[RESEND PATCH v5 0/5] Make cpuid <-> nodeid mapping persistent

[RESEND PATCH v5 0/5] Make cpuid <-> nodeid mapping persistent

[Zhu Guihua]

[Problem]

cpuid <-> nodeid mapping is firstly established at boot time. And workqueue caches
the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.

When doing node online/offline, cpuid <-> nodeid mapping is established/destroyed,
which means, cpuid <-> nodeid mapping will change if node hotplug happens. But
workqueue does not update wq_numa_possible_cpumask.

So here is the problem:

Assume we have the following cpuid <-> nodeid in the beginning:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89
node 2 | 30-44, 90-104
node 3 | 45-59, 105-119

and we hot-remove node2 and node3, it becomes:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89

and we hot-add node4 and node5, it becomes:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89
node 4 | 30-59
node 5 | 90-119

But in wq_numa_possible_cpumask, cpu30 is still mapped to node2, and the like.

When a pool workqueue is initialized, if its cpumask belongs to a node, its
pool->node will be mapped to that node. And memory used by this workqueue will
also be allocated on that node.

static struct worker_pool *get_unbound_pool(const struct workqueue_attrs *attrs){
...
        /* if cpumask is contained inside a NUMA node, we belong to that node */
        if (wq_numa_enabled) {
                for_each_node(node) {
                        if (cpumask_subset(pool->attrs->cpumask,
                                           wq_numa_possible_cpumask[node])) {
                                pool->node = node;
                                break;
                        }
                }
        }

Since wq_numa_possible_cpumask is not updated, it could be mapped to an offline node,
which will lead to memory allocation failure:

 SLUB: Unable to allocate memory on node 2 (gfp=0x80d0)
  cache: kmalloc-192, object size: 192, buffer size: 192, default order: 1, min order: 0
  node 0: slabs: 6172, objs: 259224, free: 245741
  node 1: slabs: 3261, objs: 136962, free: 127656

It happens here:

create_worker(struct worker_pool *pool)
 |--> worker = alloc_worker(pool->node);

static struct worker *alloc_worker(int node)
{
        struct worker *worker;

        worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, node); --> Here, useing the wrong node.

        ......

        return worker;
}


[Solution]

There are four mappings in the kernel:
1. nodeid (logical node id)   <->   pxm
2. apicid (physical cpu id)   <->   nodeid
3. cpuid (logical cpu id)     <->   apicid
4. cpuid (logical cpu id)     <->   nodeid

1. pxm (proximity domain) is provided by ACPI firmware in SRAT, and nodeid <-> pxm
   mapping is setup at boot time. This mapping is persistent, won't change.

2. apicid <-> nodeid mapping is setup using info in 1. The mapping is setup at boot
   time and CPU hotadd time, and cleared at CPU hotremove time. This mapping is also
   persistent.

3. cpuid <-> apicid mapping is setup at boot time and CPU hotadd time. cpuid is
   allocated, lower ids first, and released at CPU hotremove time, reused for other
   hotadded CPUs. So this mapping is not persistent.

4. cpuid <-> nodeid mapping is also setup at boot time and CPU hotadd time, and
   cleared at CPU hotremove time. As a result of 3, this mapping is not persistent.

To fix this problem, we establish cpuid <-> nodeid mapping for all the possible
cpus at boot time, and make it persistent. And according to init_cpu_to_node(),
cpuid <-> nodeid mapping is based on apicid <-> nodeid mapping and cpuid <-> apicid
mapping. So the key point is obtaining all cpus' apicid.

apicid can be obtained by _MAT (Multiple APIC Table Entry) method or found in
MADT (Multiple APIC Description Table). So we finish the job in the following steps:

1. Enable apic registeration flow to handle both enabled and disabled cpus.
   This is done by introducing an extra parameter to generic_processor_info to let the
   caller control if disabled cpus are ignored.

2. Introduce a new array storing all possible cpuid <-> apicid mapping. And also modify
   the way cpuid is calculated. Establish all possible cpuid <-> apicid mapping when
   registering local apic. Store the mapping in this array.

3. Enable _MAT and MADT relative apis to return non-presnet or disabled cpus' apicid.
   This is also done by introducing an extra parameter to these apis to let the caller
   control if disabled cpus are ignored.

4. Establish all possible cpuid <-> nodeid mapping.
   This is done via an additional acpi namespace walk for processors.


For previous discussion, please refer to:
https://lkml.org/lkml/2015/2/27/145
https://lkml.org/lkml/2015/3/25/989
https://lkml.org/lkml/2015/5/14/244
https://lkml.org/lkml/2015/7/7/200
https://lkml.org/lkml/2015/9/27/209

Change log v4 -> v5:
1. Remove useless code in patch 1.
2. Small improvement of commit message.

Change log v3 -> v4:
1. Fix the kernel panic at boot time. The cause is that I tried to build zonelists
   before per cpu areas were initialized.

Change log v2 -> v3:
1. Online memory-less nodes at boot time to map cpus of memory-less nodes.
2. Build zonelists for memory-less nodes so that memory allocator will fall 
   back to proper nodes automatically.

Change log v1 -> v2:
1. Split code movement and actual changes. Add patch 1.
2. Synchronize best near online node record when node hotplug happens. In patch 2.
3. Fix some comment.

