linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: am335x-phycore-som: Move NAND partition table into board files
@ 2015-08-07  9:09 Matthias Klein
  2015-08-11 10:04 ` Teresa Remmet
  0 siblings, 1 reply; 2+ messages in thread
From: Matthias Klein @ 2015-08-07  9:09 UTC (permalink / raw)
  To: tony, linux-omap, linux-arm-kernel, linux-kernel, support; +Cc: matthias.klein

Partitions which are defined in the som file can not be deleted in the
board file.

Signed-off-by: Matthias Klein <matthias.klein@optimeas.de>
---
 arch/arm/boot/dts/am335x-phycore-som.dtsi | 37 -------------------------
 arch/arm/boot/dts/am335x-wega.dtsi        | 45 +++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 4d28fc3..8f12bd54 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -189,43 +189,6 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-
-		partition@0 {
-			label = "xload";
-			reg = <0x0 0x20000>;
-		};
-		partition@1 {
-			label = "xload_backup1";
-			reg = <0x20000 0x20000>;
-		};
-		partition@2 {
-			label = "xload_backup2";
-			reg = <0x40000 0x20000>;
-		};
-		partition@3 {
-			label = "xload_backup3";
-			reg = <0x60000 0x20000>;
-		};
-		partition@4 {
-			label = "barebox";
-			reg = <0x80000 0x80000>;
-		};
-		partition@5 {
-			label = "bareboxenv";
-			reg = <0x100000 0x40000>;
-		};
-		partition@6 {
-			label = "oftree";
-			reg = <0x140000 0x40000>;
-		};
-		partition@7 {
-			label = "kernel";
-			reg = <0x180000 0x800000>;
-		};
-		partition@8 {
-			label = "root";
-			reg = <0x980000 0x0>;
-		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 5e541bd..945a41d 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -149,3 +149,48 @@
 &usb1_phy {
 	status = "okay";
 };
+
+&nandflash {
+	partition@0 {
+		label = "xload";
+		reg = <0x0 0x20000>;
+	};
+
+	partition@1 {
+		label = "xload_backup1";
+		reg = <0x20000 0x20000>;
+	};
+
+	partition@2 {
+		label = "xload_backup2";
+		reg = <0x40000 0x20000>;
+	};
+
+	partition@3 {
+		label = "xload_backup3";
+		reg = <0x60000 0x20000>;
+	};
+
+	partition@4 {
+		label = "barebox";
+		reg = <0x80000 0x80000>;
+	};
+
+	partition@5 {
+		label = "bareboxenv";
+		reg = <0x100000 0x40000>;
+	};
+
+	partition@6 {
+		label = "oftree";
+		reg = <0x140000 0x40000>;
+	};
+	partition@7 {
+		label = "kernel";
+		reg = <0x180000 0x800000>;
+	};
+	partition@8 {
+		label = "root";
+		reg = <0x980000 0x0>;
+	};
+};
-- 
2.1.4


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: dts: am335x-phycore-som: Move NAND partition table into board files
  2015-08-07  9:09 [PATCH] ARM: dts: am335x-phycore-som: Move NAND partition table into board files Matthias Klein
@ 2015-08-11 10:04 ` Teresa Remmet
  0 siblings, 0 replies; 2+ messages in thread
From: Teresa Remmet @ 2015-08-11 10:04 UTC (permalink / raw)
  To: Matthias Klein; +Cc: tony, linux-omap, linux-arm-kernel, linux-kernel, support

Hello Matthias,

Am Freitag, den 07.08.2015, 11:09 +0200 schrieb Matthias Klein:
> Partitions which are defined in the som file can not be deleted in the
> board file.
> 
> Signed-off-by: Matthias Klein <matthias.klein@optimeas.de>
> ---
>  arch/arm/boot/dts/am335x-phycore-som.dtsi | 37 -------------------------
>  arch/arm/boot/dts/am335x-wega.dtsi        | 45 +++++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+), 37 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
> index 4d28fc3..8f12bd54 100644
> --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
> +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
> @@ -189,43 +189,6 @@
>  
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> -
> -		partition@0 {
> -			label = "xload";
> -			reg = <0x0 0x20000>;
> -		};
> -		partition@1 {
> -			label = "xload_backup1";
> -			reg = <0x20000 0x20000>;
> -		};
> -		partition@2 {
> -			label = "xload_backup2";
> -			reg = <0x40000 0x20000>;
> -		};
> -		partition@3 {
> -			label = "xload_backup3";
> -			reg = <0x60000 0x20000>;
> -		};
> -		partition@4 {
> -			label = "barebox";
> -			reg = <0x80000 0x80000>;
> -		};
> -		partition@5 {
> -			label = "bareboxenv";
> -			reg = <0x100000 0x40000>;
> -		};
> -		partition@6 {
> -			label = "oftree";
> -			reg = <0x140000 0x40000>;
> -		};
> -		partition@7 {
> -			label = "kernel";
> -			reg = <0x180000 0x800000>;
> -		};
> -		partition@8 {
> -			label = "root";
> -			reg = <0x980000 0x0>;
> -		};
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
> index 5e541bd..945a41d 100644
> --- a/arch/arm/boot/dts/am335x-wega.dtsi
> +++ b/arch/arm/boot/dts/am335x-wega.dtsi
> @@ -149,3 +149,48 @@
>  &usb1_phy {
>  	status = "okay";
>  };

I don't think that moving the nand partition to the carrier board dtsi is correct.
The nand partition does not have anything to do with the carrier board in first place.
So they should rather be moved to the am335x-wega-rdk.dts which does describe the 
board in a whole. 
If you do this, you should remove the spi partitions from the SoM dtsi also.

And it is generally possible to delete nodes from a device tree with /delete-node/ &my_node; 
But I have actually not tested this when overwriting partitions. Neither know if this whould
be a sane solution.

Regards
Teresa

> +
> +&nandflash {
> +	partition@0 {
> +		label = "xload";
> +		reg = <0x0 0x20000>;
> +	};
> +
> +	partition@1 {
> +		label = "xload_backup1";
> +		reg = <0x20000 0x20000>;
> +	};
> +
> +	partition@2 {
> +		label = "xload_backup2";
> +		reg = <0x40000 0x20000>;
> +	};
> +
> +	partition@3 {
> +		label = "xload_backup3";
> +		reg = <0x60000 0x20000>;
> +	};
> +
> +	partition@4 {
> +		label = "barebox";
> +		reg = <0x80000 0x80000>;
> +	};
> +
> +	partition@5 {
> +		label = "bareboxenv";
> +		reg = <0x100000 0x40000>;
> +	};
> +
> +	partition@6 {
> +		label = "oftree";
> +		reg = <0x140000 0x40000>;
> +	};
> +	partition@7 {
> +		label = "kernel";
> +		reg = <0x180000 0x800000>;
> +	};
> +	partition@8 {
> +		label = "root";
> +		reg = <0x980000 0x0>;
> +	};
> +};



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2015-08-11 10:04 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-07  9:09 [PATCH] ARM: dts: am335x-phycore-som: Move NAND partition table into board files Matthias Klein
2015-08-11 10:04 ` Teresa Remmet

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).