* [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq
@ 2023-02-21 15:05 Bartosz Golaszewski
2023-02-21 15:05 ` [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p Bartosz Golaszewski
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Bartosz Golaszewski @ 2023-02-21 15:05 UTC (permalink / raw)
To: Rafael J . Wysocki, Viresh Kumar, Rob Herring,
Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Konrad Dybcio
Cc: linux-pm, devicetree, linux-kernel, linux-arm-msm, Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the new compatible for the cpufreq engine on the sa8775p SoC and
enable it in the .dtsi.
Bartosz Golaszewski (2):
dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p
arm64: dts: qcom: sa8775p: add cpufreq node
.../bindings/cpufreq/cpufreq-qcom-hw.yaml | 1 +
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 21 +++++++++++++++++++
2 files changed, 22 insertions(+)
--
2.37.2
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p
2023-02-21 15:05 [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bartosz Golaszewski
@ 2023-02-21 15:05 ` Bartosz Golaszewski
2023-02-21 15:46 ` Krzysztof Kozlowski
2023-02-21 15:05 ` [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node Bartosz Golaszewski
2023-03-15 23:34 ` (subset) [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bjorn Andersson
2 siblings, 1 reply; 9+ messages in thread
From: Bartosz Golaszewski @ 2023-02-21 15:05 UTC (permalink / raw)
To: Rafael J . Wysocki, Viresh Kumar, Rob Herring,
Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Konrad Dybcio
Cc: linux-pm, devicetree, linux-kernel, linux-arm-msm, Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the compatible for the cpufreq engine present on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
index e4aa8c67d532..92693c33edf9 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -26,6 +26,7 @@ properties:
items:
- enum:
- qcom,qdu1000-cpufreq-epss
+ - qcom,sa8775p-cpufreq-epss
- qcom,sc7280-cpufreq-epss
- qcom,sc8280xp-cpufreq-epss
- qcom,sm6375-cpufreq-epss
--
2.37.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node
2023-02-21 15:05 [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bartosz Golaszewski
2023-02-21 15:05 ` [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p Bartosz Golaszewski
@ 2023-02-21 15:05 ` Bartosz Golaszewski
2023-02-21 17:44 ` Konrad Dybcio
2023-03-06 13:34 ` Bartosz Golaszewski
2023-03-15 23:34 ` (subset) [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bjorn Andersson
2 siblings, 2 replies; 9+ messages in thread
From: Bartosz Golaszewski @ 2023-02-21 15:05 UTC (permalink / raw)
To: Rafael J . Wysocki, Viresh Kumar, Rob Herring,
Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Konrad Dybcio
Cc: linux-pm, devicetree, linux-kernel, linux-arm-msm, Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a node for the cpufreq engine and specify the frequency domains for
all CPUs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index ce5976e36aee..5e2bc67b3178 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -37,6 +37,7 @@ CPU0: cpu@0 {
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -52,6 +53,7 @@ CPU1: cpu@100 {
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -64,6 +66,7 @@ CPU2: cpu@200 {
compatible = "qcom,kryo";
reg = <0x0 0x200>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
compatible = "cache";
@@ -76,6 +79,7 @@ CPU3: cpu@300 {
compatible = "qcom,kryo";
reg = <0x0 0x300>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
compatible = "cache";
@@ -88,6 +92,7 @@ CPU4: cpu@10000 {
compatible = "qcom,kryo";
reg = <0x0 0x10000>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_4>;
L2_4: l2-cache {
compatible = "cache";
@@ -104,6 +109,7 @@ CPU5: cpu@10100 {
compatible = "qcom,kryo";
reg = <0x0 0x10100>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_5>;
L2_5: l2-cache {
compatible = "cache";
