From: Marc Titinger <mtitinger@baylibre.com>
To: linux@roeck-us.net, jdelvare@suse.com
Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
Marc Titinger <mtitinger@baylibre.com>
Subject: [PATCH 2/2] hwmon: ina2xx: give precedence to DT over checking for platform data.
Date: Mon, 26 Oct 2015 17:24:33 +0100 [thread overview]
Message-ID: <1445876673-32180-3-git-send-email-mtitinger@baylibre.com> (raw)
In-Reply-To: <1445876673-32180-1-git-send-email-mtitinger@baylibre.com>
In-Reply-To: <562B7D56.3010700@roeck-us.net>
when checking for the value of the shunt resistor.
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
---
drivers/hwmon/ina2xx.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 3edd163..1946433 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -414,7 +414,6 @@ static const struct attribute_group ina226_group = {
static int ina2xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct ina2xx_platform_data *pdata;
struct device *dev = &client->dev;
struct ina2xx_data *data;
struct device *hwmon_dev;
@@ -425,14 +424,13 @@ static int ina2xx_probe(struct i2c_client *client,
if (!data)
return -ENOMEM;
- if (dev_get_platdata(dev)) {
- pdata = dev_get_platdata(dev);
- data->rshunt = pdata->shunt_uohms;
- } else if (!of_property_read_u32(dev->of_node,
- "shunt-resistor", &val)) {
- data->rshunt = val;
- } else {
- data->rshunt = INA2XX_RSHUNT_DEFAULT;
+ if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
+ struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata)
+ val = pdata->shunt_uohms;
+ else
+ val = INA2XX_RSHUNT_DEFAULT;
}
/* set the device type */
@@ -440,10 +438,11 @@ static int ina2xx_probe(struct i2c_client *client,
data->config = &ina2xx_config[data->kind];
data->client = client;
- if (data->rshunt <= 0 ||
- data->rshunt > data->config->calibration_factor)
+ if (val <= 0 || val > data->config->calibration_factor)
return -ENODEV;
+ data->rshunt = val;
+
ina2xx_regmap_config.max_register = data->config->registers;
data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
--
1.9.1
next prev parent reply other threads:[~2015-10-26 16:25 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-19 16:21 [RFC] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz Marc Titinger
2015-10-20 1:32 ` Guenter Roeck
2015-10-20 7:58 ` Marc Titinger
2015-10-20 8:20 ` [PATCH v2] " Marc Titinger
2015-10-20 12:54 ` Guenter Roeck
2015-10-20 13:17 ` Marc Titinger
2015-10-20 13:30 ` Guenter Roeck
2015-10-20 13:46 ` Marc Titinger
2015-10-20 17:00 ` Guenter Roeck
2015-10-21 7:46 ` Marc Titinger
2015-10-20 13:52 ` Michael Turquette
2015-10-23 16:13 ` [RFC] hwmon: ina2xx: port to using remap, improve bandwidth Marc Titinger
2015-10-23 16:49 ` kbuild test robot
2015-10-23 16:52 ` Guenter Roeck
2015-10-23 20:35 ` Marc Titinger
2015-10-24 2:21 ` Guenter Roeck
2015-10-24 12:45 ` Guenter Roeck
2015-10-26 16:24 ` [PATCH 0/2] hwmon: ina2xx: convert driver to using regmap Marc Titinger
2015-10-26 16:24 ` [PATCH 1/2] " Marc Titinger
2015-10-27 1:02 ` Guenter Roeck
2015-10-27 1:12 ` Guenter Roeck
2015-10-27 9:51 ` [PATCH v2 " Marc Titinger
2015-10-28 2:47 ` Guenter Roeck
2015-10-28 9:23 ` Marc Titinger
2015-10-26 16:24 ` Marc Titinger [this message]
2015-10-27 1:10 ` [PATCH 2/2] hwmon: ina2xx: give precedence to DT over checking for platform data Guenter Roeck
2015-10-27 9:51 ` [PATCH v2 " Marc Titinger
2015-10-23 16:55 ` [RFC] hwmon: ina2xx: port to using remap, improve bandwidth kbuild test robot
2015-10-23 20:10 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445876673-32180-3-git-send-email-mtitinger@baylibre.com \
--to=mtitinger@baylibre.com \
--cc=jdelvare@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).