linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jens Kuske <jenskuske@gmail.com>
To: "Maxime Ripard" <maxime.ripard@free-electrons.com>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Emilio López" <emilio@elopez.com.ar>
Cc: Vishnu Patekar <vishnupatekar0510@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Jens Kuske <jenskuske@gmail.com>
Subject: [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support
Date: Wed, 21 Oct 2015 18:20:28 +0200	[thread overview]
Message-ID: <1445444428-4652-3-git-send-email-jenskuske@gmail.com> (raw)
In-Reply-To: <1445444428-4652-1-git-send-email-jenskuske@gmail.com>

The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
and a 40-pin GPIO header.

Signed-off-by: Jens Kuske <jenskuske@gmail.com>
---
 arch/arm/boot/dts/Makefile                   |  3 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35a3cf4..bedf51b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -643,7 +643,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-h3-orangepi-plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 0000000..e67df59
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Plus";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
-- 
2.6.1


  parent reply	other threads:[~2015-10-21 16:20 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-21 16:20 [PATCH 4/6] reset: sunxi: Add compatible for Allwinner H3 bus resets Jens Kuske
2015-10-21 16:20 ` [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI Jens Kuske
2015-10-22  8:05   ` Maxime Ripard
2015-10-22  8:29     ` Jean-Francois Moine
2015-10-22  8:47       ` Maxime Ripard
2015-10-22  8:57         ` Jean-Francois Moine
2015-10-22  9:14           ` Maxime Ripard
2015-10-22 11:30             ` Jens Kuske
2015-10-23 18:09               ` Maxime Ripard
2015-10-22 17:30   ` Jean-Francois Moine
2015-10-23 18:14   ` Maxime Ripard
2015-10-23 19:20     ` Jean-Francois Moine
2015-10-24  7:13       ` Maxime Ripard
2015-10-24  8:47         ` Jean-Francois Moine
2015-10-26 21:06           ` Maxime Ripard
2015-10-27  8:12             ` [linux-sunxi] " Hans de Goede
2015-10-24  8:39     ` Hans de Goede
2015-10-26 21:00       ` Maxime Ripard
2015-10-21 16:20 ` Jens Kuske [this message]
2015-10-22  7:58 ` [PATCH 4/6] reset: sunxi: Add compatible for Allwinner H3 bus resets Maxime Ripard
2015-10-27 16:54   ` Jens Kuske
  -- strict thread matches above, loose matches on Subject: below --
2015-05-06  9:31 [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support Jens Kuske
2015-05-06  9:31 ` [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support Jens Kuske

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445444428-4652-3-git-send-email-jenskuske@gmail.com \
    --to=jenskuske@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=hdegoede@redhat.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=vishnupatekar0510@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).