Gu Zheng (4):
  x86, acpi, cpu-hotplug: Enable acpi to register all possible cpus at
    boot time.
  x86, acpi, cpu-hotplug: Introduce cpuid_to_apicid[] array to store
    persistent cpuid <-> apicid mapping.
  x86, acpi, cpu-hotplug: Enable MADT APIs to return disabled apicid.
  x86, acpi, cpu-hotplug: Set persistent cpuid <-> nodeid mapping when
    booting.

Tang Chen (1):
  x86, memhp, numa: Online memory-less nodes at boot time.

 arch/ia64/kernel/acpi.c       |   2 +-
 arch/x86/include/asm/mpspec.h |   1 +
 arch/x86/kernel/acpi/boot.c   |   8 ++-
 arch/x86/kernel/apic/apic.c   |  85 +++++++++++++++++++++++++----
 arch/x86/mm/numa.c            |  27 +++++-----
 drivers/acpi/acpi_processor.c |   5 +-
 drivers/acpi/bus.c            |   3 ++
 drivers/acpi/processor_core.c | 122 ++++++++++++++++++++++++++++++++++--------
 include/linux/acpi.h          |   2 +
 9 files changed, 204 insertions(+), 51 deletions(-)

-- 
1.9.3

[RESEND PATCH v5 1/5] x86, memhp, numa: Online memory-less nodes at boot time.

[Zhu Guihua]

From: Tang Chen <tangchen@cn.fujitsu.com>

For now, x86 does not support memory-less node. A node without memory
will not be onlined, and the cpus on it will be mapped to the other
online nodes with memory in init_cpu_to_node(). The reason of doing this
is to ensure each cpu has mapped to a node with memory, so that it will
be able to allocate local memory for that cpu.

But we don't have to do it in this way.

In this series of patches, we are going to construct cpu <-> node mapping
for all possible cpus at boot time, which is a 1-1 mapping. It means the
cpu will be mapped to the node it belongs to, and will never be changed.
If a node has only cpus but no memory, the cpus on it will be mapped to
a memory-less node. And the memory-less node should be onlined.

This patch allocate pgdats for all memory-less nodes and online them at
boot time. Then build zonelists for these nodes. As a result, when cpus
on these memory-less nodes try to allocate memory from local node, it
will automatically fall back to the proper zones in the zonelists.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
---
 arch/x86/mm/numa.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index d04f809..baf3d72 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -704,22 +704,19 @@ void __init x86_numa_init(void)
 	numa_init(dummy_numa_init);
 }
 
-static __init int find_near_online_node(int node)
+static void __init init_memory_less_node(int nid)
 {
-	int n, val;
-	int min_val = INT_MAX;
-	int best_node = -1;
+	unsigned long zones_size[MAX_NR_ZONES] = {0};
+	unsigned long zholes_size[MAX_NR_ZONES] = {0};
 
-	for_each_online_node(n) {
-		val = node_distance(node, n);
+	/* Allocate and initialize node data. Memory-less node is now online.*/
+	alloc_node_data(nid);
+	free_area_init_node(nid, zones_size, 0, zholes_size);
 
-		if (val < min_val) {
-			min_val = val;
-			best_node = n;
-		}
-	}
-
-	return best_node;
+	/*
+	 * All zonelists will be built later in start_kernel() after per cpu
+	 * areas are initialized.
+	 */
 }
 
 /*
@@ -748,8 +745,10 @@ void __init init_cpu_to_node(void)
 
 		if (node == NUMA_NO_NODE)
 			continue;
+
 		if (!node_online(node))
-			node = find_near_online_node(node);
+			init_memory_less_node(node);
+
 		numa_set_node(cpu, node);
 	}
 }
-- 
1.9.3

[RESEND PATCH v5 2/5] x86, acpi, cpu-hotplug: Enable acpi to register all possible cpus at boot time.

[Zhu Guihua]

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

[Problem]

cpuid <-> nodeid mapping is firstly established at boot time. And workqueue caches
the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.

When doing node online/offline, cpuid <-> nodeid mapping is established/destroyed,
which means, cpuid <-> nodeid mapping will change if node hotplug happens. But
workqueue does not update wq_numa_possible_cpumask.

So here is the problem:

Assume we have the following cpuid <-> nodeid in the beginning:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89
node 2 | 30-44, 90-104
node 3 | 45-59, 105-119

and we hot-remove node2 and node3, it becomes:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89

and we hot-add node4 and node5, it becomes:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89
node 4 | 30-59
node 5 | 90-119

But in wq_numa_possible_cpumask, cpu30 is still mapped to node2, and the like.

When a pool workqueue is initialized, if its cpumask belongs to a node, its
pool->node will be mapped to that node. And memory used by this workqueue will
also be allocated on that node.

static struct worker_pool *get_unbound_pool(const struct workqueue_attrs *attrs){
...
        /* if cpumask is contained inside a NUMA node, we belong to that node */
        if (wq_numa_enabled) {
                for_each_node(node) {
                        if (cpumask_subset(pool->attrs->cpumask,
                                           wq_numa_possible_cpumask[node])) {
                                pool->node = node;
                                break;
                        }
                }
        }

Since wq_numa_possible_cpumask is not updated, it could be mapped to an offline node,
which will lead to memory allocation failure:

 SLUB: Unable to allocate memory on node 2 (gfp=0x80d0)
  cache: kmalloc-192, object size: 192, buffer size: 192, default order: 1, min order: 0
  node 0: slabs: 6172, objs: 259224, free: 245741
  node 1: slabs: 3261, objs: 136962, free: 127656

It happens here:

create_worker(struct worker_pool *pool)
 |--> worker = alloc_worker(pool->node);

static struct worker *alloc_worker(int node)
{
        struct worker *worker;

        worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, node); --> Here, useing the wrong node.

