* [PATCH v6 00/12] Add T210 support in Tegra soctherm
@ 2016-02-22 8:06 Wei Ni
2016-02-22 8:14 ` Wei Ni
0 siblings, 1 reply; 7+ messages in thread
From: Wei Ni @ 2016-02-22 8:06 UTC (permalink / raw)
To: thierry.reding, rui.zhang
Cc: MLongnecker, swarren, mikko.perttunen, linux-tegra, linux-kernel, Wei Ni
This patchset adds following functions for tegra_soctherm driver:
1. add T210 support.
2. export debugfs to show some registers.
3. add thermtrip funciton.
4. add suspend/resume function.
The v5 serial is in:
http://www.spinics.net/lists/linux-tegra/msg25079.html
The v4 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24972.html
The V3 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24911.html
The V2 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24901.html
The V1 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24808.html
Main changes from V5:
1. Change to use linux thermal framework to implement
thermtrip funciton, per Rob's comment.
2. Add .set_trip_temp() in of-thermal driver, so that
we can set trips on hardware.
Main changes from V4:
1. Change description of devicetree binding per Rob's comment.
2. Call of_node_put to decrement refcount of the node.
Main changes from V3:
1. Change structures to "const" in chip specific files.
2. Minor changes per Thieery's comments.
Main changes from V2:
1. Fix build error in patch [1/11].
2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
Main changes from V1:
1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
2. Changes per Thieery's other comments.
Wei Ni (12):
thermal: tegra: move tegra thermal files into tegra directory
thermal: tegra: combine sensor group-related data
thermal: tegra: get rid of PDIV/HOTSPOT hack
thermal: tegra: split tegra_soctherm driver
thermal: tegra: add Tegra210 specific SOC_THERM driver
thermal: tegra: add a debugfs to show registers
thermal: of-thermal: allow setting trip_temp on hardware
of: add notes of critical trips for soctherm
thermal: tegra: add thermtrip function
thermal: tegra: add PM support
arm64: tegra: add soctherm node for Tegra210
arm: tegra: set critical trips for Tegra124
.../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
arch/arm/boot/dts/tegra124.dtsi | 16 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
drivers/thermal/Kconfig | 12 +-
drivers/thermal/Makefile | 2 +-
drivers/thermal/of-thermal.c | 8 +
drivers/thermal/tegra/Kconfig | 13 +
drivers/thermal/tegra/Makefile | 5 +
drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
drivers/thermal/tegra/soctherm.h | 123 ++++
drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
drivers/thermal/tegra_soctherm.c | 476 --------------
include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
include/linux/thermal.h | 1 +
16 files changed, 1489 insertions(+), 487 deletions(-)
create mode 100644 drivers/thermal/tegra/Kconfig
create mode 100644 drivers/thermal/tegra/Makefile
create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
create mode 100644 drivers/thermal/tegra/soctherm.c
create mode 100644 drivers/thermal/tegra/soctherm.h
create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
delete mode 100644 drivers/thermal/tegra_soctherm.c
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm
2016-02-22 8:06 [PATCH v6 00/12] Add T210 support in Tegra soctherm Wei Ni
@ 2016-02-22 8:14 ` Wei Ni
0 siblings, 0 replies; 7+ messages in thread
From: Wei Ni @ 2016-02-22 8:14 UTC (permalink / raw)
To: thierry.reding, rui.zhang
Cc: MLongnecker, swarren, mikko.perttunen, linux-tegra, linux-kernel
I sent this patch twice, please ignore this one.
