(!TM_Trigger)
- {
+ if (!TM_Trigger) {
/*
* Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash
* actually write reg0x02 bit1=0, then bit1=1.
@@ -1447,25 +1358,22 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
TM_Trigger = 1;
return;
- }
- else
- {
+ } else {
/*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
- queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
+ queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
TM_Trigger = 0;
}
}
-
static void dm_check_txpower_tracking(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
/*static u32 tx_power_track_counter = 0;*/
-#ifdef RTL8190P
+#ifdef RTL8190P
dm_CheckTXPowerTracking_TSSI(dev);
#else
- if(priv->bDcut == TRUE)
+ if (priv->bDcut == TRUE)
dm_CheckTXPowerTracking_TSSI(dev);
else
dm_CheckTXPowerTracking_ThermalMeter(dev);
@@ -1473,17 +1381,17 @@ static void dm_check_txpower_tracking(struct net_device *dev)
} /* dm_CheckTXPowerTracking */
-
static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14)
{
u32 TempVal;
struct r8192_priv *priv = ieee80211_priv(dev);
+
/* Write 0xa22 0xa23 */
TempVal = 0;
- if(!bInCH14){
+ if (!bInCH14) {
/* Write 0xa22 0xa23 */
TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
- (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
+ (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8);
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
/* Write 0xa24 ~ 0xa27 */
@@ -1494,14 +1402,12 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14)
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
/* Write 0xa28 0xa29 */
TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
- (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
+ (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8);
rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
- }
- else
- {
+ } else {
TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
- (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
+ (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8);
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
/* Write 0xa24 ~ 0xa27 */
@@ -1512,25 +1418,22 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14)
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
/* Write 0xa28 0xa29 */
TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
- (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
+ (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8);
rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
}
-
-
}
-static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH14)
+static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH14)
{
u32 TempVal;
struct r8192_priv *priv = ieee80211_priv(dev);
TempVal = 0;
- if(!bInCH14)
- {
+ if (!bInCH14) {
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
- (CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
+ (CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8);
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter1, TempVal);
@@ -1544,18 +1447,16 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
rCCK0_TxFilter2, TempVal);
/* Write 0xa28 0xa29 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
- (CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
+ (CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8);
rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_DebugPort, TempVal);
- }
- else
- {
+ } else {
/*priv->CCKTxPowerAdjustCntNotCh14++; cosa add for debug.*/
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
- (CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
+ (CCKSwingTable_Ch14[priv->CCK_index][1]<<8);
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
@@ -1570,7 +1471,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
rCCK0_TxFilter2, TempVal);
/* Write 0xa28 0xa29 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] +
- (CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
+ (CCKSwingTable_Ch14[priv->CCK_index][7]<<8);
rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
@@ -1578,20 +1479,17 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
}
}
-
-
void dm_cck_txpower_adjust(struct net_device *dev, bool binch14)
{ /* dm_CCKTxPowerAdjust */
-
struct r8192_priv *priv = ieee80211_priv(dev);
- if(priv->bDcut == TRUE)
+
+ if (priv->bDcut == TRUE)
dm_CCKTxPowerAdjust_TSSI(dev, binch14);
else
dm_CCKTxPowerAdjust_ThermalMeter(dev, binch14);
}
-
-#ifndef RTL8192U
+#ifndef RTL8192U
static void dm_txpower_reset_recovery(
struct net_device *dev
)
@@ -1600,16 +1498,16 @@ static void dm_txpower_reset_recovery(
RT_TRACE(COMP_POWER_TRACKING, "Start Reset Recovery ==>\n");
rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc80 is %08x\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFA_txPowerTrackingIndex is %x\n",priv->rfa_txpowertrackingindex);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF A I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbb_iq_amplifygain);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: CCK Attenuation is %d dB\n",priv->cck_present_attentuation);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc80 is %08x\n", priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFA_txPowerTrackingIndex is %x\n", priv->rfa_txpowertrackingindex);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF A I/Q Amplify Gain is %ld\n", priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbb_iq_amplifygain);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: CCK Attenuation is %d dB\n", priv->cck_present_attentuation);
dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc90 is %08x\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFC_txPowerTrackingIndex is %x\n",priv->rfc_txpowertrackingindex);
- RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc90 is %08x\n", priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFC_txPowerTrackingIndex is %x\n", priv->rfc_txpowertrackingindex);
+ RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain is %ld\n", priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain);
} /* dm_TXPowerResetRecovery */
@@ -1618,25 +1516,25 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u32 reg_ratr = priv->rate_adaptive.last_ratr;
- if(!priv->up)
- {
+ if (!priv->up) {
RT_TRACE(COMP_RATE, "<---- dm_restore_dynamic_mechanism_state(): driver is going to unload\n");
return;
}
/* Restore previous state for rate adaptive */
- if(priv->rate_adaptive.rate_adaptive_disabled)
+ if (priv->rate_adaptive.rate_adaptive_disabled)
return;
/* TODO: Only 11n mode is implemented currently, */
- if(!(priv->ieee80211->mode==WIRELESS_MODE_N_24G ||
- priv->ieee80211->mode==WIRELESS_MODE_N_5G))
- return;
+ if (!(priv->ieee80211->mode == WIRELESS_MODE_N_24G ||
+ priv->ieee80211->mode == WIRELESS_MODE_N_5G))
+ return;
+
{
/* 2007/11/15 MH Copy from 8190PCI. */
u32 ratr_value;
+
ratr_value = reg_ratr;
- if(priv->rf_type == RF_1T2R) /* 1T2R, Spatial Stream 2 should be disabled */
- {
+ if (priv->rf_type == RF_1T2R) { /* 1T2R, Spatial Stream 2 should be disabled */
ratr_value &= ~(RATE_ALL_OFDM_2SS);
/*DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);*/
}
@@ -1659,7 +1557,7 @@ static void dm_bb_initialgain_restore(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u32 bit_mask = 0x7f; /* Bit0~ Bit6 */
- if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
+ if (dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
return;
/* Disable Initial Gain */
@@ -1672,18 +1570,17 @@ static void dm_bb_initialgain_restore(struct net_device *dev)
bit_mask = bMaskByte2;
rtl8192_setBBreg(dev, rCCK0_CCA, bit_mask, (u32)priv->initgain_backup.cca);
- RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
- RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
- RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
- RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
- RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
+ RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc50 is %x\n", priv->initgain_backup.xaagccore1);
+ RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc58 is %x\n", priv->initgain_backup.xbagccore1);
+ RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is %x\n", priv->initgain_backup.xcagccore1);
+ RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n", priv->initgain_backup.xdagccore1);
+ RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n", priv->initgain_backup.cca);
/* Enable Initial Gain */
/*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);*/
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite. */
} /* dm_BBInitialGainRestore */
-
void dm_backup_dynamic_mechanism_state(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1696,13 +1593,12 @@ void dm_backup_dynamic_mechanism_state(struct net_device *dev)
} /* DM_BackupDynamicMechanismState */
-
static void dm_bb_initialgain_backup(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 bit_mask = bMaskByte0; /* Bit0~ Bit6 */
- if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
+ if (dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
return;
/*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
@@ -1714,11 +1610,11 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
bit_mask = bMaskByte2;
priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bit_mask);
- RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
- RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
- RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
- RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
- RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
+ RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc50 is %x\n", priv->initgain_backup.xaagccore1);
+ RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc58 is %x\n", priv->initgain_backup.xbagccore1);
+ RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc60 is %x\n", priv->initgain_backup.xcagccore1);
+ RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is %x\n", priv->initgain_backup.xdagccore1);
+ RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is %x\n", priv->initgain_backup.cca);
} /* dm_BBInitialGainBakcup */
@@ -1743,67 +1639,44 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type,
u32 dm_value)
{
- if (dm_type == DIG_TYPE_THRESH_HIGH)
- {
+ if (dm_type == DIG_TYPE_THRESH_HIGH) {
dm_digtable.rssi_high_thresh = dm_value;
- }
- else if (dm_type == DIG_TYPE_THRESH_LOW)
- {
+ } else if (dm_type == DIG_TYPE_THRESH_LOW) {
dm_digtable.rssi_low_thresh = dm_value;
- }
- else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
- {
+ } else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH) {
dm_digtable.rssi_high_power_highthresh = dm_value;
- }
- else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
- {
+ } else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH) {
dm_digtable.rssi_high_power_highthresh = dm_value;
- }
- else if (dm_type == DIG_TYPE_ENABLE)
- {
+ } else if (dm_type == DIG_TYPE_ENABLE) {
dm_digtable.dig_state = DM_STA_DIG_MAX;
dm_digtable.dig_enable_flag = true;
- }
- else if (dm_type == DIG_TYPE_DISABLE)
- {
+ } else if (dm_type == DIG_TYPE_DISABLE) {
dm_digtable.dig_state = DM_STA_DIG_MAX;
dm_digtable.dig_enable_flag = false;
- }
- else if (dm_type == DIG_TYPE_DBG_MODE)
- {
- if(dm_value >= DM_DBG_MAX)
+ } else if (dm_type == DIG_TYPE_DBG_MODE) {
+ if (dm_value >= DM_DBG_MAX)
dm_value = DM_DBG_OFF;
dm_digtable.dbg_mode = (u8)dm_value;
- }
- else if (dm_type == DIG_TYPE_RSSI)
- {
- if(dm_value > 100)
+ } else if (dm_type == DIG_TYPE_RSSI) {
+ if (dm_value > 100)
dm_value = 30;
dm_digtable.rssi_val = (long)dm_value;
- }
- else if (dm_type == DIG_TYPE_ALGORITHM)
- {
+ } else if (dm_type == DIG_TYPE_ALGORITHM) {
if (dm_value >= DIG_ALGO_MAX)
dm_value = DIG_ALGO_BY_FALSE_ALARM;
- if(dm_digtable.dig_algorithm != (u8)dm_value)
+ if (dm_digtable.dig_algorithm != (u8)dm_value)
dm_digtable.dig_algorithm_switch = 1;
dm_digtable.dig_algorithm = (u8)dm_value;
- }
- else if (dm_type == DIG_TYPE_BACKOFF)
- {
- if(dm_value > 30)
+ } else if (dm_type == DIG_TYPE_BACKOFF) {
+ if (dm_value > 30)
dm_value = 30;
dm_digtable.backoff_val = (u8)dm_value;
- }
- else if(dm_type == DIG_TYPE_RX_GAIN_MIN)
- {
- if(dm_value == 0)
+ } else if (dm_type == DIG_TYPE_RX_GAIN_MIN) {
+ if (dm_value == 0)
dm_value = 0x1;
dm_digtable.rx_gain_range_min = (u8)dm_value;
- }
- else if(dm_type == DIG_TYPE_RX_GAIN_MAX)
- {
- if(dm_value > 0x50)
+ } else if (dm_type == DIG_TYPE_RX_GAIN_MAX) {
