From: Kishon Vijay Abraham I <kishon@ti.com>
To: <kishon@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <rogerq@ti.com>, <nsekhar@ti.com>,
<linux-pci@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<tony@atomide.com>, <t-kristo@ti.com>
Subject: [PATCH v3 1/9] phy: ti-pipe3: introduce local struct device* in probe
Date: Tue, 15 Dec 2015 14:46:00 +0530 [thread overview]
Message-ID: <1450170968-11282-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450170968-11282-1-git-send-email-kishon@ti.com>
No functional change. Introduce local struct device pointer in
probe and replace using &pdev->dev/phy->dev with the local
device pointer. This is in preparation to split ti_pipe3_probe
and add separate functions for getting mem resource, getting
sysctrl and getting clocks.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-ti-pipe3.c | 54 ++++++++++++++++++++++----------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 93bc112..c511105 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -319,40 +319,41 @@ static int ti_pipe3_probe(struct platform_device *pdev)
struct platform_device *control_pdev;
const struct of_device_id *match;
struct clk *clk;
+ struct device *dev = &pdev->dev;
- phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
- phy->dev = &pdev->dev;
+ phy->dev = dev;
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- match = of_match_device(ti_pipe3_id_table, &pdev->dev);
+ match = of_match_device(ti_pipe3_id_table, dev);
if (!match)
return -EINVAL;
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
if (!phy->dpll_map) {
- dev_err(&pdev->dev, "no DPLL data\n");
+ dev_err(dev, "no DPLL data\n");
return -EINVAL;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pll_ctrl");
- phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
if (IS_ERR(phy->pll_ctrl_base))
return PTR_ERR(phy->pll_ctrl_base);
- phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
+ phy->sys_clk = devm_clk_get(dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
- dev_err(&pdev->dev, "unable to get sysclk\n");
+ dev_err(dev, "unable to get sysclk\n");
return -EINVAL;
}
}
- phy->refclk = devm_clk_get(phy->dev, "refclk");
+ phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
- dev_err(&pdev->dev, "unable to get refclk\n");
+ dev_err(dev, "unable to get refclk\n");
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
@@ -361,9 +362,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
- phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+ phy->wkupclk = devm_clk_get(dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get wkupclk\n");
+ dev_err(dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
} else {
@@ -371,14 +372,14 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pllreset");
if (IS_ERR(phy->dpll_reset_syscon)) {
- dev_info(&pdev->dev,
+ dev_info(dev,
"can't get syscon-pllreset, sata dpll won't idle\n");
phy->dpll_reset_syscon = NULL;
} else {
if (of_property_read_u32_index(node,
"syscon-pllreset", 1,
&phy->dpll_reset_reg)) {
- dev_err(&pdev->dev,
+ dev_err(dev,
"couldn't get pllreset reg. offset\n");
return -EINVAL;
}
@@ -387,30 +388,30 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- clk = devm_clk_get(phy->dev, "dpll_ref");
+ clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref clk\n");
+ dev_err(dev, "unable to get dpll ref clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 1500000000);
- clk = devm_clk_get(phy->dev, "dpll_ref_m2");
+ clk = devm_clk_get(dev, "dpll_ref_m2");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
+ dev_err(dev, "unable to get dpll ref m2 clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- clk = devm_clk_get(phy->dev, "phy-div");
+ clk = devm_clk_get(dev, "phy-div");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get phy-div clk\n");
+ dev_err(dev, "unable to get phy-div clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- phy->div_clk = devm_clk_get(phy->dev, "div-clk");
+ phy->div_clk = devm_clk_get(dev, "div-clk");
if (IS_ERR(phy->div_clk)) {
- dev_err(&pdev->dev, "unable to get div-clk\n");
+ dev_err(dev, "unable to get div-clk\n");
return PTR_ERR(phy->div_clk);
}
} else {
@@ -419,13 +420,13 @@ static int ti_pipe3_probe(struct platform_device *pdev)
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
- dev_err(&pdev->dev, "Failed to get control device phandle\n");
+ dev_err(dev, "Failed to get control device phandle\n");
return -EINVAL;
}
control_pdev = of_find_device_by_node(control_node);
if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
+ dev_err(dev, "Failed to get control device\n");
return -EINVAL;
}
@@ -434,7 +435,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
omap_control_phy_power(phy->control_dev, 0);
platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
+ pm_runtime_enable(dev);
/*
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
@@ -446,13 +447,12 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
}
- generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ generic_phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
- phy_provider = devm_of_phy_provider_register(phy->dev,
- of_phy_simple_xlate);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
--
1.7.9.5
next prev parent reply other threads:[~2015-12-15 9:22 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 9:15 [PATCH v3 0/9] phy: use syscon framework APIs to set ctrl mod reg Kishon Vijay Abraham I
2015-12-15 9:16 ` Kishon Vijay Abraham I [this message]
2015-12-15 9:16 ` [PATCH v3 2/9] phy: ti-pipe3: move clk initialization to a separate function Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 3/9] phy: ti-pipe3: move sysctrl " Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 4/9] phy: ti-pipe3: move mem resource " Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 5/9] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 6/9] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-20 3:38 ` Rob Herring
2015-12-21 8:36 ` Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 7/9] phy: ti-pipe3: use *syscon* framework API to set PCS value of " Kishon Vijay Abraham I
2015-12-20 3:38 ` Rob Herring
2015-12-15 9:16 ` [PATCH v3 8/9] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-15 9:16 ` [PATCH v3 9/9] phy: omap-usb2: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-20 3:39 ` Rob Herring
2015-12-20 12:07 ` Kishon Vijay Abraham I
2015-12-22 18:19 ` Rob Herring
2015-12-15 10:56 ` [PATCH v3 0/9] phy: use syscon framework APIs to set ctrl mod reg Arnd Bergmann
2015-12-15 11:14 ` Kishon Vijay Abraham I
2015-12-15 11:55 ` Arnd Bergmann
2015-12-15 12:46 ` Kishon Vijay Abraham I
2015-12-15 15:26 ` Tony Lindgren
2015-12-18 10:16 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450170968-11282-2-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).