* [PATCH 0/6] Remove redundant spi driver bus initialization
@ 2015-06-23 14:45 Antonio Borneo
2015-06-23 14:49 ` [PATCH 1/6] ASoC: wm0010: " Antonio Borneo
` (5 more replies)
0 siblings, 6 replies; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:45 UTC (permalink / raw)
To: Alan Ott, Alexander Aring, alsa-devel, Andrzej Hajda, devel,
Greg Kroah-Hartman, Jaroslav Kysela, Jonathan Cameron,
Kalle Valo, Karol Wrona, Kyungmin Park, Lars-Peter Clausen,
Liam Girdwood, linux-iio, linux-media, linux-wireless,
linux-wpan, Mark Brown, Mauro Carvalho Chehab, netdev, patches,
Solomon Peachy, Takashi Iwai, Varka Bhadram
Cc: Antonio Borneo, linux-kernel
This cleanup was already completed between end 2011 and early 2012
with a patch series from Lars-Peter Clausen:
https://lkml.org/lkml/2011/11/24/190
Later on new redundant initialization re-appeared here and there.
Time to cleanup again.
And, yes, I'm lazy! I copy-paste the exact same commit message from
Lars-Peter; only minor reformat to stay in 75 char/line and fix the
name of spi_register_driver().
Regards,
Antonio
Antonio Borneo (6):
ASoC: wm0010: Remove redundant spi driver bus initialization
iio: ssp_sensors: Remove redundant spi driver bus initialization
staging: mt29f_spinand: Remove redundant spi driver bus initialization
net: ieee802154: Remove redundant spi driver bus initialization
wireless: cw1200: Remove redundant spi driver bus initialization
[media] s5c73m3: Remove redundant spi driver bus initialization
drivers/iio/common/ssp_sensors/ssp_dev.c | 1 -
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 1 -
drivers/net/ieee802154/cc2520.c | 1 -
drivers/net/ieee802154/mrf24j40.c | 1 -
drivers/net/wireless/cw1200/cw1200_spi.c | 1 -
drivers/staging/mt29f_spinand/mt29f_spinand.c | 1 -
sound/soc/codecs/wm0010.c | 1 -
7 files changed, 7 deletions(-)
--
2.4.4
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/6] ASoC: wm0010: Remove redundant spi driver bus initialization
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
@ 2015-06-23 14:49 ` Antonio Borneo
2015-06-23 14:52 ` [PATCH 2/6] iio: ssp_sensors: " Antonio Borneo
` (4 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:49 UTC (permalink / raw)
Cc: Antonio Borneo, linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Jaroslav Kysela <perex@perex.cz>
To: Takashi Iwai <tiwai@suse.de>
To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: alsa-devel@alsa-project.org
To: patches@opensource.wolfsonmicro.com
Cc: linux-kernel@vger.kernel.org
---
sound/soc/codecs/wm0010.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/codecs/wm0010.c b/sound/soc/codecs/wm0010.c
index f37989e..61bfff4 100644
--- a/sound/soc/codecs/wm0010.c
+++ b/sound/soc/codecs/wm0010.c
@@ -1005,7 +1005,6 @@ static int wm0010_spi_remove(struct spi_device *spi)
static struct spi_driver wm0010_spi_driver = {
.driver = {
.name = "wm0010",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm0010_spi_probe,
--
2.4.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/6] iio: ssp_sensors: Remove redundant spi driver bus initialization
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
2015-06-23 14:49 ` [PATCH 1/6] ASoC: wm0010: " Antonio Borneo
@ 2015-06-23 14:52 ` Antonio Borneo
2015-06-29 10:05 ` Karol Wrona
2015-06-23 14:52 ` [PATCH 3/6] staging: mt29f_spinand: " Antonio Borneo
` (3 subsequent siblings)
5 siblings, 1 reply; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:52 UTC (permalink / raw)
To: Jonathan Cameron, Lars-Peter Clausen, Karol Wrona, linux-iio
Cc: Antonio Borneo, linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
To: Karol Wrona <k.wrona@samsung.com>
To: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/iio/common/ssp_sensors/ssp_dev.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index 9a40097..d338bb5 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -700,7 +700,6 @@ static struct spi_driver ssp_driver = {
.remove = ssp_remove,
.driver = {
.pm = &ssp_pm_ops,
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ssp_of_match),
.name = "sensorhub"
--
2.4.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/6] staging: mt29f_spinand: Remove redundant spi driver bus initialization
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
2015-06-23 14:49 ` [PATCH 1/6] ASoC: wm0010: " Antonio Borneo
2015-06-23 14:52 ` [PATCH 2/6] iio: ssp_sensors: " Antonio Borneo
@ 2015-06-23 14:52 ` Antonio Borneo
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
` (2 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:52 UTC (permalink / raw)
To: Greg Kroah-Hartman, devel; +Cc: Antonio Borneo, linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
---
drivers/staging/mt29f_spinand/mt29f_spinand.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
index 7285c64..ad30ce4 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.c
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -948,7 +948,6 @@ static const struct of_device_id spinand_dt[] = {
static struct spi_driver spinand_driver = {
.driver = {
.name = "mt29f",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.of_match_table = spinand_dt,
},
--
2.4.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/6] net: ieee802154: Remove redundant spi driver bus initialization
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
` (2 preceding siblings ...)