+ if (dm_value > 0x50)
dm_value = 0x50;
dm_digtable.rx_gain_range_max = (u8)dm_value;
}
@@ -1848,14 +1721,13 @@ static void dm_dig_init(struct net_device *dev)
dm_digtable.rssi_val = 50; /* for new dig debug rssi value */
dm_digtable.backoff_val = DM_DIG_BACKOFF;
dm_digtable.rx_gain_range_max = DM_DIG_MAX;
- if(priv->CustomerID == RT_CID_819x_Netcore)
+ if (priv->CustomerID == RT_CID_819x_Netcore)
dm_digtable.rx_gain_range_min = DM_DIG_MIN_Netcore;
else
dm_digtable.rx_gain_range_min = DM_DIG_MIN;
} /* dm_dig_init */
-
/*-----------------------------------------------------------------------------
* Function: dm_ctrl_initgain_byrssi()
*
@@ -1875,20 +1747,18 @@ static void dm_dig_init(struct net_device *dev)
*---------------------------------------------------------------------------*/
static void dm_ctrl_initgain_byrssi(struct net_device *dev)
{
-
if (dm_digtable.dig_enable_flag == false)
return;
- if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
+ if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev);
- else if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
+ else if (dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
dm_ctrl_initgain_byrssi_by_driverrssi(dev);
/* ; */
else
return;
}
-
static void dm_ctrl_initgain_byrssi_by_driverrssi(
struct net_device *dev)
{
@@ -1899,33 +1769,33 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
if (dm_digtable.dig_enable_flag == false)
return;
- /*DbgPrint("Dig by Sw Rssi \n");*/
- if(dm_digtable.dig_algorithm_switch) /* if switched algorithm, we have to disable FW Dig. */
+ /*DbgPrint("Dig by Sw Rssi\n");*/
+ if (dm_digtable.dig_algorithm_switch) /* if switched algorithm, we have to disable FW Dig. */
fw_dig = 0;
- if(fw_dig <= 3)
- { /* execute several times to make sure the FW Dig is disabled */
+
+ if (fw_dig <= 3) { /* execute several times to make sure the FW Dig is disabled */
/* FW DIG Off */
- for(i=0; i<3; i++)
+ for (i = 0; i < 3; i++)
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
fw_dig++;
dm_digtable.dig_state = DM_STA_DIG_OFF; /* fw dig off. */
}
- if(priv->ieee80211->state == IEEE80211_LINKED)
+ if (priv->ieee80211->state == IEEE80211_LINKED)
dm_digtable.cur_connect_state = DIG_CONNECT;
else
dm_digtable.cur_connect_state = DIG_DISCONNECT;
- /*DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d \n",
+ /*DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d\n",
DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);*/
- if(dm_digtable.dbg_mode == DM_DBG_OFF)
+ if (dm_digtable.dbg_mode == DM_DBG_OFF)
dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
- /*DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);*/
+ /*DbgPrint("DM_DigTable.Rssi_val = %d\n", DM_DigTable.Rssi_val);*/
dm_initial_gain(dev);
dm_pd_th(dev);
dm_cs_ratio(dev);
- if(dm_digtable.dig_algorithm_switch)
+ if (dm_digtable.dig_algorithm_switch)
dm_digtable.dig_algorithm_switch = 0;
dm_digtable.pre_connect_state = dm_digtable.cur_connect_state;
@@ -1941,11 +1811,10 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
if (dm_digtable.dig_enable_flag == false)
return;
- if(dm_digtable.dig_algorithm_switch)
- {
+ if (dm_digtable.dig_algorithm_switch) {
dm_digtable.dig_state = DM_STA_DIG_MAX;
/* Fw DIG On. */
- for(i=0; i<3; i++)
+ for (i = 0; i < 3; i++)
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite.*/
dm_digtable.dig_algorithm_switch = 0;
}
@@ -1956,9 +1825,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/* For smooth, we can not change DIG state. */
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_low_thresh) &&
(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh))
- {
return;
- }
+
/*DbgPrint("Dig by Fw False Alarm\n");*/
/*if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)*/
/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
@@ -1966,17 +1834,13 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
and then execute the step below. */
- if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
- {
+ if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh)) {
/* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
will be reset to init value. We must prevent the condition. */
if (dm_digtable.dig_state == DM_STA_DIG_OFF &&
- (priv->reset_count == reset_cnt))
- {
+ (priv->reset_count == reset_cnt)) {
return;
- }
- else
- {
+ } else {
reset_cnt = priv->reset_count;
}
@@ -1994,8 +1858,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x17);
/* 1.3 Lower PD_TH for OFDM. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
/*
* 2008/01/11 MH 40MHZ 90/92 register are not the same.
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
@@ -2007,8 +1870,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
else
PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
/* 1.4 Lower CS ratio for CCK. */
@@ -2022,18 +1884,14 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/* 2. When RSSI increase, We have to judge if it is larger than a threshold
and then execute the step below. */
- if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh))
- {
+ if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh)) {
u8 reset_flag = 0;
if (dm_digtable.dig_state == DM_STA_DIG_ON &&
- (priv->reset_count == reset_cnt))
- {
+ (priv->reset_count == reset_cnt)) {
dm_ctrl_initgain_byrssi_highpwr(dev);
return;
- }
- else
- {
+ } else {
if (priv->reset_count != reset_cnt)
reset_flag = 1;
@@ -2047,15 +1905,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
* 2.1 Set initial gain.
* 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
*/
- if (reset_flag == 1)
- {
+ if (reset_flag == 1) {
write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x2c);
write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x2c);
write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x2c);
write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x2c);
- }
- else
- {
+ } else {
write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x20);
write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x20);
write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x20);
@@ -2063,8 +1918,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
}
/* 2.2 Higher PD_TH for OFDM. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
/*
* 2008/01/11 MH 40MHZ 90/92 register are not the same.
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
@@ -2077,8 +1931,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
else
PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
/* 2.3 Higher CS ratio for CCK. */
@@ -2099,7 +1952,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
} /* dm_CtrlInitGainByRssi */
-
/*-----------------------------------------------------------------------------
* Function: dm_ctrl_initgain_byrssi_highpwr()
*
@@ -2125,9 +1977,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
/* For smooth, we can not change high power DIG state in the range. */
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) &&
(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
- {
return;
- }
/*
* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
@@ -2135,8 +1985,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
*
* 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
*/
- if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
- {
+ if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh) {
if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON &&
(priv->reset_count == reset_cnt_highpwr))
return;
@@ -2144,39 +1993,32 @@ static void dm_ctrl_initgain_byrssi_highpwr(
dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
/* 3.1 Higher PD_TH for OFDM for high power state. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
- }
- else
- {
- if (dm_digtable.dig_highpwr_state == DM_STA_DIG_OFF&&
+ } else {
+ if (dm_digtable.dig_highpwr_state == DM_STA_DIG_OFF &&
(priv->reset_count == reset_cnt_highpwr))
return;
else
dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
- priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh)
- {
+ priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
/* 3.2 Recover PD_TH for OFDM for normal power region. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
}
}
@@ -2185,51 +2027,42 @@ static void dm_ctrl_initgain_byrssi_highpwr(
} /* dm_CtrlInitGainByRssiHighPwr */
-
static void dm_initial_gain(
struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- u8 initial_gain=0;
+ u8 initial_gain = 0;
static u8 initialized, force_write;
static u32 reset_cnt;
u8 tmp;
- if(dm_digtable.dig_algorithm_switch)
- {
+ if (dm_digtable.dig_algorithm_switch) {
initialized = 0;
reset_cnt = 0;
}
- if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state)
- {
- if(dm_digtable.cur_connect_state == DIG_CONNECT)
- {
- if((dm_digtable.rssi_val+10-dm_digtable.backoff_val) > dm_digtable.rx_gain_range_max)
+ if (dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) {
+ if (dm_digtable.cur_connect_state == DIG_CONNECT) {
+ if ((dm_digtable.rssi_val+10-dm_digtable.backoff_val) > dm_digtable.rx_gain_range_max)
dm_digtable.cur_ig_value = dm_digtable.rx_gain_range_max;
- else if((dm_digtable.rssi_val+10-dm_digtable.backoff_val) < dm_digtable.rx_gain_range_min)
+ else if ((dm_digtable.rssi_val+10-dm_digtable.backoff_val) < dm_digtable.rx_gain_range_min)
dm_digtable.cur_ig_value = dm_digtable.rx_gain_range_min;
else
dm_digtable.cur_ig_value = dm_digtable.rssi_val+10-dm_digtable.backoff_val;
- }
- else /* current state is disconnected */
- {
- if(dm_digtable.cur_ig_value == 0)
+ } else { /* current state is disconnected */
+ if (dm_digtable.cur_ig_value == 0)
dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
else
dm_digtable.cur_ig_value = dm_digtable.pre_ig_value;
}
- }
- else /* disconnected -> connected or connected -> disconnected */
- {
+ } else { /* disconnected -> connected or connected -> disconnected */
dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
dm_digtable.pre_ig_value = 0;
}
/*DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);*/
/* if silent reset happened, we should rewrite the values back */
- if(priv->reset_count != reset_cnt)
- {
+ if (priv->reset_count != reset_cnt) {
force_write = 1;
reset_cnt = priv->reset_count;
}
@@ -2239,9 +2072,8 @@ static void dm_initial_gain(
force_write = 1;
{
- if((dm_digtable.pre_ig_value != dm_digtable.cur_ig_value)
- || !initialized || force_write)
- {
+ if ((dm_digtable.pre_ig_value != dm_digtable.cur_ig_value)
+ || !initialized || force_write) {
initial_gain = (u8)dm_digtable.cur_ig_value;
/*DbgPrint("Write initial gain = 0x%x\n", initial_gain);*/
/* Set initial gain. */
@@ -2263,16 +2095,13 @@ static void dm_pd_th(
static u8 initialized, force_write;
static u32 reset_cnt;
- if(dm_digtable.dig_algorithm_switch)
- {
+ if (dm_digtable.dig_algorithm_switch) {
initialized = 0;
reset_cnt = 0;
}
- if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state)
- {
- if(dm_digtable.cur_connect_state == DIG_CONNECT)
- {
+ if (dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) {
+ if (dm_digtable.cur_connect_state == DIG_CONNECT) {
if (dm_digtable.rssi_val >= dm_digtable.rssi_high_power_highthresh)
dm_digtable.curpd_thstate = DIG_PD_AT_HIGH_POWER;
else if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
@@ -2282,34 +2111,26 @@ static void dm_pd_th(
dm_digtable.curpd_thstate = DIG_PD_AT_NORMAL_POWER;
else
dm_digtable.curpd_thstate = dm_digtable.prepd_thstate;
- }
- else
- {
+ } else {
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
}
- }
- else /* disconnected -> connected or connected -> disconnected */
- {
+ } else { /* disconnected -> connected or connected -> disconnected */
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
}
/* if silent reset happened, we should rewrite the values back */
- if(priv->reset_count != reset_cnt)
- {
+ if (priv->reset_count != reset_cnt) {
force_write = 1;
reset_cnt = priv->reset_count;
}
{
- if((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
- (initialized<=3) || force_write)
- {
+ if ((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
+ (initialized <= 3) || force_write) {
/*DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);*/
- if(dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER)
- {
+ if (dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER) {
/* Lower PD_TH for OFDM. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
/*
* 2008/01/11 MH 40MHZ 90/92 register are not the same.
