linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: MaJun <majun258@huawei.com>
To: <Catalin.Marinas@arm.com>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <Will.Deacon@arm.com>,
	<mark.rutland@arm.com>, <marc.zyngier@arm.com>,
	<jason@lakedaemon.net>, <tglx@linutronix.de>,
	<lizefan@huawei.com>, <huxinwei@huawei.com>,
	<dingtianhong@huawei.com>, <zhaojunhua@hisilicon.com>,
	<liguozhu@hisilicon.com>, <xuwei5@hisilicon.com>,
	<wei.chenwei@hisilicon.com>, <guohanjun@huawei.com>,
	<wuyun.wu@huawei.com>, <guodong.xu@linaro.org>,
	<haojian.zhuang@linaro.org>, <zhangfei.gao@linaro.org>,
	<usman.ahmad@linaro.org>, <klimov.linux@gmail.com>,
	<gabriele.paoloni@huawei.com>, <majun258@huawei.com>
Subject: [PATCH v10 3/4] irqchip:create irq domain for each mbigen device
Date: Thu, 17 Dec 2015 19:56:36 +0800	[thread overview]
Message-ID: <1450353397-47668-4-git-send-email-majun258@huawei.com> (raw)
In-Reply-To: <1450353397-47668-1-git-send-email-majun258@huawei.com>

From: Ma Jun <majun258@huawei.com>

For peripheral devices which connect to mbigen,mbigen is a interrupt
controller. So, we create irq domain for each mbigen device and add
mbigen irq domain into irq hierarchy structure.

Signed-off-by: Ma Jun <majun258@huawei.com>
---
 drivers/irqchip/irq-mbigen.c |  138 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 138 insertions(+), 0 deletions(-)

diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 9f036c2..98865b1 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -16,13 +16,39 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
 #include <linux/module.h>
+#include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+/* Interrupt numbers per mbigen node supported */
+#define IRQS_PER_MBIGEN_NODE		128
+
+/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */
+#define RESERVED_IRQ_PER_MBIGEN_CHIP	64
+
+/* The maximum IRQ pin number of mbigen chip(start from 0) */
+#define MAXIMUM_IRQ_PIN_NUM		1407
+
+/**
+ * In mbigen vector register
+ * bit[21:12]:	event id value
+ * bit[11:0]:	device id
+ */
+#define IRQ_EVENT_ID_SHIFT		12
+#define IRQ_EVENT_ID_MASK		0x3ff
+
+/* register range of each mbigen node */
+#define MBIGEN_NODE_OFFSET		0x1000
+
+/* offset of vector register in mbigen node */
+#define REG_MBIGEN_VEC_OFFSET		0x200
+
 /**
  * struct mbigen_device - holds the information of mbigen device.
  *
@@ -34,10 +60,107 @@ struct mbigen_device {
 	void __iomem		*base;
 };
 
+static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
+{
+	unsigned int nid, pin;
+
+	hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
+	nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
+	pin = hwirq % IRQS_PER_MBIGEN_NODE;
+
+	return pin * 4 + nid * MBIGEN_NODE_OFFSET
+			+ REG_MBIGEN_VEC_OFFSET;
+}
+
+static struct irq_chip mbigen_irq_chip = {
+	.name =			"mbigen-v2",
+};
+
+static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+	struct irq_data *d = irq_get_irq_data(desc->irq);
+	void __iomem *base = d->chip_data;
+	u32 val;
+
+	base += get_mbigen_vec_reg(d->hwirq);
+	val = readl_relaxed(base);
+
+	val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
+	val |= (msg->data << IRQ_EVENT_ID_SHIFT);
+
+	/* The address of doorbell is encoded in mbigen register by default
+	 * So,we don't need to program the doorbell address at here
+	 */
+	writel_relaxed(val, base);
+}
+
+static int mbigen_domain_translate(struct irq_domain *d,
+				    struct irq_fwspec *fwspec,
+				    unsigned long *hwirq,
+				    unsigned int *type)
+{
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 2)
+			return -EINVAL;
+
+		if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) ||
+			(fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP))
+			return -EINVAL;
+		else
+			*hwirq = fwspec->param[0];
+
+		/* If there is no valid irq type, just use the default type */
+		if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) ||
+			(fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH))
+			*type = fwspec->param[1];
+		else
+			*type = IRQ_TYPE_NONE;
+
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int mbigen_irq_domain_alloc(struct irq_domain *domain,
+					unsigned int virq,
+					unsigned int nr_irqs,
+					void *args)
+{
+	struct irq_fwspec *fwspec = args;
+	irq_hw_number_t hwirq;
+	unsigned int type;
+	struct mbigen_device *mgn_chip;
+	int i, err;
+
+	err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
+	if (err)
+		return err;
+
+	err = platform_msi_domain_alloc(domain, virq, nr_irqs);
+	if (err)
+		return err;
+
+	mgn_chip = platform_msi_get_host_data(domain);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+				      &mbigen_irq_chip, mgn_chip->base);
+
+	return 0;
+}
+
+static struct irq_domain_ops mbigen_domain_ops = {
+	.translate	= mbigen_domain_translate,
+	.alloc		= mbigen_irq_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
+};
+
 static int mbigen_device_probe(struct platform_device *pdev)
 {
 	struct mbigen_device *mgn_chip;
 	struct resource *res;
+	struct irq_domain *domain;
+	u32 num_msis;
 
