* [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-23 15:50 [PATCH 0/4] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
@ 2015-06-23 15:50 ` Andrew Andrianov
2015-06-23 16:11 ` Russell King - ARM Linux
2015-06-24 2:15 ` Rob Herring
2015-06-23 15:50 ` [PATCH 2/4] of: Add vendor prefix for RC Module Andrew Andrianov
` (2 subsequent siblings)
3 siblings, 2 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-23 15:50 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Arnd Bergmann, Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
This patch adds basic support for RC Module's
K1879XB1YA SoC.
K1879XB1YA is a hybrid SoC with one ARM1176JZF-S
core running linux and one NeuroMatrix DSP core.
http://www.module.ru/en/catalog/micro/mikroshema_dekodera_cifrovogo_televizionnogo_signala_sbis_k1879hb1ya/
http://www.module.ru/en/catalog/micro/micro_pc/
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
arch/arm/Kconfig | 18 +++
arch/arm/Kconfig.debug | 5 +-
arch/arm/Makefile | 1 +
arch/arm/mach-rcm-k1879xb1/Kconfig | 0
arch/arm/mach-rcm-k1879xb1/Makefile | 2 +
arch/arm/mach-rcm-k1879xb1/Makefile.boot | 4 +
arch/arm/mach-rcm-k1879xb1/board-dt.c | 152 +++++++++++++++++++++
arch/arm/mach-rcm-k1879xb1/cpuidle.c | 48 +++++++
arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h | 75 ++++++++++
.../mach-rcm-k1879xb1/include/mach/uncompress.h | 54 ++++++++
10 files changed, 358 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-rcm-k1879xb1/Kconfig
create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile
create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile.boot
create mode 100644 arch/arm/mach-rcm-k1879xb1/board-dt.c
create mode 100644 arch/arm/mach-rcm-k1879xb1/cpuidle.c
create mode 100644 arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
create mode 100644 arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 45df48b..2de4d2a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -619,6 +619,24 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+config ARCH_RCM_K1879XB1
+ bool "RC Module K1879XB1YA"
+ depends on MMU
+ select CPU_V6
+ select ARM_AMBA
+ select ARM_VIC
+ select SPARSE_IRQ
+ select GENERIC_GPIO
+ select COMMON_CLK
+ select USB_ARCH_HAS_EHCI
+ select USB_ARCH_HAS_OHCI
+ select ARCH_REQUIRE_GPIOLIB
+ select NEED_MACH_GPIO_H
+ select GENERIC_CLOCKEVENTS
+ select CLKSRC_ARM_DIT
+ help
+ Support for RC Module's K1879X SoCs
+
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0c12ffb..48ee54c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1318,7 +1318,8 @@ config DEBUG_UART_8250
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
ARCH_IOP33X || ARCH_IXP4XX || \
- ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
+ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC || \
+ ARCH_RCM_K1879XB1
# Compatibility options for BCM63xx
config DEBUG_UART_BCM63XX
@@ -1417,6 +1418,7 @@ config DEBUG_UART_PHYS
default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfffe8600 if DEBUG_UART_BCM63XX
default 0xfffff700 if ARCH_IOP33X
+ default 0x2002b000 if ARCH_RCM_K1879XB1
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
@@ -1511,6 +1513,7 @@ config DEBUG_UART_VIRT
default 0xfefff700 if ARCH_IOP33X
default 0xff003000 if DEBUG_U300_UART
default 0xffd01000 if DEBUG_HIP01_UART
+ default 0xf802b000 if ARCH_RCM_K1879XB1
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 985227c..9beb65f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -184,6 +184,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1
machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
diff --git a/arch/arm/mach-rcm-k1879xb1/Kconfig b/arch/arm/mach-rcm-k1879xb1/Kconfig
new file mode 100644
index 0000000..e69de29
diff --git a/arch/arm/mach-rcm-k1879xb1/Makefile b/arch/arm/mach-rcm-k1879xb1/Makefile
new file mode 100644
index 0000000..324af07
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/Makefile
@@ -0,0 +1,2 @@
+obj-y += board-dt.o cpuidle.o
+
diff --git a/arch/arm/mach-rcm-k1879xb1/Makefile.boot b/arch/arm/mach-rcm-k1879xb1/Makefile.boot
new file mode 100644
index 0000000..4075590
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x40008000
+params_phys-y := 0x40000100
+initrd_phys-y := 0x40800000
+
diff --git a/arch/arm/mach-rcm-k1879xb1/board-dt.c b/arch/arm/mach-rcm-k1879xb1/board-dt.c
new file mode 100644
index 0000000..00084ad
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/board-dt.c
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-rcm-k1879/board-dt.c
+ *
+ * Copyright (C) 2011-2015 RC Module
+ *
+ * Sergey Mironov <ierton@gmail.com>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+
+static struct map_desc k1879_io_desc[] __initdata = {
+ {
+ .virtual = RCM_K1879_AREA0_VIRT_BASE,
+ .pfn = __phys_to_pfn(RCM_K1879_AREA0_PHYS_BASE),
+ .length = RCM_K1879_AREA0_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = RCM_K1879_AREA1_VIRT_BASE,
+ .pfn = __phys_to_pfn(RCM_K1879_AREA1_PHYS_BASE),
+ .length = RCM_K1879_AREA1_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __iomem *g_k1879_mif;
+
+static void __iomem *k1879_mif_base(void)
+{
+ BUG_ON(!g_k1879_mif);
+ return g_k1879_mif;
+}
+
+static void __iomem *k1879_sctl_base(void)
+{
+ return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
+}
+
+static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
+ handle_level_irq(irq, desc);
+}
+
+static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
+ handle_level_irq(irq, desc);
+}
+
+static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
+ handle_level_irq(irq, desc);
+}
+
+static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
+ handle_level_irq(irq, desc);
+}
+
+static void __init k1879_map_io(void)
+{
+ iotable_init(k1879_io_desc, ARRAY_SIZE(k1879_io_desc));
+}
+
+static const struct of_device_id i2c_of_match[] __initconst = {
+ { .compatible = "rcm,i2c-ocores", },
+ {}
+};
+
+static void __init setup_i2c_fixup(u64 base,
+ void (*fixup_handler)(unsigned int irq,
+ struct irq_desc *desc))
+{
+ struct device_node *np;
+ int irq;
+
+ np = of_find_matching_node_by_address(NULL, i2c_of_match, base);
+ BUG_ON(!np);
+ irq = of_irq_get(np, 0);
+ irq_set_handler(irq, fixup_handler);
+}
+
+static void __init k1879_dt_mach_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ g_k1879_mif = ioremap_nocache(RCM_K1879_MIF_PHYS_BASE,
+ RCM_K1879_MIF_SIZE);
+ BUG_ON(!g_k1879_mif);
+
+ /* Setup i2c interrupt fixups */
+ setup_i2c_fixup(RCM_K1879_GRI2C0_PHYS_BASE, k1879_level_irq_i2c0_fixup);
+ setup_i2c_fixup(RCM_K1879_GRI2C1_PHYS_BASE, k1879_level_irq_i2c1_fixup);
+ setup_i2c_fixup(RCM_K1879_GRI2C2_PHYS_BASE, k1879_level_irq_i2c2_fixup);
+ setup_i2c_fixup(RCM_K1879_GRI2C3_PHYS_BASE, k1879_level_irq_i2c3_fixup);
+ /* I2C0 (Internal, HDMI) needs some extra love */
+ do {
+ void __iomem *mif;
+
+ mif = k1879_mif_base();
+ writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE_ENA);
+ writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE);
+ writel(1, mif + RCM_K1879_MIF_I2C_INT_ENA);
+ } while (0);
+}
+
+void k1879_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* The recommended way to do a soft-reboot on this platform
+ is write directly to watchdog registers and cause an immediate
+ system reboot
+ */
+ void __iomem *regs;
+
+ pr_info("k1879: Requested system restart\n");
+ regs = ioremap_nocache(0x20025000, 0xfff);
+ iowrite32(1, (regs + 0xf00));
+ iowrite32(1, (regs + 0xf04));
+ /* Goodbye! */
+}
+
+static const char * const k1879_dt_match[] = {
+ "rcm,mb7707",
+ "rcm,k1879xb1ya",
+ NULL
+};
+
+DT_MACHINE_START(K1879, "RC Module K1879XB1YA (Device Tree)")
+ .map_io = k1879_map_io,
+ .init_machine = k1879_dt_mach_init,
+ .dt_compat = k1879_dt_match,
+ .restart = k1879_restart
+MACHINE_END
diff --git a/arch/arm/mach-rcm-k1879xb1/cpuidle.c b/arch/arm/mach-rcm-k1879xb1/cpuidle.c
new file mode 100644
index 0000000..7c621b6
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/cpuidle.c
@@ -0,0 +1,48 @@
+/*
+ * CPU idle for RC Module K1879XB1YA SoC
+ *
+ * Copyright (C) 2015 RC Module.
+ * http://www.module.ru/
+ *
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * Based on Davinci CPU idle code
+ * (arch/arm/mach-davinci/cpuidle.c)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/cpuidle.h>
+
+/*
+ * We only enable WFI here, since DDR will enter self-refresh
+ * on it's own when it can (bootloader takes care to configure that)
+ */
+
+static struct cpuidle_driver rcm_idle_driver = {
+ .name = "rcm_k1879xb1_idle",
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .state_count = 1,
+};
+
+static int __init rcm_cpuidle_probe(struct platform_device *pdev)
+{
+ return cpuidle_register(&rcm_idle_driver, NULL);
+}
+
+static struct platform_driver rcm_cpuidle_driver = {
+ .driver = {
+ .name = "cpuidle-rcm-k1879xb1",
+ },
+};
+
+static int __init rcm_cpuidle_init(void)
+{
+ return platform_driver_probe(&rcm_cpuidle_driver, rcm_cpuidle_probe);
+}
+device_initcall(rcm_cpuidle_init);
diff --git a/arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h b/arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
new file mode 100644
index 0000000..66c5b65
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-rcm-k1879/include/mach/hardware.h
+ *
+ * Copyright (C) 2011-2015 RC Module
+ *
+ * Sergey Mironov <ierton@gmail.com>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef ASM_RCM_K1879_HARDWARE_H
+#define ASM_RCM_K1879_HARDWARE_H
+
+#define RCM_K1879_PHYS(bus, off) (RCM_K1879_##bus##_PHYS_BASE + (off))
+#define RCM_K1879_VIRT(bus, off) (RCM_K1879_##bus##_VIRT_BASE + (off))
+
+/* Areas of system memory space */
+#define RCM_K1879_AREA0_PHYS_BASE 0x20000000
+#define RCM_K1879_AREA0_SIZE SZ_512K
+#define RCM_K1879_AREA0_VIRT_BASE 0xf8000000
+
+#define RCM_K1879_AREA1_PHYS_BASE 0x80000000
+#define RCM_K1879_AREA1_SIZE SZ_2M
+#define RCM_K1879_AREA1_VIRT_BASE 0xf8100000
+
+/*
+ * Bare minimum required to bring up the board.
+ * The rest comes from DeviceTree
+ */
+
+#define RCM_K1879_UART0_OFF 0x0002b000
+#define RCM_K1879_UART0_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_UART0_OFF)
+#define RCM_K1879_UART0_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_UART0_OFF)
+
+#define RCM_K1879_GRI2C1_OFF 0x00021000
+#define RCM_K1879_GRI2C1_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_GRI2C1_OFF)
+#define RCM_K1879_GRI2C1_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_GRI2C1_OFF)
+
+#define RCM_K1879_GRI2C2_OFF 0x00026000
+#define RCM_K1879_GRI2C2_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_GRI2C2_OFF)
+#define RCM_K1879_GRI2C2_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_GRI2C2_OFF)
+
+#define RCM_K1879_GRI2C3_OFF 0x0002d000
+#define RCM_K1879_GRI2C3_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_GRI2C3_OFF)
+#define RCM_K1879_GRI2C3_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_GRI2C3_OFF)
+
+#define RCM_K1879_SCTL_OFF 0x0003c000
+#define RCM_K1879_SCTL_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_SCTL_OFF)
+#define RCM_K1879_SCTL_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_SCTL_OFF)
+#define RCM_K1879_SCTL_SIZE 0x1000
+
+#define RCM_K1879_MIF_OFF 0x00172000
+#define RCM_K1879_MIF_PHYS_BASE RCM_K1879_PHYS(AREA1, RCM_K1879_MIF_OFF)
+#define RCM_K1879_MIF_SIZE 0x100
+
+#define RCM_K1879_GRI2C0_OFF 0x00171000
+#define RCM_K1879_GRI2C0_PHYS_BASE RCM_K1879_PHYS(AREA1, RCM_K1879_GRI2C0_OFF)
+
+#define RCM_K1879_MIF_I2C_INT_TYPE_ENA 0x94
+#define RCM_K1879_MIF_I2C_INT_TYPE 0x98
+#define RCM_K1879_MIF_I2C_INT_ENA 0x9C
+#define RCM_K1879_MIF_I2C_INT_STAT 0xA0
+#define RCM_K1879_SCTL_INT_P_OUT 0x08
+
+#endif
diff --git a/arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h b/arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
new file mode 100644
index 0000000..5f4e500
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-rcm-k1879/include/mach/uncompress.h
+ *
+ * Copyright (C) 2011 RC Module
+ *
+ * Sergey Mironov <ierton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef ASM_ARM_ARCH_IO_H
+#define ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define UART_THR ((volatile unsigned char *)(RCM_K1879_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(RCM_K1879_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ /* Transmit fifo not full? */
+ if (*UART_LSR & LSR_THRE)
+ break;
+ }
+
+ *UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
+
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-23 15:50 ` [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
@ 2015-06-23 16:11 ` Russell King - ARM Linux
2015-06-23 16:56 ` Andrew
2015-06-24 2:15 ` Rob Herring
1 sibling, 1 reply; 20+ messages in thread
From: Russell King - ARM Linux @ 2015-06-23 16:11 UTC (permalink / raw)
To: Andrew Andrianov
Cc: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Arnd Bergmann, Rob Herring, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
On Tue, Jun 23, 2015 at 06:50:01PM +0300, Andrew Andrianov wrote:
> +config ARCH_RCM_K1879XB1
> + bool "RC Module K1879XB1YA"
> + depends on MMU
> + select CPU_V6
> + select ARM_AMBA
> + select ARM_VIC
Obviously something's up with the indentation on the ARM_AMBA line...
