linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alim Akhtar <alim.akhtar@samsung.com>
To: lee.jones@linaro.org, broonie@kernel.org
Cc: k.kozlowski@samsung.com, linux-samsung-soc@vger.kernel.org,
	rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
	Thomas Abraham <thomas.ab@samsung.com>
Subject: [PATCH v5 2/4] mfd: sec: Add support for S2MPS15 PMIC
Date: Fri, 30 Oct 2015 11:55:32 +0530	[thread overview]
Message-ID: <1446186334-16510-3-git-send-email-alim.akhtar@samsung.com> (raw)
In-Reply-To: <1446186334-16510-1-git-send-email-alim.akhtar@samsung.com>

From: Thomas Abraham <thomas.ab@samsung.com>

Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outputs and battery charger. This patch adds initial support for
LDO and buck regulators of S2MPS15 device.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
[Alim: Added s2mps15_devs like rtc and clk and related changes]
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/sec-core.c              |   31 +++++++
 drivers/mfd/sec-irq.c               |    8 ++
 include/linux/mfd/samsung/core.h    |    1 +
 include/linux/mfd/samsung/s2mps15.h |  158 +++++++++++++++++++++++++++++++++++
 4 files changed, 198 insertions(+)
 create mode 100644 include/linux/mfd/samsung/s2mps15.h

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 2626fc0b5b8c..fbb8a5715597 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -29,6 +29,7 @@
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
@@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
 	}
 };
 
+static const struct mfd_cell s2mps15_devs[] = {
+	{
+		.name = "s2mps15-regulator",
+	}, {
+		.name = "s2mps15-rtc",
+	}, {
+		.name = "s2mps13-clk",
+		.of_compatible = "samsung,s2mps13-clk",
+	},
+};
+
 static const struct mfd_cell s2mpa01_devs[] = {
 	{
 		.name = "s2mpa01-pmic",
@@ -125,6 +137,9 @@ static const struct of_device_id sec_dt_match[] = {
 		.compatible = "samsung,s2mps14-pmic",
 		.data = (void *)S2MPS14X,
 	}, {
+		.compatible = "samsung,s2mps15-pmic",
+		.data = (void *)S2MPS15X,
+	}, {
 		.compatible = "samsung,s2mpa01-pmic",
 		.data = (void *)S2MPA01,
 	}, {
@@ -226,6 +241,15 @@ static const struct regmap_config s2mps14_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mps15_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS15_REG_LDODSCH4,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s2mpu02_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -387,6 +411,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	case S2MPS14X:
 		regmap = &s2mps14_regmap_config;
 		break;
+	case S2MPS15X:
+		regmap = &s2mps15_regmap_config;
+		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
 		break;
@@ -445,6 +472,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		sec_devs = s2mps14_devs;
 		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
 		break;
+	case S2MPS15X:
+		sec_devs = s2mps15_devs;
+		num_sec_devs = ARRAY_SIZE(s2mps15_devs);
+		break;
 	case S2MPU02:
 		sec_devs = s2mpu02_devs;
 		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 806fa8dbb22d..d77de431cc50 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
 	S2MPS1X_IRQ_CHIP_COMMON_DATA,
 };
 
+static const struct regmap_irq_chip s2mps15_irq_chip = {
+	.name = "s2mps15",
+	S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
 static const struct regmap_irq_chip s2mpu02_irq_chip = {
 	.name = "s2mpu02",
 	.irqs = s2mpu02_irqs,
@@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	case S2MPS14X:
 		sec_irq_chip = &s2mps14_irq_chip;
 		break;
+	case S2MPS15X:
+		sec_irq_chip = &s2mps15_irq_chip;
+		break;
 	case S2MPU02:
 		sec_irq_chip = &s2mpu02_irq_chip;
 		break;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index a06098639399..6bc4bcd488ac 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -44,6 +44,7 @@ enum sec_device_type {
 	S2MPS11X,
 	S2MPS13X,
 	S2MPS14X,
+	S2MPS15X,
 	S2MPU02,
 };
 
diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h
new file mode 100644
index 000000000000..36d35287c3c0
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps15.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_S2MPS15_H
+#define __LINUX_MFD_S2MPS15_H
+
+/* S2MPS15 registers */
+enum s2mps15_reg {
+	S2MPS15_REG_ID,
+	S2MPS15_REG_INT1,
+	S2MPS15_REG_INT2,
+	S2MPS15_REG_INT3,
+	S2MPS15_REG_INT1M,
+	S2MPS15_REG_INT2M,
+	S2MPS15_REG_INT3M,
+	S2MPS15_REG_ST1,
+	S2MPS15_REG_ST2,
+	S2MPS15_REG_PWRONSRC,
+	S2MPS15_REG_OFFSRC,
+	S2MPS15_REG_BU_CHG,
+	S2MPS15_REG_RTC_BUF,
+	S2MPS15_REG_CTRL1,
+	S2MPS15_REG_CTRL2,
+	S2MPS15_REG_RSVD1,
+	S2MPS15_REG_RSVD2,
+	S2MPS15_REG_RSVD3,
+	S2MPS15_REG_RSVD4,
+	S2MPS15_REG_RSVD5,
+	S2MPS15_REG_RSVD6,
+	S2MPS15_REG_CTRL3,
+	S2MPS15_REG_RSVD7,
+	S2MPS15_REG_RSVD8,
+	S2MPS15_REG_RSVD9,
+	S2MPS15_REG_B1CTRL1,
+	S2MPS15_REG_B1CTRL2,
+	S2MPS15_REG_B2CTRL1,
+	S2MPS15_REG_B2CTRL2,
+	S2MPS15_REG_B3CTRL1,
+	S2MPS15_REG_B3CTRL2,
+	S2MPS15_REG_B4CTRL1,
+	S2MPS15_REG_B4CTRL2,
+	S2MPS15_REG_B5CTRL1,
+	S2MPS15_REG_B5CTRL2,
+	S2MPS15_REG_B6CTRL1,
+	S2MPS15_REG_B6CTRL2,
+	S2MPS15_REG_B7CTRL1,
+	S2MPS15_REG_B7CTRL2,
+	S2MPS15_REG_B8CTRL1,
+	S2MPS15_REG_B8CTRL2,
+	S2MPS15_REG_B9CTRL1,
+	S2MPS15_REG_B9CTRL2,
+	S2MPS15_REG_B10CTRL1,
+	S2MPS15_REG_B10CTRL2,
+	S2MPS15_REG_BBCTRL1,
+	S2MPS15_REG_BBCTRL2,
+	S2MPS15_REG_BRAMP,
+	S2MPS15_REG_LDODVS1,
+	S2MPS15_REG_LDODVS2,
+	S2MPS15_REG_LDODVS3,
+	S2MPS15_REG_LDODVS4,
+	S2MPS15_REG_L1CTRL,
+	S2MPS15_REG_L2CTRL,
+	S2MPS15_REG_L3CTRL,
+	S2MPS15_REG_L4CTRL,
+	S2MPS15_REG_L5CTRL,
+	S2MPS15_REG_L6CTRL,
+	S2MPS15_REG_L7CTRL,
+	S2MPS15_REG_L8CTRL,
+	S2MPS15_REG_L9CTRL,
+	S2MPS15_REG_L10CTRL,
+	S2MPS15_REG_L11CTRL,
+	S2MPS15_REG_L12CTRL,
+	S2MPS15_REG_L13CTRL,
+	S2MPS15_REG_L14CTRL,
+	S2MPS15_REG_L15CTRL,
+	S2MPS15_REG_L16CTRL,
+	S2MPS15_REG_L17CTRL,
+	S2MPS15_REG_L18CTRL,
+	S2MPS15_REG_L19CTRL,
+	S2MPS15_REG_L20CTRL,
+	S2MPS15_REG_L21CTRL,
+	S2MPS15_REG_L22CTRL,
+	S2MPS15_REG_L23CTRL,
+	S2MPS15_REG_L24CTRL,
+	S2MPS15_REG_L25CTRL,
+	S2MPS15_REG_L26CTRL,
+	S2MPS15_REG_L27CTRL,
+	S2MPS15_REG_LDODSCH1,
+	S2MPS15_REG_LDODSCH2,
+	S2MPS15_REG_LDODSCH3,
+	S2MPS15_REG_LDODSCH4,
+};
+
+/* S2MPS15 regulator ids */
+enum s2mps15_regulators {
+	S2MPS15_LDO1,
+	S2MPS15_LDO2,
+	S2MPS15_LDO3,
+	S2MPS15_LDO4,
+	S2MPS15_LDO5,
+	S2MPS15_LDO6,
+	S2MPS15_LDO7,
+	S2MPS15_LDO8,
+	S2MPS15_LDO9,
+	S2MPS15_LDO10,
+	S2MPS15_LDO11,
+	S2MPS15_LDO12,
+	S2MPS15_LDO13,
+	S2MPS15_LDO14,
+	S2MPS15_LDO15,
+	S2MPS15_LDO16,
+	S2MPS15_LDO17,
+	S2MPS15_LDO18,
+	S2MPS15_LDO19,
+	S2MPS15_LDO20,
+	S2MPS15_LDO21,
+	S2MPS15_LDO22,
+	S2MPS15_LDO23,
+	S2MPS15_LDO24,
+	S2MPS15_LDO25,
+	S2MPS15_LDO26,
+	S2MPS15_LDO27,
+	S2MPS15_BUCK1,
+	S2MPS15_BUCK2,
+	S2MPS15_BUCK3,
+	S2MPS15_BUCK4,
+	S2MPS15_BUCK5,
+	S2MPS15_BUCK6,
+	S2MPS15_BUCK7,
+	S2MPS15_BUCK8,
+	S2MPS15_BUCK9,
+	S2MPS15_BUCK10,
+	S2MPS15_BUCK11,
+	S2MPS15_REGULATOR_MAX,
+};
+
+#define S2MPS15_LDO_VSEL_MASK		(0x3F)
+#define S2MPS15_BUCK_VSEL_MASK		(0xFF)
+
+#define S2MPS15_ENABLE_SHIFT		(0x06)
+#define S2MPS15_ENABLE_MASK		(0x03 << S2MPS15_ENABLE_SHIFT)
+
+#define S2MPS15_LDO_N_VOLTAGES		(S2MPS15_LDO_VSEL_MASK + 1)
+#define S2MPS15_BUCK_N_VOLTAGES	(S2MPS15_BUCK_VSEL_MASK + 1)
+
+#endif /* __LINUX_MFD_S2MPS15_H */
-- 
1.7.10.4