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
@@ -2318,15 +2139,11 @@ static void dm_pd_th(
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- }
- else if(dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER)
- {
+ } else if (dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER) {
/* Higher PD_TH for OFDM. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
/*
* 2008/01/11 MH 40MHZ 90/92 register are not the same.
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
@@ -2335,25 +2152,20 @@ static void dm_pd_th(
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
- }
- else if(dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER)
- {
+ } else if (dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER) {
/* Higher PD_TH for OFDM for high power state. */
- if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
- {
+ if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
*/
- }
- else
+ } else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
}
dm_digtable.prepd_thstate = dm_digtable.curpd_thstate;
- if(initialized <= 3)
+ if (initialized <= 3)
initialized++;
force_write = 0;
}
@@ -2367,53 +2179,39 @@ static void dm_cs_ratio(
static u8 initialized, force_write;
static u32 reset_cnt;
- if(dm_digtable.dig_algorithm_switch)
- {
+ if (dm_digtable.dig_algorithm_switch) {
initialized = 0;
reset_cnt = 0;
}
- if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state)
- {
- if(dm_digtable.cur_connect_state == DIG_CONNECT)
- {
+ if (dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) {
+ if (dm_digtable.cur_connect_state == DIG_CONNECT) {
if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh))
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_HIGHER;
else
dm_digtable.curcs_ratio_state = dm_digtable.precs_ratio_state;
- }
- else
- {
+ } else {
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
}
- }
- else /* disconnected -> connected or connected -> disconnected */
- {
+ } else /* disconnected -> connected or connected -> disconnected */
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
- }
/* if silent reset happened, we should rewrite the values back */
- if(priv->reset_count != reset_cnt)
- {
+ if (priv->reset_count != reset_cnt) {
force_write = 1;
reset_cnt = priv->reset_count;
}
-
{
- if((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
- !initialized || force_write)
- {
+ if ((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
+ !initialized || force_write) {
/*DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);*/
- if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER)
- {
+ if (dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER) {
/* Lower CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0x08);
- }
- else if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_HIGHER)
- {
+ } else if (dm_digtable.curcs_ratio_state == DIG_CS_RATIO_HIGHER) {
/* Higher CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0xcd);
}
@@ -2450,34 +2248,27 @@ static void dm_check_edca_turbo(
* Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters
* should follow the settings from QAP. By Bruce, 2007-12-07.
*/
- if(priv->ieee80211->state != IEEE80211_LINKED)
+ if (priv->ieee80211->state != IEEE80211_LINKED)
goto dm_CheckEdcaTurbo_EXIT;
/* We do not turn on EDCA turbo mode for some AP that has IOT issue */
- if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
+ if (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
goto dm_CheckEdcaTurbo_EXIT;
- /*printk("========>%s():bis_any_nonbepkts is %d\n",__func__,priv->bis_any_nonbepkts);*/
+ /*printk("========>%s():bis_any_nonbepkts is %d\n", __func__, priv->bis_any_nonbepkts);*/
/* Check the status for current condition. */
- if(!priv->ieee80211->bis_any_nonbepkts)
- {
+ if (!priv->ieee80211->bis_any_nonbepkts) {
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
/* For RT-AP, we needs to turn it on when Rx>Tx */
- if(curRxOkCnt > 4*curTxOkCnt)
- {
+ if (curRxOkCnt > 4*curTxOkCnt) {
/*printk("%s():curRxOkCnt > 4*curTxOkCnt\n");*/
- if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
- {
+ if (!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) {
write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
priv->bis_cur_rdlstate = true;
}
- }
- else
- {
-
+ } else {
/*printk("%s():curRxOkCnt < 4*curTxOkCnt\n");*/
- if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
- {
+ if (priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) {
write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
priv->bis_cur_rdlstate = false;
}
@@ -2485,16 +2276,12 @@ static void dm_check_edca_turbo(
}
priv->bcurrent_turbo_EDCA = true;
- }
- else
- {
+ } else {
/*
* Turn Off EDCA turbo here.
* Restore original EDCA according to the declaration of AP.
*/
- if(priv->bcurrent_turbo_EDCA)
- {
-
+ if (priv->bcurrent_turbo_EDCA) {
{
u8 u1bAIFS;
u32 u4bAcParam;
@@ -2503,10 +2290,10 @@ static void dm_check_edca_turbo(
/* For Each time updating EDCA parameter, reset EDCA turbo mode status. */
dm_init_edca_turbo(dev);
- u1bAIFS = qos_parameters->aifs[0] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
- u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[0]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
- (((u32)(qos_parameters->cw_max[0]))<< AC_PARAM_ECW_MAX_OFFSET)|
- (((u32)(qos_parameters->cw_min[0]))<< AC_PARAM_ECW_MIN_OFFSET)|
+ u1bAIFS = qos_parameters->aifs[0] * ((mode&(IEEE_G|IEEE_N_24G)) ? 9 : 20) + aSifsTime;
+ u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[0])) << AC_PARAM_TXOP_LIMIT_OFFSET)|
+ (((u32)(qos_parameters->cw_max[0])) << AC_PARAM_ECW_MAX_OFFSET)|
+ (((u32)(qos_parameters->cw_min[0])) << AC_PARAM_ECW_MIN_OFFSET)|
((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
/*write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);*/
write_nic_dword(dev, EDCAPARA_BE, u4bAcParam);
@@ -2520,17 +2307,16 @@ static void dm_check_edca_turbo(
PACI_AIFSN pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]);
u8 AcmCtrl;
+
read_nic_byte(dev, AcmHwCtrl, &AcmCtrl);
- if(pAciAifsn->f.ACM)
- { /* ACM bit is 1. */
+
+ if (pAciAifsn->f.ACM) { /* ACM bit is 1. */
AcmCtrl |= AcmHw_BeqEn;
- }
- else
- { /* ACM bit is 0. */
+ } else { /* ACM bit is 0. */
AcmCtrl &= (~AcmHw_BeqEn);
}
- RT_TRACE(COMP_QOS,"SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl) ;
+ RT_TRACE(COMP_QOS, "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
write_nic_byte(dev, AcmHwCtrl, AcmCtrl);
}
}
@@ -2538,7 +2324,6 @@ static void dm_check_edca_turbo(
}
}
-
dm_CheckEdcaTurbo_EXIT:
/* Set variables for next time. */
priv->ieee80211->bis_any_nonbepkts = false;
@@ -2563,8 +2348,7 @@ static void dm_ctstoself(struct net_device *dev)
unsigned long curTxOkCnt = 0;
unsigned long curRxOkCnt = 0;
- if(priv->ieee80211->bCTSToSelfEnable != TRUE)
- {
+ if (priv->ieee80211->bCTSToSelfEnable != TRUE) {
pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
return;
}
@@ -2574,17 +2358,13 @@ static void dm_ctstoself(struct net_device *dev)
3. <50 disable, >55 enable
*/
- if(pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM)
- {
+ if (pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM) {
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
- if(curRxOkCnt > 4*curTxOkCnt) /* downlink, disable CTS to self */
- {
+ if (curRxOkCnt > 4*curTxOkCnt) { /* downlink, disable CTS to self */
pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
/*DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");*/
- }
- else /* uplink */
- {
+ } else { /* uplink */
pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
}
@@ -2614,13 +2394,11 @@ static void dm_check_pbc_gpio(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u8 tmp1byte;
-
read_nic_byte(dev, GPI, &tmp1byte);
- if(tmp1byte == 0xff)
+ if (tmp1byte == 0xff)
return;
- if (tmp1byte&BIT6 || tmp1byte&BIT0)
- {
+ if (tmp1byte&BIT6 || tmp1byte&BIT0) {
/*
* Here we only set bPbcPressed to TRUE
* After trigger PBC, the variable will be set to FALSE
@@ -2649,26 +2427,24 @@ static void dm_check_pbc_gpio(struct net_device *dev)
*---------------------------------------------------------------------------*/
void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
{
- struct delayed_work *dwork = container_of(work,struct delayed_work,work);
- struct r8192_priv *priv = container_of(dwork,struct r8192_priv,rfpath_check_wq);
- struct net_device *dev =priv->ieee80211->dev;
- /*bool bactually_set = false;*/
+ struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+ struct r8192_priv *priv = container_of(dwork, struct r8192_priv, rfpath_check_wq);
+ struct net_device *dev = priv->ieee80211->dev;
+ /*bool bactually_set = false;*/
u8 rfpath = 0, i;
-
/* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
always be the same. We only read 0xc04 now. */
read_nic_byte(dev, 0xc04, &rfpath);
/* Check Bit 0-3, it means if RF A-D is enabled. */
- for (i = 0; i < RF90_PATH_MAX; i++)
- {
+ for (i = 0; i < RF90_PATH_MAX; i++) {
if (rfpath & (0x01<<i))
priv->brfpath_rxenable[i] = 1;
else
priv->brfpath_rxenable[i] = 0;
}
- if(!DM_RxPathSelTable.Enable)