Also, these select statements should be sorted alphabetically to help
avoid future merge conflicts.
> @@ -1417,6 +1418,7 @@ config DEBUG_UART_PHYS
> default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
> default 0xfffe8600 if DEBUG_UART_BCM63XX
> default 0xfffff700 if ARCH_IOP33X
> + default 0x2002b000 if ARCH_RCM_K1879XB1
> depends on ARCH_EP93XX || \
> DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> DEBUG_LL_UART_EFM32 || \
> @@ -1511,6 +1513,7 @@ config DEBUG_UART_VIRT
> default 0xfefff700 if ARCH_IOP33X
> default 0xff003000 if DEBUG_U300_UART
> default 0xffd01000 if DEBUG_HIP01_UART
> + default 0xf802b000 if ARCH_RCM_K1879XB1
Both of these lists have an order - please add your entries in order as
well.
> default DEBUG_UART_PHYS if !MMU
> depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 985227c..9beb65f 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -184,6 +184,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
> machine-$(CONFIG_ARCH_ORION5X) += orion5x
> machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
> machine-$(CONFIG_ARCH_PXA) += pxa
> +machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1
> machine-$(CONFIG_ARCH_QCOM) += qcom
R doesn't come between P and Q, the order of these options is even
documented in the commentry above the list (so here we have more
proof that comments are worthless. :()
> +static struct map_desc k1879_io_desc[] __initdata = {
> + {
> + .virtual = RCM_K1879_AREA0_VIRT_BASE,
> + .pfn = __phys_to_pfn(RCM_K1879_AREA0_PHYS_BASE),
> + .length = RCM_K1879_AREA0_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = RCM_K1879_AREA1_VIRT_BASE,
> + .pfn = __phys_to_pfn(RCM_K1879_AREA1_PHYS_BASE),
> + .length = RCM_K1879_AREA1_SIZE,
> + .type = MT_DEVICE,
> + },
> +};
We've moved away from static mapping - is there a reason to keep these?
> +static void __iomem *k1879_mif_base(void)
> +{
> + BUG_ON(!g_k1879_mif);
> + return g_k1879_mif;
> +}
> +
> +static void __iomem *k1879_sctl_base(void)
> +{
> + return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
> +}
> +
> +static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
I'm not sure this is the best way to deal with this - but I need to look
at the irqchip stuff to suggest an alternative. Maybe you could provide
a description of what's going on here first?
> +void k1879_restart(enum reboot_mode mode, const char *cmd)
static?
> +{
> + /* The recommended way to do a soft-reboot on this platform
> + is write directly to watchdog registers and cause an immediate
> + system reboot
> + */
> + void __iomem *regs;
> +
> + pr_info("k1879: Requested system restart\n");
I assume this is debugging - do you need to print this?
> + regs = ioremap_nocache(0x20025000, 0xfff);
Please use ioremap() instead. Both of these calls may sleep, and so
should not be used in this path (which can be called from atomic
contexts.) Hence, this needs to happen elsewhere (in your .init_machine
method.)
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-23 16:11 ` Russell King - ARM Linux
@ 2015-06-23 16:56 ` Andrew
0 siblings, 0 replies; 20+ messages in thread
From: Andrew @ 2015-06-23 16:56 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Arnd Bergmann, Rob Herring, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Russell King - ARM Linux писал 23.06.2015 19:11:
> On Tue, Jun 23, 2015 at 06:50:01PM +0300, Andrew Andrianov wrote:
>> +config ARCH_RCM_K1879XB1
>> + bool "RC Module K1879XB1YA"
>> + depends on MMU
>> + select CPU_V6
>> + select ARM_AMBA
>> + select ARM_VIC
>
> Obviously something's up with the indentation on the ARM_AMBA line...
> Also, these select statements should be sorted alphabetically to help
> avoid future merge conflicts.
>
>> @@ -1417,6 +1418,7 @@ config DEBUG_UART_PHYS
>> default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
>> default 0xfffe8600 if DEBUG_UART_BCM63XX
>> default 0xfffff700 if ARCH_IOP33X
>> + default 0x2002b000 if ARCH_RCM_K1879XB1
>> depends on ARCH_EP93XX || \
>> DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
>> DEBUG_LL_UART_EFM32 || \
>> @@ -1511,6 +1513,7 @@ config DEBUG_UART_VIRT
>> default 0xfefff700 if ARCH_IOP33X
>> default 0xff003000 if DEBUG_U300_UART
>> default 0xffd01000 if DEBUG_HIP01_UART
>> + default 0xf802b000 if ARCH_RCM_K1879XB1
>
> Both of these lists have an order - please add your entries in order as
> well.
>
>> default DEBUG_UART_PHYS if !MMU
>> depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
>> DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>> index 985227c..9beb65f 100644
>> --- a/arch/arm/Makefile
>> +++ b/arch/arm/Makefile
>> @@ -184,6 +184,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
>> machine-$(CONFIG_ARCH_ORION5X) += orion5x
>> machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
>> machine-$(CONFIG_ARCH_PXA) += pxa
>> +machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1
>> machine-$(CONFIG_ARCH_QCOM) += qcom
>
> R doesn't come between P and Q, the order of these options is even
> documented in the commentry above the list (so here we have more
> proof that comments are worthless. :()
Oops, I must've mixed it up during re-bases and it went unnoticed.
>
>> +static struct map_desc k1879_io_desc[] __initdata = {
>> + {
>> + .virtual = RCM_K1879_AREA0_VIRT_BASE,
>> + .pfn = __phys_to_pfn(RCM_K1879_AREA0_PHYS_BASE),
>> + .length = RCM_K1879_AREA0_SIZE,
>> + .type = MT_DEVICE,
>> + },
>> + {
>> + .virtual = RCM_K1879_AREA1_VIRT_BASE,
>> + .pfn = __phys_to_pfn(RCM_K1879_AREA1_PHYS_BASE),
>> + .length = RCM_K1879_AREA1_SIZE,
>> + .type = MT_DEVICE,
>> + },
>> +};
>
> We've moved away from static mapping - is there a reason to keep these?
>
>> +static void __iomem *k1879_mif_base(void)
>> +{
>> + BUG_ON(!g_k1879_mif);
>> + return g_k1879_mif;
>> +}
>> +
>> +static void __iomem *k1879_sctl_base(void)
>> +{
>> + return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
>> +}
>> +
>> +static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
>> + handle_level_irq(irq, desc);
>> +}
>> +
>> +static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
>> + handle_level_irq(irq, desc);
>> +}
>> +
>> +static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
>> + handle_level_irq(irq, desc);
>> +}
>> +
>> +static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
>> + handle_level_irq(irq, desc);
>> +}
>
> I'm not sure this is the best way to deal with this - but I need to
> look
> at the irqchip stuff to suggest an alternative. Maybe you could
> provide
> a description of what's going on here first?
As far as I remember that's a workaround. The problem here is that
Aeroflex
Gaisler i2c has impulse interrupts and that had some hw problems
connecting
with VIC.
Therefore hardware folks have made it level-triggered, and you have to
clear
'pending' bit in SCTL register each time the interrupt arrives.
This is very platform-specific, so I don't think hacking i2c driver
itself would be any
better.
>
>> +void k1879_restart(enum reboot_mode mode, const char *cmd)
>
> static?
>
>> +{
>> + /* The recommended way to do a soft-reboot on this platform
>> + is write directly to watchdog registers and cause an immediate
>> + system reboot
>> + */
>> + void __iomem *regs;
>> +
>> + pr_info("k1879: Requested system restart\n");
>
> I assume this is debugging - do you need to print this?
>
>> + regs = ioremap_nocache(0x20025000, 0xfff);
>
> Please use ioremap() instead. Both of these calls may sleep, and so
> should not be used in this path (which can be called from atomic
> contexts.) Hence, this needs to happen elsewhere (in your
> .init_machine
> method.)
Thanks for the quick response, I'll fix all the things you've noted and
resend
the patches tomorrow.
--
Regards,
Andrew
RC Module :: http://module.ru
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-23 15:50 ` [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
2015-06-23 16:11 ` Russell King - ARM Linux
@ 2015-06-24 2:15 ` Rob Herring
2015-06-26 10:11 ` Andrew
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
1 sibling, 2 replies; 20+ messages in thread
From: Rob Herring @ 2015-06-24 2:15 UTC (permalink / raw)
To: Andrew Andrianov
Cc: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Arnd Bergmann, Rob Herring, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
On Tue, Jun 23, 2015 at 10:50 AM, Andrew Andrianov <andrew@ncrmnt.org> wrote:
> This patch adds basic support for RC Module's
> K1879XB1YA SoC.
>
> K1879XB1YA is a hybrid SoC with one ARM1176JZF-S
> core running linux and one NeuroMatrix DSP core.
>
> http://www.module.ru/en/catalog/micro/mikroshema_dekodera_cifrovogo_televizionnogo_signala_sbis_k1879hb1ya/
> http://www.module.ru/en/catalog/micro/micro_pc/
>
> Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
> ---
> arch/arm/Kconfig | 18 +++
> arch/arm/Kconfig.debug | 5 +-
> arch/arm/Makefile | 1 +
> arch/arm/mach-rcm-k1879xb1/Kconfig | 0
> arch/arm/mach-rcm-k1879xb1/Makefile | 2 +
> arch/arm/mach-rcm-k1879xb1/Makefile.boot | 4 +
> arch/arm/mach-rcm-k1879xb1/board-dt.c | 152 +++++++++++++++++++++
> arch/arm/mach-rcm-k1879xb1/cpuidle.c | 48 +++++++
> arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h | 75 ++++++++++
> .../mach-rcm-k1879xb1/include/mach/uncompress.h | 54 ++++++++
> 10 files changed, 358 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/mach-rcm-k1879xb1/Kconfig
> create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile
> create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile.boot
> create mode 100644 arch/arm/mach-rcm-k1879xb1/board-dt.c
> create mode 100644 arch/arm/mach-rcm-k1879xb1/cpuidle.c
> create mode 100644 arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
> create mode 100644 arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 45df48b..2de4d2a 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -619,6 +619,24 @@ config ARCH_PXA
> help
> Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
>
> +config ARCH_RCM_K1879XB1
> + bool "RC Module K1879XB1YA"
This config entry belongs in your mach dir and should depend on ARCH_MULTI_V6
> + depends on MMU
> + select CPU_V6
> + select ARM_AMBA
> + select ARM_VIC
> + select SPARSE_IRQ
Multi-platform will select this for you.
> + select GENERIC_GPIO
Don't think this is needed.
> + select COMMON_CLK
Multi-platform will select this for you.
> + select USB_ARCH_HAS_EHCI
> + select USB_ARCH_HAS_OHCI
Don't think these are needed anymore.
> + select ARCH_REQUIRE_GPIOLIB
> + select NEED_MACH_GPIO_H
Why?
> + select GENERIC_CLOCKEVENTS
Multi-platform will select this for you.
> + select CLKSRC_ARM_DIT
> + help
> + Support for RC Module's K1879X SoCs
> +
> config ARCH_SHMOBILE_LEGACY
> bool "Renesas ARM SoCs (non-multiplatform)"
> select ARCH_SHMOBILE
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 0c12ffb..48ee54c 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1318,7 +1318,8 @@ config DEBUG_UART_8250
> (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
> ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
> ARCH_IOP33X || ARCH_IXP4XX || \
> - ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
> + ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC || \
> + ARCH_RCM_K1879XB1
>
> # Compatibility options for BCM63xx
> config DEBUG_UART_BCM63XX
> @@ -1417,6 +1418,7 @@ config DEBUG_UART_PHYS
> default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
> default 0xfffe8600 if DEBUG_UART_BCM63XX
> default 0xfffff700 if ARCH_IOP33X
> + default 0x2002b000 if ARCH_RCM_K1879XB1
This cannot depend on ARCH_RCM_K1879XB1 once you enable multi-platform build.
> depends on ARCH_EP93XX || \
> DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> DEBUG_LL_UART_EFM32 || \
> @@ -1511,6 +1513,7 @@ config DEBUG_UART_VIRT
> default 0xfefff700 if ARCH_IOP33X
> default 0xff003000 if DEBUG_U300_UART
> default 0xffd01000 if DEBUG_HIP01_UART
> + default 0xf802b000 if ARCH_RCM_K1879XB1
ditto.
> default DEBUG_UART_PHYS if !MMU
> depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 985227c..9beb65f 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -184,6 +184,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
> machine-$(CONFIG_ARCH_ORION5X) += orion5x
> machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
> machine-$(CONFIG_ARCH_PXA) += pxa
> +machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1
> machine-$(CONFIG_ARCH_QCOM) += qcom
> machine-$(CONFIG_ARCH_REALVIEW) += realview
> machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
> diff --git a/arch/arm/mach-rcm-k1879xb1/Kconfig b/arch/arm/mach-rcm-k1879xb1/Kconfig
> new file mode 100644
> index 0000000..e69de29
> diff --git a/arch/arm/mach-rcm-k1879xb1/Makefile b/arch/arm/mach-rcm-k1879xb1/Makefile
> new file mode 100644
> index 0000000..324af07
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/Makefile
> @@ -0,0 +1,2 @@
> +obj-y += board-dt.o cpuidle.o
> +
> diff --git a/arch/arm/mach-rcm-k1879xb1/Makefile.boot b/arch/arm/mach-rcm-k1879xb1/Makefile.boot
> new file mode 100644
> index 0000000..4075590
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/Makefile.boot
> @@ -0,0 +1,4 @@
> + zreladdr-y := 0x40008000
> +params_phys-y := 0x40000100
> +initrd_phys-y := 0x40800000
You don't need this file on multi-platform.
> +
> diff --git a/arch/arm/mach-rcm-k1879xb1/board-dt.c b/arch/arm/mach-rcm-k1879xb1/board-dt.c
> new file mode 100644
> index 0000000..00084ad
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/board-dt.c
> @@ -0,0 +1,152 @@
> +/*
> + * arch/arm/mach-rcm-k1879/board-dt.c
> + *
> + * Copyright (C) 2011-2015 RC Module
> + *
> + * Sergey Mironov <ierton@gmail.com>
> + * Andrew Andrianov <andrew@ncrmnt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
You sure you want GPLv3?