        ......

        return worker;
}

[Solution]

There are four mappings in the kernel:
1. nodeid (logical node id)   <->   pxm
2. apicid (physical cpu id)   <->   nodeid
3. cpuid (logical cpu id)     <->   apicid
4. cpuid (logical cpu id)     <->   nodeid

1. pxm (proximity domain) is provided by ACPI firmware in SRAT, and nodeid <-> pxm
   mapping is setup at boot time. This mapping is persistent, won't change.

2. apicid <-> nodeid mapping is setup using info in 1. The mapping is setup at boot
   time and CPU hotadd time, and cleared at CPU hotremove time. This mapping is also
   persistent.

3. cpuid <-> apicid mapping is setup at boot time and CPU hotadd time. cpuid is
   allocated, lower ids first, and released at CPU hotremove time, reused for other
   hotadded CPUs. So this mapping is not persistent.

4. cpuid <-> nodeid mapping is also setup at boot time and CPU hotadd time, and
   cleared at CPU hotremove time. As a result of 3, this mapping is not persistent.

To fix this problem, we establish cpuid <-> nodeid mapping for all the possible
cpus at boot time, and make it persistent. And according to init_cpu_to_node(),
cpuid <-> nodeid mapping is based on apicid <-> nodeid mapping and cpuid <-> apicid
mapping. So the key point is obtaining all cpus' apicid.

apicid can be obtained by _MAT (Multiple APIC Table Entry) method or found in
MADT (Multiple APIC Description Table). So we finish the job in the following steps:

1. Enable apic registeration flow to handle both enabled and disabled cpus.
   This is done by introducing an extra parameter to generic_processor_info to let the
   caller control if disabled cpus are ignored.

2. Introduce a new array storing all possible cpuid <-> apicid mapping. And also modify
   the way cpuid is calculated. Establish all possible cpuid <-> apicid mapping when
   registering local apic. Store the mapping in this array.

3. Enable _MAT and MADT relative apis to return non-presnet or disabled cpus' apicid.
   This is also done by introducing an extra parameter to these apis to let the caller
   control if disabled cpus are ignored.

4. Establish all possible cpuid <-> nodeid mapping.
   This is done via an additional acpi namespace walk for processors.

This patch finished step 1.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
---
 arch/x86/kernel/apic/apic.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8a5cdda..1625778 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1998,7 +1998,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-int generic_processor_info(int apicid, int version)
+static int __generic_processor_info(int apicid, int version, bool enabled)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
@@ -2032,7 +2032,8 @@ int generic_processor_info(int apicid, int version)
 			   " Processor %d/0x%x ignored.\n",
 			   thiscpu, apicid);
 
-		disabled_cpus++;
+		if (enabled)
+			disabled_cpus++;
 		return -ENODEV;
 	}
 
@@ -2049,7 +2050,8 @@ int generic_processor_info(int apicid, int version)
 			" reached. Keeping one slot for boot cpu."
 			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
 
-		disabled_cpus++;
+		if (enabled)
+			disabled_cpus++;
 		return -ENODEV;
 	}
 
@@ -2060,11 +2062,14 @@ int generic_processor_info(int apicid, int version)
 			"ACPI: NR_CPUS/possible_cpus limit of %i reached."
 			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
 
-		disabled_cpus++;
+		if (enabled)
+			disabled_cpus++;
 		return -EINVAL;
 	}
 
-	num_processors++;
+	if (enabled)
+		num_processors++;
+
 	if (apicid == boot_cpu_physical_apicid) {
 		/*
 		 * x86_bios_cpu_apicid is required to have processors listed
@@ -2092,7 +2097,8 @@ int generic_processor_info(int apicid, int version)
 			apic_version[boot_cpu_physical_apicid], cpu, version);
 	}
 
-	physid_set(apicid, phys_cpu_present_map);
+	if (enabled)
+		physid_set(apicid, phys_cpu_present_map);
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
@@ -2105,11 +2111,17 @@ int generic_processor_info(int apicid, int version)
 		apic->x86_32_early_logical_apicid(cpu);
 #endif
 	set_cpu_possible(cpu, true);
-	set_cpu_present(cpu, true);
+	if (enabled)
+		set_cpu_present(cpu, true);
 
 	return cpu;
 }
 
+int generic_processor_info(int apicid, int version)
+{
+	return __generic_processor_info(apicid, version, true);
+}
+
 int hard_smp_processor_id(void)
 {
 	return read_apic_id();
-- 
1.9.3

[RESEND PATCH v5 3/5] x86, acpi, cpu-hotplug: Introduce cpuid_to_apicid[] array to store persistent cpuid <-> apicid mapping.

[Zhu Guihua]

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-presnet or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.

This patch finishes step 2.

In this patch, we introduce a new static array named cpuid_to_apicid[],
which is large enough to store info for all possible cpus.

And then, we modify the cpuid calculation. In generic_processor_info(),
it simply finds the next unused cpuid. And it is also why the cpuid <-> nodeid
mapping changes with node hotplug.

After this patch, we find the next unused cpuid, map it to an apicid,
and store the mapping in cpuid_to_apicid[], so that cpuid <-> apicid
mapping will be persistent.