On 2016年02月22日 16:06, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
>
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
>
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
>
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
>
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
>
> Wei Ni (12):
> thermal: tegra: move tegra thermal files into tegra directory
> thermal: tegra: combine sensor group-related data
> thermal: tegra: get rid of PDIV/HOTSPOT hack
> thermal: tegra: split tegra_soctherm driver
> thermal: tegra: add Tegra210 specific SOC_THERM driver
> thermal: tegra: add a debugfs to show registers
> thermal: of-thermal: allow setting trip_temp on hardware
> of: add notes of critical trips for soctherm
> thermal: tegra: add thermtrip function
> thermal: tegra: add PM support
> arm64: tegra: add soctherm node for Tegra210
> arm: tegra: set critical trips for Tegra124
>
> .../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
> arch/arm/boot/dts/tegra124.dtsi | 16 +
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
> drivers/thermal/Kconfig | 12 +-
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/of-thermal.c | 8 +
> drivers/thermal/tegra/Kconfig | 13 +
> drivers/thermal/tegra/Makefile | 5 +
> drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
> drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
> drivers/thermal/tegra/soctherm.h | 123 ++++
> drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
> drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
> drivers/thermal/tegra_soctherm.c | 476 --------------
> include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
> include/linux/thermal.h | 1 +
> 16 files changed, 1489 insertions(+), 487 deletions(-)
> create mode 100644 drivers/thermal/tegra/Kconfig
> create mode 100644 drivers/thermal/tegra/Makefile
> create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
> create mode 100644 drivers/thermal/tegra/soctherm.c
> create mode 100644 drivers/thermal/tegra/soctherm.h
> create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
> delete mode 100644 drivers/thermal/tegra_soctherm.c
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm
2016-02-22 8:05 Wei Ni
2016-02-22 8:18 ` Wei Ni
2016-02-22 18:31 ` Matt Longnecker
@ 2016-02-29 5:54 ` Wei Ni
2 siblings, 0 replies; 7+ messages in thread
From: Wei Ni @ 2016-02-29 5:54 UTC (permalink / raw)
To: thierry.reding, rui.zhang, edubezval
Cc: MLongnecker, swarren, mikko.perttunen, linux-tegra, linux-kernel
Hi,
Does anyone have comments on this series?
Thanks.
Wei.
On 2016年02月22日 16:05, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
>
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
>
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
>
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
>
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
>
> Wei Ni (12):
> thermal: tegra: move tegra thermal files into tegra directory
> thermal: tegra: combine sensor group-related data
> thermal: tegra: get rid of PDIV/HOTSPOT hack
> thermal: tegra: split tegra_soctherm driver
> thermal: tegra: add Tegra210 specific SOC_THERM driver
> thermal: tegra: add a debugfs to show registers
> thermal: of-thermal: allow setting trip_temp on hardware
> of: add notes of critical trips for soctherm
> thermal: tegra: add thermtrip function
> thermal: tegra: add PM support
> arm64: tegra: add soctherm node for Tegra210
> arm: tegra: set critical trips for Tegra124
>
> .../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
> arch/arm/boot/dts/tegra124.dtsi | 16 +
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
> drivers/thermal/Kconfig | 12 +-
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/of-thermal.c | 8 +
> drivers/thermal/tegra/Kconfig | 13 +
> drivers/thermal/tegra/Makefile | 5 +
> drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
> drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
> drivers/thermal/tegra/soctherm.h | 123 ++++
> drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
> drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
> drivers/thermal/tegra_soctherm.c | 476 --------------
> include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
> include/linux/thermal.h | 1 +
> 16 files changed, 1489 insertions(+), 487 deletions(-)
> create mode 100644 drivers/thermal/tegra/Kconfig
> create mode 100644 drivers/thermal/tegra/Makefile
> create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
> create mode 100644 drivers/thermal/tegra/soctherm.c
> create mode 100644 drivers/thermal/tegra/soctherm.h
> create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
> delete mode 100644 drivers/thermal/tegra_soctherm.c
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm
2016-02-22 18:31 ` Matt Longnecker
@ 2016-02-23 2:14 ` Wei Ni
0 siblings, 0 replies; 7+ messages in thread
From: Wei Ni @ 2016-02-23 2:14 UTC (permalink / raw)
To: Matt Longnecker, thierry.reding, rui.zhang
Cc: swarren, mikko.perttunen, linux-tegra, linux-kernel
On 2016年02月23日 02:31, Matt Longnecker wrote:
> Wei,
>
> Should changes to of-thermal should be discussed on linux-pm as opposed to just
> linux-tegra and lkml?