  parent reply	other threads:[~2015-10-30  6:25 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-30  6:25 [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-10-30  6:25 ` [PATCH v5 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC Alim Akhtar
2015-10-30  7:42   ` Krzysztof Kozlowski
2015-10-30  9:25     ` Alim Akhtar
2015-10-30 17:24   ` Lee Jones
2015-11-06 22:33   ` Rob Herring
2015-11-07  1:11     ` Alim Akhtar
2015-11-07  3:09     ` [rtc-linux] " Krzysztof Kozlowski
2015-11-09  5:54       ` Alim Akhtar
2015-11-09  6:40         ` Krzysztof Kozlowski
2015-10-30  6:25 ` Alim Akhtar [this message]
2015-10-30  6:25 ` [PATCH v5 3/4] regulator: s2mps11: add support for S2MPS15 regulators Alim Akhtar
2015-10-30  6:25 ` [PATCH v5 4/4] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC Alim Akhtar
2015-10-30  8:38   ` Krzysztof Kozlowski
2015-10-30  9:28     ` Alim Akhtar
2015-10-30 17:23   ` Lee Jones
2015-11-01 17:40   ` Alexandre Belloni
2015-11-01 23:46     ` Krzysztof Kozlowski
2015-11-02  0:47       ` Alexandre Belloni
2015-11-02  9:03         ` Lee Jones
2015-11-02 10:19           ` Alexandre Belloni
2015-11-02 10:58             ` Lee Jones
2015-11-19 18:00 ` [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-11-20  9:05   ` Lee Jones
2015-11-20  9:15     ` Alim Akhtar
2015-11-20 10:31       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446186334-16510-3-git-send-email-alim.akhtar@samsung.com \
    --to=alim.akhtar@samsung.com \
    --cc=broonie@kernel.org \
    --cc=k.kozlowski@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=thomas.ab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).