@@ -116,6 +122,7 @@ CPU6: cpu@10200 {
compatible = "qcom,kryo";
reg = <0x0 0x10200>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_6>;
L2_6: l2-cache {
compatible = "cache";
@@ -128,6 +135,7 @@ CPU7: cpu@10300 {
compatible = "qcom,kryo";
reg = <0x0 0x10300>;
enable-method = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
next-level-cache = <&L2_7>;
L2_7: l2-cache {
compatible = "cache";
@@ -731,6 +739,19 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,sa8775p-cpufreq-epss",
+ "qcom,cpufreq-epss";
+ reg = <0x0 0x18591000 0x0 0x1000>,
+ <0x0 0x18593000 0x0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
+
tlmm: pinctrl@f000000 {
compatible = "qcom,sa8775p-tlmm";
reg = <0x0 0xf000000 0x0 0x1000000>;
--
2.37.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p
2023-02-21 15:05 ` [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p Bartosz Golaszewski
@ 2023-02-21 15:46 ` Krzysztof Kozlowski
2023-02-23 4:18 ` Viresh Kumar
0 siblings, 1 reply; 9+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-21 15:46 UTC (permalink / raw)
To: Bartosz Golaszewski, Rafael J . Wysocki, Viresh Kumar,
Rob Herring, Krzysztof Kozlowski, Andy Gross, Bjorn Andersson,
Konrad Dybcio
Cc: linux-pm, devicetree, linux-kernel, linux-arm-msm, Bartosz Golaszewski
On 21/02/2023 16:05, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Add the compatible for the cpufreq engine present on sa8775p platforms.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node
2023-02-21 15:05 ` [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node Bartosz Golaszewski
@ 2023-02-21 17:44 ` Konrad Dybcio
2023-02-21 19:25 ` Bartosz Golaszewski
2023-03-06 13:34 ` Bartosz Golaszewski
1 sibling, 1 reply; 9+ messages in thread
From: Konrad Dybcio @ 2023-02-21 17:44 UTC (permalink / raw)
To: Bartosz Golaszewski, Rafael J . Wysocki, Viresh Kumar,
Rob Herring, Krzysztof Kozlowski, Andy Gross, Bjorn Andersson
Cc: linux-pm, devicetree, linux-kernel, linux-arm-msm, Bartosz Golaszewski
On 21.02.2023 16:05, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Add a node for the cpufreq engine and specify the frequency domains for
> all CPUs.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index ce5976e36aee..5e2bc67b3178 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -37,6 +37,7 @@ CPU0: cpu@0 {
> compatible = "qcom,kryo";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 0>;
> next-level-cache = <&L2_0>;
> L2_0: l2-cache {
> compatible = "cache";
> @@ -52,6 +53,7 @@ CPU1: cpu@100 {
> compatible = "qcom,kryo";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 0>;
> next-level-cache = <&L2_1>;
> L2_1: l2-cache {
> compatible = "cache";
> @@ -64,6 +66,7 @@ CPU2: cpu@200 {
> compatible = "qcom,kryo";
> reg = <0x0 0x200>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 0>;
> next-level-cache = <&L2_2>;
> L2_2: l2-cache {
> compatible = "cache";
> @@ -76,6 +79,7 @@ CPU3: cpu@300 {
> compatible = "qcom,kryo";
> reg = <0x0 0x300>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 0>;
> next-level-cache = <&L2_3>;
> L2_3: l2-cache {
> compatible = "cache";
> @@ -88,6 +92,7 @@ CPU4: cpu@10000 {
> compatible = "qcom,kryo";
> reg = <0x0 0x10000>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 1>;
> next-level-cache = <&L2_4>;
> L2_4: l2-cache {
> compatible = "cache";
> @@ -104,6 +109,7 @@ CPU5: cpu@10100 {
> compatible = "qcom,kryo";
> reg = <0x0 0x10100>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 1>;
> next-level-cache = <&L2_5>;
> L2_5: l2-cache {
> compatible = "cache";
> @@ -116,6 +122,7 @@ CPU6: cpu@10200 {
> compatible = "qcom,kryo";
> reg = <0x0 0x10200>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 1>;
> next-level-cache = <&L2_6>;
> L2_6: l2-cache {
> compatible = "cache";
> @@ -128,6 +135,7 @@ CPU7: cpu@10300 {
> compatible = "qcom,kryo";
> reg = <0x0 0x10300>;
> enable-method = "psci";
