[PATCH v2 0/7] ARM: at91/dt: kizbox: update and rename to at91-kizbox

[PATCH v2 0/7] ARM: at91/dt: kizbox: update and rename to at91-kizbox

[Gaël PORTAY]

*** BLURB HERE ***

Gaël PORTAY (7):
  ARM: at91/dt: kizbox: rename to at91-kizbox
  ARM: at91/dt: at91-kizbox: sanitize file
  ARM: at91/dt: at91-kizbox: user proper serial uart
  ARM: at91/dt: at91-kizbox: gpio-keys related changes
  ARM: at91/dt: at91-kizbox: leds related changes
  ARM: at91/dt: at91-kizbox: re-size nand partitions
  ARM: at91/dt: at91-kizbox: update chosen node

 arch/arm/boot/dts/Makefile        |   2 +-
 arch/arm/boot/dts/at91-kizbox.dts | 159 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/kizbox.dts      | 150 -----------------------------------
 3 files changed, 160 insertions(+), 151 deletions(-)
 create mode 100644 arch/arm/boot/dts/at91-kizbox.dts
 delete mode 100644 arch/arm/boot/dts/kizbox.dts

-- 
1.9.1

[PATCH v2 1/7] ARM: at91/dt: kizbox: rename to at91-kizbox

[Gaël PORTAY]

Rename to match AT91 naming convention.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/Makefile                        | 2 +-
 arch/arm/boot/dts/{kizbox.dts => at91-kizbox.dts} | 0
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename arch/arm/boot/dts/{kizbox.dts => at91-kizbox.dts} (100%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d2b559d..32568fb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -18,9 +18,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	tny_a9263.dtb \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
+	at91-kizbox.dtb \
 	at91sam9g20ek.dtb \
 	at91sam9g20ek_2mmc.dtb \
-	kizbox.dtb \
 	tny_a9g20.dtb \
 	usb_a9g20.dtb \
 	usb_a9g20_lpw.dtb \
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
similarity index 100%
rename from arch/arm/boot/dts/kizbox.dts
rename to arch/arm/boot/dts/at91-kizbox.dts
-- 
1.9.1

[PATCH v2 2/7] ARM: at91/dt: at91-kizbox: sanitize file

[Gaël PORTAY]

Consists in:
 * sorting nodes by address as possible or alphabetically,
 * adding myself as new maintainer and
 * update license.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/at91-kizbox.dts | 67 +++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index e83e4f9..00c86c1 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -1,16 +1,16 @@
 /*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
  *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
  *
- * Licensed under GPLv2.
+ * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
 
 / {
-
-	model = "Overkiz kizbox";
+	model = "Overkiz Kizbox";
 	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
 
 	chosen {
@@ -38,10 +38,6 @@
 
 	ahb {
 		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
 			usart0: serial@fffb0000 {
 				status = "okay";
 			};
@@ -57,6 +53,10 @@
 				status = "okay";
 			};
 
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
 			watchdog@fffffd40 {
 				timeout-sec = <15>;
 				atmel,max-heartbeat-sec = <16>;
@@ -65,6 +65,11 @@
 			};
 		};
 
+		usb0: ohci@00500000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
@@ -79,24 +84,36 @@
 				label = "ubi";
 				reg = <0xc0000 0x7f40000>;
 			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
+		reset {
+			label = "reset";
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
 		};
 
-		usb0: ohci@00500000 {
-			num-ports = <1>;
-			status = "okay";
+		mode {
+			label = "mode";
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
 		};
 	};
 
 	i2c@0 {
 		status = "okay";
 
-		pcf8563@51 {
-			/* nxp pcf8563 rtc */
+		rtc: pcf8563@51 {
 			compatible = "nxp,pcf8563";
 			reg = <0x51>;
 		};
-
 	};
 
 	leds {
@@ -127,24 +144,4 @@
 			linux,default-trigger = "none";
 		};
 	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "reset";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
-		};
-
-		mode {
-			label = "mode";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-			gpio-key,wakeup;
-		};
-	};
 };
-- 
1.9.1

Re: [PATCH v2 2/7] ARM: at91/dt: at91-kizbox: sanitize file

[Alexandre Belloni]

On 21/04/2015 at 14:05:13 +0200, Gaël PORTAY wrote :
> Consists in:
>  * sorting nodes by address as possible or alphabetically,
>  * adding myself as new maintainer and
>  * update license.
> 
> Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
> ---
>  arch/arm/boot/dts/at91-kizbox.dts | 67 +++++++++++++++++++--------------------
>  1 file changed, 32 insertions(+), 35 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index e83e4f9..00c86c1 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -1,16 +1,16 @@
>  /*
> - * kizbox.dts - Device Tree file for Overkiz Kizbox board
> + * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
>   *

My guess is that this should be part of the previous patch


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH v2 2/7] ARM: at91/dt: at91-kizbox: sanitize file

[Gaël PORTAY]

