From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Stephen Warren <swarren@wwwdotorg.org>,
Lee Jones <lee@kernel.org>,
devicetree@vger.kernel.org, Eric Anholt <eric@anholt.net>
Subject: [PATCH v2 7/7] ARM: bcm2835: Add VC4 to the device tree.
Date: Tue, 18 Aug 2015 14:54:08 -0700 [thread overview]
Message-ID: <1439934848-7196-8-git-send-email-eric@anholt.net> (raw)
In-Reply-To: <1439934848-7196-1-git-send-email-eric@anholt.net>
VC4 is the GPU (display and 3D) present on the 2835.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
v2: Sort by register address, mark HDMI as disabled by default in the
SoC file and enable it from -rpi.
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++
arch/arm/boot/dts/bcm2835.dtsi | 44 ++++++++++++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 29cc7ba..f7217906 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -49,6 +49,10 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
&sdhci {
status = "okay";
bus-width = <4>;
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 20574cc..e625a21 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,4 +1,5 @@
#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
@@ -131,6 +132,18 @@
status = "disabled";
};
+ pv0: brcm,vc4-pixelvalve@7e206000 {
+ compatible = "brcm,vc4-pixelvalve";
+ reg = <0x7e206000 0x100>;
+ interrupts = <2 13>; /* pwa2 */
+ };
+
+ pv1: brcm,vc4-pixelvalve@7e207000 {
+ compatible = "brcm,vc4-pixelvalve";
+ reg = <0x7e207000 0x100>;
+ interrupts = <2 14>; /* pwa1 */
+ };
+
sdhci: sdhci@7e300000 {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
@@ -139,6 +152,12 @@
status = "disabled";
};
+ hvs: brcm,hvs@7e400000 {
+ compatible = "brcm,vc4-hvs";
+ reg = <0x7e400000 0x6000>;
+ interrupts = <2 1>;
+ };
+
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
@@ -159,6 +178,23 @@
status = "disabled";
};
+ pv2: brcm,vc4-pixelvalve@7e807000 {
+ compatible = "brcm,vc4-pixelvalve";
+ reg = <0x7e807000 0x100>;
+ interrupts = <2 10>; /* pixelvalve */
+ };
+
+ hdmi: brcm,vc4-hdmi@7e902000 {
+ compatible = "brcm,vc4-hdmi";
+ reg = <0x7e902000 0x600>,
+ <0x7e808000 0x100>;
+ interrupts = <2 8>, <2 9>;
+ ddc = <&i2c2>;
+ hpd-gpio = <&gpio 46 GPIO_ACTIVE_HIGH>;
+ crtc = <&pv2>;
+ status = "disabled";
+ };
+
usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
@@ -168,6 +204,14 @@
arm-pmu {
compatible = "arm,arm1176-pmu";
};
+
+ vc4: vc4@0x7e4c0000 {
+ compatible = "brcm,vc4";
+
+ crtcs = <&pv0>, <&pv1>, <&pv2>;
+ encoders = <&hdmi>;
+ hvss = <&hvs>;
+ };
};
clocks {
--
2.1.4
next prev parent reply other threads:[~2015-08-18 21:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-18 21:54 Raspberry Pi KMS-only driver V2 Eric Anholt
2015-08-18 21:54 ` [PATCH v2 1/7] drm/vc4: Add devicetree bindings for VC4 Eric Anholt
2015-08-19 20:38 ` Stefan Wahren
2015-08-26 9:44 ` Luc Verhaegen
2015-08-18 21:54 ` [PATCH v2 2/7] MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver Eric Anholt
2015-08-18 21:54 ` [PATCH v2 3/7] drm/vc4: Add KMS support for Raspberry Pi Eric Anholt
2015-08-19 21:37 ` Stefan Wahren
2015-08-25 8:44 ` Daniel Vetter
2015-08-18 21:54 ` [PATCH v2 4/7] drm/vc4: Use the fbdev_cma helpers Eric Anholt
2015-08-18 21:54 ` [PATCH v2 5/7] drm/vc4: Allow vblank to be disabled Eric Anholt
2015-08-18 21:54 ` [PATCH v2 6/7] ARM: bcm2835: Add the DDC I2C controller to the device tree Eric Anholt
2015-08-26 2:02 ` Stephen Warren
2015-08-18 21:54 ` Eric Anholt [this message]
2015-08-26 2:04 ` [PATCH v2 7/7] ARM: bcm2835: Add VC4 " Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439934848-7196-8-git-send-email-eric@anholt.net \
--to=eric@anholt.net \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).