+ if (!DM_RxPathSelTable.Enable)
return;
dm_rxpath_sel_byrssi(dev);
@@ -2678,17 +2454,17 @@ static void dm_init_rxpath_selection(struct net_device *dev)
{
u8 i;
struct r8192_priv *priv = ieee80211_priv(dev);
+
DM_RxPathSelTable.Enable = 1; /* default enabled */
DM_RxPathSelTable.SS_TH_low = RxPathSelection_SS_TH_low;
DM_RxPathSelTable.diff_TH = RxPathSelection_diff_TH;
- if(priv->CustomerID == RT_CID_819x_Netcore)
+ if (priv->CustomerID == RT_CID_819x_Netcore)
DM_RxPathSelTable.cck_method = CCK_Rx_Version_2;
else
DM_RxPathSelTable.cck_method = CCK_Rx_Version_1;
DM_RxPathSelTable.DbgMode = DM_DBG_OFF;
DM_RxPathSelTable.disabledRF = 0;
- for(i=0; i<4; i++)
- {
+ for (i = 0; i < 4; i++) {
DM_RxPathSelTable.rf_rssi[i] = 50;
DM_RxPathSelTable.cck_pwdb_sta[i] = -64;
DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
@@ -2698,22 +2474,21 @@ static void dm_init_rxpath_selection(struct net_device *dev)
static void dm_rxpath_sel_byrssi(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- u8 i, max_rssi_index=0, min_rssi_index=0, sec_rssi_index=0, rf_num=0;
- u8 tmp_max_rssi=0, tmp_min_rssi=0, tmp_sec_rssi=0;
- u8 cck_default_Rx=0x2; /* RF-C */
- u8 cck_optional_Rx=0x3; /* RF-D */
- long tmp_cck_max_pwdb=0, tmp_cck_min_pwdb=0, tmp_cck_sec_pwdb=0;
- u8 cck_rx_ver2_max_index=0, cck_rx_ver2_min_index=0, cck_rx_ver2_sec_index=0;
+ u8 i, max_rssi_index = 0, min_rssi_index = 0, sec_rssi_index = 0, rf_num = 0;
+ u8 tmp_max_rssi = 0, tmp_min_rssi = 0, tmp_sec_rssi = 0;
+ u8 cck_default_Rx = 0x2; /* RF-C */
+ u8 cck_optional_Rx = 0x3; /* RF-D */
+ long tmp_cck_max_pwdb = 0, tmp_cck_min_pwdb = 0, tmp_cck_sec_pwdb = 0;
+ u8 cck_rx_ver2_max_index = 0, cck_rx_ver2_min_index = 0, cck_rx_ver2_sec_index = 0;
u8 cur_rf_rssi;
long cur_cck_pwdb;
static u8 disabled_rf_cnt, cck_Rx_Path_initialized;
u8 update_cck_rx_path;
- if(priv->rf_type != RF_2T4R)
+ if (priv->rf_type != RF_2T4R)
return;
- if(!cck_Rx_Path_initialized)
- {
+ if (!cck_Rx_Path_initialized) {
read_nic_byte(dev, 0xa07, &DM_RxPathSelTable.cck_Rx_path);
DM_RxPathSelTable.cck_Rx_path &= 0xf;
cck_Rx_Path_initialized = 1;
@@ -2722,91 +2497,63 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
read_nic_byte(dev, 0xc04, &DM_RxPathSelTable.disabledRF);
DM_RxPathSelTable.disabledRF = ~DM_RxPathSelTable.disabledRF & 0xf;
- if(priv->ieee80211->mode == WIRELESS_MODE_B)
- {
+ if (priv->ieee80211->mode == WIRELESS_MODE_B) {
DM_RxPathSelTable.cck_method = CCK_Rx_Version_2; /* pure B mode, fixed cck version2 */
- /*DbgPrint("Pure B mode, use cck rx version2 \n");*/
+ /*DbgPrint("Pure B mode, use cck rx version2\n");*/
}
/* decide max/sec/min rssi index */
- for (i=0; i<RF90_PATH_MAX; i++)
- {
- if(!DM_RxPathSelTable.DbgMode)
+ for (i = 0; i < RF90_PATH_MAX; i++) {
+ if (!DM_RxPathSelTable.DbgMode)
DM_RxPathSelTable.rf_rssi[i] = priv->stats.rx_rssi_percentage[i];
- if(priv->brfpath_rxenable[i])
- {
+ if (priv->brfpath_rxenable[i]) {
rf_num++;
cur_rf_rssi = DM_RxPathSelTable.rf_rssi[i];
- if(rf_num == 1)
- { /* find first enabled rf path and the rssi values */
+ if (rf_num == 1) { /* find first enabled rf path and the rssi values */
/* initialize, set all rssi index to the same one */
max_rssi_index = min_rssi_index = sec_rssi_index = i;
tmp_max_rssi = tmp_min_rssi = tmp_sec_rssi = cur_rf_rssi;
- }
- else if(rf_num == 2)
- { /* we pick up the max index first, and let sec and min to be the same one */
- if(cur_rf_rssi >= tmp_max_rssi)
- {
+ } else if (rf_num == 2) { /* we pick up the max index first, and let sec and min to be the same one */
+ if (cur_rf_rssi >= tmp_max_rssi) {
tmp_max_rssi = cur_rf_rssi;
max_rssi_index = i;
- }
- else
- {
+ } else {
tmp_sec_rssi = tmp_min_rssi = cur_rf_rssi;
sec_rssi_index = min_rssi_index = i;
}
- }
- else
- {
- if(cur_rf_rssi > tmp_max_rssi)
- {
+ } else {
+ if (cur_rf_rssi > tmp_max_rssi) {
tmp_sec_rssi = tmp_max_rssi;
sec_rssi_index = max_rssi_index;
tmp_max_rssi = cur_rf_rssi;
max_rssi_index = i;
- }
- else if(cur_rf_rssi == tmp_max_rssi)
- { /* let sec and min point to the different index */
+ } else if (cur_rf_rssi == tmp_max_rssi) { /* let sec and min point to the different index */
tmp_sec_rssi = cur_rf_rssi;
sec_rssi_index = i;
- }
- else if((cur_rf_rssi < tmp_max_rssi) &&(cur_rf_rssi > tmp_sec_rssi))
- {
+ } else if ((cur_rf_rssi < tmp_max_rssi) && (cur_rf_rssi > tmp_sec_rssi)) {
tmp_sec_rssi = cur_rf_rssi;
sec_rssi_index = i;
- }
- else if(cur_rf_rssi == tmp_sec_rssi)
- {
- if(tmp_sec_rssi == tmp_min_rssi)
- { /* let sec and min point to the different index */
+ } else if (cur_rf_rssi == tmp_sec_rssi) {
+ if (tmp_sec_rssi == tmp_min_rssi) {
+ /* let sec and min point to the different index */
tmp_sec_rssi = cur_rf_rssi;
sec_rssi_index = i;
- }
- else
- {
+ } else {
/* This case we don't need to set any index */
}
- }
- else if((cur_rf_rssi < tmp_sec_rssi) && (cur_rf_rssi > tmp_min_rssi))
- {
+ } else if ((cur_rf_rssi < tmp_sec_rssi) && (cur_rf_rssi > tmp_min_rssi)) {
/* This case we don't need to set any index */
- }
- else if(cur_rf_rssi == tmp_min_rssi)
- {
- if(tmp_sec_rssi == tmp_min_rssi)
- { /* let sec and min point to the different index */
+ } else if (cur_rf_rssi == tmp_min_rssi) {
+ if (tmp_sec_rssi == tmp_min_rssi) {
+ /* let sec and min point to the different index */
tmp_min_rssi = cur_rf_rssi;
min_rssi_index = i;
- }
- else
- {
+ } else {
/* This case we don't need to set any index */
}
- }
- else if(cur_rf_rssi < tmp_min_rssi)
- {
+ } else if (cur_rf_rssi < tmp_min_rssi) {
tmp_min_rssi = cur_rf_rssi;
min_rssi_index = i;
}
@@ -2816,82 +2563,53 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
rf_num = 0;
/* decide max/sec/min cck pwdb index */
- if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
- {
- for (i=0; i<RF90_PATH_MAX; i++)
- {
- if(priv->brfpath_rxenable[i])
- {
+ if (DM_RxPathSelTable.cck_method == CCK_Rx_Version_2) {
+ for (i = 0; i < RF90_PATH_MAX; i++) {
+ if (priv->brfpath_rxenable[i]) {
rf_num++;
cur_cck_pwdb = DM_RxPathSelTable.cck_pwdb_sta[i];
- if(rf_num == 1) /* find first enabled rf path and the rssi values */
- { /* initialize, set all rssi index to the same one */
+ if (rf_num == 1) { /* find first enabled rf path and the rssi values */
+ /* initialize, set all rssi index to the same one */
cck_rx_ver2_max_index = cck_rx_ver2_min_index = cck_rx_ver2_sec_index = i;
tmp_cck_max_pwdb = tmp_cck_min_pwdb = tmp_cck_sec_pwdb = cur_cck_pwdb;
- }
- else if(rf_num == 2)
- { /* we pick up the max index first, and let sec and min to be the same one */
- if(cur_cck_pwdb >= tmp_cck_max_pwdb)
- {
+ } else if (rf_num == 2) { /* we pick up the max index first, and let sec and min to be the same one */
+ if (cur_cck_pwdb >= tmp_cck_max_pwdb) {
tmp_cck_max_pwdb = cur_cck_pwdb;
cck_rx_ver2_max_index = i;
- }
- else
- {
+ } else {
tmp_cck_sec_pwdb = tmp_cck_min_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = cck_rx_ver2_min_index = i;
}
- }
- else
- {
- if(cur_cck_pwdb > tmp_cck_max_pwdb)
- {
+ } else {
+ if (cur_cck_pwdb > tmp_cck_max_pwdb) {
tmp_cck_sec_pwdb = tmp_cck_max_pwdb;
cck_rx_ver2_sec_index = cck_rx_ver2_max_index;
tmp_cck_max_pwdb = cur_cck_pwdb;
cck_rx_ver2_max_index = i;
- }
- else if(cur_cck_pwdb == tmp_cck_max_pwdb)
- { /* let sec and min point to the different index */
+ } else if (cur_cck_pwdb == tmp_cck_max_pwdb) { /* let sec and min point to the different index */
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
- }
- else if((cur_cck_pwdb < tmp_cck_max_pwdb) &&(cur_cck_pwdb > tmp_cck_sec_pwdb))
- {
+ } else if ((cur_cck_pwdb < tmp_cck_max_pwdb) && (cur_cck_pwdb > tmp_cck_sec_pwdb)) {
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
- }
- else if(cur_cck_pwdb == tmp_cck_sec_pwdb)
- {
- if(tmp_cck_sec_pwdb == tmp_cck_min_pwdb)
- { /* let sec and min point to the different index */
+ } else if (cur_cck_pwdb == tmp_cck_sec_pwdb) {
+ if (tmp_cck_sec_pwdb == tmp_cck_min_pwdb) { /* let sec and min point to the different index */
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
- }
- else
- {
+ } else {
/* This case we don't need to set any index */
}
- }
- else if((cur_cck_pwdb < tmp_cck_sec_pwdb) && (cur_cck_pwdb > tmp_cck_min_pwdb))
- {
+ } else if ((cur_cck_pwdb < tmp_cck_sec_pwdb) && (cur_cck_pwdb > tmp_cck_min_pwdb)) {
/* This case we don't need to set any index */
- }
- else if(cur_cck_pwdb == tmp_cck_min_pwdb)
- {
- if(tmp_cck_sec_pwdb == tmp_cck_min_pwdb)
- { /* let sec and min point to the different index */
+ } else if (cur_cck_pwdb == tmp_cck_min_pwdb) {
+ if (tmp_cck_sec_pwdb == tmp_cck_min_pwdb) { /* let sec and min point to the different index */
tmp_cck_min_pwdb = cur_cck_pwdb;
cck_rx_ver2_min_index = i;
- }
- else
- {
+ } else {
/* This case we don't need to set any index */
}
- }
- else if(cur_cck_pwdb < tmp_cck_min_pwdb)
- {
+ } else if (cur_cck_pwdb < tmp_cck_min_pwdb) {
tmp_cck_min_pwdb = cur_cck_pwdb;
cck_rx_ver2_min_index = i;
}
@@ -2901,24 +2619,20 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
}
}
-
/*
* Set CCK Rx path
* reg0xA07[3:2]=cck default rx path, reg0xa07[1:0]=cck optional rx path.