2015-06-23 14:52 ` [PATCH 3/6] staging: mt29f_spinand: " Antonio Borneo
@ 2015-06-23 14:52 ` Antonio Borneo
2015-06-23 15:06 ` Varka Bhadram
` (3 more replies)
2015-06-23 14:53 ` [PATCH 5/6] wireless: cw1200: " Antonio Borneo
2015-06-23 14:53 ` [PATCH 6/6] [media] s5c73m3: " Antonio Borneo
5 siblings, 4 replies; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:52 UTC (permalink / raw)
To: Alan Ott, Alexander Aring, Varka Bhadram, linux-wpan, netdev
Cc: Antonio Borneo, linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Alan Ott <alan@signal11.us>
To: Alexander Aring <alex.aring@gmail.com>
To: Varka Bhadram <varkabhadram@gmail.com>
To: linux-wpan@vger.kernel.org
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ieee802154/cc2520.c | 1 -
drivers/net/ieee802154/mrf24j40.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index f833b8b..bd957f1 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -1046,7 +1046,6 @@ MODULE_DEVICE_TABLE(of, cc2520_of_ids);
static struct spi_driver cc2520_driver = {
.driver = {
.name = "cc2520",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(cc2520_of_ids),
},
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index fba2dfd..bc8fb26 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -812,7 +812,6 @@ MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
static struct spi_driver mrf24j40_driver = {
.driver = {
.name = "mrf24j40",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.id_table = mrf24j40_ids,
--
2.4.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/6] wireless: cw1200: Remove redundant spi driver bus initialization
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
` (3 preceding siblings ...)
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
@ 2015-06-23 14:53 ` Antonio Borneo
2015-07-21 13:44 ` [5/6] " Kalle Valo
2015-06-23 14:53 ` [PATCH 6/6] [media] s5c73m3: " Antonio Borneo
5 siblings, 1 reply; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:53 UTC (permalink / raw)
To: Solomon Peachy, Kalle Valo, linux-wireless, netdev
Cc: Antonio Borneo, linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Solomon Peachy <pizza@shaftnet.org>
To: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/wireless/cw1200/cw1200_spi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c
index 7603546..29185ae 100644
--- a/drivers/net/wireless/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/cw1200/cw1200_spi.c
@@ -467,7 +467,6 @@ static struct spi_driver spi_driver = {
.remove = cw1200_spi_disconnect,
.driver = {
.name = "cw1200_wlan_spi",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &cw1200_pm_ops,
--
2.4.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 6/6] [media] s5c73m3: Remove redundant spi driver bus initialization
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
` (4 preceding siblings ...)