On 29/04/2015 01:34, Alexandre Belloni wrote:
> On 21/04/2015 at 14:05:13 +0200, Gaël PORTAY wrote :
>> Consists in:
>>   * sorting nodes by address as possible or alphabetically,
>>   * adding myself as new maintainer and
>>   * update license.
>>
>> Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
>> ---
>>   arch/arm/boot/dts/at91-kizbox.dts | 67 +++++++++++++++++++--------------------
>>   1 file changed, 32 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
>> index e83e4f9..00c86c1 100644
>> --- a/arch/arm/boot/dts/at91-kizbox.dts
>> +++ b/arch/arm/boot/dts/at91-kizbox.dts
>> @@ -1,16 +1,16 @@
>>   /*
>> - * kizbox.dts - Device Tree file for Overkiz Kizbox board
>> + * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
>>    *
> My guess is that this should be part of the previous patch
Indeed...

[PATCH v2 3/7] ARM: at91/dt: at91-kizbox: user proper serial uart

[Gaël PORTAY]

USART3 is the only serial UART accessible.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/at91-kizbox.dts | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 00c86c1..72d5de80 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -38,14 +38,6 @@
 
 	ahb {
 		apb {
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
 			macb0: ethernet@fffc4000 {
 				phy-mode = "mii";
 				pinctrl-0 = <&pinctrl_macb_rmii
@@ -53,6 +45,10 @@
 				status = "okay";
 			};
 
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
-- 
1.9.1

[PATCH v2 4/7] ARM: at91/dt: at91-kizbox: gpio-keys related changes

[Gaël PORTAY]

This:
 * fixes active level of GPIO (active high) and
 * renames buttons:
   - reset (PB_RST), and
   - mode to user (PB_USER).

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/at91-kizbox.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 72d5de80..73e4559 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -89,15 +89,15 @@
 		#size-cells = <0>;
 
 		reset {
-			label = "reset";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
 			gpio-key,wakeup;
 		};
 
-		mode {
-			label = "mode";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+		user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
 			gpio-key,wakeup;
 		};
-- 
1.9.1

[PATCH v2 5/7] ARM: at91/dt: at91-kizbox: leds related changes

[Gaël PORTAY]

This:
 * moves to pwm-leds using tcb-pwm driver and
 * renames leds to pwm:<color>:<function>.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/at91-kizbox.dts | 53 +++++++++++++++++++++++++--------------
 1 file changed, 34 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 73e4559..b19f568 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Overkiz Kizbox";
@@ -112,32 +113,46 @@
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
+	pwm_leds {
+		compatible = "pwm-leds";
 
-		led1g {
-			label = "led1:green";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
+		network_green {
+			label = "pwm:green:network";
+			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
 		};
 
-		led1r {
-			label = "led1:red";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
+		network_red {
+			label = "pwm:red:network";
+			pwms = <&tcb_pwm 3 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
 		};
 
-		led2g {
-			label = "led2:green";
-			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
+		user_green {
+			label = "pwm:green:user";
+			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
 		};
 
-		led2r {
-			label = "led2:red";
-			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
+		user_red {
+			label = "pwm:red:user";
+			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
 		};
 	};
+
+	tcb_pwm: pwm {
+		compatible = "atmel,tcb-pwm";
+		#pwm-cells = <3>;
+		tc-block = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0
+			     &pinctrl_tcb1_tioa1
+			     &pinctrl_tcb1_tioa2
+			     &pinctrl_tcb1_tiob0>;
+	};
 };
-- 
1.9.1

[PATCH v2 6/7] ARM: at91/dt: at91-kizbox: re-size nand partitions

[Gaël PORTAY]

Re-size NAND partitions since the bootstrap is able to read volumes from an
UBI image.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/at91-kizbox.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index b19f568..e739104 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -72,14 +72,14 @@
 			nand-ecc-mode = "soft";
 			status = "okay";
 
-			bootloaderkernel@0 {
-				label = "bootloader-kernel";
-				reg = <0x0 0xc0000>;
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
 			};
 
-			ubi@c0000 {
+			ubi@20000 {
 				label = "ubi";
-				reg = <0xc0000 0x7f40000>;
+				reg = <0x20000 0x7fe0000>;
 			};
 		};
 	};
-- 
1.9.1

[PATCH v2 7/7] ARM: at91/dt: at91-kizbox: update chosen node

[Gaël PORTAY]

Simplify the bootargs since the platform is booting from an initramfs and
set the kernel stdout path to DBGU.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
 arch/arm/boot/dts/at91-kizbox.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index e739104..b567b5f 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -15,7 +15,8 @@
 	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
+		bootargs = "ubi.mtd=ubi";
+		linux,stdout-path = &dbgu;
 	};
 
 	memory {
-- 
1.9.1

Re: [PATCH v2 0/7] ARM: at91/dt: kizbox: update and rename to at91-kizbox

[Boris Brezillon]

On Tue, 21 Apr 2015 14:05:11 +0200
Gaël PORTAY <g.portay@overkiz.com> wrote:

> *** BLURB HERE ***
We usually replace this line by a description ;-).

