linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Hung <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
	peter_hong@fintek.com.tw, hpeter@gmail.com,
	Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: [PATCH V8 06/10] USB: f81232: implement port enable/disable method
Date: Thu, 26 Feb 2015 18:02:12 +0800	[thread overview]
Message-ID: <1424944936-7117-7-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1424944936-7117-1-git-send-email-hpeter+linux_kernel@gmail.com>

We put FCR/IER initial step to f81232_port_enable()/f81232_port_disable().
When port is open, it set MSR interrupt on. Otherwise set it off.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
 drivers/usb/serial/f81232.c | 49 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index b70f9b9..a3f9530 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -37,6 +37,8 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define F81232_SET_REGISTER	0x40
 
 #define SERIAL_BASE_ADDRESS	0x0120
+#define INTERRUPT_ENABLE_REGISTER	(0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER	(0x02 + SERIAL_BASE_ADDRESS)
 #define MODEM_CONTROL_REGISTER	(0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER	(0x06 + SERIAL_BASE_ADDRESS)
 
@@ -344,6 +346,48 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 	 */
 }
 
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+	u8 val;
+	int status;
+
+	/* fifo on, trigger8, clear TX/RX*/
+	val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+			UART_FCR_CLEAR_XMIT;
+
+	status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set FCR: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	/* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			UART_IER_MSI);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+	int status;
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
 static void f81232_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -395,6 +439,10 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result;
 
+	result = f81232_port_enable(port);
+	if (result)
+		return result;
+
 	/* Setup termios */
 	if (tty)
 		f81232_set_termios(tty, port, NULL);
@@ -417,6 +465,7 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void f81232_close(struct usb_serial_port *port)
 {
+	f81232_port_disable(port);
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
-- 
1.9.1


  parent reply	other threads:[~2015-02-26 10:02 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26 10:02 [PATCH V8 00/10] USB: f81232: V8 patches Peter Hung
2015-02-26 10:02 ` [PATCH V8 01/10] USB: f81232: rename private struct member name Peter Hung
2015-02-26 10:02 ` [PATCH V8 02/10] USB: f81232: implement RX bulk-in EP Peter Hung
2015-03-14 11:48   ` Johan Hovold
2015-03-16  2:53     ` Peter Hung
2015-03-16  8:52       ` Johan Hovold
2015-03-16  9:15         ` Peter Hung
2015-02-26 10:02 ` [PATCH V8 03/10] USB: f81232: change lock mechanism Peter Hung
2015-02-26 10:02 ` [PATCH V8 04/10] USB: f81232: implement read IIR/MSR with endpoint Peter Hung
2015-03-14 12:02   ` Johan Hovold
2015-03-16  3:08     ` Peter Hung
2015-03-16  8:55       ` Johan Hovold
2015-03-16  9:18         ` Peter Hung
2015-02-26 10:02 ` [PATCH V8 05/10] USB: f81232: implement MCR/MSR function Peter Hung
2015-03-14 12:09   ` Johan Hovold
2015-02-26 10:02 ` Peter Hung [this message]
2015-02-26 10:02 ` [PATCH V8 07/10] USB: f81232: implement set_termios() Peter Hung
2015-03-14 12:24   ` Johan Hovold
2015-02-26 10:02 ` [PATCH V8 08/10] USB: f81232: clarify f81232_ioctl() and fix Peter Hung
2015-03-14 12:27   ` Johan Hovold
2015-02-26 10:02 ` [PATCH V8 09/10] USB: f81232: cleanup non-used define Peter Hung
2015-02-26 10:02 ` [PATCH V8 10/10] USB: f81232: modify/add author Peter Hung
2015-03-05  5:59 ` [PATCH V8 00/10] USB: f81232: V8 patches Peter Hung
2015-03-05  7:03   ` Johan Hovold
2015-03-14 12:30     ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424944936-7117-7-git-send-email-hpeter+linux_kernel@gmail.com \
    --to=hpeter@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpeter+linux_kernel@gmail.com \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter_hong@fintek.com.tw \
    --cc=tom_tsai@fintek.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).