*/
update_cck_rx_path = 0;
- if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
- {
+ if (DM_RxPathSelTable.cck_method == CCK_Rx_Version_2) {
cck_default_Rx = cck_rx_ver2_max_index;
cck_optional_Rx = cck_rx_ver2_sec_index;
- if(tmp_cck_max_pwdb != -64)
+ if (tmp_cck_max_pwdb != -64)
update_cck_rx_path = 1;
}
- if(tmp_min_rssi < DM_RxPathSelTable.SS_TH_low && disabled_rf_cnt < 2)
- {
- if((tmp_max_rssi - tmp_min_rssi) >= DM_RxPathSelTable.diff_TH)
- {
+ if (tmp_min_rssi < DM_RxPathSelTable.SS_TH_low && disabled_rf_cnt < 2) {
+ if ((tmp_max_rssi - tmp_min_rssi) >= DM_RxPathSelTable.diff_TH) {
/* record the enabled rssi threshold */
DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] = tmp_max_rssi+5;
/* disable the BB Rx path, OFDM */
@@ -2926,31 +2640,25 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0); /* 0xd04[3:0] */
disabled_rf_cnt++;
}
- if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_1)
- {
+ if (DM_RxPathSelTable.cck_method == CCK_Rx_Version_1) {
cck_default_Rx = max_rssi_index;
cck_optional_Rx = sec_rssi_index;
- if(tmp_max_rssi)
+ if (tmp_max_rssi)
update_cck_rx_path = 1;
}
}
- if(update_cck_rx_path)
- {
+ if (update_cck_rx_path) {
DM_RxPathSelTable.cck_Rx_path = (cck_default_Rx<<2)|(cck_optional_Rx);
rtl8192_setBBreg(dev, rCCK0_AFESetting, 0x0f000000, DM_RxPathSelTable.cck_Rx_path);
}
- if(DM_RxPathSelTable.disabledRF)
- {
- for(i=0; i<4; i++)
- {
- if((DM_RxPathSelTable.disabledRF>>i) & 0x1) /* disabled rf */
- {
- if(tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i])
- {
+ if (DM_RxPathSelTable.disabledRF) {
+ for (i = 0; i < 4; i++) {
+ if ((DM_RxPathSelTable.disabledRF>>i) & 0x1) { /* disabled rf */
+ if (tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i]) {
/* enable the BB Rx path */
- /*DbgPrint("RF-%d is enabled. \n", 0x1<<i);*/
+ /*DbgPrint("RF-%d is enabled.\n", 0x1<<i);*/
rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); /* 0xc04[3:0] */
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); /* 0xd04[3:0] */
DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
@@ -2977,14 +2685,14 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
* 05/28/2008 amy Create Version 0 porting from windows code.
*
*---------------------------------------------------------------------------*/
-static void dm_check_rx_path_selection(struct net_device *dev)
+static void dm_check_rx_path_selection(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- queue_delayed_work(priv->priv_wq,&priv->rfpath_check_wq,0);
-} /* dm_CheckRxRFPath */
+ queue_delayed_work(priv->priv_wq, &priv->rfpath_check_wq, 0);
+} /* dm_CheckRxRFPath */
-static void dm_init_fsync (struct net_device *dev)
+static void dm_init_fsync(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -2993,8 +2701,8 @@ static void dm_init_fsync (struct net_device *dev)
priv->ieee80211->fsync_rssi_threshold = 30;
priv->ieee80211->bfsync_enable = false;
priv->ieee80211->fsync_multiple_timeinterval = 3;
- priv->ieee80211->fsync_firstdiff_ratethreshold= 100;
- priv->ieee80211->fsync_seconddiff_ratethreshold= 200;
+ priv->ieee80211->fsync_firstdiff_ratethreshold = 100;
+ priv->ieee80211->fsync_seconddiff_ratethreshold = 200;
priv->ieee80211->fsync_state = Default_Fsync;
priv->framesyncMonitor = 1; /* current default 0xc38 monitor on */
@@ -3003,10 +2711,10 @@ static void dm_init_fsync (struct net_device *dev)
priv->fsync_timer.function = dm_fsync_timer_callback;
}
-
static void dm_deInit_fsync(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
+
del_timer_sync(&priv->fsync_timer);
}
@@ -3014,102 +2722,84 @@ void dm_fsync_timer_callback(unsigned long data)
{
struct net_device *dev = (struct net_device *)data;
struct r8192_priv *priv = ieee80211_priv((struct net_device *)data);
- u32 rate_index, rate_count = 0, rate_count_diff=0;
+ u32 rate_index, rate_count = 0, rate_count_diff = 0;
bool bSwitchFromCountDiff = false;
bool bDoubleTimeInterval = false;
- if(priv->ieee80211->state == IEEE80211_LINKED &&
+ if (priv->ieee80211->state == IEEE80211_LINKED &&
priv->ieee80211->bfsync_enable &&
- (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC))
- {
+ (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC)) {
/* Count rate 54, MCS [7], [12, 13, 14, 15] */
u32 rate_bitmap;
- for(rate_index = 0; rate_index <= 27; rate_index++)
- {
+
+ for (rate_index = 0; rate_index <= 27; rate_index++) {
rate_bitmap = 1 << rate_index;
- if(priv->ieee80211->fsync_rate_bitmap & rate_bitmap)
- rate_count+= priv->stats.received_rate_histogram[1][rate_index];
+ if (priv->ieee80211->fsync_rate_bitmap & rate_bitmap)
+ rate_count += priv->stats.received_rate_histogram[1][rate_index];
}
- if(rate_count < priv->rate_record)
+ if (rate_count < priv->rate_record)
rate_count_diff = 0xffffffff - rate_count + priv->rate_record;
else
rate_count_diff = rate_count - priv->rate_record;
- if(rate_count_diff < priv->rateCountDiffRecord)
- {
-
+ if (rate_count_diff < priv->rateCountDiffRecord) {
u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
/* Continue count */
- if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
+ if (DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
priv->ContinueDiffCount++;
else
priv->ContinueDiffCount = 0;
/* Continue count over */
- if(priv->ContinueDiffCount >=2)
- {
+ if (priv->ContinueDiffCount >= 2) {
bSwitchFromCountDiff = true;
priv->ContinueDiffCount = 0;
}
- }
- else
- {
+ } else {
/* Stop the continued count */
priv->ContinueDiffCount = 0;
}
/* If Count diff <= FsyncRateCountThreshold */
- if(rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold)
- {
+ if (rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold) {
bSwitchFromCountDiff = true;
priv->ContinueDiffCount = 0;
}
priv->rate_record = rate_count;
priv->rateCountDiffRecord = rate_count_diff;
- RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
+ RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff, priv->bswitch_fsync);
/* if we never receive those mcs rate and rssi > 30 % then switch fsyn */
- if(priv->undecorated_smoothed_pwdb > priv->ieee80211->fsync_rssi_threshold && bSwitchFromCountDiff)
- {
+ if (priv->undecorated_smoothed_pwdb > priv->ieee80211->fsync_rssi_threshold && bSwitchFromCountDiff) {
bDoubleTimeInterval = true;
priv->bswitch_fsync = !priv->bswitch_fsync;
- if(priv->bswitch_fsync)
- {
+ if (priv->bswitch_fsync) {
write_nic_byte(dev, 0xC36, 0x1c);
write_nic_byte(dev, 0xC3e, 0x90);
- }
- else
- {
+ } else {
write_nic_byte(dev, 0xC36, 0x5c);
write_nic_byte(dev, 0xC3e, 0x96);
}
- }
- else if(priv->undecorated_smoothed_pwdb <= priv->ieee80211->fsync_rssi_threshold)
- {
- if(priv->bswitch_fsync)
- {
+ } else if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->fsync_rssi_threshold) {
+ if (priv->bswitch_fsync) {
priv->bswitch_fsync = false;
write_nic_byte(dev, 0xC36, 0x5c);
write_nic_byte(dev, 0xC3e, 0x96);
}
}
- if(bDoubleTimeInterval){
- if(timer_pending(&priv->fsync_timer))
+ if (bDoubleTimeInterval) {
+ if (timer_pending(&priv->fsync_timer))
del_timer_sync(&priv->fsync_timer);
priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval*priv->ieee80211->fsync_multiple_timeinterval);
add_timer(&priv->fsync_timer);
- }
- else{
- if(timer_pending(&priv->fsync_timer))
+ } else {
+ if (timer_pending(&priv->fsync_timer))
del_timer_sync(&priv->fsync_timer);
priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval);
add_timer(&priv->fsync_timer);
}
- }
- else
- {
+ } else {
/* Let Register return to default value; */
- if(priv->bswitch_fsync)
- {
+ if (priv->bswitch_fsync) {
priv->bswitch_fsync = false;
write_nic_byte(dev, 0xC36, 0x5c);
write_nic_byte(dev, 0xC3e, 0x96);
@@ -3118,7 +2808,7 @@ void dm_fsync_timer_callback(unsigned long data)
write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
}
RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount);
- RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
+ RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff, priv->bswitch_fsync);
}
static void dm_StartHWFsync(struct net_device *dev)
@@ -3136,8 +2826,7 @@ static void dm_EndSWFsync(struct net_device *dev)
del_timer_sync(&(priv->fsync_timer));
/* Let Register return to default value; */
- if(priv->bswitch_fsync)
- {
+ if (priv->bswitch_fsync) {
priv->bswitch_fsync = false;
write_nic_byte(dev, 0xC36, 0x5c);
@@ -3164,23 +2853,19 @@ static void dm_StartSWFsync(struct net_device *dev)
priv->rateCountDiffRecord = 0;
priv->bswitch_fsync = false;
- if(priv->ieee80211->mode == WIRELESS_MODE_N_24G)
- {
- priv->ieee80211->fsync_firstdiff_ratethreshold= 600;
+ if (priv->ieee80211->mode == WIRELESS_MODE_N_24G) {
+ priv->ieee80211->fsync_firstdiff_ratethreshold = 600;
priv->ieee80211->fsync_seconddiff_ratethreshold = 0xffff;
- }
- else
- {
- priv->ieee80211->fsync_firstdiff_ratethreshold= 200;
+ } else {
+ priv->ieee80211->fsync_firstdiff_ratethreshold = 200;
priv->ieee80211->fsync_seconddiff_ratethreshold = 200;
}
- for(rateIndex = 0; rateIndex <= 27; rateIndex++)
