linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ian Campbell <ian.campbell@citrix.com>
To: <linux-kernel@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	"Mark Rutland" <mark.rutland@arm.com>,
	Kumar Gala <galak@codeaurora.org>,
	"Liviu Dudau" <liviu.dudau@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	Russell King <linux@arm.linux.org.uk>,
	Catalin Marinas <catalin.marinas@arm.com>,
	"Will Deacon" <will.deacon@arm.com>,
	Kristina Martsenko <kristina.martsenko@arm.com>,
	Kevin Hilman <khilman@linaro.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kbuild@vger.kernel.org>
Subject: Re: [PATCH v5] dtb: Create a common home for cross-architecture dtsi files.
Date: Tue, 11 Aug 2015 11:07:26 +0100	[thread overview]
Message-ID: <1439287646.9747.212.camel@citrix.com> (raw)
In-Reply-To: <1438618000-1091-1-git-send-email-ian.campbell@citrix.com>

On Mon, 2015-08-03 at 17:06 +0100, Ian Campbell wrote:
> Commit 9ccd608070b6 ("arm64: dts: add device tree for ARM SMM-A53x2 on
> LogicTile Express 20MG") added a new dts file to arch/arm64 which
> included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a
> .dtsi supplied by arch/arm.
> 
> Unfortunately this causes some issues for the split device tree
> repository[0], since things get moved around there. In that context
> the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
> while the include is at src/arm/vexpress-v2m-rs1.dtsi.

Hi Grant,

Do you think there is any chance of getting this into 4.2-rc$NEXT or shall
we wait until 4.3? I'm assuming this should go via the DT tree, but maybe
it should go via an ARM tree?

Ian.