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <asm/mach/map.h>
> +#include <asm/mach/arch.h>
> +#include <mach/hardware.h>
> +
> +static struct map_desc k1879_io_desc[] __initdata = {
> + {
> + .virtual = RCM_K1879_AREA0_VIRT_BASE,
> + .pfn = __phys_to_pfn(RCM_K1879_AREA0_PHYS_BASE),
> + .length = RCM_K1879_AREA0_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = RCM_K1879_AREA1_VIRT_BASE,
> + .pfn = __phys_to_pfn(RCM_K1879_AREA1_PHYS_BASE),
> + .length = RCM_K1879_AREA1_SIZE,
> + .type = MT_DEVICE,
You should use ioremap where ever possible instead of these.
> + },
> +};
> +
> +static void __iomem *g_k1879_mif;
> +
> +static void __iomem *k1879_mif_base(void)
> +{
> + BUG_ON(!g_k1879_mif);
> + return g_k1879_mif;
> +}
> +
> +static void __iomem *k1879_sctl_base(void)
> +{
> + return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
> +}
> +
> +static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
What are all these for? They probably belong somewhere else.
> +
> +static void __init k1879_map_io(void)
> +{
> + iotable_init(k1879_io_desc, ARRAY_SIZE(k1879_io_desc));
> +}
> +
> +static const struct of_device_id i2c_of_match[] __initconst = {
> + { .compatible = "rcm,i2c-ocores", },
> + {}
> +};
> +
> +static void __init setup_i2c_fixup(u64 base,
> + void (*fixup_handler)(unsigned int irq,
> + struct irq_desc *desc))
> +{
> + struct device_node *np;
> + int irq;
> +
> + np = of_find_matching_node_by_address(NULL, i2c_of_match, base);
> + BUG_ON(!np);
This may not print if your serial console is not up. You may want to
use WARN instead so the boot continues.
> + irq = of_irq_get(np, 0);
> + irq_set_handler(irq, fixup_handler);
> +}
> +
> +static void __init k1879_dt_mach_init(void)
> +{
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> + g_k1879_mif = ioremap_nocache(RCM_K1879_MIF_PHYS_BASE,
> + RCM_K1879_MIF_SIZE);
> + BUG_ON(!g_k1879_mif);
> +
> + /* Setup i2c interrupt fixups */
> + setup_i2c_fixup(RCM_K1879_GRI2C0_PHYS_BASE, k1879_level_irq_i2c0_fixup);
> + setup_i2c_fixup(RCM_K1879_GRI2C1_PHYS_BASE, k1879_level_irq_i2c1_fixup);
> + setup_i2c_fixup(RCM_K1879_GRI2C2_PHYS_BASE, k1879_level_irq_i2c2_fixup);
> + setup_i2c_fixup(RCM_K1879_GRI2C3_PHYS_BASE, k1879_level_irq_i2c3_fixup);
> + /* I2C0 (Internal, HDMI) needs some extra love */
> + do {
> + void __iomem *mif;
> +
> + mif = k1879_mif_base();
> + writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE_ENA);
> + writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE);
> + writel(1, mif + RCM_K1879_MIF_I2C_INT_ENA);
> + } while (0);
> +}
> +
> +void k1879_restart(enum reboot_mode mode, const char *cmd)
> +{
> + /* The recommended way to do a soft-reboot on this platform
> + is write directly to watchdog registers and cause an immediate
> + system reboot
> + */
> + void __iomem *regs;
> +
> + pr_info("k1879: Requested system restart\n");
> + regs = ioremap_nocache(0x20025000, 0xfff);
> + iowrite32(1, (regs + 0xf00));
> + iowrite32(1, (regs + 0xf04));
> + /* Goodbye! */
> +}
> +
> +static const char * const k1879_dt_match[] = {
> + "rcm,mb7707",
> + "rcm,k1879xb1ya",
> + NULL
> +};
> +
> +DT_MACHINE_START(K1879, "RC Module K1879XB1YA (Device Tree)")
> + .map_io = k1879_map_io,
> + .init_machine = k1879_dt_mach_init,
> + .dt_compat = k1879_dt_match,
> + .restart = k1879_restart
> +MACHINE_END
> diff --git a/arch/arm/mach-rcm-k1879xb1/cpuidle.c b/arch/arm/mach-rcm-k1879xb1/cpuidle.c
> new file mode 100644
> index 0000000..7c621b6
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/cpuidle.c
This should be a separate patch and located in drivers/cpuidle/
> @@ -0,0 +1,48 @@
> +/*
> + * CPU idle for RC Module K1879XB1YA SoC
> + *
> + * Copyright (C) 2015 RC Module.
> + * http://www.module.ru/
> + *
> + * Andrew Andrianov <andrew@ncrmnt.org>
> + *
> + * Based on Davinci CPU idle code
> + * (arch/arm/mach-davinci/cpuidle.c)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/cpuidle.h>
> +#include <asm/cpuidle.h>
> +
> +/*
> + * We only enable WFI here, since DDR will enter self-refresh
> + * on it's own when it can (bootloader takes care to configure that)
> + */
> +
> +static struct cpuidle_driver rcm_idle_driver = {
> + .name = "rcm_k1879xb1_idle",
> + .states[0] = ARM_CPUIDLE_WFI_STATE,
> + .state_count = 1,
> +};
> +
> +static int __init rcm_cpuidle_probe(struct platform_device *pdev)
> +{
> + return cpuidle_register(&rcm_idle_driver, NULL);
> +}
> +
> +static struct platform_driver rcm_cpuidle_driver = {
> + .driver = {
> + .name = "cpuidle-rcm-k1879xb1",
> + },
> +};
> +
> +static int __init rcm_cpuidle_init(void)
> +{
> + return platform_driver_probe(&rcm_cpuidle_driver, rcm_cpuidle_probe);
> +}
> +device_initcall(rcm_cpuidle_init);
> diff --git a/arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h b/arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
> new file mode 100644
> index 0000000..66c5b65
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
> @@ -0,0 +1,75 @@
> +/*
> + * arch/arm/mach-rcm-k1879/include/mach/hardware.h
> + *
> + * Copyright (C) 2011-2015 RC Module
> + *
> + * Sergey Mironov <ierton@gmail.com>
> + * Andrew Andrianov <andrew@ncrmnt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef ASM_RCM_K1879_HARDWARE_H
> +#define ASM_RCM_K1879_HARDWARE_H
> +
> +#define RCM_K1879_PHYS(bus, off) (RCM_K1879_##bus##_PHYS_BASE + (off))
> +#define RCM_K1879_VIRT(bus, off) (RCM_K1879_##bus##_VIRT_BASE + (off))
> +
> +/* Areas of system memory space */
> +#define RCM_K1879_AREA0_PHYS_BASE 0x20000000
> +#define RCM_K1879_AREA0_SIZE SZ_512K
> +#define RCM_K1879_AREA0_VIRT_BASE 0xf8000000
> +
> +#define RCM_K1879_AREA1_PHYS_BASE 0x80000000
> +#define RCM_K1879_AREA1_SIZE SZ_2M
> +#define RCM_K1879_AREA1_VIRT_BASE 0xf8100000
> +
> +/*
> + * Bare minimum required to bring up the board.
> + * The rest comes from DeviceTree
> + */
> +
> +#define RCM_K1879_UART0_OFF 0x0002b000
> +#define RCM_K1879_UART0_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_UART0_OFF)
> +#define RCM_K1879_UART0_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_UART0_OFF)
> +
> +#define RCM_K1879_GRI2C1_OFF 0x00021000
> +#define RCM_K1879_GRI2C1_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_GRI2C1_OFF)
> +#define RCM_K1879_GRI2C1_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_GRI2C1_OFF)
> +
> +#define RCM_K1879_GRI2C2_OFF 0x00026000
> +#define RCM_K1879_GRI2C2_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_GRI2C2_OFF)
> +#define RCM_K1879_GRI2C2_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_GRI2C2_OFF)
> +
> +#define RCM_K1879_GRI2C3_OFF 0x0002d000
> +#define RCM_K1879_GRI2C3_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_GRI2C3_OFF)
> +#define RCM_K1879_GRI2C3_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_GRI2C3_OFF)
> +
> +#define RCM_K1879_SCTL_OFF 0x0003c000
> +#define RCM_K1879_SCTL_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_SCTL_OFF)
> +#define RCM_K1879_SCTL_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_SCTL_OFF)
> +#define RCM_K1879_SCTL_SIZE 0x1000
> +
> +#define RCM_K1879_MIF_OFF 0x00172000
> +#define RCM_K1879_MIF_PHYS_BASE RCM_K1879_PHYS(AREA1, RCM_K1879_MIF_OFF)
> +#define RCM_K1879_MIF_SIZE 0x100
> +
> +#define RCM_K1879_GRI2C0_OFF 0x00171000
> +#define RCM_K1879_GRI2C0_PHYS_BASE RCM_K1879_PHYS(AREA1, RCM_K1879_GRI2C0_OFF)
> +
> +#define RCM_K1879_MIF_I2C_INT_TYPE_ENA 0x94
> +#define RCM_K1879_MIF_I2C_INT_TYPE 0x98
> +#define RCM_K1879_MIF_I2C_INT_ENA 0x9C
> +#define RCM_K1879_MIF_I2C_INT_STAT 0xA0
> +#define RCM_K1879_SCTL_INT_P_OUT 0x08
Really, all these addresses at least should come from the DT.
> +
> +#endif
> diff --git a/arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h b/arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
> new file mode 100644
> index 0000000..5f4e500
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
This is not needed on a multi-platform enabled mach.
> @@ -0,0 +1,54 @@
> +/*
> + * arch/arm/mach-rcm-k1879/include/mach/uncompress.h
> + *
> + * Copyright (C) 2011 RC Module
> + *
> + * Sergey Mironov <ierton@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef ASM_ARM_ARCH_IO_H
> +#define ASM_ARM_ARCH_IO_H
> +
> +#include <mach/hardware.h>
> +
> +#define UART_THR ((volatile unsigned char *)(RCM_K1879_UART0_PHYS_BASE + 0x0))
> +#define UART_LSR ((volatile unsigned char *)(RCM_K1879_UART0_PHYS_BASE + 0x14))
> +
> +#define LSR_THRE 0x20
> +
> +static void putc(const char c)
> +{
> + int i;
> +
> + for (i = 0; i < 0x1000; i++) {
> + /* Transmit fifo not full? */
> + if (*UART_LSR & LSR_THRE)
> + break;
> + }
> +
> + *UART_THR = c;
> +}
> +
> +static void flush(void)
> +{
> +}
> +
> +/*
> + * nothing to do
> + */
> +#define arch_decomp_setup()
> +#define arch_decomp_wdog()
> +
> +#endif
> +
> --
> 2.1.4
>
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-24 2:15 ` Rob Herring
@ 2015-06-26 10:11 ` Andrew
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
1 sibling, 0 replies; 20+ messages in thread
From: Andrew @ 2015-06-26 10:11 UTC (permalink / raw)
To: Rob Herring
Cc: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Arnd Bergmann, Rob Herring, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Rob Herring писал 24.06.2015 05:15:
>> +
>> +static void __iomem *k1879_sctl_base(void)
>> +{
>> + return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
>> +}
>> +
>> +static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
>> + handle_level_irq(irq, desc);
>> +}
>> +
>> +static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
>> + handle_level_irq(irq, desc);
>> +}
>> +
>> +static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
>> + handle_level_irq(irq, desc);
>> +}
>> +
>> +static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct
>> irq_desc *desc)
>> +{
>> + writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
>> + handle_level_irq(irq, desc);
>> +}
>
> What are all these for? They probably belong somewhere else.
As I've written already in response to to Russel King's review, these
are the workarounds
around aeroflex i2c IP interrupt handling. Basically every interrupt
from i2c requires
cleaning up respective 'pending' bit in SCTL register. This could be
done in i2c driver,
but it is very platform-specific and would look ugly in the driver. If
you know any cleaner
way for such a workaround, please advice. Right now I've cleaned up
everything, save for
these fixups.
>> diff --git a/arch/arm/mach-rcm-k1879xb1/cpuidle.c
>> b/arch/arm/mach-rcm-k1879xb1/cpuidle.c
>> new file mode 100644
>> index 0000000..7c621b6
>> --- /dev/null
>> +++ b/arch/arm/mach-rcm-k1879xb1/cpuidle.c
>
> This should be a separate patch and located in drivers/cpuidle/
Got it, thanks.
--
Regards,
Andrew
RC Module :: http://module.ru
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA
2015-06-24 2:15 ` Rob Herring
2015-06-26 10:11 ` Andrew
@ 2015-06-30 15:15 ` Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
` (4 more replies)
1 sibling, 5 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-30 15:15 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Rob, Russel, thanks for your reviews, I'm now sending in the fixed patchset.
Everything's now ARCH_MULTI_V6-friendly, the config is updated as well.
Since I got no feedback on how to properly implement that i2c workaround it
remains as is, I only rewrote the code to take the fixup-id and adresses from
devicetree instead.
The only alternative to this workaround I see - would be implementing a
'proxy' irqchip that will take care of clearing the relevant bits. But it
looks way more messy. I'm open to suggestions here.