- {
- rateBitmap = 1 << rateIndex;
- if(priv->ieee80211->fsync_rate_bitmap & rateBitmap)
+ for (rateIndex = 0; rateIndex <= 27; rateIndex++) {
+ rateBitmap = 1 << rateIndex;
+ if (priv->ieee80211->fsync_rate_bitmap & rateBitmap)
priv->rate_record += priv->stats.received_rate_histogram[1][rateIndex];
}
- if(timer_pending(&priv->fsync_timer))
+ if (timer_pending(&priv->fsync_timer))
del_timer_sync(&priv->fsync_timer);
priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval);
add_timer(&priv->fsync_timer);
@@ -3200,139 +2885,112 @@ static void dm_EndHWFsync(struct net_device *dev)
void dm_check_fsync(struct net_device *dev)
{
#define RegC38_Default 0
-#define RegC38_NonFsync_Other_AP 1
-#define RegC38_Fsync_AP_BCM 2
+#define RegC38_NonFsync_Other_AP 1
+#define RegC38_Fsync_AP_BCM 2
struct r8192_priv *priv = ieee80211_priv(dev);
/*u32 framesyncC34;*/
- static u8 reg_c38_State=RegC38_Default;
+ static u8 reg_c38_State = RegC38_Default;
static u32 reset_cnt;
RT_TRACE(COMP_HALDM, "RSSI %d TimeInterval %d MultipleTimeInterval %d\n", priv->ieee80211->fsync_rssi_threshold, priv->ieee80211->fsync_time_interval, priv->ieee80211->fsync_multiple_timeinterval);
RT_TRACE(COMP_HALDM, "RateBitmap 0x%x FirstDiffRateThreshold %d SecondDiffRateThreshold %d\n", priv->ieee80211->fsync_rate_bitmap, priv->ieee80211->fsync_firstdiff_ratethreshold, priv->ieee80211->fsync_seconddiff_ratethreshold);
- if(priv->ieee80211->state == IEEE80211_LINKED &&
- (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC))
- {
- if(priv->ieee80211->bfsync_enable == 0)
- {
- switch (priv->ieee80211->fsync_state)
- {
- case Default_Fsync:
- dm_StartHWFsync(dev);
- priv->ieee80211->fsync_state = HW_Fsync;
- break;
- case SW_Fsync:
- dm_EndSWFsync(dev);
- dm_StartHWFsync(dev);
- priv->ieee80211->fsync_state = HW_Fsync;
- break;
- case HW_Fsync:
- default:
- break;
+ if (priv->ieee80211->state == IEEE80211_LINKED &&
+ (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC)) {
+ if (priv->ieee80211->bfsync_enable == 0) {
+ switch (priv->ieee80211->fsync_state) {
+ case Default_Fsync:
+ dm_StartHWFsync(dev);
+ priv->ieee80211->fsync_state = HW_Fsync;
+ break;
+ case SW_Fsync:
+ dm_EndSWFsync(dev);
+ dm_StartHWFsync(dev);
+ priv->ieee80211->fsync_state = HW_Fsync;
+ break;
+ case HW_Fsync:
+ default:
+ break;
}
- }
- else
- {
- switch (priv->ieee80211->fsync_state)
- {
- case Default_Fsync:
- dm_StartSWFsync(dev);
- priv->ieee80211->fsync_state = SW_Fsync;
- break;
- case HW_Fsync:
- dm_EndHWFsync(dev);
- dm_StartSWFsync(dev);
- priv->ieee80211->fsync_state = SW_Fsync;
- break;
- case SW_Fsync:
- default:
- break;
-
+ } else {
+ switch (priv->ieee80211->fsync_state) {
+ case Default_Fsync:
+ dm_StartSWFsync(dev);
+ priv->ieee80211->fsync_state = SW_Fsync;
+ break;
+ case HW_Fsync:
+ dm_EndHWFsync(dev);
+ dm_StartSWFsync(dev);
+ priv->ieee80211->fsync_state = SW_Fsync;
+ break;
+ case SW_Fsync:
+ default:
+ break;
}
}
- if(priv->framesyncMonitor)
- {
- if(reg_c38_State != RegC38_Fsync_AP_BCM)
- { /* For broadcom AP we write different default value */
+ if (priv->framesyncMonitor) {
+ if (reg_c38_State != RegC38_Fsync_AP_BCM) {
+ /* For broadcom AP we write different default value */
write_nic_byte(dev, rOFDM0_RxDetector3, 0x95);
reg_c38_State = RegC38_Fsync_AP_BCM;
}
}
- }
- else
- {
- switch (priv->ieee80211->fsync_state)
- {
- case HW_Fsync:
- dm_EndHWFsync(dev);
- priv->ieee80211->fsync_state = Default_Fsync;
- break;
- case SW_Fsync:
- dm_EndSWFsync(dev);
- priv->ieee80211->fsync_state = Default_Fsync;
- break;
- case Default_Fsync:
- default:
- break;
+ } else {
+ switch (priv->ieee80211->fsync_state) {
+ case HW_Fsync:
+ dm_EndHWFsync(dev);
+ priv->ieee80211->fsync_state = Default_Fsync;
+ break;
+ case SW_Fsync:
+ dm_EndSWFsync(dev);
+ priv->ieee80211->fsync_state = Default_Fsync;
+ break;
+ case Default_Fsync:
+ default:
+ break;
}
- if(priv->framesyncMonitor)
- {
- if(priv->ieee80211->state == IEEE80211_LINKED)
- {
- if(priv->undecorated_smoothed_pwdb <= RegC38_TH)
- {
- if(reg_c38_State != RegC38_NonFsync_Other_AP)
- {
+ if (priv->framesyncMonitor) {
+ if (priv->ieee80211->state == IEEE80211_LINKED) {
+ if (priv->undecorated_smoothed_pwdb <= RegC38_TH) {
+ if (reg_c38_State != RegC38_NonFsync_Other_AP) {
write_nic_byte(dev, rOFDM0_RxDetector3, 0x90);
reg_c38_State = RegC38_NonFsync_Other_AP;
}
- }
- else if(priv->undecorated_smoothed_pwdb >= (RegC38_TH+5))
- {
- if(reg_c38_State)
- {
+ } else if (priv->undecorated_smoothed_pwdb >= (RegC38_TH+5)) {
+ if (reg_c38_State) {
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- /*DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);*/
+ /*DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x\n", pHalData->framesync);*/
}
}
- }
- else
- {
- if(reg_c38_State)
- {
+ } else {
+ if (reg_c38_State) {
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- /*DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x \n", pHalData->framesync);*/
+ /*DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x\n", pHalData->framesync);*/
}
}
}
}
- if(priv->framesyncMonitor)
- {
- if(priv->reset_count != reset_cnt)
- { /* After silent reset, the reg_c38_State will be returned to default value */
+ if (priv->framesyncMonitor) {
+ if (priv->reset_count != reset_cnt) { /* After silent reset, the reg_c38_State will be returned to default value */
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
reset_cnt = priv->reset_count;
- /*DbgPrint("reg_c38_State = 0 for silent reset. \n");*/
+ /*DbgPrint("reg_c38_State = 0 for silent reset.\n");*/
}
- }
- else
- {
- if(reg_c38_State)
- {
+ } else {
+ if (reg_c38_State) {
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- /*DbgPrint("framesync no monitor, write 0xc38 = 0x%x \n", pHalData->framesync);*/
+ /*DbgPrint("framesync no monitor, write 0xc38 = 0x%x\n", pHalData->framesync);*/
}
}
}
-
/*-----------------------------------------------------------------------------
* Function: dm_shadow_init()
*
@@ -3355,8 +3013,7 @@ void dm_shadow_init(struct net_device *dev)
u16 offset;
for (page = 0; page < 5; page++)
- for (offset = 0; offset < 256; offset++)
- {
+ for (offset = 0; offset < 256; offset++) {
read_nic_byte(dev, offset+page*256, &dm_shadow[page][offset]);
/*DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset, DM_Shadow[page][offset]);*/
}
@@ -3404,70 +3061,57 @@ static void dm_init_dynamic_txpower(struct net_device *dev)
static void dm_dynamic_txpower(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- unsigned int txhipower_threshhold=0;
- unsigned int txlowpower_threshold=0;
- if(priv->ieee80211->bdynamic_txpower_enable != true)
- {
+ unsigned int txhipower_threshhold = 0;
+ unsigned int txlowpower_threshold = 0;
+
+ if (priv->ieee80211->bdynamic_txpower_enable != true) {
priv->bDynamicTxHighPower = false;
priv->bDynamicTxLowPower = false;
return;
}
- /*printk("priv->ieee80211->current_network.unknown_cap_exist is %d ,priv->ieee80211->current_network.broadcom_cap_exist is %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);*/
- if((priv->ieee80211->current_network.atheros_cap_exist) && (priv->ieee80211->mode == IEEE_G)){
+ /*printk("priv->ieee80211->current_network.unknown_cap_exist is %d , priv->ieee80211->current_network.broadcom_cap_exist is %d\n", priv->ieee80211->current_network.unknown_cap_exist, priv->ieee80211->current_network.broadcom_cap_exist);*/
+ if ((priv->ieee80211->current_network.atheros_cap_exist) && (priv->ieee80211->mode == IEEE_G)) {
txhipower_threshhold = TX_POWER_ATHEROAP_THRESH_HIGH;
txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
- }
- else
- {
+ } else {
txhipower_threshhold = TX_POWER_NEAR_FIELD_THRESH_HIGH;
txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
}
- /*printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold is %d\n",__func__,txhipower_threshhold,txlowpower_threshold);*/
- RT_TRACE(COMP_TXAGC,"priv->undecorated_smoothed_pwdb = %ld \n" , priv->undecorated_smoothed_pwdb);
+ /*printk("=======>%s(): txhipower_threshhold is %d, txlowpower_threshold is %d\n", __func__, txhipower_threshhold, txlowpower_threshold);*/
+ RT_TRACE(COMP_TXAGC, "priv->undecorated_smoothed_pwdb = %ld\n", priv->undecorated_smoothed_pwdb);
- if(priv->ieee80211->state == IEEE80211_LINKED)
- {
- if(priv->undecorated_smoothed_pwdb >= txhipower_threshhold)
- {
+ if (priv->ieee80211->state == IEEE80211_LINKED) {
+ if (priv->undecorated_smoothed_pwdb >= txhipower_threshhold) {
priv->bDynamicTxHighPower = true;
priv->bDynamicTxLowPower = false;
- }
- else
- {
+ } else {
/* high power state check */
- if(priv->undecorated_smoothed_pwdb < txlowpower_threshold && priv->bDynamicTxHighPower == true)
- {
+ if (priv->undecorated_smoothed_pwdb < txlowpower_threshold && priv->bDynamicTxHighPower == true)
priv->bDynamicTxHighPower = false;
- }
+
/* low power state check */
- if(priv->undecorated_smoothed_pwdb < 35)
- {
+ if (priv->undecorated_smoothed_pwdb < 35) {