And finally we will use this array to make cpuid <-> nodeid persistent.

cpuid <-> apicid mapping is established at local apic registeration time.
But non-present or disabled cpus are ignored.

In this patch, we establish all possible cpuid <-> apicid mapping when
registering local apic.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
---
 arch/x86/include/asm/mpspec.h |  1 +
 arch/x86/kernel/acpi/boot.c   |  6 ++---
 arch/x86/kernel/apic/apic.c   | 61 ++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 61 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index b07233b..db902d8 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -86,6 +86,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #endif
 
 int generic_processor_info(int apicid, int version);
+int __generic_processor_info(int apicid, int version, bool enabled);
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_LOCAL_APIC)
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index e759076..0ce06ee 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -174,15 +174,13 @@ static int acpi_register_lapic(int id, u8 enabled)
 		return -EINVAL;
 	}
 
-	if (!enabled) {
+	if (!enabled)
 		++disabled_cpus;
-		return -EINVAL;
-	}
 
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
 
-	return generic_processor_info(id, ver);
+	return __generic_processor_info(id, ver, enabled);
 }
 
 static int __init
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 1625778..4822cda 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1998,7 +1998,53 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-static int __generic_processor_info(int apicid, int version, bool enabled)
+/*
+ * The number of allocated logical CPU IDs. Since logical CPU IDs are allocated
+ * contiguously, it equals to current allocated max logical CPU ID plus 1.
+ * All allocated CPU ID should be in [0, nr_logical_cpuidi), so the maximum of
+ * nr_logical_cpuids is nr_cpu_ids.
+ *
+ * NOTE: Reserve 0 for BSP.
+ */
+static int nr_logical_cpuids = 1;
+
+/*
+ * Used to store mapping between logical CPU IDs and APIC IDs.
+ */
+static int cpuid_to_apicid[] = {
+	[0 ... NR_CPUS - 1] = -1,
+};
+
+/*
+ * Should use this API to allocate logical CPU IDs to keep nr_logical_cpuids
+ * and cpuid_to_apicid[] synchronized.
+ */
+static int allocate_logical_cpuid(int apicid)
+{
+	int i;
+
+	/*
+	 * cpuid <-> apicid mapping is persistent, so when a cpu is up,
+	 * check if the kernel has allocated a cpuid for it.
+	 */
+	for (i = 0; i < nr_logical_cpuids; i++) {
+		if (cpuid_to_apicid[i] == apicid)
+			return i;
+	}
+
+	/* Allocate a new cpuid. */
+	if (nr_logical_cpuids >= nr_cpu_ids) {
+		WARN_ONCE(1, "Only %d processors supported."
+			     "Processor %d/0x%x and the rest are ignored.\n",
+			     nr_cpu_ids - 1, nr_logical_cpuids, apicid);
+		return -1;
+	}
+
+	cpuid_to_apicid[nr_logical_cpuids] = apicid;
+	return nr_logical_cpuids++;
+}
+
+int __generic_processor_info(int apicid, int version, bool enabled)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
@@ -2079,8 +2125,17 @@ static int __generic_processor_info(int apicid, int version, bool enabled)
 		 * for BSP.
 		 */
 		cpu = 0;
-	} else
-		cpu = cpumask_next_zero(-1, cpu_present_mask);
+
+		/* Logical cpuid 0 is reserved for BSP. */
+		cpuid_to_apicid[0] = apicid;
+	} else {
+		cpu = allocate_logical_cpuid(apicid);
+		if (cpu < 0) {
+			if (enabled)
+				disabled_cpus++;
+			return -EINVAL;
+		}
+	}
 
 	/*
 	 * Validate version
-- 
1.9.3

[RESEND PATCH v5 4/5] x86, acpi, cpu-hotplug: Enable MADT APIs to return disabled apicid.

[Zhu Guihua]

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-presnet or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.

This patch finishes step 3.

There are four mappings in the kernel:
1. nodeid (logical node id)   <->   pxm        (persistent)
2. apicid (physical cpu id)   <->   nodeid     (persistent)
3. cpuid (logical cpu id)     <->   apicid     (not persistent, now persistent by step 2)
4. cpuid (logical cpu id)     <->   nodeid     (not persistent)

So, in order to setup persistent cpuid <-> nodeid mapping for all possible CPUs,
we should:
1. Setup cpuid <-> apicid mapping for all possible CPUs, which has been done in step 1, 2.
2. Setup cpuid <-> nodeid mapping for all possible CPUs. But before that, we should
   obtain all apicids from MADT.

All processors' apicids can be obtained by _MAT method or from MADT in ACPI.
The current code ignores disabled processors and returns -ENODEV.

After this patch, a new parameter will be added to MADT APIs so that caller
is able to control if disabled processors are ignored.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
---
 drivers/acpi/acpi_processor.c |  5 +++-
 drivers/acpi/processor_core.c | 57 +++++++++++++++++++++++++++----------------
 2 files changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 6979186..d30111a 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -300,8 +300,11 @@ static int acpi_processor_get_info(struct acpi_device *device)
 	 *  Extra Processor objects may be enumerated on MP systems with
 	 *  less than the max # of CPUs. They should be ignored _iff
 	 *  they are physically not present.
+	 *
+	 *  NOTE: Even if the processor has a cpuid, it may not present because
+	 *  cpuid <-> apicid mapping is persistent now.
 	 */
-	if (invalid_logical_cpuid(pr->id)) {
+	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
 		int ret = acpi_processor_hotadd_init(pr);
 		if (ret)
 			return ret;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 33a38d6..824b98b 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -32,12 +32,12 @@ static struct acpi_table_madt *get_madt_table(void)
 }
 
 static int map_lapic_id(struct acpi_subtable_header *entry,
-		 u32 acpi_id, phys_cpuid_t *apic_id)
+		 u32 acpi_id, phys_cpuid_t *apic_id, bool ignore_disabled)
 {
 	struct acpi_madt_local_apic *lapic =
 		container_of(entry, struct acpi_madt_local_apic, header);
 