The patchset has been tested to compile and boot against v4.1 tag
Andrew Andrianov (5):
ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
of: Add vendor prefix for RC Module
ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA
ARM: Add defconfig for RC Module K1879XB1YA SoC
cpuidle: ARM: Add cpuidle driver for K1879XB1YA
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 3 +-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts | 146 ++
arch/arm/boot/dts/rcm-k1879xb1.dtsi | 518 ++++
arch/arm/configs/rcm_k1879xb1ya_defconfig | 2678 ++++++++++++++++++++
arch/arm/mach-rcm-k1879xb1/Kconfig | 10 +
arch/arm/mach-rcm-k1879xb1/Makefile | 2 +
arch/arm/mach-rcm-k1879xb1/board-dt.c | 146 ++
arch/arm/mach-rcm-k1879xb1/hardware.h | 48 +
drivers/cpuidle/Kconfig.arm | 6 +
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/cpuidle-rcm-k1879xb1.c | 48 +
15 files changed, 3610 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1.dtsi
create mode 100644 arch/arm/configs/rcm_k1879xb1ya_defconfig
create mode 100644 arch/arm/mach-rcm-k1879xb1/Kconfig
create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile
create mode 100644 arch/arm/mach-rcm-k1879xb1/board-dt.c
create mode 100644 arch/arm/mach-rcm-k1879xb1/hardware.h
create mode 100644 drivers/cpuidle/cpuidle-rcm-k1879xb1.c
--
2.1.4
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
@ 2015-06-30 15:15 ` Andrew Andrianov
2015-06-30 21:01 ` arnRe: " Arnd Bergmann
2015-06-30 15:15 ` [PATCH v2 2/5] of: Add vendor prefix for RC Module Andrew Andrianov
` (3 subsequent siblings)
4 siblings, 1 reply; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-30 15:15 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
This patch adds basic support for RC Module's
K1879XB1YA SoC.
K1879XB1YA is a hybrid SoC with one ARM1176JZF-S
core running linux and one NeuroMatrix DSP core.
http://www.module.ru/en/catalog/micro/mikroshema_dekodera_cifrovogo_televizionnogo_signala_sbis_k1879hb1ya/
http://www.module.ru/en/catalog/micro/micro_pc/
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 3 +-
arch/arm/Makefile | 1 +
arch/arm/mach-rcm-k1879xb1/Kconfig | 10 +++
arch/arm/mach-rcm-k1879xb1/Makefile | 2 +
arch/arm/mach-rcm-k1879xb1/board-dt.c | 146 ++++++++++++++++++++++++++++++++++
arch/arm/mach-rcm-k1879xb1/hardware.h | 48 +++++++++++
7 files changed, 211 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-rcm-k1879xb1/Kconfig
create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile
create mode 100644 arch/arm/mach-rcm-k1879xb1/board-dt.c
create mode 100644 arch/arm/mach-rcm-k1879xb1/hardware.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 45df48b..ca38bcf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -906,6 +906,8 @@ source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-qcom/Kconfig"
+source "arch/arm/mach-rcm-k1879xb1/Kconfig"
+
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0c12ffb..efcb7fc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1318,7 +1318,8 @@ config DEBUG_UART_8250
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
ARCH_IOP33X || ARCH_IXP4XX || \
- ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
+ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC || \
+ ARCH_RCM_K1879XB1
# Compatibility options for BCM63xx
config DEBUG_UART_BCM63XX
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 985227c..f3352ee 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -185,6 +185,7 @@ machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_QCOM) += qcom
+machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
diff --git a/arch/arm/mach-rcm-k1879xb1/Kconfig b/arch/arm/mach-rcm-k1879xb1/Kconfig
new file mode 100644
index 0000000..3defee0
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/Kconfig
@@ -0,0 +1,10 @@
+menuconfig ARCH_RCM_K1879XB1
+ bool "RC Module K1879XB1YA"
+ depends on MMU
+ depends on ARCH_MULTI_V6
+ select CPU_V6
+ select ARM_TIMER_SP804
+ select ARM_VIC
+ select ARM_AMBA
+ help
+ Support for RC Module's K1879X SoCs
diff --git a/arch/arm/mach-rcm-k1879xb1/Makefile b/arch/arm/mach-rcm-k1879xb1/Makefile
new file mode 100644
index 0000000..c28fc14
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/Makefile
@@ -0,0 +1,2 @@
+obj-y += board-dt.o
+
diff --git a/arch/arm/mach-rcm-k1879xb1/board-dt.c b/arch/arm/mach-rcm-k1879xb1/board-dt.c
new file mode 100644
index 0000000..48d3835
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/board-dt.c
@@ -0,0 +1,145 @@
+/*
+ * arch/arm/mach-rcm-k1879/board-dt.c
+ *
+ * Copyright (C) 2011-2015 RC Module
+ *
+ * Sergey Mironov <ierton@gmail.com>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include "hardware.h"
+
+static void __iomem *k1879_mif;
+static void __iomem *k1879_wdt;
+
+static void __iomem *k1879_mif_base(void)
+{
+ BUG_ON(!k1879_mif);
+ return k1879_mif;
+}
+
+static void __iomem *k1879_sctl_base(void)
+{
+ return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
+}
+
+static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
+ handle_level_irq(irq, desc);
+}
+
+static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
+ handle_level_irq(irq, desc);
+}
+
+static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
+ handle_level_irq(irq, desc);
+}
+
+static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct irq_desc *desc)
+{
+ writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
+ handle_level_irq(irq, desc);
+}
+
+static void (*k1879_i2c_fixups[])(unsigned int irq, struct irq_desc *desc) = {
+ k1879_level_irq_i2c0_fixup,
+ k1879_level_irq_i2c1_fixup,
+ k1879_level_irq_i2c2_fixup,
+ k1879_level_irq_i2c3_fixup
+};
+
+static void __init setup_i2c_fixups(void)
+{
+ struct device_node *np;
+ int irq;
+ u32 fixup_id = -1;
+
+ for_each_compatible_node(np, NULL, "rcm,i2c-ocores") {
+ int ret = of_property_read_u32(np, "rcm-irq-fixup-id",
+ &fixup_id);
+
+ if (ret) {
+ pr_warn("k1879xb1: rcm-irq-fixup-id invalid: %d\n",
+ ret);
+ continue;
+ }
+ if (fixup_id >= ARRAY_SIZE(k1879_i2c_fixups)) {
+ pr_warn("k1879xb1: rcm-irq-fixup-id %d too big\n",
+ fixup_id);
+ continue;
+ }
+ irq = of_irq_get(np, 0);
+ irq_set_handler(irq, k1879_i2c_fixups[fixup_id]);
+ }
+}
+
+static void __init k1879_dt_mach_init(void)
+{
+ struct device_node *np;
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ k1879_mif = ioremap(RCM_K1879_MIF_PHYS_BASE,
+ RCM_K1879_MIF_SIZE);
+ BUG_ON(!k1879_mif);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,sp805");
+ WARN_ON(!np);
+ if (np)
+ k1879_wdt = of_iomap(np, 0);
+
+ /* Setup i2c interrupt fixups */
+ setup_i2c_fixups();
+
+ /* I2C0 (Internal, HDMI) needs some extra love */
+ do {
+ void __iomem *mif;
+
+ mif = k1879_mif_base();
+ writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE_ENA);
+ writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE);
+ writel(1, mif + RCM_K1879_MIF_I2C_INT_ENA);
+ } while (0);
+}
+
+static void k1879_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* The recommended way to do a soft-reboot on this platform
+ is write directly to watchdog registers and cause an immediate
+ watchdog restart
+ */
+
+ if (!k1879_wdt) {
+ pr_err("k1879xb1: WDT regs were not properly mapped - reboot manually\n");
+ return;
+ }
+ iowrite32(1, (k1879_wdt + 0xf00));
+ iowrite32(1, (k1879_wdt + 0xf04));
+ /* Goodbye! */
+}
+
+static const char * const k1879_dt_match[] = {
+ "rcm,mb7707",
+ "rcm,k1879xb1ya",
+ NULL
+};
+
+DT_MACHINE_START(K1879, "RC Module K1879XB1YA (Device Tree)")
+ .init_machine = k1879_dt_mach_init,
+ .dt_compat = k1879_dt_match,
+ .restart = k1879_restart
+MACHINE_END
diff --git a/arch/arm/mach-rcm-k1879xb1/hardware.h b/arch/arm/mach-rcm-k1879xb1/hardware.h
new file mode 100644
index 0000000..2977ed7
--- /dev/null
+++ b/arch/arm/mach-rcm-k1879xb1/hardware.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-rcm-k1879/board-dt.c
+ *
+ * Copyright (C) 2011-2015 RC Module
+ *
+ * Sergey Mironov <ierton@gmail.com>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef HARDWARE_H
+#define HARDWARE_H
+
+/*
+ * This is the bare minimum required for arch code only.
+ * The rest comes from DeviceTree
+ */
+
+#define RCM_K1879_PHYS(bus, off) (RCM_K1879_##bus##_PHYS_BASE + (off))
+#define RCM_K1879_VIRT(bus, off) (RCM_K1879_##bus##_VIRT_BASE + (off))
+
+/* Areas of system memory space */
+#define RCM_K1879_AREA0_PHYS_BASE 0x20000000
+#define RCM_K1879_AREA0_SIZE SZ_512K
+#define RCM_K1879_AREA0_VIRT_BASE 0xf8000000
+
+#define RCM_K1879_AREA1_PHYS_BASE 0x80000000
+#define RCM_K1879_AREA1_SIZE SZ_2M
+#define RCM_K1879_AREA1_VIRT_BASE 0xf8100000
+
+#define RCM_K1879_SCTL_OFF 0x0003c000
+#define RCM_K1879_SCTL_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_SCTL_OFF)
+#define RCM_K1879_SCTL_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_SCTL_OFF)
+#define RCM_K1879_SCTL_SIZE 0x1000
+
+#define RCM_K1879_MIF_OFF 0x00172000
+#define RCM_K1879_MIF_PHYS_BASE RCM_K1879_PHYS(AREA1, RCM_K1879_MIF_OFF)
+#define RCM_K1879_MIF_SIZE 0x100
+
+#define RCM_K1879_MIF_I2C_INT_TYPE_ENA 0x94
+#define RCM_K1879_MIF_I2C_INT_TYPE 0x98
+#define RCM_K1879_MIF_I2C_INT_ENA 0x9C
+#define RCM_K1879_MIF_I2C_INT_STAT 0xA0
+#define RCM_K1879_SCTL_INT_P_OUT 0x08
+
+#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* arnRe: [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
2015-06-30 15:15 ` [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
@ 2015-06-30 21:01 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2015-06-30 21:01 UTC (permalink / raw)
To: Andrew Andrianov
Cc: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Rob Herring,
Pavel Shevchenko, Andrew Andrianov, linux-arm-kernel,
linux-kernel
On Tuesday 30 June 2015 18:15:03 Andrew Andrianov wrote:
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -185,6 +185,7 @@ machine-$(CONFIG_ARCH_ORION5X) += orion5x
> machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
> machine-$(CONFIG_ARCH_PXA) += pxa
> machine-$(CONFIG_ARCH_QCOM) += qcom
> +machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1
Could this be a bit shorter, e.g. 'mach-rcm' or 'mach-k1879xb1'?
The directories contain very few files for new platforms these days,
so we just tend to lump everything together by manufacturer.
> diff --git a/arch/arm/mach-rcm-k1879xb1/board-dt.c b/arch/arm/mach-rcm-k1879xb1/board-dt.c
> new file mode 100644
> index 0000000..48d3835
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/board-dt.c
> @@ -0,0 +1,145 @@
> +/*
> + * arch/arm/mach-rcm-k1879/board-dt.c
Generally speaking, please avoid comments that only contain the file
names. Also, 'board-dt' is not a particularly useful name if that is
used to handle all machines. Maybe call it the same as the platform.
> +
> +static void __iomem *k1879_sctl_base(void)
> +{
> + return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE;
> +}
Please don't hardcode virtual addresses like this. Instead read it from
DT at boot time using of_iomap or similar.
> +static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct irq_desc *desc)
> +{
> + writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT);
> + handle_level_irq(irq, desc);
> +}
> +
> +static void (*k1879_i2c_fixups[])(unsigned int irq, struct irq_desc *desc) = {
> + k1879_level_irq_i2c0_fixup,
> + k1879_level_irq_i2c1_fixup,
> + k1879_level_irq_i2c2_fixup,
> + k1879_level_irq_i2c3_fixup
> +};
It looks to me like this could be implemented as a nested irq domain with
its own irqchip driver rather than a hack in platform code.
> +static void __init k1879_dt_mach_init(void)
> +{
> + struct device_node *np;
> +
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> + k1879_mif = ioremap(RCM_K1879_MIF_PHYS_BASE,
> + RCM_K1879_MIF_SIZE);
> + BUG_ON(!k1879_mif);
> +
> + np = of_find_compatible_node(NULL, NULL, "arm,sp805");
> + WARN_ON(!np);
> + if (np)
> + k1879_wdt = of_iomap(np, 0);
Please move this into the watchdog driver as a reboot handler.
> + /* Setup i2c interrupt fixups */
> + setup_i2c_fixups();
> +
> + /* I2C0 (Internal, HDMI) needs some extra love */
> + do {
> + void __iomem *mif;
> +
> + mif = k1879_mif_base();
> + writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE_ENA);
> + writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE);
> + writel(1, mif + RCM_K1879_MIF_I2C_INT_ENA);
> + } while (0);
> +}
It would be nice if this could be moved to some driver as well, ideally
the one that already maps k1879_mif_base. Does this need to be
done really early at boot time?
> diff --git a/arch/arm/mach-rcm-k1879xb1/hardware.h b/arch/arm/mach-rcm-k1879xb1/hardware.h
> new file mode 100644
> index 0000000..2977ed7
> --- /dev/null
> +++ b/arch/arm/mach-rcm-k1879xb1/hardware.h
> @@ -0,0 +1,48 @@
> +/*
> + * arch/arm/mach-rcm-k1879/board-dt.c
;-)
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 2/5] of: Add vendor prefix for RC Module
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
@ 2015-06-30 15:15 ` Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 3/5] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA Andrew Andrianov
` (2 subsequent siblings)
4 siblings, 0 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-30 15:15 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8033919..d172640 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -159,6 +159,7 @@ radxa Radxa
raidsonic RaidSonic Technology GmbH
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
+rcm Research Centre Module
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
ricoh Ricoh Co. Ltd.