priv->bDynamicTxLowPower = true;
- }
- else if(priv->undecorated_smoothed_pwdb >= 40)
- {
+ } else if (priv->undecorated_smoothed_pwdb >= 40) {
priv->bDynamicTxLowPower = false;
}
}
- }
- else
- {
+ } else {
/*pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;*/
priv->bDynamicTxHighPower = false;
priv->bDynamicTxLowPower = false;
}
- if((priv->bDynamicTxHighPower != priv->bLastDTPFlag_High) ||
- (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low))
- {
- RT_TRACE(COMP_TXAGC,"SetTxPowerLevel8190() channel = %d \n" , priv->ieee80211->current_network.channel);
+ if ((priv->bDynamicTxHighPower != priv->bLastDTPFlag_High) ||
+ (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low)) {
+ RT_TRACE(COMP_TXAGC, "SetTxPowerLevel8190() channel = %d\n", priv->ieee80211->current_network.channel);
#if defined(RTL8190P) || defined(RTL8192E)
- SetTxPowerLevel8190(Adapter,pHalData->CurrentChannel);
+ SetTxPowerLevel8190(Adapter, pHalData->CurrentChannel);
#endif
- rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+ rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel);
/*pHalData->bStartTxCtrlByTPCNFR = FALSE; Clear th flag of Set TX Power from Sitesurvey*/
}
priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
--
2.2.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH RESEND 3/4] staging: rtl8192u: remove redundant code
2015-01-10 14:19 [PATCH RESEND 1/4] staging: rtl8192u: fix comments Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 2/4] staging: rtl8192u: fix whitespace and alignment Lorenzo Stoakes
@ 2015-01-10 14:19 ` Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 4/4] staging: rtl8192u: Refactor heavy nesting Lorenzo Stoakes
2015-01-17 22:23 ` [PATCH RESEND 1/4] staging: rtl8192u: fix comments Greg KH
3 siblings, 0 replies; 5+ messages in thread
From: Lorenzo Stoakes @ 2015-01-10 14:19 UTC (permalink / raw)
To: gregkh
Cc: anarey, mcgrof, tapaswenipathak, joe, rmfrfs, yejiayily, gdonald,
devel, linux-kernel, Lorenzo Stoakes
This patch fixes warnings/errors raised by checkpatch.pl relating to redundant
code in r8192U_dm.c.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
---
drivers/staging/rtl8192u/r8192U_dm.c | 176 +++++++++++++++++------------------
1 file changed, 84 insertions(+), 92 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 862d2ab..ed566bb 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -410,9 +410,9 @@ static void dm_check_rate_adaptive(struct net_device *dev)
ratr_value = targetRATR;
RT_TRACE(COMP_RATE, "currentRATR = %x, targetRATR = %x\n", currentRATR, targetRATR);
- if (priv->rf_type == RF_1T2R) {
+ if (priv->rf_type == RF_1T2R)
ratr_value &= ~(RATE_ALL_OFDM_2SS);
- }
+
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
@@ -440,18 +440,17 @@ static void dm_bandwidth_autoswitch(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable) {
+ if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable)
return;
- } else {
- if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
- if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
- priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
- } else { /* in force send packets in 20 Mhz in 20/40 */
- if (priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
- priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
- }
+ if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
+ if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
+ priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
+ } else { /* in force send packets in 20 Mhz in 20/40 */
+ if (priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
+ priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
}
+
} /* dm_BandwidthAutoSwitch */
/* OFDM default at 0db, index=6. */
@@ -538,9 +537,8 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
tx_cmd.Length = 4;
tx_cmd.Value = Value;
rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
- if (rtStatus == RT_STATUS_FAILURE) {
+ if (rtStatus == RT_STATUS_FAILURE)
RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
- }
mdelay(1);
/*DbgPrint("hi, vivi, strange\n");*/
for (i = 0; i <= 30; i++) {
@@ -580,9 +578,8 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
break;
}
- for (k = 0; k < 5; k++) {
+ for (k = 0; k < 5; k++)
Avg_TSSI_Meas_from_driver += tmp_report[k];
- }
Avg_TSSI_Meas_from_driver = Avg_TSSI_Meas_from_driver*100/5;
RT_TRACE(COMP_POWER_TRACKING, "Avg_TSSI_Meas_from_driver = %d\n", Avg_TSSI_Meas_from_driver);
@@ -605,56 +602,55 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
return;
- } else {
- if (Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK) {
- if (priv->rfa_txpowertrackingindex > 0) {
- priv->rfa_txpowertrackingindex--;
- if (priv->rfa_txpowertrackingindex_real > 4) {
- priv->rfa_txpowertrackingindex_real--;
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
- }
- }
- } else {
- if (priv->rfa_txpowertrackingindex < 36) {
- priv->rfa_txpowertrackingindex++;
- priv->rfa_txpowertrackingindex_real++;
+ }
+ if (Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK) {
+ if (priv->rfa_txpowertrackingindex > 0) {
+ priv->rfa_txpowertrackingindex--;
+ if (priv->rfa_txpowertrackingindex_real > 4) {
+ priv->rfa_txpowertrackingindex_real--;
rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
-
}
}
- priv->cck_present_attentuation_difference
- = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
+ } else {
+ if (priv->rfa_txpowertrackingindex < 36) {
+ priv->rfa_txpowertrackingindex++;
+ priv->rfa_txpowertrackingindex_real++;
+ rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
- if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
- priv->cck_present_attentuation
- = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
- else
- priv->cck_present_attentuation
- = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
-
- if (priv->cck_present_attentuation > -1 && priv->cck_present_attentuation < 23) {
- if (priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) {
- priv->bcck_in_ch14 = TRUE;
- dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
- } else if (priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) {
- priv->bcck_in_ch14 = FALSE;
- dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
- } else
- dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
}
- RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
- RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
- RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
- RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
+ }
+ priv->cck_present_attentuation_difference
+ = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
- if (priv->cck_present_attentuation_difference <= -12 || priv->cck_present_attentuation_difference >= 24) {
- priv->ieee80211->bdynamic_txpower_enable = TRUE;
- write_nic_byte(dev, 0x1ba, 0);
- RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
- return;
- }
+ if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+ priv->cck_present_attentuation
+ = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
+ else
+ priv->cck_present_attentuation
+ = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
+
+ if (priv->cck_present_attentuation > -1 && priv->cck_present_attentuation < 23) {
+ if (priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) {
+ priv->bcck_in_ch14 = TRUE;
+ dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+ } else if (priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) {
+ priv->bcck_in_ch14 = FALSE;
+ dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+ } else
+ dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
+ }
+ RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
+ RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
+ if (priv->cck_present_attentuation_difference <= -12 || priv->cck_present_attentuation_difference >= 24) {
+ priv->ieee80211->bdynamic_txpower_enable = TRUE;
+ write_nic_byte(dev, 0x1ba, 0);
+ RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
+ return;
}
+
write_nic_byte(dev, 0x1ba, 0);
Avg_TSSI_Meas_from_driver = 0;
for (k = 0; k < 5; k++)
@@ -1324,12 +1320,11 @@ static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
if (!priv->btxpower_tracking)
return;
- else {
- if ((tx_power_track_counter % 30 == 0) && (tx_power_track_counter != 0)) {
- queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
- }
- tx_power_track_counter++;
- }
+
+ if ((tx_power_track_counter % 30 == 0) && (tx_power_track_counter != 0))
+ queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
+
+ tx_power_track_counter++;
}
static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
@@ -1339,11 +1334,10 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
/*DbgPrint("dm_CheckTXPowerTracking()\n");*/
if (!priv->btxpower_tracking)
return;
- else {
- if (priv->txpower_count <= 2) {
- priv->txpower_count++;
- return;
- }
+
+ if (priv->txpower_count <= 2) {
+ priv->txpower_count++;
+ return;
}
if (!TM_Trigger) {