-	if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
+	if (ignore_disabled && !(lapic->lapic_flags & ACPI_MADT_ENABLED))
 		return -ENODEV;
 
 	if (lapic->processor_id != acpi_id)
@@ -48,12 +48,13 @@ static int map_lapic_id(struct acpi_subtable_header *entry,
 }
 
 static int map_x2apic_id(struct acpi_subtable_header *entry,
-		int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
+		int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id,
+		bool ignore_disabled)
 {
 	struct acpi_madt_local_x2apic *apic =
 		container_of(entry, struct acpi_madt_local_x2apic, header);
 
-	if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
+	if (ignore_disabled && !(apic->lapic_flags & ACPI_MADT_ENABLED))
 		return -ENODEV;
 
 	if (device_declaration && (apic->uid == acpi_id)) {
@@ -65,12 +66,13 @@ static int map_x2apic_id(struct acpi_subtable_header *entry,
 }
 
 static int map_lsapic_id(struct acpi_subtable_header *entry,
-		int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
+		int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id,
+		bool ignore_disabled)
 {
 	struct acpi_madt_local_sapic *lsapic =
 		container_of(entry, struct acpi_madt_local_sapic, header);
 
-	if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
+	if (ignore_disabled && !(lsapic->lapic_flags & ACPI_MADT_ENABLED))
 		return -ENODEV;
 
 	if (device_declaration) {
@@ -87,12 +89,13 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
  * Retrieve the ARM CPU physical identifier (MPIDR)
  */
 static int map_gicc_mpidr(struct acpi_subtable_header *entry,
-		int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr)
+		int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr,
+		bool ignore_disabled)
 {
 	struct acpi_madt_generic_interrupt *gicc =
 	    container_of(entry, struct acpi_madt_generic_interrupt, header);
 
-	if (!(gicc->flags & ACPI_MADT_ENABLED))
+	if (ignore_disabled && !(gicc->flags & ACPI_MADT_ENABLED))
 		return -ENODEV;
 
 	/* device_declaration means Device object in DSDT, in the
@@ -108,7 +111,7 @@ static int map_gicc_mpidr(struct acpi_subtable_header *entry,
 	return -EINVAL;
 }
 
-static phys_cpuid_t map_madt_entry(int type, u32 acpi_id)
+static phys_cpuid_t map_madt_entry(int type, u32 acpi_id, bool ignore_disabled)
 {
 	unsigned long madt_end, entry;
 	phys_cpuid_t phys_id = PHYS_CPUID_INVALID;	/* CPU hardware ID */
@@ -128,16 +131,20 @@ static phys_cpuid_t map_madt_entry(int type, u32 acpi_id)
 		struct acpi_subtable_header *header =
 			(struct acpi_subtable_header *)entry;
 		if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
-			if (!map_lapic_id(header, acpi_id, &phys_id))
+			if (!map_lapic_id(header, acpi_id, &phys_id,
+					  ignore_disabled))
 				break;
 		} else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
-			if (!map_x2apic_id(header, type, acpi_id, &phys_id))
+			if (!map_x2apic_id(header, type, acpi_id, &phys_id,
+					   ignore_disabled))
 				break;
 		} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
-			if (!map_lsapic_id(header, type, acpi_id, &phys_id))
+			if (!map_lsapic_id(header, type, acpi_id, &phys_id,
+					   ignore_disabled))
 				break;
 		} else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
-			if (!map_gicc_mpidr(header, type, acpi_id, &phys_id))
+			if (!map_gicc_mpidr(header, type, acpi_id, &phys_id,
+					    ignore_disabled))
 				break;
 		}
 		entry += header->length;
@@ -145,7 +152,8 @@ static phys_cpuid_t map_madt_entry(int type, u32 acpi_id)
 	return phys_id;
 }
 
-static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
+static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id,
+				  bool ignore_disabled)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
@@ -166,30 +174,37 @@ static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
 
 	header = (struct acpi_subtable_header *)obj->buffer.pointer;
 	if (header->type == ACPI_MADT_TYPE_LOCAL_APIC)
-		map_lapic_id(header, acpi_id, &phys_id);
+		map_lapic_id(header, acpi_id, &phys_id, ignore_disabled);
 	else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC)
-		map_lsapic_id(header, type, acpi_id, &phys_id);
+		map_lsapic_id(header, type, acpi_id, &phys_id, ignore_disabled);
 	else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
-		map_x2apic_id(header, type, acpi_id, &phys_id);
+		map_x2apic_id(header, type, acpi_id, &phys_id, ignore_disabled);
 	else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT)
-		map_gicc_mpidr(header, type, acpi_id, &phys_id);
+		map_gicc_mpidr(header, type, acpi_id, &phys_id,
+			       ignore_disabled);
 
 exit:
 	kfree(buffer.pointer);
 	return phys_id;
 }
 
-phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
+static phys_cpuid_t __acpi_get_phys_id(acpi_handle handle, int type,
+				       u32 acpi_id, bool ignore_disabled)
 {
 	phys_cpuid_t phys_id;
 
