From: Damien Riegel <damien.riegel@savoirfairelinux.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-watchdog@vger.kernel.org, shawnguo@kernel.org,
kernel@pengutronix.de, wim@iguana.be, robh+dt@kernel.org,
sameo@linux.intel.com, dinh.linux@gmail.com, linux@roeck-us.net,
kernel@savoirfairelinux.com
Subject: Re: [PATCH v2 2/5] mfd: ts4800-syscon: add driver for TS-4800 syscon
Date: Fri, 30 Oct 2015 16:08:13 -0400 [thread overview]
Message-ID: <20151030200812.GB8666@localhost> (raw)
In-Reply-To: <20151030175656.GF4058@x1>
On Fri, Oct 30, 2015 at 05:56:56PM +0000, Lee Jones wrote:
> On Thu, 29 Oct 2015, Damien Riegel wrote:
>
> > Driver for TS-4800 syscon. These registers belong to a FPGA that is
> > memory mapped and are used for counters, enable various IPs in the FPGA,
> > control LEDs, control IOs, etc.
> >
> > Currently, only the watchdog is handled.
>
> Why do you require your own syscon driver?
>
> What's wrong with the generic one?
>
The generic one uses a regmap_config with reg_stride set to 4 and val_bits
to 32.
TS-4800 syscon registers are 16-bit wide and must be accessed with 16
bit read and writes:
http://wiki.embeddedarm.com/wiki/TS-4800#Syscon
I will address the other issues in the next version (split commit,
license issue, style, and superfluous remove).
> > Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
> > ---
> > .../devicetree/bindings/mfd/ts4800-syscon.txt | 12 ++++
>
> Separate patch please.
>
> > drivers/mfd/Kconfig | 7 ++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/ts4800-syscon.c | 84 ++++++++++++++++++++++
> > include/linux/mfd/ts4800-syscon.h | 24 +++++++
> > 5 files changed, 128 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/ts4800-syscon.txt
> > create mode 100644 drivers/mfd/ts4800-syscon.c
> > create mode 100644 include/linux/mfd/ts4800-syscon.h
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/ts4800-syscon.txt b/Documentation/devicetree/bindings/mfd/ts4800-syscon.txt
> > new file mode 100644
> > index 0000000..8dbc12c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/ts4800-syscon.txt
> > @@ -0,0 +1,12 @@
> > +Technologic Systems Syscon
> > +
> > +Required properties:
> > +- compatible : must be "ts,ts4800-syscon"
> > +- reg : physical base address and length of memory mapped region
> > +
> > +Example:
> > +
> > +syscon@b0010000 {
> > + compatible = "ts,ts4800-syscon";
> > + reg = <0xb0010000 0x3d>;
> > +};
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 3f68dd2..8f03dce 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1302,6 +1302,13 @@ config MFD_TC6393XB
> > help
> > Support for Toshiba Mobile IO Controller TC6393XB
> >
> > +config MFD_TS4800_SYSCON
> > + tristate "TS-4800 Syscon Support"
> > + select REGMAP
> > + select REGMAP_MMIO
> > + help
> > + Support for TS-4800's FPGA Syscon registers
> > +
> > config MFD_VX855
> > tristate "VIA VX855/VX875 integrated south bridge"
> > depends on PCI
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index ea40e07..e2c0f1b 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -181,6 +181,7 @@ obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
> > obj-$(CONFIG_MFD_DLN2) += dln2.o
> > obj-$(CONFIG_MFD_RT5033) += rt5033.o
> > obj-$(CONFIG_MFD_SKY81452) += sky81452.o
> > +obj-$(CONFIG_MFD_TS4800_SYSCON) += ts4800-syscon.o
> >
> > intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> > diff --git a/drivers/mfd/ts4800-syscon.c b/drivers/mfd/ts4800-syscon.c
> > new file mode 100644
> > index 0000000..1e42e96
> > --- /dev/null
> > +++ b/drivers/mfd/ts4800-syscon.c
> > @@ -0,0 +1,84 @@
> > +/*
> > + * Device driver for TS-4800 FPGA's syscon
> > + *
> > + * Copyright (c) 2015 - Savoir-faire Linux
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
>
> Why is the MFD v2+ and the Watchdog driver only v2?
>
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> > + * more details.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/mfd/ts4800-syscon.h>
>
> Alphabetical.
>
> > +
> > +
>
> Superfluous '\n'.