@@ -1358,11 +1352,11 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
TM_Trigger = 1;
return;
- } else {
- /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
- queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
- TM_Trigger = 0;
}
+
+ /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
+ queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
+ TM_Trigger = 0;
}
static void dm_check_txpower_tracking(struct net_device *dev)
@@ -1834,16 +1828,16 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
and then execute the step below. */
- if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh)) {
+ if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
/* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
will be reset to init value. We must prevent the condition. */
if (dm_digtable.dig_state == DM_STA_DIG_OFF &&
(priv->reset_count == reset_cnt)) {
return;
- } else {
- reset_cnt = priv->reset_count;
}
+ reset_cnt = priv->reset_count;
+
/* If DIG is off, DIG high power state must reset. */
dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
dm_digtable.dig_state = DM_STA_DIG_OFF;
@@ -1884,20 +1878,20 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/* 2. When RSSI increase, We have to judge if it is larger than a threshold
and then execute the step below. */
- if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh)) {
+ if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
u8 reset_flag = 0;
if (dm_digtable.dig_state == DM_STA_DIG_ON &&
(priv->reset_count == reset_cnt)) {
dm_ctrl_initgain_byrssi_highpwr(dev);
return;
- } else {
- if (priv->reset_count != reset_cnt)
- reset_flag = 1;
-
- reset_cnt = priv->reset_count;
}
+ if (priv->reset_count != reset_cnt)
+ reset_flag = 1;
+
+ reset_cnt = priv->reset_count;
+
dm_digtable.dig_state = DM_STA_DIG_ON;
/*DbgPrint("DIG ON\n\r");*/
@@ -1989,8 +1983,8 @@ static void dm_ctrl_initgain_byrssi_highpwr(
if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON &&
(priv->reset_count == reset_cnt_highpwr))
return;
- else
- dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
+
+ dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
/* 3.1 Higher PD_TH for OFDM for high power state. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
@@ -2006,8 +2000,8 @@ static void dm_ctrl_initgain_byrssi_highpwr(
if (dm_digtable.dig_highpwr_state == DM_STA_DIG_OFF &&
(priv->reset_count == reset_cnt_highpwr))
return;
- else
- dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
+
+ dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
@@ -2104,7 +2098,7 @@ static void dm_pd_th(
if (dm_digtable.cur_connect_state == DIG_CONNECT) {
if (dm_digtable.rssi_val >= dm_digtable.rssi_high_power_highthresh)
dm_digtable.curpd_thstate = DIG_PD_AT_HIGH_POWER;
- else if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
+ else if (dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) &&
(dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
@@ -2186,9 +2180,9 @@ static void dm_cs_ratio(
if (dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) {
if (dm_digtable.cur_connect_state == DIG_CONNECT) {
- if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
+ if (dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
- else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh))
+ else if (dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh)
dm_digtable.curcs_ratio_state = DIG_CS_RATIO_HIGHER;
else
dm_digtable.curcs_ratio_state = dm_digtable.precs_ratio_state;
@@ -3091,11 +3085,10 @@ static void dm_dynamic_txpower(struct net_device *dev)
priv->bDynamicTxHighPower = false;
/* low power state check */
- if (priv->undecorated_smoothed_pwdb < 35) {
+ if (priv->undecorated_smoothed_pwdb < 35)
priv->bDynamicTxLowPower = true;
- } else if (priv->undecorated_smoothed_pwdb >= 40) {
+ else if (priv->undecorated_smoothed_pwdb >= 40)
priv->bDynamicTxLowPower = false;
- }
}
} else {
/*pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;*/
@@ -3146,7 +3139,6 @@ static void dm_send_rssi_tofw(struct net_device *dev)
* 0x1e0(byte) to notify driver.
*/
write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
- return;
}
/*---------------------------Define function prototype------------------------*/
--
2.2.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH RESEND 4/4] staging: rtl8192u: Refactor heavy nesting
2015-01-10 14:19 [PATCH RESEND 1/4] staging: rtl8192u: fix comments Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 2/4] staging: rtl8192u: fix whitespace and alignment Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 3/4] staging: rtl8192u: remove redundant code Lorenzo Stoakes
@ 2015-01-10 14:19 ` Lorenzo Stoakes
2015-01-17 22:23 ` [PATCH RESEND 1/4] staging: rtl8192u: fix comments Greg KH
3 siblings, 0 replies; 5+ messages in thread
From: Lorenzo Stoakes @ 2015-01-10 14:19 UTC (permalink / raw)
To: gregkh
Cc: anarey, mcgrof, tapaswenipathak, joe, rmfrfs, yejiayily, gdonald,
devel, linux-kernel, Lorenzo Stoakes
This patch fixes warnings raised by checkpatch.pl relating to heavily indented
lines in r8192U_dm.c by refactoring code to achieve the same outcome indented by
one less tab.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
---
drivers/staging/rtl8192u/r8192U_dm.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index ed566bb..bae8511 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -2581,28 +2581,25 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
cck_rx_ver2_sec_index = cck_rx_ver2_max_index;
tmp_cck_max_pwdb = cur_cck_pwdb;
cck_rx_ver2_max_index = i;
- } else if (cur_cck_pwdb == tmp_cck_max_pwdb) { /* let sec and min point to the different index */
+ } else if (cur_cck_pwdb == tmp_cck_max_pwdb) {
+ /* let sec and min point to the different index */
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
} else if ((cur_cck_pwdb < tmp_cck_max_pwdb) && (cur_cck_pwdb > tmp_cck_sec_pwdb)) {
tmp_cck_sec_pwdb = cur_cck_pwdb;
cck_rx_ver2_sec_index = i;
- } else if (cur_cck_pwdb == tmp_cck_sec_pwdb) {
- if (tmp_cck_sec_pwdb == tmp_cck_min_pwdb) { /* let sec and min point to the different index */
- tmp_cck_sec_pwdb = cur_cck_pwdb;
- cck_rx_ver2_sec_index = i;
- } else {
- /* This case we don't need to set any index */
- }
+ } else if (cur_cck_pwdb == tmp_cck_sec_pwdb && tmp_cck_sec_pwdb == tmp_cck_min_pwdb) {
+ /* let sec and min point to the different index */
+ tmp_cck_sec_pwdb = cur_cck_pwdb;
+ cck_rx_ver2_sec_index = i;
+ /* otherwise we don't need to set any index */
} else if ((cur_cck_pwdb < tmp_cck_sec_pwdb) && (cur_cck_pwdb > tmp_cck_min_pwdb)) {
/* This case we don't need to set any index */
- } else if (cur_cck_pwdb == tmp_cck_min_pwdb) {
- if (tmp_cck_sec_pwdb == tmp_cck_min_pwdb) { /* let sec and min point to the different index */
- tmp_cck_min_pwdb = cur_cck_pwdb;
- cck_rx_ver2_min_index = i;
- } else {
- /* This case we don't need to set any index */
- }
+ } else if (cur_cck_pwdb == tmp_cck_min_pwdb && tmp_cck_sec_pwdb == tmp_cck_min_pwdb) {
+ /* let sec and min point to the different index */
+ tmp_cck_min_pwdb = cur_cck_pwdb;
+ cck_rx_ver2_min_index = i;
+ /* otherwise we don't need to set any index */
} else if (cur_cck_pwdb < tmp_cck_min_pwdb) {
tmp_cck_min_pwdb = cur_cck_pwdb;
cck_rx_ver2_min_index = i;
--
2.2.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND 1/4] staging: rtl8192u: fix comments
2015-01-10 14:19 [PATCH RESEND 1/4] staging: rtl8192u: fix comments Lorenzo Stoakes
` (2 preceding siblings ...)
2015-01-10 14:19 ` [PATCH RESEND 4/4] staging: rtl8192u: Refactor heavy nesting Lorenzo Stoakes
@ 2015-01-17 22:23 ` Greg KH
3 siblings, 0 replies; 5+ messages in thread
From: Greg KH @ 2015-01-17 22:23 UTC (permalink / raw)
To: Lorenzo Stoakes
Cc: devel, gdonald, tapaswenipathak, yejiayily, mcgrof, linux-kernel,
rmfrfs, joe
On Sat, Jan 10, 2015 at 02:19:11PM +0000, Lorenzo Stoakes wrote:
> This patch fixes errors raised by checkpatch.pl relating to use of C99 comments
> in r8192U_dm.c, and cleans up existing ANSI C comments.
>
> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
> ---
> drivers/staging/rtl8192u/r8192U_dm.c | 811 ++++++++++++++++++-----------------
> 1 file changed, 420 insertions(+), 391 deletions(-)
This doesn't apply against my latest staging-testing branch, so I can't
accept it. Please refresh this series against that branch and resend.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-01-17 22:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-10 14:19 [PATCH RESEND 1/4] staging: rtl8192u: fix comments Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 2/4] staging: rtl8192u: fix whitespace and alignment Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 3/4] staging: rtl8192u: remove redundant code Lorenzo Stoakes
2015-01-10 14:19 ` [PATCH RESEND 4/4] staging: rtl8192u: Refactor heavy nesting Lorenzo Stoakes
2015-01-17 22:23 ` [PATCH RESEND 1/4] staging: rtl8192u: fix comments Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).