-	phys_id = map_mat_entry(handle, type, acpi_id);
+	phys_id = map_mat_entry(handle, type, acpi_id, ignore_disabled);
 	if (invalid_phys_cpuid(phys_id))
-		phys_id = map_madt_entry(type, acpi_id);
+		phys_id = map_madt_entry(type, acpi_id, ignore_disabled);
 
 	return phys_id;
 }
 
+phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
+{
+	return __acpi_get_phys_id(handle, type, acpi_id, true);
+}
+
 int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id)
 {
 #ifdef CONFIG_SMP
-- 
1.9.3

[RESEND PATCH v5 5/5] x86, acpi, cpu-hotplug: Set persistent cpuid <-> nodeid mapping when booting.

[Zhu Guihua]

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-presnet or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.

This patch finishes step 4.

This patch set the persistent cpuid <-> nodeid mapping for all enabled/disabled
processors at boot time via an additional acpi namespace walk for processors.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
---
 arch/ia64/kernel/acpi.c       |  2 +-
 arch/x86/kernel/acpi/boot.c   |  2 +-
 drivers/acpi/bus.c            |  3 ++
 drivers/acpi/processor_core.c | 65 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h          |  2 ++
 5 files changed, 72 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index b1698bc..7db5563 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -796,7 +796,7 @@ int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
  *  ACPI based hotplug CPU support
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
-static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	/*
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 0ce06ee..7d45261 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -696,7 +696,7 @@ static void __init acpi_set_irq_model_ioapic(void)
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 #include <acpi/processor.h>
 
-static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int nid;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 891c42d..d92f45f 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1096,6 +1096,9 @@ static int __init acpi_init(void)
 	acpi_sleep_proc_init();
 	acpi_wakeup_device_init();
 	acpi_debugger_init();
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	acpi_set_processor_mapping();
+#endif
 	return 0;
 }
 
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 824b98b..45580ff 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -261,6 +261,71 @@ int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
 }
 EXPORT_SYMBOL_GPL(acpi_get_cpuid);
 
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+static bool map_processor(acpi_handle handle, int *phys_id, int *cpuid)
+{
+	int type;
+	u32 acpi_id;
+	acpi_status status;
+	acpi_object_type acpi_type;
+	unsigned long long tmp;
+	union acpi_object object = { 0 };
+	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
+
+	status = acpi_get_type(handle, &acpi_type);
+	if (ACPI_FAILURE(status))
+		return false;
+
+	switch (acpi_type) {
+	case ACPI_TYPE_PROCESSOR:
+		status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = object.processor.proc_id;
+		break;
+	case ACPI_TYPE_DEVICE:
+		status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = tmp;
+		break;
+	default:
+		return false;
+	}
+
+	type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
+
+	*phys_id = __acpi_get_phys_id(handle, type, acpi_id, false);
+	*cpuid = acpi_map_cpuid(*phys_id, acpi_id);
+	if (*cpuid == -1)
+		return false;
+
+	return true;
+}
+
+static acpi_status __init
+set_processor_node_mapping(acpi_handle handle, u32 lvl, void *context,
+			   void **rv)
+{
+	u32 apic_id;
+	int cpu_id;
+
+	if (!map_processor(handle, &apic_id, &cpu_id))
+		return AE_ERROR;
+
+	acpi_map_cpu2node(handle, cpu_id, apic_id);
+	return AE_OK;
+}
+
+void __init acpi_set_processor_mapping(void)
+{
+	/* Set persistent cpu <-> node mapping for all processors. */
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX, set_processor_node_mapping,
+			    NULL, NULL, NULL);
+}
+#endif
+
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
 static int get_ioapic_id(struct acpi_subtable_header *entry, u32 gsi_base,
 			 u64 *phys_addr, int *ioapic_id)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 06ed7e5..080755a 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -265,6 +265,8 @@ static inline bool invalid_phys_cpuid(phys_cpuid_t phys_id)
 /* Arch dependent functions for cpu hotplug support */
 int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu);
 int acpi_unmap_cpu(int cpu);
+void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid);
+void __init acpi_set_processor_mapping(void);
 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
-- 
1.9.3

Re: [RESEND PATCH v5 0/5] Make cpuid <-> nodeid mapping persistent

[Zhu Guihua]

Hi Thomas, Ingo, hpa,

Would you please help to review the X86 part of this patch-set ?