Anyway, to the whole series:

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> 
> Gaël PORTAY (7):
>   ARM: at91/dt: kizbox: rename to at91-kizbox
>   ARM: at91/dt: at91-kizbox: sanitize file
>   ARM: at91/dt: at91-kizbox: user proper serial uart
>   ARM: at91/dt: at91-kizbox: gpio-keys related changes
>   ARM: at91/dt: at91-kizbox: leds related changes
>   ARM: at91/dt: at91-kizbox: re-size nand partitions
>   ARM: at91/dt: at91-kizbox: update chosen node
> 
>  arch/arm/boot/dts/Makefile        |   2 +-
>  arch/arm/boot/dts/at91-kizbox.dts | 159 ++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/kizbox.dts      | 150 -----------------------------------
>  3 files changed, 160 insertions(+), 151 deletions(-)
>  create mode 100644 arch/arm/boot/dts/at91-kizbox.dts
>  delete mode 100644 arch/arm/boot/dts/kizbox.dts
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH v2 0/7] ARM: at91/dt: kizbox: update and rename to at91-kizbox

[g.portay]

On 2015-04-28 21:34, Boris Brezillon wrote:
> On Tue, 21 Apr 2015 14:05:11 +0200
> Gaël PORTAY <g.portay@overkiz.com> wrote:
> 
>> *** BLURB HERE ***
> We usually replace this line by a description ;-).
> 

'cause I got nothing to tell... and I like to let it be known :D

> Anyway, to the whole series:
> 
> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> 

Thanks

>> 
>> Gaël PORTAY (7):
>>   ARM: at91/dt: kizbox: rename to at91-kizbox
>>   ARM: at91/dt: at91-kizbox: sanitize file
>>   ARM: at91/dt: at91-kizbox: user proper serial uart
>>   ARM: at91/dt: at91-kizbox: gpio-keys related changes
>>   ARM: at91/dt: at91-kizbox: leds related changes
>>   ARM: at91/dt: at91-kizbox: re-size nand partitions
>>   ARM: at91/dt: at91-kizbox: update chosen node
>> 
>>  arch/arm/boot/dts/Makefile        |   2 +-
>>  arch/arm/boot/dts/at91-kizbox.dts | 159 
>> ++++++++++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/kizbox.dts      | 150 
>> -----------------------------------
>>  3 files changed, 160 insertions(+), 151 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/at91-kizbox.dts
>>  delete mode 100644 arch/arm/boot/dts/kizbox.dts
>> 

By the way...

*$ cat 0001-ARM-at91-dt-kizbox-rename-to-at91-kizbox.patch~*
 From 9c0af17907451f8424b29c081780a9e9c18ae19d Mon Sep 17 00:00:00 2001
 From: =?utf-8?q?Ga=C3=ABl=20PORTAY?= <g.portay@overkiz.com>
Date: Tue, 21 Apr 2015 12:08:42 +0200
Subject: [PATCH v2 1/7] ARM: at91/dt: kizbox: rename to at91-kizbox
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit

Hi,

This patchset renames the kizbox board into at91-kizbox to match AT91 
naming
convention, sanitize and sorts nodes by address when possible (or
alphabeticallyi if not applicable).

It also updates the following features:
- uses proper serial uart (only USART3 is accessible),
- fixes gpio-keys active level and rename,
- moves leds to pwm support (using tcb-pwm driver) and rename as well,
- re-sizes nand mtd partitions and
- updates chosen-node (bootargs + set linux stdout path to DBGU),

Regards,
Gaël PORTAY

Changes since v1:
- Split into patches for review

---
  arch/arm/boot/dts/Makefile                        | 2 +-
  arch/arm/boot/dts/{kizbox.dts => at91-kizbox.dts} | 0
  2 files changed, 1 insertion(+), 1 deletion(-)
  rename arch/arm/boot/dts/{kizbox.dts => at91-kizbox.dts} (100%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d2b559d..32568fb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -18,9 +18,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
  	tny_a9263.dtb \
  	usb_a9263.dtb \
  	at91-foxg20.dtb \
+	at91-kizbox.dtb \
  	at91sam9g20ek.dtb \
  	at91sam9g20ek_2mmc.dtb \
-	kizbox.dtb \
  	tny_a9g20.dtb \
  	usb_a9g20.dtb \
  	usb_a9g20_lpw.dtb \
diff --git a/arch/arm/boot/dts/kizbox.dts 
b/arch/arm/boot/dts/at91-kizbox.dts
similarity index 100%
rename from arch/arm/boot/dts/kizbox.dts
rename to arch/arm/boot/dts/at91-kizbox.dts
-- 
1.9.1



PS: Or blurb because I ate too many fondues before the winter comes to 
an end ;)