>
> Should you include Eduardo on the thread?
The [PATCH v6 07/12] has the changes to of-thermal, I added Eduardo in the "To:"
list in that patch, but didn't include linux-pm, I will add it.
>
> -Matt
>
> On 02/22/2016 12:05 AM, Wei Ni wrote:
>> This patchset adds following functions for tegra_soctherm driver:
>> 1. add T210 support.
>> 2. export debugfs to show some registers.
>> 3. add thermtrip funciton.
>> 4. add suspend/resume function.
>>
>> The v5 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg25079.html
>> The v4 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24972.html
>> The V3 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24911.html
>> The V2 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24901.html
>> The V1 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24808.html
>>
>> Main changes from V5:
>> 1. Change to use linux thermal framework to implement
>> thermtrip funciton, per Rob's comment.
>> 2. Add .set_trip_temp() in of-thermal driver, so that
>> we can set trips on hardware.
>>
>> Main changes from V4:
>> 1. Change description of devicetree binding per Rob's comment.
>> 2. Call of_node_put to decrement refcount of the node.
>>
>> Main changes from V3:
>> 1. Change structures to "const" in chip specific files.
>> 2. Minor changes per Thieery's comments.
>>
>> Main changes from V2:
>> 1. Fix build error in patch [1/11].
>> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
>> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>>
>> Main changes from V1:
>> 1. Use the new type to handl different Tegra chips in one driver, which
>> suggested by Thierry.
>> 2. Changes per Thieery's other comments.
>>
>> Wei Ni (12):
>> thermal: tegra: move tegra thermal files into tegra directory
>> thermal: tegra: combine sensor group-related data
>> thermal: tegra: get rid of PDIV/HOTSPOT hack
>> thermal: tegra: split tegra_soctherm driver
>> thermal: tegra: add Tegra210 specific SOC_THERM driver
>> thermal: tegra: add a debugfs to show registers
>> thermal: of-thermal: allow setting trip_temp on hardware
>> of: add notes of critical trips for soctherm
>> thermal: tegra: add thermtrip function
>> thermal: tegra: add PM support
>> arm64: tegra: add soctherm node for Tegra210
>> arm: tegra: set critical trips for Tegra124
>>
>> .../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
>> arch/arm/boot/dts/tegra124.dtsi | 16 +
>> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
>> drivers/thermal/Kconfig | 12 +-
>> drivers/thermal/Makefile | 2 +-
>> drivers/thermal/of-thermal.c | 8 +
>> drivers/thermal/tegra/Kconfig | 13 +
>> drivers/thermal/tegra/Makefile | 5 +
>> drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
>> drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
>> drivers/thermal/tegra/soctherm.h | 123 ++++
>> drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
>> drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
>> drivers/thermal/tegra_soctherm.c | 476 --------------
>> include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
>> include/linux/thermal.h | 1 +
>> 16 files changed, 1489 insertions(+), 487 deletions(-)
>> create mode 100644 drivers/thermal/tegra/Kconfig
>> create mode 100644 drivers/thermal/tegra/Makefile
>> create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
>> create mode 100644 drivers/thermal/tegra/soctherm.c
>> create mode 100644 drivers/thermal/tegra/soctherm.h
>> create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
>> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>> delete mode 100644 drivers/thermal/tegra_soctherm.c
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm
2016-02-22 8:05 Wei Ni
2016-02-22 8:18 ` Wei Ni
@ 2016-02-22 18:31 ` Matt Longnecker
2016-02-23 2:14 ` Wei Ni
2016-02-29 5:54 ` Wei Ni
2 siblings, 1 reply; 7+ messages in thread
From: Matt Longnecker @ 2016-02-22 18:31 UTC (permalink / raw)
To: Wei Ni, thierry.reding, rui.zhang
Cc: swarren, mikko.perttunen, linux-tegra, linux-kernel
Wei,
Should changes to of-thermal should be discussed on linux-pm as opposed
to just linux-tegra and lkml?