2015-06-23 14:53 ` [PATCH 5/6] wireless: cw1200: " Antonio Borneo
@ 2015-06-23 14:53 ` Antonio Borneo
2015-06-24 5:53 ` Andrzej Hajda
5 siblings, 1 reply; 15+ messages in thread
From: Antonio Borneo @ 2015-06-23 14:53 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Kyungmin Park, Andrzej Hajda, linux-media
Cc: Antonio Borneo, linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
To: Kyungmin Park <kyungmin.park@samsung.com>
To: Andrzej Hajda <a.hajda@samsung.com>
To: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
index 63eb190..fa4a5eb 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
@@ -149,7 +149,6 @@ int s5c73m3_register_spi_driver(struct s5c73m3 *state)
spidrv->remove = s5c73m3_spi_remove;
spidrv->probe = s5c73m3_spi_probe;
spidrv->driver.name = S5C73M3_SPI_DRV_NAME;
- spidrv->driver.bus = &spi_bus_type;
spidrv->driver.owner = THIS_MODULE;
spidrv->driver.of_match_table = s5c73m3_spi_ids;
--
2.4.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 4/6] net: ieee802154: Remove redundant spi driver bus initialization
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
@ 2015-06-23 15:06 ` Varka Bhadram
2015-06-23 15:08 ` Alan Ott
` (2 subsequent siblings)
3 siblings, 0 replies; 15+ messages in thread
From: Varka Bhadram @ 2015-06-23 15:06 UTC (permalink / raw)
To: Antonio Borneo, Alan Ott, Alexander Aring, linux-wpan, netdev
Cc: linux-kernel
Hi Antonio Borneo,
On Tuesday 23 June 2015 08:22 PM, Antonio Borneo wrote:
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> To: Alan Ott <alan@signal11.us>
> To: Alexander Aring <alex.aring@gmail.com>
> To: Varka Bhadram <varkabhadram@gmail.com>
> To: linux-wpan@vger.kernel.org
> To: netdev@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/net/ieee802154/cc2520.c | 1 -
> drivers/net/ieee802154/mrf24j40.c | 1 -
> 2 files changed, 2 deletions(-)
>
> diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
> index f833b8b..bd957f1 100644
> --- a/drivers/net/ieee802154/cc2520.c
> +++ b/drivers/net/ieee802154/cc2520.c
> @@ -1046,7 +1046,6 @@ MODULE_DEVICE_TABLE(of, cc2520_of_ids);
> static struct spi_driver cc2520_driver = {
> .driver = {
> .name = "cc2520",
> - .bus = &spi_bus_type,
> .owner = THIS_MODULE,
> .of_match_table = of_match_ptr(cc2520_of_ids),
> },
Acked-by: Varka Bhadram <varkabhadram@gmail.com>
> diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
> index fba2dfd..bc8fb26 100644
> --- a/drivers/net/ieee802154/mrf24j40.c
> +++ b/drivers/net/ieee802154/mrf24j40.c
> @@ -812,7 +812,6 @@ MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
> static struct spi_driver mrf24j40_driver = {
> .driver = {
> .name = "mrf24j40",
> - .bus = &spi_bus_type,
> .owner = THIS_MODULE,
> },
> .id_table = mrf24j40_ids,
--
Best regards,
Varka Bhadram.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/6] net: ieee802154: Remove redundant spi driver bus initialization
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
2015-06-23 15:06 ` Varka Bhadram
@ 2015-06-23 15:08 ` Alan Ott
2015-07-13 17:29 ` Alexander Aring
2015-07-14 5:07 ` Marcel Holtmann
3 siblings, 0 replies; 15+ messages in thread
From: Alan Ott @ 2015-06-23 15:08 UTC (permalink / raw)
To: Antonio Borneo, Alexander Aring, Varka Bhadram, linux-wpan, netdev
Cc: linux-kernel
On 06/23/2015 10:52 AM, Antonio Borneo wrote:
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> To: Alan Ott <alan@signal11.us>
> To: Alexander Aring <alex.aring@gmail.com>
> To: Varka Bhadram <varkabhadram@gmail.com>
> To: linux-wpan@vger.kernel.org
> To: netdev@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/net/ieee802154/cc2520.c | 1 -
> drivers/net/ieee802154/mrf24j40.c | 1 -
> 2 files changed, 2 deletions(-)
>
> diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
> index f833b8b..bd957f1 100644
> --- a/drivers/net/ieee802154/cc2520.c
> +++ b/drivers/net/ieee802154/cc2520.c