>
> > +static const struct regmap_config ts4800_regmap_config = {
> > + .reg_bits = 32,
> > + .reg_stride = 2,
> > + .val_bits = 16,
> > +};
> > +
> > +static int ts4800_syscon_probe(struct platform_device *pdev)
> > +{
> > + struct ts4800_syscon *syscon;
> > + struct resource *res;
> > + void __iomem *base;
> > +
> > + syscon = devm_kzalloc(&pdev->dev, sizeof(*syscon), GFP_KERNEL);
> > + if (!syscon)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(base))
> > + return PTR_ERR(base);
> > +
> > + syscon->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
> > + &ts4800_regmap_config);
> > + if (IS_ERR(syscon->regmap)) {
> > + dev_err(&pdev->dev,
> > + "regmap init failed: %ld\n",
> > + PTR_ERR(syscon->regmap));
> > + return PTR_ERR(syscon->regmap);
> > + }
> > +
> > + platform_set_drvdata(pdev, syscon);
> > +
> > + return 0;
> > +}
> > +
> > +static int ts4800_syscon_remove(struct platform_device *pdev)
> > +{
> > + return 0;
> > +}
>
> If it doesn't do anything, don't provide it.
>
> > +static const struct of_device_id ts4800_syscon_of_match[] = {
> > + { .compatible = "ts,ts4800-syscon", },
> > + { },
> > +};
> > +
> > +static struct platform_driver ts4800_syscon_driver = {
> > + .driver = {
> > + .name = "ts4800_syscon",
> > + .of_match_table = ts4800_syscon_of_match,
> > + },
> > + .probe = ts4800_syscon_probe,
> > + .remove = ts4800_syscon_remove,
> > +};
> > +module_platform_driver(ts4800_syscon_driver);
> > +
> > +MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>");
> > +MODULE_DESCRIPTION("TS-4800 Syscon driver");
> > +MODULE_LICENSE("GPL v2");
>
> This does not match the header.
>
> > diff --git a/include/linux/mfd/ts4800-syscon.h b/include/linux/mfd/ts4800-syscon.h
> > new file mode 100644
> > index 0000000..3d29184
> > --- /dev/null
> > +++ b/include/linux/mfd/ts4800-syscon.h
> > @@ -0,0 +1,24 @@
> > +/*
> > + * Copyright (c) 2015 - Savoir-faire Linux
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> > + * more details.
> > + */
> > +
> > +#ifndef __LINUX_MFD_TS4800_SYSCON_H
> > +#define __LINUX_MFD_TS4800_SYSCON_H
> > +
> > +#include <linux/regmap.h>
> > +
> > +struct ts4800_syscon {
> > + struct regmap *regmap;
> > +};
> > +
> > +#endif /* __LINUX_MFD_TS4800_SYSCON_H */
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-10-30 20:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-29 20:27 [PATCH v2 0/5] Add board support for TS-4800 Damien Riegel
2015-10-29 20:27 ` [PATCH v2 1/5] of: add vendor prefix for Technologic Systems Damien Riegel
2015-10-30 18:04 ` Lee Jones
2015-10-30 19:58 ` Damien Riegel
2015-11-02 9:13 ` Lee Jones
2015-10-29 20:27 ` [PATCH v2 2/5] mfd: ts4800-syscon: add driver for TS-4800 syscon Damien Riegel
2015-10-30 17:56 ` Lee Jones
2015-10-30 20:08 ` Damien Riegel [this message]
2015-11-02 9:12 ` Lee Jones
2015-11-02 18:13 ` Damien Riegel
2015-11-03 8:38 ` Lee Jones
2015-11-03 8:39 ` Lee Jones
2015-11-03 8:40 ` Arnd Bergmann
2015-11-03 10:12 ` Lee Jones
2015-11-03 10:48 ` Arnd Bergmann
2015-11-03 14:36 ` Damien Riegel
2015-10-29 20:27 ` [PATCH v2 3/5] watchdog: ts4800: add driver for TS-4800 watchdog Damien Riegel
2015-10-30 17:28 ` Lee Jones
2015-10-30 17:52 ` Lee Jones
2015-10-29 20:27 ` [PATCH v2 4/5] ARM: imx_v6_v7_defconfig: add TS-4800 watchdog and syscon Damien Riegel
2015-10-29 20:27 ` [PATCH v2 5/5] ARM: dts: TS-4800: add basic device tree Damien Riegel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151030200812.GB8666@localhost \
--to=damien.riegel@savoirfairelinux.com \
--cc=dinh.linux@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kernel@savoirfairelinux.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
--cc=shawnguo@kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).