Thanks,
Zhu

On 03/03/2016 09:42 AM, Zhu Guihua wrote:
> [Problem]
>
> cpuid <-> nodeid mapping is firstly established at boot time. And workqueue caches
> the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.
>
> When doing node online/offline, cpuid <-> nodeid mapping is established/destroyed,
> which means, cpuid <-> nodeid mapping will change if node hotplug happens. But
> workqueue does not update wq_numa_possible_cpumask.
>
> So here is the problem:
>
> Assume we have the following cpuid <-> nodeid in the beginning:
>
>    Node | CPU
> ------------------------
> node 0 |  0-14, 60-74
> node 1 | 15-29, 75-89
> node 2 | 30-44, 90-104
> node 3 | 45-59, 105-119
>
> and we hot-remove node2 and node3, it becomes:
>
>    Node | CPU
> ------------------------
> node 0 |  0-14, 60-74
> node 1 | 15-29, 75-89
>
> and we hot-add node4 and node5, it becomes:
>
>    Node | CPU
> ------------------------
> node 0 |  0-14, 60-74
> node 1 | 15-29, 75-89
> node 4 | 30-59
> node 5 | 90-119
>
> But in wq_numa_possible_cpumask, cpu30 is still mapped to node2, and the like.
>
> When a pool workqueue is initialized, if its cpumask belongs to a node, its
> pool->node will be mapped to that node. And memory used by this workqueue will
> also be allocated on that node.
>
> static struct worker_pool *get_unbound_pool(const struct workqueue_attrs *attrs){
> ...
>          /* if cpumask is contained inside a NUMA node, we belong to that node */
>          if (wq_numa_enabled) {
>                  for_each_node(node) {
>                          if (cpumask_subset(pool->attrs->cpumask,
>                                             wq_numa_possible_cpumask[node])) {
>                                  pool->node = node;
>                                  break;
>                          }
>                  }
>          }
>
> Since wq_numa_possible_cpumask is not updated, it could be mapped to an offline node,
> which will lead to memory allocation failure:
>
>   SLUB: Unable to allocate memory on node 2 (gfp=0x80d0)
>    cache: kmalloc-192, object size: 192, buffer size: 192, default order: 1, min order: 0
>    node 0: slabs: 6172, objs: 259224, free: 245741
>    node 1: slabs: 3261, objs: 136962, free: 127656
>
> It happens here:
>
> create_worker(struct worker_pool *pool)
>   |--> worker = alloc_worker(pool->node);
>
> static struct worker *alloc_worker(int node)
> {
>          struct worker *worker;
>
>          worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, node); --> Here, useing the wrong node.
>
>          ......
>
>          return worker;
> }
>
>
> [Solution]
>
> There are four mappings in the kernel:
> 1. nodeid (logical node id)   <->   pxm
> 2. apicid (physical cpu id)   <->   nodeid
> 3. cpuid (logical cpu id)     <->   apicid
> 4. cpuid (logical cpu id)     <->   nodeid
>
> 1. pxm (proximity domain) is provided by ACPI firmware in SRAT, and nodeid <-> pxm
>     mapping is setup at boot time. This mapping is persistent, won't change.
>
> 2. apicid <-> nodeid mapping is setup using info in 1. The mapping is setup at boot
>     time and CPU hotadd time, and cleared at CPU hotremove time. This mapping is also
>     persistent.
>
> 3. cpuid <-> apicid mapping is setup at boot time and CPU hotadd time. cpuid is
>     allocated, lower ids first, and released at CPU hotremove time, reused for other
>     hotadded CPUs. So this mapping is not persistent.
>
> 4. cpuid <-> nodeid mapping is also setup at boot time and CPU hotadd time, and
>     cleared at CPU hotremove time. As a result of 3, this mapping is not persistent.
>
> To fix this problem, we establish cpuid <-> nodeid mapping for all the possible
> cpus at boot time, and make it persistent. And according to init_cpu_to_node(),
> cpuid <-> nodeid mapping is based on apicid <-> nodeid mapping and cpuid <-> apicid
> mapping. So the key point is obtaining all cpus' apicid.
>
> apicid can be obtained by _MAT (Multiple APIC Table Entry) method or found in
> MADT (Multiple APIC Description Table). So we finish the job in the following steps:
>
> 1. Enable apic registeration flow to handle both enabled and disabled cpus.
>     This is done by introducing an extra parameter to generic_processor_info to let the
>     caller control if disabled cpus are ignored.
>
> 2. Introduce a new array storing all possible cpuid <-> apicid mapping. And also modify
>     the way cpuid is calculated. Establish all possible cpuid <-> apicid mapping when
>     registering local apic. Store the mapping in this array.
>
> 3. Enable _MAT and MADT relative apis to return non-presnet or disabled cpus' apicid.
>     This is also done by introducing an extra parameter to these apis to let the caller
>     control if disabled cpus are ignored.
>
> 4. Establish all possible cpuid <-> nodeid mapping.
>     This is done via an additional acpi namespace walk for processors.
>
>
> For previous discussion, please refer to:
> https://lkml.org/lkml/2015/2/27/145
> https://lkml.org/lkml/2015/3/25/989
> https://lkml.org/lkml/2015/5/14/244
> https://lkml.org/lkml/2015/7/7/200
> https://lkml.org/lkml/2015/9/27/209
>
> Change log v4 -> v5:
> 1. Remove useless code in patch 1.
> 2. Small improvement of commit message.
>
> Change log v3 -> v4:
> 1. Fix the kernel panic at boot time. The cause is that I tried to build zonelists
>     before per cpu areas were initialized.
>
> Change log v2 -> v3:
> 1. Online memory-less nodes at boot time to map cpus of memory-less nodes.
> 2. Build zonelists for memory-less nodes so that memory allocator will fall
>     back to proper nodes automatically.
>
> Change log v1 -> v2:
> 1. Split code movement and actual changes. Add patch 1.
> 2. Synchronize best near online node record when node hotplug happens. In patch 2.
> 3. Fix some comment.
>
> Gu Zheng (4):
>    x86, acpi, cpu-hotplug: Enable acpi to register all possible cpus at
>      boot time.
>    x86, acpi, cpu-hotplug: Introduce cpuid_to_apicid[] array to store
>      persistent cpuid <-> apicid mapping.
>    x86, acpi, cpu-hotplug: Enable MADT APIs to return disabled apicid.
>    x86, acpi, cpu-hotplug: Set persistent cpuid <-> nodeid mapping when
>      booting.
>
> Tang Chen (1):
>    x86, memhp, numa: Online memory-less nodes at boot time.
>
>   arch/ia64/kernel/acpi.c       |   2 +-
>   arch/x86/include/asm/mpspec.h |   1 +
>   arch/x86/kernel/acpi/boot.c   |   8 ++-
>   arch/x86/kernel/apic/apic.c   |  85 +++++++++++++++++++++++++----
>   arch/x86/mm/numa.c            |  27 +++++-----
>   drivers/acpi/acpi_processor.c |   5 +-
>   drivers/acpi/bus.c            |   3 ++
>   drivers/acpi/processor_core.c | 122 ++++++++++++++++++++++++++++++++++--------
>   include/linux/acpi.h          |   2 +
>   9 files changed, 204 insertions(+), 51 deletions(-)
>