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 3/5] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 2/5] of: Add vendor prefix for RC Module Andrew Andrianov
@ 2015-06-30 15:15 ` Andrew Andrianov
2015-06-30 21:07 ` Arnd Bergmann
2015-06-30 15:15 ` [PATCH v2 4/5] ARM: Add defconfig for RC Module K1879XB1YA SoC Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA Andrew Andrianov
4 siblings, 1 reply; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-30 15:15 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts | 146 +++++++++
arch/arm/boot/dts/rcm-k1879xb1.dtsi | 518 ++++++++++++++++++++++++++++++
3 files changed, 665 insertions(+)
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 992736b..1ee1a60 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -454,6 +454,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
+dtb-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1-mb7707.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
diff --git a/arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts b/arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
new file mode 100644
index 0000000..80d5a92
--- /dev/null
+++ b/arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
@@ -0,0 +1,146 @@
+/*
+ * Copyright Promwad inc(C) 2011
+ * Copyright RC Module 2015
+ *
+ * Michail Kurachkin <stelhs@ya.ru>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/dts-v1/;
+#include "rcm-k1879xb1.dtsi"
+
+/ {
+ model = "RC Module MB77.07";
+ compatible = "rcm,mb7707";
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,38400n8 earlyprintk=serial";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ one {
+ label = "mb7707::led1";
+ gpios = <&gpiofj 31 0>; /* LED1 */
+ linux,default-trigger = "heartbeat";
+ };
+ two {
+ label = "mb7707::led2";
+ gpios = <&gpiofj 30 0>; /* LED2 */
+ default-state = "off";
+ };
+ };
+
+ clocks {
+ oscillator_27m: oscillator@27M {
+ /* On-board crystal, 27MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-accuracy = <0>;
+ clock-output-names = "clk_27m";
+ };
+
+ oscillator_48m: oscillator@48M {
+ /* On-board crystal, 48MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "clk_48m";
+ };
+
+ oscillator_74_25m: oscillator@74M {
+ /* On-board crystal, 74.25MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ clock-output-names = "clk_74m";
+ };
+
+ oscillator_12_288m: oscillator@12M {
+ /* On-board crystal, 12.288MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ clock-output-names = "clk_12m";
+ };
+ };
+};
+
+ðernet {
+ local-mac-address = [ EC 17 66 77 07 00 ];
+ status = "okay";
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x1f>;
+ };
+ };
+};
+
+&ssp0 {
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x1>; /* polling mode */
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+};
+
+&i2c0 {
+ speed = <100000>;
+ clock-frequency = <54000000>;
+ status = "okay";
+ hdmi0: hdmi@39 {
+ compatible = "rcm,hdmi";
+ reg = <0x39>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ speed = <100000>;
+ clock-frequency = <54000000>;
+};
+
+&vdu {
+ status = "okay";
+};
+
+&sound {
+ status = "okay";
+ maudio,model = "RC Module MB77.07";
+};
+
+&usbehci {
+ status = "okay";
+};
+
+&video_decoder {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rcm-k1879xb1.dtsi b/arch/arm/boot/dts/rcm-k1879xb1.dtsi
new file mode 100644
index 0000000..4437438
--- /dev/null
+++ b/arch/arm/boot/dts/rcm-k1879xb1.dtsi
@@ -0,0 +1,518 @@
+/*
+ * Copyright Promwad inc 2011
+ * Copyright RC Module 2010-2015
+ *
+ * Michail Kurachkin <stelhs@ya.ru>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/ion,physmem.h>
+
+/ {
+ model = "RC Module K1879XB1YA";
+ compatible = "rcm,k1879xb1ya";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm1176jzf-s", "arm,arm1176";
+ clock-frequency = <324000000>;
+ reg = <0>;
+ d-cache-line-size = <16>;
+ d-cache-size = <16384>;
+ i-cache-line-size = <16>;
+ i-cache-size = <16384>;
+ };
+ };
+
+ clocks {
+ clk_core: clk_core@324M {
+ /* Core 324MHz clock. */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <12>;
+ clock-output-names = "clk_core";
+ };
+
+ clk_axi: clk_axi@162M {
+ /* 162MHz clock */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <6>;
+ clock-output-names = "clk_axi";
+ };
+
+ clk_prf: clk_prf@81M {
+ /* 81MHz clock */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <3>;
+ clock-output-names = "clk_prf";
+ };
+
+ pclk: pclk@54M {
+ /* Reference 54MHz clock */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "apb_pclk";
+ };
+ };
+
+ axi {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xFFFFFFFF>;
+
+ usbehci: ehci@0x10040000 {
+ compatible = "generic-ehci";
+ reg = <0x10040000 0x2000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <3>; /* 35 */
+ status = "disabled";
+ };
+
+ usbohci: ohci@0x10048000 {
+ compatible = "generic-ohci";
+ reg = <0x10048000 0x2000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <3>; /* 35 */
+ status = "disabled";
+ };
+
+ dvb_ci0: dvb-ci@10050000 {
+ compatible = "rcm,mdvbci";
+ reg = <0x10050000 0x10000>;
+ interrupts = <37>;
+ };
+
+ xdmac0: xdmac@10070000 {
+ compatible = "rcm,xdmac";
+ reg = <0x10070000 0x10000>;
+ interrupts = <16 17 18 19 20 21 22 23>;
+ };
+
+ vic0: interrupt-controller@20000000 {
+ reg = <0x20000000 0x10000>;
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0xffffffff>;
+ valid-wakeup-mask = <0x00000000>;
+ };
+
+ vic1: interrupt-controller@20010000 {
+ reg = <0x20010000 0x10000>;
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0xffffffff>;
+ valid-wakeup-mask = <0x00000000>;
+ };
+
+ pinmux: sysconfigh@0x20033084 {
+ compatible = "rcm,pinmux";
+ reg = <0x20033084 0x4>;
+ reg-names = "controlH";
+ };
+
+ crypto_aes: aes@20040000 {
+ compatible = "rcm,mcrypto_aes";
+ reg = <0x20040000 0x80>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ };
+
+ apb_c {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20020000 0x10000>;
+
+ i2c1: i2c@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupt-parent = <&vic0>;
+ interrupts = <28>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ rcm-irq-fixup-id = <1>;
+ status = "disabled";
+ };
+
+ uart0: uart@b000 {
+ device-type = "serial";
+ reg = <0xb000 0x1000>;
+ compatible = "ns8250";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ reg-shift = <2>;
+ };
+
+ uart2: uart@2000 {
+ device-type = "serial";
+ reg = <0x2000 0x1000>;
+ compatible = "ns8250";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vic0>;
+ interrupts = <9>;
+ reg-shift = <2>;
+ };
+
+ ssp0: ssp@e000 {
+ compatible = "arm,pl022", "arm,primecell";
+ bus-id = <0>;
+ reg = <0xe000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0>; /* 32 */
+ interrupt-parent = <&vic1>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ num-cs = <2>;
+ status = "disabled";
+ arm,primecell-periphid = <0x41022>;
+ };
+
+ timer@4000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x4000 0x1000>;
+ interrupts = <4 5>;
+ interrupt-parent = <&vic0>;
+ interrupt-names = "timer0", "timer1";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ wd@5000 {
+ reg = <0x5000 0x1000>;
+ compatible = "arm,sp805", "arm,primecell";
+ interrupts = <6>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ arm,primecell-periphid = <0x141805>;
+ };
+
+ i2c2: i2c@6000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ rcm-irq-fixup-id = <2>;
+ status = "disabled";
+ };
+
+ sci@7000 {
+ reg = <0x7000 0x1000>;
+ compatible = "rcm,sci";
+ interrupts = <11>;
+ };
+
+ exirc@8000 {
+ reg = <0x8000 0x1000>;
+ compatible = "rcm,exirc";
+ interrupts = <24>;
+ };
+
+ gpiofj: gpio@9000 {
+ #gpio-cells = <2>;
+ reg = <0x9000 0x1000>;
+ reg-names = "regs";
+ gpio-controller;
+ compatible = "fujitsu,gpio";
+ };
+
+ gpio_a: gpio@a000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xa000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <31>; /* 63 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ uart1: uart@c000 {
+ device-type = "serial";
+ reg = <0xc000 0x1000>;
+ compatible = "ns8250";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vic0>;
+ interrupts = <8>;
+ reg-shift = <2>;
+ };
+
+ i2c3: i2c@d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupts = <30>;
+ interrupt-parent = <&vic0>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ rcm-irq-fixup-id = <3>;
+ status = "disabled";
+ };
+
+ gpio_3: gpio@f000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xf000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <25>; /* 57 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ apb_d {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20030000 0x10000>;
+
+ ethernet: greth@4000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "aeroflexgaisler,greth";
+ reg = <0x4000 0x1000>;
+ cell-index = <0>;
+ device_type = "network";
+ clocks = <&clk_axi>;
+ clock-names = "clk_axi";
+ interrupt-parent = <&vic1>;
+ interrupts = <2>; /* 34 */
+ status = "disabled";
+
+ mdio {
+ compatible = "greth-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpio_4: gpio@5000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x5000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <26>; /* 58 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio_5: gpio@6000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x6000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <27>; /* 27 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ crypto_des: des@d000 {
+ compatible = "rcm,mcrypto_des";
+ reg = <0xd000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ };
+
+ nand0: nand@f000 {
+ reg = <0xf000 0x1000>;
+ compatible = "rcm,mnand";
+ interrupt-parent = <&vic1>;
+ interrupts = <4>;
+ clocks = <&clk_prf>;
+ clock-names = "clk_prf";
+ };
+ };
+
+ au@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80150000 0x10000>;
+
+ i2s: i2s@0 {
+ compatible = "rcm,i2s";
+ reg = <0 0x40>;
+ interrupts = <18>; /* 50 */
+ interrupt-parent = <&vic1>;
+ };
+ };
+
+ au@1 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80160000 0x10000>;
+
+ spdif: spdif@0 {
+ compatible = "rcm,spdif";
+ reg = <0x0 0x40>;
+ interrupts = <19>; /* 51 */
+ interrupt-parent = <&vic1>;
+ };
+ };
+
+ apb_mult {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80170000 0x10000>;
+
+ i2c0: i2c@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupts = <1>;
+ interrupt-parent = <&vic1>;
+ clocks = <&clk_prf>;
+ clock-names = "clk_prf";
+ reg-shift = <2>;
+ rcm-irq-fixup-id = <0>;
+ status = "disabled";
+ };
+
+ dmac: dmac@0x2800 {
+ /* Missing driver */
+ compatible = "rcm,dmac";
+ reg = <0x2800 0x200>;
+ interrupts = <21>;
+ interrupt-parent = <&vic1>;
+ };
+
+ vdu: vdu@0x3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "rcm,vdu";
+ reg = <0x3000 0x1000>;
+ interrupts = <10>;
+ interrupt-parent = <&vic1>;
+ supported_modes = <0x1FFE>;
+ default_mode = <0x4>;
+ output_flags = <0x200>;
+ axi_osd_param = <0x0f310000>;
+ axi_mvl_param = <0x0f310000>;
+ vbuffer-heap = &ion_em1;
+ status = "disabled";
+ };
+ };
+
+ sound: audio@0x80175000 {
+ compatible = "rcm,audio";
+ reg = <0x80175000 0x40>; /* control */
+ interrupts = <21>;
+ interrupt-parent = <&vic1>;
+ maudio,dmac = <&dmac>;
+ maudio,i2s = <&i2s>;
+ maudio,spdif = <&spdif>;
+ status = "disabled";
+ };
+
+ ion_im0: ion@0x00100000 {
+ compatible = "ion,physmem";
+ reg = <0x00100000 0x40000>;
+ reg-names = "memory";
+ ion-heap-id = <2>;
+ ion-heap-type = <ION_HEAP_TYPE_DMA>;
+ ion-heap-align = <0x10>;
+ ion-heap-name = "IM0";
+ };
+
+ ion_im2: ion@80100000 {
+ compatible = "ion,physmem";
+ reg = <0x80100000 0x40000>;
+ reg-names = "memory";
+ ion-heap-id = <1>;
+ ion-heap-type = <ION_HEAP_TYPE_DMA>;
+ ion-heap-align = <0x10>;
+ ion-heap-name = "IM2";
+ };
+
+ ion_em1: ion@c0000000 {
+ compatible = "ion,physmem";
+ reg = <0xc0000000 0x8000000>;
+ reg-names = "memory";
+ ion-heap-id = <0>;
+ ion-heap-type = <ION_HEAP_TYPE_DMA>;
+ ion-heap-align = <0x10>;
+ ion-heap-name = "EM1";
+ };
+
+ video_decoder: video_decoder@80180000 {
+ compatible = "rcm,msvdhd";
+ reg = <0x80180000 0x20000>;
+ reg-names = "regs";
+ interrupts = <12>; /* 44 */
+ vbuffer-heap = &ion_em1;
+ ibuffer-heap = &ion_im2;
+ interrupt-parent = <&vic1>;
+ status = "disabled";
+ };
+
+ nmcore0 {
+ compatible = "rcm,easynmc";
+ core-name = "K1879-nmc";
+ core-type = "nmc3";
+ device-id = <0>;
+ reg =
+ <0x00140000 0x00080000>, /* IM1 + IM3 */
+ <0x2003c010 0x4>,
+ <0x2003c004 0x4>,
+ <0x2003c034 0x4>,
+ <0x2003c030 0x4>,
+ <0x2003c038 0x4>,
+ <0x2003c03c 0x4>;
+ bank-count = <2>;
+ reg-names =
+ "imem",
+ "reset_reg",
+ "nmi_reg",
+ "hp_clr_reg",
+ "lp_clr_reg",
+ "hp_set_reg",
+ "lp_set_reg";
+ interrupt-parent = <&vic0>;
+ interrupts = <14>, <15>;
+ interrupt-names = "HP", "LP";
+ status = "okay";
+ };
+ };
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v2 3/5] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA
2015-06-30 15:15 ` [PATCH v2 3/5] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA Andrew Andrianov
@ 2015-06-30 21:07 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2015-06-30 21:07 UTC (permalink / raw)
To: Andrew Andrianov
Cc: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Rob Herring,
Pavel Shevchenko, Andrew Andrianov, linux-arm-kernel,
linux-kernel
On Tuesday 30 June 2015 18:15:05 Andrew Andrianov wrote:
> + memory {
> + device_type = "memory";
> + reg = <0x40000000 0x8000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,38400n8 earlyprintk=serial";
> + };
Can you use earlycon instead?
> +
> + clocks {
> + clk_core: clk_core@324M {
> + /* Core 324MHz clock. */
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clocks = <&oscillator_27m>;
> + clock-div = <1>;
> + clock-mult = <12>;
> + clock-output-names = "clk_core";
> + };
Indentation looks wrong.
