From: Mel Gorman <mgorman@techsingularity.net>
To: Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@surriel.com>, Vlastimil Babka <vbabka@suse.cz>,
Johannes Weiner <hannes@cmpxchg.org>,
LKML <linux-kernel@vger.kernel.org>,
Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 17/27] mm: Rename NR_ANON_PAGES to NR_ANON_MAPPED
Date: Wed, 6 Apr 2016 12:20:16 +0100 [thread overview]
Message-ID: <1459941626-3290-18-git-send-email-mgorman@techsingularity.net> (raw)
In-Reply-To: <1459941626-3290-1-git-send-email-mgorman@techsingularity.net>
NR_FILE_PAGES is the number of file pages.
NR_FILE_MAPPED is the number of mapped file pages.
NR_ANON_PAGES is the number of mapped anon pages.
This is unhelpful naming as it's easy to confuse NR_FILE_MAPPED and NR_ANON_PAGES for
mapped pages. This patch renames NR_ANON_PAGES so we have
NR_FILE_PAGES is the number of file pages.
NR_FILE_MAPPED is the number of mapped file pages.
NR_ANON_MAPPED is the number of mapped anon pages.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
---
drivers/base/node.c | 2 +-
fs/proc/meminfo.c | 2 +-
include/linux/mmzone.h | 2 +-
mm/migrate.c | 2 +-
mm/rmap.c | 8 ++++----
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 66aed68a0fdc..897b6bcb36be 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -120,7 +120,7 @@ static ssize_t node_read_meminfo(struct device *dev,
nid, K(sum_zone_node_page_state(nid, NR_WRITEBACK)),
nid, K(sum_zone_node_page_state(nid, NR_FILE_PAGES)),
nid, K(node_page_state(pgdat, NR_FILE_MAPPED)),
- nid, K(node_page_state(pgdat, NR_ANON_PAGES)),
+ nid, K(node_page_state(pgdat, NR_ANON_MAPPED)),
nid, K(i.sharedram),
nid, sum_zone_node_page_state(nid, NR_KERNEL_STACK) *
THREAD_SIZE / 1024,
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index 54e039682ec9..076afb43fc56 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -138,7 +138,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
K(i.freeswap),
K(global_page_state(NR_FILE_DIRTY)),
K(global_page_state(NR_WRITEBACK)),
- K(global_node_page_state(NR_ANON_PAGES)),
+ K(global_node_page_state(NR_ANON_MAPPED)),
K(global_node_page_state(NR_FILE_MAPPED)),
K(i.sharedram),
K(global_page_state(NR_SLAB_RECLAIMABLE) +
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index e7d105259aa6..181dc960fccb 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -160,7 +160,7 @@ enum node_stat_item {
WORKINGSET_REFAULT,
WORKINGSET_ACTIVATE,
WORKINGSET_NODERECLAIM,
- NR_ANON_PAGES, /* Mapped anonymous pages */
+ NR_ANON_MAPPED, /* Mapped anonymous pages */
NR_FILE_MAPPED, /* pagecache pages mapped into pagetables.
only modified from process context */
NR_VM_NODE_STAT_ITEMS
diff --git a/mm/migrate.c b/mm/migrate.c
index 53bb33c570bf..507277571847 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -412,7 +412,7 @@ int migrate_page_move_mapping(struct address_space *mapping,
* new page and drop references to the old page.
*
* Note that anonymous pages are accounted for
- * via NR_FILE_PAGES and NR_ANON_PAGES if they
+ * via NR_FILE_PAGES and NR_ANON_MAPPED if they
* are mapped to swap space.
*/
if (newzone != oldzone) {
diff --git a/mm/rmap.c b/mm/rmap.c
index 0788298025e5..16e57be11e95 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1232,7 +1232,7 @@ void do_page_add_anon_rmap(struct page *page,
NR_ANON_TRANSPARENT_HUGEPAGES);
}
__mod_node_page_state(page_zone(page)->zone_pgdat,
- NR_ANON_PAGES, nr);
+ NR_ANON_MAPPED, nr);
}
if (unlikely(PageKsm(page)))
return;
@@ -1276,7 +1276,7 @@ void page_add_new_anon_rmap(struct page *page,
/* increment count (starts at -1) */
atomic_set(&page->_mapcount, 0);
}
- __mod_node_page_state(page_zone(page)->zone_pgdat, NR_ANON_PAGES, nr);
+ __mod_node_page_state(page_zone(page)->zone_pgdat, NR_ANON_MAPPED, nr);
__page_set_anon_rmap(page, vma, address, 1);
}
@@ -1358,7 +1358,7 @@ static void page_remove_anon_compound_rmap(struct page *page)
clear_page_mlock(page);
if (nr) {
- __mod_node_page_state(page_zone(page)->zone_pgdat, NR_ANON_PAGES, -nr);
+ __mod_node_page_state(page_zone(page)->zone_pgdat, NR_ANON_MAPPED, -nr);
deferred_split_huge_page(page);
}
}
@@ -1390,7 +1390,7 @@ void page_remove_rmap(struct page *page, bool compound)
* these counters are not modified in interrupt context, and
* pte lock(a spinlock) is held, which implies preemption disabled.
