linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-rpi-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Stephen Warren <swarren@wwwdotorg.org>,
	Lee Jones <lee@kernel.org>,
	devicetree@vger.kernel.org,
	Derek Foreman <derekf@osg.samsung.com>,
	Eric Anholt <eric@anholt.net>
Subject: [PATCH v2 4/7] drm/vc4: Use the fbdev_cma helpers
Date: Tue, 18 Aug 2015 14:54:05 -0700	[thread overview]
Message-ID: <1439934848-7196-5-git-send-email-eric@anholt.net> (raw)
In-Reply-To: <1439934848-7196-1-git-send-email-eric@anholt.net>

From: Derek Foreman <derekf@osg.samsung.com>

Keep the fbdev_cma pointer around so we can use it on hotplog and close
to ensure the frame buffer console is in a useful state.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_drv.c | 14 ++++++++++++++
 drivers/gpu/drm/vc4/vc4_drv.h |  2 ++
 drivers/gpu/drm/vc4/vc4_kms.c | 18 +++++++++++++++---
 3 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index d30aefa..8ebd238 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include "drm_fb_cma_helper.h"
 
 #include "vc4_drv.h"
 #include "vc4_regs.h"
@@ -49,6 +50,14 @@ static void vc4_drm_preclose(struct drm_device *dev, struct drm_file *file)
 		vc4_cancel_page_flip(crtc, file);
 }
 
+static void vc4_lastclose(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	if (vc4->fbdev)
+		drm_fbdev_cma_restore_mode(vc4->fbdev);
+}
+
 static const struct file_operations vc4_drm_fops = {
 	.owner = THIS_MODULE,
 	.open = drm_open,
@@ -71,6 +80,7 @@ static struct drm_driver vc4_drm_driver = {
 			    DRIVER_ATOMIC |
 			    DRIVER_GEM |
 			    DRIVER_PRIME),
+	.lastclose = vc4_lastclose,
 	.preclose = vc4_drm_preclose,
 
 	.enable_vblank = vc4_enable_vblank,
@@ -161,6 +171,10 @@ static void vc4_drm_unbind(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm = platform_get_drvdata(pdev);
+	struct vc4_dev *vc4 = to_vc4_dev(drm);
+
+	if (vc4->fbdev)
+		drm_fbdev_cma_fini(vc4->fbdev);
 
 	drm_mode_config_cleanup(drm);
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 282ce0b..24a1cb5 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -15,6 +15,8 @@ struct vc4_dev {
 	struct vc4_hdmi *hdmi;
 	struct vc4_hvs *hvs;
 	struct vc4_crtc *crtc[3];
+
+	struct drm_fbdev_cma *fbdev;
 };
 
 static inline struct vc4_dev *
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index e5e96bc..a34439f 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -21,7 +21,16 @@
 #include "drm_fb_cma_helper.h"
 #include "vc4_drv.h"
 
+static void vc4_output_poll_changed(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	if (vc4->fbdev)
+		drm_fbdev_cma_hotplug_event(vc4->fbdev);
+}
+
 static const struct drm_mode_config_funcs vc4_mode_funcs = {
+	.output_poll_changed = vc4_output_poll_changed,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,
 	.fb_create = drm_fb_cma_create,
@@ -54,6 +63,7 @@ fail:
 
 int vc4_kms_load(struct drm_device *dev)
 {
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	int ret;
 
 	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
@@ -73,9 +83,11 @@ int vc4_kms_load(struct drm_device *dev)
 
 	drm_mode_config_reset(dev);
 
-	drm_fbdev_cma_init(dev, 32,
-			   dev->mode_config.num_crtc,
-			   dev->mode_config.num_connector);
+	vc4->fbdev = drm_fbdev_cma_init(dev, 32,
+					dev->mode_config.num_crtc,
+					dev->mode_config.num_connector);
+	if (IS_ERR(vc4->fbdev))
+		vc4->fbdev = NULL;
 
 	drm_kms_helper_poll_init(dev);
 
-- 
2.1.4


  parent reply	other threads:[~2015-08-18 21:54 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-18 21:54 Raspberry Pi KMS-only driver V2 Eric Anholt
2015-08-18 21:54 ` [PATCH v2 1/7] drm/vc4: Add devicetree bindings for VC4 Eric Anholt
2015-08-19 20:38   ` Stefan Wahren
2015-08-26  9:44   ` Luc Verhaegen
2015-08-18 21:54 ` [PATCH v2 2/7] MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver Eric Anholt
2015-08-18 21:54 ` [PATCH v2 3/7] drm/vc4: Add KMS support for Raspberry Pi Eric Anholt
2015-08-19 21:37   ` Stefan Wahren
2015-08-25  8:44   ` Daniel Vetter
2015-08-18 21:54 ` Eric Anholt [this message]
2015-08-18 21:54 ` [PATCH v2 5/7] drm/vc4: Allow vblank to be disabled Eric Anholt
2015-08-18 21:54 ` [PATCH v2 6/7] ARM: bcm2835: Add the DDC I2C controller to the device tree Eric Anholt
2015-08-26  2:02   ` Stephen Warren
2015-08-18 21:54 ` [PATCH v2 7/7] ARM: bcm2835: Add VC4 " Eric Anholt
2015-08-26  2:04   ` Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439934848-7196-5-git-send-email-eric@anholt.net \
    --to=eric@anholt.net \
    --cc=derekf@osg.samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).