From: Damien Riegel <damien.riegel@savoirfairelinux.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-watchdog@vger.kernel.org
Cc: shawnguo@kernel.org, kernel@pengutronix.de, wim@iguana.be,
robh+dt@kernel.org, sameo@linux.intel.com, lee.jones@linaro.org,
dinh.linux@gmail.com, linux@roeck-us.net,
kernel@savoirfairelinux.com,
Damien Riegel <damien.riegel@savoirfairelinux.com>
Subject: [PATCH v2 2/5] mfd: ts4800-syscon: add driver for TS-4800 syscon
Date: Thu, 29 Oct 2015 16:27:27 -0400 [thread overview]
Message-ID: <1446150450-22093-3-git-send-email-damien.riegel@savoirfairelinux.com> (raw)
In-Reply-To: <1446150450-22093-1-git-send-email-damien.riegel@savoirfairelinux.com>
Driver for TS-4800 syscon. These registers belong to a FPGA that is
memory mapped and are used for counters, enable various IPs in the FPGA,
control LEDs, control IOs, etc.
Currently, only the watchdog is handled.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
---
.../devicetree/bindings/mfd/ts4800-syscon.txt | 12 ++++
drivers/mfd/Kconfig | 7 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/ts4800-syscon.c | 84 ++++++++++++++++++++++
include/linux/mfd/ts4800-syscon.h | 24 +++++++
5 files changed, 128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/ts4800-syscon.txt
create mode 100644 drivers/mfd/ts4800-syscon.c
create mode 100644 include/linux/mfd/ts4800-syscon.h
diff --git a/Documentation/devicetree/bindings/mfd/ts4800-syscon.txt b/Documentation/devicetree/bindings/mfd/ts4800-syscon.txt
new file mode 100644
index 0000000..8dbc12c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ts4800-syscon.txt
@@ -0,0 +1,12 @@
+Technologic Systems Syscon
+
+Required properties:
+- compatible : must be "ts,ts4800-syscon"
+- reg : physical base address and length of memory mapped region
+
+Example:
+
+syscon@b0010000 {
+ compatible = "ts,ts4800-syscon";
+ reg = <0xb0010000 0x3d>;
+};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3f68dd2..8f03dce 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1302,6 +1302,13 @@ config MFD_TC6393XB
help
Support for Toshiba Mobile IO Controller TC6393XB
+config MFD_TS4800_SYSCON
+ tristate "TS-4800 Syscon Support"
+ select REGMAP
+ select REGMAP_MMIO
+ help
+ Support for TS-4800's FPGA Syscon registers
+
config MFD_VX855
tristate "VIA VX855/VX875 integrated south bridge"
depends on PCI
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ea40e07..e2c0f1b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -181,6 +181,7 @@ obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
+obj-$(CONFIG_MFD_TS4800_SYSCON) += ts4800-syscon.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/ts4800-syscon.c b/drivers/mfd/ts4800-syscon.c
new file mode 100644
index 0000000..1e42e96
--- /dev/null
+++ b/drivers/mfd/ts4800-syscon.c
@@ -0,0 +1,84 @@
+/*
+ * Device driver for TS-4800 FPGA's syscon
+ *
+ * Copyright (c) 2015 - Savoir-faire Linux
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/ts4800-syscon.h>
+
+
+static const struct regmap_config ts4800_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 2,
+ .val_bits = 16,
+};
+
+static int ts4800_syscon_probe(struct platform_device *pdev)
+{
+ struct ts4800_syscon *syscon;
+ struct resource *res;
+ void __iomem *base;
+
+ syscon = devm_kzalloc(&pdev->dev, sizeof(*syscon), GFP_KERNEL);
+ if (!syscon)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ syscon->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+ &ts4800_regmap_config);
+ if (IS_ERR(syscon->regmap)) {
+ dev_err(&pdev->dev,
+ "regmap init failed: %ld\n",
+ PTR_ERR(syscon->regmap));
+ return PTR_ERR(syscon->regmap);
+ }
+
+ platform_set_drvdata(pdev, syscon);
+
+ return 0;
+}
+
+static int ts4800_syscon_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id ts4800_syscon_of_match[] = {
+ { .compatible = "ts,ts4800-syscon", },
+ { },
+};
+
+static struct platform_driver ts4800_syscon_driver = {
+ .driver = {
+ .name = "ts4800_syscon",
+ .of_match_table = ts4800_syscon_of_match,
+ },
+ .probe = ts4800_syscon_probe,
+ .remove = ts4800_syscon_remove,
+};
+module_platform_driver(ts4800_syscon_driver);
+
+MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("TS-4800 Syscon driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/ts4800-syscon.h b/include/linux/mfd/ts4800-syscon.h
new file mode 100644
index 0000000..3d29184
--- /dev/null
+++ b/include/linux/mfd/ts4800-syscon.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2015 - Savoir-faire Linux
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __LINUX_MFD_TS4800_SYSCON_H
+#define __LINUX_MFD_TS4800_SYSCON_H
+
+#include <linux/regmap.h>
+
+struct ts4800_syscon {
+ struct regmap *regmap;
+};
+
+#endif /* __LINUX_MFD_TS4800_SYSCON_H */
--
2.5.0
next prev parent reply other threads:[~2015-10-29 20:52 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-29 20:27 [PATCH v2 0/5] Add board support for TS-4800 Damien Riegel
2015-10-29 20:27 ` [PATCH v2 1/5] of: add vendor prefix for Technologic Systems Damien Riegel
2015-10-30 18:04 ` Lee Jones
2015-10-30 19:58 ` Damien Riegel
2015-11-02 9:13 ` Lee Jones
2015-10-29 20:27 ` Damien Riegel [this message]
2015-10-30 17:56 ` [PATCH v2 2/5] mfd: ts4800-syscon: add driver for TS-4800 syscon Lee Jones
2015-10-30 20:08 ` Damien Riegel
2015-11-02 9:12 ` Lee Jones
2015-11-02 18:13 ` Damien Riegel
2015-11-03 8:38 ` Lee Jones
2015-11-03 8:39 ` Lee Jones
2015-11-03 8:40 ` Arnd Bergmann
2015-11-03 10:12 ` Lee Jones
2015-11-03 10:48 ` Arnd Bergmann
2015-11-03 14:36 ` Damien Riegel
2015-10-29 20:27 ` [PATCH v2 3/5] watchdog: ts4800: add driver for TS-4800 watchdog Damien Riegel
2015-10-30 17:28 ` Lee Jones
2015-10-30 17:52 ` Lee Jones
2015-10-29 20:27 ` [PATCH v2 4/5] ARM: imx_v6_v7_defconfig: add TS-4800 watchdog and syscon Damien Riegel
2015-10-29 20:27 ` [PATCH v2 5/5] ARM: dts: TS-4800: add basic device tree Damien Riegel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446150450-22093-3-git-send-email-damien.riegel@savoirfairelinux.com \
--to=damien.riegel@savoirfairelinux.com \
--cc=dinh.linux@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kernel@savoirfairelinux.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
--cc=shawnguo@kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).