Re: [RESEND PATCH v5 0/5] Make cpuid <-> nodeid mapping persistent

[Rafael J. Wysocki]

Hi,

On Thu, Mar 3, 2016 at 2:42 AM, Zhu Guihua <zhugh.fnst@cn.fujitsu.com> wrote:
> [Problem]
>
> cpuid <-> nodeid mapping is firstly established at boot time. And workqueue caches
> the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.
>
> When doing node online/offline, cpuid <-> nodeid mapping is established/destroyed,
> which means, cpuid <-> nodeid mapping will change if node hotplug happens. But
> workqueue does not update wq_numa_possible_cpumask.
>

Are there any changes in this version relative to the previous one?

Thanks,
Rafael

Re: [RESEND PATCH v5 5/5] x86, acpi, cpu-hotplug: Set persistent cpuid <-> nodeid mapping when booting.

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1490 bytes --]

Hi Gu,

[auto build test ERROR on tip/x86/core]
[also build test ERROR on v4.5-rc6 next-20160302]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Zhu-Guihua/Make-cpuid-nodeid-mapping-persistent/20160303-094713
config: ia64-allyesconfig (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=ia64 

All errors (new ones prefixed by >>):

>> arch/ia64/kernel/acpi.c:799:5: error: conflicting types for 'acpi_map_cpu2node'
    int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
        ^
   In file included from arch/ia64/kernel/acpi.c:43:0:
   include/linux/acpi.h:268:6: note: previous declaration of 'acpi_map_cpu2node' was here
    void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid);
         ^

vim +/acpi_map_cpu2node +799 arch/ia64/kernel/acpi.c

   793	}
   794	
   795	/*
   796	 *  ACPI based hotplug CPU support
   797	 */
   798	#ifdef CONFIG_ACPI_HOTPLUG_CPU
 > 799	int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
   800	{
   801	#ifdef CONFIG_ACPI_NUMA
   802		/*

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 45138 bytes --]

Re: [RESEND PATCH v5 0/5] Make cpuid <-> nodeid mapping persistent

[Zhu Guihua]

Hi,

On 03/03/2016 10:08 AM, Rafael J. Wysocki wrote:
> Hi,
>
> On Thu, Mar 3, 2016 at 2:42 AM, Zhu Guihua <zhugh.fnst@cn.fujitsu.com> wrote:
>> [Problem]
>>
>> cpuid <-> nodeid mapping is firstly established at boot time. And workqueue caches
>> the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.
>>
>> When doing node online/offline, cpuid <-> nodeid mapping is established/destroyed,
>> which means, cpuid <-> nodeid mapping will change if node hotplug happens. But
>> workqueue does not update wq_numa_possible_cpumask.
>>
> Are there any changes in this version relative to the previous one?
No, there are no changes in this version.

Thanks,
Zhu

>
> Thanks,
> Rafael
>
>
> .
>

Re: [RESEND PATCH v5 5/5] x86, acpi, cpu-hotplug: Set persistent cpuid <-> nodeid mapping when booting.

[Zhu Guihua]

On 03/03/2016 10:11 AM, kbuild test robot wrote:
> Hi Gu,
>
> [auto build test ERROR on tip/x86/core]
> [also build test ERROR on v4.5-rc6 next-20160302]
> [if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
>
> url:    https://github.com/0day-ci/linux/commits/Zhu-Guihua/Make-cpuid-nodeid-mapping-persistent/20160303-094713
> config: ia64-allyesconfig (attached as .config)
> reproduce:
>          wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
>          chmod +x ~/bin/make.cross
>          # save the attached .config to linux build tree
>          make.cross ARCH=ia64
>
> All errors (new ones prefixed by >>):
>
>>> arch/ia64/kernel/acpi.c:799:5: error: conflicting types for 'acpi_map_cpu2node'
>      int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
>          ^
>     In file included from arch/ia64/kernel/acpi.c:43:0:
>     include/linux/acpi.h:268:6: note: previous declaration of 'acpi_map_cpu2node' was here
>      void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid);
>           ^
>
> vim +/acpi_map_cpu2node +799 arch/ia64/kernel/acpi.c
>
>     793	}
>     794	
>     795	/*
>     796	 *  ACPI based hotplug CPU support
>     797	 */
>     798	#ifdef CONFIG_ACPI_HOTPLUG_CPU
>   > 799	int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
>     800	{
>     801	#ifdef CONFIG_ACPI_NUMA
>     802		/*
>
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Thanks for your test. I will investigate this.

Thanks,
Zhu