> + axi {
> + compatible = "arm,amba-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0xFFFFFFFF>;
> +
> + usbehci: ehci@0x10040000 {
> + compatible = "generic-ehci";
> + reg = <0x10040000 0x2000>;
> + interrupt-parent = <&vic1>;
> + interrupts = <3>; /* 35 */
> + status = "disabled";
> + };
> +
Please use standard node names, e.g. "usb" instead of "ehci" and "ohci",
and "serial" instead of "uart".
> +
> + dvb_ci0: dvb-ci@10050000 {
> + compatible = "rcm,mdvbci";
> + reg = <0x10050000 0x10000>;
> + interrupts = <37>;
> + };
> +
> + xdmac0: xdmac@10070000 {
> + compatible = "rcm,xdmac";
> + reg = <0x10070000 0x10000>;
> + interrupts = <16 17 18 19 20 21 22 23>;
> + };
Remove the nodes that don't have an established binding for now.
> + pinmux: sysconfigh@0x20033084 {
> + compatible = "rcm,pinmux";
> + reg = <0x20033084 0x4>;
> + reg-names = "controlH";
> + };
This looks like it's only one register out of a larger area of
random things. Can you use a "syscon" device instead"?
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 4/5] ARM: Add defconfig for RC Module K1879XB1YA SoC
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
` (2 preceding siblings ...)
2015-06-30 15:15 ` [PATCH v2 3/5] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA Andrew Andrianov
@ 2015-06-30 15:15 ` Andrew Andrianov
2015-06-30 15:15 ` [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA Andrew Andrianov
4 siblings, 0 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-30 15:15 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
arch/arm/configs/rcm_k1879xb1ya_defconfig | 2678 +++++++++++++++++++++++++++++
1 file changed, 2678 insertions(+)
create mode 100644 arch/arm/configs/rcm_k1879xb1ya_defconfig
diff --git a/arch/arm/configs/rcm_k1879xb1ya_defconfig b/arch/arm/configs/rcm_k1879xb1ya_defconfig
new file mode 100644
index 0000000..2476436
--- /dev/null
+++ b/arch/arm/configs/rcm_k1879xb1ya_defconfig
@@ -0,0 +1,2678 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 4.1.0-rc8 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION="-shadow1"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_XZ is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_KERNEL_LZ4 is not set
+CONFIG_DEFAULT_HOSTNAME="shadow"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+CONFIG_USELIB=y
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Timers subsystem
+#
+CONFIG_HZ_PERIODIC=y
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_RCU_KTHREAD_PRIO=0
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_MEMCG is not set
+# CONFIG_CGROUP_PERF is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_CFS_BANDWIDTH is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_BPF_SYSCALL is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OLD_SIGACTION=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_INLINE_READ_UNLOCK=y
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_INLINE_WRITE_UNLOCK=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP1 is not set
+
+#
+# Multiple platform selection
+#
+
+#
+# CPU Core family selection
+#
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_MXC is not set
+
+#
+# TI OMAP/AM/DM/DRA Family
+#
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_PICOXCELL is not set
+CONFIG_ARCH_RCM_K1879XB1=y
+# CONFIG_ARCH_WM8750 is not set
+CONFIG_ARM_TIMER_SP804=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_KUSER_HELPERS=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_DMA_MEM_BUFFERABLE is not set
+# CONFIG_ARM_KERNMEM_PERMS is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# CONFIG_ARM_ERRATA_364296 is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_ARM_APPENDED_DTB is not set
+CONFIG_CMDLINE="console=ttyS0"
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_DT_IDLE_STATES=y
+
+#
+# ARM CPU Idle Drivers
+#
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+
+#
+# Power management options
+#
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM is not set
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_NET_IP_TUNNEL is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_GENEVE is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NET_PTP_CLASSIFY is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+CONFIG_HAVE_NET_DSA=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_MMAP is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+# CONFIG_BPF_JIT is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_TEGRA_AHB is not set
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_FENCE_TRACE is not set
+
+#
+# Bus devices
+#
+CONFIG_ARM_CCI=y
+CONFIG_ARM_CCI400_COMMON=y
+CONFIG_ARM_CCI400_PMU=y
+# CONFIG_ARM_CCN is not set
+# CONFIG_BRCMSTB_GISB_ARB is not set
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_DENALI is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+# CONFIG_MTD_SPI_NOR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_FASTMAP=y
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_BLOCK is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+
+#
+# Device Tree and Open Firmware support
+#
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_PMEM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+# CONFIG_SRAM is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_TEAM is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_VXLAN is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NLMON is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+CONFIG_ETHERNET=y
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_ARC_EMAC is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_MACB is not set
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_SYSTEMPORT is not set
+CONFIG_NET_VENDOR_CIRRUS=y
+# CONFIG_CS89x0 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_FARADAY=y
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTGMAC100 is not set
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HIP04_ETH is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_AX88796 is not set
+# CONFIG_ETHOC is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000 is not set
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SMSC=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+CONFIG_NET_VENDOR_STMICRO=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AT803X_PHY is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_RTL8152 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_EM is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_ST_ASC is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CBUS_GPIO is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_NOMADIK is not set
+CONFIG_I2C_OCORES=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_RK3X is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=y
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_SLAVE is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPMI is not set
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+# CONFIG_PTP_1588_CLOCK is not set
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_OF_GPIO=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_DWAPB is not set
+# CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_GRGPIO is not set
+CONFIG_GPIO_PL061=y
+# CONFIG_GPIO_SCH311X is not set
+# CONFIG_GPIO_ZEVIO is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+
+#
+# MFD GPIO expanders
+#
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_POWER_RESET is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MEN_A21_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X is not set
+# CONFIG_MFD_CROS_EC is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
+# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_CONTROLLER_DVB is not set
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_ADV_DEBUG=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_VMALLOC=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Media drivers
+#
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_V4L_TEST_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, frontends)
+#
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
+
+#
+# Audio decoders, processors and mixers
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# Video encoders
+#
+
+#
+# Camera sensor devices
+#
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+
+#
+# Audio/Video compression chips
+#
+
+#
+# Miscellaneous helper chips
+#
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+
+#
+# Direct Rendering Manager
+#
+CONFIG_DRM=y
+# CONFIG_DRM_PTN3460 is not set
+# CONFIG_DRM_PS8622 is not set
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_ARMADA is not set
+# CONFIG_DRM_TILCDC is not set
+# CONFIG_DRM_STI is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=y
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# HD-Audio
+#
+CONFIG_SND_ARM=y
+# CONFIG_SND_ARMAACI is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_UA101=y
+CONFIG_SND_USB_CAIAQ=y
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_USB_6FIRE=y
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CP2112 is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_ICADE is not set
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+CONFIG_HID_NTRIG=y
+# CONFIG_HID_ORTEK is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_HID_PENMOUNT is not set
+CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
+CONFIG_HID_PLANTRONICS=y
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+# CONFIG_SONY_FF is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_RMI is not set
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_HID_TIVO is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THINGM is not set
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FUSBH200_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC2 is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_ISP1760 is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_SIMPLE is not set
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MXUPORT is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_XSENS_MT=m
+CONFIG_USB_SERIAL_WISHBONE=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=y
+CONFIG_USB_EMI26=y
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_EZUSB_FX2=m
+# CONFIG_USB_HSIC_USB3503 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+
+#
+# USB Physical Layer drivers
+#
+# CONFIG_USB_PHY is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_LM355x is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+# CONFIG_LEDS_PM8941_WLED is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_VIRT_DRIVERS is not set
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_MMIO is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_STAGING=y
+# CONFIG_COMEDI is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+# CONFIG_STAGING_MEDIA is not set
+
+#
+# Android
+#
+# CONFIG_ASHMEM is not set
+# CONFIG_ANDROID_TIMED_OUTPUT is not set
+# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
+# CONFIG_SYNC is not set
+CONFIG_ION=y
+# CONFIG_ION_TEST is not set
+# CONFIG_ION_DUMMY is not set
+CONFIG_ION_PHYSMEM=y
+# CONFIG_USB_WPAN_HCD is not set
+# CONFIG_WIMAX_GDM72XX is not set
+# CONFIG_LTE_GDM724X is not set
+# CONFIG_MTD_SPINAND_MT29F is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_DGAP is not set
+# CONFIG_GS_FPGABOOT is not set
+# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
+# CONFIG_FB_TFT is not set
+# CONFIG_CHROME_PLATFORMS is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_CLK_QORIQ is not set
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+
+#
+# Hardware Spinlock drivers
+#
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_MMIO=y
+# CONFIG_ATMEL_PIT is not set
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+# CONFIG_MAILBOX is not set
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+# CONFIG_ARM_SMMU is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+
+#
+# Rpmsg drivers
+#
+
+#
+# SOC (System On Chip) specific Drivers
+#
+# CONFIG_SOC_TI is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_EXTCON is not set
+# CONFIG_MEMORY is not set
+# CONFIG_IIO is not set
+# CONFIG_PWM is not set
+CONFIG_IRQCHIP=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+# CONFIG_IPACK_BUS is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Android
+#
+CONFIG_ANDROID=y
+# CONFIG_ANDROID_BINDER_IPC is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_OVERLAY_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_SWAP is not set
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_GRACE_PERIOD=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+# CONFIG_GDB_SCRIPTS is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+CONFIG_PAGE_EXTENSION=y
+CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_PAGE_POISONING=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+# CONFIG_LOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_TIMER_STATS is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_STACKTRACE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+CONFIG_RCU_TRACE=y
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_PTDUMP is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_SEMIHOSTING is not set
+CONFIG_DEBUG_LL_UART_8250=y
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_BCM63XX is not set
+CONFIG_DEBUG_UART_PHYS=0x2002b000
+CONFIG_DEBUG_UART_VIRT=0xf802b000
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_EARLY_PRINTK=y
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_MCRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_CMAC is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32 is not set
+# CONFIG_CRYPTO_CRCT10DIF is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_DRBG_MENU is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+# CONFIG_ARM_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+# CONFIG_AVERAGE is not set
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+CONFIG_LIBFDT=y
+CONFIG_OID_REGISTRY=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+# CONFIG_VIRTUALIZATION is not set
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA
2015-06-30 15:15 ` [PATCH v2 0/5] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
` (3 preceding siblings ...)
2015-06-30 15:15 ` [PATCH v2 4/5] ARM: Add defconfig for RC Module K1879XB1YA SoC Andrew Andrianov
@ 2015-06-30 15:15 ` Andrew Andrianov
2015-06-30 16:24 ` Sudeep Holla
2015-06-30 21:09 ` Arnd Bergmann
4 siblings, 2 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-30 15:15 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
drivers/cpuidle/Kconfig.arm | 6 +++++
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/cpuidle-rcm-k1879xb1.c | 48 ++++++++++++++++++++++++++++++++++
3 files changed, 55 insertions(+)
create mode 100644 drivers/cpuidle/cpuidle-rcm-k1879xb1.c
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 21340e0..988bfa3 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -74,3 +74,9 @@ config ARM_MVEBU_V7_CPUIDLE
depends on ARCH_MVEBU && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
+
+config ARM_RCM_K1879XB1_CPUIDLE
+ bool "CPU Idle Driver for RC Module's K1879XB1YA SoC"
+ depends on ARCH_RCM_K1879XB1 && !ARM64
+ help
+ Select this to enable cpuidle on K1879XB1YA SoC.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 3ba81b1..71b7e16 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o
obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o
obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o
obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o
+obj-$(CONFIG_ARM_RCM_K1879XB1_CPUIDLE) += cpuidle-rcm-k1879xb1.o
obj-$(CONFIG_ARM_CPUIDLE) += cpuidle-arm.o
###############################################################################
diff --git a/drivers/cpuidle/cpuidle-rcm-k1879xb1.c b/drivers/cpuidle/cpuidle-rcm-k1879xb1.c
new file mode 100644
index 0000000..7c621b6
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-rcm-k1879xb1.c
@@ -0,0 +1,48 @@
+/*
+ * CPU idle for RC Module K1879XB1YA SoC
+ *
+ * Copyright (C) 2015 RC Module.
+ * http://www.module.ru/
+ *
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * Based on Davinci CPU idle code
+ * (arch/arm/mach-davinci/cpuidle.c)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/cpuidle.h>
+
+/*
+ * We only enable WFI here, since DDR will enter self-refresh
+ * on it's own when it can (bootloader takes care to configure that)
+ */
+
+static struct cpuidle_driver rcm_idle_driver = {
+ .name = "rcm_k1879xb1_idle",
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .state_count = 1,
+};
+
+static int __init rcm_cpuidle_probe(struct platform_device *pdev)
+{
+ return cpuidle_register(&rcm_idle_driver, NULL);
+}
+
+static struct platform_driver rcm_cpuidle_driver = {
+ .driver = {
+ .name = "cpuidle-rcm-k1879xb1",
+ },
+};
+
+static int __init rcm_cpuidle_init(void)
+{
+ return platform_driver_probe(&rcm_cpuidle_driver, rcm_cpuidle_probe);
+}
+device_initcall(rcm_cpuidle_init);
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA
2015-06-30 15:15 ` [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA Andrew Andrianov
@ 2015-06-30 16:24 ` Sudeep Holla
2015-06-30 21:09 ` Arnd Bergmann
1 sibling, 0 replies; 20+ messages in thread
From: Sudeep Holla @ 2015-06-30 16:24 UTC (permalink / raw)
To: Andrew Andrianov
Cc: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Arnd Bergmann,
Rob Herring, Sudeep Holla, Andrew Andrianov, pshevch,
linux-arm-kernel, linux-kernel
On 30/06/15 16:15, Andrew Andrianov wrote:
> Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
> ---
> drivers/cpuidle/Kconfig.arm | 6 +++++
> drivers/cpuidle/Makefile | 1 +
> drivers/cpuidle/cpuidle-rcm-k1879xb1.c | 48 ++++++++++++++++++++++++++++++++++
> 3 files changed, 55 insertions(+)
> create mode 100644 drivers/cpuidle/cpuidle-rcm-k1879xb1.c
>
> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
> index 21340e0..988bfa3 100644
> --- a/drivers/cpuidle/Kconfig.arm
> +++ b/drivers/cpuidle/Kconfig.arm
> @@ -74,3 +74,9 @@ config ARM_MVEBU_V7_CPUIDLE
> depends on ARCH_MVEBU && !ARM64
> help
> Select this to enable cpuidle on Armada 370, 38x and XP processors.