> 
> The sharing of the .dtsi is legitimate since the baseboard is the same
> for various vexpress systems whatever processor they use.
> 
> Rather than using ../../ tricks to pickup .dtsi files from another
> arch this patch creates a new directory kernel/dts as a home for such
> cross-arch .dtsi files and arranges for it to be in the include path
> for both dtc and cpp. The dtsi file itself is moved into a vendor
> subdir in this case "arm" (the vendor, not the ARCH=).
> 
> [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree
> -rebasing.git/
> 
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Kumar Gala <galak@codeaurora.org>
> Cc: Liviu Dudau <liviu.dudau@arm.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Kristina Martsenko <kristina.martsenko@arm.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kbuild@vger.kernel.org
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---
> v2: Move to include/dt-dtsi and introduce a per-vendor subdirectory.
> 
> v3: Move to kernel/dts.
>     Include new directory in DTC include path as well as cpp path, and
>     therefore switch back to /include/.
>     Update MAINTAINERS
> 
> v4: Change path in changelog too.
>     Add ()s to title of 9ccd608070b6.
> 
> v5: Remove stale reference to switching from /include/ to #include.
> ---
>  Documentation/devicetree/bindings/arm/vexpress.txt          | 2 +-
>  MAINTAINERS                                                 | 1 +
>  arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts                 | 2 +-
>  arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts                  | 2 +-
>  arch/arm/boot/dts/vexpress-v2p-ca5s.dts                     | 2 +-
>  arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts        | 2 +-
>  {arch/arm/boot/dts => kernel/dts/arm}/vexpress-v2m-rs1.dtsi | 0
>  scripts/Makefile.lib                                        | 3 ++-
>  8 files changed, 8 insertions(+), 6 deletions(-)
>  rename {arch/arm/boot/dts => kernel/dts/arm}/vexpress-v2m-rs1.dtsi 
> (100%)
> 
> diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt 
> b/Documentation/devicetree/bindings/arm/vexpress.txt
> index 39844cd..b6031d9 100644
> --- a/Documentation/devicetree/bindings/arm/vexpress.txt
> +++ b/Documentation/devicetree/bindings/arm/vexpress.txt
> @@ -223,7 +223,7 @@ Example of a VE tile description (simplified)
>  		/* Active high IRQ 0 is connected to GIC's SPI0 */
>  		interrupt-map = <0 0 0 &gic 0 0 4>;
>  
> -		/include/ "vexpress-v2m-rs1.dtsi"
> +		/include/ "arm/vexpress-v2m-rs1.dtsi"
>  	};
>  };
>  
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a226416..1941078 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7537,6 +7537,7 @@ S:	Maintained
>  F:	Documentation/devicetree/
>  F:	arch/*/boot/dts/
>  F:	include/dt-bindings/
> +F:	kernel/dts/
>  
>  OPEN FIRMWARE AND DEVICE TREE OVERLAYS
>  M:	Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts 
> b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> index 9420053..b144092 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
> @@ -278,6 +278,6 @@
>  				<0 0 41 &gic 0 41 4>,
>  				<0 0 42 &gic 0 42 4>;
>  
> -		/include/ "vexpress-v2m-rs1.dtsi"
> +		/include/ "arm/vexpress-v2m-rs1.dtsi"
>  	};
>  };
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts 
> b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> index 17f63f7..350f402 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
> @@ -636,6 +636,6 @@
>  				<0 0 41 &gic 0 41 4>,
>  				<0 0 42 &gic 0 42 4>;
>  
> -		/include/ "vexpress-v2m-rs1.dtsi"
> +		/include/ "arm/vexpress-v2m-rs1.dtsi"
>  	};
>  };
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts 
> b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> index d2709b7..585ced0 100644
> --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> @@ -248,6 +248,6 @@
>  				<0 0 41 &gic 0 41 4>,
>  				<0 0 42 &gic 0 42 4>;
>  
> -		/include/ "vexpress-v2m-rs1.dtsi"
> +		/include/ "arm/vexpress-v2m-rs1.dtsi"
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts 
> b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
> index 5b1d018..c044804 100644
> --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
> +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
> @@ -186,6 +186,6 @@
>  				<0 0 41 &gic GIC_SPI 41 
> IRQ_TYPE_LEVEL_HIGH>,
>  				<0 0 42 &gic GIC_SPI 42 
> IRQ_TYPE_LEVEL_HIGH>;
>  
> -		/include/ "../../../../arm/boot/dts/vexpress-v2m
> -rs1.dtsi"
> +		/include/ "arm/vexpress-v2m-rs1.dtsi"
>  	};
>  };
> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi 
> b/kernel/dts/arm/vexpress-v2m-rs1.dtsi
> similarity index 100%
> rename from arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> rename to kernel/dts/arm/vexpress-v2m-rs1.dtsi
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index 79e8661..b4d9fb6 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -163,6 +163,7 @@ dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc
>                     \
>  		 -I$(srctree)/arch/$(SRCARCH)/boot/dts                  
>  \
>  		 -I$(srctree)/arch/$(SRCARCH)/boot/dts/include          
>  \
>  		 -I$(srctree)/drivers/of/testcase-data                  
>  \
> +		 -I$(srctree)/kernel/dts                                
>  \
>  		 -undef -D__DTS__
>  
>  # Finds the multi-part object the current object will be linked into
> @@ -285,7 +286,7 @@ quiet_cmd_dtc = DTC     $@
>  cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
>  	$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; 
> \
>  	$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
> -		-i $(dir $<) $(DTC_FLAGS) \
> +		-i $(dir $<) -i $(srctree)/kernel/dts $(DTC_FLAGS) \
>  		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
>  	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
>  

  parent reply	other threads:[~2015-08-11 10:07 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-03 16:06 [PATCH v5] dtb: Create a common home for cross-architecture dtsi files Ian Campbell
2015-08-03 16:47 ` Frank Rowand
2015-08-11 10:07 ` Ian Campbell [this message]
2015-08-14 21:21   ` Rob Herring
2015-08-16  9:01     ` Ian Campbell
2015-08-23 23:13     ` Olof Johansson
2015-08-23 23:42       ` Rob Herring
2015-08-23 23:52         ` Olof Johansson
2015-08-24 20:58           ` Rob Herring
2015-08-24 22:22             ` Olof Johansson
2015-09-01  8:44               ` Ian Campbell
2015-09-17 11:07               ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439287646.9747.212.camel@citrix.com \
    --to=ian.campbell@citrix.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=khilman@linaro.org \
    --cc=kristina.martsenko@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kbuild@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=liviu.dudau@arm.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).