> + qcom,freq-domain = <&cpufreq_hw 1>;
> next-level-cache = <&L2_7>;
> L2_7: l2-cache {
> compatible = "cache";
> @@ -731,6 +739,19 @@ tcsr_mutex: hwlock@1f40000 {
> #hwlock-cells = <1>;
> };
>
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,sa8775p-cpufreq-epss",
> + "qcom,cpufreq-epss";
That's some very aggressive wrapping! :P
Nevertheless,
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> + reg = <0x0 0x18591000 0x0 0x1000>,
> + <0x0 0x18593000 0x0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> + };
> +
> tlmm: pinctrl@f000000 {
> compatible = "qcom,sa8775p-tlmm";
> reg = <0x0 0xf000000 0x0 0x1000000>;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node
2023-02-21 17:44 ` Konrad Dybcio
@ 2023-02-21 19:25 ` Bartosz Golaszewski
0 siblings, 0 replies; 9+ messages in thread
From: Bartosz Golaszewski @ 2023-02-21 19:25 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Rafael J . Wysocki, Viresh Kumar, Rob Herring,
Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, linux-pm,
devicetree, linux-kernel, linux-arm-msm, Bartosz Golaszewski
On Tue, Feb 21, 2023 at 6:44 PM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 21.02.2023 16:05, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Add a node for the cpufreq engine and specify the frequency domains for
> > all CPUs.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 21 +++++++++++++++++++++
> > 1 file changed, 21 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> > index ce5976e36aee..5e2bc67b3178 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> > @@ -37,6 +37,7 @@ CPU0: cpu@0 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x0>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 0>;
> > next-level-cache = <&L2_0>;
> > L2_0: l2-cache {
> > compatible = "cache";
> > @@ -52,6 +53,7 @@ CPU1: cpu@100 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x100>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 0>;
> > next-level-cache = <&L2_1>;
> > L2_1: l2-cache {
> > compatible = "cache";
> > @@ -64,6 +66,7 @@ CPU2: cpu@200 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x200>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 0>;
> > next-level-cache = <&L2_2>;
> > L2_2: l2-cache {
> > compatible = "cache";
> > @@ -76,6 +79,7 @@ CPU3: cpu@300 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x300>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 0>;
> > next-level-cache = <&L2_3>;
> > L2_3: l2-cache {
> > compatible = "cache";
> > @@ -88,6 +92,7 @@ CPU4: cpu@10000 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x10000>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 1>;
> > next-level-cache = <&L2_4>;
> > L2_4: l2-cache {
> > compatible = "cache";
> > @@ -104,6 +109,7 @@ CPU5: cpu@10100 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x10100>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 1>;
> > next-level-cache = <&L2_5>;
> > L2_5: l2-cache {
> > compatible = "cache";
> > @@ -116,6 +122,7 @@ CPU6: cpu@10200 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x10200>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 1>;
> > next-level-cache = <&L2_6>;
> > L2_6: l2-cache {
> > compatible = "cache";
> > @@ -128,6 +135,7 @@ CPU7: cpu@10300 {
> > compatible = "qcom,kryo";
> > reg = <0x0 0x10300>;
> > enable-method = "psci";
> > + qcom,freq-domain = <&cpufreq_hw 1>;
> > next-level-cache = <&L2_7>;
> > L2_7: l2-cache {
> > compatible = "cache";
> > @@ -731,6 +739,19 @@ tcsr_mutex: hwlock@1f40000 {
> > #hwlock-cells = <1>;
> > };
> >
> > + cpufreq_hw: cpufreq@18591000 {
> > + compatible = "qcom,sa8775p-cpufreq-epss",
> > + "qcom,cpufreq-epss";
> That's some very aggressive wrapping! :P
>
For when all you have is vi on a 80-char wide terminal :D
Bartosz
> Nevertheless,
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
> Konrad
> > + reg = <0x0 0x18591000 0x0 0x1000>,
> > + <0x0 0x18593000 0x0 0x1000>;