Should you include Eduardo on the thread?
-Matt
On 02/22/2016 12:05 AM, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
>
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
>
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
>
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
>
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
>
> Wei Ni (12):
> thermal: tegra: move tegra thermal files into tegra directory
> thermal: tegra: combine sensor group-related data
> thermal: tegra: get rid of PDIV/HOTSPOT hack
> thermal: tegra: split tegra_soctherm driver
> thermal: tegra: add Tegra210 specific SOC_THERM driver
> thermal: tegra: add a debugfs to show registers
> thermal: of-thermal: allow setting trip_temp on hardware
> of: add notes of critical trips for soctherm
> thermal: tegra: add thermtrip function
> thermal: tegra: add PM support
> arm64: tegra: add soctherm node for Tegra210
> arm: tegra: set critical trips for Tegra124
>
> .../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
> arch/arm/boot/dts/tegra124.dtsi | 16 +
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
> drivers/thermal/Kconfig | 12 +-
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/of-thermal.c | 8 +
> drivers/thermal/tegra/Kconfig | 13 +
> drivers/thermal/tegra/Makefile | 5 +
> drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
> drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
> drivers/thermal/tegra/soctherm.h | 123 ++++
> drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
> drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
> drivers/thermal/tegra_soctherm.c | 476 --------------
> include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
> include/linux/thermal.h | 1 +
> 16 files changed, 1489 insertions(+), 487 deletions(-)
> create mode 100644 drivers/thermal/tegra/Kconfig
> create mode 100644 drivers/thermal/tegra/Makefile
> create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
> create mode 100644 drivers/thermal/tegra/soctherm.c
> create mode 100644 drivers/thermal/tegra/soctherm.h
> create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
> delete mode 100644 drivers/thermal/tegra_soctherm.c
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm
2016-02-22 8:05 Wei Ni
@ 2016-02-22 8:18 ` Wei Ni
2016-02-22 18:31 ` Matt Longnecker
2016-02-29 5:54 ` Wei Ni
2 siblings, 0 replies; 7+ messages in thread
From: Wei Ni @ 2016-02-22 8:18 UTC (permalink / raw)
To: thierry.reding, rui.zhang
Cc: MLongnecker, swarren, mikko.perttunen, linux-tegra, linux-kernel
In the V5 series, there has discussion about how to implement thermtrip (shut
down) function, so I sent out this V6 series, which use Linux thermal framework
to implement it, for more discussion.
Thierry,
It looks there are no comments on patches 01~06 from V4, if no more comments,
will your take these patches first?
Thanks.
Wei.
On 2016年02月22日 16:05, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
>
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
>
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
>
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
>
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
>
> Wei Ni (12):
> thermal: tegra: move tegra thermal files into tegra directory
> thermal: tegra: combine sensor group-related data
> thermal: tegra: get rid of PDIV/HOTSPOT hack
> thermal: tegra: split tegra_soctherm driver
> thermal: tegra: add Tegra210 specific SOC_THERM driver
> thermal: tegra: add a debugfs to show registers
> thermal: of-thermal: allow setting trip_temp on hardware
> of: add notes of critical trips for soctherm
> thermal: tegra: add thermtrip function
> thermal: tegra: add PM support
> arm64: tegra: add soctherm node for Tegra210
> arm: tegra: set critical trips for Tegra124
>
> .../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
> arch/arm/boot/dts/tegra124.dtsi | 16 +
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
> drivers/thermal/Kconfig | 12 +-
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/of-thermal.c | 8 +
> drivers/thermal/tegra/Kconfig | 13 +
> drivers/thermal/tegra/Makefile | 5 +
> drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
> drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
> drivers/thermal/tegra/soctherm.h | 123 ++++
> drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
> drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
> drivers/thermal/tegra_soctherm.c | 476 --------------
> include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
> include/linux/thermal.h | 1 +
> 16 files changed, 1489 insertions(+), 487 deletions(-)
> create mode 100644 drivers/thermal/tegra/Kconfig
> create mode 100644 drivers/thermal/tegra/Makefile
> create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
> create mode 100644 drivers/thermal/tegra/soctherm.c
> create mode 100644 drivers/thermal/tegra/soctherm.h
> create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
> delete mode 100644 drivers/thermal/tegra_soctherm.c
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v6 00/12] Add T210 support in Tegra soctherm
@ 2016-02-22 8:05 Wei Ni
2016-02-22 8:18 ` Wei Ni
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Wei Ni @ 2016-02-22 8:05 UTC (permalink / raw)
To: thierry.reding, rui.zhang
Cc: MLongnecker, swarren, mikko.perttunen, linux-tegra, linux-kernel, Wei Ni
This patchset adds following functions for tegra_soctherm driver:
1. add T210 support.
