* [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
@ 2016-04-29 20:40 Marcel Ziswiler
2016-04-29 20:40 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY Marcel Ziswiler
2016-05-03 12:58 ` [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Marcel Ziswiler @ 2016-04-29 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Stefan Agner, Marcel Ziswiler, Russell King, Sascha Hauer,
Shawn Guo, linux-kernel
The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index b255c7f..fb959f9 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -184,6 +184,7 @@ CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_GPIO=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
--
2.5.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
2016-04-29 20:40 [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO Marcel Ziswiler
@ 2016-04-29 20:40 ` Marcel Ziswiler
2016-05-03 12:58 ` [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Marcel Ziswiler @ 2016-04-29 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Stefan Agner, Marcel Ziswiler, Russell King, Sascha Hauer,
Shawn Guo, linux-kernel
The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index fb959f9..71f8384 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -142,6 +142,7 @@ CONFIG_SMC911X=y
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_AT803X_PHY=y
+CONFIG_MICREL_PHY=y
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
--
2.5.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
2016-04-29 20:40 [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO Marcel Ziswiler
2016-04-29 20:40 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY Marcel Ziswiler
@ 2016-05-03 12:58 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2016-05-03 12:58 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: linux-arm-kernel, Stefan Agner, Russell King, Sascha Hauer, linux-kernel
On Fri, Apr 29, 2016 at 10:40:18PM +0200, Marcel Ziswiler wrote:
> The GPIO-based bitbanging I2C driver is required to make HDMI work on
> the Apalis iMX6 module plugged into a Ixora carrier board featuring a
> DDC channel to read a screen's EDID being hooked up to regular GPIOs.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied both, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-05-03 12:58 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-29 20:40 [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO Marcel Ziswiler
2016-04-29 20:40 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY Marcel Ziswiler
2016-05-03 12:58 ` [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).