> > + reg-names = "freq-domain0", "freq-domain1";
> > +
> > + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> > + clock-names = "xo", "alternate";
> > +
> > + #freq-domain-cells = <1>;
> > + };
> > +
> > tlmm: pinctrl@f000000 {
> > compatible = "qcom,sa8775p-tlmm";
> > reg = <0x0 0xf000000 0x0 0x1000000>;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p
2023-02-21 15:46 ` Krzysztof Kozlowski
@ 2023-02-23 4:18 ` Viresh Kumar
0 siblings, 0 replies; 9+ messages in thread
From: Viresh Kumar @ 2023-02-23 4:18 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Bartosz Golaszewski, Rafael J . Wysocki, Rob Herring,
Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Konrad Dybcio,
linux-pm, devicetree, linux-kernel, linux-arm-msm,
Bartosz Golaszewski
On 21-02-23, 16:46, Krzysztof Kozlowski wrote:
> On 21/02/2023 16:05, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Add the compatible for the cpufreq engine present on sa8775p platforms.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > ---
>
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied. Thanks.
--
viresh
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node
2023-02-21 15:05 ` [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node Bartosz Golaszewski
2023-02-21 17:44 ` Konrad Dybcio
@ 2023-03-06 13:34 ` Bartosz Golaszewski
1 sibling, 0 replies; 9+ messages in thread
From: Bartosz Golaszewski @ 2023-03-06 13:34 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linux-pm, Konrad Dybcio, Viresh Kumar, Rafael J . Wysocki,
devicetree, linux-kernel, linux-arm-msm, Andy Gross,
Krzysztof Kozlowski, Rob Herring, Bartosz Golaszewski
On Tue, Feb 21, 2023 at 4:05 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Add a node for the cpufreq engine and specify the frequency domains for
> all CPUs.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
Bjorn,
Viresh picked up the dt-bindings, so this is the only thing left to go
into the qcom tree.
Bartosz
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: (subset) [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq
2023-02-21 15:05 [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bartosz Golaszewski
2023-02-21 15:05 ` [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p Bartosz Golaszewski
2023-02-21 15:05 ` [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node Bartosz Golaszewski
@ 2023-03-15 23:34 ` Bjorn Andersson
2 siblings, 0 replies; 9+ messages in thread
From: Bjorn Andersson @ 2023-03-15 23:34 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Konrad Dybcio, Viresh Kumar,
Rafael J . Wysocki, Bartosz Golaszewski, Andy Gross
Cc: Bartosz Golaszewski, linux-arm-msm, linux-pm, devicetree, linux-kernel
On Tue, 21 Feb 2023 16:05:41 +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Add the new compatible for the cpufreq engine on the sa8775p SoC and
> enable it in the .dtsi.
>
> Bartosz Golaszewski (2):
> dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p
> arm64: dts: qcom: sa8775p: add cpufreq node
>
> [...]
Applied, thanks!
[2/2] arm64: dts: qcom: sa8775p: add cpufreq node
commit: 5d793ff40692c9b3f88df1820a79ac8ae7d9c80b
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2023-03-15 23:32 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-21 15:05 [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bartosz Golaszewski
2023-02-21 15:05 ` [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a compatible for sa8775p Bartosz Golaszewski
2023-02-21 15:46 ` Krzysztof Kozlowski
2023-02-23 4:18 ` Viresh Kumar
2023-02-21 15:05 ` [PATCH 2/2] arm64: dts: qcom: sa8775p: add cpufreq node Bartosz Golaszewski
2023-02-21 17:44 ` Konrad Dybcio
2023-02-21 19:25 ` Bartosz Golaszewski
2023-03-06 13:34 ` Bartosz Golaszewski
2023-03-15 23:34 ` (subset) [PATCH 0/2] arm64: qcom: sa8775p: enable cpufreq Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).