> @@ -1046,7 +1046,6 @@ MODULE_DEVICE_TABLE(of, cc2520_of_ids);
> static struct spi_driver cc2520_driver = {
> .driver = {
> .name = "cc2520",
> - .bus = &spi_bus_type,
> .owner = THIS_MODULE,
> .of_match_table = of_match_ptr(cc2520_of_ids),
> },
> diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
> index fba2dfd..bc8fb26 100644
> --- a/drivers/net/ieee802154/mrf24j40.c
> +++ b/drivers/net/ieee802154/mrf24j40.c
> @@ -812,7 +812,6 @@ MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
> static struct spi_driver mrf24j40_driver = {
> .driver = {
> .name = "mrf24j40",
> - .bus = &spi_bus_type,
> .owner = THIS_MODULE,
> },
> .id_table = mrf24j40_ids,
Acked-by: Alan Ott <alan@signal11.us>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 6/6] [media] s5c73m3: Remove redundant spi driver bus initialization
2015-06-23 14:53 ` [PATCH 6/6] [media] s5c73m3: " Antonio Borneo
@ 2015-06-24 5:53 ` Andrzej Hajda
0 siblings, 0 replies; 15+ messages in thread
From: Andrzej Hajda @ 2015-06-24 5:53 UTC (permalink / raw)
To: Antonio Borneo, Mauro Carvalho Chehab, Kyungmin Park, linux-media
Cc: linux-kernel
On 06/23/2015 04:53 PM, Antonio Borneo wrote:
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> To: Kyungmin Park <kyungmin.park@samsung.com>
> To: Andrzej Hajda <a.hajda@samsung.com>
> To: linux-media@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Regards
Andrzej
> ---
> drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
> index 63eb190..fa4a5eb 100644
> --- a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
> +++ b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
> @@ -149,7 +149,6 @@ int s5c73m3_register_spi_driver(struct s5c73m3 *state)
> spidrv->remove = s5c73m3_spi_remove;
> spidrv->probe = s5c73m3_spi_probe;
> spidrv->driver.name = S5C73M3_SPI_DRV_NAME;
> - spidrv->driver.bus = &spi_bus_type;
> spidrv->driver.owner = THIS_MODULE;
> spidrv->driver.of_match_table = s5c73m3_spi_ids;
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] iio: ssp_sensors: Remove redundant spi driver bus initialization
2015-06-23 14:52 ` [PATCH 2/6] iio: ssp_sensors: " Antonio Borneo
@ 2015-06-29 10:05 ` Karol Wrona
2015-07-05 13:07 ` Jonathan Cameron
0 siblings, 1 reply; 15+ messages in thread
From: Karol Wrona @ 2015-06-29 10:05 UTC (permalink / raw)
To: Antonio Borneo, Jonathan Cameron, Lars-Peter Clausen, linux-iio
Cc: linux-kernel
On 06/23/2015 04:52 PM, Antonio Borneo wrote:
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> To: Jonathan Cameron <jic23@kernel.org>
> To: Lars-Peter Clausen <lars@metafoo.de>
> To: Karol Wrona <k.wrona@samsung.com>
> To: linux-iio@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/iio/common/ssp_sensors/ssp_dev.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
> index 9a40097..d338bb5 100644
> --- a/drivers/iio/common/ssp_sensors/ssp_dev.c
> +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
> @@ -700,7 +700,6 @@ static struct spi_driver ssp_driver = {
> .remove = ssp_remove,
> .driver = {
> .pm = &ssp_pm_ops,
> - .bus = &spi_bus_type,
> .owner = THIS_MODULE,
> .of_match_table = of_match_ptr(ssp_of_match),
> .name = "sensorhub"
>
Acked-by: Karol Wrona <k.wrona@samsung.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] iio: ssp_sensors: Remove redundant spi driver bus initialization
2015-06-29 10:05 ` Karol Wrona
@ 2015-07-05 13:07 ` Jonathan Cameron
0 siblings, 0 replies; 15+ messages in thread
From: Jonathan Cameron @ 2015-07-05 13:07 UTC (permalink / raw)
To: Karol Wrona, Antonio Borneo, Lars-Peter Clausen, linux-iio; +Cc: linux-kernel
On 29/06/15 11:05, Karol Wrona wrote:
> On 06/23/2015 04:52 PM, Antonio Borneo wrote:
>> In ancient times it was necessary to manually initialize the bus
>> field of an spi_driver to spi_bus_type. These days this is done in
>> spi_register_driver(), so we can drop the manual assignment.