2. export debugfs to show some registers.
3. add thermtrip funciton.
4. add suspend/resume function.
The v5 serial is in:
http://www.spinics.net/lists/linux-tegra/msg25079.html
The v4 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24972.html
The V3 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24911.html
The V2 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24901.html
The V1 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24808.html
Main changes from V5:
1. Change to use linux thermal framework to implement
thermtrip funciton, per Rob's comment.
2. Add .set_trip_temp() in of-thermal driver, so that
we can set trips on hardware.
Main changes from V4:
1. Change description of devicetree binding per Rob's comment.
2. Call of_node_put to decrement refcount of the node.
Main changes from V3:
1. Change structures to "const" in chip specific files.
2. Minor changes per Thieery's comments.
Main changes from V2:
1. Fix build error in patch [1/11].
2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
Main changes from V1:
1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
2. Changes per Thieery's other comments.
Wei Ni (12):
thermal: tegra: move tegra thermal files into tegra directory
thermal: tegra: combine sensor group-related data
thermal: tegra: get rid of PDIV/HOTSPOT hack
thermal: tegra: split tegra_soctherm driver
thermal: tegra: add Tegra210 specific SOC_THERM driver
thermal: tegra: add a debugfs to show registers
thermal: of-thermal: allow setting trip_temp on hardware
of: add notes of critical trips for soctherm
thermal: tegra: add thermtrip function
thermal: tegra: add PM support
arm64: tegra: add soctherm node for Tegra210
arm: tegra: set critical trips for Tegra124
.../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
arch/arm/boot/dts/tegra124.dtsi | 16 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 60 ++
drivers/thermal/Kconfig | 12 +-
drivers/thermal/Makefile | 2 +-
drivers/thermal/of-thermal.c | 8 +
drivers/thermal/tegra/Kconfig | 13 +
drivers/thermal/tegra/Makefile | 5 +
drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
drivers/thermal/tegra/soctherm.c | 685 +++++++++++++++++++++
drivers/thermal/tegra/soctherm.h | 123 ++++
drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
drivers/thermal/tegra_soctherm.c | 476 --------------
include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
include/linux/thermal.h | 1 +
16 files changed, 1489 insertions(+), 487 deletions(-)
create mode 100644 drivers/thermal/tegra/Kconfig
create mode 100644 drivers/thermal/tegra/Makefile
create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
create mode 100644 drivers/thermal/tegra/soctherm.c
create mode 100644 drivers/thermal/tegra/soctherm.h
create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
delete mode 100644 drivers/thermal/tegra_soctherm.c
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-02-29 5:54 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-22 8:06 [PATCH v6 00/12] Add T210 support in Tegra soctherm Wei Ni
2016-02-22 8:14 ` Wei Ni
-- strict thread matches above, loose matches on Subject: below --
2016-02-22 8:05 Wei Ni
2016-02-22 8:18 ` Wei Ni
2016-02-22 18:31 ` Matt Longnecker
2016-02-23 2:14 ` Wei Ni
2016-02-29 5:54 ` Wei Ni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).