> +
> +config ARM_RCM_K1879XB1_CPUIDLE
> + bool "CPU Idle Driver for RC Module's K1879XB1YA SoC"
> + depends on ARCH_RCM_K1879XB1 && !ARM64
> + help
> + Select this to enable cpuidle on K1879XB1YA SoC.
> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> index 3ba81b1..71b7e16 100644
> --- a/drivers/cpuidle/Makefile
> +++ b/drivers/cpuidle/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o
> obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o
> obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o
> obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o
> +obj-$(CONFIG_ARM_RCM_K1879XB1_CPUIDLE) += cpuidle-rcm-k1879xb1.o
> obj-$(CONFIG_ARM_CPUIDLE) += cpuidle-arm.o
>
> ###############################################################################
> diff --git a/drivers/cpuidle/cpuidle-rcm-k1879xb1.c b/drivers/cpuidle/cpuidle-rcm-k1879xb1.c
> new file mode 100644
> index 0000000..7c621b6
> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-rcm-k1879xb1.c
> @@ -0,0 +1,48 @@
> +/*
> + * CPU idle for RC Module K1879XB1YA SoC
> + *
> + * Copyright (C) 2015 RC Module.
> + * http://www.module.ru/
> + *
> + * Andrew Andrianov <andrew@ncrmnt.org>
> + *
> + * Based on Davinci CPU idle code
> + * (arch/arm/mach-davinci/cpuidle.c)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/cpuidle.h>
> +#include <asm/cpuidle.h>
> +
> +/*
> + * We only enable WFI here, since DDR will enter self-refresh
> + * on it's own when it can (bootloader takes care to configure that)
> + */
> +
> +static struct cpuidle_driver rcm_idle_driver = {
> + .name = "rcm_k1879xb1_idle",
> + .states[0] = ARM_CPUIDLE_WFI_STATE,
Do you plan to add more states in future ?
Otherwise default_idle_call will be sufficient to enter WFI
and you need not register any cpuidle driver.
Regards,
Sudeep
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA
2015-06-30 15:15 ` [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA Andrew Andrianov
2015-06-30 16:24 ` Sudeep Holla
@ 2015-06-30 21:09 ` Arnd Bergmann
2015-06-30 21:20 ` Andrew
1 sibling, 1 reply; 20+ messages in thread
From: Arnd Bergmann @ 2015-06-30 21:09 UTC (permalink / raw)
To: Andrew Andrianov
Cc: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Rob Herring,
Pavel Shevchenko, Andrew Andrianov, linux-arm-kernel,
linux-kernel
On Tuesday 30 June 2015 18:15:07 Andrew Andrianov wrote:
> +static struct platform_driver rcm_cpuidle_driver = {
> + .driver = {
> + .name = "cpuidle-rcm-k1879xb1",
> + },
> +};
> +
>
Who creates this device?
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v2 5/5] cpuidle: ARM: Add cpuidle driver for K1879XB1YA
2015-06-30 21:09 ` Arnd Bergmann
@ 2015-06-30 21:20 ` Andrew
0 siblings, 0 replies; 20+ messages in thread
From: Andrew @ 2015-06-30 21:20 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Pawel Moll, Mark Rutland, Rafael J. Wysocki, Daniel Lezcano,
Ian Campbell, Kumar Gala, Russell King, Rob Herring,
Pavel Shevchenko, Andrew Andrianov, linux-arm-kernel,
linux-kernel
Arnd Bergmann писал 01.07.2015 00:09:
> On Tuesday 30 June 2015 18:15:07 Andrew Andrianov wrote:
>> +static struct platform_driver rcm_cpuidle_driver = {
>> + .driver = {
>> + .name = "cpuidle-rcm-k1879xb1",
>> + },
>> +};
>> +
>>
>
> Who creates this device?
>
> Arnd
Sorry, you can omit about this cpuidle driver.
We initially planned a second (WFI + DDR self-refresh) state, but
as DDR2 controller enters SR on it's own when needed, so it's only
WFI left here and it doesn't need a special driver.
--
Regards,
Andrew
RC Module :: http://module.ru
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 2/4] of: Add vendor prefix for RC Module
2015-06-23 15:50 [PATCH 0/4] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
2015-06-23 15:50 ` [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
@ 2015-06-23 15:50 ` Andrew Andrianov
2015-06-23 15:50 ` [PATCH 3/4] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA Andrew Andrianov
2015-06-23 15:50 ` [PATCH 4/4] ARM: Add defconfig for RC Module K1879XB1YA SoC Andrew Andrianov
3 siblings, 0 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-23 15:50 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Arnd Bergmann, Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8033919..d172640 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -159,6 +159,7 @@ radxa Radxa
raidsonic RaidSonic Technology GmbH
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
+rcm Research Centre Module
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
ricoh Ricoh Co. Ltd.
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 3/4] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA
2015-06-23 15:50 [PATCH 0/4] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
2015-06-23 15:50 ` [PATCH 1/4] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Andrew Andrianov
2015-06-23 15:50 ` [PATCH 2/4] of: Add vendor prefix for RC Module Andrew Andrianov
@ 2015-06-23 15:50 ` Andrew Andrianov
2015-06-23 15:50 ` [PATCH 4/4] ARM: Add defconfig for RC Module K1879XB1YA SoC Andrew Andrianov
3 siblings, 0 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-23 15:50 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Arnd Bergmann, Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts | 158 +++++++++
arch/arm/boot/dts/rcm-k1879xb1.dtsi | 521 ++++++++++++++++++++++++++++++
4 files changed, 681 insertions(+)
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1.dtsi
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2de4d2a..cfab436 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -628,6 +628,7 @@ config ARCH_RCM_K1879XB1
select SPARSE_IRQ
select GENERIC_GPIO
select COMMON_CLK
+ select ARM_TIMER_SP804
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 992736b..1ee1a60 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -454,6 +454,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
+dtb-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1-mb7707.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
diff --git a/arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts b/arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
new file mode 100644
index 0000000..b4b4b0a
--- /dev/null
+++ b/arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright Promwad inc(C) 2011
+ * Copyright RC Module 2015
+ *
+ * Michail Kurachkin <stelhs@ya.ru>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/dts-v1/;
+#include "rcm-k1879xb1.dtsi"
+
+/ {
+ model = "RC Module MB77.07";
+ compatible = "rcm,mb7707";
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,38400n8 earlyprintk=serial";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ one {
+ label = "mb7707::led1";
+ gpios = <&gpiofj 31 0>; /* LED1 */
+ linux,default-trigger = "heartbeat";
+ };
+ two {
+ label = "mb7707::led2";
+ gpios = <&gpiofj 30 0>; /* LED2 */
+ default-state = "off";
+ };
+ };
+
+ clocks {
+
+ oscillator_27m: oscillator@27M {
+ /* On-board crystal, 27MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-accuracy = <0>;
+ clock-output-names = "clk_27m";
+ };
+
+ oscillator_48m: oscillator@48M {
+ /* On-board crystal, 48MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "clk_48m";
+ };
+
+ oscillator_74_25m: oscillator@74M {
+ /* On-board crystal, 74.25MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ clock-output-names = "clk_74m";
+ };
+
+ oscillator_12_288m: oscillator@12M {
+ /* On-board crystal, 12.288MHz clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ clock-output-names = "clk_12m";
+ };
+ };
+
+ axi {
+
+ pinmux: sysconfigh@0x20033084 {
+ /* DVB, TS1, TS2, NAND; 0 = GPIO, 1 = peripheral */
+ settings = <0 0 0 1>;
+ };
+
+ apb_d {
+
+ ethernet: greth@4000 {
+ local-mac-address = [ EC 17 66 77 07 00 ];
+ status = "okay";
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x1f>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&ssp0 {
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x1>; /* polling mode */
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+};
+
+&i2c0 {
+ speed = <100000>;
+ clock-frequency = <54000000>;
+ status = "okay";
+ hdmi0: hdmi@39 {
+ compatible = "rcm,hdmi";
+ reg = <0x39>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ speed = <100000>;
+ clock-frequency = <54000000>;
+};
+
+&vdu {
+ status = "okay";
+};
+
+&sound {
+ status = "okay";
+ maudio,model = "RC Module MB77.07";
+};
+
+&usbehci {
+ status = "okay";
+};
+
+&video_decoder {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rcm-k1879xb1.dtsi b/arch/arm/boot/dts/rcm-k1879xb1.dtsi
new file mode 100644
index 0000000..5fd8239
--- /dev/null
+++ b/arch/arm/boot/dts/rcm-k1879xb1.dtsi
@@ -0,0 +1,521 @@
+/*
+ * Copyright Promwad inc (C) 2011
+ * Copyright RC Module 2010-2015
+ *
+ * Michail Kurachkin <stelhs@ya.ru>
+ * Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/ion,physmem.h>
+
+/ {
+ model = "RC Module K1879XB1YA";
+ compatible = "rcm,k1879xb1ya";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm1176jzf-s", "arm,arm1176";
+ clock-frequency = <324000000>;
+ reg = <0>;
+ d-cache-line-size = <16>;
+ d-cache-size = <16384>;
+ i-cache-line-size = <16>;
+ i-cache-size = <16384>;
+ };
+ };
+
+ clocks {
+ clk_core: clk_core@324M {
+ /* Core 324MHz clock. */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <12>;
+ clock-output-names = "clk_core";
+ };
+
+ clk_axi: clk_axi@162M {
+ /* 162MHz clock */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <6>;
+ clock-output-names = "clk_axi";
+ };
+
+ clk_prf: clk_prf@81M {
+ /* 81MHz clock */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <3>;
+ clock-output-names = "clk_prf";
+ };
+
+ pclk: pclk@54M {
+ /* Reference 54MHz clock */
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&oscillator_27m>;
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "apb_pclk";
+ };
+ };
+
+ axi {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xFFFFFFFF>;
+
+ usbehci: ehci@0x10040000 {
+ compatible = "generic-ehci";
+ reg = <0x10040000 0x2000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <3>; /* 35 */
+ status = "disabled";
+ };
+
+ usbohci: ohci@0x10048000 {
+ compatible = "generic-ohci";
+ reg = <0x10048000 0x2000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <3>; /* 35 */
+ status = "disabled";
+ };
+
+ dvb_ci0: dvb-ci@10050000 {
+ compatible = "rcm,mdvbci";
+ reg = <0x10050000 0x10000>;
+ interrupts = <37>;
+ };
+
+ xdmac0: xdmac@10070000 {
+ compatible = "rcm,xdmac";
+ reg = <0x10070000 0x10000>;
+ interrupts = <16 17 18 19 20 21 22 23>;
+ };
+
+ vic0: interrupt-controller@20000000 {
+ reg = <0x20000000 0x10000>;
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0xffffffff>;
+ valid-wakeup-mask = <0x00000000>;
+ };
+
+ vic1: interrupt-controller@20010000 {
+ reg = <0x20010000 0x10000>;
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0xffffffff>;
+ valid-wakeup-mask = <0x00000000>;
+ };
+
+ pinmux: sysconfigh@0x20033084 {
+ compatible = "rcm,pinmux";
+ reg = <0x20033084 0x4>;
+ reg-names = "controlH";
+ };
+
+ crypto_aes: aes@20040000 {
+ compatible = "rcm,mcrypto_aes";
+ reg = <0x20040000 0x80>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ };
+
+ apb_c {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20020000 0x10000>;
+
+ i2c1: i2c@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupt-parent = <&vic0>;
+ interrupts = <28>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart0: uart@b000 {
+ device-type = "serial";
+ reg = <0xb000 0x1000>;
+ compatible = "ns8250";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ reg-shift = <2>;
+ };
+
+ uart2: uart@2000 {
+ device-type = "serial";
+ reg = <0x2000 0x1000>;
+ compatible = "ns8250";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vic0>;
+ interrupts = <9>;
+ reg-shift = <2>;
+ };
+
+ ssp0: ssp@e000 {
+ compatible = "arm,pl022", "arm,primecell";
+ bus-id = <0>;
+ reg = <0xe000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0>; /* 32 */
+ interrupt-parent = <&vic1>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ num-cs = <2>;
+ status = "disabled";
+ arm,primecell-periphid = <0x41022>;
+ };
+
+ timer@4000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x4000 0x1000>;
+ interrupts = <4 5>;
+ interrupt-parent = <&vic0>;
+ interrupt-names = "timer0", "timer1";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ wd@5000 {
+ reg = <0x5000 0x1000>;
+ compatible = "arm,sp805", "arm,primecell";
+ interrupts = <6>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ arm,primecell-periphid = <0x141805>;
+ };
+
+ i2c2: i2c@6000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ sci@7000 {
+ reg = <0x7000 0x1000>;
+ compatible = "rcm,sci";
+ interrupts = <11>;
+ };
+
+ exirc@8000 {
+ reg = <0x8000 0x1000>;
+ compatible = "rcm,exirc";
+ interrupts = <24>;
+ };
+
+ gpiofj: gpio@9000 {
+ #gpio-cells = <2>;
+ reg = <0x9000 0x1000>;
+ reg-names = "regs";
+ gpio-controller;
+ compatible = "fujitsu,gpio";
+ };
+
+ gpio_a: gpio@a000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xa000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <31>; /* 63 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ uart1: uart@c000 {
+ device-type = "serial";
+ reg = <0xc000 0x1000>;
+ compatible = "ns8250";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ interrupt-parent = <&vic0>;
+ interrupts = <8>;
+ reg-shift = <2>;
+ };
+
+ i2c3: i2c@d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupts = <30>;
+ interrupt-parent = <&vic0>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ gpio_3: gpio@f000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xf000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <25>; /* 57 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ apb_d {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20030000 0x10000>;
+
+ ethernet: greth@4000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "aeroflexgaisler,greth";
+ reg = <0x4000 0x1000>;
+ cell-index = <0>;
+ device_type = "network";
+ clocks = <&clk_axi>;
+ clock-names = "clk_axi";
+ interrupt-parent = <&vic1>;
+ interrupts = <2>; /* 34 */
+ status = "disabled";
+
+ mdio {
+ compatible = "greth-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpio_4: gpio@5000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x5000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <26>; /* 58 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio_5: gpio@6000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x6000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <27>; /* 27 */
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ crypto_des: des@d000 {
+ compatible = "rcm,mcrypto_des";
+ reg = <0xd000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ };
+
+ nand0: nand@f000 {
+ reg = <0xf000 0x1000>;
+ compatible = "rcm,mnand";
+ interrupt-parent = <&vic1>;
+ interrupts = <4>;
+ clocks = <&clk_prf>;
+ clock-names = "clk_prf";
+ };
+ };
+
+ au@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80150000 0x10000>;
+
+ i2s: i2s@0 {
+ compatible = "rcm,i2s";
+ reg = <0 0x40>;
+ interrupts = <18>; /* 50 */
+ interrupt-parent = <&vic1>;
+ };
+ };
+
+ au@1 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80160000 0x10000>;
+
+ spdif: spdif@0 {
+ compatible = "rcm,spdif";
+ reg = <0x0 0x40>;
+ interrupts = <19>; /* 51 */
+ interrupt-parent = <&vic1>;
+ };
+ };
+
+ apb_mult {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80170000 0x10000>;
+
+ i2c0: i2c@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1000 0x1000>;
+ compatible = "rcm,i2c-ocores";
+ interrupts = <1>;
+ interrupt-parent = <&vic1>;
+ clocks = <&clk_prf>;
+ clock-names = "clk_prf";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ dmac: dmac@0x2800 {
+ /* Missing driver */