>>
>> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
>> To: Jonathan Cameron <jic23@kernel.org>
>> To: Lars-Peter Clausen <lars@metafoo.de>
>> To: Karol Wrona <k.wrona@samsung.com>
>> To: linux-iio@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> drivers/iio/common/ssp_sensors/ssp_dev.c | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
>> index 9a40097..d338bb5 100644
>> --- a/drivers/iio/common/ssp_sensors/ssp_dev.c
>> +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
>> @@ -700,7 +700,6 @@ static struct spi_driver ssp_driver = {
>> .remove = ssp_remove,
>> .driver = {
>> .pm = &ssp_pm_ops,
>> - .bus = &spi_bus_type,
>> .owner = THIS_MODULE,
>> .of_match_table = of_match_ptr(ssp_of_match),
>> .name = "sensorhub"
>>
> Acked-by: Karol Wrona <k.wrona@samsung.com>
Applied to the togreg branch of iio.git
Thanks,
J
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/6] net: ieee802154: Remove redundant spi driver bus initialization
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
2015-06-23 15:06 ` Varka Bhadram
2015-06-23 15:08 ` Alan Ott
@ 2015-07-13 17:29 ` Alexander Aring
2015-07-14 5:07 ` Marcel Holtmann
3 siblings, 0 replies; 15+ messages in thread
From: Alexander Aring @ 2015-07-13 17:29 UTC (permalink / raw)
To: Antonio Borneo
Cc: Alan Ott, Varka Bhadram, linux-wpan, netdev, linux-kernel, marcel
On Tue, Jun 23, 2015 at 10:52:52PM +0800, Antonio Borneo wrote:
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
Marcel,
I don't see this patch in any linux-next, net-next, bluetooth-next tree.
Could you please apply this patch with the acks by Alan and Varka?
- Alex
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/6] net: ieee802154: Remove redundant spi driver bus initialization
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
` (2 preceding siblings ...)
2015-07-13 17:29 ` Alexander Aring
@ 2015-07-14 5:07 ` Marcel Holtmann
3 siblings, 0 replies; 15+ messages in thread
From: Marcel Holtmann @ 2015-07-14 5:07 UTC (permalink / raw)
To: Antonio Borneo
Cc: Alan Ott, Alexander Aring, Varka Bhadram, linux-wpan, netdev,
linux-kernel
Hi Antonio,
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> To: Alan Ott <alan@signal11.us>
> To: Alexander Aring <alex.aring@gmail.com>
> To: Varka Bhadram <varkabhadram@gmail.com>
> To: linux-wpan@vger.kernel.org
> To: netdev@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/net/ieee802154/cc2520.c | 1 -
> drivers/net/ieee802154/mrf24j40.c | 1 -
> 2 files changed, 2 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [5/6] wireless: cw1200: Remove redundant spi driver bus initialization
2015-06-23 14:53 ` [PATCH 5/6] wireless: cw1200: " Antonio Borneo
@ 2015-07-21 13:44 ` Kalle Valo
0 siblings, 0 replies; 15+ messages in thread
From: Kalle Valo @ 2015-07-21 13:44 UTC (permalink / raw)
To: Antonio Borneo
Cc: Solomon Peachy, linux-wireless, netdev, Antonio Borneo, linux-kernel
> In ancient times it was necessary to manually initialize the bus
> field of an spi_driver to spi_bus_type. These days this is done in
> spi_register_driver(), so we can drop the manual assignment.
>
> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
> To: Solomon Peachy <pizza@shaftnet.org>
> To: Kalle Valo <kvalo@codeaurora.org>
> To: linux-wireless@vger.kernel.org
> To: netdev@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
Thanks, applied to wireless-drivers-next.git.
Kalle Valo
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-07-21 13:44 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-23 14:45 [PATCH 0/6] Remove redundant spi driver bus initialization Antonio Borneo
2015-06-23 14:49 ` [PATCH 1/6] ASoC: wm0010: " Antonio Borneo
2015-06-23 14:52 ` [PATCH 2/6] iio: ssp_sensors: " Antonio Borneo
2015-06-29 10:05 ` Karol Wrona
2015-07-05 13:07 ` Jonathan Cameron
2015-06-23 14:52 ` [PATCH 3/6] staging: mt29f_spinand: " Antonio Borneo
2015-06-23 14:52 ` [PATCH 4/6] net: ieee802154: " Antonio Borneo
2015-06-23 15:06 ` Varka Bhadram
2015-06-23 15:08 ` Alan Ott
2015-07-13 17:29 ` Alexander Aring
2015-07-14 5:07 ` Marcel Holtmann
2015-06-23 14:53 ` [PATCH 5/6] wireless: cw1200: " Antonio Borneo
2015-07-21 13:44 ` [5/6] " Kalle Valo
2015-06-23 14:53 ` [PATCH 6/6] [media] s5c73m3: " Antonio Borneo
2015-06-24 5:53 ` Andrzej Hajda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).