 	mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
 	if (!mgn_chip)
@@ -50,8 +173,23 @@ static int mbigen_device_probe(struct platform_device *pdev)
 	if (IS_ERR(mgn_chip->base))
 		return PTR_ERR(mgn_chip->base);
 
+	if (of_property_read_u32(pdev->dev.of_node, "num-msis", &num_msis) < 0) {
+		dev_err(&pdev->dev, "No num-msis property\n");
+		return -EINVAL;
+	}
+
+	domain = platform_msi_create_device_domain(&pdev->dev, num_msis,
+							mbigen_write_msg,
+							&mbigen_domain_ops,
+							mgn_chip);
+
+	if (!domain)
+		return -ENOMEM;
+
 	platform_set_drvdata(pdev, mgn_chip);
 
+	dev_info(&pdev->dev, "Probing ok, allocated %d MSIs\n", num_msis);
+
 	return 0;
 }
 
-- 
1.7.1



  parent reply	other threads:[~2015-12-17 12:14 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-17 11:56 [PATCH v10 0/4] irqchip:support mbigen interrupt controller MaJun
2015-12-17 11:56 ` [PATCH v10 1/4] dt-binding:Documents of the mbigen bindings MaJun
2015-12-17 13:52   ` Mark Rutland
2015-12-18  1:58     ` majun (F)
2015-12-18 10:58       ` Mark Rutland
2015-12-18 11:26         ` Marc Zyngier
2015-12-18 11:35         ` Marc Zyngier
2015-12-18 11:54           ` Mark Rutland
2015-12-17 11:56 ` [PATCH v10 2/4] irqchip: add platform device driver for mbigen device MaJun
2015-12-17 11:56 ` MaJun [this message]
2015-12-17 16:02   ` [PATCH v10 3/4] irqchip:create irq domain for each " Marc Zyngier
2015-12-18 11:02   ` Mark Rutland
2015-12-18 11:27     ` Marc Zyngier
2015-12-17 11:56 ` [PATCH v10 4/4] irqchip:implement the mbigen irq chip operation functions MaJun
2015-12-17 16:03   ` Marc Zyngier
2015-12-17 16:06 ` [PATCH v10 0/4] irqchip:support mbigen interrupt controller Marc Zyngier
2015-12-18 11:58 ` Marc Zyngier
2015-12-18 12:27   ` Hanjun Guo
2015-12-18 14:03   ` majun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450353397-47668-4-git-send-email-majun258@huawei.com \
    --to=majun258@huawei.com \
    --cc=Catalin.Marinas@arm.com \
    --cc=Will.Deacon@arm.com \
    --cc=dingtianhong@huawei.com \
    --cc=gabriele.paoloni@huawei.com \
    --cc=guodong.xu@linaro.org \
    --cc=guohanjun@huawei.com \
    --cc=haojian.zhuang@linaro.org \
    --cc=huxinwei@huawei.com \
    --cc=jason@lakedaemon.net \
    --cc=klimov.linux@gmail.com \
    --cc=liguozhu@hisilicon.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lizefan@huawei.com \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=tglx@linutronix.de \
    --cc=usman.ahmad@linaro.org \
    --cc=wei.chenwei@hisilicon.com \
    --cc=wuyun.wu@huawei.com \
    --cc=xuwei5@hisilicon.com \
    --cc=zhangfei.gao@linaro.org \
    --cc=zhaojunhua@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).