From: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel@savoirfairelinux.com,
"David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Jiri Pirko <jiri@resnulli.us>, Scott Feldman <sfeldma@gmail.com>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Subject: [PATCH net-next 3/3] net: dsa: make the VLAN add function return void
Date: Tue, 5 Apr 2016 11:24:35 -0400 [thread overview]
Message-ID: <1459869875-23815-3-git-send-email-vivien.didelot@savoirfairelinux.com> (raw)
In-Reply-To: <1459869875-23815-1-git-send-email-vivien.didelot@savoirfairelinux.com>
The switchdev design implies that a software error should not happen in
the commit phase since it must have been previously reported in the
prepare phase. If an hardware error occurs during the commit phase,
there is nothing switchdev can do about it.
The DSA layer separates port_vlan_prepare and port_vlan_add for
simplicity and convenience. If an hardware error occurs during the
commit phase, there is no need to report it outside the driver itself.
Make the DSA port_vlan_add routine return void for explicitness.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
drivers/net/dsa/mv88e6xxx.c | 26 +++++++++++---------------
drivers/net/dsa/mv88e6xxx.h | 6 +++---
include/net/dsa.h | 2 +-
net/dsa/slave.c | 11 +++--------
4 files changed, 18 insertions(+), 27 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index bca9a2c..2911f91 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1908,31 +1908,27 @@ static int _mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, u16 vid,
return _mv88e6xxx_vtu_loadpurge(ds, &vlan);
}
-int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan,
- struct switchdev_trans *trans)
+void mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
u16 vid;
- int err = 0;
mutex_lock(&ps->smi_mutex);
- for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
- err = _mv88e6xxx_port_vlan_add(ds, port, vid, untagged);
- if (err)
- goto unlock;
- }
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid)
+ if (_mv88e6xxx_port_vlan_add(ds, port, vid, untagged))
+ netdev_warn(ds->ports[port], "cannot add VLAN %d%c\n",
+ vid, untagged ? 'u' : 't');
- /* no PVID with ranges, otherwise it's a bug */
- if (pvid)
- err = _mv88e6xxx_port_pvid_set(ds, port, vlan->vid_end);
-unlock:
- mutex_unlock(&ps->smi_mutex);
+ if (pvid && _mv88e6xxx_port_pvid_set(ds, port, vlan->vid_end))
+ netdev_warn(ds->ports[port], "cannot set PVID %d\n",
+ vlan->vid_end);
- return err;
+ mutex_unlock(&ps->smi_mutex);
}
static int _mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port, u16 vid)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index ece008f..ad59022 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -503,9 +503,9 @@ int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
-int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan,
- struct switchdev_trans *trans);
+void mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans);
int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan);
int mv88e6xxx_port_vlan_dump(struct dsa_switch *ds, int port,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index fa42b8c..071b50d 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -309,7 +309,7 @@ struct dsa_switch_driver {
int (*port_vlan_prepare)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
- int (*port_vlan_add)(struct dsa_switch *ds, int port,
+ void (*port_vlan_add)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
int (*port_vlan_del)(struct dsa_switch *ds, int port,
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 5a34bab..134b76e 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -207,21 +207,16 @@ static int dsa_slave_port_vlan_add(struct net_device *dev,
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
- int err;
if (switchdev_trans_ph_prepare(trans)) {
if (!ds->drv->port_vlan_prepare || !ds->drv->port_vlan_add)
return -EOPNOTSUPP;
- err = ds->drv->port_vlan_prepare(ds, p->port, vlan, trans);
- if (err)
- return err;
- } else {
- err = ds->drv->port_vlan_add(ds, p->port, vlan, trans);
- if (err)
- return err;
+ return ds->drv->port_vlan_prepare(ds, p->port, vlan, trans);
}
+ ds->drv->port_vlan_add(ds, p->port, vlan, trans);
+
return 0;
}
--
2.8.0
next prev parent reply other threads:[~2016-04-05 15:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 15:24 [PATCH net-next 1/3] net: dsa: make the STP state function return void Vivien Didelot
2016-04-05 15:24 ` [PATCH net-next 2/3] net: dsa: make the FDB add " Vivien Didelot
2016-04-05 23:51 ` Andrew Lunn
2016-04-06 3:14 ` Vivien Didelot
2016-04-06 12:54 ` Andrew Lunn
2016-04-06 14:26 ` Vivien Didelot
2016-04-05 15:24 ` Vivien Didelot [this message]
2016-04-05 23:47 ` [PATCH net-next 1/3] net: dsa: make the STP state " Andrew Lunn
2016-04-06 3:16 ` Vivien Didelot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459869875-23815-3-git-send-email-vivien.didelot@savoirfairelinux.com \
--to=vivien.didelot@savoirfairelinux.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=jiri@resnulli.us \
--cc=kernel@savoirfairelinux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sfeldma@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).