*/
- __dec_node_page_state(page, NR_ANON_PAGES);
+ __dec_node_page_state(page, NR_ANON_MAPPED);
if (unlikely(PageMlocked(page)))
clear_page_mlock(page);
--
2.6.4
next prev parent reply other threads:[~2016-04-06 11:22 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-06 11:19 [RFC PATCH 00/27] Move LRU page reclaim from zones to nodes v3 Mel Gorman
2016-04-06 11:20 ` [PATCH 01/27] mm, page_alloc: Use ac->classzone_idx instead of zone_idx(preferred_zone) Mel Gorman
2016-04-06 11:20 ` [PATCH 02/27] mm, vmstat: Add infrastructure for per-node vmstats Mel Gorman
2016-04-06 11:20 ` [PATCH 03/27] mm, vmscan: Move lru_lock to the node Mel Gorman
2016-04-06 11:20 ` [PATCH 04/27] mm, vmscan: Move LRU lists to node Mel Gorman
2016-04-06 11:20 ` [PATCH 05/27] mm, vmscan: Begin reclaiming pages on a per-node basis Mel Gorman
2016-04-06 11:20 ` [PATCH 06/27] mm, vmscan: Have kswapd only scan based on the highest requested zone Mel Gorman
2016-04-06 11:20 ` [PATCH 07/27] mm, vmscan: Make kswapd reclaim in terms of nodes Mel Gorman
2016-04-06 11:20 ` [PATCH 08/27] mm, vmscan: Simplify the logic deciding whether kswapd sleeps Mel Gorman
2016-04-06 11:20 ` [PATCH 09/27] mm, vmscan: By default have direct reclaim only shrink once per node Mel Gorman
2016-04-06 11:20 ` [PATCH 10/27] mm, vmscan: Clear congestion, dirty and need for compaction on a per-node basis Mel Gorman
2016-04-06 11:20 ` [PATCH 11/27] mm: vmscan: Do not reclaim from kswapd if there is any eligible zone Mel Gorman
2016-04-06 11:20 ` [PATCH 12/27] mm, vmscan: Make shrink_node decisions more node-centric Mel Gorman
2016-04-06 11:20 ` [PATCH 13/27] mm, memcg: Move memcg limit enforcement from zones to nodes Mel Gorman
2016-04-06 11:20 ` [PATCH 14/27] mm, workingset: Make working set detection node-aware Mel Gorman
2016-04-06 11:20 ` [PATCH 15/27] mm, page_alloc: Consider dirtyable memory in terms of nodes Mel Gorman
2016-04-06 11:20 ` [PATCH 16/27] mm: Move page mapped accounting to the node Mel Gorman
2016-04-06 11:20 ` Mel Gorman [this message]
2016-04-06 11:20 ` [PATCH 18/27] mm: Move most file-based " Mel Gorman
2016-04-06 11:20 ` [PATCH 19/27] mm: Move vmscan writes and file write " Mel Gorman
2016-04-06 11:20 ` [PATCH 20/27] mm, vmscan: Update classzone_idx if buffer_heads_over_limit Mel Gorman
2016-04-06 11:20 ` [PATCH 21/27] mm, vmscan: Only wakeup kswapd once per node for the requested classzone Mel Gorman
2016-04-15 9:13 [PATCH 00/27] Move LRU page reclaim from zones to nodes v5 Mel Gorman
2016-04-15 9:13 ` [PATCH 17/27] mm: Rename NR_ANON_PAGES to NR_ANON_MAPPED Mel Gorman
2016-06-09 18:04 [PATCH 00/27] Move LRU page reclaim from zones to nodes v6 Mel Gorman
2016-06-09 18:04 ` [PATCH 17/27] mm: Rename NR_ANON_PAGES to NR_ANON_MAPPED Mel Gorman
2016-06-17 8:28 ` Vlastimil Babka
2016-06-21 14:15 [PATCH 00/27] Move LRU page reclaim from zones to nodes v7 Mel Gorman
2016-06-21 14:15 ` [PATCH 17/27] mm: Rename NR_ANON_PAGES to NR_ANON_MAPPED Mel Gorman
2016-06-22 14:28 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459941626-3290-18-git-send-email-mgorman@techsingularity.net \
--to=mgorman@techsingularity.net \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=riel@surriel.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).