+ compatible = "rcm,dmac";
+ reg = <0x2800 0x200>;
+ interrupts = <21>;
+ interrupt-parent = <&vic1>;
+ };
+
+ vdu: vdu@0x3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "rcm,vdu";
+ reg = <0x3000 0x1000>;
+ interrupts = <10>;
+ interrupt-parent = <&vic1>;
+ supported_modes = <0x1FFE>;
+ default_mode = <0x4>;
+ output_flags = <0x200>;
+ axi_osd_param = <0x0f310000>;
+ axi_mvl_param = <0x0f310000>;
+ vbuffer-heap = &ion_em1;
+ status = "disabled";
+ };
+ };
+
+ sound: audio@0x80175000 {
+ compatible = "rcm,audio";
+ reg = <0x80175000 0x40>; /* control */
+ interrupts = <21>;
+ interrupt-parent = <&vic1>;
+ maudio,dmac = <&dmac>;
+ maudio,i2s = <&i2s>;
+ maudio,spdif = <&spdif>;
+ status = "disabled";
+ };
+
+ ion_im0: ion@0x00100000 {
+ compatible = "ion,physmem";
+ reg = <0x00100000 0x40000>;
+ reg-names = "memory";
+ ion-heap-id = <2>;
+ ion-heap-type = <ION_HEAP_TYPE_DMA>;
+ ion-heap-align = <0x10>;
+ ion-heap-name = "IM0";
+ };
+
+ ion_im2: ion@80100000 {
+ compatible = "ion,physmem";
+ reg = <0x80100000 0x40000>;
+ reg-names = "memory";
+ ion-heap-id = <1>;
+ ion-heap-type = <ION_HEAP_TYPE_DMA>;
+ ion-heap-align = <0x10>;
+ ion-heap-name = "IM2";
+ };
+
+ ion_em1: ion@c0000000 {
+ compatible = "ion,physmem";
+ reg = <0xc0000000 0x8000000>;
+ reg-names = "memory";
+ ion-heap-id = <0>;
+ ion-heap-type = <ION_HEAP_TYPE_DMA>;
+ ion-heap-align = <0x10>;
+ ion-heap-name = "EM1";
+ };
+
+ video_decoder: video_decoder@80180000 {
+ compatible = "rcm,msvdhd";
+ reg = <0x80180000 0x20000>;
+ reg-names = "regs";
+ interrupts = <12>; /* 44 */
+ vbuffer-heap = &ion_em1;
+ ibuffer-heap = &ion_im2;
+ interrupt-parent = <&vic1>;
+ status = "disabled";
+ };
+
+ nmcore0 {
+ compatible = "rcm,easynmc";
+ core-name = "K1879-nmc";
+ core-type = "nmc3";
+ device-id = <0>;
+ reg =
+ <0x00140000 0x00080000>, /* IM1 + IM3 */
+ <0x2003c010 0x4>,
+ <0x2003c004 0x4>,
+ <0x2003c034 0x4>,
+ <0x2003c030 0x4>,
+ <0x2003c038 0x4>,
+ <0x2003c03c 0x4>;
+ bank-count = <2>;
+ reg-names =
+ "imem",
+ "reset_reg",
+ "nmi_reg",
+ "hp_clr_reg",
+ "lp_clr_reg",
+ "hp_set_reg",
+ "lp_set_reg";
+ interrupt-parent = <&vic0>;
+ interrupts = <14>, <15>;
+ interrupt-names = "HP", "LP";
+ status = "okay";
+ };
+ };
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH 4/4] ARM: Add defconfig for RC Module K1879XB1YA SoC
2015-06-23 15:50 [PATCH 0/4] [New SoC] Add support for RC Module's K1879XB1YA Andrew Andrianov
` (2 preceding siblings ...)
2015-06-23 15:50 ` [PATCH 3/4] ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA Andrew Andrianov
@ 2015-06-23 15:50 ` Andrew Andrianov
3 siblings, 0 replies; 20+ messages in thread
From: Andrew Andrianov @ 2015-06-23 15:50 UTC (permalink / raw)
To: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
Arnd Bergmann, Rob Herring
Cc: Andrew Andrianov, Pavel Shevchenko, Andrew Andrianov,
linux-arm-kernel, linux-kernel
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
---
arch/arm/configs/rcm_k1879xb1ya_defconfig | 2638 +++++++++++++++++++++++++++++
1 file changed, 2638 insertions(+)
create mode 100644 arch/arm/configs/rcm_k1879xb1ya_defconfig
diff --git a/arch/arm/configs/rcm_k1879xb1ya_defconfig b/arch/arm/configs/rcm_k1879xb1ya_defconfig
new file mode 100644
index 0000000..e49f5c4
--- /dev/null
+++ b/arch/arm/configs/rcm_k1879xb1ya_defconfig
@@ -0,0 +1,2638 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 4.1.0-rc8 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION="-shadow1"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_XZ is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_KERNEL_LZ4 is not set
+CONFIG_DEFAULT_HOSTNAME="shadow"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+CONFIG_USELIB=y
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Timers subsystem
+#
+CONFIG_HZ_PERIODIC=y
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_RCU_KTHREAD_PRIO=0
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_MEMCG is not set
+# CONFIG_CGROUP_PERF is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_CFS_BANDWIDTH is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_BPF_SYSCALL is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OLD_SIGACTION=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_INLINE_READ_UNLOCK=y
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_INLINE_WRITE_UNLOCK=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_MULTIPLATFORM is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_RCM_K1879XB1=y
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARM_TIMER_SP804=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_KUSER_HELPERS=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_DMA_MEM_BUFFERABLE is not set
+# CONFIG_ARM_KERNMEM_PERMS is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# CONFIG_ARM_ERRATA_364296 is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_ARM_APPENDED_DTB is not set
+CONFIG_CMDLINE="console=ttyS0"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# CPU Idle
+#
+# CONFIG_CPU_IDLE is not set
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+
+#
+# Power management options
+#
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_NET_IP_TUNNEL is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_GENEVE is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NET_PTP_CLASSIFY is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+CONFIG_HAVE_NET_DSA=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_MMAP is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+# CONFIG_BPF_JIT is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_TEGRA_AHB is not set
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_FENCE_TRACE is not set
+
+#
+# Bus devices
+#
+CONFIG_ARM_CCI=y
+CONFIG_ARM_CCI400_COMMON=y
+CONFIG_ARM_CCI400_PMU=y
+# CONFIG_ARM_CCN is not set
+# CONFIG_BRCMSTB_GISB_ARB is not set
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_DENALI is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+# CONFIG_MTD_SPI_NOR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_FASTMAP=y
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_BLOCK is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+
+#
+# Device Tree and Open Firmware support
+#
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_PMEM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+# CONFIG_SRAM is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_TEAM is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_VXLAN is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NLMON is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+CONFIG_ETHERNET=y
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_ARC_EMAC is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_MACB is not set
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_SYSTEMPORT is not set
+CONFIG_NET_VENDOR_CIRRUS=y
+# CONFIG_CS89x0 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_FARADAY=y
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTGMAC100 is not set
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HIP04_ETH is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_AX88796 is not set
+# CONFIG_ETHOC is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000 is not set
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SMSC=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+CONFIG_NET_VENDOR_STMICRO=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AT803X_PHY is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_RTL8152 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_EM is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_ST_ASC is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CBUS_GPIO is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_NOMADIK is not set
+CONFIG_I2C_OCORES=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_RK3X is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=y
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_SLAVE is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_OC_TINY is not set
+CONFIG_SPI_PL022=y
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPMI is not set
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+# CONFIG_PTP_1588_CLOCK is not set
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_OF_GPIO=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_DWAPB is not set
+# CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_GRGPIO is not set
+CONFIG_GPIO_PL061=y
+# CONFIG_GPIO_SCH311X is not set
+# CONFIG_GPIO_ZEVIO is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+
+#
+# MFD GPIO expanders
+#
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_POWER_RESET is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_XILINX_WATCHDOG is not set
+CONFIG_ARM_SP805_WATCHDOG=y
+# CONFIG_CADENCE_WATCHDOG is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MEN_A21_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X is not set
+# CONFIG_MFD_CROS_EC is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
+# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_CONTROLLER_DVB is not set
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_ADV_DEBUG=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_VMALLOC=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Media drivers
+#
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_V4L_TEST_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, frontends)
+#
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
+
+#
+# Audio decoders, processors and mixers
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# Video encoders
+#
+
+#
+# Camera sensor devices
+#
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+
+#
+# Audio/Video compression chips
+#
+
+#
+# Miscellaneous helper chips
+#
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+
+#
+# Direct Rendering Manager
+#
+CONFIG_DRM=y
+# CONFIG_DRM_PTN3460 is not set
+# CONFIG_DRM_PS8622 is not set
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_ARMADA is not set
+# CONFIG_DRM_TILCDC is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=y
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# HD-Audio
+#
+CONFIG_SND_ARM=y
+# CONFIG_SND_ARMAACI is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_UA101=y
+CONFIG_SND_USB_CAIAQ=y
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_USB_6FIRE=y
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CP2112 is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+CONFIG_HID_KYE=y
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_ICADE is not set
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+CONFIG_HID_NTRIG=y
+# CONFIG_HID_ORTEK is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_HID_PENMOUNT is not set
+CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
+CONFIG_HID_PLANTRONICS=y
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+# CONFIG_SONY_FF is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_RMI is not set
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_HID_TIVO is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_HID_THINGM is not set
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FUSBH200_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC2 is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_ISP1760 is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_SIMPLE is not set
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_F81232=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_METRO=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MXUPORT is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_XSENS_MT=m
+CONFIG_USB_SERIAL_WISHBONE=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_QT2=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=y
+CONFIG_USB_EMI26=y
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_EZUSB_FX2=m
+# CONFIG_USB_HSIC_USB3503 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+
+#
+# USB Physical Layer drivers
+#
+# CONFIG_USB_PHY is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_LM355x is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+# CONFIG_LEDS_PM8941_WLED is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_VIRT_DRIVERS is not set
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_MMIO is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_STAGING=y
+# CONFIG_COMEDI is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+# CONFIG_STAGING_MEDIA is not set
+
+#
+# Android
+#
+# CONFIG_ASHMEM is not set
+# CONFIG_ANDROID_TIMED_OUTPUT is not set
+# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
+# CONFIG_SYNC is not set
+CONFIG_ION=y
+# CONFIG_ION_TEST is not set
+# CONFIG_ION_DUMMY is not set
+CONFIG_ION_PHYSMEM=y
+# CONFIG_USB_WPAN_HCD is not set
+# CONFIG_WIMAX_GDM72XX is not set
+# CONFIG_LTE_GDM724X is not set
+# CONFIG_MTD_SPINAND_MT29F is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_DGAP is not set
+# CONFIG_GS_FPGABOOT is not set
+# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
+# CONFIG_FB_TFT is not set
+# CONFIG_CHROME_PLATFORMS is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_CLK_QORIQ is not set
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+
+#
+# Hardware Spinlock drivers
+#
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_MMIO=y
+# CONFIG_ATMEL_PIT is not set
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+# CONFIG_MAILBOX is not set
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+# CONFIG_ARM_SMMU is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+
+#
+# Rpmsg drivers
+#
+
+#
+# SOC (System On Chip) specific Drivers
+#
+# CONFIG_SOC_TI is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_EXTCON is not set
+# CONFIG_MEMORY is not set
+# CONFIG_IIO is not set
+# CONFIG_PWM is not set
+CONFIG_IRQCHIP=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+# CONFIG_IPACK_BUS is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Android
+#
+CONFIG_ANDROID=y
+# CONFIG_ANDROID_BINDER_IPC is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_OVERLAY_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_SWAP is not set
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_GRACE_PERIOD=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+# CONFIG_GDB_SCRIPTS is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+CONFIG_PAGE_EXTENSION=y
+CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_PAGE_POISONING=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+# CONFIG_LOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_TIMER_STATS is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_STACKTRACE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+CONFIG_RCU_TRACE=y
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_PTDUMP is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_SEMIHOSTING is not set
+CONFIG_DEBUG_LL_UART_8250=y
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_BCM63XX is not set
+CONFIG_DEBUG_UART_PHYS=0x2002b000
+CONFIG_DEBUG_UART_VIRT=0xf802b000
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+CONFIG_EARLY_PRINTK=y
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_MCRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_CMAC is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32 is not set
+# CONFIG_CRYPTO_CRCT10DIF is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_DRBG_MENU is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+# CONFIG_ARM_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+# CONFIG_AVERAGE is not set
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+CONFIG_LIBFDT=y
+CONFIG_OID_REGISTRY=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_VIRTUALIZATION is not set
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread